This commit introduces two significant changes to the meta-object
data format:
1) Meta-type information (QMetaType type/name) information is
stored directly in the meta-data for both properties and methods;
2) The original signature (string) of a method is no longer stored
in the meta-data, since it can be reconstructed from the method
name and parameter type info.
The motivation for this change is to enable direct access to method
names and type information (avoiding string-based lookup for types
if possible), since that's typically the information language
bindings (e.g. QML) need. (moc already had all the desired
information about methods, but it threw it away!)
This change keeps support for the older (6 and below) meta-object
revisions, but the support will be removed after a short grace
period.
The following public QMetaMethod functions have been added:
name() : QByteArray
returnType() : int
parameterCount() : int
parameterType(int index) : int
The following internal QMetaMethod function has been added:
getParameterTypes(int *types) : void
This commit extends the meta-method data to include explicit
type/name data for methods. The new data follows the existing
(5-word) method descriptors in the meta-data. The method descriptor
format was modified to enable this. First, the descriptor now
contains the meta-data index where the method's type/name information
can be found. Second, the descriptor contains the number of
parameters. Third, the descriptor has a reference to the name of the
method, not the full signature.
Each entry of a method's type/name array contains either the type id
(if it could be determined at meta-object definition time), or a
reference to the name of the type (so that the type id can be
resolved at runtime).
Lastly, instead of storing the method parameter names as a
comma-separated list that needs to be parsed at runtime (which was
how it was done prior to this commit), the names are now stored as
separate entries in the meta-object string table, and their indexes
are stored immediately after the method type info array. Hence,
parameter names can be queried through the public API without
parsing/allocating/copying, too.
Task-number: QTBUG-24154
Change-Id: Idb7ab81f12d4bfd658b74e18a0fce594f580cba3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
In Qt5 the meta-data format will be changed to not store the
method signature string explicitly; the signature will be
reconstructed on demand from the method name and parameter type
information.
The QMetaMethod::signature() method returns a const char pointer.
Changing the return type to QByteArray can lead to silent bugs due to
the implicit conversion to char *. Even though it's a source-
incompatible change, it's therefore better to introduce a new
function, methodSignature(), and remove the old signature().
Task-number: QTBUG-24154
Change-Id: Ib3579dedd27a3c7c8914d5f1b231947be2cf4027
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Up to and including meta-object revision 6, string data have been
stored as 0-terminated C-style strings, that were made directly
accessible as const char pointers through the public API
(QMetaMethod and friends).
This commit changes moc to generate an array of QByteArrayData
instead, and adapts the QObject kernel accordingly.
Generating an array of QByteArrayData (byte array literals)
means that the strings can now be returned from public (or private)
API as QByteArrays, rather than const char *, with zero allocation or
copying. Also, the string length is now computed at compile time
(it's part of the QByteArrayData).
This commit only changes the internal representation, and does
not affect existing public API. The actual (C) string data that the
byte array literals reference still consists of zero-terminated
strings. The benefit of having the QByteArrayData array will only
become apparent in the upcoming meta-object data format change, which
changes the format of property and method descriptors.
Support for the old meta-object string data format was kept; the
codepaths for old revisions (6 and below) will be removed in a
separate commit, once all the other meta-object changes are done and
affected code has been adapted accordingly.
Task-number: QTBUG-24154
Change-Id: I4ec3b363bbc31b8192e5d8915ef091c442c2efad
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Regenerate the moc output so that it's in sync with the latest moc.
Change-Id: I86001f88bbc0127fc26414cf6eef512cd6c71e44
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This is a convenience to make it easy for applications to simply add:
CONFIG += opengles1
To their .pro file to link against OpenGL ES 1.1 instead of OpenGL ES V2
Change-Id: I48605f5f69f83d99cfb2ad6dbb4b318d41e00128
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This allows us to create correct CMake config files when Qt is
configured with directories outside of the prefix (which Qt allows),
and also allows us to use correct values when a 'longer' relative
lib directory is used such as lib/x86_64-linux-gnu.
Change-Id: I6f88255a23752dc5b84cb20ce13fdeeee9d5ad51
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
stdint.h is a C99-ism, which isn't available everywhere. The sha.h
header tells us we need 4 typedefs. Add these to qcryptographichash.cpp
before including sha.h and comment out the stdint.h include in sha.h.
Change-Id: I1ede9569fa7eaa84de3befeb3c58cc6a05aa522c
Reviewed-by: Oliver Wolff <oliver.wolff@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
- Skip the failing windowsDefaultLocale() test.
- Improve the handling of the subprocess, locate
the binary in initTestCase instead of repeatedly searching it.
