This allows anticipating and reusing internal allocations of
QPainterPathElements instead of using the common `m_myPath = QPainterPath{}` pattern.
[ChangeLog][QtGui][QPainterPath] Added clear(), reserve(), capacity().
clear() removes allocated QPainterPath elements but preserves allocated memory, which can be
useful for application with complex paths that are often recreated. reserve() and capacity()
follow QVector semantics.
Change-Id: I763461e2a421feda9053d3eb512af2fcf07ade2b
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This conversion is critical for ARGB32 painting, and no compiler
optimized the premultiplication efficiently.
Change-Id: Iee137c2f7020246478d09e880a7a1bf2ed3c6fd4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We usually do not keep a lot of QPainter states, but we need to
call 1 allocation and 1 reallocation for keep 4 states. It will be
better to use QVarLengthArray with preallocation for 8 states.
Change-Id: Iacb6aa7a73807491534b1a915453f218d6e4305b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Calculate the size of m_spans before allocate them.
Change-Id: Ie572f243d6c167f42e807701bf9bf76a3c6c0c69
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Avoid a couple of branches in QMetaObject::activate().
Change-Id: I15394d1ede48be771797fc5f64a5de6387e6f814
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Cleanup the Widget examples - use the new signal/slot syntax where
possible - animation, effects and graphicsview subdirectory
Change-Id: I6cbaea6e628eb06f8e0ca6a0b795030a66b83878
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Cleanup the Widget examples - use the new signal/slot syntax where
possible - painting and richtext subdirectory
Change-Id: If0e365ab1cabf9184076595494cfca151406fddf
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Since QStyledItemDelegate should be preferred over QItemDelegate the
documentation should point to QStyledItemDelegate instead.
Also mark some internal classes which derive from QItemDelegate so they
will not be forgotten during Qt6 porting.
Change-Id: I2dd17feedf8593afac5ca16d2546e1f0bc0250ae
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The private member parentCursor was not populated since Qt4 times. This
lead to an unexpected behavior: When QProgressDialog::reset() was called
and value() was greater than 0, the cursor of the parent was set to a
default-constructed QCursor.
Therefore remove QProgressDialogPrivate::parentCursor.
Fixes: QTBUG-72660
Change-Id: I195688300e07ddbbb7c17a9f471513c542269c2a
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The QFormLayout did not handle Qt::AlignCenter, only
Qt::AlignLeft/Right for the labelAlignment property.
Therefore also add the code for Qt::AlignHCenter to be consistent
Fixes: QTBUG-2780
Change-Id: I0d6dd61ba583e3ee37a003fae000d992505c08d1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Replace deprecated foreach macro with range-based for loop
Change-Id: I0d1f2cfd557d02ccc48b41b3fea137baa2962fc1
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
qtbase/src/corelib/kernel/qmetatype.cpp: In static member function ‘static void QMetaType::destroy(int, void*)’:
qtbase/src/corelib/kernel/qmetatype.cpp:2599:27: error: ‘info.QMetaType::m_destructor’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (m_typedDestructor && !m_destructor)
~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
qtbase/src/corelib/kernel/qmetatype.cpp:1868:15: note: ‘info.QMetaType::m_destructor’ was declared here
QMetaType info(type);
^~~~
qtbase/src/corelib/kernel/qmetatype.cpp:2600:26: error: ‘info.QMetaType::m_typedDestructor’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
m_typedDestructor(m_typeId, data);
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
qtbase/src/corelib/kernel/qmetatype.cpp:1868:15: note: ‘info.QMetaType::m_typedDestructor’ was declared here
QMetaType info(type);
^~~~
The extended (not inlined) function may be called on a half
initialized invalid instance.
Change-Id: I26d677a8ad2bd0c5846233f06393e774d377936d
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
rather than reproducing vcvarsall.bat's functionality as hard-wired code
in the nmake generator, just invoke the actual script from
toolchain.prf. this is much easier, more future proof, and - critically
- makes the detected variables available to configure's new library &
header search facilities.
[ChangeLog][Important Behavior Changes][qmake][WinRT] Cross-builds will
now ignore pre-set values of %INCLUDE% and %LIB% when building target
executables. If necessary, use configure's -I and -L switches when
building Qt, and pass QMAKE_INCDIR and QMAKE_LIBDIR on qmake's command
line when building own projects.
