Drive-by change: use UTF-16 instead of UTF-8 for Eastern Arabic
Numerals, both are not human-readable but UTF-16 is one code point
instead of the two for UTF-8, less \x.
Pick-to: 6.5
Change-Id: I721f3989b7d776ddc4f9d337b21dca9d398fcc0d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Constructing from const char* etc is already covered by
constructorQByteArray.
I took a guess that the "// b(10)" comment is about testing constructing
a QString from a QChar[] that has an explicit \0 charcater. I tried
finding what the initial intent was but the trail went cold at the
"Initial import from the monolithic Qt" commit.
Pick-to: 6.5
Change-Id: I15bcdb24e55286eb6cd3056af0714a1eed581635
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise, double-click recognition will fail.
Use QEvent::clone when possible, or set the timestamp explicitly when
not.
As a drive-by, remove some long-dead code in affected code lines.
Fixes: QTBUG-102010
Pick-to: 6.5 6.4 6.2
Change-Id: I882bf6e8090bf6f182b7a0a3c62aa3a4c8db2e14
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
I.e. the second arg to QCOMPARE isn't what's being tested.
Drive-by changes:
- More _L1 usage, less blocky and easier to read
- QCOMPARE's second arg can be a View, it is smart enough and can
compare them just fine
- Replace a "//15 chars" comment with a QCOMPARE check
Pick-to: 6.5
Change-Id: I4f4b84b16b543df37b0ba2f9dd781b045b2ed397
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As of macOS 10.14 the keyboard assistant background is shipped as part
of the compiled asset catalog of the app, so looking it up via a URL
will fail.
Instead we look it up via NSBundle's dedicated image lookup function,
which handles both cases.
The logic has also been moved to qwizard.cpp, since the additional
plumbing via QPlatformNativeInterface was unnecessary.
The keyboard assistant itself no longer shows the background image
as of macOS 12, so we might consider doing the same, but the design
of the assistant has also changed significantly, so as long as our
QWizard layout looks like the old keyboard assistant we keep the
background as well.
Pick-to: 6.5 6.2
Change-Id: I7d42dd79b285f3518837458864bca6bc353b3b6d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
- Port macros to QTest data rows in separate unittests
- Move DOUBLE_TEST-related data to toDouble() unittest
- Drop one redundant unittest:
QTest::newRow("const-charstar") << (const char*)0;
Pick-to: 6.5
Change-Id: Ie809895e9f5d58c2d3ec419689f409b55e24fcf7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And switch to using test data rows (rooting out two macros in the
process).
Pick-to: 6.5
Change-Id: Ib31e6b59f90f0983c0efc4bef7cb246aedfcab5b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change test data to compile with NO_CAST_FROM_ASCII uncoditionally where
casting from ASCII isn't what's being tested by a unittest.
The goal is to add a variant of tst_qstring that is compiled with
QT_NO_CAST_FROM_ASCII so that the unittests cover that code path too.
The commits are split into smaller chunks (where there is a common
link between changed code, that code is put in a commit, otherwise I
kept the number of changed lines below ~150) to make reviewing them
easier.
Pick-to: 6.5
Change-Id: I14256f1bde7749a3023753dbb7ed8be72cb6bc14
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Amends 17c1ebf8bf, after which dragEnabled
item views toggled selection on click rather than on press. If the edit
trigger included SelectedClicked at the same time, then Ctrl-Clicking a
selected item would start editing the item, instead of toggling
selection.
Fix this by ignoring clicks with modifier when evaluating whether
editing should start.
Extend the mouseSelection test case by including a column for the
editTrigger, and cover the respective combinations.
Fixes: QTBUG-111131
Pick-to: 6.5 6.4 6.2
Change-Id: I9605f9b3d5a49e292551a34c3c4c7a5f9ecb2a89
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
`QStatusBar::removeWidget` was hiding the wrong widget (the next one),
since the `removeAt` call changed the item that the `item` variable
is referencing.
This fixes a regression in Qt 6.3.0 (7166a82844).
Pick-to: 6.5 6.4
Change-Id: I9977b47e6208f8d451ff1037bcb9f4e8414cb431
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thorbjørn Lindeijer <bjorn@lindeijer.nl>
Not clearing the continuationData could lead to use-after-free when
there is an attempt to cancel an already finished future, which belongs
to an already-destroyed promise.
This patch fixes it be explicitly resetting continuationData to nullptr
in the clearContinuation() method, which is called from the QPromise
destructor.
Task-number: QTBUG-103514
Pick-to: 6.5 6.4 6.2
Change-Id: I6418b3f5ad04f2fdc13a196ae208009eaa5de367
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
A recent update moved handleScreenChange out of being a private slot.
Porting to the new syntax fixes the warning and moves to a compile-time
check.
Pick-to: 6.5
Change-Id: Ibd85c6caf7dca051d669250a94a82fbddbd3435d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
An effort has been made to support more keyboard layouts that provide
dead keys (US international, Mac-specific dead keys).
The dead key is translated now at the event conversion phase, not
when it is actually used for modifying keys, which simplifies the logic.
Unittests have been created to check the translation mechanism.
Fixes: QTBUG-86272
Change-Id: I07f7d63f5a37f8469c693b034b400da99379f519
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
It's completely unnecessary, since QFileInfo will query the file system
anyway and that has a much better view of what is normalized and what
isn't. More importantly, this fixes the mistake in failing to normalize
properly in removePaths(), which removed the ending slash of a root
directory such as "C:\\". That caused the path to become "C:", which
QFileInfo interprets as "current path on drive C:".
[ChangeLog][QtCore][QFileSystemWatcher] Fixed a bug that prevented
removePaths() from removing the root of a drive on Windows.
Fixes: QTBUG-110986
Pick-to: 5.15 6.2 6.4 6.5
Change-Id: I9671dee8ceb64aa9b9cafffd17419b6d69670876
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test needs investigation. Skip it for now so that we can enable
CI for WASM but leave a note to investigate it.
Task-number: QTBUG-109954
Change-Id: I9448312c2c16ec4f31279dcbe4e2213681cabe8a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The code for the QMetaMethod queuedConnectionTypes overload relied on
QMetaMethod::parameterMetaType and QMetaType::flags() to detect whether
we're dealing with a pointer (and then use the VoidStar metatype instead).
However, if the type was incomplete when the slot was defined, and the
type was not registered when connect was called, we would not find a
metatype for the argument.
However, in that case we might still be able to handle the method, by
checking whether the type name of the arguments ends with a "*".
This patch does that, fixing a regression from 5.15.
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-108537
Change-Id: I54cc48a3343444480ab9094fe1ebaaa5aa75cee0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When SPIRV-Cross encounters a GLSL storage buffer runtime sized array,
it generates MSL code which expects a "buffer size buffer" containing a
list of storage buffer sizes to be bound. This patch adds RHI backend
support for Metal "buffer size buffers" on compute and graphics
(including tessellation) pipelines. Includes unit tests.
An accompanying patch to qtshadertools is required.
Change-Id: I9392bfb21803e1a868d7de420fedc097a8452429
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
With the introduction of a new atomic variable the users should use the
class QNtfsPermissionCheckGuard or the helper functions
- qEnableNtfsPermissionChecks()
- qDisableNtfsPermissionChecks()
- qAreNtfsPermissionChecksEnabled()
to enable/disable permission checks instead of manually managing the
variable qt_ntfs_permission_lookup (which is a non-atomic variable and
as such prone to data races).
Also moved the variable qt_ntfs_permission_lookup to qfile.h to make it
clash with the user-side declarations the documentation suggested to
use (and it is probably also a better fit thematically anyway).
[ChangeLog][QtCore][Deprecation Notice] Deprecated the variable
qt_ntfs_permission_lookup to avoid race conditions while enabling or
disabling permission checks. It can be replaced by the RAII class
QNtfsPermissionCheckGuard or with the functions
qEnableNtfsPermissionChecks(), qDisableNtfsPermissionChecks() and
qAreNtfsPermissionChecksEnabled().
Fixes: QTBUG-105804
Change-Id: I93a563864ffb3f9945551c34004d8ca393603b25
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
If a slot connected to a QMenu-action destroys the QMenu, then
we must not touch data members in subsequent code, and instead return
immediately.
We cannot use QBoolBlocker here, as that would reset the data
member of QMenuPrivate even when trying to return early.
Fixes: QTBUG-106718
Pick-to: 6.5 6.4 6.2
Change-Id: I6b5ea471b1bf1f9864e1384382100f8f6c01346f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
dfb4697e4a made a change to selection
behavior that resulted in a regression where clicking on an item view
but not on an item would cause the current item to get unselected.
Changes the behavior to not update in this case.
Added a new test that specifially checks for this scenario and ensures
that the current item is still selected, even after the user clicks on
empty area.
Fixes: QTBUG-105870
Pick-to: 6.2 6.4 6.5
Change-Id: I191c3878819b99897083039fba0ab43908da5429
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
I don't begin to understand the semantics of the trackers here, but
whatever they are, they break with the fallback std::swap() 3-moves
implementation and lose track of alive objects, so provide an ADL swap
that does the right thing.
Amends dd58ddd5d9 (I think).
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: I1cd49c95dca2d103a26c2c7ac0a896929135a6c8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
A RAII wrapper around Qt::{begin,end}PropertyUpdateGroup().
[ChangeLog][QtCore][QScopedPropertyUpdateGroup] New RAII class
wrapping Qt::beginPropertyUpdateGroup() and
Qt::endPropertyUpdateGroup().
Fixes: QTBUG-110710
Change-Id: If2619e9584dd9d57985d63e3babca75421499ab9
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The "Private Use Area" are subsets of Unicode which are not
considered regular characters, but reserved for fonts to provide
custom glyphs.
If these were used and the main font did not have support for them,
we would look them up in other fonts and sometimes display an
arbitrary selection of glyphs, based on whatever existed on the
platform. This is unexpected and different from how native apps
work on Windows, for instance.
[ChangeLog][QtGui][Text] Font merging (automatic assignment of
alternative fonts) is no longer applied for characters in the
Private Use Areas of Unicode.
Pick-to: 6.5
Fixes: QTBUG-110502
Change-Id: Id2c63786aafda59bf170e0d7263eb78a391fe46d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
And don't use toLower() as QString::compare() and QCollator::compare()
can compare case-insensitively.
Change-Id: I999d787cb77e10a101da75d1bf0a5baf096a5c9b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I.e. don't detach in the replace() overloads that delegate to
replace_helper() if this string is shared, instead create a new string
and copy characters from this string to it, along with the "after"
string, then swap it with this.
Do the same thing if "before" is shorter than "after" and there isn't
enough capacity to do the replacement without reallocating.
Use std::copy* and std::move*, which will both fallback to
memmove/memcpy, but they have C++ API, which is more readable.
[ChangeLog][QtCore][QString] Using replace() on a currently shared
QString is now done more efficiently
Task-number: QTBUG-106184
Change-Id: If74ffa1ed47636dc23d543d6dc123d8f2b21d537
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Utf8 data is variable-width, ideally we want to write characters at most
once, so insert directly into the QString buffer if inserting at the end
(by delegating to append(QUtf8SV)), and use an intermediate buffer to
hold the converted data before inserting anywhere else.
Task-number: QTBUG-108546
Change-Id: Iabfaeecaf34a1ba11946bd67951e69a45d954d6d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of detaching when the string is shared, or if the the insertion
would cause a reallocation, create a new string and copy characters to
it as needed, then swap it with "this" string. This is more efficient
than detaching which would copy the whole string before inserting, as
some characters would be copied multiple times.
