Add a couple of previously excluded lines of code that should work for
all platforms.
Change-Id: I5f0b5365060a91cb708a3143b28f7de703fc419e
Reviewed-on: http://codereview.qt-project.org/6196
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed warnings just repeat information that is already in the
QSKIP's that immediately follow the warnings.
Change-Id: Id13158487e8075aab8a8f48955303edde3f4af63
Reviewed-on: http://codereview.qt-project.org/6194
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Q_CHECK_PAINTEVENTS was guaranteed to be defined prior to the code that
was conditional on it being undefined.
Change-Id: I8b48a2c6bff997de7d0e3f640203308718dd865b
Reviewed-on: http://codereview.qt-project.org/6193
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Calling qFatal may result in test output not being well-formed.
Change-Id: Ia16bade4d3311485c6ba4dd23d5624d18b192b71
Reviewed-on: http://codereview.qt-project.org/6190
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QSKIP already causes the test function that calls it to return, so the
returns removed by this commit were unreachable.
Change-Id: I1fa2f3a3271927d8a600b02d8b31bd81db9146b1
Reviewed-on: http://codereview.qt-project.org/6188
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I95feba3edbfa092c0ef4d85bb8c6877bd6be698e
Reviewed-on: http://codereview.qt-project.org/6128
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
On Unix the table1 interface was replaced by the table2 interface, while
table1 is still used on other platforms. This commit changes the test
so that only the applicable test functions are built and run, where
previously both sets of tests were built and one set would always skip.
Change-Id: I5a785fb88fcbf4e5896e1fdb80c7c0a659597e34
Reviewed-on: http://codereview.qt-project.org/6097
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is so that the results of LayoutTests in WebKit are
more in line with what things were like in Qt 4.8.
Change-Id: I25962e03bd8e0316cb303c0d94c25ac4e73ea9a8
Reviewed-on: http://codereview.qt-project.org/6162
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
according to the Unicode specs, code point U+0085 should be treated
like a white space character (an exceptional Cc one)
Change-Id: Ib17ae0c4d3cdafe667cafa38b645138ef24c238c
Merge-request: 32
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Reviewed-on: http://codereview.qt-project.org/6158
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
There were two fixes in 4.8 which each fixed a part of the problem.
Comparing canonical paths is more correct, but is only possible where
both directories exist. If neither directory exists, then compare
absolute paths instead.
Changed a regression test, because /tmp is a symbolic link on MacOS.
I.E. "/tmp/.." is canonically "/private" and not "/" as expected.
Task-Number: QTBUG-20495
Reviewed-By: joao
(cherry-picked from ad35d25e78c8252a72108a4ba931934047c4707e)
Change-Id: Ia4986e8337f0e512e1a3398a5a4dd36e62680b9c
Reviewed-on: http://codereview.qt-project.org/5813
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This is in order to have a regression test for QT-5304.
However the test is also checking basic functionality of head
requests too.
Task-Number: QT-5304
Change-Id: I0d98bd1f1125ffd49d9f3c859a51b2aaee95379a
Reviewed-By: Martin Petersson
Reviewed-on: http://codereview.qt-project.org/6033
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
We can't rely on absolute paths when comparing directories for equality
as these don't take into account symbolic links and may also bypass ../
and ./ simplification.
Instead, canonical paths must be computed and can then be compared
according to the case sensitivity rules for the platform or file engine,
as is done in QFileInfo.
Task-number: QTBUG-20495
Reviewed-by: Prasanth Ullattil
(cherry-picked from dcee6e1371d899eb79717b8e3f3eec08b765db82)
Change-Id: Ib5f2a6ee11311c55782ea5dd0e9c3b45f9231686
Reviewed-on: http://codereview.qt-project.org/5812
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The QSKIP is only reachable on Mac, so only compile it for Mac.
Change-Id: I268e87829e01755051f81cdaf856d936b04b3d49
Reviewed-on: http://codereview.qt-project.org/6091
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QTestLib already makes a superior version of this functionality
available to all tests, without the need to recompile. Each qtestlib
test program can be passed, via the command line, a list of test
functions and test data tags to be executed instead of executing all
test functions.
Change-Id: I1b54fc70a0c58a17209817afabfb953b5748dac4
Reviewed-on: http://codereview.qt-project.org/6015
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Omit focusColors test function at compile-time in preference to
skipping at run-time. Also removed commented out code.
Change-Id: Ib8955656f5a43b30df95b4c9865e52902dbd6b1e
Reviewed-on: http://codereview.qt-project.org/6010
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Remove empty constructor/destructor. Remove dropDownDeleted test
function which has been entirely skipped since before Qt 4.0, is
obviously incomplete (it attempts to use a QComboBox that does not
exist) and provides no statement of intention that might allow the
incompleteness to be addressed.
