Various patterns seem to have been copied, notably counting time from
QTime(0, 0) rather than using QTime::msecsSinceStartOfDay() and its
setter. Unsuitable value types also put in an appearance, and
QTime()'s parameters after the first two default to 0 anyway.
Corrected a lie in QTime()'s default constructor doc; it does not work
the same as QTime(0, 0) at all.
Change-Id: Icf1a10052a049e68fd0f665958f36dbe75ac46d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 300940a6c9.
The fixes for leaf modules landed already.
Task-number: QTBUG-74816
Change-Id: I1c7f0705c20d030419ceedca485106af73946b3c
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
This is done by adding a QWindowPrivate::allowsClickThrough() function,
so this could easily be adapted later on if desired for other
platforms.
Fixes: QTBUG-41126
Change-Id: I1157e5e7e7667ff11d1a5d21b3ce8c4b13202272
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
qVariantFromValue/qVariantSetValue() was marked as obsolete since Qt4.
Therefore mark them as deprecated with Qt5.14.
Since QVariant::setValue/fromValue() were using the now deprecated
functions move the implementation to them and let
qVariantFromValue/qVariantSetValue() call
QVariant::setValue/fromValue().
Fixes: QTBUG-74043
Change-Id: I46617cc4d5c1e8c162d0f1f7ae32e4cfe9ce915c
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reverts commit 7a64ffb773.
This change landed in 5.13 too early, so there is no baseline with both APIs in
dev. This will be reverted later when the fixes for leaf modules landed.
Task-number: QTBUG-74816
Change-Id: Ie5ee41fbf6be53b8fcb4289ac1ec3974e5bf6e42
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
After 'h2c' mode was implemented with the proper protocol
upgrade, the previously working 'direct connection' mode
was lost for clear text connections due to the erroneous
logic in the constructor: having !channel->ssl does not
necessary mean we started with HTTP/1.1 request, including
protocol upgrade header; it can also mean we connected a
plain socket and immediately sending h2 frames, without
any H2 negotiation at all.
Fixes: QTBUG-74765
Change-Id: Ice466d6bffb40048b7ab46fb064f2d3d795a12aa
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
TestMethods::invokeTest() has an outer loop on global data (albeit
with a comment that said otherwise). On its first cycle, we run the
test function's *_data() method, if it has one; there is an inner loop
on the rows this created. If the *_data() QSKIP()s, we need to skip
the whole test; otherwise, a QSKIP() in one sub-test should not lead
to skipping the remaining sub-tests.
Moved the check for *_data() QSKIP()ping to right after *_data()
returns, inside the "first global cycle" block that runs it.
Previously, this check was done before entering the loop on local data
rows, but outside that "first global cycle" block: consequently, later
global cycles would fall foul of this check (even though the *_data()
hasn't been run in this cycle, much less QSKIP()ped in it) if the last
sub-test of the previous global cycle had QSKIP()ped.
When running a single test for one specific data row, if the test's
*_data() QSKIP()ped, this misplaced check would also have lead to a
misleading "Unknown testdata" warning.
Changed testlib/selftests' tst_globaldata::skipSingle() to trigger the
bug (by having its last local row of first global row skip, which
caused the second global row to be omitted) to verify this is also
fixed; and amended one of its comments to reflect what's now to be
expected. Updated the test's expected output files.
Task-number: QTBUG-61774
Change-Id: I99596b595c6d1184038f23383844c6ff51a0cd91
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Removing connections and resizing the signal vector now
happens in a way that will not interfere with activate(),
as the old objects won't get deleted if we are somewhere
inside a signal emission.
This means that we don't need to lock the senders mutex
in activate anymore, as long as the reference counting
on the ConnectionData is atomic and we are in the senders
thread.
This implies that we now need to lock the receivers mutex in
queued_activate() abd blocking queued activation to ensure
it hasn't been deleted while we are emitting.
In addition, some precautions need to be taken to not read
from the receiver without holding the lock, as it could get
deleted while we're activating (if it's in a different thread).
To make that possible store the receivers thread id in the
connection data.
Use atomic pointers for all variables that can get modified
with the signalSlotLock() held and that are being read
without the lock being held.
