When the frame's vertical geometry changes because top/bottom
margins, border or padding changes we need to do a full relayout
of the frame to position it correctly.
Task-number: QTBUG-2975
Change-Id: Ia0f063cc2057b6d7a469977d258ec1608feff9bf
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Found this while debugging something else in Dr. Memory.
Change-Id: Id295ddf4e07088684ecf91e3c2e0a156bf6054cb
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
If the types doesn't match in QVariant::compare we do a comparison based
on QString, this may end up indicating a full match, though the we don't
match according to cmp. In this case it would be better if we preserved
the non-matching to avoid breaking ordering.
[ChangeLog][QtCore][QVariant] Fixed ordered comparison between QVariants
that do not match but produce identical toString output.
Task-number: QTBUG-40363
Change-Id: I84a8eca11e8875dba9948bde2906ae7c5aa35704
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
QClipboard sends QPlatformClipboard a zero pointer to
QMimeData when it's told to clear. So we need to check
for this to avoid a crash.
Change-Id: I570ed727029ca699673d7b2e989bdff44df8e161
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
-qtdoc repo uses "OS X" instead of "Mac OS X" and this caused
broken links.
-more comprehensive change still needs to be done but the new
name is used in the page to maintain consistency. At least within
the page or class.
Change-Id: I8a5650046fc0413cbb18359b743ecd30fd62e417
Task-number: QTBUG-40759
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Currently it is used by the Enginio module, but it
will be useful in other modules as well.
Change-Id: If8b458bfedb0da0d4b8c14484710c1a2ade502dc
Task-number: QTBUG-41254
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
QUnifiedTimer::elapsed() was implemented using
driverStartTime + time.elapsed() while the driver
was running, but time.elapsed already contains
driverStartTime so that was counted twice. This caused
repeating timers to fire immediately once they first
had fired, if the animation driver was started while
it was running.
Separate the two timers. Animation driver time restarts
from 0 every time it starts.
Change-Id: Icf5cd0381b121b2355d7c6ec3edd0997721cbcdf
Task-number: QTBUG-41198
Reviewed-by: Michael Brasser <michael.brasser@live.com>
A topic URL has changed in the Qt Creator documentation.
Change-Id: I3c6b5fbcb670d7a637a309b7a77a3da815a795ca
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
This reverts commit 20cf632ad5. The commit
produced to many problems during statics destruction. For example
causing QtCreator crash (QTBUG-40987).
Change-Id: Ib52f6a449c2d84deab2de792559a6a065ca45e8d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
A "sharing violation" happens when trying to delete the lock file and another
thread/process is reading it at that very moment. Detect the error and try again,
up to 10000 times - to avoid an infinite loop if QFile::remove fails for another
reason such as a sudden change of permissions preventing us from deleting our
own lock file.
On Unix the deletion can't fail because of readers, but it doesn't hurt
to check the return value there too, to catch other reasons for failures
such as a sudden permission change.
Task-number: QTBUG-38853
Change-Id: Icf12a74faed4a4916e3427abc09d9c33aa141476
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Many of them are already marked. Do it for the rest (QGLWidget et al).
Change-Id: I506d72ad20f8ef39981dbeee0df49229bcf748a7
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Refactor the code and move more things into the cross platform
code path.
Make sure the flags survive changing the locale of QCollator.
Use the correct locale on Windows, WinRT and OS X. We now
pass all QCollator autotests on these platforms.
Task-number: QTBUG-40778
Change-Id: Ic2d3334b5018c323a35a3ea8fc1d7ab5f99b4e62
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The old code was completely broken. It did dereference
val for user types, but val does in this case only contain
garbage. Instead use the pointer to the correct data.
Change-Id: I20ccf0bfa3dd3774c787d08c51cc8dd7b1ec9a1a
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
A well formed JSON document is not allowed to contain
trailing garbage at the end. Don't accept this in the
parser.
Task-number: QTBUG-40062
Change-Id: I0a09dbd099a8c643f58023342546c4e67d026fec
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The comparison operators between QJsonPrivate::String
and QJsonPrivate::Latin1String weren't all correct, leading
to wrong sorting of keys in QJsonObjects when the keys were
outside of the latin1 range and resulting lookup errors.
