When creating the statements, it is now possible to pass a list of
enabled layer names. Every node or edge which is not in the list of
enabled layers will be pruned from the graph prior to traversal. Note
that an empty layer list for a node or an edge means it is on all
layers.
Change-Id: I61a4df7d395b4beb42ee55ce08fef8ebe04263c9
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
In particular, go through QMetaType/QMetaEnum to deal with enums.
Change-Id: I2e847ba328eb46609b86b3dfd6c4dbf532d78b7d
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
In particular, go through QMetaType/QMetaEnum to deal with enums.
Change-Id: Idbe16c913c1d471a4a91d219f77876e498c192d9
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This is a new namespace with helper enums to have richer parameters
available to QShaderNode. Will be used in further commits.
Change-Id: I9a61481c1e89ddd08327211e90eeabf0172c3b7a
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Availability of D3D11_QUERY_DATA_TIMESTAMP_DISJOINT depends on the used
MinGW version so that the check for MINGW is not sufficient. The newly
added configure test can be used for every toolset.
Task-number: QTBUG-57916
Change-Id: Ia9cb48f3e673841101a93cbc8ea23aff9547f639
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
only few tests remain, and many of these were mis-classified anyway.
Change-Id: Ic3bc96928a0c79fe77b9ec10e6508d4822f18df2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We're adding a lot of unnecessary files that end up later as cargo-cult,
for at most a handful of lines. So instead move the testcases directly
into the .json file.
The following sources were not inlined, because multiple tests share
them, and the inlining infra does not support that (yet):
- avx512
- openssl
- gnu-libiconv/sun-libiconv (there is also a command line option to
select the exact variant, which makes it hard/impossible to properly
coalesce the library sources)
The following sources were not inlined because of "complications":
- verifyspec contains a lengthy function in the project file
- stl contains lots of code in the source file
- xlocalescanprint includes a private header from the source tree via a
relative path, which we can't do, as the test's physical location is
variable.
- corewlan uses objective c++, which the inline system doesn't support
reduce_relocs and reduce_exports now create libraries with main(), which
is weird enough, but doesn't hurt.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change-Id: Ic3a088f9f08a4fd7ae91fffd14ce8a262021cca0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
testing the non-xkb xcb parts is unnecessary, as we already did that
separately.
Change-Id: I452cc746315117a0169f0e0c764fe7e0229437e9
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
just use 'which' and be done with it. the script was rather arcane, and
worked around deficiencies of cygwin (no longer relevant) and solaris
(assumed to be somewhat sane meanwhile).
Change-Id: I2e11ea3c87ac06a85604ac8d58d8fee95eae2e15
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
replace the custom QT_NO_STD_ATOMIC64 with a regular public feature, and
give libatomic an empty source rather than using a separate config test.
Change-Id: Iaf4a7f4c4874f61bf93aa58fe41843a86baf1ab7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
libraries::journald is the actually used one.
Change-Id: I2da4ae106dd1041cdb269e05def93523ed5011b2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
remove useless define and ifdef/error, and check for a more appropriate
function.
Change-Id: I1a1622cc157c49ebb6787068ade7b33e45e228ca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
these would be caught by the central verifyspec test, if we even got
that far.
Change-Id: I3eda80c4614b94f869d907f0a40166f4914ea692
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- #error hack for MIPSpro compiler from unix/clock-*
- irix exclusions from unix/*iconv
- hpux defines from unix/{getifaddrs,ipv6ifname} (the obsolete
hpuxi-g++-64 spec would add them automatically anyway)
Change-Id: Ib227e5626c0e8c8f6faebf76c312d77955f80b92
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
amends b4525b3407, which gives no indication for why this was done.
judging by other tests, it wasn't cargo-culted. i presume it was just
about disabling debug-and-release, and the debug choice was arbitrary.
the central system nowadays does the same, just that it uses release.
amends 1533bfc5fc, which certainly _was_ cargo-culted from the former.
as a side effect, this removes some other CONFIG manipulations which are
handled centrally or are wholly ineffective nowadays.
Change-Id: Ib9af2837925a2f19af05506e798a26d363635735
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
in the gles tests, use #ifdef __APPLE__ directly instead of defining
BUILD_ON_MAC. this is consistent with the desktop gl test, less magic,
and corresponds with the later usage (which does #ifdef Q_OS_MAC).
amends f3d82a89.
in the desktop gl test, clean out the dead Q_OS_MAC define from the
project file (added in 45dc5852 concurrently to the more direct fix in
864815ef).