Use detachAndGrow(), otherwise QStringBuilder unitests fail:
PASS : tst_QStringBuilder1::initTestCase()
FAIL! : tst_QStringBuilder1::scenario() 'prepends < max_prepends' returned FALSE. ()
Loc: [tests/auto/corelib/text/qstringbuilder/qstringbuilder1/stringbuilder.cpp(61)]
PASS : tst_QStringBuilder1::cleanupTestCase()
The issue is that now when inserting, if the string is going to
reallocated, we create a new string, so the freeSpaceAtBegin()
optimization doesn't work the same way.
void checkItWorksWithFreeSpaceAtBegin(const String &chunk, const Separator &separator)
{
// GIVEN: a String with freeSpaceAtBegin() and less than chunk.size() freeSpaceAtEnd()
String str;
int prepends = 0;
const int max_prepends = 10;
while (str.data_ptr().freeSpaceAtBegin() < chunk.size() && prepends++ < max_prepends)
str.prepend(chunk);
QVERIFY(prepends < max_prepends);
...
...
each str.prepend() would have reallocated.
[ChangeLog][QtCore][QString] Calling insert() on a currently shared
string is now done more efficiently.
Task-number: QTBUG-106186
Change-Id: I07ce8d6bde50919fdc587433e624ace9cee05be8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the object is shared, instead of detaching, copy characters from
"this" to a new object except for the chacters that would be erased,
this is more efficient than detaching (which would copy the whole data
then erase).
- Extend tst_QString::removeIf() to catch a corner-case (that I saw
with tst_QByteArray::removeIf()).
- Add q_uninitialized_remove_copy_if, which works like
std::remove_copy_if but for uninitialized memory like
q_uninitialized_relocate_n (but copies rather than relocates/moves).
With the same static_assert from q_relocate_overlap_n that the type
destructor is non-throwing.
Added q_uninitialized_remove_copy_if in this commit rather than a
separate one so that it's unittested by its usage in eraseIf().
[ChangeLog][QtCore][QString, QByteArray] Removing characters from a
currently shared string or byte array is now done more efficiently
Task-number: QTBUG-106181
Task-number: QTBUG-106183
Change-Id: Icc0ed31633cef71d482b97e0d2d20d763163d383
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A QVariant(QString) was not convertible to an enum not registered with
Q_ENUM() which worked fine in Qt5.
The same problem exists for QVariant(enum) to QString.
Fix it by not bailing out when no metatype for the enum was found and
try to convert it to a qlonglong instead (which is then correctly
converted to the enum type).
Fixes: QTBUG-109744
Pick-to: 6.5 6.4
Change-Id: Ie7bb016a860455b69508f0f46b36474c9c294f3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implemented assign() methods for QVarLengthArray to align
with the criteria of std::vector, addressing the previously
missing functionality.
Reference:
https://en.cppreference.com/w/cpp/container/vector/assign
[ChangeLog][QtCore][QVarLengthArray] Added assign().
Fixes: QTBUG-106200
Change-Id: If671069808ff561b0f4c77b6c7f7aca360a0c663
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This fixes a use-after-free in QPropertyDelayedNotifications::notify.
Before this patch, evaluateBindings or a notify from a property index
might have caused the originalBindingData to become reallocated.
However, at that point, we've already restored the original bindingData
in evaluateBindings, so we won't track updates, and thus won't adjust
originalBindingStatus, which will then point to already freed data.
To remedy this, we no longer do the notification with data fetched from
originalBindingData, but instead use the information we have in the
proxyData.
We also need to enure that referenced bindings do not get deleted; for
that we keep the PendingBindingObserverList alive for the whole duration
of the endPropertyUpdateGroup.
As we now have the PendingBindingObserverList, we use it for the
notification logic, and only notify change handlers in
QPropertyDelayedNotifications::notify. That will allow a follow-up
cleanup of QPropertyObserverPointer::notify, and aligns the logic for
grouped updates with the logic for "nornal", non-grouped updates.
Amends f1b1773d0a.
Task-number: QTBUG-110899
Pick-to: 6.5 6.4 6.2
Change-Id: Iae826e620d9614b7df39d86d8a28c48c8a5c4881
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
That use case for the class never materialized, and it was actually
meant for internal use. However, we put it into the public header, so
we cannot remove it (and while undocumented, someone actually used it at
some point, compare e4d62651c2).
Mark it as deprecated instead so that it can be finally be removed in Qt
7.
Change-Id: I058c5831a44610121fbec6eaddebd8b33d4a16c9
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
qt_ntfs_permission_lookup is a global, non-atomic variable which
could cause problems in case of multiple threads. Introduce a
new atomic variable to handle permission lookups but instead of
manual incrementation/decrementation, implement a class to manage
the variable.
Since the atomic variable is not directly available to the user,
implement helper functions to increase/decrease/check the status
of the variable.
Task-number: QTBUG-105804
Change-Id: If6cbcdd653c7f50ad9853a5c309e24fdeb520788
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Introduce the qt-cmake-create script. The script generates the simple
CMakeLists.txt based on the source files located in the current or
specified directory. The initial version can generate a CMake code for
the following file types:
- .c .cc .cpp .cxx .h .hh .hxx .hpp - generates the qt_add_executable
call with prerequisites.
- .qml .js .mjs - generates the qt_add_qml_module call with
prerequisites.
- .ui - adds the found ui files to the existing executable. Requires
C++ files be present in the directory too.
- .qrc - generates the qt_add_resources call and adds the resources
to the existing executable. Requires C++ files be present in the
directory too.
- .proto - generates qt_add_protobuf call with prerequisites.
The QtInitProject.cmake script contains the 'handle_type' function that
allows extending the script capabilities and establish simple relation
chains between the file types.
Note: The initial implementation doesn't deal with sub-directories, so
all files from sub-directories will be added to and handled in the
top-level CMakeLists.txt file. This can be extended by user request.
Task-number: QTBUG-104388
Change-Id: I5abd9e07da109e867ff95986572ed2bf02ef9d3d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The adaptor is a server-side implementation that must exist anyway and
is called by the QtDBus runtime. We don't want warning on the server
side because it must call those methods to implement the client API.
Since we have the XML introspection saved in a class property anyway,
the runtime won't be inspecting the method tags to see if
Q_DECL_DEPRECATED is there, to add to the XML (which it isn't
generating).
Pick-to: 6.5
Change-Id: I9671dee8ceb64aa9b9cafffd17416596135d26ca
Reviewed-by: David Faure <david.faure@kdab.com>
Commit 93dad2bf91 (6.0) changed
Q_DECL_DEPRECATED to use the [[deprecated]] attribute, which must appear
before inline and other keywords.
To keep it next to Q_NOREPLY, I also moved the "inline" into the next
string.
Added missing tests for both.
Pick-to: 6.2 6.4 6.5
Fixes: QTBUG-110979
Change-Id: I9671dee8ceb64aa9b9cafffd1741656e86f40453
Reviewed-by: David Faure <david.faure@kdab.com>
This addresses two different issues:
- Firstly, we were casting the resolved binding data pointer to
QPropertyProxyBindingData, instead of the d_ptr of
QPropertyBindingData. Fix this by introducing a helper function,
and consistently using it to access the proxy data.
- Secondly, we were not resetting the originalBindingData when the
pointed to object was destoyed. Fix that, too.
Pick-to: 6.5 6.4 6.2
Task-number: QTBUG-110899
Change-Id: I7691c9df5cc26e761f6b0e5f16d152f7f2183208
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
New languages (and one local for each) added with v42
- Haryanvi
- Moksha
- Northern Frisian
- Obolo
- Pijin
- Rajasthani
- Toki Pona
It also appears that Canada has changed its date format. Modify the
relevant test case to reflect this change.
Task-number: QTBUG-110333
Pick-to: 6.5
Change-Id: Ia8975c2866cd54c9e565543d05bacd52f4987909
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- The optional nice-to-haves DebugMarkers, Timestamps, PipelineCache
are not yet implemented (features reported as false, to be
implemented later, although buffer/texture resource name setting
already works as-is, regardless of DebugMarkers).
- Mipmap generation for 3D textures is missing. Won't matter much
given that 3D textures are not used in Qt for anything atm. For
generating mipmaps for 2D (or 2D array) textures, the MiniEngine
compute shader and approach is used. 3D support for the mipmap
generator may be added later. 1D textures / arrays are supported
except for mipmap generation, and so the
OneDimensionalTextureMipmaps feature is reported as false.
- Qt Quick and Qt Quick 3D are expected to be fully functional.
(unforeseen issues are not impossible, of course)
- Uses minimum feature level 11.0 when requesting the device. It is
expected to be functional on resource binding tier 1 hardware even,
although this has not been verified in practice.
- 2 frames in flight with the usual resource buffering
(QRhiBuffer::Dynamic is host visible (UPLOAD) and always mapped and
slotted, other buffers and textures are device local (DEFAULT).
Requests 3 swapchain buffers. Swapchains are mostly like with D3D11
(e.g. FLIP_DISCARD and SCALING_NONE).
- The root signature generation is somewhat limited by the SPIR-V
binding model and that we need to map every binding point using the
nativeResourceBindingMap from the QShader. Thus the root signature
is laid out so each stage has its own set of resources, with shader
register clashes being prevented by setting the visibility to a
given stage.
Sampler handling is somewhat suboptimal but we are tied by the
binding model and existing API design. It is in a fairly special
situation due to the 2048 limit on a shader visible sampler heap, as
opposed to 1000000 for SRVs and UAVS, so the approach we use for
textures (just stage the CPU SRVs on the (per-frame slot) shader
visible heap as they are encountered, effectively treating the heap
as a ring buffer) would quickly lead to having to switch heaps many
times with scenes with many draw calls and sampledTexture/sampler
bindings in the srb.
Whereas static samplers, which would be beautiful, are impossible to
utilize safely since we do not have that concept (i.e. samplers
specified upfront, tied to the graphics/compute pipeline) in the
QRhi API, and an srb used at pipeline creation may change its
associated resources, such as the QRhiSampler reference, by the time
the shader resources are set for the draw call (or another,
compatible srb may get used altogether), so specifying the samplers
at root signature creation time is impossible.
Rather, the current approach is to treat each sampler as a separate
root parameter (per stage) having a descriptor table with a single
entry. The shader visible sampler heap has exactly one instance of
each unique sampler encountered during the lifetime of the QRhi.
- Shader-wise no different from D3D11, works with HLSL/DXBC 5.0
(i.e. existing .qsb files with DXBC in them work as-is). But unlike
D3D11, this one will try to pick 6.7, 6.6, ..., down to 5.0 from the
QShader, in that order.
- Uses D3D12MA for suballocating. As a result it can report vmem
allocation statistics like the Vulkan backend, and it does more
since the DXGI memory usage (incl. implicit resources) is also
reported. This is optional technically, so we also have the option
of going straight with the heavyweight CreateCommittedResource()
instead. That is what we do if the adapter chosen reports it's
software-based or when QT_D3D_NO_SUBALLOC=1 is set.
- PreferSoftwareRenderer (picking the WARP device) and the env.var.
QT_D3D_ADAPTER_INDEX work as with the D3D11 backend.
- It is not unexpected that with large scenes that generate lots of
draw calls with multiple textures/samplers per call the performance
may be slightly below D3D11 (probably mostly due to descriptor
management). Similarly, the reported memory usage will be higher,
which is partly natural due to creating heaps, descriptor pools,
staging areas, etc. upfront. Will need to be evaluated later how
these can be tuned.
Change-Id: I5a42580bb65f391ebceaf81adc6ae673cceacb74
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Failing test functions fastMove, moveAccross, moveInOutOverlapped seem
to be stable in the meanwhile. This patch removes the blacklisting.
