Create CMake config files which can be used from the very same CMake
project. These CMake config files simply do not create any targets,
controlled via the QT_NO_CREATE_TARGETS.
This patch also allows to build qtbase.git:examples as a standalone
project, against an already-built Qt.
Ran this:
ag -s "QT " examples -l -0 | xargs -0 -n 1 .../util/cmake/pro2cmake.py --is-example
Task-number: QTBUG-74713
Change-Id: I44cce5a4048618b30f890c5b789592c227a8b47d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
ASAN reports a leak here, so let's delete the style after the widgets
using them have been destroyed.
Change-Id: I0e8603fc5d2d0c13deca35a1c0020646c65eaf49
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QLineF::angle(const QLineF&) was deprecated during Qt4 times but not
decorated with QT_DEPRECATED_X. Add this so it can be removed with Qt6
Change-Id: I8950b646cc5fa8206e47bdd16647d17d615f6c6a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The use of a unique_ptr member requires that the destructor be
out-of-line, since the payload is only forward-declared in the header
file. This is good hygiene, so do it for CompositionWidget, too.
Add 'explicit' and missing = nullptr to both constructors as a
drive-by.
Change-Id: Ied1c89864f90d3f2c13fb4e9a8bbbe2e6fd6f1d7
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The following enumerations were obsolete for a log time but not marked
as deprecated:
- WA_NoBackground
- WA_MacNoClickThrough
- WA_MacBrushedMetal
- WA_MacMetalStyle
- WA_MSWindowsUseDirect3D
- WA_MacFrameworkScaled
- AA_MSWindowsUseDirect3DByDefault
- AA_X11InitThreads
- ImMicroFocus
mark them as deprecated and remove the usage inside QtBase so they can
be removed with Qt6
Change-Id: Ia087a7e1d0ff1945286895be6425a6cceaa483fb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Users should use range constructors instead to do the conversion.
Keep conversion methods between QList and QVector as these will turn
into a no-op in Qt 6, whereas forcing people to use range constructors
would lead to deep copies of the data.
Change-Id: Id9fc9e4d007044e019826da523e8418857c91283
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Replace deprecated functions to be able to compile examples with
QT_DISABLE_DEPRECATED_BEFORE=0x050d00
Change-Id: If6b8de31f526320d6a0e2a20bb5f8e26c77f2353
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QPixmapCache::find(QString) and QPixmapCache::find(QString, QPixmap&)
are deprecated since Qt4 times.
Explicit mark them as deprecated so they can be removed with Qt6.
Change-Id: Iaf185f69afe02203559a1c812fbb4a95c9049a1d
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Cleanup the Widgets examples - replace foreach with range-based for loop
in mainwindows and painting subdirectories
Change-Id: I3c1556dffd22e29dd0a5ba960e699291c496278a
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Martin Smith <martin.smith@qt.io>
Cleanup the Widget examples - use the new signal/slot syntax where
possible - painting and richtext subdirectory
Change-Id: If0e365ab1cabf9184076595494cfca151406fddf
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Several of the examples were not even working besides using deprecated
classes.
Change-Id: I352e0629d490593edcc5868d2ec5a8ff222eaeab
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Clicking in the main renderer window passes a new position to the lens,
disregarding the "What's This" (documentation) overlay window.
This change checks if the documentation window is open on click, and if
it is, closes the documentation window and returns without further
handling of the mouse event.
Fixes: QTBUG-7205
Change-Id: I821245ec6c78be00d80af461baf8e4d59e0f351f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In the gradients example, allow the user to select and show
QGradient's named presets.
Change-Id: I40bc6cbe3a0316ce49d67d63511881b6f6112574
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QDesktopWidget::availableGeometry()/screenGeometry() was deprecated in
5.11 and replaced with QScreen::availableGeometry()/screenGeometry()
Change-Id: I912a133971c41196f8f49754c28ce92711ff42bb
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Qt::SvgMiterJoin is more important than the name suggests: It is used
not only by SVG but also by PDF. It differs from Qt::MiterJoin in the
miter limit behavior.
Task-number: QTBUG-52640
Change-Id: I8ad04b1231958628caab18a233d54d42ea6449e7
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Compiling the default examples should be possible without compile errors.
Task-number: QTBUG-53141
Change-Id: I73d8787241291ae6230861a89b38e91d900fede0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
QFontMetrics(F)::width() has been deprecated and is replaced by
horizontalAdvance(). This updates all usage of it in tests and
documentation.
It is worth noting that many or most of the usages of
QFontMetrics::width() probably intended to use boundingRect().width(),
but since it currently works, I have not looked into that, just
replaced the function name mechanically.
Change-Id: Iec382e5bad0b50f37a6cfff841bfb46ed4d4555f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Changes internal data-size and pointer calculations
to qssize_t.
Adds new sizeInBytes() accessor to read byte size, and
marks the old one deprecated.
Task-number: QTBUG-50912
Change-Id: Idf0c2010542b0ec1c9abef8afd02d6db07f43e6d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use M_PI (and friends), where possible, in favor of hand-coded
approximations of various (in)accuracies. Where that's not available
(e.g. fragment shaders), use the same value that qmath.h uses for
M_PI, for consistency. Replaced math.h with qmath.h in places that
defined a fall-back in case math.h omits it (it's not in the C++
standard, although M_PI is in POSIX); or removed this entirely where
it wasn't used.
Reworked some code to reduce the amount of arithmetic needed, in the
process; e.g. pulling common factors out of loops. Revised an
example's doc to not waste time talking about using a six-sig-fig
value for pi (which we no longer do) - it really wasn't relevant, or
anything to be proud of; nor did the doc mention its later use.
Task-number: QTBUG-58083
Change-Id: I5a31e3a2b6a823b97a43209bed61a37b9aa6c05f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Update the arthur code sample to use the new QRegularExpression class
in place of the deprecated QRegExp.
Change-Id: Ic7efd4466b4c0fa50170b80ebb22fcb3624399ce
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
Conflicts:
qmake/library/qmakeevaluator.cpp
One side changed the iterator to use ranged-for, the other changed its
body; they only conflicted because the latter had to add braces around
the body, intruding on the for-line. Trivial resolution.
Change-Id: Ib487bc3bd6e3c5225db15f94b9a8f6caaa33456b
The (example) code used a real to hold 360 / 7, which is of course 51,
discarding the 3/7 that was most likely meant to be kept. Noticed by
Coverity (CID 22364). Use 360.0 instead of 360 to get more accurate
results.
Change-Id: Ifdfbb932589d8ea728710e8b656af651c9f8a7d2
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Move those to the equivalent {to,set,from}SecsSinceEpoch(), except for
the cases that did QDateTime::currentDateTime{,Utc}().toTime_t. Those
are best implemented with QDateTime::currentSecsSinceEpoch().
Change-Id: Ib57b52598e2f452985e9fffd145a366c92cfda20
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Examples should demonstrate best practice, and we can use the keyword
directly nowadays.
Change-Id: I1f122e5caceca17290757ffbaf3d660e7daa9ae4
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Remove Windows CE-specific files, #ifdef sections for Q_OS_WINCE and wince
.pro file clauses in library, examples and tests.
Task-number: QTBUG-51673
Change-Id: I102745aaca9d9737f2108fe7618111743d5ae980
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
