These special member functions have no purpose.
We never *documented* their semantics. Any code using them is
unconditionally wrong (which semantics was it assuming?), so we can
accept the SIC (type A). If a user needs such a copy, they would have to
reason on the intended semantics (relaxed? acquire/release?) and be
explicit in their code. Especially for assignment, they would need
understand the consequences of the memory ordering that apply on _each_
atomic object involved and not on the assignment operation as a whole
(there are no such semantics).
Testing this change on qtbase has already found bugs.
From a purely technical point of view: we don't guarantee lock-free
atomics nor we require them from the underlying platform. An atomic is
therefore allowed to be implemented as a mutex protecting a value, and
mutexes are not copiable. std::atomic follows the exactly same pattern
(not copiable nor copy-assignable) for exactly the same reasons, and Qt
atomics are implemented on top of std:: ones.
[ChangeLog][QtCore] The copy constructor and assignment operators of
Qt atomic classes (QAtomicInteger, QAtomicPointer) have been removed.
Their usage in user code should be considered a programming error, as no
memory ordering semantics were ever documented for these operations (and
therefore relying on any specific semantic would be relying on
undocumented, unportable behavior). This matches the API of the
std::atomic class in C++. Note that you can still use explicit
load/store operations to transfer a value across two Qt atomic objects,
and therefore use the memory ordering specified for the load/store
operations.
Change-Id: Iab653bad761afb8b3e3b6a967ece7b28713aa944
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Then we can easily test how fromLocal8Bit() and toLocal8Bit() behave
with different code-pages.
Pick-to: 6.6 6.5
Task-number: QTBUG-118318
Task-number: QTBUG-118185
Task-number: QTBUG-105105
Change-Id: Ib1cd3bccd27d598f4c80915557e332befcd96354
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove qt_poll_msecs() since the "forever" state can be simply expressed
with a QDeadlineTimer::Forever arg, instead of passing a nullptr
timespec, and the negative timeouts treated as "run forever" is also
encapsulated by QDealineTimer.
Use the QDealineTimer(qint64) constructor in the call sites where
the timeout could be negative, so that it creates a Forever timer (the
QDeadlineTimer(chrono::duration) constructor uses
setRemainingTime(duration) which handles negative timeouts by creating
expired timers).
Remove qt_gettime() (and do_gettime()).
Drive-by changes:
- Fix a narrowing conversion warning, qt_make_pollfd() takes an int
- Remove an unused include
Change-Id: I096319af5e191e28c3d39295fb1aafe9d69841e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since we use runtime plugins now and the test doesn't use any
symbols from openssl
Amends 486b1aec16
Pick-to: 6.6 6.5
Change-Id: Ib66d1ca15835c41fe138c7830ce3edd0bdce0d5f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This shall ultimately replace its timeSpec property, which had already
been turned into a derived property of an internal timezone.
[ChangeLog][QWidget][QDateTimeEdit] Added timeZone property to enable
a datetime edit widget to control the timezone used. This makes the
timeSpec property redundant; this old property shall be deprecated
from 6.10.
Fixes: QTBUG-80417
Change-Id: I3cdb686bd2dada0e5067f5b4c1828b73892e424a
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
When the array type is QJniObject or a subclass, then we need to
explicitly release the local reference returned by GetObjectArrayElement
in the QJniArray::at implementation. Do this by constructing the
QJniObject via fromLocalRef, which does exactly that.
Amends 80d4d55e25.
Add a test case that stresses the local reference pool, and fix the old
test case (which operates on a QJniArray<jobject>) to also release the
local references.
Change-Id: Ie293b1db9f1b6825376bbf12338b22dfc3f8c6e9
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The format is changed from 6.7 to support more than UINT32_MAX - 1
elements. The format used to have a quint32 size. Now if the size is
larger or equal to 0xfffffffe (2^32 -2) the old size is an extend
value 0xfffffffe followed by one quint64 with the actual value. The
32 bit size with all bits set is still used as null value.
Fixes: QTBUG-105034
Change-Id: I62188be170fe779022ad58ab84a54b1eaf46e5d9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QStringList] Added lastIndexOf() overloads that take
a QString/QStringView/QLatin1StringView and a Qt::CaseSenitivity
parameters. Prior to this calling lastIndexOf() would call the methods
inherited from the base class. This change is source compatible and
existing code should continue to work.
Task-number: QTBUG-116918
Change-Id: Ia50c884c00021bf581c23c12e0e0c22700dae446
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QStringList] Added filter(QLatin1StringView)
overload, which is more optimized when searching for a Latin-1 string
literal as no conversion to QString is necessary.
Task-number: QTBUG-116918
Change-Id: Ieb92f4cfd545b070258dbc5c701ddfb2e6f3fc64
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QStringList] Added indexOf() overloads that take
QString/QStringView/QLatin1StringView, and a Qt::CaseSensitivity
parameter. Prior to this using QStringList::indexOf() called the methods
inherited from the base class.
Task-number: QTBUG-116918
Change-Id: Ibc42130b6509f6ecfe7de0d6be378f226ae61982
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now that users can pass a QStringMatcher to do the matching, change the
existing overload to not use QStringMatcher.
Thanks to Giuseppe D'Angelo for the idea of passing a QStringMatcher to
filter instead of using a magic number to decide whether to use
QStringMatcher or not.
Results of running filter() and filter_stringMatcher, times are in msecs
and this was compiled with gcc -O3:
Without With QStringMatcher
list10 0.00022 0.000089
list20 0.00040 0.00014
list30 0.00058 0.00018
list40 0.000770 0.00023
list50 0.00094 0.00027
list70 0.0012 0.00037
list80 0.0014 0.00041
list100 0.0018 0.00050
list300 0.0054 0.0014
list500 0.0091 0.0023
list700 0.012 0.0032
list900 0.016 0.0041
list10000 0.17 0.045
Drive-by change: optimize tst_QStringList::populateList().
[ChangeLog][QtCore][QStringList] Added filter(const QStringMatcher &)
overload, which may be faster for large lists and/or lists with very
long strings.
[ChangeLog][Possible Performance Changes][QtCore][QStringList] Changed
the implementation of filter(QStringView) overload to not use
QStringMatcher by default. Using QStringMatcher adds overhead, so it is
beneficial/faster when searching for a pattern in large lists and/or
lists with long strings, otherwise using plain string comparison is
faster. If using QStringMatcher makes a difference in your code, you can
use the newly added filter(QStringMatcher) overload.
Change-Id: I7bb1262706d673f0ce0d9b7699f03c995ce28677
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of the previous realpath() comparison resulting from the symlink
processing. parseMountInfo() was extracting the device number from
/proc, so this information was already readily available.