This gives us a very nice additional speed improvement
for signal emissions.
without change with change
string based connect: 3287 2436
pointer based connect: 3941 3265
not connected: 403 400
disconnected: 460 489
5 slots connected: 9112 4515
Change-Id: Ib7324bb74c389dcc3b6581a03c31469a6e589fc2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
And use it to clean up the reimplementations in Qt DBus.
Change-Id: I8e3fe35e8db6405cbcbfb45b42a8f2efecc1cef0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Put all connections that get disconnected into a singly
linked orphaned list.
Whenever the refcount on the connectionData drops down to
one, this list can safely be cleared, even with the planned
removal of locking in activate().
Use an id integer in the connection to acoid activating newly
added connections.
Fixes: QTBUG-72649
Change-Id: Ide3d116ae7fc9ca497598c1c2b71d43b4339c92d
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The DNS entry for the host has changed, dig answers with dns.google,
not with google-public-dns-a.google.com. While developing a proper
fix to the test, blacklisting this particular lookup allows
integrations to pass in the meantime.
Change-Id: Id37da6b24554803bf4e2c84be5b949ded40566e8
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Avoid using inline assembler
Task-number: QTBUG-72716
Change-Id: I696efb5a787416eb4fc5ba3a250461aaa9a4afc2
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
Otherwise it can happen that we pick up the tool for the host system,
which will break compilation.
Users can still pass
-psql_config /path/to/pg_config
or
-mysql_config /path/to/mysql_config
manually.
[ChangeLog][QtSql] When cross-compiling pg_config, mysql_config
are not looked up in PATH anymore. Pass -psql_config path/to/pg_config
or -mysql_config path/to/mysql_config to explicitly enable PSQL or
MySQL in this setup.
Fixes: QTBUG-73565
Change-Id: I35ff32322bac69f1575ce6c846a56ac2ae3b8d55
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It is constantly passing according to grafana.
Change-Id: I4953cd54e27adde8dad79e9a0f025960802e6c7a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Fixed the other tests that used the methods, so that they now get the
data from QLocale instead; and added the missing feature #if-ery, as
these are textdate methods.
Change-Id: I896f356bdf88037db23590c71d0aeb0b8722bfa7
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
The code had min and max of an integral type and tested min + min / 2,
which naturally overflowed, provoking a compiler warning. The test
was meant to be testing min - min / 2; but min is even, so this is
just min / 2; and doubling that won't overflow (which is what the test
is about). As it happens, min + min / 2 is in fact max - max / 2,
which *would* be a good value to test, since max is odd. So add a
test for that and remove the broken test.
Change-Id: Iec34acbf0d5d7993d41ff844875dc10480b8eb1f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In particular, document the mis-behavior it takes for granted in one
test. Renamed some variables so that they're visually distinct from
one another and actually mean something intelligible. Renamed the
sub-tests to say what's actually happening. Reading the test output
now at least makes it possible to see what's wrong. I'll fix that in
a later commit.
Task-number: QTBUG-61774
Change-Id: I3e5f83b8baa3c6afbca9231b5bbc89d17f3e57e2
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Don't just wait for 300ms for the thread to finish, this can
lead to faling tests esp. on slow hardware.
Also fix a mem leak.
Change-Id: Ifa90da5507fc6d65ef77e368d7c238271623ff53
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Configure will print notes in the following situations:
- redundant options, e.g. -gui -gui
- contradictory options, e.g. -gui -no-gui
Fixes: QTBUG-53499
Change-Id: I6cf023e7730907069cf971f5982a41453f611c3c
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
It has been completely untested for a while and saw some breakage.
So let's add a selftest for it. ('-vs' when running tests)
Change-Id: Ibfb5ac0a2d741de7c3f519d91202d4977996045e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The Windows and Cocoa font engines ignored the stretch factor when
the pixel size is so large that QPainterPath rendering is used
instead of native.
Fixes: QTBUG-14315
Change-Id: I93390528ac264452b7d6af7d39f49f4b0dd56279
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Use move on the existing value as well so the constructor makes more
of a difference.