Task-number: QTBUG-41100
Change-Id: Idceff615f85d7ab874ad2a8e4a6c1ce8c2aa0f65
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
focusObjectInputMethodQuery() and sendInputMethodEvent() were not
thread safe. Remove them, and replace with thread safe versions
based on the same principle as queryFocusObjectThreadSafe().
Task-number: QTBUG-40995
Change-Id: Idb6f0c6d3963b7e8e73e029e83d0367088146ca8
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
It has no effect and inhibits move semantics.
After this change, two and five more copies are moves in QtGui
and QtWidgets, resp.
Keep the old form for compilers that mangle the return type.
Change-Id: I6257683144110230079fe9095303907ecc858c94
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unlike ordinary widgets, the ones that have OpenGL framebuffers must know
about screen changes because the device pixel ratio may be different on
the new screen. Add an internal event, ScreenChangeInternal, as the
counterpart to WindowChangeInternal.
Change-Id: I5e55999838e4c0284e7d9832299f7cc6b541ee3f
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
The language support detection in Cocoa does not report the correct
set of languages for all fonts. One consequence of this is that e.g.
Mkhedruli (Georgian) was not supported on Mac because the
'ka' language code was not reported for e.g. the Arial Unicode MS
font.
This was never detected in Qt 4, because the writing system support
we set for each font was never used for font matching, since we let
CoreText do the matching in Qt 4.
To remedy this, we also detect writing system support based on the OS/2
table in the font. We add this in addition to the current test in case
the language list has information about fonts with incomplete OS/2 tables,
to avoid regressing.
[ChangeLog][OS X] Fixed detection of writing system support in fonts for
some scripts such as Mkhedruli.
Change-Id: I26c2a42ef45112e17d6794d8798a57c8d8aaaafa
Task-number: QTBUG-41208
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Updating the geometry and available geometry in two steps means that
QScreen will be in an inconsistent state when emitting the geometry
change signal, as the available geometry has not been updated yet.
Piggy-backing changes to the availableGeometry based on the virtual
geometry changing does not make sense, so we now tie geometry and
availableGeometry (and their size variants) to their own separate
geometryChanged and availableGeometryChanged signals.
Change-Id: Iee0ced642cbb91c470cb54bc507d2c0512482c13
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
This follows the discussion at:
http://lists.qt-project.org/pipermail/development/2014-June/017225.html
Qt WebEngine will have a version of 1.0 when released with Qt 5.4.
The library name is currently libQt1WebEngine.so.1.0.0 but it should
rather be libQt5WebEngine.so.1.0.0 to represent Qt's major version
releases as a whole and not the major version of the module. This
prefix essentially expresses the module's dynamic linking
compatibility with other Qt modules.
This only makes sense if each major module release will be compatible
with a single Qt major version only.
All published modules currently already have 5 as their major version,
except qtenginio which doesn't use a Qt prefix, so this change has no
effect except for qtwebengine.
Task-number: QTBUG-30910
Change-Id: I894e7a367624c7fc263cf08104173a82eafd1439
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
With the recent changes in QDoc, we can no longer assume that
pages listed in the TOC are of type DocNode. For example, all
Qt modules want to list C++/QML type index pages in the TOC,
and those are now of type CollectionNode.
This change fixes the issue by using a more generic search
function when generating the .qhp TOC, one that doesn't
restrict the results to any specific node type. As an
exception, the main index page for a project must still be a
DocNode, i.e. a page declared using the \page command.
However, we do want to restrict the search to the pages in
this documentation module only - for that purpose, a function
for setting a local search order is introduced.
Task-number: QTBUG-40241
Change-Id: Ibaa5af9c5de6436f34b7ae67e56733817fc090b9
Reviewed-by: Martin Smith <martin.smith@digia.com>
If you configure QOpenGLWidget to use sampling, the 'resolvedFbo' isn't
updated during resizing. This leads to garbled views.