We must take care of anonymous block devices (major == 0). Certain
filesystems, such as btrfs, always use them, so we must still stat() the
device path to get the real block device.
This implementation assumes that udev only creates entries in the
/dev/disks/by-label directory that are symlinks to real devices, but
that must already be the case because they are in /dev in the first
place. An alternative implementation would be to compare the inode and
host device (st_dev) of the entry, if different /dev entries could have
different labels. I don't think that's possible. But multiple /dev
entries for the same device is definitely possible.
Pick-to: 6.6
Change-Id: I9d43e5b91eb142d6945cfffd1787552af3d09676
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Otherwise we have no way of knowing which QStorageInfo entry was being
tested.
Previous:
FAIL! : tst_QStorageInfo::storageList() 'other.isValid()' returned FALSE. ()
Now:
FAIL! : tst_QStorageInfo::storageList(/run/user/0/gvfs) 'other.isValid()' returned FALSE. ()
Change-Id: I8f3ce163ccc5408cac39fffd178d786e596ece81
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When a child window is made visible without its parent having been
created yet, we defer creating and making the child visible until
the parent is created.
But if a child window is explicitly created, we create the parent
first. And creating the parent will in turn apply visibility to
all children that had their visibility deferred. Which includes
creating the child.
This results in child -> parent -> child creation recursion,
which means that when we return from creating the parent window
we already have a platform window for our child, and should
bail out.
Pick-to: 6.6 6.5
Change-Id: I11dc4864b57f031de2cca70b79cdfc057d4fbd0d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The existing pattern() method always returns a QString, which means that
if the matcher was constructed using a QStringView, pattern() would
uncoditionally convert it to a QString.
This is useful to check if a match is exact:
auto pattern = matcher.patternView();
if (pattern.size() == needle.size() && matcher.indexIn(needle) == 0)
....
This may be needed for a later change in QStringList::contains();
regardless of that, this change makes sense on its own.
Change-Id: I49018551dd22a8f88cf6b9f878a5166902a26f58
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add an overload for fontTable (we can't deprecate the const char *
overload as it will be used for string literals, even if the tag-
overload would work), and use the tag type in the test instead of
QByteArray.
Task-number: QTBUG-117046
Change-Id: I104f11a25e9c453a5d1081b6cf320bdc186b7e80
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Instead of overloads and generic string literals with runtime checks,
use a dedicated Tag type for specifying the font feature. The Tag type
can only be instantiated with a string literal of exactly 4 characters
(plus the terminating null)l; longer or shorter literals result in a
compile time error.
Constructing a Tag from any other string type is possible through the
named fromString constructor, in which case we can only check the length
and warn at runtime.
The type's API is almost completely constexpr so that we can use it to
calculate e.g. enum values.
Task-number: QTBUG-117046
Change-Id: I31038c7c6fd2b843a105b032f021e506b0b60822
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The declaration was moved out of the #if QT_CONFIG(openssl) block at
some point, but the definition was not. This caused compilation errors
when building without OpenSSL configured.
Pick-to: 6.6 6.5
Change-Id: I41ed85fd57f5a912498e0f2517761b81a7b8673c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For those that simply repeat or skip a whole calendar day, life is
fairly simple. However, Alaska's 24-hour transition at 15:30 LMT Sitka
(incidentally combined with a change of calendar) is a bit trickier.
Also fix a typo I noticed in passing.
Write tests to determine what the actual behavior is and document
enough to make the actual behavior seem unsurprising once encountered,
without trying to go into all the excruciating details. Naturally, MS
time-zone data lacks the data on the historic transitions involved in
these tests, so MS (when not using ICU's time-zone data) is excluded.
It seems Cupertino believes Alaska was always in the USA, too.
Change-Id: Ia638c04d2ffc3a956a70a2a85badb7bbfdbb791c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, requesting a time that got repeated - on the given date,
due to a fall-back transition - would get one of the two repeats,
giving the caller (no hint that there was a choice and) no way to
select the other. Add a flags parameter that captures the available
ways to resolve such ambiguity or select a suitable time near a gap.
Add such a parameter to relevant QDateTime methods, including
constructors, to enable callers to indicate their preference in the
same way. This replaces DST-hint parameters in various internal
functions, including QTimeZonePrivate's dataForLocalTime(). Adapted
tst_QDateTime to test the new feature.
Adapt to gap-times no longer being invalid (by default; or, when they
are, no longer having a useful toMSecsSinceEpoch() value). Instead,
they don't match what was asked for. Amend documentation to reflect
that. Most of the code change for this is to QDTParser and QDTEdit.
[ChangeLog][QtCore][QDateTime] Added a TransitionResolution parameter
to various QDateTime methods to enable the caller to indicate, when
the indicated datetime falls in a time-zone transition, which side of
the transition to fall or whether to produce an invalid result.
[ChangeLog][QtCore][Possibly Significant Behavior Change] When
QDateTime is instantiated for a combination of date and time that was
skipped, by local time or a time-zone, for example during a
spring-forward DST transition, the result is no longer marked invalid.
Whether the selected nearby date-time is before or after the skipped
interval may have changed on some platforms; unless overridden by an
explicit TransitionResolution, it is now a date-time as long after the
previous day's noon as a naive reading of the requested date and time
would expect. This was the prior behavior at least on Linux.
Fixes: QTBUG-79923
Change-Id: I11d5339abef9e7125c4e0dc95a09a7cd4f169dab
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... adding a bit of test coverage of keysToValue().
This is not intended as a reproducer for QTBUG-118240, because that
is concerned with inputs valueToKeys() cannot produce.
Task-number: QTBUG-118240
Pick-to: 6.6 6.5 6.2 5.15
Change-Id: I5d772be4231717cdbb5d033b1f11ae31e4c57c0b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QPalette specifically has quite a large amount of output (1363
characters) when toString
is called on it. We should make sure that we can fit that in our
failure messages. This patch does that by increasing the limit from
1024 characters to 4096.
Fixes: QTBUG-5903
Fixes: QTBUG-87039
Pick-to: 6.5 6.6
Change-Id: I1dc5078ad05858bb6542c3a06c6b84711af79e4f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The comment in this function made it clear that it really depended on
the size of the pipe buffer in the OS. I don't see a way to make a pipe
default to a different size on Linux -- it always defaults to
PIPE_DEF_BUFFERS (16) and that value is only increased as a result of
fcntl(F_SETPIPE_SZ), which we don't do. But we can be defensive and
simply write until the OS can't take any more data.
Drive-by update the comment on Windows to be clear that bytesToWrite()
does work, but only while the child process is still running.
Pick-to: 6.6
Task-number: QTBUG-80953
Change-Id: I9d43e5b91eb142d6945cfffd17866d22a4127e5e
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Drive-by change, initialize a QList with std::initializer list instead
of old style operator()<<.
