- replace random access with ranged for
- replace foreach with ranged for
- add qAsConst where possible
- iterate directly over QMap, rather than the keys (address FIXME
comment)
- add some const to ensure that code has no side effects on
containers or indices used in different places
Change-Id: I6199fd6edd5e4426c6c7fee0ff64ec9421a64cd5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In addition to .qmake.cache and .qmake.super we check for the
existence of CMakeCache.txt. The top-level non-prefix build part is
prospective, but seems plausible.
Without this fix, non-prefix qmake builds build libs etc. in the wrong
locations, i.e. not in a subdirectory of qtbase.
Change-Id: Ic88efa6c772d49ef92713fe640f004c8a5c849d3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This requires mostly making moc a bit more permissive, which has the
advantage that it also simplifies the code a little bit.
The newly added test case demonstrates how to connect such a property
with a change signal.
One test case needed to be changed regarding the callback as the
publicProperty member now has a (permanent) observer and therefore
re-assigning the binding will re-evaluate it as the value might have
changed.
Change-Id: Ia7edcec432de830bdd4e07d943c5d4550c175ca4
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The previous approach didn't work for prefix builds. While a target
might be excluded from building via EXCLUDE_FROM_ALL property, when
calling make install it would still try to install the target and
thus fail.
It's not possible to modify an install() command in a post-processing
step, so we switch the semantics around.
pro2cmake will now write a
qt_exclude_tool_directories_from_default_target() call before adding
subdirectories. This will set an internal variable with a list
of the given subdirectories, which is checked by qt_add_executable.
If the current source dir matches one of the given subdirectories,
the EXCLUDE_FROM_ALL property is set both for the target and the
qt_install() command.
This should fix the failing Android prefix builds of qttools.
Amends 622894f96e
Change-Id: Ia19323a2ef72a3fb9cb752ad2d4f2742269d11c4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
list(JOIN) removes a layer of escaping, which force doubling up
on the backslashes. Instead use string(REPLACE) thus making the
escaping a bit saner.
Change-Id: Ie3daf0112dd09fbcbaf8798552949470952611c9
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On Android, check_language() reports that the languages are supported,
but enable_language fails afterwards.
On Linux it causes issues with the PCH. The PCH file might contain
a Clang pragma, even though the C++ compiler is GCC. Presumably due
to finding a Clang Objective-C compiler.
Change-Id: I1b4c54459772c089e7f6350872c87af52ad72a37
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
configurejson2cmake handles the 'static' and 'shared' features now.
There's no need to special-case it anymore.
Change-Id: I956e9f46ebe022b1da862e986ec05f41e1e804e0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Now that we have the 'shared' feature implemented we can easily port
the 'static' feature.
Change-Id: Ia9b54b68d532d73c3d62d12a86c9e8b83e7909c8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
configurejson2cmake handles the 'rpath' feature now. There's no need
to special-case it anymore.
Change-Id: I9aa9c9acdeb586de09d8a8d269909f8acb02e40a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add -Wno-error=format-overflow. This is similar to what is done in
qt_common.prf, however we don't turn the warning off completely.
For now at least.
Change-Id: I93c20064759dea43309c3a17de4d733ede9ca2cb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We do not benefit from it (don't need Alt+Enter and such). Switching
to DXGI_MWA_NO_WINDOW_CHANGES is also in line with the qtbase/5.14
patch 1430b29 that does the same for ANGLE.
Change-Id: Ie6384aeb2e97130ff439f761a7c166086f04526c
Reviewed-by: Jonas Karlsson <jonas.karlsson@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When a class has multiple QProperty members to implement functionality,
it is common to have functions in the class that react to changes. For
example to emit a compatibility signal, in case of Qt Quick to mark the
scene graph as dirty, etc. etc.
To faciliate this use-case, this patch adds an internal
QPropertyMemberChangeHandler template that allows connecting a QProperty
field to a member function callback.
At the moment that callback is still 3 * sizeof(pointer). This could in
theory be reduced to 2 by eliminating the back-pointer (prev) as the
observer lives as long as the property. That however belongs into maybe
a future patch.
In order to get a pointer back to the surrounding object that holds the
QProperty as well as provides the callback function, the property system
was changed to pass through the address of the QProperty member at
run-time, and at compile time the delta from the QProperty member to the
beginning of the surrounding class is calculated. Through subtraction we
obtain the pointer to the owning object.