Change-Id: Ieebad3c7e87218b887f61485c331b93eadfcf406
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
CID 11161 (#1 of 1): Missing break in switch (MISSING_BREAK)
unterminated_case: The case for value Qt::BottomToolBarArea is not terminated by a 'break' statement.
Coverity-Id: 11161
Change-Id: Ie254d0339e41a58004632e9997febac4a1ab4edd
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
The coordinates need to be representable in signed 16-bit not unsigned.
Task-number: QTBUG-62251
Change-Id: I1d4aaa2fb90b8f428380277d5b4e416a4672ee6a
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Commit 9e64fc9e1c caused a regression
which stored all QDateTime entries as if they were in localtime,
which causes them to be offset by the amount of local timezone
offset. This is fixed by adding "Z" if the time should be in UTC or
using "+/-hh:mm" if it should use fixed UTC offset or specific
timezone.
Task-number: QTBUG-57138
Change-Id: Ie60905dfb3a517db442b636ca41daf8348753d84
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
For clang -Os is very similar to -O2 and doesn't really reduce size much.
-Oz is usually what you want to use with clang for code reduction.
Now clang binaries are only 9% bigger than gcc's, instead of 22%.
Change-Id: Ib0ba560be26db68aeb21c13df4b151b7fbd81431
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This is shown in the file properties, and in crash dialogs.
Task-number: QTBUG-61970
Change-Id: Icf12fabb7fad30638c4e94c8ea8729c9106d01d9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
If ibus has been set, but either isn't installed or doesn't launch, all
composition fails on xcb. This ensures we fallback to "compose" which
is needed for working composition on XCB.
Change-Id: Ic2061c330bcb907759a13920c3eede14f3036563
Reviewed-by: René J.V. Bertin <rjvbertin@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts 2bc619c30e, which tried to
fix an unspecified problem by regarding all fonts with EBDT tables as
potential bitmap fonts. The change log does not have any reference to
a bug report or a problematic font. It also singled out Windows and GDI
as the only font engine where this was necessary, which caused difference
in behavior between different platforms, and even a difference in
behavior on Windows when setting the hinting preference or turning on
high-DPI scaling.
The fact is that any font may have an EBDT table, and Microsoft has this
for the smaller pixel sizes of many of their default fonts, e.g. Calibri.
The result was that Qt would detect these as bitmap fonts and refuse to
use distance field rendering for them.
If there are fonts where it is a real problem that some glyphs only exist
as bitmaps, we first need to know about them. Then we need to find some
other solution than a blanket blacklist of all fonts with EBDT tables.
For instance, we could separate the bitmap glyphs into their own QGlyphRuns
and use native rendering only for those specific glyphs.
[ChangeLog][Windows][Fonts] Some key fonts, such as Calibri, were being
detected as bitmap fonts and not rendered correctly in Qt Quick. This has
now been fixed.
Task-number: QTBUG-62176
Change-Id: If892390cc74f180c5df9ef80484ba2eb0319f987
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
A three-way if/else-if/else had the same line of code as all three
branches and a TODO to fix that. As it happens, the flags being
tested here are irrelevant; they indicate whether the transition time
(which is always given in UTC) was *specified* (i.e. the how a
relevant authority identified the transition time) in terms of local
wall-clock time, local standard time or UTC. The correction
contemplated by TODO (and experimented with in an earlier version of
this change, that broke correct tests) has in fact been done for us by
the zoneinfo package's zic (zone-info compiler) in the course of
writing the binary file we're parsing. These flags are only present
in the binary file to enable the date command to correctly handle
POSIX-style values for the TZ environment variable.
We consequently have no need for the tz_ttisgmt or tz_ttisstd fields
of our QTzType and can save the bother of recording them, when reading
their part of the file.
Change-Id: Ia33e87291ecc383eb5cb796d7b8a5213a94f1648
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check we do handle DST after epoch and don't before.
Check we do notice various unusual transitions.
Check we do handle non-whole-hour-offset zones.
(Unfortunately, MS-Win lacks data for some of the zones and is wrong
about the two date-line crossers, so we skip those for it.)
