These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The subtests are intended to be executed by tst_selftests and therefore
don't need to have "CONFIG += testcase", which causes 'make check" to
treat them as stand-alone tests.
Change-Id: I1b47e0186be99c591bb1e03bbec6386518f8a449
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QT_DEPRECATED is defined by default by the logic in qglobal.h, but
QT_DEPRECATED_SINCE is evaluated before that definition, making
QT_DEPRECATED_SINCE evaluate to 0, disabling all deprecated code (even
though it shouldn't be disabled).
Fix this by moving the QT_DEPRECATED_SINCE evaluation to after the
evaluation of QT_NO_DEPRECATED and/or definition of QT_DEPRECATED, to
ensure that QT_DEPRECATED_SINCE works as expected.
Change-Id: I57d9f6a3e1859b0057fd4f37bcf2d2cc3dfba230
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is needed by QtScript, so we need to keep it for now.
Change-Id: Iee6bd7daf7e86a09242523f5aca72ede413a6981
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Copy and paste the ARM code into the MIPS dir, there is no lithium
support in MIPS right now.
Change-Id: I21491d36da2a4ac4cb6898c47b0e5bd37a733b41
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
2008d2d40e was not rebased properly and
should have used the V8_TARGET_ARCH to add the MIPS code to the build.
Change-Id: Idf0c183fca63da0fa9f9aa8d091a764b88c888f5
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
Make the test object names correspond to the test program names, so that
it is easier to see which test produced each block of test output.
Change-Id: Ib19a955938b549f27cdcaac83bfa9150285b396d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QApplication::setGraphicsSystem() is a no-op, and even if it wasn't it
would be unwise to force a graphics system that isn't guaranteed to be
included in the Qt build, without including any logic to skip the test
if setting the graphics system failed.
Change-Id: Id9a0a87586872088625de7840b5032d0c3cc48a1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test uses qt.conf to enforce a predictable tests install location.
This was not working in the shadow build case, as qt.conf was only
present in the source tree; embed it as a resource at :/qt/etc/qt.conf
so it works in the shadow build case too.
Change-Id: Iec708d9686c29a1fc5ff0020dc11a93a593d20c5
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
It's not used anymore since we have switch to HarfBuzz on Mac.
Change-Id: I68252fbe3021f54dacac5a901184c3f3e541a6b7
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
From where it is forward declared to where it is fully defined.
Change-Id: Ie2240ffef6d1edbbbd5b193f9528ef94ef412d82
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
These were used for foreground/background color.
Since we have proper functions for these two now,
the hack with invoke_method is no longer needed.
Change-Id: I66eb645124caa838adb1ceb41383a2724a45f553
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
As discussed on qt5-feedback / development lists.
Change-Id: If1733369d12daa29054776ec2cbd78e63679768e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
In tst_qsql, there are function calls to QApplication(argc, 0, false), where
argc is zero. According to the documentation, argc must be greater than
zero and argv must contain at least one valid character string. The
misuse of this API has no problem on any platform other than Mac OS. This
commit has fixed the crash by passing valid dummy parameters.
Task-number: QTBUG-22811
Change-Id: I42b26d66f0becb7a942896e6ddcaea52ff720a48
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
After commit 79f675a1e0, the connect and
disconnect callback API effectively becomes useless. Now that these
callbacks cannot/do not, it makes little sense to keep the backdoors
added for Qt Jambi support.
Remove them for now. Should the Qt Jambi team want/need to port to Qt 5,
we can re-add them, possibly designing a better API for doing so as
well.
Change-Id: I6209a1d647d683c979d5294b632b8c12c0f9f91c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QtQuick and related APIs (QQuickItem, SceneGraph, et al), which
used to live in the QtDeclarative module, have moved to a new
module, QtQuick.
Existing projects that use QtQuick-specific APIs should add "quick"
to their project's QT variable, and update their include statements.
E.g.,
QT += declarative
should be changed to
QT += declarative quick
and
#include <QtDeclarative/qquickitem.h>
should be changed to
#include <QtQuick/qquickitem.h>
and similarly for the other QtQuick classes.
In order to give existing projects a chance to migrate smoothly, we
should issue a warning and automatically add the QtQuick module if
only the QtDeclarative module was specified. (If a project doesn't
use any QtQuick APIs, the warning can be ignored -- but there is no
way to disable it.)
This change, along with the compatibility headers in QtDeclarative,
make it possible to build existing projects without any modifications
on the project's side.