Task-number: QTBUG-109036
Pick-to: 6.5
Change-Id: I9a2b015572e4d8a4eac196d3985c052030fd84e2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The new name better matches the names of existing functions there.
A comment on the old code noted that such a move should really be
done, so as to correctly share the environment-mutex locking.
In the process, move the (now three) time-related internal functions
from qglobal_p.h to a new qtenvironmentvariables_p.h since that's the
natural place for them given where they're defined (and the fact that
they're for internal use only).
Change-Id: Ib028baebaf31a806a2c0c97caaaba0a466c11cea
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We must check that the path is an actual file on the filesystem before
using native APIs. This regression was introduced by commit
047d8f36de.
[ChangeLog][QtCore][QMimeDatabase] Fixed a regression from 6.4.0 that
made certain QMimeDatabase functions that inspected file contents to fail
on Unix systems, if the file was not a native file (e.g., a Qt resource).
Fixes: QTBUG-110707
Pick-to: 6.4 6.5
Change-Id: I570832c9ac8b4e03bde8fffd173f7b4c6b164192
Reviewed-by: Igor Kushnir <igorkuo@gmail.com>
Reviewed-by: David Faure <david.faure@kdab.com>
This test is calling mimeTypeForFileNameAndData(), so it doesn't
actually use the files.
Change-Id: I570832c9ac8b4e03bde8fffd173f77f138ef3434
Reviewed-by: Igor Kushnir <igorkuo@gmail.com>
Reviewed-by: David Faure <david.faure@kdab.com>
When calling a ctor this way, an object is created in the memory pointed
to by _a[0] using the other arguments for the ctor.
This allows separate allocation and initialization of an object through
the metaobject system.
Fixes: QTBUG-108879
Change-Id: Ifb154373ee42faab281cfb62aa14334980ec6b7d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The QChar::toLatin1() args in:
str.replace(index, len, QChar(after[0]).toLatin1())
s2.replace(ch.toLatin1(), after, cs)
will be converted to QChar, so it's always calling the same QString
overload, I argue that we're not testing QChar implicit conversions
here.
Change-Id: I3962cab2b34684f970638575e6bd15dd1067a8c6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The fact that read-access is always included makes a bool readWrite
property a little awkward to document and explain. An AccessMode enum
with values ReadOnly and ReadWrite is much easier, and will also lend
itself more easily as a constructor argument than a boolean.
Found in API review.
Pick-to: 6.5
Change-Id: I4f20dbe9f19c7bdb52248a6e544e36d731d5a2ee
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The aim is to have fewer files including <windows.h>.
Pick-to: 6.5
Task-number: QTBUG-109394
Change-Id: Id9cc08f54b5daf6d7e317fad27036dc2efaacbb8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This is a continuation of commit 5c9d671bfb.
[ChangeLog][QtCore][QStandardPaths] Improved conformance to the
Freedesktop basedir spec by ignoring any relative paths in XDG_*
environment variables.
Fixes: QTBUG-58043
Change-Id: I7c34143ced97d6d3de6ecbf13bccf9e935462d1e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test function used only the left button to test mouse event
propagation.
This patch adds the right and middle buttons to the test data.
Task-number: QTBUG-110055
Pick-to: 6.5 6.4
Change-Id: I02683168216843919e889987a8b0e8a0f1592d3a
Reviewed-by: Doris Verria <doris.verria@qt.io>
It causes clashes in CMake Unity (Jumbo) builds.
Change the function to be Q_AUTOTEST_EXPORT'ed helpers.
Pick-to: 6.5
Task-number: QTBUG-109394
Initial-patch-by: Amir Masoud Abdol <amir.abdol@qt.io>
Change-Id: I2e4032e07e1c39432cae1eb2dfff94be33846c09
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When the match finds a surrogate pair as the first true Unicode character,
then we need to skip both code units of the pair in order to restart the
search. PCRE2 does not allow us to search for individual UTF-16 code
units.
That actually means that counting "." gives us the count of Unicode
characters.
Fixes: QTBUG-110586
Pick-to: 5.15 6.2 6.4 6.5
Change-Id: I194d0a32c94148f398e6fffd173d5b5be8137e19
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Note: This requires an update to the tst_qtextlayout test, because
the test assumed that the Arabic string would always yield a run
of two glyphs. This was a side effect of how Harfbuzz handled
Qt's test font, which has zero font tables and cannot be used for
shaping. With the Harfbuzz update, the Arabic text here yields a
single cluster instead, which actually makes more sense, so the
test has been made a bit more robust to support both cases.
Pick-to: 6.2 6.5
Task-number: QTBUG-110338
Change-Id: I93d4cf8e3046dc93224e144d4c81d86bef4918d1
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If the string is shared, instead of detaching, create a new string and
copy the characters from this string, replacing the ones matching "before"
with "after", to the new string.
Change-Id: I2c33690230d40f3121e60e242666460559258b7b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
TIME_NOSECONDS doesn't really switches to short time format,
just removes the seconds from long time format
Fixes: QTBUG-110627
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: Ie799958f3942c657f00bc8196588258661ddc1d9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It seems that on macOS 13.2 and newer, it requires explicit activation,
just as on the offscreen and minimal platforms.
Pick-to: 6.5 6.4 6.2
Task-number: QTBUG-110703
Change-Id: I519eec872505ea3673111ae300c2494113f85c36
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This reverts commit cebcb7991a.
Reason for revert: We need to enable BIC tests again
Pick-to: 6.5
Change-Id: Ibabe2c50547972d040d933a1027833426b018e81
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Says Clang 15:
tst_qurlquery.cpp:193:11: warning: explicitly moving variable of type 'QUrlQuery' to itself [-Wself-move]
moved = std::move(moved);
~~~~~ ^ ~~~~~
It's amazing how little it takes to throw this warning off guards:
just use an alising reference instead of the same variable. Makes you
wonder whether the time spent on detecting such trivialities in the
compiler is really well spent.
Amends fc8dad2f10.
Pick-to: 6.5
Task-number: QTBUG-109842
Change-Id: I165af2a786aa0ba28b8dcd039a500f3494bc29a9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of the System V one. An important difference is that
QSharedMemory does not clean after itself.
Updated the configure summary output to include this information.
Drive-by update to sorting order and I removed cpp-winrt from the
listing because there's a warning at the end if it is not set.
Change-Id: I12a088d1ae424825abd3fffd171e0eadcfd33426
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If a previous test in the same process or previously leaked a shared
memory or semaphore handle, tests could fail and cascade down. They
could also interfere with one another. So prevent this issue by
assigning a monotonically-increasing identifier per test function or row
tested and improving how we clean up those we did create.
This shows we need the API to explicitly clean up.
Change-Id: I12a088d1ae424825abd3fffd171db61d6b68a411
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
And deprecate the non-native key support API. Qt 7 may not even store
the old, non-native key.
Documentation in a new commit, when the dust settles.
Drive-by updates to the tst_QSharedMemory::attach row names, to fix
grammar and remove spaces and apostrophe.
Change-Id: I12a088d1ae424825abd3fffd171d3025c77f94d2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
And deprecate the non-native key support API. Qt 7 may not even store
the old, non-native Qt.
Documentation in a new commit, when the dust settles.
Change-Id: I12a088d1ae424825abd3fffd171d2b549eeed040
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Common to both QSharedMemory and QSystemSemaphore, this will hold the
native key and will replace the concept of non-native key in those
classes.
Change-Id: Id8d5e3999fe94b03acc1fffd171c03197aea6016
Reviewed-by: Nicholas Bennett <nicholas.bennett@qt.io>
This removes the second portion of the #if mess of shared code between
QSharedMemory and QSystemSemaphore for SystemV.
Change-Id: Id8d5e3999fe94b03acc1fffd171c073c2873206e
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
It's not a lot of files, but it's actually more in the same dir than
mime/ does right now. I'm about to add two more files, though I'll also
merge a few more later.
Change-Id: Id8d5e3999fe94b03acc1fffd171bfe2ea36a35a7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QWidgetTextControlPrivate::mouseReleaseEvent() has early returns
implemented, e.g. when link has been right clicked or no selection
anchor has been found. These early returns, however, still consume
the event.
This leads to events getting lost instead of getting propagated:
As an example, a QLabel with rich text uses QWidgetTextControl. While
it propagates mouse press events back to its parent, mouse release
events get lost. A QLabel with plain text propagates both events
back correctly.
This patch adds QEvent::ignore() to the early return.
Since no test class exists for QWidgetTextControl, it adds a test in
tst_QLabel.
Fixes: QTBUG-110055
Pick-to: 6.5 6.4
Change-Id: I950f8c3f135793b01c59832835bb429db2282169
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The 'WITH OIDS' was deprecated some time ago and removed with
PostgreSQL 12 so we have to adjust our test table creations. Don't know
why it was used in the first place at all.
Pick-to: 6.2 6.4 6.5
Change-Id: I6e18ac01e64368b1dd64e02bcb75fa70e05467a3
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The growBy() function takes the _increment_ of the size(), so needs to
add size() to increment for the call to realloc().
Add a test which hangs (vanilla build) or explodes (valgrind build)
without the fix.
Amends 26b227e128.
Done-with: Eirik Aavitsland <eirik.aavitsland@qt.io>
Pick-to: 6.5 6.4
Fixes: QTBUG-110412
Change-Id: I7ea91342fdcb779825c88013a3f86ba6d90ef530
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
It wasn't added when this class was created in 5.0 because we couldn't
add move constructors and still keep the ability to compile Qt with
C++98 compilers. We've forgot to correct this shortcoming since 5.6.
Fixes: QTBUG-109842
Pick-to: 6.5
Change-Id: I69ecc04064514f939896fffd17376b8243b73c52
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
If an object had elements and then was emptied, it will have a non-null
d pointer, which wasn't taken into account in the comparison.
Fixes: QTBUG-109840
Pick-to: 6.5 6.4 6.2
Change-Id: I69ecc04064514f939896fffd17376aa18184653c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This overridden function is not used and also can't be triggered by a
synthetic input event in an auto test.
Change-Id: Id8b69b440a90c18cf5870e34804fae3e6607e49f
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
This got lost during the QStringView port that happend in Qt 6.0
(commit 548dcef089) because
QString::operator+=(QStringView) does not copy the nullness of the right
side, whereas QString::operator+=(const QString &) does.
Pick-to: 6.2 6.4 6.5
Fixes: QTBUG-84315
Change-Id: Ide4dbd0777a44ed0870efffd17399b772d34fd55
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Because Python 2 reached end of life. I wonder how this even works on
macOS, as my Monterey doesn't even have "python" any more.
Pick-to: 6.2 6.4 6.5
Change-Id: Ibddb9b0ada5a4bbaa64bfffd173b239c6c4b66f3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Despite being move-only, std::vector<unique_ptr> advertizes
is_copyable:
https://quuxplusone.github.io/blog/2020/02/05/vector-is-copyable-except-when-its-not/
Our combined reallocation and resizing function, reallocate_impl(),
runs afoul of this when it uses std::is_copyable in a constexpr-if to
implement resize(n, v) without running into problems with move-only
types: the trait is true, but actual instantation runs into a
static_assert in the STL implementation.
To fix, move the problematic resize functionality out of
reallocate_impl() and into the resp. resize_impl overloads. The shrink
functionality remains in reallocate_impl(), because there are many
more users, and it only requires destructible<T>, which isn't
constraining at all.
Amends a00a1d8806.
Fixes: QTBUG-109745
Pick-to: 6.5 6.4
Change-Id: Ibc5b9cf5375108eb3d8f6c8a16d4fd02dadd73b1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
As discussed in API review, the default-constructed T() returned from
a mismatched data<T>() call is indistinguishable from a real T with
default state.
