Allows us to detect cases where the requested vsync combination was
not possible to fulfill.
Change-Id: Ie8f3665129f7a1ab7fcefb94b2298d54520b753a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The FPS is now calculated and output on the command line in a single
place. The animated fps counter has been replaced with a vertical line
which should make it easier to observe tearing issues when vsync is
disabled.
Change-Id: Id356fc1958c048d85aba48edfed59124454038d4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The animated FPS counter should be enough to observe smooth animations,
so we use the color of the window to visualize frame latency.
Change-Id: I1171a1c4bdc261ca8655771290c6735357821781
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Changes the --extrawindows option to --numwindows with a default of 3,
and layouts all windows in rows and columns so that they are all
exposed at startup.
Change-Id: I5e8d63a14b778bcddc2fee3bf7e78d6664532b5b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This manual test pretends to be a modest safeguard
against QMenu related regressions on macOS. It takes
a slightly different approach than the existing menus
manual test, tracking observed regressions instead of
providing extensive coverage (though this may change
in the future).
These regressions are listed as task numbers below,
most of them arising from the now infamous change,
09acf326db QCocoaMenu: Decouple NSMenuItem from NSMenu
So, from now on, please run this and the menus manual
tests and look for regressions every time you make a
change regarding QCocoaMenu and related. And, if you're
fixing a regression, add the regression example to the
Menurama manual test.
Task-number: QTBUG-52931
Task-number: QTBUG-53085
Task-number: QTBUG-53251
Task-number: QTBUG-54633
Task-number: QTBUG-54637
Task-number: QTBUG-54698
Task-number: QTBUG-55121
Change-Id: I276e916dcdf00f1a44faf64d87050bc3a037a3b5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Output the class hierarchy until a base class within QtWidgets is found.
Change-Id: I0ecee22e2ead1dea8b39cce8ca2f0739290aac22
Reviewed-by: Alexandru Croitor <alexandru.croitor@theqtcompany.com>
So we know what we're looking at if there's a test failure. This is like
QNetworkInterface.
Change-Id: Id75834dab9ed466e94c7ffff1444bf51f615e944
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the "generated by qt creator" header is not supposed to be checked in.
Change-Id: I7626c0bd16f83d81b3facd216a04e7d505942256
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Allow tmpfs filesystems to be reported, as they're often usable by the
user, mounted in /tmp and in /run (the fs for $XDG_RUNTIME_DIR).
But disallow anything whose device is not a pathname. This catches most
of everything else that wasn't specifically tested for before, like
virtual fuse filesystems, like GVFS.
Change-Id: I3e15a26e0e424169ac2bffff1417b7cee0f8ec97
Reviewed-by: Ivan Komissarov <ABBAPOH@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The path "/usrfoo" starts with "/usr", so if you tried to get
QStorageInfo("/usrfoo") when "/usr" is a mount point, you'd get the
wrong filesystem.
[ChangeLog][QtCore][QStorageInfo] Fixed a bug that caused QStorageInfo
to report information for the wrong filesystem if there is a mounted
filesystem at a path that is a prefix of the requested path (e.g., it
would report "/usr" filesystem for "/usrfoo").
Task-number: QTBUG-49498
Change-Id: I3e15a26e0e424169ac2bffff1417b7a27cd0132d
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Fix a warning about a missing case statement.
Change-Id: Ic89646704d62668cf83c463dbf6e9b549a4b5200
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
newer versions of qt creator understand QMAKE_EXTRA_COMPILERS and
INSTALLS, so there is no need to list the files twice.
Change-Id: Iccf3cc3248daf3422b8c366c2eb2d2f46c5f08d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Miter limits below 1.0 are not valid in PDF and trigger an error in the
Reader. This change enforces a minimum miter limit of 1.0, and it adds
a manual test for producing a PDF file demonstrating this issue.
Task-number: QTBUG-52641
Change-Id: I1c78b1c4a44579e95e1cddfb459926d304e60165
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
We have a bug that proximity events are generating them spuriously;
this is a way of testing it.
Task-number: QTBUG-52921
Change-Id: I490dfcf8d5b325f612b733e29fd49de9418bb19e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Add dragging functionality to the labels showing a pixmap
cursor, allowing for testing DnD with pixmaps with device pixel ratio.
Task-number: QTBUG-46068
Task-number: QTBUG-50938
Change-Id: If6781f380864e614efd4328e8b880b57cd900511
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
- QMouseEvent::screenPos() should be global desktop position
- QDesktopWidget::screenNumber() should tell the correct screen
- QGuiApplication::topLevelAt(screenPos) should find the window where
the mouse is clicked
Change-Id: I9a63ab3ee1944b7246551d0f3d5e37f0d2aa5457
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Apply the device pixel ratio from the widget unless Shift is pressed.
Task-number: QTBUG-46068
Task-number: QTBUG-50938
Change-Id: Ib806b7e545fa228043566800d22d1002728732bf
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Add a toggle for setting a triangular mask on the main window.
Task-number: QTBUG-50938
Change-Id: Id4a3ee0b80e170f4ee1d195e60ce7bfa8e524359
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Add a command line tool that can either take a list of window ids and output
information on them using a verbose debug stream or embed foreign
windows using QWidget::createWindowContainer().
Task-number: QTBUG-41186
Change-Id: I14e436b5d08828f5b78b29e0701daeffe11367d3
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
It now exists in QtGui.
