... as this would require us to remove usage of QAbstractEventDispatcher::flush
from Qt source code as well. We can not do this already in Qt 5.9 as there are
few event dispatchers in Qt that actually do override the ::flush (with non empty
bodies). Removing this code could result in behavior changes (not very likely) for
some user code. This method will be removed in Qt6.
Instead mark it with a well known "### Qt{Version}" comment.
This patch amends 41eefd7. The warning was:
qcoreapplication.cpp: In static member function ‘static void QCoreApplication::flush()’:
qcoreapplication.cpp:733:48: warning: ‘virtual void QAbstractEventDispatcher::flush()’ is deprecated [-Wdeprecated-declarations]
self->d_func()->eventDispatcher->flush();
Change-Id: I48a1c68b84ff93268956205e1205e6d4b5d48664
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the options are mutually exclusive, with the last one winning.
Task-number: QTBUG-60382
Change-Id: Ie6d888ac8be6b22b204fcad93c184477baa38965
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
instead of calling eval() on the entire output, loop over it line by
line, because:
- the first line is a message, not a variable assignment
- eval() can process only one statement at a time
Task-number: QTBUG-60255
Change-Id: Idca652910c8f2c852372d486c51c8554bc708dcf
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
delaying the logging setup until the cache use is determined (which
depends on xspec determination) causes too much trouble.
as already explained in 7ac15ab0f, there is a bit of a gray area when
exactly the log should be cleared anyway.
a more complete solution would cache the tests' output along with the
results and re-log it (with an appropriate marker) upon re-use.
Task-number: QTBUG-59565
Change-Id: I17d457598d885bceafd6505cad5ff074c4ace502
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The result of "make install" should be the same regardless of whether it
has been run multiple times and the destination exists already. This is
done by making the file installation calls always take canonical source
and target paths and not look at the target directory.
Task-number: QTBUG-60370
Change-Id: I83a584c0dbc4fd10c79976d4169bf6bc051884a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
I don't know why.
tst_qflags.cpp(114): error: no instance of function template "verifyConstExpr" matches the argument list argument types are: (Qt::MouseButton)
tst_qflags.cpp(91): note: this candidate was rejected because there is a type mismatch after argument substitution
Change-Id: I84e363d735b443cb9beefffd14b9581d77933cb8
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Change-Id: Ib7cf5db6c9a49e7f359410bc0ec3d1ceadcde5cf
Reviewed-by: Stephan Binner <stephan.binner@basyskom.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
The intersection algorithm for intersection with rects, might return
one edge of the rect even if that edge does not intersect with the path.
To deal with that we collapse paths with empty bounding rects to the empty path.
Task-number: QTBUG-60024
Change-Id: I3e305983c66548e772d7d7ce3de99d715edbdd1b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
I don't know how widespread this use is, but apparently sddm seems to
set DESKTOP_SESSION to be the .desktop file that it used to launch the
session (minus the .desktop extension). In that case, we should read the
DesktopName entry from the file to get the actual desktop type.
And since the desktop detection from QGenericUnixServices should
suffice, we don't need to repeat the same code in QGenericUnixThemes.
Change-Id: I0e1a09998253489388abfffd14b5eeefbd7fe740
Reviewed-by: J-P Nurmi <jpnurmi@qt.io>
They have not been tested with Qt 5, not even once to make sure
that the mkspec passes the sanity check.
This removes for OSes:
HP-UX (running on PA-RISC -- Itanium still supported)
SGI IRIX
SCO Unix
Tru64 Unix
Unixware
And compilers:
IBM xlC (Visual Age C++)
HP aCC compiler (PA-RISC and Itanium)
PGCC, cxx and kcc on Linux
There were a couple more OSes detected in the configure script that were
lacking even the mkspec. Those have also been removed.
Of those, only hpuxi-acc and aix-xlc have been tested in the last 9
years, though only with Qt 4 and never tried with C++11 support. IRIX
was last tested over 10 years ago and PA-RISC is definitely not
supported due to its lack of atomic operations.
Support for HP-UXi and AIX is now only possible with GCC (assuming GCC
supports those). Support files for Oracle's Sun Studio compiler are left
behind, but its state is unknown.
Change-Id: I7814054a102a407d876ffffd14b69c796b97c972
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This reverts commit 96c27f0dfa.
We now use a custom keychain that should fix the original
problem with the test.
Change-Id: I52e4105f34a46ad7080750d9a62480ebe3a56e68
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The text member was never filled and thus was not set in onKeyUp.