To make them distinguishable, return optional<T>. Call the new
function value<T>(), mimicking QVariant::value<T>(), and suggested in
API review, because data() is usually used to return raw pointers, not
values.
Remove the qWarning() on requestedType and actualType mismatch, as the
new function can be used in std::get_if/dynamic_cast-like if-then-else
chains, in which failure is part of the normal operation, and a
warning message misplaced:
if (auto loc = perm.value<QLocationPermission>())
~~~ use *loc ~~~
else if (auto con = perm.value<QContactsPermission>())
~~~ use *con ~~~
~~~ etc ~~~
Pick-to: 6.5
Change-Id: I799a58e930307323ebce8f9ac50a42455e9c017f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Following the QRect, add functions converting the QString to native
emscripten::val and back: fromJsString, toJsString
Change-Id: I2d0625ede3bbf7249e2e91b8de298b5b91df8ba2
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The new test:
- checks the properties of stateful Q<Typed>Permissions work
- ensures that piping a Q<Typed>Permission through QPermission
maintains state
- also ensures that assignment of a Q<Typed>Permission to a
QPermission works (via QPermission(Type) + move ctor)
Pick-to: 6.5
Change-Id: I340e49b1ecc665702ccab26d9050ca158b0e7885
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test body has been inside an #if 0 for long, remove the test
altogether. The part that loads libthai does not check anyhing
meaningful.
Task-number: QTBUG-109954
Change-Id: I8ce006a14e4cf926b668e958d4b2343f965a5fb6
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
It had various QVERIFY()s of != and >= checks: convert these to
QCOMPARE_NE() and QCOMPARE_GE() checks.
Change-Id: Ida6f7dca726187f7837da0d805549d9c582f946a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ivan Komissarov <ABBAPOH@gmail.com>
When rows are hidden (implicitly or explicitly), then their layout data
does not get fully updated. If rows get hidden after the layout data has
been calculated once, then we must make sure that their indices are
reset. Otherwise we might access array indices that are out of bounds
when the layout data structure gets resized to fit only visible rows.
For good measure, skip entirely over hidden rows when accessing the
layout data when arranging the widget.
Fixes: QTBUG-109237
Pick-to: 6.5 6.4
Change-Id: I4d6943b6a110edb61f60ce78d31f0fc64b5cc03d
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
QDateTimeEdit has such reset functions for the minimum/maximum
range properties, this makes QCalendarWidget consistent with the
simpler editors.
Fixes: QTBUG-62448
Change-Id: Iabb89f599e4996f00488a885a5b8a009471838b3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
For most territories, if we specify only that territory, we should get
a locale specific to that territory. There are exceptions for various
reasons, but check that it's true in most cases, at least. In the
process, convert two QVERIFY(... == ...) into QCOMPARE(..., ...)
Task-number: QTBUG-64940
Change-Id: I7590f20f37b0b459aafb3d1d08f6eb77932fa027
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To be extended as neeeded.
Pick-to: 6.5
Change-Id: I57d2f55f67de073fe3e4916b7ba655342cf661dc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Just describe the row instead. We'd lose the original input in case of
failure, so I added a class to print that value on destruction. Example:
FAIL! : tst_QAlgorithms::countLeading64(0) Compared values are not the
same
Actual (qCountLeadingZeroBits(value)): 63
Expected (expected) : 64
Loc: [tests/auto/corelib/tools/qalgorithms/tst_qalgorithms.cpp(374)]
QWARN : tst_QAlgorithms::countLeading64(0) Original value was 0x1
Pick-to: 6.4 6.5
Fixes: QTBUG-109958
Change-Id: I69ecc04064514f939896fffd1738b1119cd80cf8
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
tst_qstringapisymmetry needs to use the same collation testability
criteria as tst_qcollator, that is, the locales that may be tested
without ICU and not on Mac nor Windows are only the system locale and
C locale.
Task-number: QTBUG-109954
Change-Id: I69f19ae28b3a16b3827c1eee62ae59fcfdf45209
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 4096667d66.
Reason for revert: <Screen shot workaround is flaky.>
Change-Id: I6e01cc584c094d0d0b8c1544b9daf72d648dd002
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
qcollator_posix.cpp is included if ICU is not used and the OS is not
Win nor macOS. Reflect that fact in tst_qcollator instead of using
alternative means which breaks with new platforms that use the
posix collator.
Task-number: QTBUG-109954
Change-Id: I592500ce9626efbcc9377cecf6641967f978c6da
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are numerous conflicting symbols in the tst_qstringbuilder\d
variants when batching those together. Remove the linkage from symbols
by putting the common include stringbuilder.cpp in an unnamed
namespace.
Task-number: QTBUG-109954
Change-Id: Ic2a745795b57482c90c9def7667a1145cdb19854
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Due to an XCB library change, QXcbBackingStore::toImage() cannot be
safely assumed to return an image identical to QWidget::grab().
The test functions fastMove(), moveAccross() and moveInOutOverlapped()
relied on QXcbBackingStore::toImage() and failed.
They were backlisted on Linux/XCB.
This patch obtains a screen shot instead of an image from the backing
store on XCB platforms. It processes events until the screen shot
matches QWidget::grab(). It makes the test fail only if the comparison
times out.
The patch also removes the BLACKLIST file, containing only the test
functions mentioned above.
Fixes: QTBUG-109036
Pick-to: 6.5 6.4
Change-Id: I26dd5b89dc62b313db066a285f6ad7d4d92baaf2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Also replace the C array with a std::array and (some) indexed loops
with ranged-for loops. Most loops need the index in one way of
another, so can't easily be converted to ranged.
Pick-to: 6.5 6.4 6.2
Change-Id: I7fa05f22de9df6c68ec5797c9583476a3881532c
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
(Un)Register the custom recognize in init() and cleanup() instead of
initTestCase() and cleanupTestCase(), so that a new recognizer is used
for each test function.
In the test functions, use a scope guard to unregister the locally
registered recognizers to make sure that in the case of a failing test
and early return, the recognizer is removed.
Pick-to: 6.5 6.4 6.2
Change-Id: I4fe9509f35474514ef55191d799e6707199fe853
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Setting a negative line width does not make much sense, but in
earlier Qt versions, this work the same as if the line width was 0
(just give you the minimal layout given wrapping constraints).
But since 991c056438, we check if
current width > line width at an earlier point, and because 0 > -1,
we would exit immediately before adding any characters to the text
line.
To restore the behavior in earlier versions, we set the minimum
possible line width to 0.
Pick-to: 6.5
Fixes: QTBUG-109474
Change-Id: Iceadd5135681f61b30de8221853834983941c5a4
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Reviewed-by: hjk <hjk@qt.io>
Clients who called the base-class implementation in QDialog would
as a result start hitting the canBeNativeDialog code path at the
start of QDialog::setVisible(), which would show the native dialog,
but without updating the QWidget visibility state.
To keep things 100% compatible, we shuffle the implementation of
QDialog::setVisible() into QDialogPrivate, which allows us to
override it in QMessageBoxPrivate and QErrorMessagePrivate.
The existing subclasses of QDialog that override setVisible have
been left as is, to not cause any unintended behavior change.
Pick-to: 6.5
Change-Id: Icafe31a7b84a75049365e4e04b80492de08614d2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When the test is showing the error message over and over, it's not
waiting for the native dialog to actually become visible, and as
a result, hiding it has no effect and won't result in a call
to processResponse, where we got rid of the native dialog.
To fix this we explicitly release the native dialog when
encountering this corner case.
Add logic to QErrorMessage to test both native and non
native dialogs.
Pick-to: 6.5
Change-Id: I19ac3f463997aed1e66f646fdfcbb4d2459116d1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In case of QT_FEATURE_timezone=OFF test should not be built
Change-Id: If667b9edb1d670b9ed8a62f301a7e5e21e7d2b4c
Reviewed-by: Kimmo Ollila <kimmo.ollila@qt.io>
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
The multi-thread snippet in the documentation, when copied as is,
could actually crash because of the race condition between the main
thread and the thread that generate results for the promise.
This is fixed by explicitly calling QPromise::start().
Actually, the underlying snippet already has this call, it just was
not included in the documentation.
This patch modifies the documentation snippet to include calls to
both QPromise::start() and QPromise::finish().
Fixes: QTBUG-109230
Pick-to: 6.5 6.4 6.2
Change-Id: Ic25f31a6b3b16ba6bc06a0b199289c8c5d50bab6
Reviewed-by: Sona Kurazyan <kurazyan.sona@gmail.com>
Support serializing shaders with specific qsb version. The default
behavior remains the same, using the latest version.
Task-number: QTBUG-101062
Pick-to: 6.5
Change-Id: I090a88c1ccb3be4ac5eee1da4058afaa8bf3111c
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Instead of the more verbose currentDateTime(QTZ::UTC).
Pick-to: 6.5
Change-Id: Ie759f4270b12fca39c458bf85c8296f5342033db
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To support cancellation of continuations attached via the parent future,
we store a pointer to continuation future's data in parent. This
requires preserving the lifetime of continuation future's data while the
parent is still alive (see 24dedaeaa1).
This is achieved by capturing the promise in the continuation's lambda,
which is only cleaned up after the parent's data is destroyed. This is
already the case for continuations without context, but was overlooked
for continuations with context: they transfer the ownership of the
continuation promise to lambda passed to QMetaObject::invokeMethod(),
which destroys the lambda's context after it's run. As a result, the
continuation's promise (and data, if there are no other copies of it)
is also destroyed, leaving the parent pointing to deleted continuation
data.
To fix this, capture a copy of continuation future's ref-counted data in
the continuation's lambda. This will guarantee that the continuation
data remains alive until the parent is destroyed and the continuation
is cleaned up.
Fixes: QTBUG-108790
Pick-to: 6.5 6.4 6.2
Change-Id: Ief4b37f31e652988d13b03499505ac65c7889226
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Not all locales use ASCII hyphen-minus U+002D as minus sign. On macOS
using the nb_NO locale the U+2212 character is used instead when
displaying negative years. Verify that one of the two characters is
found.
Fixes: QTBUG-109853
Change-Id: I424539cc8d427ac199b4528e44bef98e45312d07
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As discussed in the latest CMake API Review, we are deprecating the
FILENAME_VARIABLE variable name everywhere, and replacing it with
OUTPUT_SCRIPT.
[ChangeLog][CMake] The FILENAME_VARIABLE option of
qt_generate_deploy_script and qt_generate_deploy_app_script is now
deprecated, use OUTPUT_SCRIPT option instead.
Change-Id: Ic8be33eefbc48540166ea0fcf1d1948b052d4b8a
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
These are time stamps, and they use toMsecsSinceEpoch(), no point
getting the time in Local time zone then converting it.
Change-Id: I2db2db5f9ebc062e65514a592fa7fa00cf1d179d
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is inherently faster than getting it in UTC from the underlying
native API stat call, then converting it to the Local Time Zone just to
compare them. The same goes for any use-case where you get a QDateTime
then the first thing you do is call t.to{Msec,Secs}SinceEpoch().
Change-Id: Ic13bcfd99b937c9f10f102ea7741832950a553c6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
If an item in a list view has a null icon, then the decorationSize gets
calculated as -1, -1. The style would then try to wrap the text to a
lineWidth of -1, ending up in an infinite loop in viewItemTextLayout.
To prevent that, don't set the HasDecoration flag of the style option
when the icon is null, and don't fall back ot the decorationSize unless
the flag is set.
Add a test for this particular item configuration. This also fixes the
widget baseline test with styles that don't provide all standard icons.
