Still do a begin/end reset model in place, which is probably not the
best code but since it's a test and it works it should be enough
Change-Id: Iffaf8d69d5be64ef5e1e359e3d90a1e8174fc13b
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
to make it work with our new docker-based test server.
Change-Id: I76345a2d3d768b8a571f2c85e69f6a21e9a96d7e
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Test fails on minimal and offscreen platforms.
Task-number: QTBUG-73522
Task-number: QTQAINFRA-2630
Change-Id: I6260454be35a8bbac1ab683d89fb7b262d3b69ab
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Remove wrong code changing the Bido level of line separators. This
lead to wrong ordering of the string in case the line separator was
meant to be ignored and the string should be rendered in one line. Line
breaks are anyways already reset to the paragraph level by the algorithm
and reordering is done on a line by line basis, so this will work
correctly when doing proper line breaking.
Secondly fix a small bug found while testing the above change, where
we wouldn't set the correct levels for boundary neutrals and explicit
embedding chars because we did that processing before we were fully
done with the BiDi algorithm.
Change-Id: Id88f91cd58d2ab29be864aef34ca1727c1586611
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The algorithm has been treating DirB inconsistently so far.
initScriptAnalysisAndIsolatePairs was treating it differently
than generateDireationalRuns leading to assertions.
It wasn't visible in our test data, as DirB is in almost all cases the
paragraph separator, where we split strings anyway.
Change-Id: I7dc0e7bbcf30ee84d8781ea06097da023e371f05
Fixes: QTBUG-73238
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Adn create that data structure on demand on the heap.
This reduces the size of QObjectPrivate if there are no
connections. If we have connections, it'll use the same
amount of allocations and memory as before.
Change-Id: I900f6980a2cd8a5f72c3ad18697b5dd49100217d
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Measurements show that it's just almost as fast to simply query
the connectionlist directly and avoid both the memory
overhead of the bitfield and the associated bookkeeping.
For connected signals, the difference is not relevant at all.
With a signal that was never connected, removing the bitfield will
cause signal emission to be ~2.5% faster. And if you ever disconnect
from a signal, the bitfields might not be accurate and this can
cause a major slowdown.
Here are some numbers to validate this. All times are measured
in ms for 100M signal emissions:
without change with change
string based connect: 3817 3836
pointer based connect: 4552 4571
not connected: 493 479
disconnected: 2113 559
Change-Id: Ia2c85036afaa7f991b883c8ff812f69cf4580f7e
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: hjk <hjk@qt.io>
Constructing a QStringRef directly from the string, offset and a
length is UB if the offset + length exceeds the string's length.
Thanks to Robert Loehning and libFuzzer for finding this.
QString::midRef (as correctly used in both changed uses of QStringRef,
since 432d3b6962) takes care of that for us. Changed one UB case and
a matching but correct case, for consistency.
In the process, deduplicate a QStringList look-up.
Added tests to exercise the code (but the one that exercises the
formerly UB case doesn't crash before the fix, so isn't very useful;
the invalid read is only outside the array it's scanning, not outside
allocated memory).
Change-Id: I7051bbbc0267dd7ec0a8f75eee2034d0b7eb75a2
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Adds QColorSpace and QColorTransform classes,
and parsing of a common subset of ICC profiles
found in images, and also parses the ICC profiles
in PNG and JPEGs.
For backwards compatibility no automatic color
handling is done by this patch.
[ChangeLog][QtGui] A QColorSpace class has been added,
and color spaces are now parsed from PNG and JPEG images.
No automatic color space conversion is done however, and
applications must request it.
Change-Id: Ic09935f84640a716467fa3a9ed1e73c02daf3675
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The coin agent starts to crash after the docker-compose call.
Need to have qt5 dev integrated first, then fix the real issue later.