Change-Id: If5745a4554772661df438e757518f8cb55a8a55c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Amends commit 78d0b6e975 ("Ignore failing
test for free space on APFS") and merges it with the btrfs code, which
seems to have the same problem. But unlike Linux systems with btrfs,
Apple systems don't usually have another filesystem available so we
don't bother to try and find another.
Change-Id: I8f3ce163ccc5408cac39fffd178d7b4c13f0dfd1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
These tests skip when we're writing to a btrfs filesystem because, for
some reason, the amount of free space does not update synchronously with
file writing. But instead of giving up if $TMPDIR is a btrfs, let's try
and use the $XDG_RUNTIME_DIR, which is usually a tmpfs.
This will work in the CI for the openSUSE set ups, where / is btrfs,
/tmp is not a separate tmpfs, but /run/user/1000 is available.
FAIL! : tst_QStorageInfo::tempFile() The computed value is expected to be different from the baseline, but is not
Computed (free) : 25510780928
Baseline (storage2.bytesFree()): 25510780928
Loc: [tst_qstorageinfo.cpp(234)]
Pick-to: 6.6
Change-Id: I8f3ce163ccc5408cac39fffd178d7af1c67ec988
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Almost all operations on a QJniObject require a QJniEnvironment,
including the construction and destruction of a QJniObject. Instead of
instantiating a temporary QJniEnvironment object in each call, store the
one from the constructor in the private, and reuse it.
Pass the stored environment through to other functions needing it, and
add a checkAndClearExceptions() wrapper.
Static class members still need their own QJniEnvironment, but we can
reuse the one we have to get both jclass and jmethodID rather than
creating new QJniEnvironments in several wrappers.
As a drive-by, clean up nullptr usage in the test that failed when
shortcutting isSameObject for the trivial cases.
Change-Id: Ibadbd2be8a0ec9ab62daf285608ee7fe0a3c8852
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Our signature mapping treats both e.g. bool and jboolean as "Z", and it
is allowed to pass a bool variable as an argument to a function expecting
a jboolean. Except for fields and callMethod return values, where we only
allowed the JNI primitive types.
Fix this by comparing the signatures and size of the type we have with
the JNI types that there are explicit functions for. Cast from and to
the JNI type in both directions to address narrowing (e.g. jboolean is an
unsigned char and converting to bool would be narrowing, even though
both are 8bit types).
This way we can get boolean fields using getField<bool>, and int fields
using getField<int> etc.
Change-Id: I2f1ba855ee01423e79ba999dfb9d86f4b98b1402
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
So we can more easily get any errors from attempting to write the file.
It is possible to get them with QFile, by either doing .flush() or using
QIODevice::Unbuffered, but using the C API is a definite sure way. Plus,
since this is QFileSystemEngine, this avoids the possibility that QFile
may choose to use a different file engine than the native one, for some
reason. And it reduces overhead.
This allows us to more easily detect why the file creation failed and
therefore stop looping if the error wasn't EEXIST. That will avoid an
infinite loop in case the necessary directories exist but aren't
writable.
It's also moved above the renaming, such that the failure to populate
the info file prevents the renaming too. Both operations can have the
same likely errors, ENOSPC and EIO. The likelihood of EIO is very low,
for both; but for ENOSPC it's far more likely for writing the
file. Avoiding the ENOSPC error for the renaming is handled in a later
commit.
Change-Id: I9d43e5b91eb142d6945cfffd1786d417142ac728
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Add two overloads to QNetworkAccessManager to support GET requests
with body.
Modify QNetworkReplyHttpImpl as well as these requests should not
be cached.
If the request is redirected it is possible that its type changes
from POST/PUT to GET and in this case the message body is deleted.
However, if a GET request has a body it should keep it after it has
been redirected - modify QNetworkReplyHttpImpl to keep the message
body after it has been redirected.
Fixes: QTBUG-112871
Change-Id: Ib01898638ed94238a98291870a5c51d56030868a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
It deoesn't like single quotes, which must be replaced with doubled-up
double quotes.
Pick-to: 6.2 6.5 6.6
Change-Id: I8e5f8047e72e4433926a9f4f2044407a4d823682
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We were using the .remove(Key) API on the map instead of
erase(iterator), so we were removing any reply of the same priority that
had not yet been popped from the queues.
Rewrote to drop loop and only work with iterators.
This issue was there since SPDY days, so not picking all the way back to
5.15, where HTTP2 anyway is not enabled by default.
As a drive-by, drop the #ifndef QT_NO_SSL, which was also there from
SPDY times, which was TLS-only.
Pick-to: 6.6 6.5 6.2
Fixes: QTBUG-116167
Change-Id: Id7e1eb311e009b86054c1fe3d049c760d711a18a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Implements an iterator API and other standard member access functions
for sequential containers so that we can use ranged-for over an object
that is a jarray. Provides read-only access to individual elements
(which is mostly relevant for arrays of objects), or the entire data()
as a contiguous memory block (which is useful for arrays of primitive
types).
QJniObject call functions can return QJniArray<T> when the return type
is either explicitly QJniArray<T> or T[], or their Qt equivalent (e.g.
a jbyteArray can be taken or returned as a QByteArray). If the return
type is a jarray type, then a QJniObject is returned as before.
Arrays can be created from a Qt container through a constructor or the
generic fromData named constructor in the QJniArrayBase class, which
implements the generic logic.
Not documented as public API yet.
Added a compile-time test to verify that types are mapped correctly.
The function test coverage is added to the QJniObject auto-test, as
that already provides the Java test class with functions taking and
returning arrays of different types.
Change-Id: I0750fc4f4cce7314df3b10e122eafbcfd68297b6
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Ensure that this environment variable is respected, as ASAN errors
(e.g. memory leaks) can cause the selftests to fail since they expect
no errors in their output.
Fix an incorrect function name in a comment, while we're at it.
Fixes: QTBUG-118041
Pick-to: 6.5 6.6
Change-Id: I07502101aabd8743df898ae8fe4a693c4733c4af
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
These must pass, but they're highly unlikely to be trashable because
/var/tmp is usually not its own filesystem (it might be a subvolume of
its own, but usually isn't). Instead, it's usually part of / or /var.
On my machine:
openat(AT_FDCWD, "/var/.Trash", O_RDONLY|O_NOFOLLOW|O_CLOEXEC|O_DIRECTORY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/var/.Trash-1000", O_RDONLY|O_NOFOLLOW|O_CLOEXEC|O_DIRECTORY) = -1 ENOENT (No such file or directory)
mkdirat(AT_FDCWD, "/var/.Trash-1000", 0700) = -1 EACCES (Permission denied)
Change-Id: Ifeb6206a9fa04424964bfffd17884246a4d27443
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Both QTemporaryFile and QTemporaryDir are documented to use the current
directory if given a pattern. That can be anything & arbitrary, so it
doesn't give us consistency in checking. Moreover, it might be a read-
only directory.
