Attempting to use an invalid QStringConverter would so far have resulted
in a crash, as we would dereference the null iface pointer.
Fix this by inserting adequate checks, and ensure that hasError returns
true if we attempt to en/decode with an invalid converter.
Pick-to: 6.2 6.3
Change-Id: Icf74bb88cd8c95685481cc0bd512da99b62f33e6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The issue is that when someone is trying to use the following code:
QKeySequence keySequence(Qt::Key_Shift);
qDebug() << keySequence.toString();
This will print seemingly gibberish output. It is unicode in practice. For
Qt::Key_Shift, this would be: "�_@\uDC20"
The reason why this is happening is because we have platform-specific ways to
handle this due to Mac glyphs which are not available on Linux or Windows. This
works fine on Mac.
But for the Linux and Windows codepaths, there is not really any mapping like
for other keys. It seems that modifiers were left out.
The solution is to simply amend the list of mapping from these modifier key
codes to raw strings for Linux and Windows like it is done for other key codes.
So, now, modifiers will also be included in the list.
So, the expected output will be generated for the above code, as: "Shift".
[ChangeLog][QtGui][QKeySequence] Added missing modifier names
Fixes: QTBUG-69715
Fixes: QTBUG-40030
Change-Id: I460d54bc8e593b350ff95894f23c5b4a7c819a44
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We should prefer to test this unless we know it won't work, but this is
very hardware and implementation-dependent anyway. So I declare that
we'll only guarantee FP exception cleanliness on a best-effort basis for
a few platforms.
The notable difference in this commit is the removal of QNX. I don't
know why it began producing an FP exception with one of my changes, but
since the toolchain isn't public, I can't debug and will not devote any
time to figuring it out. If users of QNX require this, then someone with
interest in that OS will need to spend time after my changes integrate.
Change-Id: Ibcde9b9795ad42ac9978fffd16f1cb9c03a0ff66
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
There are no commented out test cases remaining, so the normal
test vectors are identical to full test vectors.
Fixes: QTBUG-97537
Pick-to: 6.3
Change-Id: I987f178f192e1c8e2d998d36499fdce84f237e77
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
UAX #14, revision 45 (Unicode 13) has changed rule LB30 to only
trigger if the open parentheses is non-wide:
(AL | HL | NU) × [OP-[\p{ea=F}\p{ea=W}\p{ea=H}]]
This fixes the remaining 24 line break tests.
Task-number: QTBUG-97537
Pick-to: 6.3
Change-Id: I9870588c04bf0f6ae0a98289739bef8490f67f69
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Implement part of LB30b introduced by UAX #14, revision 47
(Unicode 14.0.0):
[\p{Extended_Pictographic}&\p{Cn}] × EM
This fixes one line breaking test.
Task-number: QTBUG-97537
Pick-to: 6.3
Change-Id: I3fd2372a057b7391d8846e9c146f69a54686ea61
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Word breaking rule WB3d should not be affected by WB4.
This fixes the remaining word break test.
Task-number: QTBUG-97537
Pick-to: 6.2 6.3
Change-Id: I99aee831d7c54fafcd2a9d526a3e078b12c5bfad
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Disable break between sequences of WSegSpace characters (rule WB3d,
introduced in UAX #29, version 33, Unicode 11.0.0). Also disable breaks
between WSegSpace and (Extend | Format | ZWJ) due to rule WB4.
Adjust "words4" test to take the above changes into account (space
character belongs to WSegSpace).
Mention the full class name in a comment inside the word break table.
This fixes 34 word break tests.
Task-number: QTBUG-97537
Pick-to: 6.2 6.3
Change-Id: I7dfe8367e45c86913bb7d7fe2adb053711978487
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This rule was simplified in version UTS #14 version 45 (Unicode 13.0.0)
to read:
× IN
Re-enabled 28 fixed line break tests.
Task-number: QTBUG-97537
Pick-to: 6.2 6.3
Change-Id: I1c5565a8c1633428c22379917215d4e424ff0055
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Adjust implementation of rule LB8a of UAX #14. The rule was changed
in version 41 (corresponding to Unicode 11.0.0):
ZWJ × (ID | EB | EM) ⇒ ZWJ ×
Fixing this rule fixes 9 line break tests. Those are re-enabled.
