The "rbit" instruction requires ARMv6T2 or higher. This was found in the
CI when building the imx6 target:
Compiler: arm-poky-linux-gnueabi-g++
Flags: -mfloat-abi=hard -mfpu=neon
Errors from the assembler:
{standard input}:3078: Error: selected processor does not support ARM mode `rbit r3,r3'
{standard input}:7341: Error: selected processor does not support ARM mode `rbit ip,ip'
That compiler defaults to ARMv5T. That's obviously wrong for an i.MX 6,
which is a Cortex-A9 (ARMv7), but the correction applies for older
processors.
Change-Id: I56c276fa411977dd7cd867d62adf021e4909302c
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
QJsonValue, while comparing two QJsonArrays, should consult also length
of the arrays, because a different than null base pointer doesn't mean
that an array is not empty.
Change-Id: If76739355a4e74b842e836289565f98d95c006d5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QJsonValue, while comparing two QJsonObjects, should consult also length
of the objects, because a different than null base pointer doesn't mean
that an object is not empty.
Change-Id: Ibee1849ef9fed15d32f2c8f2aad9b053846e46b7
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Before this change such code:
QJsonObject o;
o["blah"];
would create property "blah" and assign null value to it, while
this code:
const QJsonObject o;
o["blah"];
would not. The change unifies the confusing behavior. Now reading
a non-existing property, is not causing a property to be added
in any visible way.
Internally QJsonObject stores a special hash of undefined, but
referenced values. Such reference is supposed to not live long,
only to the first compacting or assignment.
Change-Id: Ib022acf74ff49bad88d45d65d7093c4281d468f1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The operator should always return an undefined values for an empty
object
Change-Id: Ic38f7660d77c64b2d001967bc5109df4185db74a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Fix tests widgets leaking widgets and ensure it stays
that way by adding a check to cleanup().
Task-number: QTBUG-38858
Change-Id: I77a81d823c68cf0b4e51c2da55b1c473d6e4170b
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
No actual reason for this test, except my curiority. Then again, it's
good to have this check, too.
Change-Id: I815fce7e4dbe76e21cac29beb1dbfc1083191d24
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
No actual reason for this test, except my curiority. Then again, it's
good to have this check, too.
Also checks that the last entry in the init_list "wins", which is
not how std:: containers work.
Change-Id: I4f7d1228f2b90a904b6c3f99e54afcd9970b723e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
No actual reason for this test, except my curiority. Then again, it's
good to have this check, too.
Also checks that the last entry in the init_list "wins", which is
not how std:: containers work.
Change-Id: Ia284d093cd0029432372630e81657fb687b9516f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This fixes high CPU load for upload devices that don't generate
a constant stream of data. Their readData() function was called all the
time without returning actual data.
This was noticed when implementing an upload device that emits data in
a limited way for bandwidth limiting.
[ChangeLog][QtNetwork][QNetworkAccessManager] Fixed high CPU load when handling
POST/upload QIODevice that generates data on readyRead().
Change-Id: Iefbcb1a21d8aedef1eb11761232dd16a049018dc
Reviewed-by: Richard J. Moore <rich@kde.org>
[ChangeLog][QtWidgets][QLineEdit] The signal textEdited() is now
emitted when the user clicks the clear button created by
setClearButtonEnabled() as well.
Task-number: QTBUG-40287
Change-Id: Iacd303ffd1533f27cfa68a6120cdd370e3d31ddc
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The old unix locking code is no longer working on unix since it locks on
a file descriptor, but QSaveFile creates a new file, and as a result we
get the lock on the wrong file. Also there is no need to keep the lock
held only for reading as QSaveFile is atomic. It just needs to be held
when doing a read before writing.
As a result, since we don't hold the same lock, there could be a race
with an application running an older version of Qt if they are writing
on the same configuration file.
[ChangeLog][QtCore][QSettings] Fixed data loss while writing the config
to the disk fails.
[ChangeLog][Important behavior changes] The locking mechanism inside
QSettings has changed and is no longer compatible with the one of
previous versions of Qt. There might be corruption if two applications
running different versions of Qt are writing to the same config file
at the same time. You must also now have write permissions in the
directory containing the settings file in order to write settings
Task-number: QTBUG-21739
Change-Id: I0844a5e96c8bc1e1222a3dac6cc48170ca77fe1b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QRingBuffer is a fully inlined class used in many I/O classes.
So, it must be as fast and small as possible. To this end, a lot of
unnecessary special cases were replaced by generic structures.
Change-Id: Ic189ced3b200924da158ce511d69d324337d01b6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The default in QTextStream is to use the C locale, so default
QTextStream are not affected. When you set a QLocale on it, the default
was to use group separators (which is the QLocale default too). This
commit makes QTextStream respect a QLocale in which the
OmitGroupSeparators option had been set.
