The new test:
- checks the properties of stateful Q<Typed>Permissions work
- ensures that piping a Q<Typed>Permission through QPermission
maintains state
- also ensures that assignment of a Q<Typed>Permission to a
QPermission works (via QPermission(Type) + move ctor)
Pick-to: 6.5
Change-Id: I340e49b1ecc665702ccab26d9050ca158b0e7885
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test body has been inside an #if 0 for long, remove the test
altogether. The part that loads libthai does not check anyhing
meaningful.
Task-number: QTBUG-109954
Change-Id: I8ce006a14e4cf926b668e958d4b2343f965a5fb6
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
It had various QVERIFY()s of != and >= checks: convert these to
QCOMPARE_NE() and QCOMPARE_GE() checks.
Change-Id: Ida6f7dca726187f7837da0d805549d9c582f946a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ivan Komissarov <ABBAPOH@gmail.com>
When rows are hidden (implicitly or explicitly), then their layout data
does not get fully updated. If rows get hidden after the layout data has
been calculated once, then we must make sure that their indices are
reset. Otherwise we might access array indices that are out of bounds
when the layout data structure gets resized to fit only visible rows.
For good measure, skip entirely over hidden rows when accessing the
layout data when arranging the widget.
Fixes: QTBUG-109237
Pick-to: 6.5 6.4
Change-Id: I4d6943b6a110edb61f60ce78d31f0fc64b5cc03d
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
QDateTimeEdit has such reset functions for the minimum/maximum
range properties, this makes QCalendarWidget consistent with the
simpler editors.
Fixes: QTBUG-62448
Change-Id: Iabb89f599e4996f00488a885a5b8a009471838b3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
For most territories, if we specify only that territory, we should get
a locale specific to that territory. There are exceptions for various
reasons, but check that it's true in most cases, at least. In the
process, convert two QVERIFY(... == ...) into QCOMPARE(..., ...)
Task-number: QTBUG-64940
Change-Id: I7590f20f37b0b459aafb3d1d08f6eb77932fa027
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To be extended as neeeded.
Pick-to: 6.5
Change-Id: I57d2f55f67de073fe3e4916b7ba655342cf661dc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Just describe the row instead. We'd lose the original input in case of
failure, so I added a class to print that value on destruction. Example:
FAIL! : tst_QAlgorithms::countLeading64(0) Compared values are not the
same
Actual (qCountLeadingZeroBits(value)): 63
Expected (expected) : 64
Loc: [tests/auto/corelib/tools/qalgorithms/tst_qalgorithms.cpp(374)]
QWARN : tst_QAlgorithms::countLeading64(0) Original value was 0x1
Pick-to: 6.4 6.5
Fixes: QTBUG-109958
Change-Id: I69ecc04064514f939896fffd1738b1119cd80cf8
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
tst_qstringapisymmetry needs to use the same collation testability
criteria as tst_qcollator, that is, the locales that may be tested
without ICU and not on Mac nor Windows are only the system locale and
C locale.
Task-number: QTBUG-109954
Change-Id: I69f19ae28b3a16b3827c1eee62ae59fcfdf45209
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 4096667d66.
Reason for revert: <Screen shot workaround is flaky.>
Change-Id: I6e01cc584c094d0d0b8c1544b9daf72d648dd002
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
qcollator_posix.cpp is included if ICU is not used and the OS is not
Win nor macOS. Reflect that fact in tst_qcollator instead of using
alternative means which breaks with new platforms that use the
posix collator.
Task-number: QTBUG-109954
Change-Id: I592500ce9626efbcc9377cecf6641967f978c6da
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are numerous conflicting symbols in the tst_qstringbuilder\d
variants when batching those together. Remove the linkage from symbols
by putting the common include stringbuilder.cpp in an unnamed
namespace.
Task-number: QTBUG-109954
Change-Id: Ic2a745795b57482c90c9def7667a1145cdb19854
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Due to an XCB library change, QXcbBackingStore::toImage() cannot be
safely assumed to return an image identical to QWidget::grab().
The test functions fastMove(), moveAccross() and moveInOutOverlapped()
relied on QXcbBackingStore::toImage() and failed.
They were backlisted on Linux/XCB.
This patch obtains a screen shot instead of an image from the backing
store on XCB platforms. It processes events until the screen shot
matches QWidget::grab(). It makes the test fail only if the comparison
times out.
The patch also removes the BLACKLIST file, containing only the test
functions mentioned above.
Fixes: QTBUG-109036
Pick-to: 6.5 6.4
Change-Id: I26dd5b89dc62b313db066a285f6ad7d4d92baaf2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Also replace the C array with a std::array and (some) indexed loops
with ranged-for loops. Most loops need the index in one way of
another, so can't easily be converted to ranged.
Pick-to: 6.5 6.4 6.2
Change-Id: I7fa05f22de9df6c68ec5797c9583476a3881532c
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
(Un)Register the custom recognize in init() and cleanup() instead of
initTestCase() and cleanupTestCase(), so that a new recognizer is used
for each test function.
In the test functions, use a scope guard to unregister the locally
registered recognizers to make sure that in the case of a failing test
and early return, the recognizer is removed.
Pick-to: 6.5 6.4 6.2
Change-Id: I4fe9509f35474514ef55191d799e6707199fe853
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Setting a negative line width does not make much sense, but in
earlier Qt versions, this work the same as if the line width was 0
(just give you the minimal layout given wrapping constraints).
But since 991c056438, we check if
current width > line width at an earlier point, and because 0 > -1,
we would exit immediately before adding any characters to the text
line.
To restore the behavior in earlier versions, we set the minimum
possible line width to 0.
Pick-to: 6.5
Fixes: QTBUG-109474
Change-Id: Iceadd5135681f61b30de8221853834983941c5a4
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Reviewed-by: hjk <hjk@qt.io>
Clients who called the base-class implementation in QDialog would
as a result start hitting the canBeNativeDialog code path at the
start of QDialog::setVisible(), which would show the native dialog,
but without updating the QWidget visibility state.
To keep things 100% compatible, we shuffle the implementation of
QDialog::setVisible() into QDialogPrivate, which allows us to
override it in QMessageBoxPrivate and QErrorMessagePrivate.
The existing subclasses of QDialog that override setVisible have
been left as is, to not cause any unintended behavior change.
Pick-to: 6.5
Change-Id: Icafe31a7b84a75049365e4e04b80492de08614d2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When the test is showing the error message over and over, it's not
waiting for the native dialog to actually become visible, and as
a result, hiding it has no effect and won't result in a call
to processResponse, where we got rid of the native dialog.
To fix this we explicitly release the native dialog when
encountering this corner case.
Add logic to QErrorMessage to test both native and non
native dialogs.
Pick-to: 6.5
Change-Id: I19ac3f463997aed1e66f646fdfcbb4d2459116d1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In case of QT_FEATURE_timezone=OFF test should not be built
Change-Id: If667b9edb1d670b9ed8a62f301a7e5e21e7d2b4c
Reviewed-by: Kimmo Ollila <kimmo.ollila@qt.io>
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
The multi-thread snippet in the documentation, when copied as is,
could actually crash because of the race condition between the main
thread and the thread that generate results for the promise.
This is fixed by explicitly calling QPromise::start().
Actually, the underlying snippet already has this call, it just was
not included in the documentation.
This patch modifies the documentation snippet to include calls to
both QPromise::start() and QPromise::finish().
Fixes: QTBUG-109230
Pick-to: 6.5 6.4 6.2
Change-Id: Ic25f31a6b3b16ba6bc06a0b199289c8c5d50bab6
Reviewed-by: Sona Kurazyan <kurazyan.sona@gmail.com>
Support serializing shaders with specific qsb version. The default
behavior remains the same, using the latest version.
Task-number: QTBUG-101062
Pick-to: 6.5
Change-Id: I090a88c1ccb3be4ac5eee1da4058afaa8bf3111c
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Instead of the more verbose currentDateTime(QTZ::UTC).
Pick-to: 6.5
Change-Id: Ie759f4270b12fca39c458bf85c8296f5342033db
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To support cancellation of continuations attached via the parent future,
we store a pointer to continuation future's data in parent. This
requires preserving the lifetime of continuation future's data while the
parent is still alive (see 24dedaeaa1).
This is achieved by capturing the promise in the continuation's lambda,
which is only cleaned up after the parent's data is destroyed. This is
already the case for continuations without context, but was overlooked
for continuations with context: they transfer the ownership of the
continuation promise to lambda passed to QMetaObject::invokeMethod(),
which destroys the lambda's context after it's run. As a result, the
continuation's promise (and data, if there are no other copies of it)
is also destroyed, leaving the parent pointing to deleted continuation
data.
To fix this, capture a copy of continuation future's ref-counted data in
the continuation's lambda. This will guarantee that the continuation
data remains alive until the parent is destroyed and the continuation
is cleaned up.
Fixes: QTBUG-108790
Pick-to: 6.5 6.4 6.2
Change-Id: Ief4b37f31e652988d13b03499505ac65c7889226
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Not all locales use ASCII hyphen-minus U+002D as minus sign. On macOS
using the nb_NO locale the U+2212 character is used instead when
displaying negative years. Verify that one of the two characters is
found.
Fixes: QTBUG-109853
Change-Id: I424539cc8d427ac199b4528e44bef98e45312d07
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As discussed in the latest CMake API Review, we are deprecating the
FILENAME_VARIABLE variable name everywhere, and replacing it with
OUTPUT_SCRIPT.
[ChangeLog][CMake] The FILENAME_VARIABLE option of
qt_generate_deploy_script and qt_generate_deploy_app_script is now
deprecated, use OUTPUT_SCRIPT option instead.
Change-Id: Ic8be33eefbc48540166ea0fcf1d1948b052d4b8a
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
These are time stamps, and they use toMsecsSinceEpoch(), no point
getting the time in Local time zone then converting it.
Change-Id: I2db2db5f9ebc062e65514a592fa7fa00cf1d179d
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is inherently faster than getting it in UTC from the underlying
native API stat call, then converting it to the Local Time Zone just to
compare them. The same goes for any use-case where you get a QDateTime
then the first thing you do is call t.to{Msec,Secs}SinceEpoch().
Change-Id: Ic13bcfd99b937c9f10f102ea7741832950a553c6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
If an item in a list view has a null icon, then the decorationSize gets
calculated as -1, -1. The style would then try to wrap the text to a
lineWidth of -1, ending up in an infinite loop in viewItemTextLayout.
To prevent that, don't set the HasDecoration flag of the style option
when the icon is null, and don't fall back ot the decorationSize unless
the flag is set.
Add a test for this particular item configuration. This also fixes the
widget baseline test with styles that don't provide all standard icons.
Pick-to: 6.5
Change-Id: I691db6abede9a9b2ad300f3ee7fbfdae5fb6097f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
Wayland omits optimizations tested in tst_QWidget::optimizedResizeMove()
and optimizedResize_topLevel() under certain circumstances, e.g. on
Ubuntu 22.04 / Gnome. This makes the test functions fail.
This patch skips the test functions on wayland platforms, if an
omission is detected.
This amends 2ec7a6322f.
Fixes: QTBUG-109746
Pick-to: 6.5 6.4
Change-Id: If0df6b1cf451a7f0dccfc1bb7411e895d7ae29a3
Reviewed-by: Liang Qi <liang.qi@qt.io>
QWindow::requestActivate() is not supported.
This amends c95de359b4.
Task-number: QTBUG-107153
Pick-to: 6.5 6.4
Change-Id: I45f53b5e9de85049ca41cc139a78a82450f53bed
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test function used to flake on Linux occasionally.
8e6ede7cd1 provided a fix. While it
seemed to work, further analysis has shown that the root cause is
event sequence in case of multiple paint events.
This patch re-engineers the test function:
1. Allocate test widget on the stack instead of the heap.
2. Send layout requests posted by QHBoxLayout constructor and
QLayout::addWidget() before showing the widget.
3. Remove calls to QCoreApplication::processEvents().
They are unnessecary, because
- the size hint request counter is supposed to increase (by any number)
- QTRY_VERIFY processes events anyway until the counter increases or it
times out.
Pick-to: 6.5 6.4 6.2
Change-Id: I54998483725cbdd4899ba6f5469d7dae0980ab1d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The test shows an application modal QMessageBox, but assumes that doing
so will be non-blocking, which for macOS is not the case (yet). Instead
of making the dialog window-modal, which would potentially affect the
logic of the test, we disable native dialogs. This should be fine, as
the purpose of the test is to test the is_closing logic of
closeAllWindows, which lives on a layer above the native dialogs.
Pick-to: 6.5
Change-Id: I6d627984a6ca452b876f34404b669fce41a00851
Reviewed-by: Doris Verria <doris.verria@qt.io>
With the methods that use helpers from qstring.cpp defined in the
latter.
Change-Id: I11d6b0bfb95efe34e56d33d2ecbfe8f4423a9e6c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Makes the pre-existing QFutureInterface functionality available via
the public QPromise API.
[ChangeLog][QtCore][QPromise] Added addResults() to report multiple
results at once.
Change-Id: I18e6ef2781df422020b9022d78d6c45107b01668
Reviewed-by: Sona Kurazyan <kurazyan.sona@gmail.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
In preparation to their deprecation / removal.
Change-Id: Ia073a9f7caabbc06063a1e416b23cdb12788b283
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If a type is trivially default constructible, QMetaType (and QVariant)
think that it can be built and value-initialized by zero-filling a
region of storage and then "blessing" that storage as an actual instance
of the type to build. This is done as an optimization.
This doesn't work for all trivially constructible types. For instance,
on the Itanium C++ ABI, pointers to data members are actually
value-initialized (= zero-initialized, = initialized to null) with the
value -1:
https://itanium-cxx-abi.github.io/cxx-abi/abi.html#data-member-pointers
This means that a type like
struct A { int A::*ptr; };
is trivially constructible, but its value initialization is not
equivalent to zero-filling its storage.
Since C++ does not offer a type trait we can use for the detection that
we want to do here, and since we have also decided that Q_PRIMITIVE_TYPE
isn't that trait (it just means trivially copyable / destructible), I'm
rolling out a custom type trait for the purpose.
This type trait is private for the moment being (there's no
Q_DECLARE_TYPEINFO for it), and limited to the subset of scalar types
that we know can be value-initialized by memset(0) into their storage
(basically, all of them, except for pointers to data members).
The fix tries to keep the pre-existing semantics of
`QMetaType::NeedsConstruction`. Before, the flag was set for types which
were not trivially default constructible. That included types that
aren't default constructible, or types that cannot do so trivially.
I've left that meaning unchanged, and simply amended the "trivial" part
with the custom trait. A fix there (to clarify the semantics) can be
done as a separate change.
Change-Id: Id8da6acb913df83fc87e5d37e2349a4628e72e91
Pick-to: 6.5
Fixes: QTBUG-109594
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QDockWidget::createTestWidgets did not set a minimum size for
test widgets. Upon unplugging, that can lead to a size correction in
connection with 8687c3f938cac56c4a2518576a5c9fac150d8de1, if the widget
gets too narrow to correctly display window handles. Test functions
checking the size after unplugging can fail in that case.
This patch sets a minimum size to each test widget created. The minimum
size corresponds to QStyle::PM_TitleBarHeight.
Task-number: QTBUG-106531
Pick-to: 6.5 6.4 6.2
Change-Id: I3e552b37416d57d8ed30e0b9de4eec55f07ea158
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Turns out we don't support QStringView/QUtf8StringView comparison, and
the only reason the corresponding test succeeded was because it
contained a typo (QStringView instead of QUtf8StringView).
Fix the typo and disable the now-failing test.
Pick-to: 6.5 6.4 6.2
Change-Id: I2210a247aac66743851e53578172a563ee1e96f7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test function places a QSpinBox in a QHBoxLayout, which has a
QWidget parent. The spin box is expected to be shown with the widget.
While the widget is the layout's parent, the layout is not explicitly
set. That makes the test function flaky in some cases.
This patch adds QWidget::setLayout() to explicitly set the layout on
the widget.
Pick-to: 6.5 6.4 6.2
Change-Id: I3a1cc77c302c5ba96d3628d035139f9718dda9e5
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The existing symLinkTarget() always resolves the symlink target to an
absolute path; readSymLink() provides access to the relative path when
that is how the symlink references its target.
[ChangeLog][QtCore][QFileInfo] Added readSymLink() to read the symlink's
raw target, without resolving to an absolute path.
