It's stale. Thanks to Olivier B. for pointing out.
Change-Id: Ie01831ddac5446fdbdeefffd15463530818cff9e
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
If the db isn't valid, then that's the actual issue, not the fact that we're
getting the same invalid db (with the same driver QSqlNullDriver) in
multiple threads.
Change-Id: I95490818ed78e741c3823e115f139c2cff01b0b1
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Minor tweak: QList<int> is taking 64bit per entry, QVector<int>
only 32bit - this should reduce memory usage a little bit.
Change-Id: I3e17269feb4840343f5cecfc71f8fccd70edc80f
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Rearrange QSqlFieldPrivate members to only need 64Byte instead 72 in
an 64bit environment.
Change-Id: I620c18aca06a11b7ab4bd8e99b377b9d823da7f4
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The linker complains:
LINK : warning LNK4281: undesirable base address 0x67000000 for x64 image; set base address above 4GB for best ASLR optimization
And it's not really required anymore, as the recommended /DYNAMICBASE is
the default.
Change-Id: I56b444f9d6274221a3b7fffd150caab1beecfd43
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The functions had been added without documentation.
This update adds the documentation.
Change-Id: Ib29e9356b26c248b5fcc9f13ecf77371fbae054a
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
The fixes included undocumented enum values, which are now
marked as omitted, adding a test for Q_CLANG_QDOC for a
couple windows enum values, adding \fn commands for a pair
of member functions in QLocale, and a \fn command for an
obsolete function in QSqlError.
Change-Id: I12a8ea7287039096b9cfe7870d2ab213a3d78dcf
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We do add, remove or update third party code in minor releases,
sometimes even in patch level releases. However, the documentation is
supposed to be valid for all existing Qt 5 versions, but doing this for
attributions would require infrastructure we don't have.
Therefore rather make it explicit which Qt version the attributions
apply to. Also mention since when Qt is available under LGPLv3
(starting with Qt 5.4).
Task-number: QTBUG-65665
Change-Id: I328b5bf0c143f78ea61aad51f0644c3cbb6dee49
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
The template clause was missing in the \fn command for
a member function of a template class.
Change-Id: Ie1a8f8372d3183f05f02e518b363a7bac735abbb
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
As the HANA ODBC driver does not provide scrollable
results per default, the connection has to be established
with a specific option.
Change-Id: I14751a94f61d6fffd6d56c39076c24ec4d1f88ef
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Joachim Puhr <jpuhr@gmx.de>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
With this change, it is possible to significantly reduce memory
consumption of applications that fetch large result sets from databases.
The implementation is based on the new functionality called "single-row
mode" that was introduced in PostgreSQL version 9.2:
https://www.postgresql.org/docs/9.2/static/libpq-async.html
It also uses asynchronous commands PQsendQuery(), PQgetResult():
https://www.postgresql.org/docs/9.2/static/libpq-single-row-mode.html
[ChangeLog][QtSql][QPSQL] Added support for forward-only queries (requires
libpq version 9.2 or later)
[Important Behavior Changes] The QPSQL driver now supports forward-only
queries. To use this feature, you must build QPSQL plugin with PostreSQL
client library version 9.2 or later. See the Qt SQL documentation for
more information about QPSQL limitations of forward-only queries
(sql-driver.html).
[Important Behavior Changes] If you build the QPSQL plugin with PostgreSQL
version 9.2 or later, then you must distribute your application with
libpq version 9.2 or later. Otherwise, the QPSQL plugin will fail to load.
Task-number: QTBUG-63714
Change-Id: I15db8c8fd664f2a1f719329f5d113511fa69010c
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
While adding the possibility to access values for QSqlRecord with
decorated field names (table.field), some string-allocations were added
which created a remarkable slowdown. Replace the QString allocations
with QStringRef avoids those allocations and restores the speed for
normal operations (apart from on QString::indexOf() call and some
integer comparisons)
Task-number: QTBUG-65226
Change-Id: I9e458523891421abce9e4a7ed931fec000dcbe76
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Since DB2 can potentially have more than one error code, we need to join
these together using ';' as a separator.
Task-number: QTBUG-142
Change-Id: Idd376df84a8e3ae4c05b4722b4d0020fa4f3edad
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QSqlDatabase objects can only be used in the thread that the connection
was opened for. So if the driver was created already then we check if
the thread is correct. If it is not then we output a warning and return
an invalid QSqlDatabase.