Task-number: QTBUG-39956
Change-Id: I00fbe12fca7f0287c7217deb487ded6582a03b52
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Otherwise, when interrupting the test half-way (e.g. in gdb),
the user's ~/.config/QtProject.conf would be modified.
Change-Id: Id582c4a3fbf0acbed460126fccf0d39b3a09758a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
They shouldn't exist in the first place. They exist in two cases only:
1) mistake by the user in the QLibrary or QPluginLoader constructors or
setFileName
2) as a kludge for setLoadHints before a file name is set (we need to
store the user's requested hints somewhere)
This is important for the second case, as otherwise all QLibrary and
QPluginLoader objects without a file name would share the setting.
Task-number: QTBUG-39642
Change-Id: Iebff0252fd4d95a1d54caf338d4e2fff4de3b189
Reviewed-by: David Faure <david.faure@kdab.com>
This commit makes replaces the loadHints member with a setter, a getter
and an atomic variable. The setter will not set anything if the library
has already been loaded.
Task-number: QTBUG-39642
Change-Id: Ibb7692f16d80211b52aaf4dc88db1a989738a24d
Reviewed-by: David Faure <david.faure@kdab.com>
Allow to alter the default configuration for categories by passing a
message type: All message types with lower severity are disabled in this
category.
This is useful for libraries, which shouldn't mess with the category
registry itself: Setting rules, a category filter ... might cause
conflicts and ordering problems, so this API should be reserved to the
specific application.
For the Qt categories, we have code in the default category filter that
disables the 'debug' category. However, this is hardcoded, and there's no
way so far for other libraries to get the same behavior. With this patch
one can get the same behavior:
Q_LOGGING_CATEGORY(DRIVER_USB_EVENTS, "driver.usb.events", QtWarningMsg);
[ChangeLog][QtCore][Logging] Added QtMsgType argument to QLoggingCategory
constructor and Q_LOGGING_CATEGORY macro that controls the default
category configuration.
Change-Id: Ib2902f755f9f7285d79888ec30e8f3cef95ae628
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
~QDebug() removes any trailing space if autoInsertSpaces() is true.
However, if one uses QDebugStateSaver the global autoInsertSpaces might
be false, but a space was added by a custom operator<<.
Explicitly check for this in QDebugStateSaverPrivate::restoreState. Remove
any trailing space if the local state asks for adding trailing spaces, but
the original one doesn't. Add a trailing space if the local state doesn't
ask for one, but the global state does.
Change-Id: I243b5c76d5ed2c1ec4820da35ab6e254da1551d9
Reviewed-by: David Faure <david.faure@kdab.com>
Passing this flag to QFileDevice::map() will allow writes to the mapped memory
without modifying the file that was mapped. These writes will be lost when the
memory is unmapped.
Change-Id: I7d46b044fc370585de8c06fdb4059f1f1be12d7d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This was prompted by https://git.reviewboard.kde.org/r/119221
Change-Id: Ia148f07f6d711df533693918bbedfa5e7dc02cd5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Uninstall option will uninstall the test afer has been executed.
It is useful when you are using your own phone to execute the tests.
Change-Id: I2a3f6c3a93099d70c98f9ce059da22c409b55843
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Several tests require test data to be deployed with the
application. The easiest way to achieve this on Android
is to add them to a qrc file and use the QFINDTESTDATA macro
to look up the files. This fixes several test failures
in the gui/text subdirectory for Android.
Change-Id: If944bb1fc93434a1b2d6487da829d21bd6b84e87
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Compile on Windows, add command line options to activate the
various tests.
Task-number: QTBUG-38858
Change-Id: I38c6a9a6711831b2bd8b6ea051dd19615cc911a1
Reviewed-by: Alessandro Portale <alessandro.portale@digia.com>
When a dialog was parented on a native child widget,
its window handle was used as a transient parent.
This confused QPlatformWindow::initialGeometry() among
other things. Use top level window as is in Qt 4.
Task-number: QTBUG-40195
Change-Id: Ic82adc276175f92adde825fb2551274351e41f30
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
At the moment, there is no stream information in the cache file. This
can lead to a problem when current stream version differs from version
cache file written with.
As an example, if file written with Qt 5.1.1, QTimeDate in the metadata
stored as 13-bytes value, but Qt 5.2 and later can read additional 4
bytes which breaks following data, leading to network request just hangs
forever.
Adding stream version fixes this problem.
As cache format changed, cache version bumped.
Task-number: QTBUG-36219
Change-Id: I467d8c9fda82bcf9302192f51e7a00d2f6a9ff66
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This prevents conflicts in case of link time optimizations or
precompiled headers are used since we don't include qglobal.h
in the generated code.
