It's new in Qt 6 after the type registration changes.
Task-number: QTBUG-82922
Change-Id: Id4aa22e50a8d84736688dbf2ab51e12a116177f0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
isNull() would forward to the contained type and check that type's
isNull() method for some of the builtin types. Remove that behavior
and only return true in isNull(), if the variant is invalid, doesn't
contain data or contains a null pointer.
In addition, implement more consistent behavior when constructing
a QVariant using the internal API taking a copy from a void *.
isNull() should return true in both cases. This mainly changes behavior
for some corner cases and when using our internal API.
[ChangeLog][Important Behavior Changes] QVariant::isNull()
no longer returns true when the variant contains an object of some
type with an isNull() method, that returns true for the object;
QVariant::isNull() now only returns true when the variant contains
no object or a null pointer.
Change-Id: I3125041c4f8f8618a04aa375aa0a56b19c02dcf5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Comparing two variants will not try to convert the types
of the variant anymore. Exceptions are when both types are
numeric types or one type is numeric and the other one a
QString. The exceptions are there to keep compatibility with
C++ and to not completely break QSettings (which needs automatic
conversions from QString to numeric types).
[ChangeLog][Important Behavior Changes] Comparing two
variants in Qt 6 will not try attempt any type conversions before
comparing the variants anymore. Instead variants of different type
will not compare equal, with two exceptions: If both types are numeric
types they will get compared according to C++ type promotion rules. If
one type is a QString and the other type a numeric type, a conversion
from the string to the numeric tpye will be attempted.
Fixes: QTBUG-84636
Change-Id: I0cdd0b7259a525a41679fb6761f1e37e1d5b257f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the compare method in the QVariant::Handler struct. Rely
on the generic support provided by QMetaType instead.
[ChangeLog][Important Behavior Changes][QVariant] QVariant will now use builtin support in
QMetaType to compare its content. This implies a behavioral change
for some graphical types like QPixmap, QImage and QIcon that will
never compare equal in Qt 6 (as they do not have a comparison
operator).
Change-Id: I30a6e7116c89124d11ed9052537cecc23f78116e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The paintSection was very long and thus difficult to override.
This change makes it far more easy to do custom section painting
or styling in the headerview.
[ChangeLog][QtWidgets][QHeaderView] Introduced QHeaderView::initStyleOptionForIndex
to make it easier to reimplement custom styling and painting of sections.
Change-Id: I99e5fe8d70485a4650ab33e3d3eb4a46d6468326
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Change-Id: Ibdc95e9af7bd456a94ecfffd16066c47ea9766d0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If the file system already stores a QFileInfo, then it will have the
information cached, which avoids costly roundtrips to the file system.
Task-number: QTBUG-41373
Change-Id: I830a39fe0e20ebf07abde4438a87f7572f608d66
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The mapping between model indexes, QUrl, and QDir in QFileDialog
resulted in QFileSystemEngine methods being called on empty
strings, which results in a warning from QFileSystemEngine.
When QFileDialog gets an empty string as the new path, then we
know that it's the "My Computer" location, so handle that case
separately. This makes sure we don't call any QFileSystemEngine
methods with an empty string.
Change-Id: I421d3d76b053379c216c41a72fb783d1bad176cb
Pick-to: 5.15
Fixes: QTBUG-67866
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When opening a QFileDialog with an initial directory that lives on a
disconnected network drive, repeatedly testing that directory consumes
a significant amount of time during which the UI is blocked.
To reduce the amount of file accesses, refactor the initialization code
to allow sharing of a QFileInfo for the default case of operating on a
local and absolute file system. This reduces the amount of stat calls
significantly during startup time, and in case of a disconnected
network shaves of 10-15 seconds of blocked UI, if Windows has already
noticed that the file system is disconnected.
Pick-to: 5.15
Fixes: QTBUG-6039
Change-Id: Ie082e447db214033291455bef2087cd05f366806
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Only widgets is required here, so drop the dependency on QT_BUILD_PARTS
and just depend on widgets.
Pick-to: 5.15
Change-Id: Idaae547b69ffd91681900b33c73e4a341011c30c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This automatically sets the CMake Generator to be the same as the one
used for qtbase.
Change-Id: If9e1a6942520417393055c572f0d892efca43d2e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Apparently CMake encods targets from different scopes with a different
encoding scheme for earlier CMake versions.
CMake 3.16.3: Threads::Threads::@<0x5604cb3f6b50>
CMake 3.18.0: ::@(0x5604cb3f6b50);Threads::Threads;::@
Handle the earlier version approach as well. It needs to be done both
when writing out 3rd party dependencies, as well as for lib prl files.
Possibly in more places as well, but I didn't detect additional
places yet.
Amends 92ee9bd6b8
Task-number: QTBUG-85801
Task-number: QTBUG-85877
Change-Id: Ib348b51b2d623fb50d9080dba2beeb931d47a69c
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
pthread has been removed from the NDK and the cxx11_feature detection
fails.
