It's possible to configure an interface so that it isn't the case. I have
no idea if this is a valid scenario, but the unit test shouldn't enforce
that.
ip addr can report:
inet 192.168.1.1/32 brd 192.168.1.255 scope global vlan0
valid_lft forever preferred_lft forever
Change-Id: I8de47ed6c7be4847b99bffff141c337575760bd9
Reviewed-by: Richard J. Moore <rich@kde.org>
When the remote peer closed the connection, a read notification needs
to always be emitted, otherwise the higher layer does not get the
disconnected signal. From the other side, underlying QAbstractSocket
object could temporarily disable notifications from the engine at
any time. To avoid possible blocking of the socket, take a pending EOF
into account when the read notifications are re-enabled.
Change-Id: Iac9d4e2f790530be3500baf5a2000f1f63df5cc2
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
That API has been available for WinRT and Windows
Phone for some time now. By using it to get the
machine name and for hostname resolution we can get
rid of some winrt-only code and use qhostinfo_win.cpp
on WinRT and Windows phone as well.
Additionally the required capability was added to
tst_qhostinfo so that this auto test can be run without
any manual editing.
Change-Id: I63fa5521bf8cdb0c919bd5a0100ea977c865622a
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
In bind+connect scenario, rejected connection can trigger a read
notification while the socket is opened. But unlike UDP, reading from
the socket engine or emitting a readyRead() signal is not allowed for
the TCP socket in bound or connecting state.
To make a bind+connect scenario work properly, disable the read
notifications until a connection is established.
Task-number: QTBUG-50124
Change-Id: I7b3d015b0f6021fb9ff9f83560478aa5545f41f5
Reviewed-by: Richard J. Moore <rich@kde.org>
TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Commit 64a1448d87 (Qt 5.2) caused
QNetworkInterface to report address labels (a.k.a. interface aliases) as
separate interfaces. This is caused by the fact that glibc, uClibc and
MUSL copy the address label (netlink address attribute IFA_LABEL) to the
ifa_name field, which made QNetworkInterfaceManager think that it was an
interface it hadn't yet seen.
Address labels are the old way to add more than one IP address to an
interface on Linux, for example:
ifconfig eth0:1 192.0.2.2
Those do not create a new interface, so the "eth0:1" label maps to the
same interface index as the parent interface. This has been deprecated
for 10 years, but there are still tools out there that add addresses in
this manner.
This commit restores behavior compatibility with Qt 4.2-5.1. The Qt
5.2-5.5 behavior is incorrect because it reports more than one interface
with the same index. On systems configured like the above, the
tst_QNetworkInterface::interfaceFromXXX test was failing.
Change-Id: I8de47ed6c7be4847b99bffff141c2d9de8cf7329
Reviewed-by: Richard J. Moore <rich@kde.org>
Introduce QVERIFY2() to get some information when exactly it fails.
Change-Id: Icaddf2ecae434d0bafc90c18458c5ee067dfd506
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Move the code from cleanup() into a separate cleanupTestData()
and call this from initTestData() and cleanup(). Remove slot init().
Change-Id: I4e7b5b89197ed0aa50f46f730e9c1d9c59749614
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
A QAbstractSocket can be close()'d at any time, independently of its
current connection state. being closed means that we cannot use it to
read or write data, but internally it might still have some data to
send or receive, for example to an http server. We can even get a
connected() signal after close()'ing the socket.
We need to catch this condition and mark any pending data not yet
written to the socket for resending.
(cherry picked from commit 0df5d07929)
Task-number: QTBUG-48326
Change-Id: I67d9ad36f7288c9c6bef51aa6253d7b187737601
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
After canceling the asynchronous read operation, the
notified() slot receives ERROR_OPERATION_ABORTED.
We must not handle this situation as an error.
This amends commit 5ce567c5.
Task-number: QTBUG-48336
Change-Id: Iff948ceb3ad1f805a9de8c188fbc39ed4c76ba82
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Different multicast tests fail on different platforms for different reasons.