Task-number: QTBUG-97537
Pick-to: 6.2 6.3
Change-Id: I1570719590a46ae28c98ed7d5053e72b12915db7
Reviewed-by: Øystein Heskestad <oystein.heskestad@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Always invert scroll deltas. This is what the code did
before, expect for on non-Safari macOS. There is no
need any "smart" code here: correct deltas are provided
by the native API regardless of macOS scroll direction
setting.
Reading webkitDirectionInvertedFromDevice is still useful
for certain use cases, such as 3D scene zooming or spinbox
value change, where upwards motion on the trackpad should
always correspond to "increment" regardless of scroll direction.
Propagate this to Qt using one of the handleWheelEvent()
overloads
Finally, we were sending pixel deltas as angle deltas;
fix by sending pixel deltas as well, but keep existing
angle delta behavior for compatibility.
Change-Id: I7a7104c30da057fefc0377816e551a9e7e2fa0e7
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Reviewed-by: David Skoland <david.skoland@qt.io>
Simplifies the test a little.
Pick-to: 6.3
Change-Id: I77c8221eb2824c369feffffd16f0a7fc44215aaf
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The utf8.txt file was only 21 bytes and contained exactly two non-ASCII
characters. It wasn't very good.
This commit brings back the UTF-8 test rows that existed before commit
18ec53156e deleted tst_Utf8. There's a lot
of overlap with some of the other rows in this test, though.
Pick-to: 6.2 6.3
Change-Id: I77c8221eb2824c369feffffd16f094619b69faef
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The QLocal8Bit implementation assumes that there's at most one
continuation byte -- that is, that all codecs are either Single or
Double Byte Character Sets (SBCS or DBCS). It appears to be the case for
all Windows default codepages, except for CP_UTF8, which is an opt-in
anyway.
Instead of fixing our codec, let's just use the optimized UTF-8
implementation.
[ChangeLog][Windows] Fixed support for using Qt applications with UTF-8
as the system codepage or by enabling that in the application's
manifest.
Discussed-on: https://lists.qt-project.org/pipermail/interest/2022-May/038241.html
Pick-to: 6.2 6.3
Change-Id: I77c8221eb2824c369feffffd16f0912550a98049
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The documentation says we can change window parent to avoid the widget
deleting the window. That didn't work as the widget didn't get the
child-removed event as it wasn't the parent.
This patch instead uses an event filter on the set parent.
Pick-to: 6.3 6.2
Change-Id: I1f61d1832fcf3257722f305beeefd8f1abf1f656
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Amends 2a893db480, which changed the
#ifdef'ery but didn't actually enable the building of the test on
Android.
Task-number: QTBUG-87414
Pick-to: 6.3 6.2
Change-Id: Id944dd3023da40ecbf4b8a324784409a63f94aec
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Add a template function that allows us to get the method signature
string from a free function, which are used as native callbacks methods
from Java.
Provide a macro that defines a signature object, and a JNINativeMethod
object based on it, in an internal namespace so that we don't pollute
the namespace with generated names.
Add another macro to get the generated JNINativeMethod object based on
the free function name.
Lastly, add overloads to QJniEnvironment::registerNativeMethods that
take a std::initializer_list of JNINativeMethods.
We can now declare a free function to be a JNI native method:
static bool callbackFromJava(JNIEnv *e, jobject /*thiz*/, jstring p1)
{
// ...
}
Q_JNI_DECLARE_NATIVE_METHOD(callbackFromJava);
and register it with the JNI environment like this:
QJniEnvironment jni;
jni.registerNativeMethods(clazz, {
Q_JNI_NATIVE_METHOD(callbackFromJava)
});
removing a significant amount of boiler plate code.
Change-Id: Ie4007b24125879fed3dae1f4d232b4aa95999b44
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
When replacing a widget in a hidden splitter, then we only need to keep
the new widget hidden if the previous widget was hidden.
If the new widget is not explicitly hidden, and the splitter is already
visible, then we need to explicitly show the new widget.
Augment test case; the existing test cases already cover swapping out a
collapsed or hidden widget.