Fixes: QTBUG-96761
Change-Id: I360e55f1a3bdb00e2966229ea8de78cf29a29417
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
testWhiteSpaceNames() returns true for all current database drivers so
it's useless and can be removed. safeDropView() and getPSQLVersion()
is not called anywhere, getMySqlVersion() is only used for a check for a
MySql version we no longer support.
Change-Id: I8d02f17f475821e81d309ee96897e772cdfb895d
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The qt_findAtNxFile helper in qicon.cpp expects a local file name that
can be probed with QFile::exists. If the src attribute of an <img>
element specifies the location of the image as a file:/ or qrc:/ url
rather than as a local file name, then we need to strip the scheme
off the file path, and in the case of a qrc URL leave the :/ prefix
before calling the qt_findAtNxFile helper.
Amends, and partially reverts, 760df72565.
We can't avoid testing whether the source in the HTML is provided as a
URL before interpreting it as a file name.
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-109212
Change-Id: I7ea7a5bfde79bab90a8025c42e754129813dd0fc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QtBase didn't contain any checks for QT_RESTRICTED_CAST_FROM_ASCII, so
a recent addition to the QString::append/insert/prepend overload set
made calls with C string literal arguments ambiguous without the CI
noticing. We had a similar problem with QString::multiArg.
To increase test coverage, we now run tst_qstring two times:
- without any define
- with QT_RESTRICTED_CAST_FROM_ASCII (lots of changes necessary)
Most removals are expected, because they disable tests that check the
implicit conversions from QByteArray and const char*, but the
relational operators with QLatin1String objects might warrant fixing.
In some places, when the conversion wasn't the functionality under
test, replaced C string literals or QByteArrays with QLatin1String.
We should also test with QT_NO_CAST_FROM_ASCII, but that's even larger
surgery.
QString doesn't have a ctor from std::nullptr_t, so QString s =
nullptr; doesn't compile in C++17 mode, but does in C++20 mode, due to
the const char8_t* ctor.
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: I0c5a31719a4b8dd585dd748e0ca0d99964866064
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
ASan inserts a lot of function calls in between our calls, so they end
up in the backtrace and cause unexpected results.
Similar to c672f148db.
Fixes: QTBUG-109559
Pick-to: 6.4 6.5
Change-Id: I69ecc04064514f939896fffd1732dd2bc0317ae4
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We only need to skip the backtrace ones, because there's no library
called "Qt6Core".
Pick-to: 6.4 6.5
Change-Id: I69ecc04064514f939896fffd1732dd680058ba6e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reorganize them and fix the comment.
Pick-to: 6.4 6.5
Change-Id: I69ecc04064514f939896fffd1732dd57203cb21f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If an image source in HTML is specified via local file name or resource
path (i.e. without qrc prefix), then the correct image is loaded.
With file:/ or qrc:/ schema however, the image is either not loaded at
all, or the 2x image is not loaded. The qt_findAtNxFile helper in
qicon.cpp gets a URL path, but expects a file path (that can be tested
with QFile::exists).
Task-number: QTBUG-109212
Pick-to: 6.5 6.4 6.2
Change-Id: Ibcf687c69b3e53a10f21d718d28c8177a02d6be6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Amends 52ce0c177e, which added the test
without adding it to the parent directory.
Refactor the test code to be data driven, add the image files as
external test data files, and adjust the test code to find the files.
Use the QTextImageFormat from the document rather than a manually
crafted one, as otherwise we don't test a real usecase.
This also makes the test more flexible for adding qrc, resources, and
file URLs.
Task-number: QTBUG-109212
Pick-to: 6.5 6.4 6.2
Change-Id: Id0771037b961d95ec3cadd0cd6467d2448f22884
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
Behavior of EnterKey for virtual keyboard need to be changed for
QLineEdit. Before this commit, ImeOption was set to IME_ACTION_DONE.
Because of that, setting any text in QLineEdit automatically accept
QDialogs. That was annoying, when more than one QLineEdit need to be
set.
[ChangeLog][Widgets][Android] EnterKey type is now changed from
EnterKeyDefault to EnterKeyNext for virtual keyboard in QLineEdit. It is
done only if the focus can be moved to widget below.
Fixes: QTBUG-61652
Change-Id: I98a7686f9f675fccf0112b8d27d48ad8fd7a887f
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
... in lieu of <cctype>'s toupper(), which is locale-dependent, and
out-of-line.
The code doesn't run into the toupper(i) issue in the Türkiye locale,
because we don't run tests in that locale and because 'i' is not a
valid format specifier, but don't let the next reader of the code
guess when the use of toAsciiUpper() provides unambiguous guidance.
Task-number: QTBUG-109235
Pick-to: 6.5
Change-Id: I8988f5190441e1ae5cb57370952cda70ca6bb658
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This makes it possible to process QML files using qmlcachegen, and
retain the file nodes in the resource file system, but remove their
actual content from the binary. To do so, you need to mark your files
with the QT_DISCARD_FILE_CONTENTS source file property.
Fixes: QTBUG-87676
Fixes: QTBUG-103481
Fixes: QTBUG-102024
Fixes: QTBUG-102785
Change-Id: I93d5a2bfca1739ff1e0f74c8082eb8aa451b9815
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: hjk <hjk@qt.io>
If a widget's geometry is restored to a screen, which is smaller than
the one it was saved from,
- the widget could appear (partly) off screen
- the widget's title bar and resize handles could be inaccessible
This patch refactors and documents checkRestoredGeometry.
In a first step, the restored geometry's size is checked against
a given screen size. It is corrected if necessary.
In a second step, the restored geometry is moved inside the screen,
if necessary.
It makes the function a static member of QWidgetPrivate in order to
expose it for auto testing and adds a respective test function to
tst_QWidget.
Fixes: QTBUG-77385
Fixes: QTBUG-4397
Task-number: QTBUG-69104
Pick-to: 6.5 6.4
Change-Id: I7172e27bfef86d82cd51de70b40de42e8895bae6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Check for state.remainingChars to signal an encoding error only after
the last chunk has been processed. Splitting surrogates at chunk
boundaries is normal operation, not an error. Only if this happens at
the end of the whole input should we raise an error.
Amends fa2153bd10.
Pick-to: 6.5
Change-Id: Id92e37becaed25bbc11e0c22dedc4d41fb23f92a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
... not just those in the BMP.
The use of char32_t makes the isValid helper function easier to
read. Its passing to write() is enabled by the recent port to
QAnyStringView, which has a char32_t ctor.
Split into per-plane executions of the test function to avoid
running into timeouts on asan builds down the road.
As a drive-by, replace use of QPair with a proper struct, and
make the intervals symmetrically inclusive the bounds.
Pick-to: 6.5
Change-Id: I2c6858d7e6a88f448eac1b1e124d7d7b82828d4c
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Some more modern protocols like Bluetooth LE transmit data in little
endian. QtBluetooth will benefit from this.
Change-Id: Id8e48e8f498c4a029619fffd1728c94ddd444537
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This is inspired by QBluetoothUuid's quint128, but with a better
name. It also matches systemd's sd_id128.
Change-Id: Id8e48e8f498c4a029619fffd172893dc1545adda
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Relevant mainly if we want to consistently expose these as the
theoretically correct uint32_t/quint32 from Qt Quick's
QSGRendererInterface. (not that int is not sufficient for
indexing the typical 3-4 families and 2-16 queues per family)
Some checks are not actually needed since the family index
must always be valid after create().
Pick-to: 6.5
Task-number: QTBUG-108895
Change-Id: I474ccea51a81e7a096281604ff79b7db4cdd2484
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
qdbusxml2cpp takes a filename to use for generated output. It may be in
the form 'name.cpp' or just 'name'.
For the moc file we need to convert this from a path to a name of a file
in the same relative folder. It's not uncommon for this name to contain
dots as sometimes a dbus interface name is used directly. For the cases
where a suffix is not provided the whole name should be used.
Pick-to: 6.5
Change-Id: I3bf4ae8b2b9121184c2786009e8b5abcc5e3e410
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
WHEN writing an invalid character, THEN we expect the writer to report
an error.
The old code had it the wrong way around. It checked that WHEN the
writer reports an error, THEN the character was invalid.
The formulations are equivalent, but the latter is mixing up cause and
effect, making it less clear what's being checked (QXmlStreamWriter,
not isValidSingleTextChar()), so swap.
Pick-to: 6.5 6.4 6.2
Change-Id: I703de9ddde98d9913977a913f671472930735900
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Mate Barany <mate.barany@qt.io>
This improves the runtime of this particular test function by
almost 17% on my machine.
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: Icd77cdda92374b92121988c99e56787d405fa2d9
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
These tests exhibit weird crashes when run under ASan, but sometimes
they fail sometimes they don't. Pending more insight, just skip this
test under that configuration.
Fixes: QTBUG-109329
Change-Id: I49d940de419f7166aab0da0b8c2b44297c4b6d74
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
in our tests.
They are not needed anymore since
d20f4ae706 got merged and the
QT_ANDROID_PACKAGE_SOURCE_DIR property is read at generation time
rather than configure time.
This means the
qt_internal_add_test ->
qt_internal_add_executable ->
_qt_internal_android_executable_finalizer ->
qt_android_generate_deployment_settings
calls take care of generation the right value for the property even
with CMake 3.16.
Remove the direct qt_android_generate_deployment_settings calls,
in preparation for their deprecation in public api.
Pick-to: 6.5
Task-number: QTBUG-88506
Task-number: QTBUG-88840
Task-number: QTBUG-108508
Change-Id: Ief1d0f9f620bd37beeedde26dedb66f728fa4a6f
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Fixes issues with readback of storage buffers modified on GPU for D3D
and Metal. Adds unit test for storage buffer readback.
D3D
* Fixes issue where QRhiBufferReadbackResult::completed callback could
be called twice on buffer readback completion.
Metal
* Fixes issue where buffer readback occurred prior to command buffer
being committed.
Change-Id: If55ac005f4438d66d2f65ea2e1ee0d5686c884ff
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The object replacement character (U+FFFC) is used to represent
inline objects such as images in rich-text. To enable this,
we have special handling of it in QTextEngine. For classes
where inline images are not supported, it will just be hidden
from the visual text, which is unexpected.
Instead of always special-casing it, we make this dependent
on whether the document layout has registered any object handlers.
If they have not, then there will be no visual representation of
the object, and it is better to show the glyph for it.
For anything based on QTextDocument, there will always be the
image handler, so U+FFFC will still have special handling there,
but for non-rich labels and plain text editors the glyph will
be shown instead.
Note that there was also a bug in QLineEdit, where the object
replacement character was always replaced by a space. This was
introduced in 2007, in a patch which replaced a !ch.isPrint()
with a check for "the most obvious non-printable characters"
to reduce the number of characters that were not shown. However,
U+FFFC is a printable character and would thus not have been
filtered by the !isPrint() condition, so I think this was a
mistake at the time. However, due to the special-casing of
the character in Qt, it would not have had any effect until
now.
This also changes the QTextLayout::cursorToXForInlineObject()
test to actually test proper inline objects, as this was
previously using a hack which depended on the inline object
code to be used even for plain QTextLayouts with no handlers
for these.
[ChangeLog][Text] The object replacement character (U+FFFC)
is now only filtered out in rich text controls, where they
represent inline objects. In other controls, its glyphs will
be shown as with other text.
Pick-to: 6.5
Fixes: QTBUG-101526
Change-Id: I7fcaf2b10918feb41589e1098016efbf79a0e62d
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
QBuffer::open() was only documented as \reimp, so its behavior
regarding WriteOnly was never actually described.
Add a test and document the outcome.
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: I75c49cd3f6a1961bcaece4a92a4e479bb3300d36
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
tests/auto/corelib/text/qbytearrayapisymmetry/tst_qbytearrayapisymmetry.cpp:1174:80:
warning: overflow in expression; result is -9223372036854775808 with
type 'long long' [-Winteger-overflow]
const qlonglong longMaxPlusOne =
static_cast<qlonglong>(Bounds::max()) + 1;
tests/auto/corelib/text/qbytearrayapisymmetry/tst_qbytearrayapisymmetry.cpp:1175:81:
warning: overflow in expression; result is 9223372036854775807 with type
'long long' [-Winteger-overflow]
const qlonglong longMinMinusOne =
static_cast<qlonglong>(Bounds::min()) - 1;
I usually build with GCC, but building with Clang for clazy-standalone,
so I saw these two warnings 500+ times, enough already. :)
Change-Id: Idd86af568ffe89ae49b2a3f9bbeedf312de5e631
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It looks like AAssetDir_getNextFileName is not enough.
Directories that contain only other directories (no files)
were not listed.
On the other hand, AAssetManager_openDir() will always return a
pointer to initialized object (even if the specified directory does not
exists), so we can't just leave only it here.
Using FolderIterator as a last resort. This approach should not be too
time consuming.
As part of this fix, add some unit tests to cover/ensure assets
listing/iterating works as expected.
Fixes: QTBUG-107627
Pick-to: 6.4 6.2 5.15
Change-Id: Id375fe8f99f4ca3f8cad4756f783ffafe5c074df
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Silence warnings such as:
variable 'sum_lookup_visual' set but not used [-Wunused-but-set-variable]
Change-Id: If38515d9753cf7b79a250985890a139e96e92329
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Cocoa's columnArray::count is an unsiged int, resulting in a compile
warning when QCOMPARE'ed with a signed integer literal.
Change-Id: I420a9e89bba5feeb9d8a040a06e6ba0e209c82f3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Variant-selectors are special unicode symbols which are used to
modify glyph selection for the preceding character. For instance,
a regular symbol could be turned into a color emoji using VS16,
the emoji variation selector. In order for this to work, however,
the font that handles the selector has to handle the full pair of
characters, so that it can apply the correct substitution rules.
One specific example of this was on macOS, where an airplane
symbol + VS16 would match the symbol to the default UI font but
the VS16 to the emoji font. Since there string provided for the
emoji font did not have any preceding character for VS16, we just
ignored it.
To improve on this, we now detect variation selectors that have
been matched to different font engines than the preceding
character. When such a case occurs, we check if the selector font
also supports the preceding character, and if it does, we keep
the pair together and use the same font for both.
[ChangeLog][QtGui][Text] Fix some cases where a variation-selector
character would be ignored in font selection and the correct
variant of a character would thus not be selected.
Task-number: QTBUG-108799
Change-Id: I9f427e0520e652ee2f24a4f7dc3c1957251e06bd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add storage buffer memory qualifier and run time array stride information
to QShaderDescription::StorageBlock.
Memory qualifiers allow more informed selection of RHI resource buffer
binding (bufferLoad / bufferStore / bufferLoadStore) function.
Run time array stride (for last block member unsized array) allows
packing of buffer data for transfer to / from GPU. Without this
information, applications must infer or guess which packing rules
(std430 / std140) are in use.
Change-Id: I676d7e848afefd40d01cdd463c569b07022b683e
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
In the process actually handle all time-spec cases in various places
that only handled UTC or LocalTime, or at least note that they don't
where that's not practical. Also tidy up header ordering and ensure
QDateTime's header is included wherever it's used, while adding the
include for QTimeZone where needed.
Task-number: QTBUG-108199
Change-Id: Ic1a5cdf0aaf737bf1396aa8ac58ce2004cef7e19
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
As foreshadowed when QDateTime adapted to route all QTimeSpec use
through QTimeZone, this commit deprecates the old API in favor of the
newly more capable QTimeZone-based API.
Fixes: QTBUG-108199
Change-Id: I9a3f9f94d4a5d8cc229db72b3e4731a9e318a076
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Input events that originate from actual device interaction should reflect the
device's state, and device and events need to be kept in sync so that event
sequences (such as multi-touch events, where we have begin/update/end cycles
spanning multiple events) are working correctly.
For that reason, the event point data in pointer events is explicitly shared,
and we only detach in exceptional situations. This saves us memory allocations,
and makes sure that the event point data carried by events, and the event point
data stored persistently in the device, are kept in sync.
Cloned pointer events do not originate from device interactions, and should
therefore not sync back to the device. E.g. accepting a clone should not modify
the original event data stored in the device. There are exceptions here as
well, e.g. when cloning an event in Qt in order to deliver a translated version
of it to a different scene. Different points might even get delivered to
different scenes or windows, or at least different items in the same scene. For
that reason, we explicitly detach, and then explicitly write back the relevant
states after the cloned event has been delivered.