Fixes: QTBUG-72330
Change-Id: I22a97814b7e95011ad3944327f02343348c72b91
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
and once I touch these lines anyways, either add noexcept ;)
Fixes-up 8bdbb7f226
Change-Id: Ibfaedcff82c041293220408ab7ae739b3cbd2a4f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
It's not immediately obvious that you need to use
all underscores for the feature name, so add a
line that explaines it.
Change-Id: I508eaf909c808fb0a93442f6e71428c18559b965
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We expose it in the private QtBuildInternals package, but we need it
also as public information for consumption in qt_import_qml_plugins()
to decide whether it should do anything.
Change-Id: If135ae596b4edaf8e2c458f6a2518b968c6d01c4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
For qt_import_qml_plugins to work, it needs to have access to the Qml
plugin targets by the time find_package(Qt6Qml) is called.
To do that, we modify the generation of Qml plugin Config, Targets and
Dependencies files to go into a special 'QmlPlugins' subfolder of the
Qml package.
The Qml package will then GLOB include all the Config files in that
folder, to make them available whenever find_package(Qt6Qml) is
called.
This is similar to how the Qt plugins were glob included in the CMake
integration of Qt 5.15. In fact that glob including is missing in Qt 6
for regular Qt plugins, and should be implemented in a following
change. Currently the Qt Plugins config files that are included are
hardcoded to the list of known plugins at Qt configuration time.
As a drive-by to make this all work, the naming of the various Config
and Dependencies files has been normalized to include the Qt6 prefix.
This is done for both regular Qt plugins and Qml plugins.
Task-number: QTBUG-85961
Change-Id: Id20da72337ca2945fa330ea6fb43535e44a83292
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Resizing it to 0 will cause it to allocate memory. This will then
cause append() to copy the data from the other string instead of
using copy on write.
Task-number: oss-fuzz-24347
Pick-to: 5.12 5.15
Change-Id: I581bd109f9b973e1c70b7b41b1f610a2ad5725b8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They were only used by one function each, in unicodetables.cpp, so
don't need to be macros.
Change-Id: I3e7f9f661568862d0a0d265bb8f657a8e0782b13
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In that case we haven't created the h2 handler yet, so it will
crash when trying to access various members.
Task-number: QTBUG-85902
Change-Id: Id0699ff06ef67748a16622703f731db0b0867771
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Remove unused argument and use default contructor for the flags.
Change-Id: I09d319bc58199ed713333055a2fdd519c249f831
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
Use the new QWSI APIs that take a registered input device.
Task-number: QTBUG-85852
Change-Id: Iefb8239a60ff819172ba64f35f120cdc6975257f
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Before the introduction of QDecompressHelper gzip was preferred over
deflate. The change seems to be accidental. Amends commit
7b76379a89.
Change-Id: I70f33d551912465d63f49ea3db1ac3575d19a92d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The earlier limit set on the curve threshold turned out to be too
strict, leading to visibly bad rendering in reasonable use cases.
Ref. 5322998a0b
As a drive-by, add a missing fixed-to-real conversion. (This is a
no-op in a default build, where qfixed==qreal.)
Fixes: QTBUG-85193
Pick-to: 5.15 5.12
Change-Id: I7cc3543d7aa4e90643b275686372400879decef2
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
We don't have this class in Qt anymore.
Drop the related snippet as well.
Pick-to: 5.15
Change-Id: I5149e2f9da483b9ad678a6d414a278cb7e107f10
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Since Interbase/Firebird has a limit for column and table names then
this function can be used by QSqlRelationalTableModel to make sure that
the aliases created are within that limit.
Change-Id: I0cb1c65b34befcb3690ccad3f081556dd2691344
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
[ChangeLog][QtCore][QJsonDocument] Fixed a bug that caused
QJsonDocument's equality operator to crash if one of the operands was
default-constructed and the other wasn't.
Pick-to: 5.15
Fixes: QTBUG-85969
Change-Id: I5e00996d7f4b4a10bc98fffd1629f835f570ef6b
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
This follows up on commit 580e9eedf783ccbdcb67baa3d1a9dcdd53922f86; if
the allowed range is narrower than some time interval whose end it
straddles, users can only access the later part of the range if
keyboard tracking is disabled.
Pick-to: 5.15
Task-number: QTBUG-65
Change-Id: Ie8882bd65bda603133abaa82ad83eb1cdd91f175
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
QIODevice::skip() called a virtual QIODevicePrivate::skip() to
implement an efficient skipping on I/O devices for the internal
subclasses. The user subclasses cannot inherit QIODevicePrivate, so
this functionality was not externally accessible.
This patch replaces QIODevicePrivate::skip() with a virtual protected
QIODevice::skipData(). While the basic implementation simply discards
the data by reading into a dummy buffer, users can reimplement this
function to improve the performance in their subclasses.
[ChangeLog][QtCore][QIODevice] Added virtual protected skipData().
Now, subclasses can implement device-specific skipping of data.