[ChangeLog][QtSql][QSqlDatabase] QSqlDatabase::database() will return
an invalid QSqlDatabase if the calling thread does not own the requested
QSqlDatabase.
Task-number: QTBUG-216
Change-Id: Ib5a25aa62129e3925f9819109af05961e5178bc5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- adjusted to new configure system realities
- centralized 'make install' instructions
- fixed 'make' command for mingw
- externalized the license compatibility question
- removed dated information about postgresql client libs
- removed dated claim that freetds is not stable yet
- updated official sybase client link to point to sap support
- removed apparently bogus "demo" include path from oci instructions,
based on the archive content description
- removed troubleshooting item about static builds - one can use static
"plugins" with a static build just fine. and building dynamic plugins
for a static build is plain impossible to start with.
- removed troubleshooting item about build key mismatch, as build keys
have been removed in qt5
- removed "general info" sub-section titles, as that's bad style
- misc language and minor content fixes
Task-number: QTBUG-62479
Change-Id: Ic4efa9e20a5966b6fc646062aec6d1a8d4ff4158
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As the numercialPrecisionPolicy can be set and subsequently retrieved
from the QSqlDatabase's driver, then when copying the QSqlDatabase, we
need to set that appropriately too.
Task-number: QTBUG-10452
Change-Id: I2c63748365ab4e9fbc29d8d460d80d2e2a0ee385
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
The function and type is only used in the tests and has no benefit in
applications so it should be marked as internal to avoid confusion for
those implementing their own drivers.
Task-number: QTBUG-56278
Change-Id: I0f2ae27d41b133c4f0d3b0d390688fd3307592ce
Reviewed-by: Andre Somers <andre.somers@kdab.com>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Profiling a large model showed that QSqlRecord was being copied and
destroyed from a few places, due to use of QMap<int, ModifiedRow>::value()
where ModifiedRow has two QSqlRecord members. This can easily be avoided
(in the common case with no modified rows) by using constFind() instead.
My testcase (iterating over a model with 126936 rows) went from 1266 ms
to 896 ms.
Change-Id: I04e98b5573ef24165bf6cff19946e5bedd0fb0ba
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
src/corelib/io/qfiledevice.cpp:741: warning: Can't link to 'setFileName()'
src/corelib/io/qfiledevice.cpp:772: warning: Can't link to 'setFileName()'
src/corelib/io/qfiledevice.cpp:790: warning: No such parameter 'time' in QFileDevice::setFileTime()
src/corelib/io/qfiledevice.cpp:790: warning: Undocumented parameter 'fileTime' in QFileDevice::setFileTime()
src/corelib/io/qfileinfo.cpp:1344: warning: Can't link to 'FileTime'
src/corelib/kernel/qcoreapplication.cpp:2007: warning: Can't link to 'isTranslatorInstalled()'
src/gui/opengl/qopenglextrafunctions.h:468: warning: No documentation for 'QOpenGLExtraFunctions::glBlendBarrier(void )'
src/gui/opengl/qopenglextrafunctions.h:494: warning: No documentation for 'QOpenGLExtraFunctions::glGetGraphicsResetStatus(void )'
src/gui/opengl/qopenglextrafunctions.h:475: warning: No documentation for 'QOpenGLExtraFunctions::glPopDebugGroup(void )'
src/sql/models/qsqlquerymodel.cpp:217: warning: Unknown command '\override'
Change-Id: Ide0ce911f6faf964fda8f32fac433da7d2cb11de
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When you are using a query that pulls from a number of different tables
then it can be ambiguous as to which table a particular field belongs to.
So this will make it possible to determine the table that a given field
belongs to if it is set.
Task-number: QTBUG-7170
Change-Id: I49b7890c0523d81272a153df3860df800ff853d5
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
our binary packages come without many sql drivers, because they have
proprietary dependencies we cannot ship. not every user wants to build
all of qt from scratch, so it makes sense to make it possible to
"enrich" the existing installation by compiling just the drivers. to
enable this, the drivers' configuration must be independent. but note
that it's still not possible to configure a single driver - the entire
sqldrivers directory is configured at once.
a side effect of this is that the availability of the sql plugins
cannot be made known with publicFeatures any more, because there is no
associated module pri file to put that information into. that should be
made inconsequential by making qtHaveModule() work for plugins.
Task-number: QTBUG-58372
Change-Id: Ibdebe3199688a57f93cea82dc15623081d1280f5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