Blacklist them to get rid of insignificant and later fix/un-blacklist.
Change-Id: I91548366c7666478ea1cc446bbf337becfdefd49
Task-number: QTBUG-46612
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
As a follow-up for 5c1b9bbdf1 disable the
test on all platforms, since it fails on newer openssl. This was now
also happening on Windows, so until a fix is there, skip the test.
Change-Id: I6c8822c0ac5411b1114e9cd426219574ab1c9b54
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
A QAbstractSocket can be close()'d at any time, independently of its
current connection state. being closed means that we cannot use it to
read or write data, but internally it might still have some data to
send or receive, for example to an http server. We can even get a
connected() signal after close()'ing the socket.
We need to catch this condition and mark any pending data not yet
written to the socket for resending.
Task-number: QTBUG-48326
Change-Id: I6f61c35f2c567f2a138f8cfe9ade7fd1ec039be6
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
After calling connectToHost(), the socket enters HostLookup state. At this
stage, the socket engine was not created yet, and writing to the socket
should result in either data buffering or an error. So, add a check for
d->socketEngine to prevent a crash on unbuffered sockets.
Task-number: QTBUG-48356
Change-Id: I15ea9ce7de97ce6d7e13e358eca5350745b556bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Use QVERIFY2() with QTemporaryDir/File::errorString() consistently.
Attempt to catch issues like the below warning and follow-up issues.
QSYSTEM: tst_QFiledialog::clearLineEdit() QFileSystemWatcher: FindNextChangeNotification failed for "C:\Users\qt\_____aaaaaaaaaaaaaaaaaaaaaa" (Access is denied.)
Task-number: QTBUG-47370
Change-Id: I58a6e87c502627e976efa62ad73c912f3b2d49fa
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
There was a small amount of time between the last readDatagram() call
and disabling a read notifier in case the socket had a pending
datagram. If a new datagram arrived in this period, this qualified as
absence of a datagram reader. Do not change the read notifier state
because it is disabled on canReadNotification() entry and always enabled
by the datagram reader.
Thanks to Peter Seiderer, who investigated the same: "Querying
hasPendingDatagrams() for enabling/disabling setReadNotificationEnabled()
is racy (a new datagram could arrive after readDatagam() is called and
before hasPendingDatagrams() is checked). But for unbuffered sockets the
ReadNotification is already disabled before the readReady signal is
emitted and should be re-enabled when calling read() or readDatagram()
from the user."
However, this patch does not completely solve the problem under Windows,
as the socket notifier may emit spurious notifications.
Task-number: QTBUG-46552
Change-Id: If7295d53ae2c788c39e86303502f38135c4d6180
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This commit changes the readDatagram() and writeDatagram() virtual
functions to take a QIpPacketHeader as meta data, instead of a
QHostAddress/quint16 pair. As previously, the header is an "out"
parameter for readDatagram() and an "in" parameter for writeDatagram().
The header pointer in readDatagram() is allowed to be null if the
PacketHeaderOptions indicates WantNone. Otherwise, it must not be null.
The extra options parameter is introduced because we may not always want
all the metadata upon reception. For sending, we know what to include or
not based on what's set in the incoming header parameter.
QIpPacketHeader splits sender and destination because we'll be able to
return both on datagram reception.
Change-Id: Iee8cbc07c4434ce9b560ffff13ca4213255008c7
Reviewed-by: Richard J. Moore <rich@kde.org>
Mostly related to IPv6, because Q_IPV6ADDR is an array of char, so the
compilers were generating byte access to each value. Instead, force
access as 32- and 64-bit in most places that make sense (64-bit access
decays to 32-bit on 32-bit machines). In one isLoopback(), this is now a
128-bit access for best improvement.
Some smaller improvements relating to SpecialAddress by combining the
three IPv4 special addresses.
