Fix a typo and swap two sentences to give a clearer reading.
Pick-to: 6.2
Change-Id: I4a24ad5ba2e022edd121eb686de3638af2c242a6
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
If the local time for which we want data is after the last known
transition, the two transitions we get to bracket it are the last
known and an invalid one. The code checked the former was valid, but
neglected to check the latter, leading to nonsense arithmetic later in
the function. In this situation we unequivocally want the last known
transition, so the problem is easily solved.
Fixes: QTBUG-96152
Pick-to: 6.2 6.1 5.15 5.12
Change-Id: I6fc830ce538e8a572093cd8dfe832e10689bf904
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If only to make the exceptions stand out, so we can see which ones
only exist for their side-effects.
Change-Id: I90b649d4da09f57ab986f29c577993dd12e34721
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code in qEnvironmentVariableIntValue() to parse the text as an int
can now delegate it to QByteArrayView, so that keeping in sync with
QByteArray::toInt(), as a comment requested, is now automatic.
Change-Id: I09a6b7245ecd02f39a850a4ce187f86709282e8c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The testcase was disabled with no explanation in
2766322de3 but seems to work fine.
Change-Id: Ibc22a4ffb756604e22c1f2cf1165919c1d7f1212
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When inserting between two nodes the "previous" node's "newer" was
forgotten and not updated. So every node's "newer" would point to the
"newest" node.
Change-Id: I5b0df8812be5f7f62b3ae363e4c78f582e0e5c43
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The original code checks the existence of an ellipsis character first.If
this does not exist (glyph == 0,which is an invalid glyph index), then
it falls back to looking up '.'. But in the Tibetan environment,the
glyphIndex('.') also returns 0, so that it simply doesn't add any form
of "...", and cuts the text instead.
If both the attempts at getting something from the main font fails,
we can do a third pass on the "multi" font engine.
Fixes: QTBUG-95942
Pick-to: 6.1 6.2
Done-with: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Change-Id: I251de3fe92e19be0462c58c2059ecf7d354bfbb0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Using function instead of macro prevented the wrappers from being able
to pass back any variables set in the wrapped function. In some cases,
these variables were being explicitly passed back to the caller, but
that isn't needed if you just make each wrapper a macro. This also
makes things more future-proof because any newly introduced output
variables will work without having to update the wrappers.
Task-number: QTBUG-96121
Pick-to: 6.2
Change-Id: Ic4486de668694c06b47e466587b2cdcb969ea047
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When linked to OpenSSL, qt.tlsbackend.ossl will log.
Change-Id: I6f0e3c3e6af73b29cff93b8efe39933e5b36d493
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This reverts commit 1ecf2212fa.
The fix is not correct after all. TouchBegin goes to the correct
widget with the fix, but following TouchUpdate and TouchEnd events
now go to the viewport, as QApplication::translateRawTouchEvent always
gives precedence to the widget that Qt recorded to be the touch
grabber, which is the viewport. This results in infinite recursion,
as the proxy widget trying to send the touch events to the embedded
widget (expecting that translateRawTouchEvent will split it up) ends
up sending the events back to the viewport.
Leave the added test case as QEXPECT_FAIL, reactivate the (never run,
hence unnoticed) test that the fix broke.
Pick-to: 6.2 6.1
Task-number: QTBUG-45737
Task-number: QTBUG-67819
Change-Id: I4810affb3cd066743ae94ab7beb2f0c06b60d211
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Enable building and uploading test artefacts for all modules in case
tests are enabled.
Pick-to: 6.2
Task-number: QTBUG-88846
Change-Id: I30832820dea348187b517e170fa1c5266db85604
Reviewed-by: Toni Saario <toni.saario@qt.io>
Make file names match CMake's test names (and those follow dir-name)
and class names follow tst_ClassName pattern when testing
ClassName. Purge comments about the qmake configs the CMakeLists.txt
are generated from. Purge empty constructors and init/cleanup methods
of classes. Fix petty coding style violations.
Add qdir/tree/, qurl, qbench and qset benchmarks to their parent directories'
lists of subdirs. Fix unused return error from qurl benchmark.
Change-Id: Ifc15a3a46e71cf82ad0637753517e0df34049763
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Decrementing decDigits and checking for zero is less complicated than
incrementing a counter to check against it if it's not negative.
A plethora of unenlightening local variables could be replaced by
keeping track of the last character and of a simple state variable
that make checks easier to understand (and explain).
Various conditions could be expressed more simply.
Comment on the condition for omitting grouping characters from the
transcript - it was easy to mistake the comma for a dot !