But in general, we should assume that cloned events do not write back to the
device. Since QEventPoint is an explicitly shared data type that never detaches
itself, we have to explicitly detach it when making copies that should not be
shared.
The ideal implementation of this would be to do the detach in the copy
constructor of QPointerEvent, which is called when cloning. However, Qt itself
makes copies of QPointerEvent without using clone, e.g. when assembling lists
of touch events for the different subscenes or windows in
QGuiApplicationPrivate::processTouchEvent, where event objects are added to a
QVarLengthArray<QMutableTouchEvent>. This makes copies, and those copies must
not detach.
So we have to implement the special cloning behavior in each override of
QPointerEvent::clone(). For this, introduce a dedicated macro for the common
member functions. This macro must be used for QPointerEvent subclasses.
Fixes: QTBUG-107560
Change-Id: I4b56f9e71c7d067ba9054a2a631e8ba5bc7b1ab9
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
XML does not impose any semantics based on the order of the attributes;
they're an unordered set. Quoting [1]:
> Note that the order of attribute specifications in a start-tag or empty-element tag is not significant
and [2] 2.2.5:
> An unordered set of attribute information items
Still, using a QHash-based implementation to store attributes is
annoying, because one cannot serialize the document in a stable way.
The order of attributes is going to depend on the QString hash function
(which we can change at any time) and the QHash seed (which is random
and changes at every run). In other words, saving the same DOM will
yield non deterministic outputs. That's annoying for testing,
reproducible builds, and so on.
Switching to an _ordered_ associative container for storing attributes
won't, on its own, ensure any specific ordering. That's because:
* attributes are currently kept associated using their name as the key,
ignoring an eventual namespace prefix;
* there's some convoluted logic that sometimes emits attributes in the
xmlns namespace (to qualify a prefix).
Hence, just go for the straightforward implementation and sort the
attributes before streaming them. In the main loop I could have used a
range-based for loop over the associative container used for attributes;
since it's a Qt container, it would have yielded just the values in the
map, and we are not interested into the keys. However I'm preparing for
further changes down the road, so I'm opting for key/value iteration.
I'm deliberately not offering an opt-out because:
* I don't think this is so expensive to justify an opt-out;
* I'm going to remove QHash anyways in a follow up commit.
[1] https://www.w3.org/TR/xml11/#sec-starttags
[2] https://www.w3.org/TR/xml-infoset/#infoitem.element
Task-number: QTBUG-76800
Task-number: QTBUG-25071
Change-Id: I6282ae2ccbee9c0099f138de48b94bb7c40b3680
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In the process, centralize the creation of date-time values, where
doing so requires catching invalid results caused by spring-forward
gaps; this saves some repetition and extends the treatment to more
places that did need it. Also, de-inline two overrides of virtuals;
being inline does them no good.
Replace the Qt::TimeSpec member of QDTEPrivate with a QTimeZone so
that creation of values can be streamlined and to make it easier to
add support for (currently unsupported) OffsetFromUTC and TimeZone
timespecs in the public QDTE API.
This greatly simplifies a lot of the code, while preparing it for a
long-needed extension to its functionality.
Task-number: QTBUG-80417
Task-number: QTBUG-108199
Change-Id: I0ac2c78025013bf89899e3ef1a56e89392f67ce5
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This saves (mostly in corelib/time/) some complications that used to
arise from needing different code-paths for different time-specs.
Task-number: QTBUG-108199
Change-Id: I5dbd09859fce7599f1ba761f8a0bfc4633d0bef9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For now, just addDays() and the springForward() test, as proofs of
concept for future work to be more systematic.
Change-Id: Id2c4e9ad304d3aef6fdfb48ae6328df8c638c934
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Free most APIs using QTimeZone from feature timezone and route all
APIs taking a naked QTimeSpec via these, in preparation for their
eventual deprecation. Since qtimezone.h includes qdatetime.h (and MSVC
blocks our ability to remove the need for that), qdatetime.h's
declarations can't use a default value for QTimeZone parameters; so
add overloads taking no zone (or spec) to handle that.
[ChangeLog][QtCore][QDateTime] All QDateTime APIs involving a
Qt::TimeSpec can now be routed via QTimeZone's lightweight time
description support, saving the need to have different code paths for
different time specs. In the process, QDateTime gains a
timeRepresentation() method to return a QTimeZone reporting the
(possibly lightweight) time description it uses. (The older timeZone()
method always returns a non-lightweight QTimeZone, whose timeSpec() is
Qt::TimeZone.)
Task-number: QTBUG-108199
Change-Id: I23e43401eb2dbe9b7b534ca6401389920dd96b3c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QTimeZone] QTimeZone is now always defined;
feature timezone now controls most of its prior API and some new API
is added, most of it always present, to enable QTimeZone to package a
Qt::TimeSpec and, for Qt::OffsetFromUTC, its offset. Prior to this
change, APIs using Qt::TimeSpec had to provide a separate function
taking a QTimeZone alongside a function taking a Qt::TimeSpec and
optional offset; it will now be possible to unify these into a single
function taking a QTimeZone. Adaptation of other Qt classes to do so
shall follow.
Task-number: QTBUG-108199
Change-Id: If5ec3cc63920af882ebb333bf69cde266b1f6ad7
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
... where 50b05e3e2a originally added
them.
While qtversion.h is included in qglobal.h, using qtversion.h directly
is a tiny step towards removing qglobal.h includes from our code-base,
so don't let this opportunity go to waste.
Change-Id: I28eaca1f4e250fc9e12e2ce6a6f94670a1d08dbe
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This test makes use of a GCC extension-slash-defect in matching of
template template parameters. Either Clang has recently changed its
behavior not to accept them any more, or we've never compiled this test
with Clang.
Tested with Clang 15.0.6.
Pick-to: 6.4
Change-Id: I69ecc04064514f939896fffd172e98d826989ca3
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The 'QT_ANDROID_MULTI_ABI_FORWARD_VARS' variable allows to forward
variable values to ABI-specific external projects. The variable accepts
names of variables that needs to be forwarded.
Pick-to: 6.4
Task-number: QTBUG-107893
Change-Id: Iaa4fa7e98ad0df956d90f91e157edb561183c795
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add the full set of substringing operations:
- mid/left/right (old-style)
- sliced/first/last (new style)
- chop/chopped/truncate
The implementation is copied from QUtf8StringView, adjusted to use
sliced() instead of the (ptr, n) ctor, so we need to deal with the tag
twiddling only once, in sliced().
The documentation is also copied from QUtf8StringView.
[ChangeLog][QtCore][QAnyStringView] Added substring functions
sliced(), first(), last(), chop()/chopped(), truncate().
Change-Id: Ief454e9694519e97d9146fa84bc05dda1dded046
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test message sent to the dbus might never see a reply, e.g. in case
of a misconfigured dbus. Instead of waiting for a reply and stopping the
static top-level build, timeout after the CI had enough time to receive
the dbus message (5 seconds).
Change-Id: Ic6d60e7d1ddb2d864dc4a78d4edbd0ef7b6604c2
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Amends a874087504, which tested whether
d->container is nullptr to decide whether to hide the popup, and then
dereferences d->container later without checking again. This raised a
correct static analyzer warning.
Simplify that logic. hidePopup() does nothing if there is no visible
container, and we don't want to accept() the cancel key if there isn't.
So the closeOnCancel logic isn't actually needed, we only need to accept
the ShortcutOverride to make sure that QComboBox sees the Cancel key
even if there is a shortcut registered, and then we can handle and
accept the cancel key to call hidePopup() only if the popup is visible.
Add test to verify that this interaction works as expected.
Pick-to: 6.4
Task-number: QTBUG-108908
Change-Id: I60d92b068f0f5139d629cf4a58e225512170df77
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In the process, split some long lines. The test relies on omitting the
hour (so as to get the default, 0) from both the format string and the
string parsed, so as to test that the parser correctly handles the
corner case where the zone skips the first hour of the day. This was
not entirely obvious when reading the row data, so make it explicit in
a comment.
Change-Id: I919b292b78bd399a8749806a0e913d43f5b414e1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mate Barany <mate.barany@qt.io>
Test a few more cases are correctly handled.
Change-Id: I7f286ba93f59bf0168cac789cd30590f40e98cee
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The spec deseralized isn't a Qt::TimeSpec; handle it correctly instead
of taking for granted that QDateTimePrivate::Spec's values happen to
match.
Change-Id: I67f3c960f3a3b90cdad3c1eca673f7ec8fd10b82
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Mostly pedagogic checks in operator_insert_extract(), but also
sanity-checking, to confirm spec conversions produce results equal to
what each came from.
In daylightTransitions(), verify the spring forward goes from standard
time to daylight-saving time.
Change-Id: Ieb9c603ee2eadecea055da4e8889528161f4d999
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QCOMPARE(a, b) in place of QVERIFY(a == b), similar with
QCOMPARE_LT() and QCOMPARE_LE(); and use a scope-guard to emit a
message on failure instead of incurring the cost of building a string
for the message, even when the passing test doesn't need it.
Change-Id: I3884bc40e89a4b1ba881968b99faab27d4b1abc9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Principally to get Qt::LocalTime mentions out of the way ahead of the
QTimeZone work on Qt::TimeSpec, but also mop up trailing 0 parameters
to QTime for seconds and milliseconds.
Change-Id: I51041582faae100894a567c9e5ae96a60a3b2d8c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Mate Barany <mate.barany@qt.io>
Left over from long ago, making confused use of Qt::hex.
Change-Id: I7f411e4888ee1a637d2212fd6976dd003f8da9ce
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Several were overlong (or soon to get so by being made longer); others
were inconsistent with neighbors; one was inconsistent with itself.
Change-Id: I272680499605a757e4827d27021bf234a91cf77a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As a result, also make sure the test will fail if output to debug
stream doesn't produce the expected result.
Change-Id: I9914c9c41c8d8b79f32dfb8e0c735f12e2d59f5e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Put core includes all in a common form, sort alphabetically.
Remove a stray blank line.
Change-Id: I211c6b407f5e49d907cb065521883567f1dd30f4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Comparing to true and false doesn't enrich the output.
Change-Id: Ie26a3f3d584f88310b8d4a31cad07be8dc8cb646
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Same fix as in tst_qbytearray's QCOMPARE() in
cb9715557c.
Pick-to: 6.4 6.2
Change-Id: I2222d9015ae7121a2fbcf5b936b27de20e873064
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
After this change, private CMake scripts are mostly live in
`libexec/`, except the `qt-cmake` which will stay in `bin/`.
This doesn't affect the Windows configuration.
- `qt-cmake` stays in `bin/`
- `qt-configure-module` moves into `libexec/`
- `qt-cmake-private` moves into `libexec/`
- `qt-cmake-private-install.cmake` moves into `libexec/`
- `qt-cmake-standalone-test` moves into `libexec/`
- `qt-internal-configure-test` moves into `libexec/`
In cases where `QT_GENERATE_WRAPPER_SCRIPTS_FOR_ALL_HOSTS` is set to
ON, e.g., ANDROID, WASM, both Batch and Bash files will be generated
and placed in `bin/` and `libexec/` accordingly; in both cases,
qt-cmake and qt-cmake.bat will be in `bin/` anyway.
[ChangeLog][CMake] The private Qt CMake scripts, i.e.,
qt-configure-module, qt-cmake-private, qt-cmake-private-install.cmake,
qt-cmake-standalone-test and qt-internal-configure-test were moved
into $prefix/libexec on Unix platforms.
Fixes: QTBUG-107621
Change-Id: Ic4f4ec85f64d2ede0e208bca928959e30be906a6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This amends fccd419dd6.
If Harfbuzz failed on one of the items in a string and returned
zero glyphs, then we would exit the shaping loop. The mentioned
change fixed a crash related to this when the ignored character
was the only character in the string, but it occurred in a
subitem of a longer string, then we would return and fail to
lay out the rest of the string.
This popped up recently because an update to Harfbuzz has caused
it to return zero glyphs when applying the Apple emoji font to
an isolated variant character (see bug report). When we matched
the symbol to the main font and only the variant character to
the emoji font, we would get in this situation, and end up
exiting the shaping early.
[ChangeLog][QtGui][Text] Fixed a regression which would
sometimes cause text to disappear if the string contained
an unmatched variation selector character.
Pick-to: 6.4
Fixes: QTBUG-108799
Change-Id: I616ab1b2d33c2df731419c5ce06fbc578a625a32
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When Harfbuzz returns zero glyphs, this will typically be because
the character is ignored. We currently have no way to differentiate
this from actual error cases, so to avoid return the error glyph
for cases which are not really errors, we set the dontPrint flag
for this.
When we add a way to differentiate between error cases and non-error
cases later, we should revert this for the actual errors.
Pick-to: 6.4
Task-number: QTBUG-108799
Change-Id: I2a910d951b71c705fb4dd761fcfe3a942b3afa7c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
There is no technical reason why qFatal shouldn't support categorized
logging, nor have a streaming version.
There is perhaps an API issue, that is, a streaming syntax may encourage
users to do "too much":
qFatal() << gatherLogs() << saveDatabase() << ...;
and that sounds like a bad idea in case the application is in an
unrecoverable state that requires immedate terminatation (indeed,
through qFatal). I'd err on the side of providing the extra convenience.
This commits adds overloads of QMessageLogger::fatal to support
categorized logging (note that fatal messages cannot be disabled),
the relative qCFatal macro, as well as overloads for streaming.
[ChangeLog][QtCore][QMessageLogger] QMessageLogger::fatal now supports
categorized logging, for instance using the qCFatal(category) macro.
Moreover, qFatal() and qCFatal() now support streaming of values
to be printed in the fatal message.
Change-Id: Ia57f25f5c85fca97e5fcf27eaa760dbde09cba0e
Fixes: QTBUG-8298
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For both the [4, 7] and [8,15] length cases, we can perform the same
technique: perform two overlapped loads, zero-extend, then perform two
overlapped stores. The 8-character case could be done in a single
load/store pair, but is not worth the extra conditionals. And it should
have the exact same performance numbers whether we use non-overlapping
4-character operations or completely-overlapping 8-character ones (I
*think* the full overlap is actually better).
The 4-character operation is new in this commit. That reduces the
non-vectorized, unrolled to at most 3 characters.
Change-Id: Ib42b3adc93bf4d43bd55fffd16c257ada774236a
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Add handling for MYSQL_TYPE_JSON by treating it the same as
MYSQL_TYPE_BLOB (which is used by current MariaDB Server for a json
column)
Pick-to: 5.15 6.2 6.4
Fixes: QTBUG-101680
Change-Id: I4d4b0cdad73cd12e0db4df4021fddbd6a649c8ed
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QWidgetWindow dispatched only tablet presses to the toplevel widget if
no child was found at the position; other events, such as hover events,
were discarded. The tabletTracking test case even documented that
shortcoming in a comment.
Fix that by falling back to the toplevel widget for any event. As
before, only press events initialize the tablet grabbing target widget.
Remove the now unneeded parent widget from the test case, and move the
test class into the only test function that uses it.
Amends ea615b421b and
8fd6cef372.
Pick-to: 6.4
Fixes: QTBUG-108747
Change-Id: I79050f1e063931e439945f64b50712dcc1ecb18c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
For QSet, the key_type is const, so can't test assiging to it.
Pick-to: 6.4
Change-Id: I9d363ef3fe52646b937d6a422227b19c48fdaf1f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Because they are too convenient to leave out.
Change-Id: I844cfb794ce0f575c2c65075d9051b0b878a434f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make sure that touching any file that is part of a qrc resource
actually rebuilds the resource and the target that depends on the
resource.
Pick-to: 6.4
Task-number: QTBUG-107687
Task-number: QTBUG-108113
Change-Id: I1153dc13fee44ffe59d2685a8cb33303538b026c
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Overloading insert is a bit tricky since the size might change after
the conversion so either the tail has to be moved twice or a temporary
buffer is needed. For now, add an ineffective but simple overload as in
the case of the const char *s overload, and do the performance
optimization in a follow-up task (QTBUG-108546).
[ChangeLog][QtCore][QString] Added insert(QUtf8StringView) overload.
Task-number: QTBUG-103302
Change-Id: If01c216ff626da29abb43eb68d4de82824f3bfba
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The += operator is already overloaded to handle QStringView and
QLatin1String - add the missing QUtf8StringView overload.