Change-Id: I9f9265520134bcf12436778773507df936c5fbb6
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
According to the XDND standard (http://www.newplanetsoftware.com/xdnd/)
if the proxy window exists then it should be checked for the XdndAware
property rather than the target window directly.
c3f9de6296 introduced the mistake.
In the old code the proxy window was used.
Change-Id: I83b66d4b1f08a1f44d5c1451d0f1735c084bcf09
Spotted-by: Alexander Smirnov
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
In both cases theme.rect calculated right after the
"sub & SC_ScrollBarSlider" test.
Change-Id: I9fa0c4e1327e68b4184674a13e7a4bf362f8deff
Reviewed-by: Adam Majer <adamm@zombino.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
If defined, the value of this variable is prepended to the built shared
library's SONAME identifier.
For more information, see: qmake/doc/src/qmake-manual.qdoc#qmake-soname-prefix
Task-number: QTBUG-31814
Change-Id: I4bceaf0c93162e4fad6bb424af1b82e74d38acdc
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
QOpenGLWindow already has some notes regarding this. It must be
mentioned in QOpenGLWidget too.
Change-Id: I0af90c9410a1c44cb9dd9ce58aa0371a58c57f65
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Make it clear that the class is usable regardless of the OpenGL version
the app is targeting. It may just do nothing.
Change-Id: I50e68a46e36ef1f4694016311af93c6f8719ce4f
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
To convert coordinates to a parent's coordinate system one should
translate them by an offset of a child widget relative to it's
parent widget. QRect::moveCenter() doesn't translate, it sets
the coordinates of the touch point's center to this offset.
Change-Id: I9d823784803bd1448c0d665944090674d3ff518b
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Otherwise the protos are not pulled in so the ANGLE-only build cannot
suceed (unless the flag is defined from somewhere else).
Task-number: QTBUG-41164
Change-Id: I959d154da88f7ccc8159ec7e810ffdba0e7f50ea
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
While GCC 4.4 has the required header, it is missing important
typedefs requiring use of pointers instead. This is acceptable if only
used in one or two places, but a quick search through the source code
lists quite a few usages of const_iterator typedef.
$ git grep -c initializer_list\<.\*\>::const_iterator
src/corelib/global/qflags.h:2
src/corelib/json/qjsonarray.h:1
src/corelib/json/qjsonobject.h:1
src/corelib/tools/qhash.h:2
src/corelib/tools/qmap.h:2
src/corelib/tools/qset.h:1
The lesser-evil is to bump Q_COMPILER_INITIALIZER_LISTS to version
GCC 4.5 and retain usage of required (by standard) initializer_list
typedefs.
Change-Id: I38d6fa0ef3dc7d958587b406d33e3e3a7378c026
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have no business defining types which come from another library.
These originally stem from the S60 port without further explanation
and Qt and its examples today compile without them, so remove them.
Change-Id: I683ea897c00ab3a1f7c809c45352fe590ae9a41f
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Use the new dedicated field instead of just assuming that the evaluation
timespan is buildtime + 30 days.
Change-Id: Ibf4078f030ea609d823fe01889a106a5da345817
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Iikka Eklund <iikka.eklund@digia.com>
It was decided not to port the handling of the saved
screen size to Qt 4.8, so, bump the major version to
ensure Qt 4.8 bails out.
Task-number: QTBUG-38858
Change-Id: Ia870519553172cd383830d9a722b0fada180ee1b
Reviewed-by: Alessandro Portale <alessandro.portale@digia.com>
Windows does not automatically move WS_EX_TOOLWINDOW type windows.
Task-number: QTBUG-39320
Change-Id: If9804f32beb534a27ba649abf5eaceb686af8f50
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This makes non-OpenSSL backends able to handle to certificate
extensions.
This also converts the Q_OS_WINRT #ifdef's in the unit test to
QT_NO_OPENSSL as the behavior is the same for any non-OpenSSL
backend.
Change-Id: I6a8306dc5c97a659ec96063d5a59cee2ee9a63a9
Reviewed-by: Richard J. Moore <rich@kde.org>
