It is neither documented nor very useful, and it has
platform-specific issues as reported over the years.
Remove it now as part of the example revamp initiative.
Task-number: QTBUG-50278
Task-number: QTBUG-110093
Task-number: QTBUG-76054
Task-number: QTBUG-43209
Pick-to: 6.5
Change-Id: I6dadaf4162b4c19411c544b9f204c19e37aa740d
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
OpenSSL doesn't support some Blake2s and Blake2b hashes and querying
these would automatically report that they are unsupported, while we are
actually using non-OpenSSL implementataion for these and therefore they
are always supported.
Pick-to: 6.5
Change-Id: I300694459891c3103502705d6c8271caa47d8d01
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If a style sheet is applied to a scrollbar, then we cannot treat it as
transient, as the QStyleSheetStyle doesn't implement any fade-in/out
animation logic. And we also need to set the overlap to 0 (in both
the style sheet and the macOS style) if the scrollbars are not
transient; otherwise the opaque scrollbar will be placed on top of the
content.
Since a style sheet might only apply to a scrollbar based on its
orientation, we also have to pass the style option through to all calls
of the styleHint function.
And since that function is also called from other QStyle implementations
in the macOS style, we have to make sure that we call styleHint() on the
widget's style to get the correct value based on the style sheet.
Fixes: QTBUG-63381
Pick-to: 6.5 6.4 6.2
Change-Id: Ic67ce3a7cb5089f885dabfd5a1951e3029915446
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
QGuiApplication::lastCursorPosition is a QPointF, and (at least on macOS)
compares always different from the QPointF stored in the event. This
might be due to the translation from system coordinates to QPointF
introducing noise.
The result is that even a simple button press causes mouseMove events
to be delivered.
To prevent this event noise, overload equality operators for the special
QLastCursorPosition type when comparing with QPointF to explicitly use
single precision comparison.
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-111170
Change-Id: I82ea23ac9f4fa80c55c9c5c742527dd7ee74fd99
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Runtime support is indicated via QRhi::Feature::HalfAttributes.
OpenGL support is available in OpenGL 3.0+, OpenGL ES 3.0+, and in
implementations that support the extension GL_ARB_half_float_vertex.
Other RHI backends (Vulkan, Metal, D3D11, and D3D12) all support this
feature.
Note that D3D does not support the half3 type. D3D backends pass half3
as half4.
tst_qrhi auto unit test included.
Change-Id: Ide05d7f62f6102ad5cae1b3681fdda98d52bca31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Runtime support is indicated via QRhi::Feature::HalfAttributes.
OpenGL support is available in OpenGL 3.0+, OpenGL ES 3.0+, and in
implementations that support the extension GL_ARB_half_float_vertex.
Other RHI backends (Vulkan, Metal, D3D11, and D3D12) all support this
feature.
Note that D3D does not support the half3 type. D3D backends pass half3
as half4.
tst_qrhi auto unit test included.
Change-Id: Ide05d7f62f6102ad5cae1b3681fdda98d52bca31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Runtime support is indicated via QRhi::Feature::HalfAttributes.
OpenGL support is available in OpenGL 3.0+, OpenGL ES 3.0+, and in
implementations that support the extension GL_ARB_half_float_vertex.
Other RHI backends (Vulkan, Metal, D3D11, and D3D12) all support this
feature.
Note that D3D does not support the half3 type. D3D backends pass half3
as half4.
tst_qrhi auto unit test included.
Change-Id: Ide05d7f62f6102ad5cae1b3681fdda98d52bca31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Runtime support is indicated via QRhi::Feature::HalfAttributes.
OpenGL support is available in OpenGL 3.0+, OpenGL ES 3.0+, and in
implementations that support the extension GL_ARB_half_float_vertex.
Other RHI backends (Vulkan, Metal, D3D11, and D3D12) all support this
feature.
Note that D3D does not support the half3 type. D3D backends pass half3
as half4.
tst_qrhi auto unit test included.
Change-Id: Ide05d7f62f6102ad5cae1b3681fdda98d52bca31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Runtime support is indicated via QRhi::Feature::HalfAttributes.