- Make all applications console/non-app bundles.
Task-number: QTBUG-24543
Change-Id: I79dfaa3320cd5698f02e74a3fe53477d4a79d4fb
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The libraries were built into wrong directory in Windows. Fixed it so
that the libraries are built into debug and release directories like
the test executable.
Also fixed QMAKE_CLEAN statement, which was using incorrect separator.
Task-number: QTBUG-24151
Change-Id: Iade656af5f83ef2b79c2b9c4177df4a16b2f6821
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This is dependent upon the following Change Id's:
I5ebcffb7153f4216d69921d4818051e6b3d14d8a
Iec065f528f5edd848be580807a607488dc2e401f
Change-Id: I234e3c4272d7474d8f8e20fc4fea20d95c829cb5
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
the earlier done topological sort already removes duplicates and only
works with lower-cased names anyway, so we can remove the overhead here.
Change-Id: I44fc39af9e94662717e1c8cfb0ddb87d2f597935
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
moc is currently generating code to convert from a pointer to member
function of a slot or signal to its index.
The idea was that it could be usefull for slots to have the new syntax
do the same as the old one (connecting signal index to slot index). But
in practice, the new syntax do not use the IndexOfMethod for slots.
Also, it does not work for all the slots (no Q_PRIVATE_SLOT,
no static slots)
So since it is not used, and that it would take room in the binaries to
generate all the code to get the index of slots, we remove it.
If ever we need it, we can still add it later.
Change-Id: Ia417e3e524d7915ca86433ea86c66ac2b299c81a
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
configure was unconditionally attempting to create two symlinks to
qconfig.h: include/Qt/qconfig.h, and include/QtCore/qconfig.h.
include/Qt doesn't exist any more, so this would always cause a
"No such file or directory" warning. Remove that one.
include/QtCore/qconfig.h is usually created by syncqt now, so this would
cause a "File exists" warning. Make that one conditional.
Change-Id: I8c6244dcbcf9765444f0d5c40c91a0ca192ecbcb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Commit 4dabe78387 changed
these functions from virtuals to inlines that check the
return value of the remaining virtual function nodeType().
However, two of the functions call nodeType() more than
once, which we know will return the same result each time,
but requires a compiler with interprocedural optimization
capabilities to figure out by itself.
So instead of repeatedly calling nodeType(), call it once
and store its return value in a temporary, and use the
temp for further comparisions.
Change-Id: Idbeafb7fd93d275d475218c6df2ad7fdc9162cc5
Reviewed-by: Richard J. Moore <rich@kde.org>
this is way more predictable than resolving it later.
Change-Id: I0ce27977b795bde9235e1d51d6f2d0d917f2398c
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is a one-time operation which depends only on the invocation, so
this new home is much more appropriate.
Change-Id: I11ef30a8227afed06e58e64e65809dba25e81567
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it's generally redundant with DataPath which we already look into.
this is consistent with where mkspecs are looked for.
i don't think anyone will notice this "loss" ...
Change-Id: Iab7c35cc22ba53e1005f26b5d85d41cf4dafad07
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
no point in saving the context when we are not actually modifying the
current context.
Change-Id: Id6f51a163e86bdf402aa0713737b655db68e7ee8
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
The Windows registry and INI files use case-insensitive key.
This is a side effect of 1d01bc1e83
Task-number: QTBUG-24145
Change-Id: I862bddae68ef27569e6ffa901f98ca107d3f300b
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The code in submitAll() had the same goal as the code in select,
so it has been unified. The new code in select() avoids sending lots
of dataChanged() signals for rows that are going to be removed
by QSqlQueryModel anyway.
Change-Id: Ic22e038223720185e47ed0cc573147745ecc8fc9
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
The output of building and running config.tests are generally silent
unless -verbose is passed to configure.
However, there was one place in endian.test where a check for $VERBOSE
was missed, leading to confusing output like:
Creating qmake. Please wait...
rm -f endiantest.o
rm -f *~ core *.core
rm -f endiantest
rm -f Makefile
rm -f endiantest.o
rm -f *~ core *.core
rm -f endiantest
rm -f Makefile
Change-Id: Idabe85f2b188ed9da713392d116d4d2853be2189
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Previously the silent logging mode suppressed passes, skips and internal
testlib info messages, but did not suppress debugging output, making it
hard to see the fails in a noisy test. This commit changes silent mode
so that it suppresses all output except test failures and fatal errors,
making silent mode truly useful for seeing just the important test
output.
This commit also adds a selftest to verify the behaviour of silent mode.