Task-number: QTQAINFRA-2717
Task-number: QTQAINFRA-2750
Change-Id: I255c0c10466cc9413ca41c756ebdb7c049511507
Reviewed-by: Aapo Keskimolo <aapo.keskimolo@qt.io>
Mark some long obsolete functions as deprecated so the can be removed
with Qt6:
- QDialog::setOrientation()/orientation()
- QDialog::setExtension()/extension()/showExtension()
- QFileDialog::setNameFilterDetailsVisible()/isNameFilterDetailsVisible()
- QFileDialog::setResolveSymlinks()/resolveSymlinks()
Change-Id: Ibbd5b4192ea8ab483d6b2a8dbf9879f29f9ee86d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The coin agent starts to crash after the docker-compose call.
Need to have qt5 5.13 integrated first, then fix the real issue later.
Task-number: QTQAINFRA-2717
Task-number: QTQAINFRA-2750
Change-Id: I3dcd963b1c5cea0b2197f1589398d8a9ed18f46f
Reviewed-by: Aapo Keskimolo <aapo.keskimolo@qt.io>
Tidied up the existing float tests in the process.
(In particular, s/SUCCESS/PASS/ since that matches real test output.)
These verify that QCOMPARE() handles floats and doubles as intended.
Extended the existing qFuzzyCompare tests to probe the boundaries of
the ranges of values of both types, in the process.
Revised the toString<double> that qCompare() uses to give enough
precision to actually show some of the differences being tested there
(12 digits, to match what qFuzzyCompare tests, so as to show different
values rather than, e.g. 1e12 for both expected and actual) and to
give consistent results for infinities and NaN (MinGW had eccentric
versions for these, leading to different output from tests, which thus
failed); did the latter also for toString<float> and fixed stray zeros
in MinGW's exponents (which made a kludge in tst_selftest.cpp
redundant, so I removed that, too).
That's further complicated handling of floating-point types, so let's
just keep an eye on how expensive that's getting by adding a benchmark
test for QTest::toString(). Unfortunately, default settings only get
runs that take modest numbers of milliseconds (some as low as 40)
while increasing this with -minumumvalue 100 or more gets the process
killed - and I'm unable to find out who's doing the killing (it's not
QProcess::kill, ::kill or the QtTest WatchDog, as far as I can tell).
So results are rather noisy; the integral tests exhibit speed-ups by
factors up to 5, and slow-downs by factors up to 100, between runs
with and without this change, which does not affec the integral tests.
The relatively modest slow-downs and speed-ups in the floating point
tests thus seem likely to be happenstance rather than signal.
Change-Id: I4a6bbbab6a43bf14a4089e96238a7c8da2c3127e
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Search the previous item or the next item in a model instead
of searching them on visual layout. This way the cursor will
not stop at the beginning or at the end of a row or a column.
Fixes: QTBUG-14444
Change-Id: I0ef203a4dcd876e4c50559fb87e61585f07434d1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
It is the flaky test causing most failures in qtbase at the moment.
Task-number: QTBUG-73545
Change-Id: Id9c5db27ebd08a4cf3c119d2fada12fdf1a5d2a0
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
We translate all pure gray colors into cmyk having c,m,y=0 and only
the k value expressing the darkness. But a fix introduced to avoid
division by 0 caused rgb(0, 0, 0) to be an exception to this; it ended
up being translated as c,m,y,k=1 instead.
Fix by catching the potential div-by-0 situation earlier and directly
set the orthodox cmyk translation: c,m,y=0,k=1.
Fixes: QTBUG-73171
Change-Id: I3774eaf9d96e096ac5c47c55d28881bea2bd1309
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
For some overly tight beziers where the start or end point and the
next control point are closer than the pen width, the stroker's
shifting algorithm will produce a start/end tangent pointing in the
opposite direction from what is expected, for one of the sides. This
would break the square and round capping logic. Fix by detecting the
situation in the capping function and reversing the tangent when
necessary.
Change-Id: I48f4f017403d7b289b0483dd2b3a7ff1bbd0cf2a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
tst_QHeaderView::defaultSectionSizeTest() fails on High-DPI screens
because the default minimum section size is greater than the values used
for testing the header sizes. Therefore the test will fail.
Fix it by explicitly setting the minimum header size to something
smaller than the test values.
