It would crash if there is no screen at 0,0.
Change-Id: Ic84d75b3d8b917fe3696530cbe843e82923ba676
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The previous implementation leads to infinite chain of showing/hidden
line edit under circumstances described in QTBUG-54676. We basically got
the situation when size hint were calculated differently depending on
the line edit visibility state. In this case toolbar layout have to
show/hide extension button and line edit a lot of times and can never
leave this "loop" (please note, that the chain is much more complicated
in reality):
Resize toolbar -> Set layout geometry -> Size is OK to display line edit
-> Set layout geometry -> Hide extension button -> Set layout geometry
(wrong size is calculated here, so "run out of space") -> Hide line edit
-> Set layout geometry -> Show extension button -> Set layout geometry -
> Size is OK to display line edit ... And we're in the "loop"
Clear button is hidden if there is no text in a line edit.
In the previous implementation, the button was always visible, only
opacity was changing in order to "hide" the button. It resulted to
incorrect size hints (regular and minimum).
In the current implementation the button is really hidden/shown, and
size hints calculated correctly.
Also updated unit test for line edit.
Remove code duplication in functions for calculation text margin
Fixes: QTBUG-54676
Change-Id: I4549c9ea98e10b750ba855a07037f6392276358b
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Some tests were fixed and others were skipped/blacklisted.
Task-number: QTBUG-63152
Change-Id: Ica7df555f8d152ee589865911130525101d4b941
Reviewed-by: Liang Qi <liang.qi@qt.io>
This will be the only options for Qt 6, so make sure the code compiles now.
Change-Id: I23f791d1efcbd0bd33805bb4563d40460954db43
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This is necessary to provide details for the key too,
when the server is using DHE-RSA-AESxxx-SHAxxx.
Amends 7f77dc84fb.
Change-Id: I8ab15b6987c17c857f54bc368df3c6c1818f428c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
keyboardInputInterval() is 400ms by default which slows down the
testcase without a good reason.
Set it to 100ms which speeds up the testcase from 20s to 10s on my
system.
Change-Id: Ib883c5d3f09f8e896ae56a8fc8df2233be63de01
Reviewed-by: David Faure <david.faure@kdab.com>
Fixed a misguided condition in the check for bogus texts in the sscanf
branch of the decoder; it checked for 'e' but neglected 'E', which is
just as valid.
Change-Id: I9236c76faea000c92df641930e401bce445e06c8
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Revised some toFloat()s to be consistent with the matching
toDouble()s; previously, they would return infinity if toDouble() did
but return 0 if toDouble() got a finite value outside float's range.
That also applied to values that underflowed float's range, succeeding
and returning 0 as long as they were within double's range but failing
if toDouble() underflowed. Now float-underflow also fails. Amended
their documentation to reflect this more consistent reality.
Added some tests of out-of-range values, infinities and NaNs.
[ChangeLog][QtCore][toFloat] QString, QByteArray and QLocale returned
an infinity on double-overflow (since 5.7) but returned 0 on a finite
double outside float's range, while setting ok to false; this was at
odds with their documented behavior of returning 0 on any failure.
They also succeeded, returning zero, on underflow of float's range,
unless double underflowed, where they failed. Changed the handling of
values outside float's range to match that of values outside double's
range: fail, returning an infinity on overflow or zero on underflow.
The documentation now reflects the revised behavior, which matches
toDouble().
Change-Id: Ia168bcacf7def0df924840d45d8edc5f850449d6
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
They actually return infinity if conversion overflows, while still
setting ok to false; they were documented to return 0 on failure, with
no mention of this special handling of overflow. Documented reality
rather than changing the behavior. Gave underflow as an example of
failure other than overflow (toDouble()s do indeed fail on it).
Added some tests of out-of-range values, infinities and NaNs.
[ChangeLog][QtCore][toDouble] QString, QByteArray and QLocale return
an infinity on overflow (since 5.7), while setting ok to false; this
was at odds with their documented behavior of returning 0 on failure.
The documentation now reflects the actual behavior.
Fixes: QTBUG-71256
Change-Id: I8d7e80ba1f06091cf0f1480c341553381103703b
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
A couple of QLocale tests were using setlocale twice to provide a
transient locale tweak in tests; however, if the test in between
fails, that can leave the program running in the "transient" locale
after. So implement a proper class whose destructor ensures the
transient is tidied away. Also change the locale in use by one of
these transient changes: it purported to be checking things didn't
depend on locale, but was using the same local as most of the
test-cases for its test.