Drive-by fix the number of 'X'.
Task-number: QTBUG-117449
Pick-to: 6.6
Change-Id: Ifeb6206a9fa04424964bfffd178841c44e9636a0
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
QtTest can't handle a test that does both. This ends up recorded as a
skip in the summary.
Pick-to: 6.6
Change-Id: Ifeb6206a9fa04424964bfffd1788412a438085b0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This base class implementation for COM objects provides IUnknown
interface implementation with reference counting which will allow to
keep all this functionality and implementation in the same place.
Pick-to 6.6 6.5
Change-Id: I8ec597b1040ac33295317e06338ffdcb61b78f85
Reviewed-by: Jøger Hansegård <joger.hansegard@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Makes it easier to get an idea of what went wrong
Change-Id: Idace20ecf008fa906780881b62ed44ac36751123
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It was weird that they were missing. Now that C++23 added them to
std::span, add them to QSpan, too.
Pick-to: 6.6
Change-Id: I4a9b1fdeda66bc7b133c8f7b3b269656e5faffa3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
All these TUs relied on transitive includes of qpointer.h, maybe to a
large extent via qevent.h, though, given that qevent.h is more or less
the only public QtBase header that includes qpointer.h, something else
seems to be at play here.
Said qevent.h actually needs QPointer in-name-only, so a forward
declaration would suffice. Prepare for qevent.h dropping the include.
The algorithm I used was:
If the TU mentions 'passiveGrabbers', the name of the QEvent function
that returns QPointers, and the TU doesn't have qpointer.h included
explicitly, include it. That may produce False Positives, but better
safe than sorry. Otherwise, in src/, add an include to all source and
header files which mention QPointer. Exception: if foo.h of a foo.cpp
already includes it, don't include again.
Task-number: QTBUG-117670
Change-Id: I3321cccdb41ce0ba6d8a709cea92427aba398254
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This changes takes Qt for Android Java code away from the Delegate
classes that uses heavily Java reflection to invoke Activity/Service
calls and overrides. So instead of that, now, we have a QtActivityBase
and a QtServiceBase classes which handle the override logic needed for
Qt directly without reflection.
These Base classes extend Android's Activity and Service directly, and
are inside the internal Qt android package (under Qt6Android.jar).
For example, to handle onConfigurationChanged, instead of the current
way where we need this in QtActivityDelegate:
public void onConfigurationChanged(Configuration configuration)
{
try {
m_super_onConfigurationChanged.invoke(m_activity, configuration);
} catch (Exception e) {
e.printStackTrace();
}
handleUiModeChange(configuration.uiMode &
Configuration.UI_MODE_NIGHT_MASK);
}
And then this in QtActivity:
@Override
public void onConfigurationChanged(Configuration newConfig)
{
if (!QtLoader.invokeDelegate(newConfig).invoked)
super.onConfigurationChanged(newConfig);
}
public void super_onConfigurationChanged(Configuration newConfig)
{
super.onConfigurationChanged(newConfig);
}
And having to keep it's Method handles around and then use Java
reflection
to call the override behavior done by Qt and the superclass methods.
instead of that, we can do it now in QtActivityBase like:
@Override
public void onConfigurationChanged(Configuration newConfig)
{
super.onConfigurationChanged(newConfig);
handleUiModeChange(newConfig.uiMode &
Configuration.UI_MODE_NIGHT_MASK);
}
Then, we would still have our user facing QtActivity class which extends
QtActivityBase and benefit from the same implementation of Qt logic done
in the base class.
An additional benefit to this approach is that now QtActivity will be
very lightweight and doesn't need to have all the boilerplate code as
before.
[ChangeLog][Android] Simplify Qt for Android public bindings
(QActivity, QtService and QtApplication) by implementing base
classes which use the delegate implementions directly and avoid
reflection.
Task-number: QTBUG-115014
Task-number: QTBUG-114593
Change-Id: Ie1eca74f989627be4468786a27e30b16209fc521
Reviewed-by: Tinja Paavoseppä <tinja.paavoseppa@qt.io>
The loops are iterating over local const containers, so use ranged-for.
Remove '#undef QT_NO_FOREACH'.
Task-number: QTBUG-115839
Change-Id: I252f048e3c469bf9bb34cb0756ccbd57571fd886
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
GestureWidget::ignoredGestures QSet:
- elements are inserted in the container in a top-level test function,
then a CustomEvent is constructed and sendCustomGesture() is called,
which sends the events, invoking the GestureWidget::event() overload,
the latter iterates over the container, thus the container isn't
changed while it's being iterated over, because the code can't recurse
into the top-level test function and that's where the container is
modified later on (by inserting or by calling widget.reset() which
clears the container)
- the loop body doesn't change the container
So use ranged-for and std::as_const.
The same logic applies to the GestureItem::ignoredGestures QSet.
Task-number: QTBUG-115839
Change-Id: Icf95e90a8af5aa7e947035704121557494afc326
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It noted that an unspecified function claimed the offset it was
checking should be +1, while testing it against that or -1. The
function turns out to be QDateTime::addDays(), whose doc did indeed,
misleadingly, say that it lands after a gap it would have hit. It in
fact overshoots the gap in the direction of its change. Amend its
docs, likewise those of addMonths() and addYears(), to reflect the
true behavior.
Amend the test to look at the direction of the step its taking and
anticipate that the adjustment will be in the same direction; then
compare the actual adjustment to that.
Change-Id: I9ab918fac0ab2195ef014983f37fccc435bf0498
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The implementation previously worked for non-short date-times, where
the offset has been remembered since construction. This included the
case of zoned times (and local times more than 2^55 msec away from the
start of 1970) that hit a spring-forward's gap; but excluded local
times that did the same (within 2^55 msec of the epoch).
This precluded an offset check in a spring-forward test, now added.
We can in fact determine the offset whenever we got a valid date and
time (we do so in the course of initializing the object, and when
asked for toMSecsSinceEpoch(), even when invalid), and we should not
use the value of the recorded offset if we didn't get a valid date and
time, so amend to always return 0 if we didn't get valid date and time
and always report the correct offset otherwise.
In the process, amend offsetFromUtc()'s computation to directly
resolve the date-time, rather than doing so via toMSecsSinceEpoch(),
which has to repeat decision-making offsetFromUtc() has already done
by the time it calls it. Also amend toMSecsSinceEpoch() to return 0 if
we didn't have a valid date and time to begin with, so it only
attempts to produce a useful result in the case where construction
attempted to resolve the date-time.