Change-Id: Ia2976357053f474ff44d0d6f60527c3b8e1f613a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We don't need the test, we can just check the value of BUILD_WITH_PCH
to know whether the feature is enabled.
Regenerate configure.cmake files.
Change-Id: I5691a22af2913bc398f99825e0c41cf2daf5a587
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
All remaining pieces are gone, configuration included.
Relevant CMakeLists and configure.cmake were regenerated.
Fixes: QTBUG-76502
Change-Id: I667b5da7e3802830d236d50b5e9190c2ee9c19e2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Starting with CMake 3.18, there is PCH support for darwin multi-arch
builds, like iOS simulator_and_device builds.
Also enable PCH for Objective-C++ files when the support is there.
To enable PCH for Objective-C++, we need to do enable the OBJCXX
language as well, but conditionally, because on non-darwin platforms
the language is probably not available.
Introduce the qt_enable_cmake_languages() macro which is called
automatically by qt_build_repo_begin().
Change-Id: I0e7f44be6577ac54ce940470036626409920e272
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The name of the option may cause confusion due to the fact
that it's not _fully_ anchoring the match, only anchoring it
at the offset passed to match() -- in other words, it's a
"left" anchoring. Deprecate the old name and introduce
a new one that should explain the situation better.
[ChangeLog][QtCore][QRegularExpression] The AnchoredMatchOption
match option has been deprecated in favor of
AnchorAtOffsetMatchOption, which should better describe
that the match is only anchored at the offset.
Change-Id: Ib751e5e488f2d0309a2da6496378247dfa4648de
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
QtConcurrent::blocking*() methods are using the ExceptionStore directly,
which is not thread safe. In case if there's an exception thrown from
multiple threads there may be a race condition. Added a lock to avoid
that.
Change-Id: I5de9928f91f5f43951b9bf9c4594694dc0ca0328
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Address FIXME comment.
The class is not public, and only used in QtWidgets for the resizing of
docking widgets. The move functionality is unused, and has been
removed.
Change-Id: Id477f36cb7d449b06e124950fed6f5f182aa5721
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Most of them are hand-written.
Change-Id: Ia3d83cdc9e279420c9b4700993b428e10cf8fb22
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Some library entries in configure.json have a test entry.
An example is assimp in qtquick3d.
qmake tries to find the library via the sources section, and then tries
to compile the test found in config.tests/assimp/assimp.pro while
automagically passing it the include and link flags it found for assimp.
We didn't handle that in CMake, and now we kind of do.
configurejson2cmake will now create a corresponding
qt_config_compile_test call where it will pass a list of packages and
libraries to find and link against.
pro2cmake will in turn generate new code for the standalone
config.test project. This code will iterate over packages that need to
be found (like WrapAssimp) and then link against a list of passed-in
targets.
In this way the config.test/assimp/main.cpp file can successfully
use assimp code (due to propagated include headers).
qt_config_compile_test is augmented to take a new PACKAGES argument,
with an example as follows
PACKAGES PACKAGE Foo 6 COMPONENTS Bar
PACKAGE Baz REQUIRED
The arguments will be parsed and passed to the try_compile project,
to call find_package() on them.
We also need to pass the C/C++ standard values to the try_compile
project, as well as other try_compile specific flags, like the
toolchain, as given by qt_get_platform_try_compile_vars().
Change-Id: I4a3f76c75309c70c78e580b80114b33870b2cf79
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
As per the FIXME comment. These functions are not called by Qt, so no
reason to have them virtual.
As a drive-by, remove redundant virtual keyword from overrides.
[ChangeLog][QtGui][QValidator] QIntValidator::setRange and
QDoubleValidator::setRange are no longer declared as virtual.
Change-Id: I640646fb18ed50554e384ed67ac85b3f408ea8cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The target may not be defined which causes error:
get_target_property() called with non-existent target "qtwaylandscanner".
Change-Id: I58a9122456ccbbbb8fc9f0adce3b7ddcc985e6a4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is an artifact of pre-Qt 5 Wacom driver implementation, hasn't
been in use during the Qt 5 series, but was kept for source compatibility
with very old sources. Let's hope the usages are all gone by now.