Change-Id: I0d954edcc96019a8c2eb12b7a7c568e8b87a41d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
QGraphicsProxyWidget::setWidget() is checking if the newly assigned
widget is already assigned to a child proxy widget without checking if
the child has a widget assigned at all which lead to a nullptr reference
if it is not the case.
Therefore check if the assigned widget is a valid pointer.
Fixes: QTBUG-15442
Change-Id: I006877f99895ca01975bdcad071cfcf90bea22ad
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Use 'msvc' instead of 'win32-msvc' or even 'win32-mscv*'.
Change-Id: I21dc7748a4019119066aea0a88a29a61827f9429
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test was taking so much time that it regularly timed out on WinRT
and when running in qemu. Reduce it from around 40 to 7 seconds on a
powerful desktop.
Now it either runs for two full seconds for each test function or until
it has done 50 iterations.
Fixes: QTBUG-71405
Change-Id: If752c1e65d3b19009b883f64edc96d020df479d1
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QFile::map() is documented to continue working after the QFile is
closed, so this should work for the resource file engine too.
Change-Id: I343f2beed55440a7ac0bfffd1563243a3966441f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We were returning a pointer to the compressed data and comparing to the
compressed data size.
Change-Id: I343f2beed55440a7ac0bfffd1563232d557c9427
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Instead of using a QString with only the prefix, let's do a full
comparison to make sure there's no junk at the end of the file.
Take the opportunity to remove the nonsense of a space at the end of
most of these files (I didn't remove from all).
Change-Id: I343f2beed55440a7ac0bfffd15632228c1bfe78f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Both use same source, but link without and with Qt Gui library.
Task-number: QTBUG-71751
Change-Id: I5643a07a8067f5fc10fc66f717f19bc3e16a33ab
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test has been failing over and over since it was removed from the
blacklist. Obviously it is not stable.
This is a partial revert of commit
b10ee45546.
Task-number: QTBUG-71773
Change-Id: Ie2588538ee704652c2f09ce6ad947da3011e7dad
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test needs to also unregister its timers when it fails. Therefore,
wrap the registering and unregistering in an RAII class.
Task-number: QTBUG-71773
Change-Id: I6ef44e580880deecb32763b5b0cd71e1c26929be
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Windows and WinRT only have on event dispatcher class so that failing
test cases in one test will most likely also happen in the other.
Change-Id: Ib047c6870e6e02f3cf8deaaa6e438ed0ac7e2d5a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
- Fix some clang nags (QFileInfo::exists(), raw string literals).
- Update the version numbers in the baseline to be 5.12 consistently
to make future modifications easier.
- Introduce another environment variable to redirect the diff
output to stderr. This can be used to generate a diff for applying
when making larger changes to uic.
Task-number: PYSIDE-797
Change-Id: I3f6716f0fe8e5939f6bef3965d90b2bb2c37f4c4
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Replace the generation of #ifdef's for the macros by QT_CONFIG
checks. Implement it using streamable classes to make it easier
to switch the output language later.
Task-number: PYSIDE-797
Change-Id: I28b5ed3ec80cd525a3df0cd54d9be4f09149cde4
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Including 4f7ad5ec44
to make appimage not ambiguous
Change-Id: I8db13fc785b267c09667ef38430bf98135c7f0d6
Reviewed-by: David Faure <david.faure@kdab.com>
We document being able to parse more than 8-bit per color, but were
ignoring everything after the first 8 bits.
Change-Id: Ic85ab04b0836e6979a623e294eebd5084c1a9478
Fixes: QTBUG-71373
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
On Linux, the printer panel impacts the application startup time,which
can be annoying when testing other dialogs.
Change-Id: Id13446047cf50765951a6bb5182ee50cae983457
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
QTBUG_7714_fullUpdateDiscardingOpacityUpdate2() would fail when
it moved to another screen if there is one to the left.
Change-Id: I3f8edc04c31dffc5a3bd005d9e5170dd68151df7
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
QTreeWidget::(is|set)Item(Selected|Hidden|Expanded)() are deprecated
for a long time but not marked as such. Therefore explicitly mark them
as deprecated so they can get removed with Qt6.
Change-Id: Ie4971350de61326811e0788df0d359ed3c442869
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QHeaderView::initializeSections() was calling updateHiddenSections()
with wrong parameters which lead to an inconsistency in the hidden
section handling.
updateHiddenSections() needs the first and last index which got removed.
Therefore we must pass the new section count for logicalFirst.
Fixes: QTBUG-55461
Change-Id: Ica06125cf19bdd500f55fd9cd59ace1795f3703f
Reviewed-by: David Faure <david.faure@kdab.com>
When calling setDocument (directly or through the constructor) a delayed
rehighlight is initiated. Previously, if any text was changed before
this rehighlight could run it would cancel the rehighlight, even if the
changed text only caused a new block of text to be highlighted.