This change will be removed at a later time; when that happens,
existing projects that did not port to the QtQuick module will no
longer build.
Change-Id: I56abcadc1e5c74490527fc03646310d801bfc084
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QSqlRelationalTableModel doesn't follow relations on the first column
of a table. The DisplayRole and the EditRole for indexes on column 0
are always the same. The bug is found in QSqlRelationalTableModel::data.
Task-number: QTBUG-20038
Change-Id: Ie1e98b5f46ffc171113f2d51b9b19ff5febb1c3c
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
As it was in Qt4 and discussed on the cmake list.
Change-Id: Ide77c2525a261a5d658d7cb661010a67d3386341
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This is a source incompatible change. There is concern that the
convenience of the implicit cast and assignment operators can lead to
misuse. Several commits have already been done that remove excess use
of the implicit cast, which is a *volatile* read every time it's used.
Users of the QAtomic* API should have to think about when they are
loading the value, and if they do or don't need the acquire memory
barrier on load. The code that people would write using this API is
meant to be multi-threaded, concurrent, and correct. The API should not
allow them to inadvertently, possibly unknowingly, shoot themselves
in the foot.
SC-break-rubber-stamped-by: Lars Knoll
Change-Id: I88fbc26d9db7b5ec80a58ad6271ffa13bbfd191f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implement AccessIbleChildrenAttribute and
accessiblityHitTest.
Change-Id: Ia9fa80e3015edbb969d173a2587cb53b9c69852e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Qualify all references to QAccessible members with QAccessible::
Change-Id: Ia78d8482bbab3d77c9e258a52bc74f8e7c0c7e10
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Update the documentation to make it clear that regular test applications
should not call QTest::qExec() more than once. Also minor rewording of
description of return value.
Change-Id: I45bdf520ed10fd3c9232847a0ec0bc2b32d4caf3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Remove extra spaces, remove virtual keywords.
This code was simply inconsistent with the rest.
Change-Id: Iec8e9542dd4c458ddd535cb1766c90c18051686a
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
Rename the new interface after the old one has been removed.
This interface is very close to the IAccessible2 Table2 interface.
Change-Id: I8659232189fe0e8307151c743727de425c30ac9a
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
Introduce a new platform called 'directfbegl' that allows platform
integration with EGL. Change the QDirectFbIntegration to make it more
easy to hook up in the creation process, introduce an EGL integration
with custom screen, window and EGL Platform Context.
Vendors might need to add custom code to initialize EGL to be used with
DirectFB, this can be done in QDirectFbScreenEGL::platformInit.
Change-Id: I7bee277ede27c72437cd7c5977fa6ed85e65f538
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
We will need to have logging outside of the blitter code, make the
macro available to everyone.
Change-Id: I811ecb98a870a818630276b5daa788790db71ccd
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
The test fails if the repository is checked out with
Windows line endings. Try to work around.
Basically, ensure that common developers can conveniently
run the test.
Change-Id: I91f31b830ba7ba305deea782737d4e07a89420eb
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
This is a left over from the old way of
handling accessibility actions.
Change-Id: I1146f3dfec2b842f83a3cdd264e4ebb1013cc517
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
Add mips to the list in configure and the v8.pri, build the existing
MIPS files. The result has not been verified to work.
Change-Id: I0f4fd29cd9752d32b6d87e0df0e888822f40ac0a
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
This is sent when the object's name changes.
tst_moc must be updated since the method count of QObject has changed.
The test assumed that there were 4 invokable methods in QObject. The
new signal is the 5th, which breaks the test's assumptions. Fix this
as well.
tst_QObject must be updated since the
QObjectPrivate::isSignalConnected() method only supports the first 64
signals. With the addition of this new signal, sig61() in the test
becomes the 65th signal, and will always appear connected now.
Task-number: QTBUG-13999 (related)
Change-Id: Ie87893c71a231fafa7ccf2f16102238a7be8327a
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Make sure the name of the project corresponds to the project name
passed to try_compile so that the .sln files are created.
Change-Id: Ifee24ac4ab6a16a538bdf7fb32ea252eb1ba436a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
When listening on QHostAddress::Any, serverAddress() should return
QHostAddress::Any too, assuming that setting the socket options
was successful.
Task-number: QTBUG-22899
Change-Id: I50a9ff1b4ad0c1c1905e2952c595d7068df2627d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