Change-Id: I9522f7f7ab9d03ac06e972a525f8ec2fa909a617
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We only support version 4 and 5 in Qt 6.0. 1 and 2 are already gone
(due to being based on binary JSON), now we remove 3 as well.
Task-number: QTBUG-81346
Change-Id: I3627dcc0587f1e36f11e93edf7172889e911d64e
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Use the actual minimum value, rather than minus the maximum, and adapt
the overflow expectations so that they're correct west of Greenwich as
well as east.
Change-Id: I7a5f4510db0fdea3855b5b2bd4c4a86882030efd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Due to a limitation of mktime(), we would have declared it invalid.
Tidied up qt_mktime() slightly in the process.
Change-Id: I25469e314afee6e0394e564bc69a98883005d4ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Petty tidy-up, narrowing the scopes and asserting that localtime_r()'s
return, when non-null, is the pointer we gave it.
Change-Id: I6c0959524260028ca9b234f6d33eae78f27c1412
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The ResizeObserver API is now available on the major
desktop browsers (Safari, Chrome, Firefox), and can
be used to handle canvas resize.
(Previously, we got a callback on viewport resize
only)
Pick-to: 5.15
Change-Id: I8737285416bef70641f90da793c85efcb24f3623
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
For long double: they're just missing, so add them for completeness.
For integral types: follow the advice of C11's trigonometric
functions; first convert the angle to double, then do the actual
conversion. This is offered only for the degree->radians conversions,
as someone may legitimately want to call e.g. qDegreesToRadians(90).
On the other hand, it seems extremely unlikely that someone may
want to do a radians->degree conversion starting from integral
datatypes, so I'm not adding it for the moment being (instead,
I'm leaving a note).
[ChangeLog][QtCore][QtMath] qDegreesToRadians now also accepts
long double and integral types. A value of integral type will be
casted to double before the conversion to radians.
[ChangeLog][QtCore][QtMath] qRadiansToDegrees now also accepts
long double.
Change-Id: Ib1576be5193ae09bb6cb4a70d7a31702955df2c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Interbase is case sensitive when tables/fields are escaped so we should
ensure that we pass the value as is.
Pick-to: 5.15
Change-Id: Ia6c4edc9c1e675bd95913c85d47bf22c418d2113
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We can provide those. They don't lose information, do not have the
problem we face at offering ranged constructors (namely the order of
duplicate keys), and have a distinct advantage over ranged constructors:
a non-shared rvalue QMap can be "upgraded" to a QMultiMap without
allocating memory for the multimap.
Change-Id: Ic23c83927c05a210bc1f0050006c9f26365d3916
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Forcing the reading of all file system attributes is generally useful in
multi-threaded applications, and has at least one more use case in Qt.
Using it in QFileSystemWatcher on Windows avoids several file system
accesses.
Task-number: QTBUG-41373
Change-Id: Ib3c3243fd083142393ad46d62f49cb4f7bfda17c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We use qt_wrap_cpp instead of AUTOMOC so that we can easily find the
json files.
Getting autorcc to run only after json file has been generated was
deemed too tricky. Therefore the test is slightly modified to check for
the json files in its directory instead of the resource, if the qrc file
does not exist.
Change-Id: Id1aabb117c8bab3ff81156da1f66d64e796bf18b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This adds supports for setting and retrieving the selected
MIME and name filter for 'QXdgDesktopPortalFileDialog'.
For preselecting a filter [1]:
> current_filter (sa(us))
>
> Request that this filter be set by default at dialog creation. If
> the filters list is nonempty, it should match a filter in the list
> to set the default filter from the list. Alternatively, it may be
> specified when the list is empty to apply the filter
> unconditionally.
The "current_filter" return value was added in xdg-desktop-portal
commit [2].
[1] https://flatpak.github.io/xdg-desktop-portal/portal-docs.html#gdbus-org.freedesktop.portal.FileChooser
[2] 35fca7fae8
Fixes: QTBUG-85658
Pick-to: 5.15
Change-Id: I8651c1a8942dfd358895b7826730729c4d22e680
Reviewed-by: Jan Grulich <jgrulich@redhat.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Embed package versions into the qt_find_package calls for various
Linux specific packages.
Task-number: QTBUG-82917
Change-Id: I5d1cb623f81932dfae4658b8a3a89eedb71ea3af
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If certain 3rd party libraries have a version that's not suitable for
Qt, the configure summary should say so, rather than use them and fail
at build time.
With the current situation, we have to duplicate the version
information from the configure.json files in helper.py, by assigning
the version number as an extra find_package variable.
Rerunning configurejson2cmake then embeds this version info into the
qt_find_package calls in configure.cmake.
Some of the Find modules are rewritten to take the specified version
into account when looking for the libraries.
This involves moving around the code for creating a target, after
calling find_package_handle_standard_args() so we know if a good
enough version was found.
Task-number: QTBUG-82917
Change-Id: I139748d8090e0630cda413362760034dc3483e11
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The comparisons with pointer were ambiguous as the comparisons could
be done between iterators or pointers.
Change-Id: I0484946931502d04bd63519fcd6e886c732758d3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