Fixes: QTBUG-71307
Change-Id: Ib09b664d90906f5b4427105f0e45469806f3a779
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Since the comma character was originally used as a separator, we
need to extend QFont to have setFamilies() so that we can avoid
joining the family strings together. This enables us to see the
family name as a single string and for multiple family names,
we have families().
Subsequently, this has added functions to QTextCharFormat to
account for multiple font families too. So it is now possible to
set a single one directly with setFontFamily() and multiple ones
with setFontFamilies().
This also bumps up the datastream version to 19 as QFont now
streams the families list as well.
[ChangeLog][QtGui][QFont] Add setFamilies()/families() to aid using of font families with commas and quotes in their name.
[ChangeLog][Important Behavior Changes] QDataStream version bumped up to 19 to account for changes in the serialization of QFont.
Fixes: QTBUG-46322
Change-Id: Iee9f715e47544a7a705c7f36401aba216a7d42b0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
It's not actually exercised by anything in our source tree, but is
potentially useful and has been part of the documented public API for
some time. So mention that the caller is responsible for delete[]ing
its return and add a test that exercises it.
Task-number: QTPM-1385
Change-Id: Ifc5284b9eb1b678cf3c9708c681311e874838fc6
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The unit tests weren't running into this problem because the every
setDevice() was preceded by the object being initialized with the exact
same data, so there was never a previous error state. I've only changed
a couple of tests, left the other setDevice() unchanged so we test both
behaviors.
Fixes: QTBUG-71426
Change-Id: I1bd327aeaf73421a8ec5fffd1561a590e3933376
Reviewed-by: Nils Jeisecke <nils.jeisecke@saltation.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
By accident, when we erroneously tried testing TlsV1_3 on macOS with
SecureTransport (which does not support TLS 1.3) we hit this quite
subtle problem: it can happen that a server-side socket is never
created but a client (after TCP connection was established) fails
in TLS initialization and ... stops the loop preventing
SslServer::incomingConnection() from creating its socket. Then we
dereference nullptr.
Task-number: QTBUG-71638
Change-Id: I8dc5a4c53022a25aafe2c80a6931087517a48441
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Add an option that moves windows back to the top left corner,
which is useful when some window (of some application saving its
position) is lost after changing the monitor setup.
Change-Id: If358b1ed7f481f2bb98e375e88f11049f97a4a91
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
1. Remove the conditional inclusion of DTLS versions, they made difficult
and unnecessary ugly adding new protocols (something like TlsV1_2OrLater + 4).
2. OpenSSL 1.1.1 first introduced TLS 1.3 support. OpenSSL 1.1 back-end is
compatible with OpenSSL 1.1.1, but would fail to extract/report protocol
versions and set versions like 'TLS 1.3 only' or 'TLS 1.3 or better' on a
new context. Given 1.1.1 is deployed/adapted fast by different distros,
and 5.12 is LTS, we fix this issue by introducing QSsl::Tls1_3 and
QSsl::Tls1_3OrLater.
SecureTransport, WinRT and OpenSSL below 1.1.1 will report an error in case
the application requests this protocol (SecureTransport in future will
probably enable TLS 1.3).
Saying all that, TLS 1.3 support is experimental in QSslSocket.
Done-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Done-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Change-Id: I4a97cc789b62763763cf41c44157ef0a9fd6cbec
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This allows a user to efficiently watch for services with a common
domain prefix.
This is exposed in the API via a wildcard character in the service name.
For example creating a watcher on "org.mpris*" will match
"org.mpris.foo" "org.mpris.bar" and "org.mpris" itself. It will not
match org.mprisasdf.
Internally the argument match rules have been expanded from a single
QStringList to a struct containing args and arg0namespace. This was done
so that we can easily use argpath in match rules in the future.
Change-Id: I55882ab603cc6ba478e8c0ea9a6800f6e483a50c
Reviewed-by: Kai Uwe Broulik <kde@privat.broulik.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure <david.faure@kdab.com>
This avoids memory allocation and data copying in e.g.
QObject::property().
Detected by heaptrack's "Temporary allocations" counter in an
application using the breeze widget style (many animations).
Change-Id: Iabdb58a3e504cb121cce906ef707b0722de89df6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implemented a new proxy model to transpose the source model.
Rows will become columns and vice-versa.
Both flat and tree models supported.
[ChangeLog][QtCore] New class QTransposeProxyModel to
swap rows and columns of the source model.