Change-Id: I7de033f80b0e4431b7f1ffff13f932b1cd7b5d21
Reviewed-by: Richard J. Moore <rich@kde.org>
This complements QHostAddress::isLoopback. The only missing check now is
for the "Any" address types, though operator== is quite fast nowadays.
Change-Id: Iee8cbc07c4434ce9b560ffff13cc2691e15014b6
Reviewed-by: Richard J. Moore <rich@kde.org>
The test is very flakey in 5.5 integrations and the OS X CI machines have
notorious problems with networking stability. So the previously listed tests
are not really at fault, it's an infrastructure problem, that we choose to
ignore for the time being.
Change-Id: I7fbfa7b3778daa6b5e60d95b822847c92927122f
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
SecureTransport does not implement QSslCertificatePrivate thus some
tests relying on generic version fail. Skip them for now.
Change-Id: I483340b37786a8a556e954b2c538e4f48a342be9
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
A couple of test always fail on OS X/iOS with SecureTransport
(simply not implemented yet).
Change-Id: Idd82262512938c36b657b497751738fdc804c182
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Richard J. Moore <rich@kde.org>
Also removed the XFAIL from connectToUnresponsiveHost
Change-Id: Ie0f5685a8fa437c00d22f9e76b51ac61347ce03b
Task-number: QTBUG-15111
Reviewed-by: Caroline Chao <caroline.chao@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Icaa1edafcc6e2779fbd6dbc2c058544d6e07f1e9
Reviewed-by: Richard J. Moore <rich@kde.org>
The QSslCertificate tests only covered certificates with RSA keys, this
extends the test coverage to DSA and EC keys.
Change-Id: Ibee26f449cf6c1d97cbac6b511972eb44d6f0bd2
Reviewed-by: Richard J. Moore <rich@kde.org>
The comment about non-OpenSSL backends not reproting a specific error
for self-signed certificates contained a typo, this fixes it.
Change-Id: I3010981d5d87d68ebf5e984c003b8bbbfb019b96
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Non-OpenSSL backends are not able to report a specific error code
for self-signed certificates.
Change-Id: I56bf130335b2afa65cf2bd5248a40ac0e32f74c2
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Fix warnings:
tst_qtcpsocket.cpp:245:9: warning: private field 'numConnections' is not used [-Wunused-private-field]
int numConnections;
^
tst_qtcpsocket.cpp:1834:9: warning: private field 'exitCode' is not used [-Wunused-private-field]
int exitCode;
tst_qcheckbox.cpp:86:10: warning: private field 'tmp' is not used [-Wunused-private-field]
uint tmp;
^
tst_qcheckbox.cpp:88:10: warning: private field 'tmp2' is not used [-Wunused-private-field]
uint tmp2;
Below warning is caused by code #ifdefed for OS X only, make it a local variable:
tst_qlabel.cpp:114:16: warning: private field 'test_edit' is not used [-Wunused-private-field]
QLineEdit *test_edit;
Change-Id: I53c755545fe2e7ca1f053f40c8c0e50aec2efcdd
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
This adds an OpenSSL-based implementation of the QSslKeyPrivate encrypt
and decrypt method. This puts both the OpenSSL-based and non-OpenSSL
backends (WinRT for now) on par.
Change-Id: I18a75ee5f1c223601e51ebf0933f4430e7c5c29b
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
I'm getting an error with WSARecvFrom in nativeBytesAvailable() and I
don't know why. The number of bytes obtained is correct and the test
works for 2 bytes, so let's use that.
The Windows nativeBytesAvailable() function has a comment saying that
WSAIoctl sometimes indicates 1 byte available when there's a pending
error notification, so that function proceeds to do a WSARecvFrom to
peek the number of bytes. Somehow that function in this test is getting
a SOCKET_ERROR I can't explain.
Change-Id: Ic5b19e556e572a72a9df9a405b1fee3b7efb8b24
Reviewed-by: Richard J. Moore <rich@kde.org>