Fixes: QTBUG-102134
Pick-to: 6.3 6.2
Change-Id: I9b60711a5c1cab79777ce4183783114a16ac3394
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QMetaType can register a converter from a smart pointer class to
QObject *. The code tries to do so even if the smart pointer is
actually holding a pointer to a _const_ QObject
(e.g. shared_ptr<const QObject>), causing a compile error:
../src/qt5/qtbase/build/include/QtCore/../../../src/corelib/kernel/qmetatype.h:1208:32: error: invalid conversion from ‘const QObject*’ to ‘QObject*’ [-fpermissive]
1208 | return p.operator->();
| ~~~~~~~~~~~~^~
| |
| const QObject*
Disable the conversion if indeed the source is const qualified.
Change-Id: I9e9bc5992f74131e5cfd6ece9b83d4f26d370e92
Fixes: QTBUG-103741
Pick-to: 6.2 6.3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
QtConcurrent map- and filter-reduce functions take an initial value,
which can be of any type that is convertable to the result type. The
side-effect of this is that the enum values passed as ReduceOptions can
be treated as an initial value (if they are convertable to the result
type) which will result into a wrong overload call. To avoid this, added
additional check to make sure that the initial value type doesn't match
with ReduceOption enum.
Note that this required including the qtconcurrentreducekernel.h header
in qtconcurrentfunctionwrappers.h (which contains compiler checks for
QtConcurrent) for accessing ReduceOption enum, so I had to get rid of
qtconcurrentfunctionwrappers.h include from qtconcurrentreducekernel.h
to avoid circular header includes. This, in turn, required moving the
QtPrivate::SequenceHolder helper type to qtconcurrentreducekernel.h,
which didn't belong to qtconcurrentfunctionwrappers.h anyway.
Pick-to: 6.3 6.2
Fixes: QTBUG-102999
Change-Id: Ieaa8ef2e4bd82ce2ada2e0af9a47b87b51d59e87
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This reverts commit 1e938c348b
and bb2f4d08d9.
bb2f4d08d9 causes the crash, but 1e938c348b amends it, so
this reverts both. When the cause of the crash has been determined
and mitigated, the patches can be recreated.
Fixes: QTBUG-103719
Change-Id: Ifc36b3771a96f6c85387a5306a0402d4c508d006
Reviewed-by: David Faure <david.faure@kdab.com>
When XCB_INPUT_TOUCH_BEGIN closes a popup, we then receive
XCB_INPUT_TOUCH_END, and cannot find a target window (because it's
destroyed). If we don't deliver it, we need to at least clear the
stored point from QPointingDevicePrivate::activePoints. Then when
we deliver the next touch press, m_fakeMouseSourcePointId also
needs to be reset.
It's now even more paramount that autotests (and real-world
touchscreens) must never omit any active touchpoint from a touch event.
If a point doesn't move, it must be included in the QTouchEvent, with
Stationary state. If not, QGuiApp::processTouchEvent() could generate
multiple TouchBegin events in a row, which gets other bits of logic
confused, here and there.
Fixes: QTBUG-94557
Fixes: QTBUG-98519
Fixes: QTBUG-102751
Fixes: QTBUG-103706
Pick-to: 6.2 6.3 5.15
Change-Id: Ia95e410a2bb8bc7784aa5d296fac2b89e53a9f55
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This caused unnecessary empty <pre> blocks when converting markdown to
HTML, made code blocks too large using QSyntaxHighlighter to highlight
the whole block, and caused assymmetry when rewriting markdown.
Pick-to: 6.3
Fixes: QTBUG-101031
Change-Id: I08016577ccb92edb4afae31d7df3259cb011d5c8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The HTML parser calls QTextBlockFormat::setNonBreakableLines(true) when
it sees a <pre> tag; so for symmetry, the markdown reader now does the
same when it sees a fenced code block, and the markdown writer honors
the nonBreakableLines property by writing a fenced code block. This
preserves the meaning better when reading HTML and writing markdown or
vice-versa, without modifying HTML reading or writing code.
Added a test tst_QTextMarkdownImporter::fencedCodeBlocks() which
unfortunately also highlights a known bug in the markdown reader: each
fenced code block ends with an extra empty block. That can be fixed
separately.
tst_QTextMarkdownWriter::fromHtml(preformats with embedded backticks)
that we re-enabled in 1abaf9d5d6 was not a
very useful test: ``` with a space and some words but no newline is not
a fence: it's just like a `monospace` span. We have had trouble with
those in CI because of missing monospace fonts, or inconsistency when
a supposedly mono font's QFontInfo::fixedPitch() returns false.
So just test proper <pre>/fence conversion for now.