Also add a debug line to output the default minimum section sizes so
other failures due to this problem can be debugged better.
Fixes: QTBUG-73309
Change-Id: I257f341cef9381f140aa4d4f68376c5edadc39cc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Only for tests that have existing expected_*.* files for other
formats, though.
Change-Id: I34ca1900d88454f300e04d849a608c378009489b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Regexes have long specified that a [ as the first character inside a
[...] is just a literal [, but apparently we need to escape it now, to
avoid a "nested set" FutureWarning.
Change-Id: I76a48c9aafb0684a1d6b0d5284fe9852c9ea0e43
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
This is required to support the new emoji font on Android 9.
[ChangeLog][Freetype] Upgraded bundled Freetype version to 2.9.1.
This also adds support for the latest emoji font in use on
Android 9.
Fixes: QTBUG-70657
Change-Id: I99be72f0d23c20aca122b8fdadd4ded87b2edce1
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Only the first successful query was stored in the variable. When a new
query is executed the function QSqlResult::setActive was not replacing
the last executed query.
Fixes: QTBUG-28883
Change-Id: Ib4938c42e6264f9edd0764b4a392da7988f68fc0
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
After the system reboots, the docker machine is created, but in a
stopped state. As stated in the docker docs, you might get errors when
attempting to connect to a machine or pull an image from Docker Hub.
For instance, Error checking TLS connection: ...
The solution is to regenerate TLS certificates of docker machine after
machine resums.
Change-Id: I8781ac0f0790aeda6cc778aee9c44d03c2b788d3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Prioritize blacklisting over QEXPECT_FAIL so that a test that is
blacklisted no longer fails if QEXPECT_FAIL returns true unexpectedly. To
reflect this state properly, the two values of BXPASS and BXFAIL were
added to testlib's output.
[ChangeLog][Important Behavior Changes][QtTestLib] Blacklisting of tests
will be taken into account for XPASS and XFAIL. A blacklisted test that
causes an XPASS will no longer be a fail.
Task-number: QTBUG-72928
Change-Id: Ia2232fdc714d405fa3fd9aea6c89eb2836bc5950
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtNetwork][SSL] The Schannel backend now supports ALPN and
thus HTTP/2.
Change-Id: I1819a936ec3c9e0118b9dad12681f791262d4db2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Mark some long obsolete functions as deprecated so the can be removed
with Qt6:
- QTextFormat::setAnchorName()/anchorName()
- QTextList::isEmpty()
Change-Id: Ic1f5317980d116c846def3645d2a6cd61ba8679d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The test started to fail now also for latest Windows 10 Update
Restone 2. It's unclear why the test was succeeding before, since this
seems a generic Windows API issue.
Task-number: QTBUG-64985
Task-number: QTQAINFRA-2255
Change-Id: I804f6a61c63ea70157353d1aee9027d0735073ab
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
On Windows and macOS, the containers are deployed into a virtual
machine using the host network. All the containers share the same
hostname (qt-test-server), and they are connected to the same network
domain (local).
When running test in such platforms, use the single-name SSL certificate
(qt-test-server.local) for SSL related tests.
Change-Id: Idf33e01e8dd8814510d848b87b59b5fc0edc903e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This checks that intenalHwnd in QEventDispatcherWin32::remainingTime is
initialized. If calling remaningTime, before createInternalHwnd
is called, the timeout member in the WinTimerInfo struct is not
initialized and contains a random value. This adds a check for that and
in that case returns the requested timer interval as the timer has not
yet been started. createInternalHwnd is called on the first request to
process events.
It also adds a test for checking the remaining time. But the issue can
only be seen if solely running the remainingTimeInitial test in
tst_QTimer. If running the test along side another test the other
test likely calls processEvents indirectly, which hides the issue. I
don't know if this is an issue in practice (the bug has been there
for as long a the git history goes back, 2011), but it causes the
basic_chrono test to fail if run as the only test.