Change-Id: I6574e362275ccc4fbd8de6f0fa875d2e50f3bffe
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The resolution selects a point in time outside the gap, which will be
represented by toMSecsSinceEpoch()'s return, despite the QDT object's
isValid() returning false. Previously we retained the
originally-calculated msecs, so as to keep date() and time() matching
what was asked for. However, this required adjusting offset, which was
not remembered for local times within 2^55 milliseconds of the start
of 1970. This lead to an inconsistency between the offset from UTC
reported for the resolution for a local time further from the epoch,
or for a time-zone, and the actual offset from UTC at the time
indicated by the return from toMSecsSinceEpoch().
Instead, retain the actually calculated offset (even if we aren't
going to remember it) and adjust the msecs to the value that ensures
toMSecsSinceEpoch() will get the selected resolution. This
incidentally means that, when toMSecsSinceEpoch() has to re-resolve
(for a local time within 2^55 msecs of the epoch), it avoids
revisiting the complications of hitting the gap.
In passing, change internal stateAtMillis() to take the QTimeZone it
is passed by const reference, to save a copy (noticed during debug).
Also tweak a comment in a test to be explicit about a default value.
[ChangeLog][QtCore][Possibly Significant Behavior Change] When
QDateTime is instantiated for a combination of date and time that was
skipped, by local time or a time-zone, for example during a
spring-forward DST transition, the invalid result's time() - and, in
rare cases, date() - no longer match what was asked for. Instead,
these values and offsetFromUtc() now match the point in time
identified by toMSecsSinceEpoch().
Change-Id: Id61c4274b365750f56442a4a598be5c14cfca689
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
If a QShortcut is registered with a QWindow as its parent, but QApplication
is used, we end up in QApplicationPrivate::createShortcutPrivate(), and
create a QtWidgetsShortcutPrivate that implements shortcut context matching
via qWidgetShortcutContextMatcher.
The problem is that qWidgetShortcutContextMatcher expects the windows
to be QWidgetWindows, which meant that plain QWindow based shortcuts
would always fail.
This can happen for example if a QApplication is used in Qt Quick
to provide dialog fallbacks, but QShortcuts are otherwise used
with plain QWindows, or QQuickWindows e.g.
We now defer the check of whether there's an active (widget) window,
and fall back to QtGui's simpleContextMatcher in case we don't find
a QWidget, QAction, or QGraphicsWidget shortcut owner to handle
the matching for.
Note: We don't support shortcut matching for QAction in QtGui,
but this is left for another day. There is also a discrepancy
between how QtGui and QtWidgets handles Qt::ApplicationShortcut.
The former will treat it as a match even if there is no active
QWindow, while the latter requires that there's an active widget
window.
Fixes: QTBUG-116221
Change-Id: I487995f2e660a40f6556828b84a521d81a58f1b6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
After d9bb8c0a17 we call inputDirection()
on the platform input context to initialize the direction at startup.
The test can't assume there are no other callers to the functions
in the QPlatformInputContext layer.
Change-Id: Ic1cecd608b2759e703a17838fcf24b4ff53ad07e
Reviewed-by: Liang Qi <liang.qi@qt.io>
Since it hides QFile's overloads this was not supported for
QTemporaryFile.
[ChangeLog][QtCore][QTemporaryFile] Added support for passing
std::filesystem::path to rename and createNativeFile.
Change-Id: I909ff1d5b9c586824c9901d7dad278dfad09ffc3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We were already doing this for a key combination without modifiers,
but now we do the same for e.g. Control+Unknown. This matches the
behavior we have for QKeySequencePrivate::decodeString(), where
we return Qt::Key_Unknown if we can't resolve the key, even if
we have resolved some valid modifiers, e.g. "Meta+Trolls" as in
the tst_QKeySequence::parseString() test.
Change-Id: I238e29276e6ce356ae60c67585739587fa388f07
Reviewed-by: Liang Qi <liang.qi@qt.io>
Added moveToTrashDuplicateName() to see what happens if you attempt to
trash two files with the same exact full path. Both files should get
independently moved to the trash bin and not clobber each other.
Added moveToTrashXdgSafety() to test that QFileSystemEngine will
properly skip over an unsafe $root/.Trash directory, as required by the
XDG specification. I think the specification should also make security
requirements on $root/.Trash-$uid too, but that's for another change.
Pick-to: 6.6
Change-Id: I9d43e5b91eb142d6945cfffd1786cd60e4244c7c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
qnativesocketengine_win.cpp: don't check if timeout is < 0, because
remainingTimeAsDuration() doesn't return negative values.
All the changes done in one go, not function by function, as that causes
the least churn. You can think of them as a couple of very similar
changes repeated various times.
Drive-by change: replace `forever {` with `for (;;)`
Task-number: QTBUG-113518
Change-Id: Ie9f20031bf0d4ff19e5b2da5034822ba61f9cbc3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When a dock widget is closed while floating, it still reports being
floating even though the QWidget::windowHandle()->isVisible() returns
false. This is documented behavior and will not be changed.
c153066baa relied on the isFloating() to
return false, if the dock widget is closed. When the window title was
changed by setWindowTitle(), the change was overridden by reading the
old value from the window handle.
=> Amend the patch and add a windowHandle()->isVisible() as a condition.
In c153066baa, an autotest for the title
propagation (QTBUG-113591) was added to floatingTabs().
=> Harden the setWindowTitle() test function. Move the tests related to
QTBUG-113591 and QTBUG-117764 to this function.
Fixes: QTBUG-117764
Pick-to: 6.6 6.5
Change-Id: Id37a9a22d4d13abad4ea55c74ea4e834bdb2bfab
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
By fixing how many requests we are expecting to _finish_.
Since the nRequests variable is only decreased once a
request is finished, we only actually expect 1. No matter
how many times it gets redirected.
This was the slowest test-function in the test, clocking in at
10 seconds. Now it's sub 500ms.
Pick-to: 6.6 6.5
Change-Id: I544360f0928466c1bc0fbc6806952ccec588d131
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QItemDelegate was superseded since Qt4 by QStyledItemDelegate but it
took until Qt6.7 to remove the last occurrences in qtbase.
- remove unused includes / replace with qabstractitemdelegate.h
- replace references in the documentation with QStyledItemDelegate
- adjust the examples and tests to use QStyledItemDelegate
Pick-to: 6.5 6.6
Change-Id: I246755004ce2d01192a726ca0972106c237df0cc
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
On some xcb platforms the xcb_configure_notify_event_t is sent after the
window is fully exposed which leads to a wrong position for
QWidget::mapToGlobal() which makes the test fail.