Task-number: QTBUG-48849
Change-Id: I9107c96e0010252bc50bcb02ef006cb46bd942df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Empty clipRect means "clip away completely", not "no clipping".
Task-number: QTBUG-50719
Change-Id: I6a9dd66130716a921fe9fc245582274e3c9718fe
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
- Make it possible to pass an optional root widget to dumpAllWidgets().
- Add option to output size constraints of widgets/windows.
- Output normal geometry of top levels.
Change-Id: Ib48809d070c5721fe4688a2ad39cb99f286618de
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
When recursing over the windows, the code did not take into account
that EnumChildWindow enumerates grand children as well. Exclude
those by checking for the direct parent in the recursion so that
the hierarchy is printed correctly. Add more information about
class and module and rearrange the output a bit so that the window
title is more prominent.
Task-number: QTBUG-50206
Change-Id: Iffb12c44eda9d09da5eb14a8405aee52ed3aa849
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Currently QOpenGLWidget and QQuickWidget do not support having native
child widgets inside the same top-level window. In some cases this is
inevitable, f.ex. multimedia may require native windows when used from
widget apps. winId() calls made for various (valid or invalid) reasons
are also problematic.
There are no blockers for supporting this setup, however. By storing
multiple texture lists (one for each subtree where the root is a
native widget), adding the missing markDirtyOnScreen calls, letting
each native widget access the correct texture list (i.e. the one
corresponding to its children) when they are (separately) flushed, and
fixing composeAndFlush() to take the update region and the (native
child) offset into account, it can all be made functional.
The change also fixes the issue of keeping GL-based compositing
enabled even after all render-to-texture widgets in the window become
hidden. Due to the changes of how such widgets are gathered,
composeAndFlush() is not invoked anymore when no such widgets are
discovered for a given native parent. This is great since having
compositing enabled infinitely is an issue for applications like Qt
Creator that implement certain views with QQuickWidgets but cannot
afford the cost of texture uploads in other places (e.g. for the text
editor) on slower machines.
The openglwidget manual test is greatly enhanced to test various
situations (MDI, scroll areas, tab widgets, QOpenGLWidget as native
child, QOpenGLWidget with non-tlw native parent, etc.)
Task-number: QTBUG-48130
Task-number: QTBUG-49172
Change-Id: Iad098359c8bcf749f01c050da0853415e1550eda
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
* Georgian lari currency symbol
* A large collection of CJK unified ideographs
* Emoji symbols and symbol modifiers
* Letters to support the Ik language in Uganda, Kulango in
the Côte d’Ivoire, and other languages of Africa
* A set of lowercase Cherokee syllables, forming case pairs
with the existing Cherokee characters
* The Ahom script for support of the Tai Ahom language in India
* Arabic letters to support Arwi—the Tamil language written in the Arabic script
For more details, see http://www.unicode.org/versions/Unicode8.0.0/
[ChangeLog][QtCore] Unicode data updated to v.8.0
Change-Id: If255f95c9c45655b721369a116299da3cabbba0a
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Assuming that the target is always GL_TEXTURE_2D is not going to be sufficient
when working with EGLStreams for example where GL_TEXTURE_EXTERNAL_OES is a
must. The blitter is now changed to support multiple programs so other targets
can easily be added as well in the future, if necessary.
Change-Id: I247d30600222fb5af6305ed5d9740baa5e43e83e
Reviewed-by: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
Implement as generic "@Nx" support in an exported
qt_findAtNxFile function.
3x devices now get one extra file existence test
in cases where @3x versions are not present. 1x
devices are still on the fast path where there are
no extra file system accesses.
Add an @3x image to the highdpi manual test.
Change-Id: I4ce3fc245ada01ea410abe1443ceb1e3abf7c17f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Need to survive having screens detached/reattached on X11.
Task-number: QTBUG-42985
Change-Id: I81cf9721f0cb61a29180c60d44d588063266e651
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
This commit moves the functionality from QtNetwork's QHostInfo to
QtCore. Note that due to Windows ws2_32.dll's quirky behavior of
requiring WSAStartup before calling gethostname, this change required
moving the initialization to QtCore too.
On Linux systems, gethostname() gets the name from uname(), so we bypass
the middle man and save one memcpy.
Change-Id: I27eaacb532114dd188c4ffff13d32655a6301346
Reviewed-by: Erik Verbruggen <erik.verbruggen@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add several new tests to verify that Qt behaves properly when
high-DPI scaling is enabled. Add a generic framework for
manual tests for good measure. This could be refactored and
used for other manual tests later.
Includes tests written by Morten and Friedemann.
Task-number: QTBUG-46615
Change-Id: Ib6762ec1454711e71f0c094b19015932b99e8d6d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
f9408317e7 was unfortunately
approved though it had an annoying bug. The patch had
an assign of a visual index into a logical index.
This patch fixes that issue.
Change-Id: I9cc75e4e9701858c92e2c3e5817415041b42f8e8
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Add command line options for
- Grabbing gestures
- Suppressing mouse and touch events
Add gesture events to the log.
Add a hierarchy of gesture classes storing the parameters
of finished gestures with drawing functionality and
implement for pan and swipe.
Task-number: QTBUG-46195
Change-Id: I019fe5b60116316a54e11b2c30e1d34f5e72bcf0
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