Pick-to: 6.3
Fixes: QTBUG-100515
Fixes: QTBUG-100981
Task-number: QTBUG-101031
Change-Id: I88f0ede0810d8a9480b30eb0cd780e1af67cc5f2
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This allows to set up everything first - without paying for layouting
at every step - and only then trigger layouting.
Same performance behavior as setTextWidth(0), but this is a more
explicit/readable API.
Change-Id: I044dbd8b1301b1c97a92f9a29ccde2baf27a7665
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The unsigned return value was very un-Qt-ish, and, indeed,
tst_QCoreApplication just stored the result in ints.
Port to qsizetype, being the type of the expression that the function
calculates.
Task-number: QTBUG-103532
Change-Id: I95a81a686439b0686faad7a430adeaab66dc9e8d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The only in-tree user outside QtCore is tst_QCoreApplication, guard
the (single) test function there with QT_BUILD_INTERNAL.
Change-Id: Ibc87ba76f2135cd8283acd75318f80a95e4b5c45
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... in favor of including qabstracteventdispatcher_p.h, where needed.
Keeps the code DRY.
Change-Id: I5bee2e653cb29ffac2601ff03c952a4b3adbdb9c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On QNX in CI we see
system fonts: fixed: monospace 9; general: Sans Serif 9
and "monospace" isn't really a fixed pitch font.
On B2Qt arm7 in CI we see
system fonts: fixed: monospace 9; general Sans Serif 9
and Sans Serif is actually fixed pitch.
So these tests can go wrong both ways; we need to skip them whenever
the fonts would lead QTextMarkdownWriter astray.
Pick-to: 6.3 6.2
Task-number: QTBUG-89819
Task-number: QTBUG-99676
Task-number: QTBUG-100515
Task-number: QTBUG-103484
Change-Id: I7b9adca967eaf9b8d33d1e03ef2627f70f375196
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Draw tool button menu indicator relative to frame, not content, so that
padding added in the stylesheet creates room between text and indicator.
Also, prevent another double-arrow by ignoring menu indicator rendering
when a menu button subcontrol is used, as the two are mutually
exclusive. This amends 1c338e6d07.
Add problematic case to stylesheet baseline test.
Fixes: QTBUG-102866
Pick-to: 6.3 6.2
Change-Id: I5d79e65b33a2e41ac07c8efe0c15697c5be65201
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This patch enables usage of QAbstractItemModelTester on
QFileSystemModel. QAbstractItemModelTester called fetchMore()
on all items. QFileSystemModel represents the whole file system.
This led to very long test runs. To avoid this, this patch
introduces a new feature in QAbstractItemModelTester, namely
to disable calling of fetchMore().
Change-Id: Ie5d2e22fa4c143be7c080d9f79632cd2cbe07aac
Reviewed-by: David Faure <david.faure@kdab.com>
Invalid inserts of items are tested. However, on an invalid insert
of QTreeWidgetItem into QTreeWidget, the QTreeWidget does not take
ownership of the to-be-inserted items. These items were leaked in
the past.
This patch introduces a scope-guard, so the items are not leaked.
Change-Id: Ib53ac02605c3a3c0bd1ae69bbd0876f860d08093
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Revert the change to uic of 05fc3aef53.
Task-number: QTBUG-67283
Change-Id: Icfd83bb6d80b91d4e58f1be460f6772ba49a6921
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Several classes in QWidget use QDataStream internally in order
to save and restore state. These QDataStream usages were not
versioned, meaning that if Qt changes the serialization for some
datatype, then the data saved between different Qt versions becomes
incompatible. Note that the save/restore API in question just produce
opaque blobs as QByteArrays -- the user has no control over the
QDataStream objects and thus versions.
Fix by version the usages.
In QHeaderView this has caused a regression because QBitArray *did*
change version between Qt 5 and 6. In general, using QDataStream without
explicit versioning is a mistake, so deploy the same fix elsewhere as
well.
Fixes: QTBUG-99487
Pick-to: 5.15 6.2 6.3
Change-Id: I82bb5c266f4e5dedc0887cbef855dccab1015e29
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: <doctor.whom@gmail.com>
In a QGraphicsTextItem without a width yet, there's no need to do any
layouting. The use case is obviously items with an app-defined size,
not the default where text items adapt to their contents.