[ChangeLog][QtCore][QString] Added operator+=(QUtf8StringView)
overload.
Task-number: QTBUG-103302
Change-Id: Iec6940bad7866310c826a130b98accebc3c82aa8
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Add the missing overload, among other things it is needed to
implement QTBUG-103302.
[ChangeLog][QtCore][QString] Added append(QUtf8StringView)
overload.
Task-number: QTBUG-103302
Change-Id: I576f73c1919e3a1f1a315d0f82c708e835686eb1
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
For the case of static builds. Also, remove somewhat funny comment
from the shared tlshelpers.h file.
Fixes: QTBUG-105046
Pick-to: 6.4 6.2
Change-Id: I2fd677a11b64df89c0ad0237e1014f5e80144c24
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test functions tst_QWidget::optimizedResizeMove and
tst_QWidget::optimizedResize_topLevel use a custom widget to record
paint events in a boolean.
Using QTRY_* or qWait() to wait for the boolean to become true stops
event processing upon consumption of the first paint event.
In case of multiple paint events, the next paint event will be recorded
in the next check and may lead to a wrong result.
This leads to flakiness on platforms generating multiple paint events,
openSuSE Leap 15.4 / XCB being one of them.
This patch replaces the boolean with a counter. It adds a
waitForPaintEvents method to the custom class, which processes events,
until the counter stops increasing. It returns true when paint events
have been recorded and false otherwise. It resets the counter after
each call.
It also removes the QSKIP on wayland, as the failure results from the
same reason.
Fixes: QTBUG-109093
Pick-to: 6.4
Change-Id: I59ee8bb4efeaf5417d5749d21e384bee89301ae0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Also add optimizations for more string comparisons and add tests and
benchmarks.
[ChangeLog][QtCore][QString] Added utf-8 case-insensitive comparisons
Fixes: QTBUG-100235
Change-Id: I7c0809c6d80c00e9a5d0e8ac3ebb045cf7004a30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
During the implementation of QString::append(QUtf8StringView) it has
become apparent that the testing is insufficient as it did not warn
about an extra growth. The following tests have been added that append:
- y-umlaut and greek letter small theta (2 UTF-8 code units => 1 UTF-16)
- devanagri letter ssa (3 UTF-8 code units => 1 UTF-16)
- chakma digit zero (4 UTF-8 code units => 2 UTF-16 code units)
- some combinations of the above
Pick-to: 6.4 6.2
Task-number: QTBUG-103302
Change-Id: I981213c296bafc81663b08c0f1f339bbd8a96485
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
During the implementation of QString::append(QUtf8StringView) it has
become apparent that the testing is insufficient as it did not warn
about an extra growth. The following tests have been added that append:
- y-umlaut and greek letter small theta (2 UTF-8 code units => 1 UTF-16)
- devanagri letter ssa (3 UTF-8 code units => 1 UTF-16)
- chakma digit zero (4 UTF-8 code units => 2 UTF-16 code units)
- some combinations of the above
Pick-to: 6.4 6.2
Task-number: QTBUG-103302
Change-Id: I3d81cf10b7eb74433ce5bea9b92ce6bce1230dcd
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
During the implementation of QString::append(QUtf8StringView) it has
become apparent that the testing is insufficient as it did not warn
about an extra growth. The following tests have been added that append:
- y-umlaut and greek letter small theta (2 UTF-8 code units => 1 UTF-16)
- devanagri letter ssa (3 UTF-8 code units => 1 UTF-16)
- chakma digit zero (4 UTF-8 code units => 2 UTF-16 code units)
- some combinations of the above
Note that this also affects operator_pluseq_data, which is basically
a wrapper around append_data.
Pick-to: 6.4 6.2
Task-number: QTBUG-103302
Change-Id: I09ed950e3f0e71ae9ae85a455f42e130887f1109
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Implements an adaptor from the notification signal of a Q_PROPERTY to
QBindable. The Q_PROPERTY does not need to be BINDABLE, but can still
be bound or used in a binding.
[ChangeLog][Core][Q_PROPERTY] Q_PROPERTYs without BINDABLE can be wrapped in QBindable to make them usable in bindings
Change-Id: Id0ca5444b93a371ba8720a38f3607925d393d98a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The test function tst_QComboBox::setPalette() tests if the QComboBox
correctly inherits its palette to its QLineEdit child, by directly
comparing both palettes after a palette change on the QComboBox.
If the application palette for both widget types contains brushes which
are either pixmap based or the resolve mask prevents them from being
copied, the direct palette comparison between parent and child fails,
despite of a correct propagation.
This patch sets a simple gray application palette for QComboBox and
QLineEdit at the beginning of the test. The QSKIP for macOS is
removed, because using simple palettes solves both issues.
Change-Id: I61d509745377306d6f8331dfc1ac189fc58cdedb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It started being recorded as flakey after making macOS 13 a significant
config in the CI, but it's unclear why the test was not failing during
the nightly testing leading up to that.
http://testresults.qt.io/grafana/goto/-AzSwMKVz
It has also been blacklisted on macOS many times in the past.
Change-Id: I7be5fefb3669e9643a98d2ac82059bf0576c6d5c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This test causes instability in the CI, but so far nobody could
reproduce it outside of that specific CI environment. Skip it for now,
and investigate the root cause later.
Pick-to: 6.2 6.4
Task-number: QTBUG-106906
Change-Id: Idbbc560236ac475fcb4fdd5980397393f7a95474
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When a widget's palette has different brushes in Active / Inactive
color groups, or it is pixmap based, multiple paint events are
triggered. This leads to unpredictable, double entries in
QWidgetRepaintManager::dirtyWidgetList().
This patch overrides event() of all test widgets and ignores
activation / deactivation events in order to make the entries of
QWidgetRepaintManager::dirtyWidgetList() predictable.
Pick-to: 6.4
Change-Id: I164d7ab4148551590ac3c50fcc3b9f98c5ac0535
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QXcbBackingStore::toImage() returns a QImage that differs from what
is displayed on the screen: After multiple moves of children within
their parent widget, the last move is not always properly reflected
on openSuSE 15.4.
This patch blacklists the test functions fastMove, moveAccross and
moveInOutOverlapped on openSuSE Leap.
Task-number: QTBUG-109036
Pick-to: 6.4
Change-Id: Ideb505570df090b25d30762492d9c60beb6641ff
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
They are already slow without ASAN, and risk running into timeouts with
ASAN enabled.
Change-Id: I427b990066d8ffa838ea90a318176fbcba400852
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Both QStringView and QAnyStringView implicitly convert from any
container with a fitting value_type, and working std::data, std::size,
std::begin and std::end.
Add these missing operations (and complementary ones) to XmlStringRef,
so it implicitly converts to QStringView and QAnyStringView, too.
Add a check to that effect and remove the now-superfluous operator
QStringView().
Task-number: QTBUG-103302
Change-Id: I89d586cf64447a82022e06d546d7ee8339fc6dc7
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Avoid using perl in CMake scripts. Remove the syncqt.pl specific
code.
Task-number: QTBUG-87480
Change-Id: I7fcd5cc83d173ec463c275b5b50b84f25044a118
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
I've reserved the IDs for int128, uint128, bfloat16, and float128,
because the mask in qvariant.cpp's qIsNumericType() requires primitives
to be less than 64 to operate properly.
Added a QMetaType/QDataStream test to confirm it is indeed built-in.
Change-Id: I3d74c753055744deb8acfffd17247f7f57bada02
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The C++ equivalent is std::float16_t, defined in P1467[1], and is coming
with GCC 13 both in native mode (for x86, using AVX512FP16) and in
emulated mode. The C and C++ types will be the same type (<stdfloat>
simply typedefs).
qfloat16 will need to remain a wrapper with an integer member to keep
ABI with previous Qt versions. Because it is a trivially-copyable small
type, it gets currently passed in registers; the presence of the integer
member means it gets passed in general-purpose registers, while a single
_Float16 member would be passed in a floating-point register. See:
https://gcc.godbolt.org/z/8fEendjff
[1] https://wg21.link/p1467
Change-Id: I8a5b6425b64a4e319b94fffd161be56397cb48e6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
... where checks for QByteArray existed before.
The checks we can't add are
- left/right/mid (legacy APIs not implemented in QBAV)
- several relational operators, d/t ambiguities. Created
QTBUG-108805 to track these.
Task-number: QTBUG-108805
Pick-to: 6.4 6.2
Change-Id: I30cc9b29a228d69d32af51234f2c28221478a75c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
It's not intuitive, so check lest people break it.
Pick-to: 6.4 6.2
Change-Id: I2435cd69be7b77a6ae59cdc7b5fb99658cfc42fd
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It was forgotten to assign a simple palette to this object in
1576f82721
This patch adds the missing line.
Pick-to: 6.4
Change-Id: I0acf765d9646ecc8d49791d96b5ea910e11997fe
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We will need it in QML to determine which signal out of a number of
"overloads" to generate handlers for.
Task-number: QTBUG-108762
Change-Id: Ib73eeb59dbf037bd03faf0d841860d9ebc9e7032
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The algorithms for calculating the scene's position within the view
did not compensate for scrollbars showing. The scrollbars should be
ignored when positioning hte scene within the view, as alignment
only cares about the positioning of the scene when the view is
larger than the scene anyway.
Add a test case that verifies that items don't jump up or down when
dragging horizontally, and not left or right when dragging
vertically.
Mark variables in the modified function as const where applicable to
make it easier to follow the code.
Done-with: Volker Hilsheimer <volker.hilsheimer@qt.io>
Fixes: QTBUG-46757
Change-Id: If205637dfe124e0034f68201b23f174d6863084d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When a widget's palette has different active / inactive colors,
multiple paint events can occur. This makes tst_QWidget functions fail
when they expect a spcific amount of paint events and the platform
theme provides a palette with active / inactive differences.
This patch adds a function to populate test widgets with a simple
palette, to prevent multiple paint events.
Pick-to: 6.4
Change-Id: If9b2faedcc5ca87ba24991cedd5e4ac927b02644
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
After 109e088c7c, cache keys were unique
for palettes with different private or data instances, but the key did
not change when a palette without any shared copies was modified, as
that does not create new private data structures.
To fix this, always increase the counter for the private data structure,
also when not detaching from shared copies.
Augment test case with scenario that broke.
Pick-to: 6.4
Fixes: QTBUG-108709
Change-Id: I606abfb8b1a03e515e46b10dc840a631eb31d496
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: JiDe Zhang <zhangjide@uniontech.com>
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
Underflows should be treated the same as overflows.
Fixes: QTBUG-108628
Change-Id: I23aa7bbe1d103778cefca08bd3e584e72f306583
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The helper function TestWidget::waitForPainted returned after the test
widget had consumed the first paint event. In case of multiple paint
events, QRegion paintedRegions did not match the entire region that
was supposed to be painted. The test function children() failed/flaked
due to that.
This patch extends the helper function. After consumption of the first
paint event, it processes events until the painted regions no longer
change.
Pick-to: 6.4
Fixes: QTBUG-108764
Change-Id: I54e14bb07725dd1f602cc93085da13836e3b7494
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Rework QSimpleParsedNumber to store a qsizetype whose sign serves as
ok flag (positive is ok, zero and negative are not) and magnitude is
the number of characters used. This replaces an endptr that was set to
null to indicate !ok, but that deprived us of end-of-parse
information, which is needed for number-parsing. In particular, JS's
parsing of numbers accepts overflow (where qstrntod() flags it as
invalid) as infinity; so qstrntod() does need to say how long the
overflowing (but JS-valid, none the less) number-text was.
Modify all callers of functions using this (recently-introduced) type
and add tests that fail without this fix.
Fixes: QTBUG-108628
Change-Id: I416cd213e1fb8101b1af5a6d43615b970a5db9b4
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
tst_QOpenGLWidget fails on Linux when other windows on the desktop grab
focus. That can happen on CI VMs.
This patch blacklists the test on Linux as a temporary solution
Task-number: COIN-966
Change-Id: Ibdd7e626f92d2da692bd7c44741e0ca4c9dbd1a8
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
tst_gestures flakes in MacOS arm and Linux when delivering a gesture to
a screen. The problem cannot be narrowed down to specific test
functions. When two test functions with gesture delivery to a screen
are called, the second fails.
This patch temporarily blacklists OpenSuSE for tst_gestures.
Task-number: QTBUG-104496
Task-number: QTBUG-106244
Change-Id: I3bc3c9b82567478784a84006d27f5cbed39d9c9a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is improved version of previous fix
013c346a8d that was reverted because it
broke some tests for Quick Text. The problem was that it did not work
correctly in the case the text was wrapped to a fixed width.
To deal with this we'll accumulate current line full width (as if it
hadn't been wrapped) in layout data (layoutData->currentMaxWidth).
Then when the next line is explicitly wrapped by line or paragraph
separator, this accumulated width will be used to adjust layout's
maximum width.
Change-Id: Iad7119d9808e1db15fe1fbc5db049c3db928529f
Fixes: QTBUG-89557
Fixes: QTBUG-104986
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This reverts commit e36abea63b.
Reason for revert: QTBUG-108470
Change-Id: If9aeae8be67594320d00dcdb42c993eda7acaeef
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
- If this string is not shared, modify it directly
- If this string is shared, instead of detaching copy the characters
from this string, except the ones that are going to be removed, to a
new string and swap it. This is more efficient than detaching, which
would copy the whole string including the characters that are going
to be removed.
This affects:
remove(const QString &str, Qt::CaseSensitivity cs)
remove(QLatin1StringView str, Qt::CaseSensitivity cs)
Adjust the unittests to test both code paths.
[ChangeLog][QtCore][QString] Improved the performance of
QString::remove() by avoiding unnecessary data copying. Now, if this
string is (implicitly) shared with another, instead of copying
everything and then removing what we don't want, the characters from
this string are copied to the destination, except the ones that need to
be removed.
Task-number: QTBUG-106181
Change-Id: Id8eba59a44bab641cc8aa662eb45063faf201183
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In Qt 5, QWin(dows)Mime and QMacMime lived in the respective Extras
modules, which were removed and partially folded into the relevant
modules in Qt. QWindowsMime and QMacMime continued to provide the
abstraction for implementing built-in support for native clipboard
formats and UTIs within Qt, but only as private APIs.
After the recent clean up of those APIs and respective infrastructure,
we can now bring them back as public converter interfaces. Application
developers can subclass those and instantiate an instance of their
implementation to add support for platform or application specific
data formats.
These interfaces are not in the QNativeInterface namespace, as
applications don't call into Windows or macOS using those interfaces.
I.e. there is no class on which an application would call
auto *converter= nativeInterface<QWindowsMimeConverter>();
Also, since applications override those converter types, we do want to
guarantee binary and source compatibility.
[ChangeLog][QtGui][QWindowsMimeConverter] Reintroduced to allow
applications to add support for conversion from and to Windows-native
clipboard formats to MIME-encoded data.
[ChangeLog][QtGui][QUtiMimeConverter] Reintroduced to allow
applications to add support for conversion from and to clipboard data on
macOS and iOS to MIME-encoded data.
Fixes: QTBUG-93632
Change-Id: Iebd909c3970015d203f59d5ab15e306b3d312f6e
Reviewed-by: Yuhang Zhao <2546789017@qq.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Test causes integrations on macOS to fail.
Temporary solution, fixing of auto test required.
Task-number: QTBUG-108402
Change-Id: I9ceef8ec425cdd5131bce0cfffcb4daf739e674d
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Support for 1D textures on Vulkan, OpenGL, Metal, and D3D.
Change-Id: Ie74ec103da9cfcbf83fa78588cf8cfc1bd6e104f
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The native implementation uses NSAlert, making a best effort to map the
QMessageBox properties to the native dialog, falling back to the cross
platform non-native dialog if the discrepancy is too big.
The initial implementation focuses on the current state of the
native dialog helper "protocol", but there's room for improvement
here, which would allow even more dialog types and properties to
be native.
[ChangeLog][macOS] Message boxes such as QMessageBox now follow
the platform look and feel by using native dialogs if possible.
Change-Id: I4da33f99894194a7b301628cd1fbb44d646ddf18
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Skip on crashing tst_qvulkan test
Blacklisted completer_data on qfiledialog
(8d76c5af51 should have been enough but
it is still failing)
Task-number: QTBUG-108328
Task-number: QTBUG-108329
Change-Id: Iad5573af60cca16d16ba0462293e276186e25653
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This effectively reverts a4a51f6a64
while solving the problem that change intended to fix by an
alternative approach: Swap the order of checks for rhi-based
flushing. Checking the widgets' wishes first was a mistake. We should
first check what is forced, e.g. via the env.vars. Then only move on
investigating the child widget hierarchy if there was nothing specific
requested.