OpenGL support is available in OpenGL 3.0+, OpenGL ES 3.0+, and in
implementations that support the extension GL_ARB_half_float_vertex.
Other RHI backends (Vulkan, Metal, D3D11, and D3D12) all support this
feature.
Note that D3D does not support the half3 type. D3D backends pass half3
as half4.
tst_qrhi auto unit test included.
Change-Id: Ide05d7f62f6102ad5cae1b3681fdda98d52bca31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Runtime support is indicated via QRhi::Feature::HalfAttributes.
OpenGL support is available in OpenGL 3.0+, OpenGL ES 3.0+, and in
implementations that support the extension GL_ARB_half_float_vertex.
Other RHI backends (Vulkan, Metal, D3D11, and D3D12) all support this
feature.
Note that D3D does not support the half3 type. D3D backends pass half3
as half4.
tst_qrhi auto unit test included.
Change-Id: Ide05d7f62f6102ad5cae1b3681fdda98d52bca31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Runtime support is indicated via QRhi::Feature::HalfAttributes.
OpenGL support is available in OpenGL 3.0+, OpenGL ES 3.0+, and in
implementations that support the extension GL_ARB_half_float_vertex.
Other RHI backends (Vulkan, Metal, D3D11, and D3D12) all support this
feature.
Note that D3D does not support the half3 type. D3D backends pass half3
as half4.
tst_qrhi auto unit test included.
Change-Id: Ide05d7f62f6102ad5cae1b3681fdda98d52bca31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Runtime support is indicated via QRhi::Feature::HalfAttributes.
OpenGL support is available in OpenGL 3.0+, OpenGL ES 3.0+, and in
implementations that support the extension GL_ARB_half_float_vertex.
Other RHI backends (Vulkan, Metal, D3D11, and D3D12) all support this
feature.
Note that D3D does not support the half3 type. D3D backends pass half3
as half4.
tst_qrhi auto unit test included.
Change-Id: Ide05d7f62f6102ad5cae1b3681fdda98d52bca31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Runtime support is indicated via QRhi::Feature::HalfAttributes.
OpenGL support is available in OpenGL 3.0+, OpenGL ES 3.0+, and in
implementations that support the extension GL_ARB_half_float_vertex.
Other RHI backends (Vulkan, Metal, D3D11, and D3D12) all support this
feature.
Note that D3D does not support the half3 type. D3D backends pass half3
as half4.
tst_qrhi auto unit test included.
Change-Id: Ide05d7f62f6102ad5cae1b3681fdda98d52bca31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Runtime support is indicated via QRhi::Feature::HalfAttributes.
OpenGL support is available in OpenGL 3.0+, OpenGL ES 3.0+, and in
implementations that support the extension GL_ARB_half_float_vertex.
Other RHI backends (Vulkan, Metal, D3D11, and D3D12) all support this
feature.
Note that D3D does not support the half3 type. D3D backends pass half3
as half4.
tst_qrhi auto unit test included.
Change-Id: Ide05d7f62f6102ad5cae1b3681fdda98d52bca31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
If a style sheet is applied to a scrollbar, then we cannot treat it as
transient, as the QStyleSheetStyle doesn't implement any fade-in/out
animation logic. And we also need to set the overlap to 0 (in both
the style sheet and the macOS style) if the scrollbars are not
transient; otherwise the opaque scrollbar will be placed on top of the
content.
Since a style sheet might only apply to a scrollbar based on its
orientation, we also have to pass the style option through to all calls
of the styleHint function.
And since that function is also called from other QStyle implementations
in the macOS style, we have to make sure that we call styleHint() on the
widget's style to get the correct value based on the style sheet.
Fixes: QTBUG-63381
Pick-to: 6.5 6.4 6.2
Change-Id: Ic67ce3a7cb5089f885dabfd5a1951e3029915446
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
QGuiApplication::lastCursorPosition is a QPointF, and (at least on macOS)
compares always different from the QPointF stored in the event. This
might be due to the translation from system coordinates to QPointF
introducing noise.