Change-Id: I05c35105da778912dedf8d749aa7c953841d986e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before this the remaining time in the two tests 'remainingTime' and
'basic_chrono' had to be within the interval [100,200]. This relaxes
that to [50,200]. This test seems to be failing a lot when staging
changes in gerrit. I can reproduce some of the problem when putting a
lot of load on my system and running the tests, then remaining time is
very random.
Also removes the blacklist of remaingTime on Windows and macOS, as
basic_chrono and remaningTime tests are basically the same. The
tests also fails on Linux some times in gerrit.
I was also thinking one could:
- blacklist both tests
- remove interval requirements; just check remaining time is [0,200]
- remove the tests
Task-number: QTBUG-61013
Change-Id: I5c8f0754d059598e023fe8e5d511f4a50bb4bac2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QItemDelegate::comboBox() is flaky because sometimes the used
QTableWidget does not yet have the focus which prevents a correct
editing. Fix it by explictily setting the focus on the widget after it
is shown.
A similar fix was added for dateTimeEditor() in
9822d57d85.
With this patch the test no longer fails for my on opensuse, therefore
remove the blacklisting.
Task-number: QTBUG-67282
Change-Id: I907db662ca347f8e8d31e5be215a100377b159ca
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Non-local ASM labels break for this test when compiled with clang.
Change-Id: I15bd250a991c3b03bbc88459a6358090bd157444
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
For some reason behavior of SecureTransport has changed from 10.12 to 10.13
and then to 10.14. On 10.13 SecureTransport fails upon receiving the server's
certificate with 'Unrecoverable error', before we can do a manual verification
and accept the certificate as trusted. Analysis of available source code
shows that they, apparently, do not like MD5 hash which our server is using.
Until certificate is updated on the server or we switch completely to
the Docker-based solution we have to BLACKLIST tests that connect to our
current network test-server. Oddly enough, on 10.14 SecureTransport is
less mean.
Task-number: QTBUG-69873
Change-Id: I7da1883e0970a2f6ddd8385f193b76116d6983e0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Based on Asmo Saarela's advice (QTPM-686), adapted on advice from
FrogLogic support and converted to a feature so that the selftest and
testlib qmake config can be co-ordinated.
Task-number: QTPM-1385
Change-Id: Icd706f086009e1e08b3f8c5cd553f792402e28c0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
COMPOSE_CONVERT_WINDOWS_PATHS is supported by Docker and available
for you to configure the docker-compose command-line behavior. It
enables path conversion from Windows-style to Unix-style in volume
definitions. Users of Docker Machine and Docker Toolbox on Windows
should always set this to true.
Change-Id: Ib59756ad68482fdd889ce39ab1ab0118b5fc9071
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Currently only available for the OpenSSL backend to use but doesn't
actually rely on anything OpenSSL specific.
Move it so it can be used by the Schannel backend in an upcoming patch
Change-Id: Ia29b153bf3f29cff0d62a41ec5dd7d4671a18095
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
While it's not common it still occurs, perhaps especially with 127.0.0.1
Can be tested by attempting to connect to https://1.1.1.1/ using Qt.
Change-Id: Idad56476597ab570b8347236ff700fa66ab5b1f4
Fixes: QTBUG-71828
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Since some databases are case sensitive if part of the query is quoted,
then we should ensure that all instances of the table name are escaped
unless the test is delibrately testing the non-escaped case.
As a result, this commit also removes some expected failures pertaining
to PostgreSQL and also adds an entry to the list of tables being dropped
when a test is finished.
[ChangeLog][Sql][PostgreSQL] QSqlDatabase is now stricter about table
names when used with record() and primaryIndex(). If the tablename was
not quoted when it was created, then the table name passed to record()
and primaryIndex() needs to be in lower case so that PostgreSQL is
able to find it.
Fixes: QTBUG-65788
Change-Id: Id1f54cb66b761c39edf858501b730ede7eec1fd3
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QFile/QFileInfo::readLink() functions are obsolete but were not marked
as deprecated.
Explicit mark them as deprecated so they can be removed with Qt6.