Change-Id: I36f53e8880d6523f3f6f7a44d40d87d04bd06854
Reviewed-by: Thomas Miller <thomaslmiller91@gmail.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
swap the order of compiler version detection and default path detection.
this keeps a subsequent commit smaller, which introduces a dependency
between the two.
Change-Id: I2d4cbee1fd3555411c18833bbee0201c994a9942
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
because QMAKE_EXTRA_VARIABLES sometimes just ain't enough.
Change-Id: I739e5b6510e4701ca0a86834e4f9a978d7ef1cf4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This works in the same way as JARs are currently provided by dependencies,
and becomes necessary when needing e.g. the Android support/compat libs
for implementing the Java side of a library.
While this is not relevant (yet?) for Qt itself, we hit this with KDE's
notification framework.
Change-Id: Ia87d1a048a493f7bc311abf5761f33d1943cfbe9
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
When setting dtls configuration, we should also copy
backendConfig, otherwise this setting will be ignored.
Change-Id: I4df53e8e6d8c2bd0eb7dddb9928b7883c401d60a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The API for registering temporary peek function was added ~7 years
ago by 78264f333e. It was never been
used for anything else. The solution from 78264f333 also did not work
very well on KDE desktop, quoting Martin Flöser:
"In case the keyboard gets grabbed by another process and immediately
ungrabbed the active Qt application window receives a FocusOut and a
FocusIn event. FocusOut on the grab of keyboard, FocusIn on the ungrab.
Qt registers a peek function for checking the FocusIn event, but the
timespan is too short: the new event is not yet queued. This causes
a QEvent::WindowDeactivate being emitted, followed directly by a
QEvent::WindowActivate. This has quite some side effects, for example
rendering flickering in the GUI (switching to inactive/active in short
time frame), hooks on WindowDeactivate being run, etc.
Real world examples for such short keyboard grabs are global shortcut
listener applications like kglobalaccel5. It has e.g. a passive key
grab on the mute key, which is then turned into an active grab when
the key is grabbed. Kglobalaccel5 immediately ungrabs the keyboard
and flushes the connection if it gets a key event, but it of course
causes the sequence of FocusOut and FocusIn events in the active
Qt window."
Reworked the code to use QTimer instead, which is more elegant solution,
because it does not rely on race-conditions, but uses a concreate time
to wait instead. Also the need to write focusInPeeker() caused us to
duplicate event handlers that were present already elsewhere.
Change-Id: I647e52fb2634fdf55a640e19b13265c356f96c95
Reviewed-by: Mikhail Svetkin <mikhail.svetkin@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Also blacklist tst_QRawFont::unsupportedWritingSystem() and
tst_QGlyphRun::mixedScripts() on windows for now.
Conflicts:
qmake/generators/makefile.cpp
src/corelib/itemmodels/qstringlistmodel.cpp
src/platformsupport/fontdatabases/windows/qwindowsfontengine_p.h
tests/auto/corelib/itemmodels/qstringlistmodel/tst_qstringlistmodel.cpp
tests/auto/gui/text/qglyphrun/BLACKLIST
tests/auto/gui/text/qrawfont/BLACKLIST
Task-number: QTBUG-72836
Change-Id: I10fea1493f0ae1a5708e1e48d0a4d7d6b76258b9
When a button added to QMessageBox has AcceptRole or YesRole, the signal
accepted() will be emitted upon click on the button. If the button has
RejectRole or NoRole, the signal rejected() will be emitted upon click
on the button. If a button has a different role, neither accepted() nor
rejected() will be emitted. This works for both standard and custom
buttons.
The signal finished() with result code will be sent regardless of a
clicked button role.
Also added documentation strings for some methods of private classes in
order to have better tooltips in IDE(s).
Task-number: QTBUG-44131
Change-Id: I521a4e5112eb4cf168f6fbb4c002dbe119aeeb09
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Previously valid but empty sizes i.e. QSize(0, 131073)
where accepted, but such sizes make no sense for an image
since they actually contain no pixels
Change-Id: Ie61e33401ad8aaea633646c66fc03f36793e839c
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This patch removes unused signal and variable.
Change-Id: Ia4eaf083493d3d37e3ff22e0380d5a5ee69f91cf
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
This way Qt builders can see if everything has been configured
properly for XCB GL integrations at configure time, instead of
at the end of the build process.