Change-Id: I0d0094745c385e0942635da643d863868b010c2a
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The event's count parameter is used to determine the number of keys
involved in the key event, not the repeat count of the key press.
The desktop windows implementation does not pass the "count" parameter,
so we omit it as well.
The tryShortcutOverride parameter is only used on macOS and thus can be
omitted as well.
Change-Id: Id7554e43cc73ec616f68444e82a38418e622e20a
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The QOpenGLWidgetPrivate destructor calls reset(), which accesses
the Q-pointer. Calling Q_Q(Class) while still inside the private
class's destructor is wrong due to the cast in q_func() which is
undefined behavior at that stage.
Here is the UB report:
qopenglwidget.cpp:548:5: runtime error: downcast of address 0x000016d0e200 which does not point to an object of type 'QOpenGLWidget'
0x000016d0e200: note: object is of type 'QObject'
00 00 00 00 10 30 32 0f 00 00 00 00 40 e2 d0 16 00 00 00 00 80 7b 42 0f 00 00 00 00 00 00 00 00
^~~~~~~~~~~~~~~~~~~~~~~
vptr for 'QObject'
0 QOpenGLWidgetPrivate::reset qopenglwidget.cpp 656 0x607e667
1 QOpenGLWidgetPrivate::~QOpenGLWidgetPrivate qopenglwidget.cpp 570 0x60982ab
2 QOpenGLWidgetPrivate::~QOpenGLWidgetPrivate qopenglwidget.cpp 569 0x6098516
3 QScopedPointerDeleter<QObjectData>::cleanup qscopedpointer.h 54 0xcbf7058
4 QScopedPointer<QObjectData, QScopedPointerDeleter<QObjectData>>::~QScopedPointer qscopedpointer.h 101 0xcbde858
5 QObject::~QObject qobject.cpp 1042 0xcb94792
6 QWidget::~QWidget qwidget.cpp 1701 0x5e173f7
7 QOpenGLWidget::~QOpenGLWidget qopenglwidget.cpp 946 0x608d72b
8 ImagePreviewComponent::~ImagePreviewComponent imagepreviewcomponent.h 16 0x58237b6
9 ImagePreviewComponent::~ImagePreviewComponent imagepreviewcomponent.h 16 0x58238c6
Change-Id: If13932ac657afb9d1358ac82ab911a05e96cfbcd
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This should not change the result since fixed1616ToReal also divides
by 65536. It's just to make it consistent with the other places that
we use fixed1616ToReal.
Change-Id: I96b3a07d1cbc98d7bdbe7a3b6035b196e34a5abc
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
The fix is outdated - the tests it was fixing - pass on 10.11.
Change-Id: I8b42c1d3d2f1279382b15c20587dcc93cf1b6b40
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
qdbusplatformmenu_p.h:131:9: error: private field 'm_reserved' is not used [-Werror,-Wunused-private-field]
qdbusplatformmenu_p.h:192:10: error: private field 'm_isSeparator' is not used [-Werror,-Wunused-private-field]
etc.
Change-Id: I84e363d735b443cb9beefffd14b8bc4253081145
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
These are in public classes, so we can't remove them until we get to
Qt 6.
qtimer.h:231:20: warning: private field 'del' is not used [-Wunused-private-field]
Change-Id: I84e363d735b443cb9beefffd14b8b5fb720c9e41
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
ICC 17 does not yet implement C++17 [[fallthrough]] nor does it support
GCC's __attribute__((fallthrough))
Change-Id: I84e363d735b443cb9beefffd14b8aba60a7e3f81
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Calling SecTrustSetAnchorCertificatesOnly(trust, false) we actually extend
what our user provided in QSslConfiguration as CA certificates (caCertificates,
setCaCertificates) - Secure Transport will also use a default set provided
by the system and SSL handshake can surprisingly (for a user) succeed.
And the default content of these caCertificates, if not altered by setCaCertificates
call - are those system CA certificates.
Task-number: QTBUG-60233
Change-Id: I8c1094bb7eec260f5202a47085f9f75e720eda7b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Unselecting with offscreen and minimal platforms behave similarly as in
Windows and QNX. If left or right key is used for unselecting, cursor
position is changed.
Change-Id: I022cd2fec80ad1875fec983e1e3536a105e18bb2
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Some of the public APIs are still documented in private (_p.cpp)
source files. Let qdoc parse them.
Change-Id: I29ad87c21d663504f2b947d8b9ed76609c7946f3
Reviewed-by: Martin Smith <martin.smith@qt.io>
If QEMU is provided sysroot with QEMU_LD_PREFIX, it opens files from there. If their
owner is the current user, testing their access rights based on assumption that they
are root fails. Skip the tests in that case similarly as is already done when the
tests are run as root.