Change-Id: I52424dc5441e1f5b01015713df990bbec5186caa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
QProcess::finished(int)/readChannelMode()/setReadChannelMode() are
obsolete but were not marked as deprecated.
Explicit mark them as deprecated so they can be removed with Qt6.
Change-Id: Iedbfd80a3c987f35caf93181e9277913a18961d9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Change b86d0b6215 rearranged the
sequence of function calls when generating code adding QTabWidget
and QToolBox pages, not taking into account that the iconCall()
has a side effect (writing out icon definition) Revert that part
and add a comment.
Fixes: QTBUG-72980
Task-number: PYSIDE-797
Change-Id: Ie8fbaa36f21cd4408fb1f491195da5c260708e6c
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Useful in contexts such as other QDebug operators, where the class
is already known, and the full scope of the flags is not needed.
Change-Id: I546381b1722c9c846e2412e56763563b8f625212
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Useful in contexts such as other QDebug operators, where the class
is already known, and the full scope of the enum is not needed.
Change-Id: Ibd04b1fd4f0f914c7224a007fc248d4ebabcde3e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Setting the fall-back network interface of danted's environment to eth0
by docker-compose file is redundant because the value of danted's
configuration (danted.conf) has been set to eth0 by default.
Change-Id: If2dea8daaf851577a573e201e9c50684916e5206
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
For macOS and Windows, the test-server containers are deployed in the
VirtualBox (Boot2Docker). Because Boot2Docker is a lightweight Linux
distribution made specifically to run Docker containers, it doesn't
install avahi-daemon and support mDNS discovery.
To resolve this problem, Docker compose file supports "extra_hosts" to
add hostname mappings inside containers.
BFAIL items:
tst_QNetworkReply::headFromHttp(...+proxy...) (ten cases)
tst_QNetworkReply::ioGetWithManyProxies(http-on-http)
tst_QNetworkReply::ioGetWithManyProxies(http-on-http2)
tst_QNetworkReply::ioGetWithManyProxies(http-on-multiple-http)
tst_QNetworkReply::ioGetWithManyProxies(http-on-http+socks)
tst_QNetworkReply::ioGetWithManyProxies(http-on-ftp+http+socks)
tst_QNetworkReply::ioPostToHttpFromSocket(...+proxy) (twelve cases)
tst_QNetworkReply::ioPostToHttpFromSocket(...+proxyauth) (ten cases)
Change-Id: Iec55966a9b5f191b7446985a15b49a8b09dcf407
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Docker compose file supports variable substitution. When running
docker-compose up, Compose looks for the environment variables from
shell and substitutes the values at runtime.
Change-Id: I5255ead82276fac7db24ee74af453f83ca20bbe6
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There is no docker bridge on Windows. Docker document recommends using
port mapping to connect to a container. The problem is that it causes a
port conflict if the user is running a service that binds the same port
on the host. This change applies the same solution of macOS to deploy
the docker environment into VirtualBox and use the host network option.
Task-number: QTQAINFRA-2294
Change-Id: Iedcb8daa39373f02adb59f02eae2775f02870c54
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Apparently, it is not enough to just retry 10 times (10 seconds) in the
CI network. It happens from time to time that a test fails due to server
port is unreachable. Especially, the docker containers are running in a
virtual machine on Windows and macOS platforms. In such cases, it needs
more time to warm up the service depending on the system loading.
Change-Id: Ia0234bff2a82988b62f451e20b50671708784008
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Set the inherited properties as resolved on the font, so non-default
values are passed on in contexts that does resolve logic like QPainter.
One test is updated as it actually tests what it is supposed to on
more configurations.
Fixes: QTBUG-39560
Change-Id: Ief668e992ccdc091337a259a4c1306a00e67c73f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Adds support for Schannel, an SSL backend for Windows, as an
alternative to OpenSSL.
[ChangeLog][QtNetwork][Ssl] Added support for Schannel on Desktop
Windows. To build Qt with Schannel support use '-schannel' during
configure.