This way having a QOpenGLWidget in a window and running with
QT_WIDGETS_RHI=1 QT_WIDGETS_RHI_BACKEND=vulkan will prioritize the
forced request (Vulkan) and so the QOpenGLWidget will gracefully not
render anything while printing the expected warning to tell what's
going on.
The expensive recursion plaguing the construction of larger widget
hierarchies is now avoided, that should no longer take seconds due to
walking the entire widget hierarchy of the top-level window every time
a new widget is added to it.
However, this then uncovered a set of problems concerning native child
widgets. The repaint manager seems to have an obvious mistake where
the usage of rhi (and so textures and whatnot) is decided based on
'widget' (which is either a top-level or a native child) instead of
'tlw' (which is the top-level with the backingstore). The usesRhiFlush
flag only really matters for a real top-level, not for native child
widgets. The rhi-based flushing is tied to the backingstore, and the
backingstore comes from the top-level widget.
Finally, make the qopenglwidget autotest to actually exercise
something when it comes to QOpenGLWidgets (or their ancestors) turned
native. The original code from a long time ago does not really test
native child widgets, because it turns the top-level into native which
is quite superfluous since the toplevel is backed by a native window
(and a backingstore) anyway.
Pick-to: 6.4
Task-number: QTBUG-105017
Fixes: QTBUG-108344
Fixes: QTBUG-108277
Change-Id: I1785b0ca627cf151aad06a5489f63874d787f087
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
saveRestoreGeometry() somtimes creates a 29px offset when debugged in
Qt Creator, which makes the test fail.
This patch adds a code comment to make developers aware of this fact.
Pick-to: 6.2 6.4
Change-Id: I920bd02eb7543faf8b25a0a242b888f3a3745e2a
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
multipleToplevelFocusCheck() occasionally failed on XCB because
QApplication::activeWindow() was nullptr immediately after
qWaitForWindowActive() returned true.
This patch replaces QCOMPARE on QGuiApplicaiton::activeWindow() with
QTRY_COMPARE in order to continue spinning the event loop until the
condition has been met. It adds QWidget::activateWindow after show()
to ensure focus is acquired also when another window has received
focus in the meanwhile.
Pick-to: 6.2 6.4
Change-Id: If84eb8b77c5a6b16af271334a1fe5eb92c05644b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The test function raise() occasionally failed because of unexpected
paint events being counted.
This is due to a QTRY_VERIFY returning after consumption of the first
paint event. If more than one paint event got posted, it will be
delivered and counted when no more paint events are expected.
This patch ensures that all paint events are consumed before resetting
the count and expecting no more paint events.
Fixes: QTBUG-68175
Pick-to: 6.2 6.4
Change-Id: I3e91a34e851da4bd01c7429e824d2b9101077a06
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The uses of the click_cocoa_button() function was removed in 2012,
in ba21ca7b5b.
Change-Id: If7abfc56bb307cfbf9f6628cec9c7267a8a1f31f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This tests that strings using the first Unicode code-point of such a
multi-character token don't get recognized as "valid" number strings.
This would catch an implementation issue if the parsing code
mistakenly matched against only the first code-point of each "single
character" token.
It also adds tests of integer formatting, with multi-character sign,
and reworks some QStringView().toString()s to use u"..."_s.
Task-number: QTBUG-107801
Change-Id: I7b868ce2955bb322b3ecfc200438a21437090a0c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Upon programmatic window state changes, windowStateChange was fired
once in QWindow::setWindowStates and once when the visual state had
been changed by the window interface.
This patch adds if guards to ensure that the singal is fired only once.
It adds a corresponding autotest to tst_QWindow.
tst_QWidget::resizePropagation() is adapted to no longer expect double
signal emission.
Fixes: QTBUG-102478
Pick-to: 6.4 6.2
Change-Id: If093c0a883d76d8a676e4fab90db6b0676452267
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When a complex object (i.e. one with children that are themselves not
fully exposed objects) gets focus, then we need to inform the
accessibility system about which child object actually has focus. This
was only done for item views, but not for other complex widgets.
An editable QComboBoxes is the focus proxy for its line edit. The line
edit never gets focus itself (QComboBox forwards relevant events),
and is the accessible child item with index 1. So when an editable
combobox gets focus, it needs to raise the automation event for the
line edit child.
Implement QAccessibleComboBox::focusChild to return the interface to the
lineedit for editable comboboxes so that the UI Automation bridge can
correctly notify about the focus being moved to an editable text input
field.
Fixes: QTBUG-107572
Pick-to: 6.4 6.2
Change-Id: Id60e2791ec859365255baa9bfd01547979cd2b44
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
For a11y purposes, a table needs to be mapped into a logical
accessibility hierarchy. There are several ways of doing this mapping,
and unfortunately macOS expects something different than what
QAccessibleInterface does.
So suppose we have a a 2x2 QTableView with both horizontal and vertical
header like this (the names reflect the QAccessible::Role names):
+-----------+--------------+--------------+
| | ColumnHeader | ColumnHeader |
+-----------+--------------+--------------+
| RowHeader | Cell | Cell |
+-----------+--------------+--------------+
| RowHeader | Cell | Cell |
+-----------+--------------+--------------+
In order to be presented to the screen reader on a platform, it goes
through two rounds of mapping:
QAccessibleInterface will have all headers and cells as direct children of the table:
- Table
+- ColumnHeader
+- ColumnHeader
+- RowHeader
+- Cell
+- Cell
+- RowHeader
+- Cell
+- Cell
macOS expects a deeper hierarchy:
- AXTable [QAccessible::Table]
+- AXRow [Qt:no eqiuivalent]
+- [QAccessible::Cell] (The content of the cell, e.g. AXButton, AXGroup or whatever)
+- [QAccessible::Cell] (The content of the cell, e.g. AXButton, AXGroup or whatever)
+- AXRow
+- [QAccessible::Cell] (The content of the cell, e.g. AXButton, AXGroup or whatever)
+- [QAccessible::Cell] (The content of the cell, e.g. AXButton, AXGroup or whatever)
+- AXColumn (this seems to just store the geometry of the column)
+- AXColumn (this seems to just store the geometry of the column)
+- AXGroup (this represents the column headers)
+- AXSortButton (clicking a header cell will trigger sorting)
+- AXSortButton (clicking a header cell will trigger sorting)
It's unclear to me how RowHeaders are mapped (they are rarer than
ColumnHeaders, I expect to find them in e.g. spreadsheet applications).
I haven't found any native usage of them. So this patch simply ignores
them.
Notice that macOS have a three layer deep hierarchy to represent a table
(Table->Row->Cell), while QAccessibleInterface has a two-layer deep
hierarchy (Table->Row/Cell).
In the macOS bridge we therefore need to "inject" the Row/Column element
to be "between" the table and the cell.
The table will take ownership of all row and column elements that are
children of the table. These elements are not inserted into the cache
(it would be pointless, since the cache is basically just a mapping
between the QAccessibleInterface -> QMacAccessibilityElement, and the
row and column elements does not have a corresponding
QAccessibleInterface to be mapped from).
The rows and columns are therefore also created as soon as the table
element is initialized, and they are stored in two NSMutableArray
members of QMacAccessibilityElement.
A table is constructed like any other accessibility element, with a
valid axid and synthesizedRole set to nil.
Each child row and column element is constructed with the same axid as the
parent table element, and they will have the synthesizedRole set to
either NSAccessibilityRow or NSAccessibilityColumn.
With the synthesizedRole member we can then identify if we are a row,
column or the actual table, and implement their respective behaviors.
Notice that the child row/column is created with the parent's table axid
in order for them to have a way of finding their parent table element.
(there is no 'parent' member variable in QMacAccessibilityElement)
This glorious scheme isn't pretty, but seems to work.
Fixes: QTBUG-37207
Change-Id: I7c2451e629f5331b9a0ed61dc22c6e74a82cc173
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When comparing a glyphIndex with a hard coded number, the number is
cast to an int, whereas the glyphIndex is an unsigned int.
That causes a compiler warning.
This patch forces the numbers to be cast to an unsigned int.
Change-Id: I8a31124c6afacfc4ecfb13caf2cb8133dad44a21
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Debug serials and detatch numbers of deep and shallow detatch in test
function cacheKey, if it fails.
That implicitly removes a compiler warning about these variables being
unused.
Change-Id: I481f4b63e3ed0d50fb442dffc658b97d913059bc
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The usage of the helpers was removed in 2011,
in bf8dfc394a.
Change-Id: I950812982148fd76bcc65c4781a144c21cb3c901
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Most of them were easy to change. The pair one was a bit of a stretch,
but still worked. I've removed the lines on QPair, since QPair is
std::pair in Qt 6.
Change-Id: I3d74c753055744deb8acfffd17246ec98c583d08
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
qIsNumericType does not return true for enum types, which meant we never
called numericCompare() or numericEquals() when one of the types was an
enum.
Task-number: QTBUG-108188
Change-Id: I3d74c753055744deb8acfffd172449c68af19367
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The code implementing the C++ rules of type promotion and conversion
was too pedantic. There's no need to follow the letter of the standard,
not when we can now assume that everything is two's complement (this was
true for all architectures we supported when I wrote this code in 2014,
but wasn't required by the standard).
So we can reduce this to fewer comparisons and fewer rules, using the
size of the type, not just the type ID.
Change-Id: I3d74c753055744deb8acfffd172446b02444c0c0
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Generate bc file using the "new way".
Task-number:QTBUG-106331
Pick-to: 6.4
Change-Id: I70d2c0e5026636deee1b8389f50f51e075187b76
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
qWaitForWindowActive was called in two test functions without
activating the relevant widget.
This patch adds widget activation before calling
qWaitForWindowActive.
Helper function verifyColor:
A loop made six comparison attempts of widget size, pixel color and
image with a 200ms waiting time after each unsuccessful attempt.
The widget size was tested at the beginning of the loop.
The test was failed on the first size mismatch, which occurred when
verifyColor was called before the widget was rendered.
That has lead to flakiness (e.g. on openSuSE).
This patch encapsules each check in a lambda and calls qWaitFor to
ensure event processing until each condition has become true.
Change-Id: Ic98f93c8acf41459bc728f2969fe8b01768048dd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Follow-up to 8222e06d12, which only reset
the item repaint count.
Flushing the queued paint events will bump numRepaints, and the whole
point of calling reset() is to prepare a consistent state before the
next test, so we need to call it after flushing the events.
Pick-to: 6.2 6.4
Change-Id: Id1fe840c14c0940d7020cf8f8cc6a3aeceaa5fb5
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This patch replaces the first instance of QCOMPARE with QTRY_COMPARE /
QVERIFY with QTRY_VERIFY after a call to QWidget::grabGesture.
It re-groups verifications so that the verification of the highest
event count is on top.
The test function customGesture is skipped if
QGestureManager::deliverEvents cannot establish a target to deliver
the custom event.
Change-Id: I8188559a40ed5be86f3c6e9c82fa54a97ce5d7d6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The insets used to calculate the correct height were not the best
choice. It used display cutout insets which would work correctly on
most devices, but in the case of an emulator or a device without a
camera, it could fail to calculate correctly.
Task-number: QTBUG-107604
Task-number: QTBUG-107709
Task-number: QTBUG-107523
Pick-to: 6.4 6.4.1 6.2 5.15
Change-Id: I8c4da83ae7359a0c133dbeb02dbd2cd260565f78
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Flushing the queued paint events will bump numRepaints, and the whole
point of calling reset() is to prepare a consistent state before the
next test, so we need to call it after flushing the events.
Pick-to: 6.2 6.4
Change-Id: Iaefc9854caafe82c65c9587e18fd081439e8dda6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The qfiledialog test was failing on completer_data test. The fix
available for Android 11 also works in Android 7, so removed the if
clause.
Task-number: QTBUG-105377
Change-Id: I76a4c1073a754c9b299cfe731f42b80da1a6f8e2
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
It may take some time before the shown window is available through the
accessible hierarchy, so do an asynchronous test for that to happen.
Pick-to: 6.4
Change-Id: I3f312ae636505b805899973678b1bf10a65f96b3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There's no need to split it, we can use the -x compiler flag to build
the .cpp file as Objective-C++, or, as done here, just rename the file.
This allows us to use QVERIFY and friends, giving more precise failure reporting.
Pick-to: 6.4
Change-Id: I6fb1c4454335082c8a39010c5b75c59e6ec6561b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
When a compound widget is created not directly before its children,
then another widget will be in the focus chain between the compound and
the compound's first child. If one of those children is then made the
focus proxy of the compound, then the widget in between becomes
unreachable by tabbing.
To fix this, detect that we set the focus proxy to be a descendent of
the compound widget, and then move the compound widget directly in front
of its first child in the focus chain. This way we can't have any gaps
in the focus chain.
Augment the test case with a corresponding scenario. As a drive-by, move
the debug helper up in the code so that it can be easier used, and set
object names on relevant widgets.
Pick-to: 6.4 6.2 5.15
Fixes: QTBUG-89156
Change-Id: I17057719a90f59629087afbd1d2ca58c1aa1d8f6
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Basic unitttest and one to verify erase returns iterator, not
const_iterator.
Change-Id: I44c3b82b4686ff3809648063376f5e36fb7e181d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- If the string isn't shared, don't call detach(), instead remove characters
matching ch, and resize()
- If the string is shared, create a new string, and copy all characters
except the ones that would be removed, see task for details
Update unittets so that calls to this overload of remove() test both code
paths (replace() calls remove(QChar, cs) internally).
Drive-by change: use QCOMPARE() instead of QTEST()
Task-number: QTBUG-106181
Change-Id: I1fa08cf29baac2560fca62861fc4a81967b54e92
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- If this bytearray isn't shared call d->erase() as needed
- if it's shared, instead of detaching, create a new bytearray, and copy
all characters except for the ones that would be removed
See task for details.
Adjust unittest to test both code paths.
Task-number: QTBUG-106182
Change-Id: I806e4d1707004345a2472e056905fbf675f765ab
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 79a11470f3, which
resulted in QTBUG-105735. The new behavior is worse and affects multiple
screen readers, while the old issue is isolated to Windows Narrator and
could be considered a narrator bug.
Task-number: QTBUG-105735
Pick-to: 6.2 6.4
Change-Id: Ic8be1dbd592a3fdf2c3219ec4c5524bc2c7f0f6a
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
This is a semantic patch using ClangTidyTransformator as in
qtbase/df9d882d41b741fef7c5beeddb0abe9d904443d8, but extended to
handle typedefs and accesses through pointers, too:
const std::string o = "object";
auto hasTypeIgnoringPointer = [](auto type) { return anyOf(hasType(type), hasType(pointsTo(type))); };
auto derivedFromAnyOfClasses = [&](ArrayRef<StringRef> classes) {
auto exprOfDeclaredType = [&](auto decl) {
return expr(hasTypeIgnoringPointer(hasUnqualifiedDesugaredType(recordType(hasDeclaration(decl))))).bind(o);
};
return exprOfDeclaredType(cxxRecordDecl(isSameOrDerivedFrom(hasAnyName(classes))));
};
auto renameMethod = [&] (ArrayRef<StringRef> classes,
StringRef from, StringRef to) {
return makeRule(cxxMemberCallExpr(on(derivedFromAnyOfClasses(classes)),
callee(cxxMethodDecl(hasName(from), parameterCountIs(0)))),
changeTo(cat(access(o, cat(to)), "()")),
cat("use '", to, "' instead of '", from, "'"));
};
renameMethod(<classes>, "count", "size");
renameMethod(<classes>, "length", "size");
except that the on() matcher has been replaced by one that doesn't
ignoreParens().
a.k.a qt-port-to-std-compatible-api V5 with config Scope: 'Container'.
Added two NOLINTNEXTLINEs in tst_qbitarray and tst_qcontiguouscache,
to avoid porting calls that explicitly test count().
Change-Id: Icfb8808c2ff4a30187e9935a51cad26987451c22
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
- If this string isn't shared, don't call detach, instead use ->erase() as
needed
- If this string is shared, create a new string, and copy all elements
except the ones that would be removed, see task for details
Update unittest to test both code paths.
