... as that causes debug+release installs to overwrite each other's
postprocessed files.
introduces CONFIG+=sliced_bundle, which instructs qmake to create
file-by-file install commands. we don't know whether people are not
putting files outside qmake's knowledge into the bundle build dir, so
this mode is not necessarily backwards-compatible, and thus off by
default.
Task-number: QTBUG-28336
Change-Id: I23e90985ccd3311f0237ed61aadca6d7ed8325b7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
by convention, $target.framework/$target links to
Versions/Current/$target, not Versions/$version/$target.
Versions/Current already links to $version.
so this adds one indirection, but is otherwise the same.
Change-Id: If3d1a3713712f4221ec31883977e50bce6f91764
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this went unnoticed so far, because the mac qmakespecs don't define a
strip command to start with.
Change-Id: Iac3e7ffa6f400373552134a44b9713aaf5f44589
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
replace() doesn't detach if there is nothing to do.
Change-Id: I845b585c766f44a670ca3af1fc11ba03e7317622
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qmake has the rather bizarre logic that QMAKE_LIBS* is escaped rather
early (instead of right before being written out the the Makefile).
consequently, we need to explicitly escape the paths from the prl files
as well.
Task-number: QTBUG-32326
Change-Id: Ieaf81113d3ca3cf5d8a1ef87c83c5721d6b473ee
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
escape backslashes before the quotes, as otherwise we'd escape the
backslashes we just used to escape the quotes.
Change-Id: I88e12c0c2cfc53e0ab8dce9807b06dfce6aa6e78
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... as that is the CWD of the command (since b139e7e96e5c).
leave the resolution relative to $$PWD as a fallback with a warning.
Investigated-by: Harald Hvaal <hhvaal@cisco.com>
Task-number: QTBUG-19352
Change-Id: I75de9444a647cd9e6f509e3d8eb3382dc985e5ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Scripts are available in internal mkdist repo.
Added license tags, updated licenses and copyrights/contacts
Change-Id: Ibc734275f3000987eaa4f5c57f19d4e1fda2c479
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
it's not necessary to immediately re-calculate the roots after assigning
QMAKE_PLATFORM - it's sufficient to do it on-demand, so merely
invalidate them. this avoids that we re-calculate them multiple times
without ever using them in between while processing specs with
distributed platform assignments.
Change-Id: If508594764811b96a577fc81c5ded34ab0453148
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
(cherry picked from qtcreator/28df27d924bb407791a76de8159c9ffa6efde283)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
looking up the same files in the same locations over and over again
is a rather significant waste. in particular, looking up the CONFIG
flags that don't correspond with features has a measurable impact on qt
creator's project loading time.
Task-number: QTCREATORBUG-9154
Change-Id: Ibae3d8b7797e706a6416a7d45c77734ab1281b51
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/fa27cd79e05aed4ebd16d5648480cc7d48fefd43)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
just directly use the filename we constructed it from.
Change-Id: Ia428a2cb4b192fea6bde62dfbf35361bcfc4b21e
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/571234786a3ff7e8e3a9220f12d22a9f74f7a53c)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When defining QMAKE_LFLAGS += /MANIFEST:NO to pro file,
it is not written to vcproj in VS2008.
Added MANIFEST:NO generation to vcproj
Task-number: QTBUG-31975
Change-Id: I5f84b30db711bf9c317ca20dc65b207140edb398
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
makes for less visual noise and a tiny bit more efficient code.
Change-Id: I587707fa4e2dc9bead9435bf5caf3a98ab680725
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Add mkspec win32-msvc2013 and make VS 2013 known to configure and
qmake.
Change-Id: I6e63a4d679727a8a3f068f377956185996d72bce
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
contrary to what one may expect, it's actually *not* supposed to remove
the meta-characters it interprets.
luckily, this function is not used much any more ...