Pick-to: 6.5
Change-Id: I691db6abede9a9b2ad300f3ee7fbfdae5fb6097f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
Wayland omits optimizations tested in tst_QWidget::optimizedResizeMove()
and optimizedResize_topLevel() under certain circumstances, e.g. on
Ubuntu 22.04 / Gnome. This makes the test functions fail.
This patch skips the test functions on wayland platforms, if an
omission is detected.
This amends 2ec7a6322f.
Fixes: QTBUG-109746
Pick-to: 6.5 6.4
Change-Id: If0df6b1cf451a7f0dccfc1bb7411e895d7ae29a3
Reviewed-by: Liang Qi <liang.qi@qt.io>
QWindow::requestActivate() is not supported.
This amends c95de359b4.
Task-number: QTBUG-107153
Pick-to: 6.5 6.4
Change-Id: I45f53b5e9de85049ca41cc139a78a82450f53bed
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test function used to flake on Linux occasionally.
8e6ede7cd1 provided a fix. While it
seemed to work, further analysis has shown that the root cause is
event sequence in case of multiple paint events.
This patch re-engineers the test function:
1. Allocate test widget on the stack instead of the heap.
2. Send layout requests posted by QHBoxLayout constructor and
QLayout::addWidget() before showing the widget.
3. Remove calls to QCoreApplication::processEvents().
They are unnessecary, because
- the size hint request counter is supposed to increase (by any number)
- QTRY_VERIFY processes events anyway until the counter increases or it
times out.
Pick-to: 6.5 6.4 6.2
Change-Id: I54998483725cbdd4899ba6f5469d7dae0980ab1d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The test shows an application modal QMessageBox, but assumes that doing
so will be non-blocking, which for macOS is not the case (yet). Instead
of making the dialog window-modal, which would potentially affect the
logic of the test, we disable native dialogs. This should be fine, as
the purpose of the test is to test the is_closing logic of
closeAllWindows, which lives on a layer above the native dialogs.
Pick-to: 6.5
Change-Id: I6d627984a6ca452b876f34404b669fce41a00851
Reviewed-by: Doris Verria <doris.verria@qt.io>
With the methods that use helpers from qstring.cpp defined in the
latter.
Change-Id: I11d6b0bfb95efe34e56d33d2ecbfe8f4423a9e6c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Makes the pre-existing QFutureInterface functionality available via
the public QPromise API.
[ChangeLog][QtCore][QPromise] Added addResults() to report multiple
results at once.
Change-Id: I18e6ef2781df422020b9022d78d6c45107b01668
Reviewed-by: Sona Kurazyan <kurazyan.sona@gmail.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
In preparation to their deprecation / removal.
Change-Id: Ia073a9f7caabbc06063a1e416b23cdb12788b283
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If a type is trivially default constructible, QMetaType (and QVariant)
think that it can be built and value-initialized by zero-filling a
region of storage and then "blessing" that storage as an actual instance
of the type to build. This is done as an optimization.
This doesn't work for all trivially constructible types. For instance,
on the Itanium C++ ABI, pointers to data members are actually
value-initialized (= zero-initialized, = initialized to null) with the
value -1:
https://itanium-cxx-abi.github.io/cxx-abi/abi.html#data-member-pointers
This means that a type like
struct A { int A::*ptr; };
is trivially constructible, but its value initialization is not
equivalent to zero-filling its storage.
Since C++ does not offer a type trait we can use for the detection that
we want to do here, and since we have also decided that Q_PRIMITIVE_TYPE
isn't that trait (it just means trivially copyable / destructible), I'm
rolling out a custom type trait for the purpose.
This type trait is private for the moment being (there's no
Q_DECLARE_TYPEINFO for it), and limited to the subset of scalar types
that we know can be value-initialized by memset(0) into their storage
(basically, all of them, except for pointers to data members).
The fix tries to keep the pre-existing semantics of
`QMetaType::NeedsConstruction`. Before, the flag was set for types which
were not trivially default constructible. That included types that
aren't default constructible, or types that cannot do so trivially.
I've left that meaning unchanged, and simply amended the "trivial" part
with the custom trait. A fix there (to clarify the semantics) can be
done as a separate change.
Change-Id: Id8da6acb913df83fc87e5d37e2349a4628e72e91
Pick-to: 6.5
Fixes: QTBUG-109594
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QDockWidget::createTestWidgets did not set a minimum size for
test widgets. Upon unplugging, that can lead to a size correction in
connection with 8687c3f938cac56c4a2518576a5c9fac150d8de1, if the widget
gets too narrow to correctly display window handles. Test functions
checking the size after unplugging can fail in that case.
This patch sets a minimum size to each test widget created. The minimum
size corresponds to QStyle::PM_TitleBarHeight.
Task-number: QTBUG-106531
Pick-to: 6.5 6.4 6.2
Change-Id: I3e552b37416d57d8ed30e0b9de4eec55f07ea158
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Turns out we don't support QStringView/QUtf8StringView comparison, and
the only reason the corresponding test succeeded was because it
contained a typo (QStringView instead of QUtf8StringView).
Fix the typo and disable the now-failing test.
Pick-to: 6.5 6.4 6.2
Change-Id: I2210a247aac66743851e53578172a563ee1e96f7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test function places a QSpinBox in a QHBoxLayout, which has a
QWidget parent. The spin box is expected to be shown with the widget.
While the widget is the layout's parent, the layout is not explicitly
set. That makes the test function flaky in some cases.
This patch adds QWidget::setLayout() to explicitly set the layout on
the widget.
Pick-to: 6.5 6.4 6.2
Change-Id: I3a1cc77c302c5ba96d3628d035139f9718dda9e5
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The existing symLinkTarget() always resolves the symlink target to an
absolute path; readSymLink() provides access to the relative path when
that is how the symlink references its target.
[ChangeLog][QtCore][QFileInfo] Added readSymLink() to read the symlink's
raw target, without resolving to an absolute path.
Fixes: QTBUG-96761
Change-Id: I360e55f1a3bdb00e2966229ea8de78cf29a29417
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
testWhiteSpaceNames() returns true for all current database drivers so
it's useless and can be removed. safeDropView() and getPSQLVersion()
is not called anywhere, getMySqlVersion() is only used for a check for a
MySql version we no longer support.
Change-Id: I8d02f17f475821e81d309ee96897e772cdfb895d
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The qt_findAtNxFile helper in qicon.cpp expects a local file name that
can be probed with QFile::exists. If the src attribute of an <img>
element specifies the location of the image as a file:/ or qrc:/ url
rather than as a local file name, then we need to strip the scheme
off the file path, and in the case of a qrc URL leave the :/ prefix
before calling the qt_findAtNxFile helper.
Amends, and partially reverts, 760df72565.
We can't avoid testing whether the source in the HTML is provided as a
URL before interpreting it as a file name.
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-109212
Change-Id: I7ea7a5bfde79bab90a8025c42e754129813dd0fc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QtBase didn't contain any checks for QT_RESTRICTED_CAST_FROM_ASCII, so
a recent addition to the QString::append/insert/prepend overload set
made calls with C string literal arguments ambiguous without the CI
noticing. We had a similar problem with QString::multiArg.
To increase test coverage, we now run tst_qstring two times:
- without any define
- with QT_RESTRICTED_CAST_FROM_ASCII (lots of changes necessary)
Most removals are expected, because they disable tests that check the
implicit conversions from QByteArray and const char*, but the
relational operators with QLatin1String objects might warrant fixing.
In some places, when the conversion wasn't the functionality under
test, replaced C string literals or QByteArrays with QLatin1String.
We should also test with QT_NO_CAST_FROM_ASCII, but that's even larger
surgery.
QString doesn't have a ctor from std::nullptr_t, so QString s =
nullptr; doesn't compile in C++17 mode, but does in C++20 mode, due to
the const char8_t* ctor.
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: I0c5a31719a4b8dd585dd748e0ca0d99964866064
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
ASan inserts a lot of function calls in between our calls, so they end
up in the backtrace and cause unexpected results.
Similar to c672f148db.
Fixes: QTBUG-109559
Pick-to: 6.4 6.5
Change-Id: I69ecc04064514f939896fffd1732dd2bc0317ae4
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We only need to skip the backtrace ones, because there's no library
called "Qt6Core".
Pick-to: 6.4 6.5
Change-Id: I69ecc04064514f939896fffd1732dd680058ba6e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reorganize them and fix the comment.
Pick-to: 6.4 6.5
Change-Id: I69ecc04064514f939896fffd1732dd57203cb21f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If an image source in HTML is specified via local file name or resource
path (i.e. without qrc prefix), then the correct image is loaded.
With file:/ or qrc:/ schema however, the image is either not loaded at
all, or the 2x image is not loaded. The qt_findAtNxFile helper in
qicon.cpp gets a URL path, but expects a file path (that can be tested
with QFile::exists).
Task-number: QTBUG-109212
Pick-to: 6.5 6.4 6.2
Change-Id: Ibcf687c69b3e53a10f21d718d28c8177a02d6be6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Amends 52ce0c177e, which added the test
without adding it to the parent directory.
Refactor the test code to be data driven, add the image files as
external test data files, and adjust the test code to find the files.
Use the QTextImageFormat from the document rather than a manually
crafted one, as otherwise we don't test a real usecase.
This also makes the test more flexible for adding qrc, resources, and
file URLs.
Task-number: QTBUG-109212
Pick-to: 6.5 6.4 6.2
Change-Id: Id0771037b961d95ec3cadd0cd6467d2448f22884
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
Behavior of EnterKey for virtual keyboard need to be changed for
QLineEdit. Before this commit, ImeOption was set to IME_ACTION_DONE.
Because of that, setting any text in QLineEdit automatically accept
QDialogs. That was annoying, when more than one QLineEdit need to be
set.
[ChangeLog][Widgets][Android] EnterKey type is now changed from
EnterKeyDefault to EnterKeyNext for virtual keyboard in QLineEdit. It is
done only if the focus can be moved to widget below.
Fixes: QTBUG-61652
Change-Id: I98a7686f9f675fccf0112b8d27d48ad8fd7a887f
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
... in lieu of <cctype>'s toupper(), which is locale-dependent, and
out-of-line.
The code doesn't run into the toupper(i) issue in the Türkiye locale,
because we don't run tests in that locale and because 'i' is not a
valid format specifier, but don't let the next reader of the code
guess when the use of toAsciiUpper() provides unambiguous guidance.
Task-number: QTBUG-109235
Pick-to: 6.5
Change-Id: I8988f5190441e1ae5cb57370952cda70ca6bb658
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This makes it possible to process QML files using qmlcachegen, and
retain the file nodes in the resource file system, but remove their
actual content from the binary. To do so, you need to mark your files
with the QT_DISCARD_FILE_CONTENTS source file property.
Fixes: QTBUG-87676
Fixes: QTBUG-103481
Fixes: QTBUG-102024
Fixes: QTBUG-102785
Change-Id: I93d5a2bfca1739ff1e0f74c8082eb8aa451b9815
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: hjk <hjk@qt.io>
If a widget's geometry is restored to a screen, which is smaller than
the one it was saved from,
- the widget could appear (partly) off screen
- the widget's title bar and resize handles could be inaccessible
This patch refactors and documents checkRestoredGeometry.
In a first step, the restored geometry's size is checked against
a given screen size. It is corrected if necessary.
In a second step, the restored geometry is moved inside the screen,
if necessary.
It makes the function a static member of QWidgetPrivate in order to
expose it for auto testing and adds a respective test function to
tst_QWidget.
Fixes: QTBUG-77385
Fixes: QTBUG-4397
Task-number: QTBUG-69104
Pick-to: 6.5 6.4
Change-Id: I7172e27bfef86d82cd51de70b40de42e8895bae6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Check for state.remainingChars to signal an encoding error only after
the last chunk has been processed. Splitting surrogates at chunk
boundaries is normal operation, not an error. Only if this happens at
the end of the whole input should we raise an error.