Change-Id: I4266c8ae38e6eafefd28b3bde5cb725a24d67ea0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Similar to QTextStream::reset(), this resets the stream format to the
defaults. Its primary use is inside custom operator<< implementations,
where you'd want to have a fixed format regardless of the current
stream state.
Change-Id: I421d76c61f164579bb90cf4195cc5376e2dcf0f3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Prevent the QGroupBox from changing the enabled state of
dialogs parented on it.
Task-number: QTBUG-40132
Change-Id: I91cc6ccf5ade0b3a491020ed947d4aceca62d7b6
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Prevent the splitter from adding them to the layout or showing
them.
Task-number: QTBUG-40132
Change-Id: Ife2be0bbd7e489570ef41f6f72a034b356c65f18
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
It was always constructing a QUrl from the string causing the warning
"Non-native QFileDialog supports only local files" with the
new QUrl-based implementations of getOpenFileUrl(), etc.
Change-Id: Idd9bb432a48865df137f8f39f53014dda150ffe9
Reviewed-by: David Faure <david.faure@kdab.com>
It can happen when the sidebar only has only one item, due to
"My Computer" being missing.
Change-Id: I2b38fef45139f1dfa20d88059e56185c3163a833
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
So that this method is at least called once in the test :)
Change-Id: I3b5fc6b7c464d9e56264c709cfa313d475004207
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
main.cpp(332) : warning C4307: '*' : integral constant overflow
tst_qpainter.cpp(1293) : warning C4305: '+=' : truncation from 'double' to 'float'
tst_qpainter.cpp(1474) : warning C4305: '+=' : truncation from 'double' to 'float'
tst_qtbench.cpp(155) : warning C4267: 'initializing' : conversion from 'size_t' to 'int', possible loss of data
main.cpp(68) : warning C4189: 'fontHeight' : local variable is initialized but not referenced
Change-Id: If6aadd50df7c5cf7d0f33791c9247730a47ddd27
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Instantiate the timer on the stack to prevent it from
interfering with other tests.
Change-Id: I91ffe23b502fcddaeb6d6d3f89ea3d27b083cdb0
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We really do not need to do string parsing there.
Change-Id: Ie2277d9ff0d0445285b7108023941af111d9baca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This revert commit de1d5815c1 which
wrongly fixed a typo. There is no typo because we use startsWith
with that constant.
Also added a test because the %{time} support was added in commit
93563952d0 but the test was missing
Change-Id: Ic96e6f21f989ca3a2905ec6c89b93d2627b77b40
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Broke tst_QMenu::statusTip by closing the menu while it should not. (and therefore, a QTimer::singleShot that fires while following test are running is making the test fail)
This reverts commit 50c04d6318.
Change-Id: Ib4ef8190f945b915fe268745cc64d471994c5e2d
Reviewed-by: Richard J. Moore <rich@kde.org>
This patch aims to implement the session management available on OS X.
Currently applicationShouldTerminate is just a go through that closes
everything and ends the application. The new implementation calls
first appCommitData and cancels the termination properly if required.
This means that if a user wishes to logout, Qt applications can now
cancel that like e.g. answering to Safari asking whether it is ok to
close because of a number of opened tab/window.
Task-number: QTBUG-33034
Change-Id: Icedc8590a1c0934d9bc87d3a43d6702a9903bfb8
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
I've also updated the qfont test so it passes on Android now. Note that
there are no suitable cursive/fantasy fonts on Android, so the regular
default "Roboto" (or "Droid Sans" on older devices) will be picked here
instead.
[ChangeLog][Android] Fixed font selection to prefer "Droid Serif" when
Serif style hint is set on QFont.
Change-Id: I294eebcc4d79410e435bdddce552acc6044753b2
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
At the moment, it's possible to have 2 properties with the same name,
which doesn't make much sense. Notify the user about that so she can
react on it.
Change-Id: I4865b71730921b79ce9dd8abb0cc760b3f1dbfd8
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The function gives a warning if an argument doesn't exist.
Change-Id: I6a4bbbaf2fd241ced06dc71edfe4ef69732606d1
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Remove old message handler hack as we have a new and better api to
ignore warning messages.
Change-Id: Id967b2672fe3e3638db9977500118a19c2afb730
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
When the platform plugin gives us specific fallbacks for a
specific script, we need to respect this, and load the correct
font family regardless of which writing systems it supports.
This is especially important since the common script is adapted
to match surrounding, proper scripts, so characters such as
digits next to e.g. Hebrew text will be marked as Hebrew. On
stock Android, there is a single Hebrew font, and this would
previously be put in all fallback slots for Hebrew regardless of
what fallback fonts were dictated by the platform plugin. Since
this font does not support the digits, they would show up as boxes.