Results:
0.065 msecs to create a QGraphicsTextItem with some text (layouted)
0.036 msecs to set everything up in a QGraphicsTextItem with 0 width
QTextEdit was abusing the width 0 to mean "no wrap, width comes from
contents", but since the value -1 means that already in QTextDocument,
QTextEdit now uses a width of -1 for that meaning.
Change-Id: I67ad59c305e5dd34830886e4e6c56dde03c93668
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Add the Q_OS_WIN32 guard for the include of QWinEventNotifier.
Change-Id: I7824b2ee236a370c83fd85a2f594a39cf36b36e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This broke compilation of qDBusRegisterMetaType<std::vector<MyStruct>>
because std::vector<T> is in fact std::vector<T, std::allocator<T>>.
Pick-to: 6.2
Change-Id: I6a13f5f0476a3faa3a43da54d90d652b4bdd8186
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This allows us to specialize JNI type signature templates for e.g. the
context object, which in Java signatures is "android/content/Context".
Introduce a Q_DECLARE_JNI_TYPE macro that takes care of the plumbing.
The types declared this way live in the QtJniTypes namespace, and
transparently convert from and to jobject. Since jobject is a typedef
to _jobject* we cannot create a subclass. Use a "Object" superclass
that we can provide a QJniObject constructor for so that we don't
require the QJniObject declaration to be able to use the macro.
The APIs in the QNativeInterface namespace doesn't provide source or
binary compatibility guarantees, so we can change the return types.
Change-Id: I4cf9fa734ec9a5550b6fddeb14ef0ffd72663f29
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Since we know at compile time whether the return type is an object type,
we can use 'if constexpr' and auto return type in the call(Static)Method
and get(Static)Field functions to call the object-type methods.
This makes the object-methods conceptually obsolete, but don't declare
them as deprecated as long as they are still used in submodules to avoid
warning floods and build failures in -Werror configurations.
Change-Id: Ic3019ed990a9252eefcb02cdb355f8a6ed6bc2ff
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Turn off native indicators if we have custom rules, and if we drew
natively, don't draw custom indicators. This amends
ea0e0a8652 which turned off custom drawing
too aggressively, removing custom indicators also if no custom drop
down arrow (which is only relevant for drop down menu buttons) was set.
When then drawing the custom indicator, respect positioning rules in the
style sheet.
Extend baseline test.
Fixes: QTBUG-102866
Pick-to: 6.3 6.2
Change-Id: I5ca353f42e704ec3f6e57677c35118a9cb358b0b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Also add the beginnings of an autotest for QTextCursor::insertHtml(),
for comparison purposes.
We can see that the block to be inserted is merged with an existing
block by default rather than being inserted as a new one, with both HTML and
Markdown insertions. So now we test for leading and trailing newlines
in the markdown to be inserted, to determine whether we need a new block
into which to insert, and to "hit enter" at the end of the insertion.
QSKIP the toMarkdown() comparisons if GeneralFont is mono. This happens
on Boot2Qt systems in CI.
Task-number: QTBUG-76105
Task-number: QTBUG-94462
Task-number: QTBUG-100515
Task-number: QTBUG-103484
Change-Id: I51a05c6a7cd0be4f2817f4a922f45fa663982293
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This allows color space conversions that produces values outside the
0.0->1.0 range, which is one of the intended functions of the floating
point image formats.
Change-Id: I63b37b0f6934d4382edafb4709486c785a637c67
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
A class that reimplements a virtual function isn't using the override
keyword, which generates a warning during compilation.
Pick-to: 6.3
Change-Id: Ic39ea24993e031f95ac9e61c3285d3be05fe6c34
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This allows the compiler to deduce the template arguments based on the
provided method parameters, which we can then pass to the methodSignature
and fieldSignature helpers to generate the signature string completely at
compile time.
Since we can't partially specialize template member functions, replace
the specializations for void methods with compile-time-if branches in
the general templates.
This variadic template now prevents implicit conversion from the
LiteralStorage types to const char* signatures, so catch the case where
such a type ends up in the parameter list.
Due to overload resolution rules for constructors, we need to explicitly
disable the constructor if any of the arguments is a string literal type,
as we have to keep the old C-style variadic function working for such
calls.
Add variations that use the variadic templates to the unit tests.
Change-Id: I8734664b38bae932369462330a9a03302254c33c
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