The result is that even a simple button press causes mouseMove events
to be delivered.
To prevent this event noise, overload equality operators for the special
QLastCursorPosition type when comparing with QPointF to explicitly use
single precision comparison.
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-111170
Change-Id: I82ea23ac9f4fa80c55c9c5c742527dd7ee74fd99
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Use lambdas instead of slots where practical.
Consistently use signals to transmit D-Bus messages.
Extract a local variable for the used D-Bus connection.
Task-number: QTBUG-111366
Pick-to: 6.5
Change-Id: Icc6667e1392ada1b7d3b33c4e4b32917dd648390
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This gets rid of a custom form. Also quit the application if user
closes the input dialog without entering a nickname.
Task-number: QTBUG-111366
Pick-to: 6.5
Change-Id: I56ed99d69d031e7ef06711fc7ec112311c974ca6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
All QtQuickControls examples are marked for android by default.
However, the To Do List example is iOS specific so don't include it.
Add it to the list of iOS tags instead.
Fixes: QTBUG-111426
Pick-to: 6.5 6.4
Change-Id: Ic89d6b40d263f81ed402a2064f2e44b2fa826940
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
... it conflicts with rfc6234/sha.h's SHA{1,224,256,384,512} symbols.
We can't drop the rfc6234/sha.h header, as openssl/sha.h doesn't give
us the algorithm's block sizes, necessary for HMAC
(QMessageAuthenticationCode).
But we can drop openssl/sha.h. The only reason we included the header
was to get access to SHA<N>_DIGEST_LENGTH, but this is a well-known
value and easily obtained from rfc6234/sha.h as SHA<N>HashSize, so use
that.
Even reduces #ifdef'ery.
Amends d9f9d03fd3.
Fixes: QTBUG-111467
Pick-to: 6.5
Change-Id: Ice19ad8c788fb2828666647cc40abb894cd7af2b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Repeating the body of the reported bug, "Building Qt modules with qmake
is unsupported in Qt6 and since 6.5's switch to syncqt.cpp broken."
[ChangeLog][qmake] Support for building Qt modules with qmake was
removed.
Pick-to: 6.5
Fixes: QTBUG-110134
Change-Id: Iee5aa5c85f7106bce742df448ec502e6cc039454
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Amends 0242be9060, and removes unwanted
side effect of having a modified style behavior for later functions.
Pick-to: 6.5 6.4 6.2
Change-Id: If3dff0d7ab9e6c6c10e7a92d0a3eaff98fa1457f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
GetFocus will return the window that currently has keyboard focus. This
is not what we want for drag and drop handling though. Use the window
under mouse and process events for that window when doing the touch/pen
input workaround. If no window is found we fall back to the focus
window. Followup to 31e7790102
Fixes: QTBUG-111149
Pick-to: 6.5 6.4 6.2
Change-Id: Ib8233debc267df0cc19b21c1dc5c6881d018d84a
Reviewed-by: Timothée Keller <timothee.keller@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When ICU is not available, QTimeZone::displayName() does not return a
valid timezone offset string so the OCI driver will get a wrong utc
offset string and inserting a QDateTime will go wrong.
Fix it by creating the utc offset string by ourself (toOffsetString()
inside qdatetime.cpp is static and therefore not accessible for us).
Pick-to: 6.5 6.4 6.2 5.15
Fixes: QTBUG-111275
Change-Id: Ib724d760688614e162246e1e028ee5e004cc9477
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This makes it explicit when we process the key (setKey() called) and
when we don't. That the old initMessageHash() left the key alone if it
already had the correct size was properly hidden in plain sight. The
split makes clearer what's going on.
Pick-to: 6.5
Change-Id: Ib013dbf8b976aa9f564224866091256aa8434cbd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Iterators were missing. Provide a const data() overload to implement
the iterator functions in their natural form.
Pick-to: 6.5
Change-Id: I906013e55fce2effbedba0d283fb4cea3b512fdd
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unconditionally returning true is incorrect, not only just since
NumAlgorithms was added in 0411d98192.