Fix it by waiting for a move event with a position != 0,0 before
starting the drag'n'drop operation.
Fixes: QTBUG-94250
Change-Id: If91a15815205ba9dcea36248d9de03ed0a7e5822
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
and add QChar overload to reduce allocations
Also port tests from char* literals to char16_t literals
Change-Id: I99381a2da08d9d35e6135c48bd92bd8d72533065
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Construction from nullptr wasn't, before, because it was using the
QPointer(T*) constructor, which cannot be constexpr. Add a constexpr
QPointer(std::nullptr_t) constructor to enable this use-case.
This requires to mark the (T*) constructor as Q_WEAK_OVERLOAD,
otherwise legacy construction from a literal 0 would be ambiguous.
No documentation changes needed, as the set of valid expressions
(apart from constinit'ing) has not changed. Mention the nullptr ctor,
though, without \since.
Add a test to confirm that contruction from derived still works.
Change-Id: If9d5281f6eca0c408a69f03fecba64a70a0c9cf0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Ignore expected warning messages when looking up classes, methods, or
field that don't exist. Make the test implicitly fail for any other
warning messages.
Change-Id: I79ec799102b1ab9424aa39c5255413931b8ad152
Reviewed-by: Petri Virkkunen <petri.virkkunen@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
In non-static builds, of course.
Change-Id: Ifbf974a4d10745b099b1fffd1777ac97c0921759
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
A Qt::ApplicationShortcut shortcut is not tied to a specific window.
We do however document that the shortcut "is active when one of the
applications windows are active", which seems like a strange limitation,
but for now we honor it in our test as well by making another window
active.
Change-Id: I235230ff69df29ee43d356d3efaeedb20071faf3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Construction from nullptr isn't, because it's using the QPointer(T*)
constructor, which cannot be constexpr.
Pick-to: 6.6 6.5
Change-Id: I19129a0fca5873e83d20351a909a7994399bfcce
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a testcase to make sure the signals for moveing rows are properly
connected from the model to the corresponding QHeaderView slots.
Task-number: QTBUG-117698
Pick-to: 6.6 6.5
Change-Id: I354f8836d3de58a8bf51da7a8c0859a673ec9339
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Named instances of variable application fonts are exposed
automatically through CTFontManagerCreateFontDescriptorsFromData()
(and also for the URL equivalent).
The main change here is just to call this instead of the overload
which only returns the first font.
Note that this also updates the test: This is because the conversion
from CoreText normalized weight values to TTF values is not 100%.
In the CoreText code, we map Heavy (0.56) to ExtraBold, but ExtraBold
gets converted to 0.6, which is closer to the CoreText value for Black
(0.62).
To avoid hitting this inconsistency, the QtExtraBold has been changed
to Black weight instead, which resolves to the same on all platforms.
Task-number: QTBUG-108624
Change-Id: Ied6d42e9e3e1ba8b7102936c5be3d285b3d9e07f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
There's no need for the manual sendKeyEvent, as QTest already
has the ability to send synthetic clicks, and we don't need
a colored window to test shortcut activation.
Pick-to: 6.6
Change-Id: I8409888664e2316bec4ea64f21dbb8b6915091f4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
- Initialize QStringList with an initializer_list instead of old style
operator <<()
- Use Qt::StringLiterals more, better readability
- Test CaseSensitivity
Change-Id: If7dde14333d54b8c2f682036634ad94d5f9f9c74
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For GDI, there doesn't seem to be any way to do this, so it depends
on selecting the DirectWrite font database explicitly.
This moves the supportsVariableApplicationFonts() check into the
QPlatformFontDatabase instead of the font engine, since that's
where it belongs.
[ChangeLog][Fonts] Added support for selecting named instances in
variable application fonts when using the DirectWrite backend.
Task-number: QTBUG-108624
Change-Id: I51e0fedd7a9616088a06453a1d17f48bd18fa5a7
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Fix runtime warnings about testdata with the same name.
Pick-to: 6.6 6.5
Change-Id: I5d4927cc53be3e08a524498db42a8a08396ced8e
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
The jbyte type is a signed char, which also promotes to int in variadic
argument functions.
Extend the test case to make sure that we don't get any warnings for
the most relevant parameter types.
Change-Id: I7811e1eebdbc989ab5989eb1a2c502acd0540bc7
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
Reviewed-by: Zoltan Gera <zoltan.gera@qt.io>
When changing the selected index in a combo box,
also update the current index in the item view's
selection model right away, and don't delay this
until when the combobox popup gets shown in
QComboBox::showPopup.
This is needed to make sure that the selection
is properly exposed to the accessibility layer.
On the accessibility layer, QAccessibleComboBox,
the a11y implementation for the combobox, exposes
the entries in its list child
(s. QAccessibleComboBox::child) and Orca queries
the selected item when the combobox gets focus,
which didn't return the proper results earlier,
resulting in no or the wrong entry getting
announced.
Extend the existing combobox a11y tests
accordingly.
Pick-to: 6.6 6.5
Fixes: QTBUG-117644
Change-Id: Ia26de5eafd229f7686745a2fbe03fc1eb6a713f8
Reviewed-by: Liang Qi <liang.qi@qt.io>
Implement the missing overload to handle UTF-8 specific data types,
including char8_t (C++20), char, uchar and signed char.
Introduce the helper function 'assign_helper_char8' which handles the
non-contiguous_iterator case. The contiguous_iterator case is already
handled by the QAnyStringView overload.
Include 'qstringconverter.h' at the end of the file, since it can't
be included at the top due to diamond dependency conflicts.
QStringDecoder is an implementation detail we don't want users to
depend on when using assign(it, it). It would be unnatural to not
be able to use a function just because we didn't include an
apparently unrelated header.
[ChangeLog][QtCore][QString] Enabled assign() for UTF-8 data types.
Fixes: QTBUG-114208
Change-Id: Ia39bbb70ca105a6bbf1a131b2533f29a919ff66d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This change can be described in the following 2 categories:
1. Support 3 ways to escape identifiers mentioned in SQLite Keywords
In SQLite Keywords (https://sqlite.org/lang_keywords.html), it shows
that there are 3 ways to escape identifiers, i.e., "", [], ``. So, I
have overridden "bool isIdentifierEscaped(const QString &,
IdentifierType)" to support it. In addition, there was a bug of
_q_escapeIdentifier. If there is a field name called length [cm],
which uses square brackets to show units, _q_escapeIdentifier will
not escape it to "length [cm]".
2. Identify identifiers correctly if identifiers have been escaped
There is a bug of QSQLiteDriver::record and
QSQLiteDriver::primaryIndex.