Change-Id: I00740cc2edd7f6ecfcda0ddfb22649d1b4db4aa2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
xcb-xlib is used by XCB and EGLFS_X11.
xlib is used by XCB, EGLFS_X11 and offscreen plugin (not listed
currently under "QPA backends").
egl_x11 is used by XCB GL integration plugin and EGLFS_X11.
Renamed X11 -> XCB under "QPA backends", because that is the
correct QPA name.
Change-Id: I455ac3a41da3ab84453d8de0edc657c3a5e064c9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Its been available by default since at least libxcb 1.5, and in Qt 5.12
we have even increased the minimal required libxcb version to 1.9.
Having configure switches for extensions is a legacy from Qt 4. There
are still few exceptions in Qt5, where the reason is that we have to
support Linux distributions that don't ship recent enough libxcb.
Task-number: QTBUG-30939
Change-Id: I0a02d93b6411119ec018b0cb8fe5c63beeab62ee
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
xcb-render is a C interface for X11 extension. xcb-render-util is a
utility library that complements xcb-render by providing convenience
functions and interfaces which make the raw X protocol more usable.
Bumped xcb-render-util version to avoid having include hacks. We were
bundling 8 years old release 0.3.8 (Apr, 2011). 0.3.9 is the latest
release and it was relesed 4,5 years ago (Jun, 2014). All CI machines
have 0.3.9. The only thing that have changed in xcb-render-util sources
since 2011 is that we don't need to have various hacks to include
xcb_renderutil.h in C++ files. Upgrading bundled XCB libs was also
requested in QTBUG-71109.
Task-number: QTBUG-71109
Change-Id: Ib261f7584ad81be95660123b007e2200a3042f4c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
We would draw the tab and space symbols without setting the correct
font on the painter first.
[ChangeLog][QtGui][Text] Fixed so ShowTabsAndSpaces will use the
correct font.
Fixes: QTBUG-62540
Change-Id: I3b7d6d317473e7aab722dafe1a128c57a830f634
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Cleanup the Widget examples - use the new signal/slot syntax where
possible - tutorials subdirectory
Change-Id: I741589f6616578412ad74f8371e0e3c87df783a2
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Cleanup the Widget examples - use the new signal/slot syntax where
possible - layout, statemachine, tools and touch subdirectory
Change-Id: I466b309b643ef7ffc27be7591fa10f4c75cfd3f8
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
This reverts commit c1fc47b06a.
CI is now running on 18.04 hosts and vmx is enabled on that level.
As the update in QTQAINFRA-2288, the macOS 10.13, openSUSE 42.3
and Ubuntu 18.04 had vmx enabled inside the VM.
Change-Id: I6ec4094ca826418f46f417b3cab89678bb089417
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Hardware and camera button handling are phone specific APIs we no longer
support in Qt.
Change-Id: Ib11f894a426b8e4b71acf24876437ddab2cea548
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
The focus rect for the QComboBox was removed during the refactoring done
in 5c60e4b8f9.
Readd the functionality in a similar to
QWindowsStyle::drawComplexControl().
Fixes: QTBUG-69239
Change-Id: I74e4060fbe52432318e3c986fc838cf353d99843
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The function is setting the brushes correctly in the return value, but
without updating the resolve_mask, making it return wrong results in
functions like isBrushSet or the debug operator.
Added a unit test for the member function, since the class is still
mostly untested, and clarified the reference documentation of what the
function is supposed to do.
Change-Id: Iaa820dc44f095e125f9375cb00da5569986803c6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The keyboard search in QAbstractItemView did not handled Key_Space
because this is also an edit trigger. It was also consumed if no edit
was started.
This patch changes this behavior and triggers the keybaord search when
the editing was not started.
Fixes: QTBUG-48505
Change-Id: I58e0d283f863c9b12ac5d2f6171f15522bd7c30a
Reviewed-by: David Faure <david.faure@kdab.com>
The keyboard navigation did not consider the disabled state when trying
to find the new index under all circumstances. This lead to a
non-working PageUp/Down/Home/End navigation when the first or last item
was disabled or hidden.
Fix it by explicitly checking if the calculated item is hidden/enabled
and skip it in this case.
Fixes: QTBUG-44746
Fixes: QTBUG-34832
Change-Id: Ifa3b64a405e67b792db5db9d186d426fcfe183fb
Reviewed-by: David Faure <david.faure@kdab.com>