Change-Id: I75420aead03682306210746a87e2a3b608b58fc6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Since we're not yet confident if they serve their purpose well enough,
we have decided to make them internal so that we are free to tune them
later
Change-Id: Id79d154e0537aca07303afea5d057cfcb0773384
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
When an OpenGL Core Profile context is requested the function
glGetStringi() is used to query the supported extensions as
glGetString(GL_EXTENSIONS) has been removed in the core profile.
The signature for glGetStringi used in Qt missed off the APIENTRY calling
convention. This results in stack corruption on windows each time
glGetStringi() is called leading to a crash.
Change-Id: Iff62c42e2bb5fc4a5c0561fae97ddc5a8ae3a45e
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
The plugin might advertize more keys than supported at runtime. E.g.
the directfbegl key might not be available. I would like to have a
directfb.json.in and then generate the right file or if moc would
pre-process the file...
Change-Id: Ia8ad4e1367c06f5e35d02822d4f830ce1e9dc577
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
This adds Sha224, Sha256, Sha384, and Sha512 enum values to
QCryptographicHash::Algorithm. The implementation comes from RFC 6234,
http://tools.ietf.org/html/rfc6234, which is added to
src/3rdparty/rfc6234. Only the headers and SHA-2 code is included in
src/3rdparty/rfc6234 (the SHA1, HMAC, and HKDF code is not included).
Change-Id: I85139fd118291f15efc22899a5ddd1cc83810cfb
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Note: UNICODE_ACCEL is Qt3 compatibility and is equal to 0
Change-Id: I808a66772abceb3822d515d69386728264eb1b40
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This is an improvement to a previous fix with
SHA e62e71162606fec134600955a89b7e0c34a7840b
We actually never want to call resizeSections if the parent is hidden.
Therefore we can both simplify and improve the code with this patch.
When we do show/hide on parent then the visible status is updated
before we get into this code. I have verified the patch on the code
from:
Task-number: QTBUG-14234
Change-Id: If7bfa3b3813c97b4a545e48423526e9cfe118de4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Instead of relying to complex preprocessor expression that need to be
maintained to be kept the same as in qglobal.h
This aslo fix the case where QT_COORD_TYPE is defined (It is meant to be
defined to float or double, any other type would not make sense)
So now there should hopefully be only one place to change if one need to
adjust the type of qreal
Change-Id: I778312112603173562dbe675ab491b53d6cd2174
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Submenus are now positioned to the correct side of the parent menu
based on layout direction, if there is enough space on screen to fit
the menu. If there is insufficient space, then the menu is positioned
to the other side of the parent menu. In case that also causes submenu
to be partially ofscreen (very wide menu relative to the screen),
then the submenu will be aligned with the screen edge and will overlap
the parent menu. This seems like a lesser evil compared to having
submenu partially offscreen, which could obscure important details
such as checkmarks.
Task-number: QTBUG-23568
Change-Id: I6a9ab2c232713a2ee5a6dde3227c40419d46bd3d
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
After commit e0acf65043, configure.exe
built with the x64 compiler could detect the same compiler twice,
breaking the -platform detection even when only one compiler is in the
path. Fix this by taking advantage of the CompilerInfo struct ordering
and ignore detection of the same compiler.
Change-Id: I583230520d2e0859196f9d7c8af31adbb981a6ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
it did the same cleanup() did, and they are always called consecutively
anyway (except at start and end where it does not matter).
Change-Id: I4c82024d19d6c670f1f4037d43147a15680614ae
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
we want to call it even if the test fails
Change-Id: Ie8f3f9d2df5d52990d6b9f9a632e49826278175a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this allows us to temporarily set some extra args without (incorrectly)
instantiating a second TestCompiler (and on the way relying on $PATH for
finding qmake).
Change-Id: Icce5bf7314148ddbe705606f77a26e3362b31f67
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it's rather pointless to first query the variable's presence in the
file. instead, just fetch it and see what is in there.
for this to work cleanly we defer the concatenation of the filename.
Change-Id: I322db8ae897272fae049074d8b7676787286aedd
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Clear away Q_WS_WIN/Q_WS_X11 from QMenu. Using the hint returned by the
QPlatformTheme.
Task-number: QTBUG-24325
Change-Id: Iaa4da26c74273d7cfc1fbec6519c52d09e10f7bb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
tst_qclipboard.cpp still has Q_WS_WIN which must be clear away. After
clean up, auto test will fail under windows: When setMimeData() is
called, dataChanged() signal will be emited twice.
The solution for QTBUG-24184 has partially solved the problem, but it
still there. Make sure emitChanged() only called by QPlatformClipboard
will give our more control for this.
Task-number: QTBUG-24484
Change-Id: I23566c6d3b32828b6865234c311af3635fe9e299
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