Change-Id: I4975b6d5a5dde1e58dab1dd393be92eddeb4c9f8
Reviewed-on: http://codereview.qt-project.org/6009
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The test was a no-op on Mac OS. It's better to avoid building or running
it on Mac OS, rather than spending time compiling and running a test
that does nothing on that platform.
Change-Id: I4aa579036788e404f8a6a8f1a80acd32338fb3cd
Reviewed-on: http://codereview.qt-project.org/5958
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This also uncovered a missing implementation of child for
dock widgets.
Change-Id: Iac4c5a51d4626769af11b277a9a345e1e31dc490
Reviewed-on: http://codereview.qt-project.org/5987
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
The operator tested by this function (QMatrix * QRect) has not existed
since Qt 2.x.
Change-Id: Id09154de2bdda70c0fe342fe78b82709953e2b56
Reviewed-on: http://codereview.qt-project.org/5965
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The test was being skipped one test function at a time on IRIX. It's
better to avoid building or running it, rather than spending time
running a test that does nothing on that platform.
This commit also turns a silent skip on other platforms into an explicit
QSKIP to make it more obvious that there's an unfixed TODO there.
Change-Id: I7cae4f0f2eaebf5977a781b2ce15d1e71ef13b36
Reviewed-on: http://codereview.qt-project.org/5957
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The unprintablenames test was designed to prevent an old failure in
QDir from returning, but the test can't be run reliably on some
file-systems and certainly isn't going to achieve its goal when it's
commented out.
Change-Id: Ib4cb965d59c291ab2436130b87e865ac21b9b483
Reviewed-on: http://codereview.qt-project.org/5956
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Renamed QGuiApplication::activeWindow() to
QGuiApplication::focusWindow(), implemented QWindow::isActive() as a
style hint, and added focus in / out events.
Change-Id: I71866e76c5a817def3e17bcc20a4fc32081a0e7a
Reviewed-on: http://codereview.qt-project.org/5811
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I582732e3dd657df834f9a98fd52d7ee368f2f29b
Reviewed-on: http://codereview.qt-project.org/5946
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: Ib2025339422749cf216e87ac414a3056250bf8f9
Reviewed-on: http://codereview.qt-project.org/5942
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Functions that modify the d-pointer must detach or otherwise take
measures to not modify the const, read-only shared_null.
The setSharable(bool) function takes care to detach when setting
sharable to false, but should avoid setting the sharable data member
unless d is not the shared null.
Similarly, QMap<Key, T>::setInsertInOrder() needs to detach if it is
shared with the shared_null (the logic has been updated to be the same
as setSharable()).
Change-Id: Ida5cb9818b86695f1b9f0264418b955c56424898
Reviewed-on: http://codereview.qt-project.org/5929
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I21664d8d92b27c26c64789fc08d0ec7b8988456a
Reviewed-on: http://codereview.qt-project.org/5941
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QPixmapCache has until now refused to throw out shared pixmaps, i.e.
ones that still have shallow copies lying around. This leads to problems
when someone inserts two shallow copies using different keys, causing
the cache itself containing multiple shallow copies and thus forever
refusing to throw out those entries.
It's rather easy for this to accidentally happen in a user application
since QPixmap::load() or QPixmap(const QString &fileName, ...)
automatically cache the pixmap in the QPixmapCache, thus if the user
then calls QPixmapCache::insert() on the same pixmap or a shallow copy
it is locked in the QPixmapCache forever.
The only reason for not throwing out a pixmap that's shared would be to
prevent re-loading a pixmap from file when a user has a direct reference
to it in his application, but in that case the user is unlikely to
re-load the pixmap from file in any case. Therefore it seems the best
fix is to get rid of this limitation.
Task-number: QTBUG-21359
Reviewed-by: John Brooks
Reviewed-by: Olivier Goffart
(cherry picked from commit 7ab0bed3a56d46c386e65abc381264c57137cb43)
Change-Id: I46dce19227e19a25e0287cf7372177430da15a66
Reviewed-on: http://codereview.qt-project.org/4563
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
Most of these changes are search-and-replace of d->ref ==, d->ref !=
and d->ref =.
The QBasicAtomicPointer in QObjectPrivate::Connection didn't need to
be basic, so I made it QAtomicPointer.