Task-number: QTBUG-62637
Change-Id: Ic4fb8ed3657dab994f9f4a4ac5cbddc7001a0a46
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Add qWaitForWindowExposed() for the toplevel and use QTRY_VERIFY()
for finding the delegates consistently.
Change-Id: I430088a91b5cc1a8f856d0a58aba066b1baf179b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Some of the spdy/3 tests don't pass anymore because those services
no longer support spdy/3. Solve this by updating it to HTTP/2 (h2).
Change-Id: Ib3ef6109b75f4298fed15c1c7922deca35459df9
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
tst_QString::localeAwareCompare() is failing since
ab448f731e because the 'C' locale no
longer initializes ICU and falls back to simple QString comparison.
Fix it by explicitly setting the locale for the testdata to en_US so the
QCollator is properly initialized.
Task-number: QTBUG-73116
Change-Id: I9d4d55e666c5c52f93298dedb7e22da01a25318d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 9d2923c1b0)
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
The cursor test sometimes fails due to the fact that the topLevel widget
has not yet reached it's fullscreen geometry. This means the
QGraphicsView is to small and the test will fail.
Avoid it by simply removing the topLevel widget since it's not used at
all.
Change-Id: Ia7b34f283a917a35b6665e6333a01378575a5a04
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Various tests were setting the default locale and relying on cleanup()
to "restore" the C locale; which needn't actually be the locale we
started out in and, in any case, was the wrong locale for some tests.
So handle this via an RAII class that records the actual prior locale
and restores it on destruction.
Fixes: QTBUG-73116
Change-Id: If44f7cb8c6e0ce81be396ac1ea8bab7038a86729
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The CreationDate entry in the two PDF files can potentially
be different depending on when the test is run.
97b4c5a574 already accounts for it but
the current tag for creation date is '/CreationDate'. Therefore check
if the line contains 'CreationDate' instead.
Change-Id: I1fc069cf935bba07084ac4a0743ff05312374d10
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QString::localeAwareCompare() is failing since
ab448f731e because the 'C' locale no
longer initializes ICU and falls back to simple QString comparison.
Fix it by explicitly setting the locale for the testdata to en_US so the
QCollator is properly initialized.
Task-number: QTBUG-73116
Change-Id: I9d4d55e666c5c52f93298dedb7e22da01a25318d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The output files for the tuplediagnostics selftest of testlib had a
stray non-canoical path fragment in them; so replaced with its
canonical form.
Change-Id: Ib421380036c3fb1b91447eb8c87be4ad0dfe5c96
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This appears to be a timing issue of vsftpd's initial script
(/etc/init.d/vsftpd). When starting the vsftpd service, the script uses
a while loop to make sure that the vsftpd process has been created with
the expected PID. The problem is that it should sleep if it can't grep
the same PID via ps command.
while [ ${n} -le 5 ]
do
_PID="$(if [ -e ...vsftpd.pid ]; then cat ...vsftpd.pid; fi)"
if ! ps -C vsftpd | grep -qs "${_PID}"
then
break
fi
sleep 1
n=$(( $n + 1 ))
done
if ! ps -C vsftpd | grep -qs "${_PID}"
then
log_warning_msg "vsftpd failed - probably invalid config."
exit 1
fi
However, synchronization based on time is not working in general. This
change will rewrite the while loop to an infinite loop and remove the
exclamation symbol (!) from the if condition.
Upgrading the version of vsftpd is not helpful here because
vsftpd_3.0.3-11 (Ubuntu 18.10) didn't resolve it yet.
Change-Id: I07382709c33bd9bab61fcea76ab7deca5f630084
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The bool is assigned on the previous line: QTRY_VERIFY will not do
anything because the statement is already true.
Change-Id: I067290e19ffd100819b2b631af431c6013623a00
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It was an implicit effect before which stopped working after
dec7961709. Reintroduce it as some
projects used this side-effect as a way to abort the initial
highlighting.
Change-Id: I5340ee9882a242bc8b5f7f843f1cfe793a65d357
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
When debug_and_release option is in use, qmake will generate one
mata-Makefile and two additional leaf Makefile (Makefile.Debug and
Makefile.Release). In such case, testserver.pri will be included in all
three passes. The problem is that the mata-Mafile is used to invoke leaf
Mafile recursively. The docker test server should only be integrated in
the leaf Makefile.