Change-Id: Iee2080da7b7d2d88eb108f0448c61423c7256979
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This benchmark was not compiled, and it only covered some parts of the
API. Enable it, and also measure the performance of PMF and Functor API
variants, for both QTimer::singleShot and QMetaObject::invokeMethod.
This uncovers that the zero-timeout optimization for the singleShot is
not applied to the PMF and Functor API variants:
********* Start testing of qtimer_vs_qmetaobject *********
Config: Using QtTest library 5.11.0, Qt 5.11.0 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 7.2.1 20171224)
PASS : qtimer_vs_qmetaobject::initTestCase()
PASS : qtimer_vs_qmetaobject::bench(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_slot":
5.20 msecs per iteration (total: 520, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_pmf":
75.93 msecs per iteration (total: 7,594, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor":
77.90 msecs per iteration (total: 7,790, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor_noctx":
76.23 msecs per iteration (total: 7,624, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_string":
4.99 msecs per iteration (total: 499, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_pmf":
5.37 msecs per iteration (total: 538, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_functor":
4.74 msecs per iteration (total: 474, iterations: 100)
PASS : qtimer_vs_qmetaobject::cleanupTestCase()
Totals: 9 passed, 0 failed, 0 skipped, 0 blacklisted, 50220ms
********* Finished testing of qtimer_vs_qmetaobject *********
Change-Id: I46336613188317124804638627f07eb135dc0286
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Under the 'Dark' theme as a system one, in an application forcing
'Aqua' (and thus 'Light') appearance, disclose button (drawn as
a triangle) can suddenly become transparent (apparently selecting
a 'Dark' codepath internally). Different ways to fix this (attaching
NSButton to a view, setting appearance on this button manually, etc.)
- all seems to have no effect. We resort to manually drawing this
button on macOS > 10.14 if 'effectiveAppearance' is 'Aqua'.
Change-Id: I6f54c0c4cf8fdd1ba53263ba9535e3055be46d42
Fixes: QTBUG-74515
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
It is documented for the use, but we were rarely using it.
Change-Id: I812b9e6c8fbf204aba43ce2b79eca308ca75de88
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We may get calls to the MessageTypes-overload of addMessage via e.g.
qSkip, or other functions in QTestLog, so we have to implement the
function.
Change-Id: I9d58c73e93ca918c42448c246c37cc9ae6aa04de
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Saves 234kB of read-only data (when compressed with zstd) in QtCore,
plus one load-time execution. With Zlib, the size was 315 kB.
[ChangeLog][QtCore][QMimeDatabase] Added configure option
-no-mimetype-database that tells Qt not to bundle its own copy of the
XDG MIME database. If this option is passed, QMimeDatabase will only
work if there's a system copy in $XDG_DATA_DIRS/mime. This option is
useful for Linux distributions that ensure the data is always present.
Change-Id: I1004b4b819774c4c9296fffd158e69c490e88fb6
Reviewed-by: David Faure <david.faure@kdab.com>
QDoubleSpinBox did not resize when setPrefix() was called because the
cached size hint was not reset.
Fix it by resetting the cached size hints and update the geometry the
same way it's done for QSpinBox::setPrefix().
Fixes: QTBUG-74520
Change-Id: I6f42a24ab0a4ce987ecbe1505a634d929474436b
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
In this threaded setup the server can sometimes have the data before it
calls "waitForReadyRead", what happens then is that we fail the wait and
as a result the test fails overall.
Let's check if we actually got some data after all and then continue if
we did. Since both the client and the server currently wait the same
amount of time (2s) the max timeout for the client was increased by
0.5s so it has some time to notice that the server got the message.
Change-Id: Ib5915958853413047aa5a7574712585bcae28f79
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
And export the required symbols in OpenSSL so we can run the test there
as well even if it's not needed for any functionality.
Change-Id: I4246d2b0bbdd42079d255f97f3c66ce8bb37390b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Doing endian-dependent selection of bytes of the value was a clumsy
surrogate for just accessing the intenal quint16 shifted suitably.
Change-Id: Icfd9d1d18f69eb94b041b8d32275df606c14c2b4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Prevent namespace collisions and make sure Qt functions
are grouped together.
Change-Id: I217188ee93e4300e273d10a79d6014179fc5a1ef
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