Change-Id: I902963c6b81aa0f63b5ad2bddca538f28b565084
Reviewed-by: David Faure <david.faure@kdab.com>
Replace BackgroundColorRole/TextColorRole with
BackgroundRole/ForegroundRole and explicit deprecate them for 5.13
Change-Id: I6b0d99844a32d2f5fdfd1878317a7b7422b800d3
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Replace all occurrences of QApplication::set/resetOverrideCursor with
the QGuiApplication::set/resetOverrideCursor since it's a static
function of QGuiApplication.
Change-Id: Ic898ab50a7ad4ed2bc9c6acb26cf4a979c2f82af
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The tests would rely on the window manager giving it focus a bit too much.
Change-Id: I1b28def2c95a4f0a9665a7cf6e0c14db03df98d5
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This only updates data on languages already present in 5.12; once it
has merged up to dev, the scripts need to be run again to pick up a
few more languages and possibly add any more new languages present in
v34. Change some tests to match changes in en_AU's abbreviated day
and month names.
[ChangeLog][ThirdParty][CLDR] Update locale data to CLDR v34.
Task-number: QTBUG-71144
Change-Id: I68402b5e7e9d3dba669b8ba31b9a8abd86675c6e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
tst_QSqlQuery::bindBool() did not check if the bool is correctly bound
as part of the WHERE statement. Add a new test to query for the bool
column and check if there is exactly one row returned.
Fixes: QTBUG-38891
Change-Id: I0bd1ceb1b30e50f67f44f5b06d68683195b78b29
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
When QMimeProvider parses the shared mime database xml files,
it will read the <comment> element for mime comment and treat the
`xml:lang` attribute as locale language string. When no `xml:lang`
attr is provided, QMimeProvider will read the value and treat it as
a en_US locale string as the default key.
When we call QMimeType::comment(), it will try to get the locale
comment string with the default language (QLocale().name()), once
it can't find a matched result, it should return the default key
(which QMimeProvider set it as en_US locale before) as fallback.
Task-number: QTBUG-71314
Change-Id: I444f8159d6f19dfef6338cd79312f608d8f13394
Reviewed-by: David Faure <david.faure@kdab.com>
QTableWidget::isItemSelected/setItemSelected() are deprecated for a
long time but not marked as such. Therefore explicitly mark them as
deprecated so they can get removed with Qt6.
Change-Id: I77fffe2786751306115c3f5da0ef98ff84e35b1a
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QTreeView/TableView::sortByColumn(int) was deprecated a long time ago
but never got removed. Therefore mark it with QT_DEPRECATED_SINCE(5, 13)
so we can remove it with Qt6.
Also sync the handling of the sort order changes in QTableView with the
one from QTreeView.
Change-Id: I0371d9a9c21116edaa9125835827f1a200075d36
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QTreeView only had functions to either expand all items or until a given
depth. What was missing is to expand all subitems for an index
programmatically which is added with this patch.
[ChangeLog][QtWidgets][QTreeView] Added expandRecursively() to expand
all items below a given index
Fixes: QTBUG-10482
Change-Id: I8fc4d50b0b7e90245840c99a0188f13c0670253a
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Follow the pattern of char and float, and treat shorts as a more generic
type in QVariant::canConvert()
Task-number: QTBUG-60914
Change-Id: Ib1cc7941ee47cb0fc0098f22f98a03cd6f6b63fe
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In the process, corrected an inaccurate XFAIL message (an XPASS is
normally an error, unless blacklisting ignores it so turns it into a
BPASS). Added the missing .tap file to its expected output.
Documented the similarity to the silent/ selftest.
Task-number: QTPM-1385
Change-Id: Id74a1353d54af2f3bfe2c764e33c1f051958ab21
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The testlib selftest sets various things in the environment for
crashing tests; the generator for its expected output should set the
same things, as they affect what output is produced.
Change-Id: Iec2ed59982ea1043582573530c33619d8e8ed08e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
If the two lines have identical texts, the comparison returns true.
So don't complicate various other conditions on the way there with
filtering out that case; deal with it first so they don't need to.
Change-Id: Iebd230704ce5f53d12d5afa64aab30f83bb9d407
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Added operator[] to QCborValueRef and mutating operator[] both there
and in QCborValue. If the value (referenced) is not a container, it
is replaced with a map and a reference into the result is returned.
If the value is an array and the key is a string, negative, or more
than 0xffff, the array is first converted to a map.
Change-Id: Ibbc9e480fb25eb3d05547c8a1b99e762b2a68b68
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The bitmap cache for the first 64 signals being connected was only set when the
connection is added. It was never unset when the connection was removed.