[ChangeLog][Android] Fixed common characters like digits and
punctuation showing as boxes when positioned next to non-latin
scripts.
Task-number: QTBUG-39377
Change-Id: I1555e208a8ddc587c0bbdbfff1600cafdd9442e9
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Allow the user to disable the quoting of QString, QByteArray,
QStringLiteral by passing a "noquote()" stream modifier.
This requires another flag to be added to QDebug::Stream. To
keep BC we're using the QMessageLogContext::version field
to differentiate between QDebug streams created by earlier
versions.
Task-number: QTBUG-37146
Change-Id: I9b215eabfcfd754af16ea87f3ef928d698e37d77
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This property is used to automatically hide tab bar if it has only one
tab.
Originally-by: Denis Kovalskiy <denimnumber1@gmail.com>
Change-Id: I6967f760010fa55bad6a5986c29abe7ccf625cf8
Reviewed-by: David Faure <david.faure@kdab.com>
The check has to detect if boost header is present in the system we are
building for.
Change-Id: I700a11df208c8852ba094d8bff387ad21fa309b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Check result in initTestData().
Previously, QFINDTESTDATA() was repeatedly invoked in init(). The
data-driven cd() test then failed when invoked stand-alone since
cd_data(), which relies on the data path, is executed before init().
Task-number: QTBUG-40067
Change-Id: I91039247e8dcaedd92fa990f1b5f82bc54b17c60
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
At some point since Qt 4.8, the nbsp character has acquired
the whitespace attribute, causing it to be treated exactly
like an ordinary space. To account for this, we add an extra
check in the layout code to avoid breaking on non-breaking
spaces even if they have the whiteSpace flag set.
This is a temporary fix for the regression. The line breaking
algorithm needs to be refactored and support Unicode tr14
properly, which it currently doesn't.
[ChangeLog][Text] Fixed lines breaking on non-breaking spaces.
Task-number: QTBUG-39832
Change-Id: Ibd7e1a11ce4b82c611ecda1542c8638a67bf3cae
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This is trickier than the GLX and EGL implementations due to the
way pixel formats, windows and contexts work. Apart from some
restrictions, it should be fully functional nonetheless.
Add also some proper documentation.
Change-Id: Ia6e3eb1ab2701e439b8621b9092c2b0934ff2151
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
QMetaType::create can call user code and we should not keep mutex held as
this may cause dead lock.
Make sure the tst_qobjectrace actually emit some signal so the test check
there is no race if the receiver object is destroyed while
the mutex is unlocked.
Task-number: QTBUG-39990
Change-Id: I56ca1ae7a11cd7b33c1a68727370972862e11c2f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Like for integers, this is activated only on QLocales other than C.
[ChangeLog][QtCore][QTextStream] QTextStream now uses group separators
when writing floating-point numbers when the locale is not the C locale.
The old behavior can be restored by setting QLocale::OmitGroupSeparator
on the locale.
Change-Id: Ie451b91017746c3a9b11b6211b2ddd09cd295cd2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Currently QOpenGLTextureCache::bindTexture always convert any uploaded
image to RGBA8888 before uploading. This is quite inefficient when
OpenGL natively supports uploading formats in the original format.
This patch adds support for uploading a few native QImage formats. This
also get the performance of QOpenGLTextureCache::bindTexture on par with
QGLContext::bindTexture.
The texture brush used by QOpenGLPaintEngine is also converted to QImage,
since bindTexture will convert it to QImage anyway, and going over QPixmap
may cause an unnecessary conversion.
[ChangeLog][QtGui][QOpenGLTextureCache] Support uploading common QImage
formats directly to OpenGL when supported.
Change-Id: I828a763126441a98e4547c32ef52dddf7c129a32
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Adds basic support for 10-bit per color channel formats to QImage
and the XCB plugin. This will make it possible to paint to and from
these formats, but only at 8-bit per color channel accuracy.
This also fixes Qt5 applications on X11 with native 30bit depth.
[ChangeLog][QtGui][QImage] Added support for 10-bit per color channel image formats.
Task-number: QTBUG-25998
Change-Id: I93ccd3c74bfbb0bd94b352476e5fe58a94119e1f
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
This is used by Orca for geometric navigation (aka flat review) to move
the focus around. It is also generally sensible to be able to
programatically move the focus around. This way of moving the focus
is redundant with the action interface's focus action.
Task-number: QTBUG-40048
Change-Id: I1b61ea843f6bfc3dc00007772e0e5102555ca752
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
It allows to create a QJsonArray instance in C++ by using
a similar expression to JSON. For example:
QJsonArray a = {1, 2, 4};
[ChangeLog][QtCore][QtJson] QJsonArray now supports
C++11 initializer lists.