Task-number: QTBUG-106181
Change-Id: I4c73ff17a6fa89ddcf6966f9c5bf789753f6d39e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When 'this' is IPv6 and 'other' is Any then there is no point in testing
'other's IPv6 address.
Added extra tests against QHostAddress::Any*.
Pick-to: 6.4 6.2 5.15
Fixes: QTBUG-108103
Change-Id: I09f32b1b147b1ec8380546c91cd89684a6bebe2e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
With the introduction of QAnyStringView, overloading based on UTF-8
and Latin-1 is becoming more common. Often, the two overloads can
share the processing backend, because we're only interested in the
US-ASCII subset of each.
But if they can't, we need a faster way to convert L1 into UTF-8 than
going via UTF-16. This is where the new private API comes in.
Eventually, we should have the converse operation, too, to complete
the set of direct conversions between the possible three
QAnyStringView encodings L1/U8/U16, but this direction is easier to
code (there are no error cases) and more immediately useful, so
provide L1->U8 alone for now.
Change-Id: I3f7e1a9c89979d0eb604cb9e42dedf3d514fca2c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Borrowed from tst_qtemporaryfile with some changes.
Change-Id: I596ddd0ac8dbe10edd63e481198064dcec15d3e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qhashfunctions.h defines a catch-all 2-arguments qHash(T, seed)
in order to support datatypes that implement a 1-argument overload
of qHash (i.e. qHash(Type)). The catch-all calls the 1-argument
overload and XORs the result with the seed.
The catch-all is constrained on the existence of such a 1-argument
overload. This is done in order to make the catch-all SFINAE-friendly;
otherwise merely instantiating the catch-all would trigger a hard error.
Such an error would make it impossible to build a type trait that
detects if one can call qHash(T, size_t) for a given type T.
The constraint itself is called HasQHashSingleArgOverload and lives in a
private namespace.
It has been observed that HasQHashSingleArgOverload misbehaves for
some datatypes. For instance, HasQHashSingleArgOverload<int> is actually
false, despite qHash(123) being perfectly callable. (The second argument
of qHash(int, size_t) is defaulted, so the call *is* possible.)
--
Why is HasQHashSingleArgOverload<int> false?
This has to do with how HasQHashSingleArgOverload<T> is implemented: as
a detection trait that checks if qHash(declval<T>()) is callable.
The detection itself is not a problem. Consider this code:
template <typename T>
constexpr bool HasQHashSingleArgOverload = /* magic */;
class MyClass {};
size_t qHash(MyClass);
static_assert(HasQHashSingleArgOverload<MyClass>); // OK
Here, the static_assert passes, even if qHash(MyClass) (and MyClass
itself) were not defined at all when HasQHashSingleArgOverload was
defined.
This is nothing but 2-phase lookup at work ([temp.dep.res]): the
detection inside HasQHashSingleArgOverload takes into account the qHash
overloads available when HasQHashSingleArgOverload was declared, as well
as any other overload declared before the "point of instantiation". This
means that qHash(MyClass) will be visible and detected.
Let's try something slightly different:
template <typename T>
constexpr bool HasQHashSingleArgOverload = /* magic */;
size_t qHash(int);
static_assert(HasQHashSingleArgOverload<int>); // ERROR
This one *does not work*. How is it possible? The answer is that 2-phase
name lookup combines the names found at definition time with the names
_found at instantiation time using argument-dependent lookup only_.
`int` is a fundamental type and does not participate in ADL. In the
example, HasQHashSingleArgOverload has actually no qHash overloads to
even consider, and therefore its detection fails.
You can restore detection by moving the declaration of the qHash(int)
overload *before* the definition of HasQHashSingleArgOverload, so it's
captured at definition time:
size_t qHash(int);
template <typename T>
constexpr bool HasQHashSingleArgOverload = /* magic */;
static_assert(HasQHashSingleArgOverload<int>); // OK!
This is why HasQHashSingleArgOverload<int> is currently returning
`false`: because HasQHashSingleArgOverload is defined *before* all the
qHash(fundamental_type) overloads in qhashfunctions.h.
--
Now consider this variation of the above, where we keep the qHash(int)
overload after the detector (so, it's not found), but also prepend an
Evil class implicitly convertible from int:
struct Evil { Evil(int); };
size_t qHash(Evil);
template <typename T> constexpr bool HasQHashSingleArgOverload = /* magic */;
size_t qHash(int);
static_assert(HasQHashSingleArgOverload<int>); // OK
Now the static_assert passes. HasQHashSingleArgOverload is still not
considering qHash(int) (it's declared after), but it's considering
qHash(Evil). Can you call *that* one with an int? Yes, after a
conversion to Evil.
This is extremely fragile and likely an ODR violation (if not ODR, then
likely falls into [temp.dep.candidate/1]).
--
Does this "really matter" for a type like `int`? The answer is no. If
HasQHashSingleArgOverload<int> is true, then a call like
qHash(42, 123uz);
will have two overloads in its overloads set:
1) qHash(int, size_t)
2) qHash(T, size_t), i.e. the catch-all template. To be pedantic,
qHash<int>(const int &, size_t), that is, the instantiation of the
catch-all after template type deduction for T (= int)
([over.match.funcs.general/8]).
Although it may look like this is ambiguous as both calls have perfect
matches for the arguments, 1) is actually a better match than 2) because
it is not a template specialization ([over.match.best/2.4]).
In other words: qHash(int, size_t) is *always* called when the argument
is `int`, no matter the value of HasQHashSingleArgOverload<int>. The
catch-all template may be added or not to the overload set, but it's
a worse match anyways.
--
Now, let's consider this code:
enum MyEnum { E1, E2, E3 };
qHash(E1, 42uz);
This code compiles, although we do not define any qHash overload
specifically for enumeration types (nor one is defined by MyEnum's
author).
Which qHash overload gets called? Again there are two possible
overloads available:
1) qHash(int, size_t). E1 can be converted to `int` ([conv.prom/3]),
and this overload selected.
2) qHash(T, size_t), which after instantiation, is qHash<MyEnum>(const
MyEnum &, size_t).
In this case, 2) is a better match than 1), because it does not require
any conversion for the arguments.
Is 2) a viable overload? Unfortunately the answer here is "it depends",
because it's subject to what we've learned before: since the catch-all
is constrained by the HasQHashSingleArgOverload trait, names introduced
before the trait may exclude or include the overload.
This code:
#include <qhashfunctions.h>
enum MyEnum { E1, E2, E3 };
qHash(E1, 42uz);
static_assert(HasQHashSingleArgOverload<MyEnum>); // ERROR
will fail the static_assert. This means that only qHash(int, size_t) is
in the overload set.
However, this code:
struct Evil { Evil(int); };
size_t qHash(Evil);
#include <qhashfunctions.h>
enum MyEnum { E1, E2, E3 };
qHash(E1, 42uz);
static_assert(HasQHashSingleArgOverload<MyEnum>); // OK
will pass the static_assert. qHash(Evil) can be called with an object of
type MyEnum after an user-defined conversion sequence
([over.best.ics.general], [over.ics.user]: a standard conversion
sequence, made of a lvalue-to-rvalue conversion + a integral promotion,
followed by a conversion by constructor [class.conv.ctor]).
Therefore, HasQHashSingleArgOverload<MyEnum> is true here; the catch-all
template is added to the overload set; and it's a best match for the
qHash(E1, 42uz) call.
--
Is this a problem? **Yes**, and a huge one: the catch-all template does
not yield the same value as the qHash(int, size_t) overload. This means
that calculating hash values (e.g. QHash, QSet) will have different
results depending on include ordering!
A translation unit TU1 may have
#include <QSet>
#include <Evil>
QSet<MyEnum> calculateSet { /* ... */ }
And another translation unit TU2 may have
#include <Evil>
#include <QSet> // different order
void use() {
QSet<MyEnum> set = calculateSet();
}
And now the two TUs cannot exchange QHash/QSet objects as they would
hash the contents differently.
--
`Evil` actually exists in Qt. The bug report specifies QKeySequence,
which has an implicit constructor from int, but one can concoct infinite
other examples.
--
Congratulations if you've read so far.
=========================
=== PROPOSED SOLUTION ===
=========================
1) Move the HasQHashSingleArgOverload detection after declaring the
overloads for all the fundamental types (which we already do anyways).
This means that HasQHashSingleArgOverload<fundamental_type> will now
be true. It also means that the catch-all becomes available for all
fundamental types, but as discussed before, for all of them we have
better matches anyways.
2) For unscoped enumeration types, this means however an ABI break: the
catch-all template becomes always the best match. Code compiled before
this change would call qHash(int, size_t), and code compiled after this
change would call the catch-all qHash<Enum>(Enum, size_t); as discussed
before, the two don't yield the same results, so mixing old code and new
code will break.
In order to restore the old behavior, add a qHash overload for
enumeration types that forwards the implementation to the integer
overloads (using qToUnderlying¹).
(Here I'm considering the "old", correct behavior the one that one gets
by simply including QHash/QSet, declaring an enumeration and calling
qHash on it. In other words, without having Evil around before including
QHash.)
This avoids an ABI break for most enumeration types, for which one
does not explicitly define a qHash overload. It however *introduces*
an ABI break for enumeration types for which there is a single-argument
qHash(E) overload. This is because
- before this change, the catch-all template was called, and that
in turn called qHash(E) and XOR'ed the result with the seed;
- after this change, the newly introduced qHash overload for
enumerations gets called. It's very likely that it would not give
the same result as before.
I don't have a solution for this, so we'll have to accept the ABI
break.
Note that if one defines a two-arguments overload for an enum type,
then nothing changes there (the overload is still the best match).
3) Make plans to kill the catch-all template, for Qt 7.0 at the latest.
We've asked users to provide a two-args qHash overload for a very long
time, it's time to stop working around that.
4) Make plans to switch from overloading qHash to specializing std::hash
(or equivalent). Specializations don't overload, and we'd get rid of
all these troubles with implicit conversions.
--
¹ To nitpick, qToUnderlying may select a *different* overload than
the one selected by an implicit conversion.
That's because an unscoped enumeration without a fixed underlying type
is allowed to have an underlying type U, and implicitly convert to V,
with U and V being two different types (!).
U is "an integral type that can represent all the enumerator values"
([dcl.enum/7]). V is selected in a specific list in a specific order
([conv.prom]/3). This means that in theory a compiler can take enum E {
E1, E2 }, give it `unsigned long long` as underlying type, and still
allow for a conversion to `int`.
As far as I know, no compiler we use does something as crazy as that,
but if it's a concern, it needs to be fixed.
[ChangeLog][Deprecation Notice] Support for overloads of qHash with only
one argument is going to be removed in Qt 7. Users are encouraged to
upgrade to the two-arguments overload. Please refer to the QHash
documentation for more information.
[ChangeLog][Potentially Binary-Incompatible Changes] If an enumeration
type for which a single-argument qHash overload has been declared is
being used as a key type in QHash, QMultiHash or QSet, then objects of
these types are no longer binary compatible with code compiled against
an earlier version of Qt. It is very unlikely that such qHash overloads
exist, because enumeration types work out of the box as keys Qt
unordered associative containers; users do not need to define qHash
overloads for their custom enumerations. Note that there is no binary
incompatibity if a *two* arguments qHash overload has been declared
instead.
Fixes: QTBUG-108032
Fixes: QTBUG-107033
Pick-to: 6.2 6.4
Change-Id: I2ebffb2820c553e5fdc3a341019433793a58e3ab
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If we use winrt's factories we have to make sure to to clear the factory
cache when one of our dlls is unloaded or we will run into dangling
factory entries which might result in crashes. So we have to make sure
that winrt::clear_factory_cache is called on every dll unload.
In order not to increase compile times and dependencies too much
qfactorycacheregistration_p.h needs to be included in Qt code whenever
we use winrt's factory cache. A rule of thumb being: Include
qfactorycacheregistration_p.h whenever including winrt/base.h.
Other Qt modules which use winrt's factories need to be updated too.
Fixes: QTBUG-103611
Pick-to: 6.2 6.4
Change-Id: I7ab24e4b18bffaca653c5b7f56a66ce99212e339
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Some of the entries in QLocale's single_character_data[] table are
not, in fact, single characters; some RTL languages include
bidi-markers in some of the fields, some locales use some denotation
of "times ten to the power" as the exponent separator. There may be
further complications, but let's just get some tests in that verify we
are correctly serializing numbers in these locales. Include some
parsing tests to show that we are indeed failing them.
Task-number: QTBUG-107801
Change-Id: Iab9bfcea5fdcfcb991451920c9531e0e67d02913
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
%.f should be handled like %.0f. You probably don't want it for strings,
though.
Fixes: QTBUG-107991
Pick-to: 6.2 6.4
Change-Id: I07ec23f3cb174fb197c3fffd1721a941fbcf15e1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
I'm not entirely sure whether this is a toolchain bug or if this is
intended. This commit ODR-uses all the static inline variables in
QOperatingSystemVersion so they are added to the list of exported
symbols in QtCore.
On Windows:
$ objdump -p bin/Qt6Core.dll | grep Windows11E
[2534] _ZN23QOperatingSystemVersion9Windows11E
On Linux:
$ eu-readelf --dyn-syms lib/libQt6Core.so | grep Windows11E
1985: 0000000000575430 16 OBJECT GNU_UNIQUE PROTECTED 18 _ZN23QOperatingSystemVersion9Windows11E@@Qt_6
Pick-to: 6.4
Change-Id: Ia317fd249bcd80dbd02c198803a3a61178c0c219
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It seems the value name correction is not needed at all,
and we must not do such correction.
Amends commit 738e05a55a
Task-number: QTBUG-107794
Change-Id: I903a762aafab4b55275beb8438e6769285821567
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This amends 23780891a5 which moved the.txt
test to tets/auto/corelib/platform/android and kept the old location
mistakenly.
Pick-to: 6.4 6.2
Change-Id: If58422f9a94cfe4d6a941cc5453d8f0506057dcb
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Removes a warning in the build.
Pick-to: 6.4
Change-Id: I07ec23f3cb174fb197c3fffd17215c40b40333cb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The `rcc_PREFIX` will be set to `/` if it is not passed to the
function and it is not defined in `QT_RESOURCE_PREFIX`.
I also removed an unnecessary check of the `rcc_PREFIX`.
[ChangeLog][QtCore][CMake] The `PREFIX` parameter of the
`qt_add_resources` is now optional. If not passed, and
`QT_RESOURCE_PREFIX` is not defined, `/` will be used as the path
prefix.
Fixes: QTBUG-104938
Change-Id: I6524ab5dc54f035272e4c2e3154eb67591efb650
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This introduces a new helper function accessibleIdForAccessible
(inspired by Windows' automationIdForAccessible) to synthesize an id out
of the objectNames of the accessible parent chain. The id is then
exposed via the GetAccessibleId D-Bus function for consumption in a11y
tools.
Change-Id: If72b86c5864c43f4ca842aa11423dd8aea0dde4a
Reviewed-by: Aleix Pol Gonzalez <aleixpol@kde.org>
MySQL has a different default setting for case sensitive table names on
linux and windows which makes the test fail on linux but work on
windows when using the database with the default settings. Read out the
respecitive setting so the test will pass every time.
Change-Id: I8651858d47652022ddc4b6386a6153cf70c6fed6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The QHoverEvent ctor takes two points: pos and globalPos; pos is then
passed as both the scene and global pos to the QSinglePointEvent ctor,
which calls QMutableEventPoint::setScenePosition() on the persistent
QEventPoint instance and then detaches befeore setting ephemeral state.
Therefore, we must construct QHoverEvent with scene position first, not
local position, so that the right value is persisted; it's better to set
local position after the detach(), whereas it's too late to fix the
persistent point then.
Pick-to: 6.4
Fixes: QTBUG-106918
Change-Id: I45726a9ec05bba2fe0cde6f5fb87c269105caca6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
-1 is the default value for QSurfaceFormat::alphaBufferSize. Changing it
to 0 may result an unexpected pixel format change by ARB OpenGL
extension.
Pick-to: 6.4
Fixes: QTBUG-107629
Change-Id: Ia6a1b90fba6c43b6872b406f4fd946d937135cf8
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
There is no reason to use different style of quotes when printing
messages.
Change-Id: I7d513ec04c803702974054569d28f26947942fbf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Amends edd983071e.