If we input escaped identifiers with separator, let's say
"databaseName"."tableName", both will change the input into
databaseName"."tableName, which is incorrect and causes
qGetTableInfo cannot get the right results. In addition, I overrode
stripDelimiters to strip "databaseName"."tableName" correctly.
There are still some assumptions for isIdentifierEscaped,
escapeIdentifier, and stripDelimiters, but I think this change it better
than what we have now.
1. For isIdentifierEscaped, if identifiers have a dot and the dot is a
separator, it is the users' responsibility to escape the pair of
schema and table name correctly. For example,
"aSchemaName"."aTableName", not "aSchemaName".a"TableName". That's
because we don't know whether the dot is just a dot of the name or a
separator.
2. For escapeIdentifier, if identifiers have a dot and the parts before
and after the dot are not escaped, escapeIdentifier will treat the
dot as part of the table name or field name. The same as the item
above, it is users' responsibility to do it right.
3. For stripDelimiters, the same as above, it is users' responsibility
to do escape if users want to use format schemaName.tableName or
tableName.fieldName.
Change-Id: I9d036a2a96180f8542436188f75a220a0fe58257
Reviewed-by: Po-Hao Su <supohaosu@gmail.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
We want to test the traits even on nonsensical types.
Change-Id: I63ed022c9529d9de9d336157e6f025937321ca16
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Now that QtJniTypes::Objects are no longer primitive types that are the
same as a jobject, using those types in registered native functions
breaks. JNI will call those function with a jobject on the function
pointer, and lacking any type safety, the call to the registered
function will proceed with a wrong type of object on the stack.
To fix that, register the native function via a proxy that is a variadic
argument function, and unpack the variadic arguments into a list of
typed arguments, using the types we know the user-code function wants.
Then call the function with a tuple of those types using std::apply,
which gives us type safety and implicit conversion for free.
Add a test that exercises this.
Change-Id: I9f980e55d3d13f8fc16c410dc0d17dbdc200cb47
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
Instead of having a type that doesn't behave like a QJniObject, which
includes not holding a proper reference on the Java object, make the
QtJniTypes::Object type a QJniObject subclass that can be specialized
via CRTP to provide type-specific constructor and static functions.
QJniObject doesn't have a virtual destructor, but we subclass it only to
add a typed interface, without adding any additional data members.
Add versions of the static functions from QJniObjects to the
QtJniTypes::Object so that they can be called without explicitly
specifying the type or class name. This includes a constructor and named
constructors.
Constructing such objects means constructing a Java object of the class
the object type represents, as per the Q_DECLARE_JNI_CLASS declaration.
This is not without ambiguity, as constructing a type with a jobject
parameter can mean that a type wrapping an existing jobject should be
created, or that a Java object should be created with the provided
jobject as the parameter to the constructor (e.g. a copy constructor).
This ambiguity is for now inevitable; we need to be able to implicitly
convert jobject to such types. However, named constructors are provided
so that client code can avoid the ambiguity.
To prevent unnecessary default constructed QJniObjects that are then
replaced immediately with a properly constructed object, add a protected
QJniObject constructor that creates an uninitialized object (e.g. with
the d-pointer being nullptr), which we can then assign the constructed
jobject to using the available assignment operator. Add the special
copy and move constructor and assignment operators as explicit members
for clarity, even though the can all be defaulted.
Such QJniObject subclasses can then be transparently passed as arguments
into JNI call functions that expect a jobject representation, with the
QtJniTypes::Traits specialization from the type declaration providing the
correct signature.
QJniObject's API includes a lot of legacy overloads: with variadic
arguments, a explicit signature string, and jclass/jmethodID parameters
that are completely unused within Qt itself. In addition the explicit
"Object" member functions to explicitly call the version that returns a
jobject (and then a QJniObject). All this call-side complexity is taken
care of by the compile-time signature generation, implicit class type,
and template argument deduction. Overloads taking a jclass or jmethod
are not used anywhere in Qt, which is perhaps an indicator that they,
while nice to have, are too hard to use even for ourselves.
For the modern QtJniTypes class instantiations, remove all the overhead
and reduce the API to the small set of functions that are used all over
the place, and that don't require an explicit signature, or class/method
lookup.
This is a source incompatible change, as now QJniTypes::Object is no
longer a primitive type, and no longer binary equivalent to jobject.
However, this is acceptable as the API has so far been undocumented,
and is only used internally in Qt (and changes to adapt are largely
already merged).
Change-Id: I6d14c09c8165652095f30511f04dc17217245bf5
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
If we construct the QJniObject from a jobject, then we know the jclass,
but not the class's name. If className is called while the stored name
is empty, get the name of the jclass and updated the stored value.
Change-Id: Ic3332a6da2dac1eb6842f90da1b9264398a43155
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
currentCompatProperty should point to the compat property that's
currently being evaluated. As soon as we start evaluating a new compat
property, it's invalid by definition. Temporarily disable it then.
Pick-to: 6.6 6.5 6.2
Fixes: QTBUG-109465
Change-Id: I7baba9350ebf488370a63a71f0f8dbd7516bf578
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
To be used in QWeakPointer.
Change-Id: I5ee9dd0862a0b23d316aaadf5d68bef1ce609e8b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fail the test when an unexpected warning message about a field, class,
or method not being found is generated from a JNI exception. Fix the
failure when trying to look-up a boolean field that is no longer
available, and ignore the one expected message from looking up an
unavailable class explicitly.
Change-Id: Ic5e4c003c64272f06a6d4da028e232abba75c4e4
Reviewed-by: Zoltan Gera <zoltan.gera@qt.io>
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
Support this both for parameters and return types, in all template
functions for calling methods or accessing fields.
To manage the life-time of the temporary objects, create a local stack
frame in the JVM around the calling function. Popping that implicilty
releases all local refernces, so that we don't have to worry about
doing so explicilty. Adding a local reference to the temporary jstring
objects is then enough for the object to live as long as it's needed.
The LocalFrame RAII-like type needs a QJniEnvironment to push and pop
the frame in the JVM, so we don't need a local QJniEnvironment anymore.
Reduce code duplication a bit as a drive-by, and add test coverage.
Change-Id: I801a1b006eea5af02f57d8bb7cca089508dadd1d
Reviewed-by: Tinja Paavoseppä <tinja.paavoseppa@qt.io>
Add compile-time testing to make sure that we can declare a JNI
class String that maps to java/lang/String.
Change-Id: I2b68b2b46112e56b279f3fcddc3d71847a005924
Reviewed-by: Petri Virkkunen <petri.virkkunen@qt.io>
Reviewed-by: Zoltan Gera <zoltan.gera@qt.io>
Reviewed-by: Tinja Paavoseppä <tinja.paavoseppa@qt.io>
QlistWidgets with sorting enabled do not sort stable. A re-sort is
triggered when any Qt::ItemDataRole is changed and not only when
Qt::DisplayRole is changed. Due to an unstable optimization, the changed
element gets inserted at the beginning of their respective "equivalence
group".