Change-Id: I39dc36699510ea5e51cacd369470264fd8a27b37
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Installing headers is not supported for 3rd party libs (we don't run
syncqt, we don't install headers for 3rd party libs to
prefix/include).
Remove the unnecessary condition.
Change-Id: I46e9af7a7ca9de0138666b0d0faffc86238672ba
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When creating the include/QtShaderTools/QtShaderToolsDepends file
in QtPostProcess.cmake -> qt_internal_write_depends_file(),
we decide which include files to append based on link dependencies
starting with Qt::, which happens to match 3rd party targets like
Qt::BundledSpirv_Cross which doesn't expose headers in the
prefix/include dir.
Mark all bundled targets with the QT_MODULE_SKIP_DEPENDS_INCLUDE
property to exclude them from being added to Depends files.
This should fix static builds of qtquick3d which includes
<QtShaderTools/QtShaderToolsDepend> which tries to include a
non-existent <QtBundledSpirv_Cross/QtBundledSpirv_Cross>.
Change-Id: I9dcff1e2ab721a7c21fcff3fda0faf8d023d60ba
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The path where we install plugins is usually
prefix/plugins/plugin_type/plugin_name
The plugin_type should not be escaped, so it should be used verbatim
(no escaping of slashes or dashes)..
So far it seems the only weird plugin types are wayland plugins which
contain dashes, like wayland-shell-integration, and the sub-ios plugin
which has a slash (platforms/darwin).
For cmake properties we use the escaped names.
This should fix tests in wayland where the wayland plugins can't be
found.
Change-Id: I93406731b8c872a82c0f247f5b7c6bdab4875455
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Qt uses the qtNomakeTools() function to mark a directory which will
not be built as part of the default target. This is especially
important when cross-compiling (to iOS for example) because the build
process might fail.
The condition for not building these "GUI tool sub-directory projects"
is the absence of the "tools" value in qmake's QT_BUILD_PARTS
variable.
Introduce a QT_NO_MAKE_TOOLS CMake variable. If the value is true,
it's equivalent to "tools" not being present in QT_BUILD_PARTS.
Introduce qt_exclude_tool_directories_from_default_target().
It's the qmake counter part to qtNomakeTools().
Teach pro2cmake to generate it where appropriate.
Change-Id: If2e5958d91847ab139af0e452608510286e73fa0
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Like libs, tools, examples, tests. Built by default means
they are part of the default make / ninja target.
Change-Id: I304e5724fc5dbd39626e9d589a6e1e92a4dd7882
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The friendly named values should be used rather than the
all caps names.
Change-Id: I44dbe8c25d405424c5cd2c9527b6e884511ac269
Reviewed-by: Toni Saario <toni.saario@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Such a case can happen when cross-compiling. Tools currently are not
built when cross-compiling, so if the desktop tool was not built,
accessing properties on that target would fail when trying to set up
the documentation building.
Change-Id: I2ffcbb9623df3e4daacdf4be3f48c4b2dd13851b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The tst_QSplitter::replaceWidget() is testing that if you
replace a longer QLabel with a shorter one in a horizontal
splitter layout, then we *only* get a resize for the new,
shorter label (expanding it horizontally to match the
replaced widget, as documented).
But the test accidentally triggered the QTextDocument backend
for the QLabel by including HTML tags in its text. Due to
QTBUG-82954, it is possible that the QTextDocument height
includes the leading of the font in the last line, so if
the default font has a leading, the new label will be higher
than the QSplitter, and the splitter will expand its height,
causing resizes for the other labels as well.
Since this is not the case we are testing here, and it is
currently blocking the fix for QTBUG-80554, we simply make
the new label use the same plain text backend as the others.
Task-number: QTBUG-82954
Change-Id: I6bfa1f3648b0fc9758c57ab2fa95be2451995df3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Translate --ccache and --sanitize=foo into corresponding cmake
variables.
Change-Id: If6e20a715ace7e55e498e3398c592295a4f264c3
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QHash::erase() in the new QHash will invalidate
all iterators pointing into the hash.
Change-Id: Ia54e8485a947cd7274f832c7c8c624d0aaded4ba
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Changed this to not use capturedTexts(), as it
is slower than required, and behaves slightly
differently than in QRegExp (the returned list
might be shorter than the amount of captures if the
last capture didn't match).
Change-Id: I3f90128af62d784a3d1beb993ab215e0c7d6b826
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