Change-Id: Ie3271abd1728af599f9ab17c6f4868e475f17bb6
Reviewed-on: http://codereview.qt-project.org/5030
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This test was fixed by 1cc70b92c8
Change-Id: If6fa3724f7c31e952ebff1dd27fea1a1e4635a85
Reviewed-on: http://codereview.qt-project.org/5783
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jo Asplin <jo.asplin@nokia.com>
This test was fixed by db3418c10b
Task-number: QTBUG-21125
Change-Id: I1bc549353f16c0df2b6c33533298b302fcc4d4ed
Reviewed-on: http://codereview.qt-project.org/5877
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I31e069f5476f8adf9851e94b33c6afac4394b88e
Reviewed-on: http://codereview.qt-project.org/5824
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Moved most stuff to gui\accessible
* Moved widget-specific stuff to widgets\accessible
* Moved platform-specific code to either the bridge plugin (this was already the case)
or to the platform plugin.
* Added several classes and functions. These have not yet gone through an API
review. The plan is to do that in a later commit.
Classes:
- QPlatformAccessibility
- QWindowsAccessibility
Functions:
- QWindow *QAccessibleInterface::window();
- QPlatformAccessibility *QPlatformIntegration::accessibility()
* The bridge code can now either be a plugin or integrated into the platform plugin
* Mac accessibility is left out for now. Unix "should still work" (tm). These platforms
should be fixed soon.
Change-Id: Ib49ffa73b647ee0af90864544c2769440157f562
Reviewed-on: http://codereview.qt-project.org/5330
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
This function was deprecated in Qt4 and has
been replaced by isNavigationBarVisible.
Same for the setter.
Change-Id: Ifdcbaa2db0d4d8d475d959a6409347fa19d443a9
Reviewed-on: http://codereview.qt-project.org/5788
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dietrich-de@nokia.com>
QWidget is not in QtGui anymore, this broke the
test. Simply use QWindow instead.
Change-Id: Ic0176410f08b10771b663aa3ecd70295c124b662
Reviewed-on: http://codereview.qt-project.org/5757
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Symbian is not a supported platform for Qt5, so this code is no longer
required.
Change-Id: I1172e6a42d518490e63e9599bf10579df08259aa
Reviewed-on: http://codereview.qt-project.org/5657
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
No surprises, QTemporaryFile("tempXXXXXX") fails. But that is
consistent with QFile::open, and it's documented, so ok.
Change-Id: I04c805a242aeda8327d25be238da6120b3c90f5a
Merge-request: 57
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-on: http://codereview.qt-project.org/5714
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
QInputContext is migrated to QInputPanel, which allows only one
instance.
Change-Id: I4912164790d5a6bdff41e11cbe4bc4e2f9f111ec
Reviewed-on: http://codereview.qt-project.org/5641
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This change makes QTest::qWarn() consistent with similar testlib
functions, which take __FILE__ and __LINE__.
Change-Id: I12977cb30672899ab38877b4a656f0cc0c7ea02c
Reviewed-on: http://codereview.qt-project.org/3559
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Before the text edit tried to represent each line of text as a child
of itself. With the editable text interface this is no longer needed.
Change-Id: If9927e522f955e863e91fd0a529a1ce6fafaddc3
Reviewed-on: http://codereview.qt-project.org/5624
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
This adds the value interface and removes the children of the dial.
Change-Id: I47eac77c01dce36db077f553054ef37353242f77
Reviewed-on: http://codereview.qt-project.org/4821
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
The selftests already used the @INSERT_QT_VERSION_HERE@ placeholder
in place of the real Qt and QTestlib versions in the expected test
output of the subtests. For unknown reasons, the same was not true for
the expected plain text output. In the past, this has caused Release
Managers to waste time incrementing the version numbers in these files.
Change-Id: I52f7870486fce128c04d53ff06978afa947474fd
Reviewed-on: http://codereview.qt-project.org/5375
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
There is no test with a datatag "float", so this code is never executed.
Change-Id: I9dd234e6575eb1c33075705edf77eb1d977061c9
Reviewed-on: http://codereview.qt-project.org/5362
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Q_ASSERT uses __FILE__, which has undefined contents, and thus the
selftest cannot always match Q_ASSERT messages in actual output with
those in expected output. The test was calling QEXPECT_FAIL() in this
case, but doing so implies that (a) it's a failure and (b) we intend to
fix it one day. Neither of these is true, so instead we should simply
tolerate this difference in actual and expected outputs, in the same way
that we do in a couple of other similar cases.
Change-Id: I8b8609a400e9b798936875f6eb1ca18a83660efc
Reviewed-on: http://codereview.qt-project.org/5358
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These functions should not take care not to unconditionally set the
capacityReserved private member, since the d may be referencing the
const shared_null or shared_empty which live in read-only memory.