Remove redundant calls to AAssetDir_getNextFileName() in
AndroidAbstractFileEngine::setFileName(). It's enough to check
if AAssetManager_open() returns null and AAssetManager_openDir() is
valid for the provided asset file name.
As part of this fix, add some unit tests to cover/ensure assets
listing/iterating works as expected.
Fixes: QTBUG-107627
Pick-to: 6.4 6.2 5.15
Change-Id: I37ae9cb64fbbc60699bb748895f77fd6a34fae1f
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
QWindow::requestActivate() is not supported.
This function crashed very often in ci/coin when system is busy.
Task-number: QTBUG-107153
Pick-to: 6.4 6.2
Change-Id: I82523080db40bddce9c9dc000433117d8ef74847
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
QWindow::requestActivate() is not supported.
This function failed in test vm in coin manually very often.
Task-number: QTBUG-107153
Pick-to: 6.4 6.2
Change-Id: I013651b0e5e7618c29742effd85a091ca95a7414
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
To allow the user to customize the C++ code that QDoc sees, so as to be
able to work-around some limitations on QDoc itself, QDoc defines two
symbols: Q_QDOC and Q_CLANG_QDOC, both of which are "true" during an
entire execution of QDoc.
At a certain point in time, QDoc allowed the user the choice between a
custom C++ parser and a Clang based one.
The Q_QDOC symbol would always be defined while the Q_CLANG_QDOC symbol
would be defined only when the Clang based parser was chosen.
In more recent times, QDoc always uses a Clang based parser, such that
both Q_CLANG_QDOC and Q_QDOC are always defined, making them equivalent.
To avoid using different symbols, and the possible confusion and
fragmentation that derives from it, all usages of Q_CLANG_QDOC are now
replaced by the equivalent usages of Q_QDOC.
Change-Id: I5810abb9ad1016a4c5bbea99acd03381b8514b3f
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
I wrongly assumed we can't query a value with an empty name ""
during the previous refactor commit, however, in Windows registry,
an empty name for a value means the default value of a key, we can
read and write it through the "Default" name.
Remove the wrong assert to fix the crash when we are trying to query
a default value of a key.
Add a new test case to test this kind of scenarios.
Amends commit 40523b68c1
Fixes: QTBUG-107794
Change-Id: Idacbcb86df4435a8c1ca1c19121599390ae8f3d3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The libraryMap only stored the file path, so we couldn't load two
versions of the same library as we'd find the other version already
loaded. Change the map to index by file name and version (using a NUL as
separator, since that can't appear in file names).
[ChangeLog][QtCore][QLibrary] Fixed a bug that caused QLibrary to be
unable to load two different versions of a library of a given name at the
same time. Note that this is often inadviseable and loading the second
library may cause a crash.
Pick-to: 6.4
Change-Id: I12a088d1ae424825abd3fffd171ce3bb0590978d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
According to the grafana dashboard it has not failed in the
past week.
Reverts ad736e9150
Pick-to: 6.4 6.2
Change-Id: I3eac3c7fd667cfe2cf951b2808dddbfed8eae087
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Regression introduced by commit 8d4eb292b2
in 6.0, when QTaggedPointer was introduced. We set the tag even when the
loading failed and failed to reset it because d = {} retains the tag.
Pick-to: 6.2 6.4
Fixes: QTBUG-103387
Change-Id: Ie4bb662dcb274440ab8bfffd170a07aa9c9ecfca
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
QLibrary intentionally does not unload on destruction, so failing tests
may leave libraries already loaded and cause further tests to fail
because of that. So add a cleanup() method to unload everything we may
have loaded.
Note that QLibrary::unload() sets its state to NotLoaded after one
successful call, so we must recreate the object in case it had been
load()ed multiple times.
Pick-to: 6.2 6.4
Change-Id: I12a088d1ae424825abd3fffd171d133c678f910a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The "qhash" test relied on the fact that those four elements would
produce a different order with a zero and a non-zero seed. But since
commit b057e32dc4 removed the setting of a
deterministic non-zero seed, this test had a 1 in 4! chance of failing.
Since 4! = 24, 128 retries should be more than enough to ensure we do
find at least hash seed that provokes a different order.
Fixes: QTBUG-107725
Change-Id: I3c79b7e08fa346988dfefffd171ee61b79ca5489
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
It makes it impossible to rerun it, bad for both CI and local test runs.
As a drive-by name the database file sqlite.db instead of foo.db
Pick-to: 6.2 6.4
Fixes: QTBUG-100245
Change-Id: I2e4ee01189ccbad2a6add5db7771d35fd7248da8
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Various places were knowingly provoking warnings without telling QTest
to check for and suppress those warnings. Some others did check for
this warning, so let's consistently suppress the noise.
Change-Id: I71b9829680c7a513f4d8fbb3c57442875a6c2dc4
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
For some reason the QTest::ignoreMessage() was conditioned on the type
being tested being Array; however, the warning is in fact produced for
all types. So anticipate it for all and make the test log less noisy.
Change-Id: I78681624252ff8a71f080204f8b031609ddac468
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There were two copies of the 0x1D157 row and we can't remember why.
So change one of them to the Chakma digit 3 (a spiral) and annote all
three test-cses with what meaning Unicode assigns to them.
Change-Id: I95837588bd5944f7f2c39c8438d9076e844e4dd0
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Two test-cases had the same name; distinguish them by the part of
their data in which they differ - one closes, the other doesn't.
Change-Id: I37051baf194bf8df742688739ad01e3335e64dc7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Two rows shared the same name. They claimed the value used was out of
range, but actually that was only true for one of them. The other was
in range, but the test reduced the number of digits allowed after the
decimal point, thereby making it invalid, so rename that one to
reflect this.
Change-Id: I0936ea25ec799c0069cd148b9f9bae5d35906093
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Include the spacings used, to avoid a naming collision.
Change-Id: Iaf78f7142f6780dcf4c7a0b973db9f625af06767
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Avoid duplication by distinguishing similar test-cases.
Change-Id: I1a100d6c9729f0ea356f177535d15c3d36e2da9e
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The test used to trigger a lot of QWARN messages; these are clearly
intended, so tell QTest to expect them, so that we get an error here
if those warnings ever don't show up.
Incidentally tidy up a comment and convert a != verify to a
QCOMPARE_NE(), since it's now available to do that job.
Change-Id: I83e225c37abe8446dac06ebe4e75258cb87b71b0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
In the process, clean up the building of the data tags: use a
range-for loop, albeit we do need an index to show in tags; show it
and the angle in the tags using addRow()'s easier formatting. Change
the low angle tests to show the sign of the angle (which is how they
differ)rather than just labeling them 1 and 2.
Change-Id: Ib5aaa3e22d771c530c9343ba368b0fdfceb264ce
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
The last three duplicated earlier ones; and their names didn't take
into account the circle that had been added to the path since those
tests. So revise their names to reflect that.
Change-Id: I32d74f21947b4ba0c04eee53daf8efde6b4a6409
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Two rows shared a data tag. Prefixed one of them with the color of the
half-transparent image it involves (the other's is fully transparent).
Change-Id: I1bd174008ed29bcf2f460e683fdf6d1f12ba19d0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The same data tags were used with two distinct filenames in their
data. Include the basename of each filename in the data tag, to avoid
duplication.
Change-Id: I216fecbd413fab409227ad6f93f8ac3fcc74b059
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The "a" and "A" rows appeared under Valid, then again under Only Keys.
The two copies were identical, in each case, so drop the latter.
Change-Id: Ib3d84710e772171bb4a5e0aefd20022810fb41cd
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
tst_QDBusType::isValidFixedType_data() called addFixedTypes() and then
addBasicTypes(); but the latter calls addFixedTypes(), too; so those
rows got duplicated. Only add the fixed types once.
Change-Id: If0d6f44ec7defb12117dad251878850ca75beb48
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The row 27 that was positioned before row 01, as if it were meant to
be numbered row 00, was identical to the row 27 that appeared after
row 26. Since row 26 was the other case dealing with the null
QRectF(), I kept the one after it instead of renumbering row 00 and
deleting row 27.
Change-Id: I3585839184233f1f1629280ac9e5b25110c155c0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use key(i) rather than valueToKey(value) as the Sha3_* alias Kekkak_*
or RealSha3_*. This way, we still test all members of the enum,
without duplicating row keys (albeit the aliases duplicate values).
Change-Id: I6acba5ffdf5b68294031d609a76b37ca8fad9d94
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Both countBits() and datastream() had two copies of an all-zeros test
with 35 zeros. Removed the second, in each case.
Change-Id: I5dec4765236ae870c30828dae0f04b8902a100f0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
/Zc:lambda seems buggy. Although in my experiments it works well
for 99% Qt repos, it seems some tests will trigger the bug and it
also blocks some new commits. So disable it for now, it's not stable
enough.
Now that this check is disabled, the workaround for tst_qstringapisymmetry
is also not needed anymore, so remove the workaround as well.
Partially reverts commit 8cb832090a
Change-Id: Icf0ecbbaa6262522470e5f5dea05705985ab18f1
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
setFocus() was called on a double spinbox without calling show()
first. That causes flakiness on XCB when checking focus afterwards.
The test can still fail, when focus is acquired by e.g. a system
popup.
This patch adds a show() call before setFocus() to stabilize normal
behavior. In case the double spin box is shown, but cannot acquire
focus, the test is skipped.
Fixes: QTBUG-70088
Change-Id: If02e88800a31b09a1da63dcc074eb8bb1b0df391
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The zlib convenience API we've been using so far has two problems:
- On Windows-64, where sizeof(long) == 4, the use of ulong for sizes
meant that we could not compress data compressable on other 64-bit
platforms (Unix). While zstream also uses ulong, being a stream API,
it allows feeding data in chunks. The total_in and total_out members
are only required for gzip compression and are otherwise just
informational. They're unsigned, so their overflow does not cause
UB. In summary, using zstream + deflate() allows us to compress more
than 4GiB of data even on Windows-64.
- On all platforms, we always allocated the output buffer in such a
way as to accommodate the pathological case of random, incompressible
data, so the output buffer was larger than the input. Using zstream
+ deflate(), we can start with a smaller buffer, then let zlib pick
up where it left off when it ran out of output buffer space, saving
memory in the common case that compression meaningfully reduces the
size. To avoid the first few rounds of reallocations, we continue to
use zlib's compressBound() for input less than 256KiB.
This completely fixes the compression side of QTBUG-106542 and
QTBUG-104972.
Pick-to: 6.4 6.3 6.2
Fixes: QTBUG-104972
Fixes: QTBUG-106542
Change-Id: Ia7e6c38403906b35462480fd611b482f05a5c59c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Add at least a few, so size() isn't completely untested.
Pick-to: 6.4 6.2 5.15
Change-Id: I500d28f7efb30ab578808d8fefb6ea57949edc2e
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
A violation of coding style (requiring braces on multi-line bodies
of conditionals) was accompanied by a mis-indented else block.
Fix a long line while I'm about it.
Change-Id: Ibe9cf15eadbe9ef58138d7876e5e2c5a14a92fd4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Pull out the arbitrary factor of three as a named constant and
document its arbitrariness once.
Pull out the mask and bit used in each function's loop to the outer
layer of the loop, since they don't depend on the inner loop variable
(or the random value generated in that loop).
Use QTest::addRow() instead of constructing a string to pass to
newRow().
Change-Id: Ifacbcb390e00828fd47f51b0c73d0ad5f6bc8bdb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The tests for indexOf() and lastIndexOf() had duplicate data row tags,
due to only using the needle and haystack, although some tests
differed only in start position. Include start position where needed.
Change-Id: I197d415265ab1a805f2d36fb88aec92ea8646f7a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Enclosing one string in each substring of another does not need to
repeat the empty substring of the latter. Extracting the empty
substring from different positions doesn't get different results.
In the process, tidy up the code a bit.
Change-Id: Ic66febbdadeaac0c466f4f1174d831a991d31e20
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
There were two copies of the same line in mid_data(), leading to
duplicated data row tags.
Change-Id: Ia21e855ff781b13fe18c932cff48cb0aabd12750
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The zlib convenience API we've been using so far has two problems:
- On Windows-64, where sizeof(long) == 4, the use of ulong for sizes
meant that we could not uncompress data compressed on other 64-bit
platforms (Unix). While zstream also uses ulong, being a stream API,
it allows feeding data in chunks. The total_in and total_out members
are only required for gzip compression and are otherwise just
informational. They're unsigned, so their overflow does not cause
UB. In summary, using zstream + inflate() allows us to decompress
more than 4GiB of data even on Windows-64.
- On all platforms, if the size hint in the header was too short, we'd
double the output buffer size and try again, from scratch. Using
zstream + inflate(), we still need to reallocate, but we can then
let zlib pick up where it left off when it ran out of output buffer
space. In all but the most pathological cases, copying the
already-decoded data instead of re-decoding it again should be
faster, esp. if QArrayData uses realloc() instead of malloc() +
free() to grow the buffer.
We also now directly allocate at least as much output buffer as we
have input, to cut the first few rounds of reallocations when the
expectedSize was created, as qCompress still does, using modulo
arithmetic mod 4GiB instead of saturation arithmethic.
Factor the growing of the output buffer into a wrapper function,
flate(), which can be reused when porting qCompress().
This completely fixes the uncompression side of QTBUG-106542 and
QTBUG-104972.
Pick-to: 6.4 6.3 6.2
Task-number: QTBUG-104972
Task-number: QTBUG-106542
Change-Id: I97f55ea322c24db1ac48b31c16855bc91708e7e2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The timestamp will no longer be incremented by 500ms after a mouse
release if the delay has been explicitly specified.
The default delay is 1 ms since f5010c49a3
but the running timestamp was unconditionally post-incremented by 500ms
after every mouse release, to prevent double-clicks, which were always
deemed as unintended (because we have a mouseDClick function for that).
Now, we do that 500ms increment only if the user has not provided a
delay value in the function argument at all. We have often found it
useful in our own tests to generate double-clicks "the hard way", by
sending indivdual events, so as to be able to check state in some target
object at each step, as shown in the new snippet.
[ChangeLog][QtTest] QTest::mouseRelease() and mouseClick() can now be
used to test double-clicks, by specifying a realistic timestamp delay.
Fixes: QTBUG-102441
Change-Id: I8e8d242061f79efb4c6e02638645e03661a9cd92
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Fix two tests which got broken due to the latest changes without
notifying because those tests are not run automatically.
Change-Id: Ibe9d9601f0a2ad4ce8f06ca21e7503e77fa55781
Reviewed-by: Fredrik Ålund <fredrik.alund@mimer.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is a combination of Q_UNREACHABLE() with a return statement.
ATM, the return statement is unconditionally included. If we notice
that some compilers warn about return after __builtin_unreachable(),
then we can map Q_UNREACHABLE_RETURN(...) to Q_UNREACHABLE() without
having to touch all the code that uses explicit Q_UNREACHABLE() +
return.
The fact that Boost has BOOST_UNREACHABLE_RETURN() indicates that
there are compilers that complain about a lack of return after
Q_UNREACHABLE (we know that MSVC, ICC, and GHS are among them), as
well as compilers that complained about a return being present
(Coverity). Take this opportunity to properly adapt to Coverity, by
leaving out the return statement on this compiler.
Apply the macro around the code base, using a clang-tidy transformer
rule:
const std::string unr = "unr", val = "val", ret = "ret";
auto makeUnreachableReturn = cat("Q_UNREACHABLE_RETURN(",
ifBound(val, cat(node(val)), cat("")),
")");
auto ignoringSwitchCases = [](auto stmt) {
return anyOf(stmt, switchCase(subStmt(stmt)));
};
makeRule(
stmt(ignoringSwitchCases(stmt(isExpandedFromMacro("Q_UNREACHABLE")).bind(unr)),
nextStmt(returnStmt(optionally(hasReturnValue(expr().bind(val)))).bind(ret))),
{changeTo(node(unr), cat(makeUnreachableReturn,
";")), // TODO: why is the ; lost w/o this?
changeTo(node(ret), cat(""))},
cat("use ", makeUnreachableReturn))
);
where nextStmt() is copied from some upstream clang-tidy check's
private implementation and subStmt() is a private matcher that gives
access to SwitchCase's SubStmt.
A.k.a. qt-use-unreachable-return.
There were some false positives, suppressed them with NOLINTNEXTLINE.