Internal use of the connectedSignals bitmap is not hurt by it occasionally
saying a signal is connected even though it is not, since the purpose of those
checks is avoiding expensive operations that are not necessary if nothing is
connected to the signal.
However, the public API using this cache meant that it also never spotted
signals being disconnected. This was not documented. Fix the behavior by only
using the cache if it is up to date. If it is not, use a slower path that gives
the correct answer.
To avoid making disconnections and QObject destructions slower, the cache is
only updated to unset disconnected signals when new signal connections are
added. No extra work is done in the common case where signals are only
removed in the end of the QObject's lifetime.
Fixes: QTBUG-32340
Change-Id: Ieb6e498060157153cec60d9c8f1c33056993fda1
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Spaceship operator was disabled for QCborValue, but not the test.
Change-Id: Icb91da689f62ef6de9f4fa926346505c5e50e9eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
PCRE2 does not support JIT on winrt. This test row takes a long time
(30 seconds here) without JIT and thus might cause test timeouts in
COIN when run on winrt.
Change-Id: I79d9f6be16dbe16594ae2bf51f353acd06b3d2fe
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This way there is only one for loop, which is more optimizer friendly
Change-Id: Iaa02026627d5259c3eea1ff5664e8f22664eef73
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since Qt 5.10, qTo/FromBig/LittleEndian<float/double> stopped working.
It may be confusing, but big endian floats do exist, so not to break old
code, we should support them.
Change-Id: I21cdbc7f48ec030ce3d82f1cd1aad212f0fe5dd0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the test is stable in Qt 5.12.
Task-number: QTBUG-60993
Change-Id: I0c366567121688d9518e90b5e8f9ec1b4006b7b9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
on macOS, the test seems to be stable nowadays.
Task-number: QTBUG-39986
Change-Id: I18430c3feb27a5bee5474e1eb95f7d89b25f00a9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
on macOS, where it was skipped but where it now seems to be stable/work.
Task-number: QTBUG-39983
Change-Id: I100a57f23b43074ebacc012be247d92acc6ae336
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Calling rowCount inside another auto test function yields unexpected
results, if rowCount fails. Without a check for QTest::currentTestFailed
the failure will not stop the calling function and other functions like
rowsInserted and rowsRemoved might happily continue even though their
requirements are not met. That caused a crash on winrt under certain
circumstances.
In addition to that TRY_WAIT now does not only wait for the given
amount of time, but also gives feedback about its result. Before
this change TRY_WAIT was basically useless, as it gave no indication
about its success/failure.
Fixes: QTBUG-71121
Change-Id: Ibd3f233a0b913db799814be97c4274d510643c74
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Before reading the configuration of a docker machine, the machine shall
be created and started. Otherwise, the docker command will complain
about "cannot connect to the Docker daemon".
If the docker machine has not been created, the make check will be
immediately terminated, and then print the error message. If its status
is not running, the machine will be turned on by a start command.
Change-Id: I7f4c322e7bdf29e4e4203e0e1bbc2e5c8cf677be
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The state was forgotten from the translation layer, this is important for tree views.
Fixes: QTBUG-71223
Change-Id: Ief4004fe455889f9d5a7eb018bf34d37c36a6bd9
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
POSIX specifies that tzset() consults environment variable TZ and
modifies some globals; it also specifies mktime(), localtime() and
strftime() to behave as if they called tzset(). Fortunately, we only
call strftime() from a test and only call localtime() when not
threaded. Provide wrappers for tzset() and mktime() that share the
lock used by our environment-access code, to prevent races on the
environment (and tzset()'s globals) when we call them.
In the process, re-use tst_QDateTime's TimeZoneRollback in its older
test systemTimeZoneChange() and presume that this can now be tested
cross-platform, since TimeZoneRollback is used in another test where
this works.
Fixes: QTBUG-71030
Change-Id: I79f559b8857ea2803e73501008bf0d7158c6731f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTableWidget::takeItem() emitted cellChanged with row and column set to
-1. The internal functions searched for item after it was reset to
nullptr and therefore it was not found.
Since the modified cell is known because it's passed to the takeItem
function, the correct row/column can be retrieved from there.
Task-number: QTBUG-70478
Change-Id: I5ff5991c49f3200efe95fde4c7d0d28e19be7ebf
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This test works for me with KWin and is blacklisted on most linux platforms.
Let's try to remove the blacklisting next.
Using qWait right in front of the QTRY_VERIFY does not add any value.