Task-number: QTBUG-26606
Change-Id: Icc352e518d9649d24176c89e7113d200d5c50b0d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Support CF_DIBV5 for these images so that transparency is preserved.
Task-number: QTBUG-11463
Change-Id: I51881ae8bfbd05b92abd309766f4da9a7ea26c2d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Factor out code to clear all mappings into
QFSFileEnginePrivate::unmapAll() and call that
from QTemporaryFile.
Task-number: QTBUG-39976
Change-Id: Ic1ceeba0ba4451866f1081fee430e5c458c0819d
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
So far, we had to listen to the QObject::destroyed signal from the QScreen
class to figure out whether a screen was removed. Often, this is already
too late, given that most of the QWindows have been moved by then and we
don't get to react before the windows are being set to the primary screen.
This patch introduces a new signal that will notify about a screen removal
before the screen is started to be destroyed, so that the application gets
to decide what to do with the screens before Qt decides to move things around.
[ChangeLog][QtGui][QGuiApplication] Added QGuiApplication::screenRemoved
signal to inform that a screen has been removed, before Qt reacts to it.
Change-Id: I99304179f4d345cae581a87baac6cff7b8773dea
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
There is no guarantee that the OES extension is present and the standard
functions are not required to be dynamically resolvable on ES.
By performing the ARB-style lookup for the suffixless function names we
can also support ES3 compatible contexts on desktop GL.
This also fixes the problem of picking up the APPLE extension functions
instead of ARB when both are available. vaoFuncsType was set to ARB correctly
but the helper has to take the preference of ARB into account too.
Task-number: QTBUG-38168
Change-Id: If7402320e8f96891017674f3c43bc57c4b5d29f3
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
The assumption that we can test "en_US" and expect
it to behave a certain way is flawed in that most
of the formatting settings are independently
configurable by the end user.
Make the test more robust while attempting to preserve
as much testing as possible:
Make the decimalPoint/groupSeparator tests check for
a range of possible values. Check that they are not
the same.
Remove the date formatting tests and the firstDayOfWeek()
== Sunday test.
Make the time zone test accept a non zero extended
time zone. ("GMT+2" in addition to "GMT+02".)
Change-Id: Ie1f89793eb785f526c5f6fafbb6726ef8c6cb016
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Fixed qwidget test cases for platforms that show windows full screen by
default and that don't support WindowMasks. Incorporated QNX/BlackBerry
peculiarities.
Change-Id: I349ecab5cef35c7d9751aa547465f685d620164a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
The combination of these unstable tests makes it very
hard to get changes through the CI system due to the
unrelated test failures.
Skip the following test functions:
tst_QIODevice::unget QTBUG-39983 (Mac)
tst_QThreadPool:expiryTimeoutRace QTBUG-3786 (Windows)
tst_QLocalSocket::processConnection QTBUG-39986 (Mac)
tst_QTcpServer::adressReusable QTBUG-39985 (Linux)
Change-Id: I96559bea0d437fd25966b6ccac1ece1490e06241
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
This allows QQuickSystemPalette to listen to palette changes without
installing an expensive event filter on the application object.
Change-Id: I8b693e047d993c444e393d7a714a5709692c3560
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The setting of (static) messageHandler to qDefaultMessageHandler if null
was happening in multiple threads simultaneously, so it needs synchronization.
Used an atomic pointer in case qInstallMessageHandler is called from a thread,
but more importantly, initialized the static vars right away.
Improve auto test to ensure that qInstallMessageHandler(0) still sets the
default message handler.
Change-Id: I70335af38c1d28a1cdba1df8a79c6006f227422e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
mkspecs/qnx-x86-qcc/qplatformdefs.h
src/corelib/global/qglobal.h
src/network/socket/qnativesocketengine_winrt.cpp
src/plugins/platforms/android/androidjniaccessibility.cpp
src/plugins/platforms/windows/qwindowswindow.cpp
Manually adjusted:
mkspecs/qnx-armle-v7-qcc/qplatformdefs.h
to include 9ce697f2d5
Thanks goes to Sergio for the qnx mkspecs adjustments.
Change-Id: I53b1fd6bc5bc884e5ee2c2b84975f58171a1cb8e
The sockaddr_in struct is defined in netinet/in.h header.
Change-Id: I67a3421094c96a5e948968a26723ec8c21f85c93
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The almostplugin has an unresolved symbol, and on Android
we compile with -no-undefined.
Change-Id: Ia631193890dfe8e7ac8e58087475164222d876fc
Reviewed-by: BogDan Vatra <bogdan@kde.org>
It enables you to get a valid QSharedPointer instance to 'this',
when all you have is 'this'.
Task-number: QTBUG-7287
Change-Id: I3ed1c9c4d6b110fe02302312cc3c4a75e9d95a0c
Reviewed-by: Richard J. Moore <rich@kde.org>
Use SetWindowPlacement() to set the normal position when applicable
as is done in Qt 4.