The values may have gaps, we might be compiling with SHA1_ONLY, and,
on a language-lawyer level, enums can legally contain values other
than those explicitly enumerated, so give the right answer in all of
these cases.
Pick-to: 6.5
Change-Id: I705d4f759b2572b8b3d1cee18b7939939eedbbac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I don't think any of these make a difference because the Duration is an
implied parameter because of the time_point arguments, but this makes
the code match QDeadlineTimer::deadline<T>.
Pick-to: 6.5
Change-Id: Ieec322d73c1e40ad95c8fffd17468a41182944ab
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's the only place that uses it.
Pick-to: 6.5
Change-Id: Ieec322d73c1e40ad95c8fffd17465370ac209c2f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Where it has a home with its other timespec/chrono siblings.
Luckily I only needed to change one place in the code, and that source
file already has #include's q_core_unix_p.h.
Change-Id: I783383f958ceccfd6f9210f0b76d35b0f82b7cb5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Not all callers pass a view-type object: there are several call points
passing a QVarLengthArray, which means the value ended up being copied.
Introduced in 67108ef8db. Found by
Coverity scan (CID 404702).
Change-Id: I9671dee8ceb64aa9b9cafffd1742f9cda2131752
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This reverts commit e76bcaa203.
I managed to reproduce the warning with GCC 12. It only happens
with -flto (LTCG) builds, not in regular release builds.
Change-Id: I6747273300ee51dec05563233017ba0cdf46794a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Replace the QVarLengthArray with HashBlock, an instantiation of
QSmallByteArray. Unlike QVLA, which may allocate memory when
capacity() exceeds Prealloc (not the case here, but could become an
issue with future hash algorithms, we're at 144 now, up from the
traditional 64), QSmallByteArray never throws, and the few Q_ASSERT()s
it contains don't matter, because we use the class' functions
in-contract here.
Requires to add an indexing operator to QSmallByteArray.
Pick-to: 6.5
Change-Id: Ica3656adc190e0141e065287fadc38e0cebce0f4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This minimizes the impedance mismatch between
QCryptographicViewPrivate and QMessageAuthenticationCodePrivate and is
the penultimate step to finally marking QMAC's finalizeUnchecked()
noexcept, too (QCH's has been for a few Qt versions now).
It also enables adding a QMAC::resultView() a la QCH::resultView(),
but that's another commit, as 6.5 is closed for new API.
Pick-to: 6.5
Change-Id: I3fe228585c560d8d32e99e12bba2be21fddaf642
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The only reason why we couldn't before was because we had a view on
messageHash's result, which would have been clobbered when resetting
messageHash for reuse.
Since QMessageAuthenticationCodePrivate now contains
QCryptographicHashPrivate, we gain access to the latter's
QSmallByteArray result, and can just take a copy before reset()ing.
Re-using a QCryptographicHash is faster than creating a new one,
esp. in OpenSSL3 mode, where construction allocates a context while
reset() no longer does.
Pick-to: 6.5
Change-Id: I3bc0454918840a104fd53909e79b6fe21326bfbf
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Because we can, and as a preparation for using it to determine the size
of a fixed-size buffer for the HMAC's key material.
Pick-to: 6.5
Change-Id: I4add1115ef6d649baab25a842e1238db8a98bb7d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add Algorithm::NumAlgorithms and use it to iterate over all
statically-available algorithms, querying their hashLengthInternal().
This avoids having to statically_assert(<= MaxHashLength) everywhere,
and auto-adjusts the buffer size in SHA1_ONLY builds.
Yes, the extra case labels for NumAlgorithms are a nuisance, but at
least the compiler will remind us when we forget, unlike a missing
static_cast(<= MaxHashLength) that might easily be forgotten.
Adjust the test (which iterates over the QMetaEnum for
QCryptographicHash::Algorithm, so finds NumAlgorithms and tries to
pass it to the hash() function which responds with a
Q_UNREACHABLE(). Only test hashLength() == 0 for that enum value.
Pick-to: 6.5
Change-Id: I70155d2460464f0b2094e136eb6bea185effc9d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