Amends fa2153bd10.
Pick-to: 6.5
Change-Id: Id92e37becaed25bbc11e0c22dedc4d41fb23f92a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
... not just those in the BMP.
The use of char32_t makes the isValid helper function easier to
read. Its passing to write() is enabled by the recent port to
QAnyStringView, which has a char32_t ctor.
Split into per-plane executions of the test function to avoid
running into timeouts on asan builds down the road.
As a drive-by, replace use of QPair with a proper struct, and
make the intervals symmetrically inclusive the bounds.
Pick-to: 6.5
Change-Id: I2c6858d7e6a88f448eac1b1e124d7d7b82828d4c
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Some more modern protocols like Bluetooth LE transmit data in little
endian. QtBluetooth will benefit from this.
Change-Id: Id8e48e8f498c4a029619fffd1728c94ddd444537
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This is inspired by QBluetoothUuid's quint128, but with a better
name. It also matches systemd's sd_id128.
Change-Id: Id8e48e8f498c4a029619fffd172893dc1545adda
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Relevant mainly if we want to consistently expose these as the
theoretically correct uint32_t/quint32 from Qt Quick's
QSGRendererInterface. (not that int is not sufficient for
indexing the typical 3-4 families and 2-16 queues per family)
Some checks are not actually needed since the family index
must always be valid after create().
Pick-to: 6.5
Task-number: QTBUG-108895
Change-Id: I474ccea51a81e7a096281604ff79b7db4cdd2484
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
qdbusxml2cpp takes a filename to use for generated output. It may be in
the form 'name.cpp' or just 'name'.
For the moc file we need to convert this from a path to a name of a file
in the same relative folder. It's not uncommon for this name to contain
dots as sometimes a dbus interface name is used directly. For the cases
where a suffix is not provided the whole name should be used.
Pick-to: 6.5
Change-Id: I3bf4ae8b2b9121184c2786009e8b5abcc5e3e410
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
WHEN writing an invalid character, THEN we expect the writer to report
an error.
The old code had it the wrong way around. It checked that WHEN the
writer reports an error, THEN the character was invalid.
The formulations are equivalent, but the latter is mixing up cause and
effect, making it less clear what's being checked (QXmlStreamWriter,
not isValidSingleTextChar()), so swap.
Pick-to: 6.5 6.4 6.2
Change-Id: I703de9ddde98d9913977a913f671472930735900
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Mate Barany <mate.barany@qt.io>
This improves the runtime of this particular test function by
almost 17% on my machine.
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: Icd77cdda92374b92121988c99e56787d405fa2d9
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
These tests exhibit weird crashes when run under ASan, but sometimes
they fail sometimes they don't. Pending more insight, just skip this
test under that configuration.
Fixes: QTBUG-109329
Change-Id: I49d940de419f7166aab0da0b8c2b44297c4b6d74
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
in our tests.
They are not needed anymore since
d20f4ae706 got merged and the
QT_ANDROID_PACKAGE_SOURCE_DIR property is read at generation time
rather than configure time.
This means the
qt_internal_add_test ->
qt_internal_add_executable ->
_qt_internal_android_executable_finalizer ->
qt_android_generate_deployment_settings
calls take care of generation the right value for the property even
with CMake 3.16.
Remove the direct qt_android_generate_deployment_settings calls,
in preparation for their deprecation in public api.
Pick-to: 6.5
Task-number: QTBUG-88506
Task-number: QTBUG-88840
Task-number: QTBUG-108508
Change-Id: Ief1d0f9f620bd37beeedde26dedb66f728fa4a6f
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Fixes issues with readback of storage buffers modified on GPU for D3D
and Metal. Adds unit test for storage buffer readback.
D3D
* Fixes issue where QRhiBufferReadbackResult::completed callback could
be called twice on buffer readback completion.
Metal
* Fixes issue where buffer readback occurred prior to command buffer
being committed.
Change-Id: If55ac005f4438d66d2f65ea2e1ee0d5686c884ff
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The object replacement character (U+FFFC) is used to represent
inline objects such as images in rich-text. To enable this,
we have special handling of it in QTextEngine. For classes
where inline images are not supported, it will just be hidden
from the visual text, which is unexpected.
Instead of always special-casing it, we make this dependent
on whether the document layout has registered any object handlers.
If they have not, then there will be no visual representation of
the object, and it is better to show the glyph for it.
For anything based on QTextDocument, there will always be the
image handler, so U+FFFC will still have special handling there,
but for non-rich labels and plain text editors the glyph will
be shown instead.
Note that there was also a bug in QLineEdit, where the object
replacement character was always replaced by a space. This was
introduced in 2007, in a patch which replaced a !ch.isPrint()
with a check for "the most obvious non-printable characters"
to reduce the number of characters that were not shown. However,
U+FFFC is a printable character and would thus not have been
filtered by the !isPrint() condition, so I think this was a
mistake at the time. However, due to the special-casing of
the character in Qt, it would not have had any effect until
now.
This also changes the QTextLayout::cursorToXForInlineObject()
test to actually test proper inline objects, as this was
previously using a hack which depended on the inline object
code to be used even for plain QTextLayouts with no handlers
for these.
[ChangeLog][Text] The object replacement character (U+FFFC)
is now only filtered out in rich text controls, where they
represent inline objects. In other controls, its glyphs will
be shown as with other text.
Pick-to: 6.5
Fixes: QTBUG-101526
Change-Id: I7fcaf2b10918feb41589e1098016efbf79a0e62d
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
QBuffer::open() was only documented as \reimp, so its behavior
regarding WriteOnly was never actually described.
Add a test and document the outcome.
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: I75c49cd3f6a1961bcaece4a92a4e479bb3300d36
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
tests/auto/corelib/text/qbytearrayapisymmetry/tst_qbytearrayapisymmetry.cpp:1174:80:
warning: overflow in expression; result is -9223372036854775808 with
type 'long long' [-Winteger-overflow]
const qlonglong longMaxPlusOne =
static_cast<qlonglong>(Bounds::max()) + 1;
tests/auto/corelib/text/qbytearrayapisymmetry/tst_qbytearrayapisymmetry.cpp:1175:81:
warning: overflow in expression; result is 9223372036854775807 with type
'long long' [-Winteger-overflow]
const qlonglong longMinMinusOne =
static_cast<qlonglong>(Bounds::min()) - 1;
I usually build with GCC, but building with Clang for clazy-standalone,
so I saw these two warnings 500+ times, enough already. :)
Change-Id: Idd86af568ffe89ae49b2a3f9bbeedf312de5e631
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It looks like AAssetDir_getNextFileName is not enough.
Directories that contain only other directories (no files)
were not listed.
On the other hand, AAssetManager_openDir() will always return a
pointer to initialized object (even if the specified directory does not
exists), so we can't just leave only it here.
Using FolderIterator as a last resort. This approach should not be too
time consuming.
As part of this fix, add some unit tests to cover/ensure assets
listing/iterating works as expected.
Fixes: QTBUG-107627
Pick-to: 6.4 6.2 5.15
Change-Id: Id375fe8f99f4ca3f8cad4756f783ffafe5c074df
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Silence warnings such as:
variable 'sum_lookup_visual' set but not used [-Wunused-but-set-variable]
Change-Id: If38515d9753cf7b79a250985890a139e96e92329
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Cocoa's columnArray::count is an unsiged int, resulting in a compile
warning when QCOMPARE'ed with a signed integer literal.
Change-Id: I420a9e89bba5feeb9d8a040a06e6ba0e209c82f3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Variant-selectors are special unicode symbols which are used to
modify glyph selection for the preceding character. For instance,
a regular symbol could be turned into a color emoji using VS16,
the emoji variation selector. In order for this to work, however,
the font that handles the selector has to handle the full pair of
characters, so that it can apply the correct substitution rules.
One specific example of this was on macOS, where an airplane
symbol + VS16 would match the symbol to the default UI font but
the VS16 to the emoji font. Since there string provided for the
emoji font did not have any preceding character for VS16, we just
ignored it.
To improve on this, we now detect variation selectors that have
been matched to different font engines than the preceding
character. When such a case occurs, we check if the selector font
also supports the preceding character, and if it does, we keep
the pair together and use the same font for both.
[ChangeLog][QtGui][Text] Fix some cases where a variation-selector
character would be ignored in font selection and the correct
variant of a character would thus not be selected.
Task-number: QTBUG-108799
Change-Id: I9f427e0520e652ee2f24a4f7dc3c1957251e06bd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add storage buffer memory qualifier and run time array stride information
to QShaderDescription::StorageBlock.
Memory qualifiers allow more informed selection of RHI resource buffer
binding (bufferLoad / bufferStore / bufferLoadStore) function.
Run time array stride (for last block member unsized array) allows
packing of buffer data for transfer to / from GPU. Without this
information, applications must infer or guess which packing rules
(std430 / std140) are in use.
Change-Id: I676d7e848afefd40d01cdd463c569b07022b683e
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
In the process actually handle all time-spec cases in various places
that only handled UTC or LocalTime, or at least note that they don't
where that's not practical. Also tidy up header ordering and ensure
QDateTime's header is included wherever it's used, while adding the
include for QTimeZone where needed.
Task-number: QTBUG-108199
Change-Id: Ic1a5cdf0aaf737bf1396aa8ac58ce2004cef7e19
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
As foreshadowed when QDateTime adapted to route all QTimeSpec use
through QTimeZone, this commit deprecates the old API in favor of the
newly more capable QTimeZone-based API.
Fixes: QTBUG-108199
Change-Id: I9a3f9f94d4a5d8cc229db72b3e4731a9e318a076
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Input events that originate from actual device interaction should reflect the
device's state, and device and events need to be kept in sync so that event
sequences (such as multi-touch events, where we have begin/update/end cycles
spanning multiple events) are working correctly.
For that reason, the event point data in pointer events is explicitly shared,
and we only detach in exceptional situations. This saves us memory allocations,
and makes sure that the event point data carried by events, and the event point
data stored persistently in the device, are kept in sync.
Cloned pointer events do not originate from device interactions, and should
therefore not sync back to the device. E.g. accepting a clone should not modify
the original event data stored in the device. There are exceptions here as
well, e.g. when cloning an event in Qt in order to deliver a translated version
of it to a different scene. Different points might even get delivered to
different scenes or windows, or at least different items in the same scene. For
that reason, we explicitly detach, and then explicitly write back the relevant
states after the cloned event has been delivered.
But in general, we should assume that cloned events do not write back to the
device. Since QEventPoint is an explicitly shared data type that never detaches
itself, we have to explicitly detach it when making copies that should not be
shared.
The ideal implementation of this would be to do the detach in the copy
constructor of QPointerEvent, which is called when cloning. However, Qt itself
makes copies of QPointerEvent without using clone, e.g. when assembling lists
of touch events for the different subscenes or windows in
QGuiApplicationPrivate::processTouchEvent, where event objects are added to a
QVarLengthArray<QMutableTouchEvent>. This makes copies, and those copies must
not detach.
So we have to implement the special cloning behavior in each override of
QPointerEvent::clone(). For this, introduce a dedicated macro for the common
member functions. This macro must be used for QPointerEvent subclasses.
Fixes: QTBUG-107560
Change-Id: I4b56f9e71c7d067ba9054a2a631e8ba5bc7b1ab9
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
XML does not impose any semantics based on the order of the attributes;
they're an unordered set. Quoting [1]:
> Note that the order of attribute specifications in a start-tag or empty-element tag is not significant
and [2] 2.2.5:
> An unordered set of attribute information items
Still, using a QHash-based implementation to store attributes is
annoying, because one cannot serialize the document in a stable way.