Task-number: QTBUG-26424
Change-Id: I2dcd5fb3f3cbb64e190c777231b791d1ad9dd704
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
There is no docker bridge on macOS. Docker document recommends using
port mapping to connect to a container; but it causes a port conflict
if the user is running a service that binds the same port on the host.
An alternative solution is to deploy the docker environment into
VirtualBox and use the host network option.
Task-number: QTQAINFRA-2293
Change-Id: I05dc65c5f8b4be7a1b1874a4ec7c034cc68679ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The internal and external keywords in the server configuration are used
to specify the network interface (IP address) that the Dante server
should bind to. Because docker-compose allows a container to join more
than one network (by adding multiple entries under the top level
networks key to a docker-compose file), the default server
configuration (danted.conf) shall be updated in accordance with the
settings in the docker-compose file.
The user can pass the setting of a docker-compose file to containers by
adding environment variables in the docker-compose file. After the
container gets created, the danted.sh script uses the input environment
variables to overwrite the default value of internal and external
interfaces before starting the Dante server.
environment:
- danted_internal=eth1
- danted_external=eth1
- danted_auth_internal=eth1
- danted_auth_external=eth1
Change-Id: I7c65cdd136ba5dac387bee5e22e1f4335e960101
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The hue parameter in hsl/hsv was treated the same way as a the other
parameters although it's range is from 0-359 and not from 0-255.
Fix it by extending the maximum range for the first parameter when
parsing a color value given in hsv or hsl.
[ChangeLog][QtGui][CSS] Fix the range of the hue parameter when parsing
a color given in hsl or hsv
Fixes: QTBUG-70897
Change-Id: I9ffa65a89c0abcca62bae35777ca1cbde3375180
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The Qt stylesheets color property did not support hsl or hsla although
CSS 2.1 does support it. Since QColor natively supports this color model
only the color parsing needed to be adjusted.
This also adds some stricter checks for a valid css color definition and
prints a warning about the issue.
[ChangeLog][QtGui][CSS] Added support for hsl/hsla colors
Fixes: QTBUG-58804
Change-Id: Ief65a36a7e0ed0d705dc1fe5a8658e8d07fe9a13
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Only QGuiApplication would emit the signal. Untangling the duplicate
code is rather non-trivial, so left alone for now.
Fixes: QTBUG-71186
Change-Id: I4021e3b9ff39718562f4fa3a03c092436b559e9a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This test triggered a compiler warning for good reason, it made no
sense, trying to change it to what it was probably meant to be.
Change-Id: I01a848272b42dae2aaa58a4f5bed998644d864da
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Some of the enums were cast to int on comparison. That just makes it
harder to know what the values were.
And verifyClientCertificate had 4 cases which were named the same as 4
others.
Change-Id: I09e8e346a6f416236a92073cf9a8f349938d37ef
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Before commit 4d15f393a7 update requests
were handled by a timer on QWindow. Therefore they survived the closing
and re-opening of platform windows. Now, as the timer was moved to
QPlatformWindow, it gets reset when you close the QWindow, and any
pending update requests are lost. However, we do set the
updateRequestPending variable on QWindow when requesting an update.
Therefore, we can also restore the update timer on the platform window
when creating it.
Change-Id: I23b00f24a46706beac7d1455edd8a5623db46b22
Fixes: QTBUG-70957
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Reviewed-by: Thomas Hartmann <thomas.hartmann@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
In some cases, a tool tip may be shown outside screen geometry, i.e. if:
- QToolTip::showText is invoked manually with a position outside.
- In tst_QToolTip::setPalette if there is no screen at (0, 0). This might
happen in a multi-monitor setups where one screen is taller than the other.
- On Wayland windows are (by design) not allowed to know their position on
the screen. This means that global positions can't be trusted.
This started crashing when QDesktopWidget::screenGeometry(pos) was replaced
with QGuiApplication::screenAt(pos)->geometry() because screenAt will return
null if no screen is found, while screenGeometry defaulted to the primary
screen.
This reverts to the old behavior of falling back to the primary screen.
This won't solve the issue completely for the Wayland case, but at least we
will stop crashing.
Change-Id: I42dd07cc21c2f9f0ea0d69f0c25bd46d8a2615a0
Reviewed-by: Filipe Azevedo <filipe.azevedo@kdab.com>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QImage's operator>>(QDataStream&) did not set an error mode on the
stream on read failures. That would break QDataStream transactions.
Since the current QImage serialization cannot differentiate between
truncated and corrupted data, we set the ReadPastEnd error as expected
by the transaction system.
Also specify the expected file format on decoding QImage from stream,
to avoid all the format handlers' canRead() being invoked. This is
necessary since some of them may call ungetChar(), which fails when
the stream is in a transaction.