The squeeze() methods check for ref > 1 instead of ref != 1 to prevent
detaching from the shared_null/shared_empty unnecessarily; the
shared_null/shared_empty ref count is -1, meaning squeeze() will never
detach from it.
Change-Id: Id3f1725a6f08b3a462343640a47bbe78f08ca7e7
Rubberstamped-by: Lars Knoll
Reviewed-on: http://codereview.qt-project.org/5454
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QWidget's move() sets the position of the window including the window
frame, unlike setGeometry(). There was no equivalent for this in
QWindow, so several QWidget auto-tests were failing. Now we add
setFramePos() to achieve the same purpose in QWindow.
This fixes tst_QWidget::windowState(), which uses move().
Change-Id: I9a3e558bd615a8f0234cc3dd94fbb2bf5ecbc148
Reviewed-on: http://codereview.qt-project.org/5405
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
In QWidget::setWindowState() there was some code to emulate window
states when they're not supported by the backend, by hiding the window
on minimize or using the screen geometry and the frameless window hint
to manually try to make a window fullscreen.
However, some of this code was being run even when the backend does
support setting window states, specifically calling setParent(0) to
force a re-creation of the platform window and calling show(). These led
to the window getting the wrong position after being minimized or
fullscreen and going back to the normal state.
Apart from storing the normal geometry of a widget when going away from
the normal state we shouldn't do any magic when the call to
QPlatformWindow::setWindowState() succeeds.
tst_QWidget::windowState() still fails due to calling move() to set the
position of the widget including the frame, when QWindow currently only
supports setting the position of the widget excluding the frame.
Change-Id: I1c1a337d3c15f14c1c842bd1e347f94e6b67d7eb
Reviewed-on: http://codereview.qt-project.org/5367
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Simplify the combobox implementation by removing child logic.
Instead have an option to open the combobox.
Change-Id: I1bb517d0d064aefa28594b8fa957b8b2c9d48e88
Reviewed-on: http://codereview.qt-project.org/5032
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
QFontDatabaseQPA should be able to reinitialize database and
reregister all the fonts when an application font is added, because
it will trigger db->invalidate().
Add cloneWithSize support to QFontEngineBox so that even no usable
font is found in QFontDatabase, QRawFont::setPixelSize can still
work (without making the result rawfont invalid).
Register application fonts with QFontconfigDatabase, the code is
adapted from QFontDatabaseX11.
Reenable QRawFont tests for QPA, these usages are now supported in
QPA.
Fix QStaticText tests, raster in QPA does support transformations.
Translate the text before ZAxix rotation so that it will be visible
in canvas.
Add back fixedPitch support to QPA, and fix QFontDatabase tests.
Fix QGlyphRun tests, ignore non-existence glyphs in alphaMap
locking.
Fix QFontMetrics tests.
Task-number: QTBUG-21415, QTBUG-20754, QTBUG-20977,
QTBUG-20976, QTBUG-20760, QTBUG-20759
Change-Id: I24aea7d6ec6b2ac6342134d1f2591327c23a692b
Reviewed-on: http://codereview.qt-project.org/5384
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Tests for widgets should select the
QWidget * version of overloaded QTestLib
functions rather than the QWindow * version.
Change-Id: I8b540b630758c0e7ba7ed88aba45d624c83ff378
Reviewed-on: http://codereview.qt-project.org/4977
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Matthew Cattell <matthew.cattell@nokia.com>
Each destination and the format of output to write there is specified by
adding "-o filename,format" to the command-line. The special filename
"-" indicates that the log output is written to the standard output
stream, though standard output can be used as a destination at most
once.
The old-style testlib output options are still supported, but can only
be used to specify one logging destination, as before.
If no logging options are given on the command-line, a plain text log
will go to the console, as before.
To log to the console in plain text and to the file "test_output" in
xunit format, one would invoke a test in the following way:
tst_foo -o test_output,xunitxml -o -,txt
This commit also enhances the selftests to test with multiple loggers,
but negative tests (e.g. bad combinations of command-line options) are
left for future task QTBUG-21567.
Task-number: QTBUG-20615
Change-Id: If91e752bc7001657e15e427aba9d25ab0a29a0b0
Reviewed-on: http://codereview.qt-project.org/4125
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Modify the selftest to be able to run each subtest with a list of one or
more test loggers. The addition of tests that use this capability will
be part of a subsequent commit.
Task-number: QTBUG-20615
Change-Id: Iac3efe8220e8245aa7e5589348d2c86b8034dd28
Reviewed-on: http://codereview.qt-project.org/5292
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The multiexec test runs the same test object five times. If the -o
option is given, the output file is overwritten by each run of the test
object, meaning that tst_selftest only sees 1/5 of the test output in a
file compared with what it sees on the console. This makes it
impossible to use the expected output file to verify the test for both
console and file output. This issue is noted in QTBUG-21561.