This fixes following tests:
- tst_QTemporaryDir::nonWritableCurrentDir
- tst_QNetworkReply::getErrors(file-permissions)
- tst_qstandardpaths::testCustomRuntimeDirectory
Task-number: QTBUG-59966
Change-Id: I972ce37b4b5a7747cdd732a8e4a737ef09cbc6a5
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Changed testing of focus of modal dialogs to match behavior on offscreen
and minimal platforms.
Change-Id: Ife3ea41b4b78df2e64c8d8e740332914b1e5a67c
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Some features are not implemented by "offscreen" platform. Skip tests
failing because of that. Some failing cases are also already skipped or
blacklisted on "xcb" platform.
Change-Id: I17269169379c270bd7d6f2ddda03ad9b114a71ce
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
We might call updatePreeditText from the QCoreApplication dtor by
running an event loop from inside a "post routine" added with
qAddPostRoutine().
Task-number: QTBUG-60000
Change-Id: I04c08fe36bfa63ac345a06e50952d2ec83a78ac0
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Change-Id: Ifa3382098c8f7c2cb1750b7ac5e583ddd71895e2
Reviewed-by: Stephan Binner <stephan.binner@basyskom.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Change-Id: I58a2bd715ff1767571d076a881872bd5eab2caec
Reviewed-by: Stephan Binner <stephan.binner@basyskom.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Android 4.1 has a limitation on how many slots are available
for eglGetProcAddress().
This reverts commit 7e393280e4
("OpenGLES20 direct function call removed") for the Android platform only.
Task-number: QTBUG-60318
Change-Id: I4a7224583e775143021735c037af07a95abbd6bf
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
We guarded against the Unicode form being invalid and did not produce an
encoded form. But we did not guard against proper Punycode sequences
that decode to forms that had not passed the proper Nameprep stage. So
check for that and, if it fails, just keep the label in the form we
found it in (it's valid STD3 anyway).
[ChangeLog][QtCore][QUrl] Fixed a bug that caused certain domain names
that look like Internationalized Domain Names to become corrupt in
decoded forms of QUrl, notably toString() and toDisplayString().
Task-number: QTBUG-60364
Change-Id: Iadfecb6f28984634979dfffd14b833142cca8d0d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The module might add QT_RESTRICTED_CAST_FROM_ASCII to DEFINES to
be able to use string literals under the assumption they are UTF8
without warnings from QT_ASCII_CAST_WARN, but this conflicts with
QT_NO_CAST_FROM_ASCII which is added for the headersclean build
step.
Change-Id: Ic1d7b5415350477d751a6c15219d4f8feb816a3c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The whitelist is kept in ACE form, so if the TLD came in Unicode, we
need to run ToASCII before we can check the whitelist. This is slightly
inefficient because we'll run the same operation later in this domain.
Change-Id: Iadfecb6f28984634979dfffd14b831f37b0f4818
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Florian Bruhin <qt-project.org@the-compiler.org>
.. when running event loop with QEventLoop::ExcludeUserInputEvents.
In a properly functioning code, g_main_context_iteration is expected
to block until any event source becomes ready to dispatch an event
(or interrupt occurs). Qt provides several custom event sources to
the Glib event loop. The bug (busy loop) was caused by faulty event
source implementation when QEventLoop::ExcludeUserInputEvents is set.
As long as the window system's event queue was not empty, we signaled
to the event dispatcher that there is an event ready to be dispatched.
This results in the dispatcher calling the relevant dispatch function
(which does handle the ExcludeUserInputEvents flag correctly). As we
do not dispatch user events, the window system's event queue never
becomes empty and we enter a busy loop (CPU running at 100%) where we
signal that we have events to dispatch, but we actually do not dispatch
them and g_main_context_iteration never gets to block.
This busy loop can cause blocking GTK functions such as gtk_dialog_run()
never return.
Task-number: QTBUG-59760
Task-number: QTBUG-57101
Change-Id: I545b7951108eeaba019614ae8f5a1168c8b26c27
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Gunnar Sletta <gunnar@crimson.no>
Add it to the qtcore documentation, but mark it as a tool (code does
not get shipped with customer application).
Change-Id: I75cc199a2bbd86f9e40a75396144645ea69a7bd1
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Strip the quotes from the field name in QSqlRelationalDelegate
implementation to able to find the field in the dictionary.
Task-number: QTBUG-59137
Change-Id: I2f1dc9ce3b9c91ca6cc3d3b82e61e1456c3b22c7
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