Change-Id: If420d61b9db7f914ca25c22297c16e917ad2307a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, the updating of drives in QFileSystemModel was connected
to a signal triggering when a drive containing watched files was
removed via QFileSystemWatcher notification. This did not trigger
when a drive that was not expanded in the view was removed, since
no files were watched.
Since QFileSystemModel is not interested in the path of the drive
being removed, add a generic signal triggered by
DBT_DEVTYP_VOLUME/DBT_DEVICEREMOVECOMPLETE and use that to update
the drives.
Complements 8e79806d08.
Task-number: QTBUG-18729
Task-number: QTBUG-53436
Change-Id: Ibcde4665824c41151042237d4d620c48bc1e2e18
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Move the logic to set default values for VERSION,
QMAKE_TARGET_DESCRIPTION to qt_app.prf. This way,
a lot more executables get sane defaults.
Change-Id: I8394418c118a8877cec792eddc8894397c0fbf2d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Make the tool description even simpler so that e.g. moc shows up as
"Qt Moc". The 'description' is shown in various places as the mere
title, so it shouldn't be too verbose.
This augments change ad68bf51e7.
Task-number: QTBUG-61970
Change-Id: I4b30b95a10d597a9a8a2c388c2381ea38a340be6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QWinEventNotifiers were limited to 62 instances, because of
WaitForMultipleObject's limitation to MAXIMUM_WAIT_OBJECTS - 1 handles.
Use the RegisterWaitForSingleObject API which does not have this
restriction and executes waits in threads managed by the system. A
central manual reset event per event dispatcher is signaled in the
RegisterWaitForSingleObject callback and waited for in the event loop.
Task-number: QTBUG-8819
Change-Id: I3061811c18e669becf9de603bbdd7ba96e4d2fcd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
When ::WSAIoctl() reports 1 byte available for reading, we are trying
to peek an incoming datagram to ensure that the data is actually
delivered. But, according to MSDN docs, we are not allowed to pass NULL
as 'lpNumberOfBytesRecvd' parameter to ::WSARecvFrom() call, if
'lpOverlapped' parameter is also NULL.
The case with an empty datagram is fixed accordingly.
Change-Id: Id13038245332d3fb4bc18038d44a7cfd7ce04775
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Restrict the checking to the internal window handle to prevent it being
thrown off by other WM_USER messages used by applications.
Complements change 124b9a6ff8.
Task-number: QTBUG-62083
Change-Id: Ifb1b00e4ff70cb7e53873943e46cea0d72ff6257
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
MinGW 7.1 claims the qUuidOf<> specializations are unused:
In file included from accessible\qwindowsaccessibility.cpp:59:0:
accessible\iaccessible2.h:274:5: error: 'IID qUuidOf() [with DesiredInterface = IAccessible2]' defined but not used [-Werror=unused-function]
IID qUuidOf<IAccessible2>() { return IID_IAccessible2; }
^~~~~~~~~~~~~~~~~~~~~
In file included from accessible\qwindowsaccessibility.cpp:59:0:
accessible\iaccessible2.h:58:5: error: 'IID qUuidOf() [with DesiredInterface = IAccessibleComponent]' defined but not used [-Werror=unused-function]
IID qUuidOf<IAccessibleComponent>() { return IID_IAccessibleComponent; }
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Amends 4f599c5ea1.
Change-Id: Iafcfe8b8d8ca9cdf00663f39ad491347b51d3ace
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Split the test in two: one test that requires the symlinks
and test files and one that does not need them.
In the test with test files, verify each step and the deletion
of the files.
Task-number: QTBUG-58654
Task-number: QTBUG-50835
Change-Id: I14de57ce7a1df2d834d5a7565c804dead1d89088
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test is just wrong.
It suggests, that it tests minimal block size,
but in reality it is checking if a maximal peak of block size
is bigger then expected minimum block size.
The minimal block size is 1, not 1024 / ideal threads count and
it is defined in BlockSizeManagerV2.
The maximal block size is defined and it is fixed, but it is an
implementation detail, probably not worth testing.
The test is based on a race condition as peakBegin and
peakBlockSize are modified in parallel from multiple threads,
without any synchronization.
Change-Id: I430eedcf83b0fa3e2ce2cfd294eaee7b301e48ae
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