Change-Id: I00031a2ea43a7ef78e8317473a089306ec062d8e
Reviewed-on: http://codereview.qt-project.org/5270
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The warnings selftest verifies that qtestlib correctly handles output
sent via qDebug() and friends. The test had a number of printf calls
that were used to tell the user what output they should expect to see
next, but by bypassing testlib's logging, these made the testlog differ
depending on whether the test log was directed to the console or a file.
The printf calls are no longer needed, as any regressions in qDebug will
be detected by tst_selftests, which compares the output of the warnings
test with a reference copy of the expected output.
Change-Id: I8c3a3237463141fa494c50ca02062760cb583090
Reviewed-on: http://codereview.qt-project.org/5200
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Make the test use qDebug instead of printf, so that the reference test
output is the same regardless of whether the log goes to the console or
a file.
Also rename the test class, as it was evidently cut-n-pasted from the
subtest selftest without being renamed.
Change-Id: I8df1f0989f2e8c33c1f829ba8110fd740ff70f63
Reviewed-on: http://codereview.qt-project.org/5184
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test was attempting to verify two completely unrelated things, so
this commit splits it into two tests.
Also, printf calls are replaced by qDebug so that the test does not
bypass the testlib loggers.
Change-Id: I1a202af38ce2c69690a32d93405ba604ec6cabee
Reviewed-on: http://codereview.qt-project.org/5178
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test is not useful for finding bugs in qtestlib's logging code,
because it bypasses the qtestlib loggers and doesn't play nice with
tst_selftest. Neither is this test very useful for finding bugs in
QTest::qWait(), as the test only proves the qWait() terminates, not that
it waits accurately, or even that it waits at all.
Change-Id: Ia5dd7cbaf3a6fbb4e94e54ed155263580e495694
Reviewed-on: http://codereview.qt-project.org/5173
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Move handling of -qmljsdebugger= argument from QApplication
to QCoreApplication. It makes sense to allow debugging also
for applications based on QCoreApplication (which we intend
to support in QtDeclarative).
Change-Id: I5a03a4510fc166cea5aad146da673ee0e7cd5d36
Reviewed-on: http://codereview.qt-project.org/5121
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Stop the mis-use of navigate to find the parent.
In order to make navigation straight forward
parent and child functions are now part of
QAccessibleInterface.
This allows navigating the hierarchy of
accessible objects without the 1-based indexes in the
navigate function which lead to confusion.
Eventually the support for Ancestor in navigate can be completely removed
and forwarded in the windows bridge if needed.
In addition default parameters for virtual children.
This will make the transition smooth since it allows to remove the integer
already.
Change-Id: I278287ce17161f9fa46797ac244676778c859576
Reviewed-on: http://codereview.qt-project.org/5024
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
This is in preparation of removing testlib's
dependency on QtGui and QtWidgets.
Autotests that need QtWidgets api must
explicitly include it (since the types are no
longer provided by the QtGui master header).
Autotests that don't need QtGui or QtWidgets
api shouldn't link against those libraries.
Change-Id: I2808289068514fcac582808828ad4634e2631733
Reviewed-on: http://codereview.qt-project.org/5093
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Problem was fixed by Change Ie172e935: Revert accidental v8 submodule version downgrade
Change-Id: Ie0467170df70e9fcc10837150103d48ddd48734b
Reviewed-on: http://codereview.qt-project.org/5006
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Matthew Cattell <matthew.cattell@nokia.com>
If the MKSPEC we get is an absolute path, we should
pass that one on to qmake. Otherwise it'll try to
find the mkspec in the install location. This fails
as 'make check' is being run before installation.
Task-number: QTBUG-21402
Change-Id: Ie872546f2ee7c5d737e50a1779637e393538ccc2
Reviewed-on: http://codereview.qt-project.org/4999
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Don't store separate strings for the logger name and the associated file
suffix -- just use the same string everywhere.
Change-Id: Ie7d1af6bf906b5ac09fbd5fcc5754b68036fb370
Reviewed-on: http://codereview.qt-project.org/5060
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The selftest was only attempting to delete the output file at the end of
the entire test run. This file should actually be deleted after each
subtest to ensure that it does not cause confusing errors if the next
subtest fails to overwrite the output file.
Change-Id: Ia3827926f71a697c6108de3f2b08c969f761d978
Reviewed-on: http://codereview.qt-project.org/5051
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