Comment on the lack of checking of grouping sizes.
Change-Id: Iff8da2376507d2abbbaf5739baf6cbb23e55edaf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The test case was previously disabled, so tests were added to the
QGraphicsView test instead. With the QGraphicsProxyWidget test active
again, move the test cases where they belong.
Amends 1ecf2212fa,
01aeb5f7e4, and
06235d36ae
Pick-to: 6.2
Change-Id: I208b8a418653cf0640c2e7c9f716fa69538ad7e9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
They were de-facto disabled in the qmake build system, and didn't make
it into the cmake build system either. The dependency to the fusion
style is not a build-time dependency since the test uses the
QStyleFactory to create the style, and if that fails, tests can be
skipped at runtime.
As a consequence of not being executed in CI for a long time, many
tests failed. Also, many tests were commented out or skipped as
broken, ambivalent, or nonsensical. Remove that dead code. The
QGraphicsWidget::initialShow test doesn't test anything that initialShow2
doesn't test, but makes incorrect assumptions, so remove it and rename
initialShow2 to initialShow.
Failing tests frequently left QWidget objects undeleted, causing all
subsequent tests to fails as well. Fix that with std::unique_ptr.
Some tests are still unstable and fail on some platforms, handle that
using QEXPECT_FAIL. The forwardTouchEvent test fails due to a bug
in Qt introduced recently. Skipping it for now.
Pick-to: 6.2
Change-Id: I405122ea9d4d150bd1d505d40b83fe39604de0f9
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Now that we don't need '\0'-termination on the data, this is possible.
Moved QByteArray's tests to tst_QByteArrayApiSymmetry and added some
more test-cases.
[ChangeLog][QtCore][QByteArrayView] Added numeric parsing methods.
Change-Id: Ic0df91ecfe5dbf6f008d344dd0464d7927f32273
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Converting a negative signed value to its absolute value in the
matching unsigned type can be done by adding one, negating (which we
can now do without the UB), casting and then adding one again.
This is cleaner than casting the negative value to the unsigned type
in order to then "negate" it within that type, about which MSVC
grumbles; we can now avoid the need to suppress that grumble.
Change-Id: I9148ead23c928aeb2b90884a2f2e292fdf3af5e3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
All callers are now converted to use qstrntou?ll().
Change-Id: I279a800a9f19944e544cc8a7ebaba579d18643b3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Change it to take a QByteArrayView instead of a plain char *; all its
callers do know the size and propagating it enables the implementation
to call strntou?ll() rather than strtou?ll(), thereby escaping the
need for '\0'-termination.
Fixes: QTBUG-74286
Change-Id: Ie9394786e9fcf25c1d1be2421805f47c018d13bb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Where size is known or can readily be determined.
Change-Id: I442e7ebb3757fdbf7d021a15e19aeba533b590a5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove third-party code in favor of STL. Implement (for now)
strtou?ll() as inlines on strntou?ll() calling strlen() for the size
parameter. (This is not entirely safe, as a string lacking
'\0'-termination but with at least some non-matching text after the
numeric portion would formerly be parsed just fine, but would now
produce a crash. However, strtou?ll() are internal and callers should
be ensuring '\0'-termination.)
Task-number: QTBUG-74286
Change-Id: I0c8ca7d4f6110367e93b4c0164854a82c5a545e1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It turns out that we need to support two ways to pass cmake args as
Conan options. Those that are meant for qtbase only,
like "-DCMAKE_TOOLCHAIN_FILE={{.Env.ANDROID_NDK_ROOT}}", and those
that are meant for leaf modules only.
Rename the current 'extra_cmake_args' Conan recipe option as
'cmake_args_qtbase' to make it clear these cmake args are passed
to qtbase build only.
The leaf modules will be using 'cmake_args_leaf_module' as the
Conan option name.
Pick-to: 6.2
Change-Id: I456b8b07da5684f386cac668a5cd3e2509c733ac
Reviewed-by: Toni Saario <toni.saario@qt.io>
Some Qt modules/tests go through features that require run-time
Android permissions which are granted by user input, that of
course is not ideally possible while running unit tests. So when
installing the app adb can do that for us.
Pick-to: 6.2
Change-Id: I92d33d5213c3779d7ca246ec0fb359d2ead4fa6f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The substring range refers to the entire text of the focus object,
not just the selection.
As there is no way to pull out the entire text via input method queries
we do the best we can via ImTextBeforeCursor and ImTextAfterCursor.