The order of attributes is going to depend on the QString hash function
(which we can change at any time) and the QHash seed (which is random
and changes at every run). In other words, saving the same DOM will
yield non deterministic outputs. That's annoying for testing,
reproducible builds, and so on.
Switching to an _ordered_ associative container for storing attributes
won't, on its own, ensure any specific ordering. That's because:
* attributes are currently kept associated using their name as the key,
ignoring an eventual namespace prefix;
* there's some convoluted logic that sometimes emits attributes in the
xmlns namespace (to qualify a prefix).
Hence, just go for the straightforward implementation and sort the
attributes before streaming them. In the main loop I could have used a
range-based for loop over the associative container used for attributes;
since it's a Qt container, it would have yielded just the values in the
map, and we are not interested into the keys. However I'm preparing for
further changes down the road, so I'm opting for key/value iteration.
I'm deliberately not offering an opt-out because:
* I don't think this is so expensive to justify an opt-out;
* I'm going to remove QHash anyways in a follow up commit.
[1] https://www.w3.org/TR/xml11/#sec-starttags
[2] https://www.w3.org/TR/xml-infoset/#infoitem.element
Task-number: QTBUG-76800
Task-number: QTBUG-25071
Change-Id: I6282ae2ccbee9c0099f138de48b94bb7c40b3680
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In the process, centralize the creation of date-time values, where
doing so requires catching invalid results caused by spring-forward
gaps; this saves some repetition and extends the treatment to more
places that did need it. Also, de-inline two overrides of virtuals;
being inline does them no good.
Replace the Qt::TimeSpec member of QDTEPrivate with a QTimeZone so
that creation of values can be streamlined and to make it easier to
add support for (currently unsupported) OffsetFromUTC and TimeZone
timespecs in the public QDTE API.
This greatly simplifies a lot of the code, while preparing it for a
long-needed extension to its functionality.
Task-number: QTBUG-80417
Task-number: QTBUG-108199
Change-Id: I0ac2c78025013bf89899e3ef1a56e89392f67ce5
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This saves (mostly in corelib/time/) some complications that used to
arise from needing different code-paths for different time-specs.
Task-number: QTBUG-108199
Change-Id: I5dbd09859fce7599f1ba761f8a0bfc4633d0bef9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For now, just addDays() and the springForward() test, as proofs of
concept for future work to be more systematic.
Change-Id: Id2c4e9ad304d3aef6fdfb48ae6328df8c638c934
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Free most APIs using QTimeZone from feature timezone and route all
APIs taking a naked QTimeSpec via these, in preparation for their
eventual deprecation. Since qtimezone.h includes qdatetime.h (and MSVC
blocks our ability to remove the need for that), qdatetime.h's
declarations can't use a default value for QTimeZone parameters; so
add overloads taking no zone (or spec) to handle that.
[ChangeLog][QtCore][QDateTime] All QDateTime APIs involving a
Qt::TimeSpec can now be routed via QTimeZone's lightweight time
description support, saving the need to have different code paths for
different time specs. In the process, QDateTime gains a
timeRepresentation() method to return a QTimeZone reporting the
(possibly lightweight) time description it uses. (The older timeZone()
method always returns a non-lightweight QTimeZone, whose timeSpec() is
Qt::TimeZone.)
Task-number: QTBUG-108199
Change-Id: I23e43401eb2dbe9b7b534ca6401389920dd96b3c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QTimeZone] QTimeZone is now always defined;
feature timezone now controls most of its prior API and some new API
is added, most of it always present, to enable QTimeZone to package a
Qt::TimeSpec and, for Qt::OffsetFromUTC, its offset. Prior to this
change, APIs using Qt::TimeSpec had to provide a separate function
taking a QTimeZone alongside a function taking a Qt::TimeSpec and
optional offset; it will now be possible to unify these into a single
function taking a QTimeZone. Adaptation of other Qt classes to do so
shall follow.
Task-number: QTBUG-108199
Change-Id: If5ec3cc63920af882ebb333bf69cde266b1f6ad7
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
... where 50b05e3e2a originally added
them.
While qtversion.h is included in qglobal.h, using qtversion.h directly
is a tiny step towards removing qglobal.h includes from our code-base,
so don't let this opportunity go to waste.
Change-Id: I28eaca1f4e250fc9e12e2ce6a6f94670a1d08dbe
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This test makes use of a GCC extension-slash-defect in matching of
template template parameters. Either Clang has recently changed its
behavior not to accept them any more, or we've never compiled this test
with Clang.
Tested with Clang 15.0.6.
Pick-to: 6.4
Change-Id: I69ecc04064514f939896fffd172e98d826989ca3
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The 'QT_ANDROID_MULTI_ABI_FORWARD_VARS' variable allows to forward
variable values to ABI-specific external projects. The variable accepts
names of variables that needs to be forwarded.
Pick-to: 6.4
Task-number: QTBUG-107893
Change-Id: Iaa4fa7e98ad0df956d90f91e157edb561183c795
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add the full set of substringing operations:
- mid/left/right (old-style)
- sliced/first/last (new style)
- chop/chopped/truncate
The implementation is copied from QUtf8StringView, adjusted to use
sliced() instead of the (ptr, n) ctor, so we need to deal with the tag
twiddling only once, in sliced().
The documentation is also copied from QUtf8StringView.
[ChangeLog][QtCore][QAnyStringView] Added substring functions
sliced(), first(), last(), chop()/chopped(), truncate().
Change-Id: Ief454e9694519e97d9146fa84bc05dda1dded046
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test message sent to the dbus might never see a reply, e.g. in case
of a misconfigured dbus. Instead of waiting for a reply and stopping the
static top-level build, timeout after the CI had enough time to receive
the dbus message (5 seconds).
Change-Id: Ic6d60e7d1ddb2d864dc4a78d4edbd0ef7b6604c2
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Amends a874087504, which tested whether
d->container is nullptr to decide whether to hide the popup, and then
dereferences d->container later without checking again. This raised a
correct static analyzer warning.
Simplify that logic. hidePopup() does nothing if there is no visible
container, and we don't want to accept() the cancel key if there isn't.
So the closeOnCancel logic isn't actually needed, we only need to accept
the ShortcutOverride to make sure that QComboBox sees the Cancel key
even if there is a shortcut registered, and then we can handle and
accept the cancel key to call hidePopup() only if the popup is visible.
Add test to verify that this interaction works as expected.
Pick-to: 6.4
Task-number: QTBUG-108908
Change-Id: I60d92b068f0f5139d629cf4a58e225512170df77
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In the process, split some long lines. The test relies on omitting the
hour (so as to get the default, 0) from both the format string and the
string parsed, so as to test that the parser correctly handles the
corner case where the zone skips the first hour of the day. This was
not entirely obvious when reading the row data, so make it explicit in
a comment.
Change-Id: I919b292b78bd399a8749806a0e913d43f5b414e1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mate Barany <mate.barany@qt.io>
Test a few more cases are correctly handled.
Change-Id: I7f286ba93f59bf0168cac789cd30590f40e98cee
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The spec deseralized isn't a Qt::TimeSpec; handle it correctly instead
of taking for granted that QDateTimePrivate::Spec's values happen to
match.
Change-Id: I67f3c960f3a3b90cdad3c1eca673f7ec8fd10b82
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Mostly pedagogic checks in operator_insert_extract(), but also
sanity-checking, to confirm spec conversions produce results equal to
what each came from.
In daylightTransitions(), verify the spring forward goes from standard
time to daylight-saving time.
Change-Id: Ieb9c603ee2eadecea055da4e8889528161f4d999
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QCOMPARE(a, b) in place of QVERIFY(a == b), similar with
QCOMPARE_LT() and QCOMPARE_LE(); and use a scope-guard to emit a
message on failure instead of incurring the cost of building a string
for the message, even when the passing test doesn't need it.
Change-Id: I3884bc40e89a4b1ba881968b99faab27d4b1abc9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Principally to get Qt::LocalTime mentions out of the way ahead of the
QTimeZone work on Qt::TimeSpec, but also mop up trailing 0 parameters
to QTime for seconds and milliseconds.
Change-Id: I51041582faae100894a567c9e5ae96a60a3b2d8c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Mate Barany <mate.barany@qt.io>
Left over from long ago, making confused use of Qt::hex.
Change-Id: I7f411e4888ee1a637d2212fd6976dd003f8da9ce
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Several were overlong (or soon to get so by being made longer); others
were inconsistent with neighbors; one was inconsistent with itself.
Change-Id: I272680499605a757e4827d27021bf234a91cf77a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As a result, also make sure the test will fail if output to debug
stream doesn't produce the expected result.
Change-Id: I9914c9c41c8d8b79f32dfb8e0c735f12e2d59f5e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Put core includes all in a common form, sort alphabetically.
Remove a stray blank line.
Change-Id: I211c6b407f5e49d907cb065521883567f1dd30f4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Comparing to true and false doesn't enrich the output.
Change-Id: Ie26a3f3d584f88310b8d4a31cad07be8dc8cb646
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Same fix as in tst_qbytearray's QCOMPARE() in
cb9715557c.
Pick-to: 6.4 6.2
Change-Id: I2222d9015ae7121a2fbcf5b936b27de20e873064
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
After this change, private CMake scripts are mostly live in
`libexec/`, except the `qt-cmake` which will stay in `bin/`.
This doesn't affect the Windows configuration.
- `qt-cmake` stays in `bin/`
- `qt-configure-module` moves into `libexec/`
- `qt-cmake-private` moves into `libexec/`
- `qt-cmake-private-install.cmake` moves into `libexec/`
- `qt-cmake-standalone-test` moves into `libexec/`
- `qt-internal-configure-test` moves into `libexec/`
In cases where `QT_GENERATE_WRAPPER_SCRIPTS_FOR_ALL_HOSTS` is set to
ON, e.g., ANDROID, WASM, both Batch and Bash files will be generated
and placed in `bin/` and `libexec/` accordingly; in both cases,
qt-cmake and qt-cmake.bat will be in `bin/` anyway.
[ChangeLog][CMake] The private Qt CMake scripts, i.e.,
qt-configure-module, qt-cmake-private, qt-cmake-private-install.cmake,
qt-cmake-standalone-test and qt-internal-configure-test were moved
into $prefix/libexec on Unix platforms.
Fixes: QTBUG-107621
Change-Id: Ic4f4ec85f64d2ede0e208bca928959e30be906a6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This amends fccd419dd6.
If Harfbuzz failed on one of the items in a string and returned
zero glyphs, then we would exit the shaping loop. The mentioned
change fixed a crash related to this when the ignored character
was the only character in the string, but it occurred in a
subitem of a longer string, then we would return and fail to
lay out the rest of the string.
This popped up recently because an update to Harfbuzz has caused
it to return zero glyphs when applying the Apple emoji font to
an isolated variant character (see bug report). When we matched
the symbol to the main font and only the variant character to
the emoji font, we would get in this situation, and end up
exiting the shaping early.
[ChangeLog][QtGui][Text] Fixed a regression which would
sometimes cause text to disappear if the string contained
an unmatched variation selector character.
Pick-to: 6.4
Fixes: QTBUG-108799
Change-Id: I616ab1b2d33c2df731419c5ce06fbc578a625a32
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When Harfbuzz returns zero glyphs, this will typically be because
the character is ignored. We currently have no way to differentiate
this from actual error cases, so to avoid return the error glyph
for cases which are not really errors, we set the dontPrint flag
for this.
When we add a way to differentiate between error cases and non-error
cases later, we should revert this for the actual errors.