Also add testing of this feature to the QDataStram transaction
autotest. That required a slight rewrite of the fake sequential
QIODevice subclass. The previous implementation had incorrect
behavior of peek(), which is required by QImage decoders.
Task-number: QTBUG-70875
Change-Id: If3f1ca7186ad1e6ca0e6e8ea81d2b2fbece6ea01
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Wrong option was used to set zlib compression level for png
setCompression with negative value uses default compression
setCompression with value between 0-100 converts to zlib compression level 0-9
setCompression with positive value overrides Quality option
Change-Id: Ic4b048a1e30d6940019c2a00a6c24d0c11e3f821
Reviewed-by: Alexandra Cherdantseva <neluhus.vagus@gmail.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When there were additional spaces between the function definition and
the first parameter, the parser failed to parse it when it contained
another function (e.g. 'qlineargradient(... rgb() ...)').
The reason for this was that ::until() needs the function at index-1 so
it can correctly count the opening parenthesis.
Fixes: QTBUG-61795
Change-Id: I992f556e7f8cd45550f83bc90aa8de2b4e905574
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The flakiness was reported for macOS 10.8 a long time ago and I
am not able to reproduce it, so lets remove the workaround for
it.
Task-number: QTBUG-32690
Change-Id: I92e64065c7480b8f4c5d1d1e6cb5fdd218a70313
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use a template on the size of the char[], as suggested by Ville
Voutilainen. This resolves ambiguity about whether such look-ups
should be done via QString or QCborValue (not that it would have made
any difference).
When we come to add mutating indexing of QCborValue, chained
dereferences like map[i][j][k] need to stay in operator[] const
throughout, to avoid detaching intermediates to create references into
them due to using the mutating operator[] on the earlier dereference's
return. So const-qualify the QCborValue operator[] const variants at
the same time, to match those of QCborValue itself.
Change-Id: Ib1652ae9440fe3767a653afa2856b74040210e07
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch adds the missing overload for QRegularExpression to match the
QRegExp one for QPlainTextEdit.
[ChangeLog][QtWidgets][QPlainTextEdit] Added QRegularExpression find()
method overload.
Change-Id: Id156971d3fa0372712bfa8b72a55550942a767e0
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
This patch adds the missing overload for QRegularExpression to match the
QRegExp one for QTextEdit.
[ChangeLog][QtWidgets][QTextEdit] Added QRegularExpression find() method
overload.
Change-Id: Ic7be224dcc59fc8d832daddd1999a713b7f04253
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
Theoretically, it could improve the speed. Some of the modified lines
also make the style homogeneous.
Change-Id: Iaed7b16fa75e485be0f825220c366903525448ce
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make the code consistent with the DomProperty::write() method.
Task-number: QTBUG-70613
Change-Id: I622b4a019a4473823584de97304f8324f2cf0c6b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
52f1692b84 introduced a possible fix for
this flaky test. Therefore unblacklist them to see if the change really
fixed the issue.
Task-number: QTBUG-64639
Change-Id: I759d66aac7641505487e88254d16750e87c97350
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QTable/QTreeView did not follow the documentation and returned
their needed size with scrollbars within viewportSizeHint().
Then sizeHint() also took the size of the scrollbars into account
when the policy was set to ScrollBarAlwaysOn.
This lead to different results when the widget was shown/hidden and/or
the scrollbar was visible or not.
Fix it by only adding the additional size when the scrollbars are
really visible. Also use header->isHidden() instead of isVisible() in
QTreeView the same way it is done in QTableView.
[ChangeLog][QtWidgets][QAbstractScrollArea] QTableView/QTreeView are
now reporting their viewportSizeHint() correctly taking into account
its scroll bars visibility and visibilityPolicy.
Task-number: QTBUG-69120
Change-Id: If50959a9f7429275e3e33122644c978fb64972ba
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Perform a @Nx image file lookup when loading pixmaps.
Make drawBackgroundImage() handle high-dpi pixmaps,
here the layout calculations needs to be in device-
independent pixels
Fixes: QTBUG-36825
Change-Id: I61e6f53c59f61f3bd88c34a036349e51e8c8ad92
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Usually we focus in when we receive a click or equivalent.
QGraphicsScene by default also transfers the focus when you start a
touch on a trackpad or similar. Most of the time this also generates a
synthetic mouse click, so people don't necessary notice. However, at
least on macOS you can configure this behavior. With focusOnTouch
switched off, QGraphicsScene behaves as one would expect on macOS.