To resolve this problem, this change uses "!build_pass" condition to
determine whether this is a pass of meta-Makefile, and then skip it.
Change-Id: Ibc48d657680e089ebaa1bc356b87eb4cfd9f4580
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
tr() recognizes %n and %Ln. it offers no way to escape lone percent
signs, which implies that they must be interpreted verbatim, which is
what the code actually does. except that it would run off the end if the
% appeared at the end of the string.
Fixes: QTBUG-57171
Done-with: Mateusz Starzycki <mstarzycki@gmail.com>
Change-Id: Icf81925c482be1ea66ec8daafb3e92ad17ea7fab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Its filePath() and absoluteFilePath() don't trust its own
isAbsolute(), due to some infelicities on MS-Win; and kludged round a
consequent problem with resource paths; but other virtual file systems
weren't catered for. Replace the convoluted test there with a static
bool function (so that future kludges in this area shall only need to
edit one place; and can document why they're needed) and use a more
robust test that handles all virtual file systems (by asking
QFileInfo) but falls back to QFileSystemEntry to work round the known
infelicities on MS-Win. Add regression test for asset library paths
issue on iOS. Ammends 27f1f84c1c.
Moved a couple of local variables to after the early return, since it
doesn't need them, in the process.
Task-number: QTBUG-70237
Change-Id: Ib3954826df40ccf816beebe5c3751497e3bf6433
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
When using the overload of QCoreApplication::processEvents that takes a
maxtime argument, the function will keep processing events until there
are no more events, or until it times out.
The problem is that the function doesn't distinguish between events that
were on the event queue when the function was called, and events generated
by processing events as part of its own execution. If for example a widget
calls update() in its paintEvent, the function will spin for the entire
duration of maxtime.
That doesn't work for qWaitFor, where we need to check the predicate
between each pass, so we use the overload of processEvents that doesn't
take a maxtime. That's fine, as we have our own timeout logic.
Change-Id: I9738d7d0187c36d4a5ddfcd3fd075b0bd84583c4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
... as we normally do in other tests, using localhost.
Change-Id: I7969d7bfd50b545adae7e23476d17b6224e9a8fc
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The tests of smb protocol only work in the CI network. Therefore,
the docker-based test server for Windows can't pass all the tests of
QNetworkReply.
These two tests should be reworked when adding Samba server to the
docker-based test servers later on.
Task-number: QTBUG-72861
Change-Id: I54e639b5414760ee929d0d28fe10f9e021aff7dc
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
As the mnemonic has no meaning when it is in a dockwidget title, we
should just treat it as a literal ampersand instead and display it
as such.
Fixes: QTBUG-54485
Change-Id: I96c856ce2771a68d226f48f8f47affc24f1c53cd
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This makes it possible to get rid of specialized functions for
converting to RGBA64PM, while at the same time making the conversion
faster as the painter routines are better optimized.
Change-Id: I3e73856b2c1411977450e72af1741aab0ecf537e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This allows anticipating and reusing internal allocations of
QPainterPathElements instead of using the common `m_myPath = QPainterPath{}` pattern.
[ChangeLog][QtGui][QPainterPath] Added clear(), reserve(), capacity().
clear() removes allocated QPainterPath elements but preserves allocated memory, which can be
useful for application with complex paths that are often recreated. reserve() and capacity()
follow QVector semantics.
Change-Id: I763461e2a421feda9053d3eb512af2fcf07ade2b
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The refactoring of dnd with f8944a7f07
added a regression which results in a need to reimplement
dragMoveEvent() on the drop side. Before this change it was possible to
accept the dnd in dragEnterEvent() without again accepting it in
dragMoveEvent().
Fix it in a similar way it's done in
QGuiApplicationPrivate::processDrag() by prefilling the first simulated
QDragMoveEvent with the values from the previous QDragEnterEvent before
it is sent to the drop receiver.