Pick-to: 6.4
Task-number: QTBUG-108799
Change-Id: I2a910d951b71c705fb4dd761fcfe3a942b3afa7c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
There is no technical reason why qFatal shouldn't support categorized
logging, nor have a streaming version.
There is perhaps an API issue, that is, a streaming syntax may encourage
users to do "too much":
qFatal() << gatherLogs() << saveDatabase() << ...;
and that sounds like a bad idea in case the application is in an
unrecoverable state that requires immedate terminatation (indeed,
through qFatal). I'd err on the side of providing the extra convenience.
This commits adds overloads of QMessageLogger::fatal to support
categorized logging (note that fatal messages cannot be disabled),
the relative qCFatal macro, as well as overloads for streaming.
[ChangeLog][QtCore][QMessageLogger] QMessageLogger::fatal now supports
categorized logging, for instance using the qCFatal(category) macro.
Moreover, qFatal() and qCFatal() now support streaming of values
to be printed in the fatal message.
Change-Id: Ia57f25f5c85fca97e5fcf27eaa760dbde09cba0e
Fixes: QTBUG-8298
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For both the [4, 7] and [8,15] length cases, we can perform the same
technique: perform two overlapped loads, zero-extend, then perform two
overlapped stores. The 8-character case could be done in a single
load/store pair, but is not worth the extra conditionals. And it should
have the exact same performance numbers whether we use non-overlapping
4-character operations or completely-overlapping 8-character ones (I
*think* the full overlap is actually better).
The 4-character operation is new in this commit. That reduces the
non-vectorized, unrolled to at most 3 characters.
Change-Id: Ib42b3adc93bf4d43bd55fffd16c257ada774236a
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Add handling for MYSQL_TYPE_JSON by treating it the same as
MYSQL_TYPE_BLOB (which is used by current MariaDB Server for a json
column)
Pick-to: 5.15 6.2 6.4
Fixes: QTBUG-101680
Change-Id: I4d4b0cdad73cd12e0db4df4021fddbd6a649c8ed
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QWidgetWindow dispatched only tablet presses to the toplevel widget if
no child was found at the position; other events, such as hover events,
were discarded. The tabletTracking test case even documented that
shortcoming in a comment.
Fix that by falling back to the toplevel widget for any event. As
before, only press events initialize the tablet grabbing target widget.
Remove the now unneeded parent widget from the test case, and move the
test class into the only test function that uses it.
Amends ea615b421b and
8fd6cef372.
Pick-to: 6.4
Fixes: QTBUG-108747
Change-Id: I79050f1e063931e439945f64b50712dcc1ecb18c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
For QSet, the key_type is const, so can't test assiging to it.
Pick-to: 6.4
Change-Id: I9d363ef3fe52646b937d6a422227b19c48fdaf1f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Because they are too convenient to leave out.
Change-Id: I844cfb794ce0f575c2c65075d9051b0b878a434f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make sure that touching any file that is part of a qrc resource
actually rebuilds the resource and the target that depends on the
resource.
Pick-to: 6.4
Task-number: QTBUG-107687
Task-number: QTBUG-108113
Change-Id: I1153dc13fee44ffe59d2685a8cb33303538b026c
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Overloading insert is a bit tricky since the size might change after
the conversion so either the tail has to be moved twice or a temporary
buffer is needed. For now, add an ineffective but simple overload as in
the case of the const char *s overload, and do the performance
optimization in a follow-up task (QTBUG-108546).
[ChangeLog][QtCore][QString] Added insert(QUtf8StringView) overload.
Task-number: QTBUG-103302
Change-Id: If01c216ff626da29abb43eb68d4de82824f3bfba
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The += operator is already overloaded to handle QStringView and
QLatin1String - add the missing QUtf8StringView overload.
[ChangeLog][QtCore][QString] Added operator+=(QUtf8StringView)
overload.
Task-number: QTBUG-103302
Change-Id: Iec6940bad7866310c826a130b98accebc3c82aa8
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Add the missing overload, among other things it is needed to
implement QTBUG-103302.
[ChangeLog][QtCore][QString] Added append(QUtf8StringView)
overload.
Task-number: QTBUG-103302
Change-Id: I576f73c1919e3a1f1a315d0f82c708e835686eb1
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
For the case of static builds. Also, remove somewhat funny comment
from the shared tlshelpers.h file.
Fixes: QTBUG-105046
Pick-to: 6.4 6.2
Change-Id: I2fd677a11b64df89c0ad0237e1014f5e80144c24
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test functions tst_QWidget::optimizedResizeMove and
tst_QWidget::optimizedResize_topLevel use a custom widget to record
paint events in a boolean.
Using QTRY_* or qWait() to wait for the boolean to become true stops
event processing upon consumption of the first paint event.
In case of multiple paint events, the next paint event will be recorded
in the next check and may lead to a wrong result.
This leads to flakiness on platforms generating multiple paint events,
openSuSE Leap 15.4 / XCB being one of them.
This patch replaces the boolean with a counter. It adds a
waitForPaintEvents method to the custom class, which processes events,
until the counter stops increasing. It returns true when paint events
have been recorded and false otherwise. It resets the counter after
each call.
It also removes the QSKIP on wayland, as the failure results from the
same reason.
Fixes: QTBUG-109093
Pick-to: 6.4
Change-Id: I59ee8bb4efeaf5417d5749d21e384bee89301ae0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Also add optimizations for more string comparisons and add tests and
benchmarks.
[ChangeLog][QtCore][QString] Added utf-8 case-insensitive comparisons
Fixes: QTBUG-100235
Change-Id: I7c0809c6d80c00e9a5d0e8ac3ebb045cf7004a30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
During the implementation of QString::append(QUtf8StringView) it has
become apparent that the testing is insufficient as it did not warn
about an extra growth. The following tests have been added that append:
- y-umlaut and greek letter small theta (2 UTF-8 code units => 1 UTF-16)
- devanagri letter ssa (3 UTF-8 code units => 1 UTF-16)
- chakma digit zero (4 UTF-8 code units => 2 UTF-16 code units)
- some combinations of the above
Pick-to: 6.4 6.2
Task-number: QTBUG-103302
Change-Id: I981213c296bafc81663b08c0f1f339bbd8a96485
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
During the implementation of QString::append(QUtf8StringView) it has
become apparent that the testing is insufficient as it did not warn
about an extra growth. The following tests have been added that append:
- y-umlaut and greek letter small theta (2 UTF-8 code units => 1 UTF-16)
- devanagri letter ssa (3 UTF-8 code units => 1 UTF-16)
- chakma digit zero (4 UTF-8 code units => 2 UTF-16 code units)
- some combinations of the above
Pick-to: 6.4 6.2
Task-number: QTBUG-103302
Change-Id: I3d81cf10b7eb74433ce5bea9b92ce6bce1230dcd
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
During the implementation of QString::append(QUtf8StringView) it has
become apparent that the testing is insufficient as it did not warn
about an extra growth. The following tests have been added that append:
- y-umlaut and greek letter small theta (2 UTF-8 code units => 1 UTF-16)
- devanagri letter ssa (3 UTF-8 code units => 1 UTF-16)
- chakma digit zero (4 UTF-8 code units => 2 UTF-16 code units)
- some combinations of the above
Note that this also affects operator_pluseq_data, which is basically
a wrapper around append_data.
Pick-to: 6.4 6.2
Task-number: QTBUG-103302
Change-Id: I09ed950e3f0e71ae9ae85a455f42e130887f1109
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Implements an adaptor from the notification signal of a Q_PROPERTY to
QBindable. The Q_PROPERTY does not need to be BINDABLE, but can still
be bound or used in a binding.
[ChangeLog][Core][Q_PROPERTY] Q_PROPERTYs without BINDABLE can be wrapped in QBindable to make them usable in bindings
Change-Id: Id0ca5444b93a371ba8720a38f3607925d393d98a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The test function tst_QComboBox::setPalette() tests if the QComboBox
correctly inherits its palette to its QLineEdit child, by directly
comparing both palettes after a palette change on the QComboBox.
If the application palette for both widget types contains brushes which
are either pixmap based or the resolve mask prevents them from being
copied, the direct palette comparison between parent and child fails,
despite of a correct propagation.
This patch sets a simple gray application palette for QComboBox and
QLineEdit at the beginning of the test. The QSKIP for macOS is
removed, because using simple palettes solves both issues.
Change-Id: I61d509745377306d6f8331dfc1ac189fc58cdedb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It started being recorded as flakey after making macOS 13 a significant
config in the CI, but it's unclear why the test was not failing during
the nightly testing leading up to that.
http://testresults.qt.io/grafana/goto/-AzSwMKVz
It has also been blacklisted on macOS many times in the past.
Change-Id: I7be5fefb3669e9643a98d2ac82059bf0576c6d5c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This test causes instability in the CI, but so far nobody could
reproduce it outside of that specific CI environment. Skip it for now,
and investigate the root cause later.
Pick-to: 6.2 6.4
Task-number: QTBUG-106906
Change-Id: Idbbc560236ac475fcb4fdd5980397393f7a95474
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When a widget's palette has different brushes in Active / Inactive
color groups, or it is pixmap based, multiple paint events are
triggered. This leads to unpredictable, double entries in
QWidgetRepaintManager::dirtyWidgetList().
This patch overrides event() of all test widgets and ignores
activation / deactivation events in order to make the entries of
QWidgetRepaintManager::dirtyWidgetList() predictable.
Pick-to: 6.4
Change-Id: I164d7ab4148551590ac3c50fcc3b9f98c5ac0535
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QXcbBackingStore::toImage() returns a QImage that differs from what
is displayed on the screen: After multiple moves of children within
their parent widget, the last move is not always properly reflected
on openSuSE 15.4.
This patch blacklists the test functions fastMove, moveAccross and
moveInOutOverlapped on openSuSE Leap.
Task-number: QTBUG-109036
Pick-to: 6.4
Change-Id: Ideb505570df090b25d30762492d9c60beb6641ff
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
They are already slow without ASAN, and risk running into timeouts with
ASAN enabled.
Change-Id: I427b990066d8ffa838ea90a318176fbcba400852
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Both QStringView and QAnyStringView implicitly convert from any
container with a fitting value_type, and working std::data, std::size,
std::begin and std::end.
Add these missing operations (and complementary ones) to XmlStringRef,
so it implicitly converts to QStringView and QAnyStringView, too.
Add a check to that effect and remove the now-superfluous operator
QStringView().
Task-number: QTBUG-103302
Change-Id: I89d586cf64447a82022e06d546d7ee8339fc6dc7
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Avoid using perl in CMake scripts. Remove the syncqt.pl specific
code.
Task-number: QTBUG-87480
Change-Id: I7fcd5cc83d173ec463c275b5b50b84f25044a118
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
I've reserved the IDs for int128, uint128, bfloat16, and float128,
because the mask in qvariant.cpp's qIsNumericType() requires primitives
to be less than 64 to operate properly.
Added a QMetaType/QDataStream test to confirm it is indeed built-in.
Change-Id: I3d74c753055744deb8acfffd17247f7f57bada02
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The C++ equivalent is std::float16_t, defined in P1467[1], and is coming
with GCC 13 both in native mode (for x86, using AVX512FP16) and in
emulated mode. The C and C++ types will be the same type (<stdfloat>
simply typedefs).
qfloat16 will need to remain a wrapper with an integer member to keep
ABI with previous Qt versions. Because it is a trivially-copyable small
type, it gets currently passed in registers; the presence of the integer
member means it gets passed in general-purpose registers, while a single
_Float16 member would be passed in a floating-point register. See:
https://gcc.godbolt.org/z/8fEendjff
[1] https://wg21.link/p1467
Change-Id: I8a5b6425b64a4e319b94fffd161be56397cb48e6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