They're not really false positiives, it's just that Clang sees the
world in one way and if conditonal compilation (#if) differs for other
compilers, Clang doesn't know better. This is an artifact of matching
two consecutive statements.
I haven't figured out how to remove the empty line left by the
deletion of the return statement, if it, indeed, was on a separate
line, so post-processed the patch to remove all the lines matching
^\+ *$ from the diff:
git commit -am meep
git reset --hard HEAD^
git diff HEAD..HEAD@{1} | sed '/^\+ *$/d' | recountdiff - | patch -p1
[ChangeLog][QtCore][QtAssert] Added Q_UNREACHABLE_RETURN() macro.
Change-Id: I9782939f16091c964f25b7826e1c0dbd13a71305
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For the full list, please refer to [1].
Needed to change the qstringapisymmetry unit test:
In theory we don't need the array to be static and it did compile
without any problems so far, indeed. However, with this patch applied,
MSVC complains that the lambda function below can't access the array.
I don't understand why, because we use [&] in the lambda and it should
capture all the variables in theory, but in reality it failed to
capture this variable in the end. And making the variable static
solves this issue. Maybe it's a MSVC bug.
Already tested locally. Most Qt repos build without any issues,
only very few repos are not tested, as my local environment
can't build them.
[1] https://docs.microsoft.com/en-us/cpp/build/reference/zc-conformance?view=msvc-170
Change-Id: I658427aa171ee1ae26610d0c68640b2f50789f15
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
When deploying into some directory structure where CMAKE_INSTALL_LIBDIR
is different from Qt's lib dir, we need to set the RPATH of installed
plugins such that Qt libraries are found.
We do this using CMake's undocumented file(RPATH_SET) command and pray
that this command is safe to use across current and future CMake
versions. For CMake versions < 3.21, we use patchelf, which must be
installed on the host system.
The adjustment of rpaths can be turned on explicitly by setting
QT_DEPLOY_FORCE_ADJUST_RPATHS to ON.
The usage of patchelf can be forced by setting QT_DEPLOY_USE_PATCHELF to
ON regardless of the CMake version.
Change-Id: I62ced496b4c12bf6d46735d2af7ff35130148acb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Otherwise we don't properly test whether the deployed executable can run
without adjusting the environment.
We temporarily adjust the test_widgets_app_deployment test and set
CMAKE_INSTALL_LIBDIR to make the test pass. It would now fail on Linux
distros where CMAKE_INSTALL_LIBDIR defaults to "lib64" but Qt is built
with lib dir "lib". The next commit removes this hack.
Change-Id: I63c79ef1ee23ffaeed881337fde6e9d889ecc0fe
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Unix systems have got crash loggers in the past 15-20 years, notably
macOS and Linux (abrtd, systemd-coredumpd, etc.). By setting the core
dump limit to zero, those tools should be mostly inhibited from running
and thus not interfere with the parent process' timeouts. Even for
systems without core dump loggers, disabling the writing of a core dump
to the filesystem should also help.
Pick-to: 6.4
Change-Id: I12a088d1ae424825abd3fffd171d112d0671effe
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QWindow::requestActivate() is not supported.
We have one tst_selftests binary, and will test it with both xcb and
wayland qpa plugin. A runtime check and skip will have different
restult files, which is not implemented in testlib yet.
Task-number: QTBUG-107578
Pick-to: 6.4 6.2
Change-Id: Idc8cb24c6f42a9f0f4dc9493e3fd1a5803ba7ce0
Reviewed-by: Liang Qi <liang.qi@qt.io>
Allocate the QSplitter on the stack so that it and its child widgets are
cleaned up when the test function finishes.
As a drive-by, replace QString usage with QByteArray to avoid unneeded
conversion from and to latin1, and modernize list construction and for loop.
Pick-to: 6.4 6.2
Change-Id: I2e29961edbab1ec88be356fca6bc100f08894e82
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
In Qt 6, after changes such as 121fddcf5a,
we go through the QPA layer to close widget windows properly. Closing
and hiding of windows is now done in when we receive and handle the
window system's CloseEvent.
Such an event to a modally blocked window should be blocked, so that
users can't close a modally blocked window. However, if the event is the
result of a call to QWindow::close, then it should not be blocked.
Luckily, we know that the event is the result of such a call, so let
such events through. This restores compatibility with Qt 5, where it was
possible to first open a new dialog, and then close the previous dialog.
Add a test case.
Fixes: QTBUG-107188
Pick-to: 6.4 6.2
Change-Id: Id812c1fc36aa0e1a10dfb8d3a16a11d387289b05
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
We've been requiring C++17 since Qt 6.0, and our qAsConst use finally
starts to bother us (QTBUG-99313), so time to port away from it
now.
Since qAsConst has exactly the same semantics as std::as_const (down
to rvalue treatment, constexpr'ness and noexcept'ness), there's really
nothing more to it than a global search-and-replace, with manual
unstaging of the actual definition and documentation in dist/,
src/corelib/doc/ and src/corelib/global/.
Task-number: QTBUG-99313
Change-Id: I4c7114444a325ad4e62d0fcbfd347d2bbfb21541
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Just in case the same test is being run in parallel. We do that by
creating a listening TCP server in the test process. This test is
supposed to test the address reusability, so a clean close on a server
that never accepted a connection should not cause reusability issues.
Change-Id: I12a088d1ae424825abd3fffd171ccfb9fc5c09ee
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
To try to figure out why QProcess::waitForReadyRead is returning false
so quickly. Though we know it's going to be "Address in use".
FAIL : tst_QTcpServer::addressReusable(WithoutProxy) 'process.waitForReadyRead(5000)' returned FALSE. (Failed to listen: The bound address is already in use
Netid State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
tcp LISTEN 0 50 127.0.0.1:49199 0.0.0.0:* users:(("crashingServer",pid=40529,fd=4))
)
Pick-to: 6.4 6.2
Change-Id: Ic43a460bfc7c7eb6379405b7a1a064e502b6fef3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This corresponds to Unicode version 15.0.0.
Added the following scripts:
* Kawi
* Nag Mundari
Full support of these scripts requires harfbuzz version 5.2.0,
this version adds support for Unicode 15.0:
https://github.com/harfbuzz/harfbuzz/releases/tag/5.2.0
Fixes: QTBUG-106810
Change-Id: Ib06c526e49b0f01ef9f21123bcf875c6b19f2601
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There were two data8 rows; and no data9, so that was easy to fix.
Change-Id: I8191de142e1a3be57bf1ad97e63d5780f2859fea
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Two test cases were called "base 2, negative"; one of them use -1 as
value, so s/negative/minus 1/ for it.
Change-Id: Ia5da3952d93976262cc8423d4e75ec19dab9a088
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Using simply the pattern didn't work so well when some patters are
used repeatedly, on different haystacks. So include the haystack
in the tag name. Remove one straight up duplicate row.
Change-Id: Ib46364581f23c493e83d75e6d04ab09e4329a3a5
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
One "empty" test was base ten, the other left the code to work out the
base. Change the latter's name to reflect that difference.
Change-Id: I4918eb0d293420df315d86e532787950b8f05be8
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The addCommonCborData() helper had two identical rows named simple255.
It only needs one.
Change-Id: Ie934c31f373069788c3ef774fde8956b54814e67
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Two of the uuidA test cases had an open-brace for the string and no
close; one of them ended with a space (which, apparently, is valid).
Since the data-tag was constructed by formatting the string in a
fixed-width field, padding with spaces, these two cases coincided.
Fortunately the only uuidB test-case had closing as well as opening
braces, so we can just switch the test for "trailing space is not an
error" to use it, instead.
Change-Id: I7068d40145c6b6b3b72777b029282850b1d1ea81
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mate Barany <mate.barany@qt.io>
The first "test1 text" test-case related to a file called test1.txt;
but the second related to a file called test2.txt; I suspect a
copy-and-paste with incomplete post-edit. In any case, change the
latter's data tag to reflect the difference.
Change-Id: I8354a3d1bd18715d6717dfd0962aa70faefbee90
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test was using the same tags twice each, giving no clue to the
difference between the two test-cases for each.
Change-Id: I645b01c0c4008a766e505047cb05cc22640ee129
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
It's not clear why this test repeats each test-case five times, but
give the duplicates distinct names, at least.
Change-Id: I4a098d90c3fe6f61842745c1d5f62047fe13a9b5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There were simply two copies of the same row-adding code.
Change-Id: I12240dedf2649c314ad32984f4de9d6b9bf280d8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Two rows named "hex" were a collision we should avoid.
The two "showpos" rows could be better distinguished.
Change-Id: I43727041eb00e6883ce8b34b346de5e2a63f1a34
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Now I can read it and work out how to rename the duplicated data tag.
Change-Id: I78f2b3f38f955fa6e6a88cb87cfca6e4f755a177
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test-case for 0.0001 with precision 0 has the same expected text
as that for 0.0 with the same precision; which lead to QBA's test of
it getting a duplicated data tag. Add an optTitle for the one that
isn't precise to deduplicate.
Change-Id: I03600e2af43f6d11b53e05e8027924c92ed4db89
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
It first added a column, then some rows, then called
prependExtended_data(), which expects to be called first in a data
function and starts by adding the same column. So put that first and
drop the duplicate addition of the column.
Change-Id: Ia5cf86f821608e78f0e4872db2b3167ef81cc59e
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Having the same test tag for two rows of a data table makes the report
less useful. We also intend to forbid doing that.
Change-Id: I67ec32514b6550f4f97610a2140f1383d0d85b23
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The typeSignature for a type T[] is always "[" + typeSignature<t>, so we
can just implicitly support arrays of any known type. To prevent support
for multi-dimensional arrays, make sure that the underlying type is not
also an array.
By adding a QJniTypes::isArrayType in addition (that is true for any
type with a signature starting with '['), methods like
QJniObject::callMethod could then return a special QJniArray type that
provides array-specific functionality.
As a drive-by, and since all lines need to be touched to add braces,
replace std::is_same<>::value with std::is_same_v.
Change-Id: Iccadf03cfceb8544381a8f635bb54baeddf46c99
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
For some reason it has become extremely flaky.
Blacklist to unblock most patches.
Pick-to: 6.4 6.2
Task-number: QTBUG-107500
Change-Id: I11c3ff5e018981be46c20282fa171bce687596b2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
So we can gather statistics on whether it is still failing
Pick-to: 6.4 6.2
Change-Id: I1f4080f4d96f31ce2b689cda175af3a35563e232
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
None of these users require C++20 constexpr or C++23 noexcept, the
only remaining difference between std::exchange and qExchange.
This leaves a single qExchange() user, in QScopedValueRollback, that
requires the constexpr version, only available from C++20, and thus
remains unported.
Task-number: QTBUG-99313
Change-Id: Iea46f6ed61d6bd8a5b2fd9d9ec4d70c980b443a2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Skip tests that depend on programmatic window activation on platforms
where this is not supported, such as Wayland.
- Change tests that don't rely on the window being activated to use
qWaitForWindowExposed() instead.
Task-number: QTBUG-107153
Pick-to: 6.4 6.2
Change-Id: Ieb4280343a725a2cbdc46a8ac5c657beeb2e7e57
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
These escapes were documented but not used until the version 15.0.0
of Unicode.
Task-number: QTBUG-106810
Change-Id: If48dcd80acf32989e3f47676ca3d41848a325c0e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
focusProxyAndInputMethods tests focus acquisition and inheritance with
a toplevel widget, acting as a focus proxy for a child.
X11 window managers are set to be bypassed, programmatic focus is set
with QApplicationPrivate::setActiveWindow().
The test is flaky on Linux/XCB, and therefore blacklisted on most
Linuxes.
This patch removes focusProxyAndInputMethods, considering that
- focus proxying is tested in tst_QWidget::focusProxy()
- window activation and focus inheritance are tested in
tst_QWindow::isActive()
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: I510fd935399d9ad0b6cd76f1bd5db0811e0702f6
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When laying out a text and calculating maxWidth, we must _always_ take
into account the accumulated width of spaces (lbh.spaceData.textWidth)
regardless of wrapMode, other text content, spaces position, etc.
Fixes: QTBUG-106947
Change-Id: I2ac9af92ed7dd07c1e040bfcf83949a358d1c9c9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
After 1d961491d8, palettes are different
if they either have different brush data, or a different private. Two
privates can share data, but still must generate different cache keys.
The cacheKey has so far been composted of the serial number of the Data
struct, and a detach number that is incremented when we detach the
private.
This failed for two reasons:
- the implicit copy constructor of the Data class copied the serial
number, when it should have incremented it. Fix that by member-
initializing the serial number rather than doing it only in the default
constructor. The member initialization is also executed for the copy
constructor.
- the detach_no logic as it was implemented does not guarantee that two
copies of the same palette that share data, but have different resolve
masks (and thus different privates) have different detach_no values.
Use a static serial counter for that number as well.
Amend the test case to verfiy that cache keys, and the elements of the
cache keys, change when they are expected to.
Fixes: QTBUG-106984
Pick-to: 6.2 6.4
Change-Id: I84d7055ce8bfe0d42f1f8e9766f3f1ad610f4ec8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
In the presence of QT_CONFIG(opensslv30).
Fixes: QTBUG-107027
Change-Id: I481db3cdf3bbb1aa7127cc5498f0c0217df8c35b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This introduces a way to trace each entry in the glyph index
array to a specific index in the original text passed to
QTextLayout, as well as a convenience function to access
the original string from the QGlyphRun.
The index information is stored in the logClusters array internally
in Qt, but it contains the inverse information: For each
character in the output string, it contains an index into the
glyph array. In order to get the string indexes for each glyph,
which makes a lot more sense in the context of the QGlyphRun
API, we need to do a little search to construct the data.
To avoid adding unnecessary allocations, we make the new APIs
opt-in. If you do not specify anything, you will only get the
glyph indexes and glyph positions as before. However, you
can now specify exactly which parts of the layout to extract
using an optional flags parameter.
This also adds a manual test which can be very handy to
visualize QTextLayouts and how they are split into QGlyphRuns.
Fixes: QTBUG-103932
Change-Id: Ie4288fff338b9482aba0aba29fc7e1e59fa60900
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Given a QTaggedPointer, users may write
taggedPtr = {};
to mean "reset it". This is error-prone: due to overload resolution,
this actually ends up calling QTaggedPointer<T>::operator=(T *),
which changes the pointer but *not* the tag, and not the implicitly
declared QTaggedPointer<T>:operator=(const QTaggedPointer<T> &)
which would reset both pointer and tag.
Given the idiomatic usage of {} is indeed to perform a full reset (cf.
std::exchange(obj, {}), std::take, etc.), work around this by disabling
the operator= overload for pointers in case an initializer list is
passed. In other words, make `={}` fall back to the implicitly
declared overload.
Note, this breaks some usages, such as
taggedPtr = {rawPtr};
but at least we get a compile error for these, and they don't look
common at all.
[ChangeLog][QtCore][QTaggedPointer] The operator assignment
taking a raw pointer has been reimplemented in order to avoid
subtle issues when assigning `{}` to a QTaggedPointer. This will
cause code that assigns a braced-init-list to a QTaggedPointer object
to stop compiling (for instance, `tagPtr = {ptr}` is now ill-formed).
Change-Id: I5e572a9b0f119ddb2df17f1797934933dff2ba7b
Task-number: QTBUG-106070
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QDateTime] The 't' format character in a
toString() template can now be repeated to get alternatives to the
(unparseable) zone abbreviation. Thus 'tt' now gets the zone offset
without colon, [+-]hhmm; 'ttt' gets the same with colon, [+-]hh:mm,
and 'tttt' gets the zone name. Previously, each 't' was replaced by
another copy of the abbreviation.
Task-number: QTBUG-95966
Change-Id: Iccccd11f06fa732ed27c0e5d4e40a3d4b5f79f8d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QDateTime] The 't' format used in fromString() can
now be repeated to restrict parsing to particular forms. Thus 'tt' now
matches the [+-]hhmm offset format (no colon), 'ttt' the [+-]hh:mm
offset format (with colon), and 'tttt' matches an actual zone
name. When used singly, 't' still matches anything the parser knows
how to interpret as a zone specifier.
[ChangeLog][QtCore][QLocale] The 't' format in toDateTime() now has
repeated forms, as for QDateTime::fromString().
Task-number: QTBUG-95966
Change-Id: I73753145cb66a56bc25a5c2dd5cb051ba982fa2c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