Fixes: QTBUG-72844
Change-Id: I1300dd02b7f1d9dcd44ecefa8335f92ad6c6cafa
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
qtbase/src/corelib/kernel/qmetatype.cpp: In static member function ‘static void QMetaType::destroy(int, void*)’:
qtbase/src/corelib/kernel/qmetatype.cpp:2599:27: error: ‘info.QMetaType::m_destructor’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (m_typedDestructor && !m_destructor)
~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
qtbase/src/corelib/kernel/qmetatype.cpp:1868:15: note: ‘info.QMetaType::m_destructor’ was declared here
QMetaType info(type);
^~~~
qtbase/src/corelib/kernel/qmetatype.cpp:2600:26: error: ‘info.QMetaType::m_typedDestructor’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
m_typedDestructor(m_typeId, data);
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
qtbase/src/corelib/kernel/qmetatype.cpp:1868:15: note: ‘info.QMetaType::m_typedDestructor’ was declared here
QMetaType info(type);
^~~~
The extended (not inlined) function may be called on a half
initialized invalid instance.
Change-Id: I26d677a8ad2bd0c5846233f06393e774d377936d
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also blacklist tst_QRawFont::unsupportedWritingSystem() and
tst_QGlyphRun::mixedScripts() on windows for now.
Conflicts:
qmake/generators/makefile.cpp
src/corelib/itemmodels/qstringlistmodel.cpp
src/platformsupport/fontdatabases/windows/qwindowsfontengine_p.h
tests/auto/corelib/itemmodels/qstringlistmodel/tst_qstringlistmodel.cpp
tests/auto/gui/text/qglyphrun/BLACKLIST
tests/auto/gui/text/qrawfont/BLACKLIST
Task-number: QTBUG-72836
Change-Id: I10fea1493f0ae1a5708e1e48d0a4d7d6b76258b9
When a button added to QMessageBox has AcceptRole or YesRole, the signal
accepted() will be emitted upon click on the button. If the button has
RejectRole or NoRole, the signal rejected() will be emitted upon click
on the button. If a button has a different role, neither accepted() nor
rejected() will be emitted. This works for both standard and custom
buttons.
The signal finished() with result code will be sent regardless of a
clicked button role.
Also added documentation strings for some methods of private classes in
order to have better tooltips in IDE(s).
Task-number: QTBUG-44131
Change-Id: I521a4e5112eb4cf168f6fbb4c002dbe119aeeb09
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This reverts commit c1fc47b06a.
CI is now running on 18.04 hosts and vmx is enabled on that level.
As the update in QTQAINFRA-2288, the macOS 10.13, openSUSE 42.3
and Ubuntu 18.04 had vmx enabled inside the VM.
Change-Id: I6ec4094ca826418f46f417b3cab89678bb089417
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The function is setting the brushes correctly in the return value, but
without updating the resolve_mask, making it return wrong results in
functions like isBrushSet or the debug operator.
Added a unit test for the member function, since the class is still
mostly untested, and clarified the reference documentation of what the
function is supposed to do.
Change-Id: Iaa820dc44f095e125f9375cb00da5569986803c6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The keyboard search in QAbstractItemView did not handled Key_Space
because this is also an edit trigger. It was also consumed if no edit
was started.
This patch changes this behavior and triggers the keybaord search when
the editing was not started.
Fixes: QTBUG-48505
Change-Id: I58e0d283f863c9b12ac5d2f6171f15522bd7c30a
Reviewed-by: David Faure <david.faure@kdab.com>
The keyboard navigation did not consider the disabled state when trying
to find the new index under all circumstances. This lead to a
non-working PageUp/Down/Home/End navigation when the first or last item
was disabled or hidden.
Fix it by explicitly checking if the calculated item is hidden/enabled
and skip it in this case.
Fixes: QTBUG-44746
Fixes: QTBUG-34832
Change-Id: Ifa3b64a405e67b792db5db9d186d426fcfe183fb
Reviewed-by: David Faure <david.faure@kdab.com>