Task-number: QTBUG-39544
Change-Id: Ia158b968ea15361d9937619f07b56eb8a0312a13
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
This macro is equivalent to arg.toUtf8().constData().
It is usable for "%s" arguments of qDebug(), qWarning(), qFatal(),
qCritical().
Change-Id: I2d9956e6651271e1e2183dce9c835511cf923bf3
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows us to quickly test if a compiler actually supports what it
claims to support.
Change-Id: Ia32212a11774aa7947ddffae30837c53665374f3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Improve consistency and use QTextDocument functions to find ranges
instead of coming up with our own scheme. This is important since
QCursor's char format depends on block positions.
Change-Id: I94eb137882dc6b5f7b01fa7693b4a536cc48d02a
Reviewed-by: Pierre Rossi <pierre.rossi@gmail.com>
It is needed to control a QStateMachine object from QML.
Change-Id: I19271d97718af2d688c477647d6341f70fdef3ea
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
Qtbase contains four identical implementations of next power of two,
these should be shared and the implementation made available to other
qt modules, as it is also used many places outside of qtbase.
[ChangeLog][QtCore][QtMath] Introduced qNextPowerOfTwo methods.
Change-Id: Id23fbe5ad6bae647b30d5a4212c0330e48a50278
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add conversion methods similar to those in QString to QByteArray. This
is often more useful than the QString version since std::string like
QByteArray are byte arrays.
[ChangeLog][QtCore][QByteArray] Added convenience methods to convert
directly to and from std::string.
Change-Id: I92c29d4bb1d9e06a667dd9cdd936970e2d272006
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Instead of using std::thread, use the WinRT ThreadPool to manage
threads. This allows for setting the scheduling priority, and provides
a path to enable XAML integration (which requires Qt run on a background
thread).
QThread::terminate() is still unsupported, and only the winmain thread
can be adopted due to the behavior of the thread pool when creating
tasks from the GUI thread. The associated tests are now skipped, and
all other QThread tests pass.
Task-number: QTBUG-31397
Change-Id: Ib512a328412e1dffecdc836bc39de3ccd37afa13
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Forward canDropMimeData() and dropMimeData() to the source model.
[ChangeLog][QtCore][QAbstractProxyModel] QAbstractProxyModel now
forwards the drop-related API.
Task-number: QTBUG-39549
Change-Id: Ib81fcec862586e4ecfb99b9e0f4eb1a16eace762
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
In "setOpaqueResizeAndMove" this patch makes sure that the content of a subwindow
actually fits into the window, otherwise the resize does not work properly.
The content is dpi dependent and thus the pixel size of it increases with the display
dpi value.
Furthermore when moving the QMdiSubwindow this patch makes sure that we actually grab
the window's header and not one of it's tool buttons (minimize, maximize, close).
Change-Id: I88314994957c5883f57c09c9240a3b83f1ee42ed
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
This allows QQuickApplication to listen to layout direction changes
without installing an expensive event filter on the application object.
Change-Id: I2d7d8906acecbc092657c4bd918bbdc9aad9744c
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Fix condition to allow return a valid pointer when head != 0.
Change-Id: I5215f7dfc44924016c2d9b67ab2d9935b5164d7a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We were keeping a dangling pointer to a non-existent QIODevice around
which would lead to a crash.
Task-number: QTBUG-17400
Change-Id: Ie374cbb94bb45c9b0fbef46287b3317f60154123
Reviewed-by: Richard J. Moore <rich@kde.org>
The local files in availableSizes() were not resolved.
Introduce member variables for the file names, resolve them
in the constructor and add initTestCase() to verify.
Task-number: QTBUG-39287
Change-Id: If841e904700fe76b6c9265124ccba7764911fdc9
Reviewed-by: aavit <eirik.aavitsland@digia.com>
setEnabled() would race with isEnabled()/isDebugEnabled()/etc.
Change-Id: I2004cba81d5417a634b97f5c2f98d3a4ab71770d
Reviewed-by: David Faure <david.faure@kdab.com>
According to the spec rects get returned with iiii but we were directly
serializing QRect resulting in (iiii) as signature.
This would trip up Orca when trying to use flat review in text edits.
Task-number: QTBUG-39702
Change-Id: I8d6769688586e678d27cc4341de5176a91f057fc
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
QImage::fill(uint) was incorrectly performing ARGB->RGBA conversion when
called on RGBA8888 formated images.
This patch moves the color conversion to QImage::fill(QColor) where it
belongs so that fill(uint) can behave consistent with documentation and
how it treats other formats.
The fill(uint) method had no automated tests, and this patch adds one.