Task-number: QTBUG-31877
Change-Id: I2b60f9b173140da78db2b07b596cc2e5f6e6d555
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
We were only fixing QMAKE_C/CXXFLAGS, not the defines we then appended.
Change-Id: Iaa4a394738658c45aae83941ebe54470d6d8e250
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If both the rc_file and res_file was added to the project then in MSVC
2012 it would cause an error complaining of a duplicated resource.
Task-number: QTBUG-29826
Change-Id: Ib3401b423208cd8c90895038c9cbadd80c39b542
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The removal of embed_manifest_dll or embed_manifest_exe from CONFIG
now disables the embedding of manifests in VS project files.
Task-number: QTBUG-5301
Change-Id: I031318883edca6f9b63a7981ef6c44e3f123f6fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The POSIX function uname() can return any non-negative value for success.
- Example: Solaris 10 returns 1 on success.
See: http://pubs.opengroup.org/onlinepubs/009695399/functions/uname.html
Change-Id: Ic3d51f94a31d8b562b28a2d09df3d31b04c77dc8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
For vcproj files we should not automatically add a dependency for extra
compilers as this should be done via the depends variable for the extra
compiler instead.
This fixes a problem where something like '@echo command' was used in the
command as it would depend on echo and not the actual command anyway.
Change-Id: I7c0aa0d62143aa39c518e8bce65f302afdba33c9
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
as of qttools/18a5e89623815f5355b4173a2e93609eb10289d1
Change-Id: I75cb55e0c404449a4e0d963e09185287a3f6343e
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
this avoids that an empty rebuild after a complete build re-runs qmake
everywhere again.
according to 1f83f0cf2a this is the behavior i originally intended,
but somehow it got lost when switching to the new interpreter.
Change-Id: Id5158d7e272fdee4f4a041fb7c828295a0a86684
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead, teach qmake to use the mkspecs dir from the source dir as well.
Change-Id: I9edac11f8997fcb0594d0a67419d4733dd4ed86b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this is for shadow builds during build time, where the respective files
are expected in the source dir.
Change-Id: I18dcfbdef99e1562a51dacac333642cae8105ebd
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
these files function as "anchors" for mkspecs/ and features/ directories
used by projects which load these files. ironically, these files didn't
see these feature files themselves.
Change-Id: I590855eb4a9d2c72b9abfcaa431d2f85a719c6e2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
we were finding features/ directly in the source & build root, and we
were finding features/ under mkspecs/ from $QMAKEPATH and other mkspecs
locations, but we omitted the "transitive hull". this was
counterintuitive.
Change-Id: I9823e6606467c98f264c81385250da92311f51ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
sync up implementation with qtcreator.
Change-Id: I6a1578818512fa3b0773faf276a1d56881eb06d7
(cherry picked from qttools/582cbddc6ba1b74a7e4e07e0b5c23d47de6838cb)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
sync up implementation with lupdate & creator. no actual effect on
qmake.
don't filter out ^QMAKE_.*:
- QMAKE_MKSPECS is not printed any more, so needs no filtering
- QMAKE_VERSION can be simply used now, as we are now rather close to the
real qmake
- QMAKE_SPEC and QMAKE_XSPEC need to be fetched
- this fixes the default spec resolution
Change-Id: Ifcfa8b5b9e2bbf5d995940e1bb7f55e7d67aed3e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
(cherry picked from qttools/0037bef09ca77c5ae4d20bd09294ba1d57537e09)
sync up implementation with lupdate & creator. no actual effect on
qmake.
Change-Id: I1bdeb759e895e4200f09332dadf8a6cef348182f
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
(cherry picked from qttools/94ab2efb2d155d3c1ca7b91c1daf443a149bcf1f)
This reverts an earlier change that tried to fix the relationship between
Qt's concept of output directories with what Xcode expects, but it broke
DESTDIR. The relationship between Qt and Xcode is still a mess, but at
least DESTDIR now works.
Change-Id: I44f056d48c87359a609e0337da266120ba4eb155
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