Fixes: QTBUG-59442
Change-Id: Ib87112640eef6b77892ad2490d80eedd055e6dce
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This patch enabled json1 support for sqlite3 by defining
SQLITE_ENABLE_JSON1
[ChangeLog][QtSql][SQLite] Enable the json1-extension for
the SQLite3 plugin
Task-number: QTBUG-63498
Change-Id: Iaf1069ff1396c573125a5a3f490c0df5df560468
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The matatype should not keep manually maintained list of stream
operators. The patch adds automatic detection for all builtin types
so load and save functions pick the right delegate automatically.
This change exposed some existing anomalies:
- char is enforced to be signed while it seems that just calling
the operator directly does not have that feature.
- [unsigned] long type is always upgraded to [unsigned] long long
- QCborSimpleType doesn't have the data stream operators while
metatype is able to stream it through casting
Change-Id: I51178d6acd97d0585a6089e30ddd6acb2a29af54
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Ife72db5a0d7cb8abe55c60c519087e2b60f26990
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This is a regression from commit 346c15102b, which creates a new QRegExp
in setFilterRegExp, losing previously set case sensitivity property
(i.e. when the code does proxy->setFilterCaseSensitivity(Qt::CaseInsensitive)
before setFilterRegExp).
Interestingly that commit ensured that setFilterFixedString would still
preserve CaseSensitivity, but not setFilterRegExp(QString).
Change-Id: I3d37d001ce6e86dd90e7e07431440a42607172f9
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
When a time-zone does a spring-forward, skipping an hour (either to
start DST or to move its standard time), there's an hour that doesn't
exist on the day in question. That hour can be the first hour of the
day, in which case using 0:0 as the default time is broken. So catch
this case and use the first time that day that makes sense.
Fixes: QTBUG-70823
Change-Id: I23dae9320a3cdd2c988841a7db1b111edb945730
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Moc shouldn't artificially introduce calls to possibly overloaded
operator&. It can cause odd side effects in a user code.
Change-Id: Iaa1b491fe6a1a5ebd4dfa1172359dc792cc7604f
Fixes: QTBUG-68191
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is not reason why it should be kept in secret. Not having public
accessor forces a user code to keep a copy of the id. Visible for
example in QML (QQmlValueType).
Change-Id: If0de65fb8d91bcd50880c66b5f87c68f6d888dd3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move the creation of the symbolic link/junction from the _data() slot
into the actual test function. The parameters are passed by a newly
introduced struct. This ensures only the symbolic links/junctions that
are actually needed are created. It can then no longer happen that
filtering for one data row invokes recursive deletion of the mountpoint
junction.
Also use of the newly introduced convenience createSymbolicLink()
in canonicalFilePath()
Task-number: QTBUG-63989
Change-Id: Ia78fd4ad6097136934ab5a375f4c352713d0f115
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Using std::vector saves a bit c++ code when using range-for loop over
the vector.
Besides, no shared copies created anymore which is a bit faster.
Change-Id: I564306ed9ac907e9f32f59b33ed15c027a59b4eb
Reviewed-by: David Faure <david.faure@kdab.com>
QUrl::RemoveAuthority is RemoveUserInfo | RemovePort | 0x10, so the
condition
if (options & QUrl::RemoveAuthority)
would match if any of the other bits for the username, password or port
were set, which meant we would skip the host comparison. Ditto for
username and RemovePassword.
[ChangeLog][QtCore][QUrl] Fixed a bug that caused QUrl::matches to
incorrectly compare two URLs with different hostnames or different
usernames as equal, if certain QUrl::RemoveXxx options were passed.
Change-Id: I015970a03b874898bba7fffd155856ab9d6cb1be
Fixes: QTBUG-70774
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Before this change we inserted newline only if an option has a
description and ended up with an arbitrary long line with all options.
[ChangeLog][QtCore][QCommandLineParser] Fixed a bug that caused the help
output to show two options or more in the same line if the options didn't
have a description.
Task-number: QTBUG-70174
Change-Id: Id54b9ae13ee596869e4dc14e09301aea19eed2f8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise, the rects will pile up when the item is not part of a view.
Task-number: QTBUG-54275
Change-Id: I29c989e25ce0ca1ac0b87d0388a476ef1acd9cfd
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Add properties enabled_features and disabled_features the respective
library targets.
This makes it possible to query the enabled classes in dependent libraries
(for example, Qt for Python).
Add a test verifying whether the Open GL configuration is reflected
correctly in the feature properties to the existing test_opengl_lib
autotest.
Change-Id: I645c947073dbb36da3be81de6bc62ee0ba1e73d6
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