[ChangeLog][QtGui][QImage] QImage::fill(uint) now fills the given pixel
value unconverted when used on RGBA8888 image, making it consistent with
the documentation and treatment of all other image formats.
Change-Id: I00a9d810c61d350dbdd7c4b9ad09e5ce11896b6d
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
If the widget exists in the style rules cache before it polishes for the
first time then it should be removed from styleSheetCache too so that the
latest set stylesheet is used for the polishing.
Task-number: QTBUG-39427
Change-Id: Ic1e7988afe530f16ea9996bae56543ed554d6be9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This reverts commit a1c5198387.
The idea of detecting non-spontaneous events by comparing
against the widget's crect has problems when sequences
of programmatic resizes occur. In addition, QWindowSystemInterface's
queueing of events is problematic for this.
Task-number: QTBUG-39611
Task-number: QTBUG-32590
Change-Id: I4674d8d5d5d432d938f7226b5790543335665c1f
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Currently QJsonValue and QJsonValueRef behave differently in
regard to the default values leading to confusion compile errors
depending on which of the two types one is actually using. Before
this change it was possible to write:
QJsonValue value = jsonObject["item"];
QString name = value.toString(QStringLiteral("default"));
but not:
QString name = jsonObject["item"].toString(QStringLiteral("default"));
Change-Id: Id1185acf339aa3a91e97848e85d068f84552df71
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
On Unix systems where the GUI event dispatcher uses a notification
system for socket notifiers that is out of band compared to select(),
it's possible for the QSocketNotifier to activate after the pipe has
been read from. When that happened, the ioctl(2) call with FIONREAD
might return 0 bytes available, which we interpreted to mean EOF.
Instead of doing that, always try to read at least one byte and examine
the returned byte count from read(2). If it returns 0, that's a real
EOF; if it returns -1 EWOULDBLOCK, we simply ignore the situation.
That's the case on OS X: the Cocoa event dispatcher uses CFSocket to get
notifications and those use kevent (and, apparently, an auxiliary
thread) instead of an in-thread select() or poll(). That means the event
loop would activate the QSocketNotifier even though there is nothing to
be read.
Task-number: QTBUG-39488
Change-Id: I1a58b5b1db7a47034fb36a78a005ebff96290efb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In ICU the strength parameter decides whether a comparison is
case sensitive or not.
Fix mac comparison code. It can't have worked before.
Added some basic automated testing for QCollator.
Change-Id: I2646c464fd22ccd3a93c461fa3dba4bd1d4c7b4b
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
It is NOT always the same as isEnabled().
Added a unittest to prove it.
Change-Id: I7717126835923e8c091249bfcdf81767c44fb5f7
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The previous implementation used [NSApp orderedWindows]
which does not return NSPanel subclasses, which is
used by Qt dialogs and pops.
Use [NSWidow windowNumberAtPoint:belowWindowWithWindowNumber]
instead, which hit-tests on all window types. This
can potentially include windows from other processes
and non-Qt windows which needs to be filtered out.
Add EXPECT_FAIL to tst_MacGui::nonModalOrder. The
correct topLevelAt() implementation now exposes that
this test is failing.
Task-number: QTBUG-39322
Change-Id: I81afa3da964e08fe682802220d8fe81e9284205e
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
When navigating with the directional keys or tab/backtab, there are
certain situations where the cell that is edited is incorrect.
For example, consider the table below.
'^' represents the starting cell and the direction of navigation.
'c' represents the index that is arrived at as the currentIndex prior to this patch as
reported by view.selectionModel()->currentIndex().
'x' is the cell that should be edited:
+---+---+---+---+
| | | e | |
+---+---+---+---+
| | x | |
+---+ +---+
| | c | |
+---+---+---+---+
| | | ^ | |
+---+---+---+---+
Before this patch, the cell that will actually be edited is c, rather
than x, so after editing the cell and pressing enter, the previous
contents of the cell will still be shown.
With this patch, currentIndex() will be changed after every call to
cursorMove(). Navigation into and out of cells is not affected because
the visualCursor member in the QTableViewPrivate tracks the keyboard
navigation entry point. If after the up navigation into the span, the
user presses up, the cell entered is 'e', not the cell above 'x'.
Task-number: QTBUG-29239
[ChangeLog][QtWidgets][QTableView][QTableWidget] currentIndex() now
reflects the top left cell when in a span.
Change-Id: I3dc3db46ebba340102860fc4ad98fcaf91484983
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Traditionally, RCC in "C mode" was meant to bundle small resources into
a binary, like help texts or an occasional icon. RCC produces a .cpp
file containing the actual data in a char array which is then passed
to the compiler and linker as a normal source file. Larger resources
should be compiled in RCC's binary mode and loaded at run time.