This patch disables the optimization and ensures stable sorting
with std::stable_sort. Sorting is only performed, if the subset of
changed items in the range [begin, end] is not already sorted in the
whole list. For this purpose, it is assumed that the list has already been sorted before begin and after end. This assumption minimizes the subset to check.
Limits / side effect:
The patch focuses on the most common use case, which is a single item being changed. Replacing the optimization by std:stable_sort can potentially slow down the sorting performance of large data sets.
Task-number: QTBUG-113123
Pick-to: 6.5 6.6
Change-Id: Ib2bd08f21422eb7d6aeff7cdd6a91be7114ebcba
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
When constructing a QWeakPointer<T> from a rvalue QWeakPointer<X>,
even if X* is convertible to T*, actually doing the conversion
requires access to the pointee's vtable in case of virtual inheritance.
For instance:
class Base { virtual ~Base(); };
class Derived : public virtual Base {};
Now given a `Derived *ptr`, then a conversion of `ptr` to `Base *` is
implicit (it's a public base), but the compiler needs to dereference
`ptr` to find out where the Base sub-object is.
This access to the pointee requires protection, because by the time we
attempt the cast the pointee may have already been destroyed, or it's
being destroyed by another thread. Do that by going through a shared
pointer. (This matches the existing code for the converting assignment.)
This requires changing the private assign() method, used by QPointer, to
avoid going through a converting move assignment/construction, because
one can't upgrade a QWeakPointer tracking a QObject to a QSharedPointer.
Given it's the caller's responsibility to guard the lifetime of the
pointee passed into assign(), I can simply build a QWeakPointer<T> and
use ordinary (i.e. non-converting) move assignment instead.
Change-Id: I7743b334d479de7cefa6999395a33df06814c8f1
Pick-to: 6.5 6.6
Fixes: QTBUG-117483
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QAbstractItemView installs the delegate as an event filter on the
editor, so the delegate will get the focusOut event (and other
events) before the editor does. QAbstractItemDelegate will then
emit commitData, signaling that the "updated" data should be
written back to the model.
In the case where the editor of a delegate (QAbstractItemDelegate)
is a QSpinBox with keyboardTracking set to false, the value of
the spinbox won't be updated while typing, but only when the
spinbox's text edit focus is lost. In this case, the delegate's
commitData will be emitted before the spinbox has had a chance
to update the value in its handling of the focusOut event.
To fix, make sure to update the value before the data is
committed to the model in the delegate's tryFixup method.
Fixes: QTBUG-116926
Pick-to: 6.5 6.6
Change-Id: I68540964342407d23387e4404a0fe3f00d80eb5f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If a move-to-trash operation failed, e.g. because the file was opened by
another process (or QFile), then the moveToTrash function would still
return true.
MSDN documents the IFileOperation::PerformOperations to return whether
the operation succeeded, but evidently this is only a statement about
the execution of queued up operations, not a statement about any of the
operations' success.
If the operation succeeded is reported by an HRESULT parameter
of the IFileOperationProgressSink::PostDeleteItem implementation,
and we ignored that parameter so far.
Check it via the SUCCEEDED macro, and set a boolean sink variable based
on that, which we can inspect to return the correct value.
Augment the test case by opening those files we create ourselves, and
if that fails (which it will on Windows, but not necessarily on other
platforms), then try again after closing the file. If the first attempt
succeeded, then the source file must also be gone.
Pick-to: 6.6 6.5 6.2 5.15
Fixes: QTBUG-117383
Done-With: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Icb82a0c9d3b337585dded622d6656e07dee33d84
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
d026fad3d9 added converting constructors
for QPointer. This however made converting _assignments_ ambiguous,
introducing a regression for users coming from Qt < 6.6.
This code:
QPointer<Base> base;
QPointer<Derived> derived;
base = derived;
used to convert `derived` to `Derived *` (using the implicit conversion
operator from `QPointer<Derived>` to `Derived *`), and then the
assignment operator for `QPointer<Base>` that took a `Base *`.
The introduction of the conversion constructor in 6.6 makes it possible
to convert `QPointer<Derived>` to `QPointer<Base>`, and then fall back
to the compiler-generated assignment operator for `QPointer<Base>`.
The result is that the code above is now ambiguous and stops compiling.
Fix this by adding a converting assignment operator for QPointer.
I'm only adding the const-lvalue overload because the implementation
requires going through the private QWeakPointer::assign helper. We
cannot copy-assign or move-assign the inner QWeakPointer, as those
assignments require lock()ing the QWeakPointer and that's not possible
on a QObject-tracking QWeakPointer (but cf. QTBUG-117483).
Assigning from a rvalue QPointer would mean calling assign() on
the internal QWeakPointer _and_ clear the incoming QPointer,
and that's strictly worse than the lvalue overload (where we just call
assign()).
Change-Id: I33fb2a22b3d5110284d78e3d7c6cc79a5b73b67b
Pick-to: 6.6 6.6.0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Makes it easier to locate later which test may be leaking stuff.
Pick-to: 6.6
Change-Id: I9d43e5b91eb142d6945cfffd178713f869752761
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The moveToTrash tests, on XDG platforms, would be trashing to
~/.local/share/Trash. Unlike Windows and Apple systems, the XDG trash
spec creates two files and these tests weren't deleting both of them, so
we had a slow increase of left-over files in ~/.local/share/Trash/info.
Cleaning up ~/.qttest is left as an exercise for the users. For example,
$ cat ~/.config/user-tmpfiles.d/qttest.conf
#Type Path Mode User Group Age Argument
e %h/.qttest 0700 - - 1w
Pick-to: 6.6 6.5 6.2
Change-Id: I9d43e5b91eb142d6945cfffd1786aeff91d34fde
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Android APIs use integer constants like enum values, so they are mapped
to one of the integeral types (jint, jshort, jlong etc) on the C++ side.
Enable C++ code to declare an equivalent enum (scoped or unscoped), and
to use that enum as a type in JNI calls by treating it as the underlying
type in the signature() generator.
Add a helper type trait that maps enums to their underlying type and
other integral types to themselves (we can't use std::underlying_type_t
on a non-enum type). Add tests.
Note: Java Enums are special classes with fields; this change does not
add any special support for those.
Change-Id: Iec430a1553152dcf7a24209aaebbeceb1c6e38a8
Reviewed-by: Petri Virkkunen <petri.virkkunen@qt.io>
Reviewed-by: Zoltan Gera <zoltan.gera@qt.io>
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