Returning the correct substring enables input method features such
as backtracking into already committed text with the Hiragana IM,
as well as the Keyboard Viewer's 'Current Text' toolbar.
Pick-to: 6.2
Change-Id: I53286ef1e8e7c5fba37858dda7317ae74d95b528
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When input methods are enabled for the focus object we send key events
through interpretKeyEvents, which will involve the input method in the
key event processing. The input method will get back to us with callbacks
such as insertText, setMarkedText, or doCommandBySelector.
In the case of insertText, when the inserted text matches the originating
key event's text, we opt to not send the text as an QInputMethodEvent,
and instead fall back to sending it as a normal QKeyEvent. The reason
for this is that Qt's IM protocol was designed to handle composited
text, so sending non-composited (but IM-initiated) text input as IM
events is unexpected (see 2d05d3bd28).
However, we cannot assume that the input method will always call us
back with one of the above mentioned methods. The input method can
very well eat the event as part of its own operation. This happens
for example when pressing and holding 'a' in a US English keyboard
layout, which will pop up an input panel for the various accents
available. Or it may happen when using the AquaSKK third party IM,
which uses the 'l' key to switch the input mode to latin without
producing any characters.
To allow these input methods the freedom to control the processing
of key events we need to reverse the logic for when we send key
events as QKeyEvent. We now assume that the IM will handle the
event, and only trigger QKeyEvent in two cases where we explicitly
were called back by the IM, but decided that a QKeyEvent is needed:
- If the IM calls insertText and we consider the text simple text
- If the IM calls doCommandBySelector and we can't find a matching
selector for the command. We only implement insertNewline and
cancel, so in all other cases we want to pass on the key event
to let the focus object handle it, for example for 'Select All'
and similar key combinations.
Fixes: QTBUG-46300
Fixes: QTBUG-71394
Pick-to: 6.2
Inspired-by: Vladimir Belyavsky
Change-Id: I9a73a8e1baa2ebe0c5df1166a9ec3d9843632bb1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The function was never called. As a consequence receiverQueue was
only ever read and never written.
Change-Id: I30905446452d9f263124d3af08c42e2e1b0cafbe
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Amends 53496e67f0:
- move flags() out of the QT_DEPRECATED_SINCE block in the header
- add QT_DEPRECATED_SINCE block around source() implementation
Pick-to: 6.1 6.2
Change-Id: Id52fa6b04a13efbede3e6ac440060f90b283e773
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
So include that; and sort the includes while I'm about it.
Change-Id: I0f922f7883f1e32b8bbcf555617588fa9cfacaaa
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Retain the given month number and simply subtract one from it in the
one place it's used (once the two array dereferencs are unified). That
makes it clear that the off-by-one numbering is just down to our
arrays, not some weired quirk of the MS API. Simplify a condition by
inverting it: compare to LongFormat instead of ||-ing comparisons to
the other two members of the enum.
Change-Id: Ia03486b7869255ecdb1372de62d5c745d35d0a0a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
By the time of Qt 6.2 release all new apps targeting Play store must
target API level 30 (Android 11) or above (starting in 08/2021 for
new apps and 11/2021 for existing apps' updates).
Pick-to: 6.2 5.15
Task-number: QTBUG-94451
Change-Id: Id7fa2fd62899a7259e365c917292c6c3ac0d2b0d
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Include counting of test types, to catch two more cases where totals
don't add up.
Task-number: QTBUG-95661
Change-Id: I9fe5424bc6652c61a065bf2889333e2ed9437c81
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Count how many we expect to pass, fail and be skipped, so we can
report that for comparison with the actual totals line: this reveals
some double-counting, marked with a FIXME.
Task-number: QTBUG-95661
Change-Id: I8b0f13ded5202ed476d8abfee70ed60f9e639bf9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This reverts commit 904617dfb8 and makes
clear to future readers why that wouldn't be a sensible change.
Update the test's data, eliminating a case of duplicate counting that
was caused by the reverted commit.
Task-number: QTBUG-95661
Pick-to: 5.12 5.15 6.1 6.2
Change-Id: Ice6d3ab06ca171e0d6eb0fac757f1ab774e229f0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The input method may include already committed text when marking text,
in which case the replacement range reflects the position and length
of the existing text.
We handle this the same way we do replacement ranges in insertText.
Pick-to: 6.2
Change-Id: I148e4701318a59c7e0d9441d157199d7c8606f43
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Depending on the input method, pressing enter may result in simply
dismissing the input method editor, without confirming the composition.
For example with Hiragana, pressing 'a', then 'Tab', and then 'Enter'.