Current Qt Quick use tries to deploy large hunks of data in "C mode",
causing heavy compiler/system load.
This patch works around the issue by splitting the process into
three parts:
1. Create a C++ skeleton, as usual, but use a placeholder array
with "easily compilable" (mostly NULs) data instead.
2. Compile the skeleton file.
3. Replace the placeholder data with the real binary data.
time (qmake5 ; make clean ; make) takes 1.3 s real time for a
100 MB resource here, and there is still room for improving patching
performance if really needed.
Change-Id: I10a1645fd86a95a7d5663c89e19b05cb3b43ed1b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
QWidget::resize() or QWidget::move() set the new size/position values
and send events. The spontaneous events generated by the platform
should be ignored in that case.
Task-number: QTBUG-30744
Task-number: QTBUG-38768
Task-number: QTBUG-32590
Change-Id: I9c0ae38842ed76a8a88ca64fdc9bbe106b2766b7
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
This simple patch was an unfortunate victim of the Gitorious to
Gerrit transition. (https://qt.gitorious.org/qt/qt/merge_requests/1179)
As noted in the Gitorious review, a small bug in readHeader is also fixed: ||
instead of &&.
Done-with: Pali Rohár
Task-number: QTBUG-12684
Change-Id: I1fe16359b9b68c10e518904c6a5c58b00fb7379b
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
Some codecs can't handle the range outside ascii properly and would then
fail to read the data back in correctly.
Task-number: QTBUG-15543
Change-Id: I4c02921e787a939eeec0c7a11603b5896d756aef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Store the value of QMessageBoxPrivate::autoAddOkButton
temporarily when automatically adding the "Show Details..."
button.
Task-number: QTBUG-39334
Change-Id: I173c83893548ee83b3d8ea2743f87686c32657e7
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
If QNX does not have inotify there is no native engine.
Change-Id: I042efd0b59f916f9e0b55bbe5c7f3fe7bb6914c8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
The selectable/selected states refer to items in a list and similar,
do not interpret them as text selection states.
Without this change NVDA for example announces text edits as selected
which makes no sense and which it doesn't do for native text items.
Change-Id: Ib1d109523bd4cc2b9b40ace8a8c3d7d3a7f9f25c
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
[ChangeLog][QtCore][QSaveFile] Now follows symbolic links while writing to
a link instead of replacing the link with the contents.
Change-Id: I5afd519cb9f96ae68fa4c23c33a18de75671a301
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Qt5 allows QAIM subclasses to reimplement the sibling() method. Unfortunately,
the default QAbstractProxyModel's reimplementation differs in behavior to what
the Qt4 version was doing. In particular, the Qt4 version used to use the row
and column as positions within the proxy model, while the Qt5 version mistakenly
does this at the level of source model. This is arguably broken; the caller asks
for a sibling of the proxy index, not for a sibling within the proxy model.
This change makes the QAPM::sibling work explicitly in the same way as the Qt4
code behaved.
The reimplementation of QAbstractProxyModel::sibling was introduced in
9dfba89c28. It was subsequently fixed with commit
999109866d not to return indexes from the source
model, but the logic was still different from the Qt4 version.
[ChangeLog][QtCore][QAbstractProxyModel] Fixed QAbstractProxyModel::sibling to
work in the same manner as the Qt4 code used to behave. Previously, Qt5's
implementation would treat the row and column as positions in the source model
instead of a position in the proxy itself.
Followup-to 9dfba89c28 and
999109866d
Change-Id: Ia25027b2ad9e4777ba28de2d2226d48f8cccf587
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The sanity check added in d16508a285
didn't actually catch the case where the invalid data is large
enough to contain the offset table and table directory. Added sanity
checks to all the code that accesses the font data now, so this
should fix crashes with partial data as well as invalid data.
Task-number: QTBUG-37190
Change-Id: Ie43f10d8cf0b09007783b9b1c4d91bfed8c6b0f0
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This brings QTimer::singleShot on par with QObject::connect in
terms of the new Qt5 syntax. With this patch, it is now possible
to connect singleShot to a member pointer, a static function
pointer and a functor (with or without a context object).
The short code path for 0 msec is not yet implemented - it will
require further modifications to QMetaObject before it will be.
An additional SFINAE on the new singleShot overloads had to be
implemented to prevent tricking the compiler into believing
const char * might be a function pointer.
[ChangeLog][QtCore][QTimer] Implemented new style connect syntax,
including functors, in QTimer::singleShot
Task-number: QTBUG-26406
Change-Id: I31b2fa2c8369648030ec80b12e3ae10b92eb28b4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
beginModalSessionForWindow will center the window and ignore
the set geometry. So to workaround this it checks the new value
against the old one and moves it back if need be.
Change-Id: I38bc74c04138992f2e0570fca666414025aeeba8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