In other cases it may confirm the composition as well, for example
with Hiragana, pressing 'a' and then 'Enter'.
And in some cases the IME will produce an explicit new line, for
example with US English, pressing '~' and then 'Enter', or with
2-Set Korean, pressing 'a', then 'j', and then 'Enter'.
Semantically, the input method has then asked us to insert a newline,
and we should probably do so via an QInputMethodEvent, either directly
or via [self insertText:@"\r"]. This is also how NSTextView handles
the command. But, if we did, we would bypass all the code in Qt (and
clients) that assume that pressing the return key results in a key
event, for example the QLineEdit::returnPressed logic.
To ensure that clients will still see the Qt::Key_Return key event,
we send it as a normal key event. But, we can not fall back to
handleKeyEvent for this, as the original key event may have text
that reflects the combination of the inserted text and the newline,
e.g. "~\r". We have already inserted the composition, so we need to
follow up with a single newline event.
Task-number: QTBUG-39125
Pick-to: 6.2
Change-Id: If1e95687e6d5b06011692175a325f457b0b8a72f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This allows us to share code between handleKeyEvent: and flagsChanged:
for parsing the incoming NSEvent, and allows for sending key events
from other call sites in the future without duplicating the parsing
and sending logic.
Pick-to: 6.2
Change-Id: Ic63f740523496a9432e439663a20f78b5bc234c5
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The code paths after accepting a shortcut event can never be hit.
Pick-to: 6.2
Change-Id: Ida77417adb8fcfd25a4b20c4eb86056b3769f014
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Rewrite the regex to not capture the things we ignore anyway.
Use capturedView to avoid allocating a string just to turn it into an
int.
Fix a (usually) ifdef-ed out piece of code that was still calling
a QRegExp function.
Make the QRegularExpression static const to save it from having to
recompile every time.
Change-Id: I2f4841a2bc35df4e6cea44aec72432410583f770
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Take the screen from the window, if the window was specified.
When it comes to Qt Quick, this is in fact required in order to
make the behavior on par with Qt 5, see
https://code.qt.io/cgit/qt/qtdeclarative.git/tree/src/quick/scenegraph/qsgthreadedrenderloop.cpp?h=5.15#n1336
try to mirror that in Qt 6 as well. There are still subtle differences
between Qt 5 and Qt 6 in particular when qt_gl_global_share_context is
set (do we set the screen from that or from the window?), for now leave
that question unsettled.
What exactly setting the screen on the context does is platform
specific, and can become relevant with multi screen, multi GPU
systems.
Pick-to: 6.2
Change-Id: Icc90b8fea87bf1e34ecf1dec0702f4d3c411db00
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Before, we would just issue a warning which is likely to get overlooked
in CMake's output. Also, the configure summary would report "Using
ccache ... yes" but CMAKE_<LANG>_COMPILER_LAUNCHER stays unset, which is
inconsistent.
Make QT_USE_CCACHE=ON and missing ccache a hard error.
Task-number: QTBUG-88308
Change-Id: Iddc7f3a91428fd96ad0defbb1ca72bd46a90aa98
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The -static argument we used before is supported by ld, but not lld.
The latter requires --static or -Bstatic. Use -Bstatic, which is
supported by both.
Pick-to: 6.2
Fixes: QTBUG-89549
Change-Id: I3c3069661bf4cd20e3298aff4714163b7419d3ef
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The connect() documentation makes it clear that UniqueConnection does
not work with free functions / function objects and the like; only with
actual PMFs. Rather than silently *ignoring* the flag, be vocal about its
presence by warning, and make the connection fail (as the user has
passed an illegal argument).
[ChangeLog][QtCore][QObject] QObject::connect() now will refuse to
connect a signal to a free function / function object if UniqueConnection
is passed. Note that UniqueConnection has never worked for such
connections -- the flag was simply ignored, and they were established
multiple times. Now, the flag is not ignored and results in a connection
failure (as well as a runtime warning by Qt).
Change-Id: I6509667018c74f9bd24910cde0a1b16c5f84f064
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code in 188d739400 uses a connect() to
a lambda, passing UniqueConnection to avoid establishing the connection
more than once. The problem is that UniqueConnection does not work
with lambdas; it works only with "regular" PMFs to QObject subclasses.
Re-do the same fix, but without a connection: use the checkStateSet()
virtual from the base class that will notify us if setChecked() is
being called on the tool button, and from there synchronize the state
of the default action.
Change-Id: Id512812c562cd6d20bc1a489753b33c269919d32
Fixes: QTBUG-95255
Pick-to: 6.2 6.1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
