As the directory installation command also works with files as a source
we can unify the external commands, resulting in simpler command lines.
Change-Id: I65013626eedbdb3ce1c77ed230d46edd1603b986
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
VS 2017 still uses vclibs version 14/140 and it also strictly requires
the vclibs' publisher to be set in the manifest. As we only support VS
2015 and 2017 the condition for adding additional vclib dependency
information can be dropped.
Change-Id: I813a9ad976339e347fd8d9283d92282e86b2791b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Use the new qmake install command to copy files around, in order to
avoid the '+' trap of the Windows copy command.
Task-number: QTBUG-60214
Change-Id: I7f588dbbfcdd89b7e98dbef7757944ca856815aa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Adds default off configure flag to use compiler optimizations
for size instead of the default speed/size trade-off.
Change-Id: I36702064ef2cc743d2d03a386adf5cefd5371b6e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the options are mutually exclusive, with the last one winning.
Task-number: QTBUG-60382
Change-Id: Ie6d888ac8be6b22b204fcad93c184477baa38965
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
delaying the logging setup until the cache use is determined (which
depends on xspec determination) causes too much trouble.
as already explained in 7ac15ab0f, there is a bit of a gray area when
exactly the log should be cleared anyway.
a more complete solution would cache the tests' output along with the
results and re-log it (with an appropriate marker) upon re-use.
Task-number: QTBUG-59565
Change-Id: I17d457598d885bceafd6505cad5ff074c4ace502
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
They have not been tested with Qt 5, not even once to make sure
that the mkspec passes the sanity check.
This removes for OSes:
HP-UX (running on PA-RISC -- Itanium still supported)
SGI IRIX
SCO Unix
Tru64 Unix
Unixware
And compilers:
IBM xlC (Visual Age C++)
HP aCC compiler (PA-RISC and Itanium)
PGCC, cxx and kcc on Linux
There were a couple more OSes detected in the configure script that were
lacking even the mkspec. Those have also been removed.
Of those, only hpuxi-acc and aix-xlc have been tested in the last 9
years, though only with Qt 4 and never tried with C++11 support. IRIX
was last tested over 10 years ago and PA-RISC is definitely not
supported due to its lack of atomic operations.
Support for HP-UXi and AIX is now only possible with GCC (assuming GCC
supports those). Support files for Oracle's Sun Studio compiler are left
behind, but its state is unknown.
Change-Id: I7814054a102a407d876ffffd14b69c796b97c972
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The module might add QT_RESTRICTED_CAST_FROM_ASCII to DEFINES to
be able to use string literals under the assumption they are UTF8
without warnings from QT_ASCII_CAST_WARN, but this conflicts with
QT_NO_CAST_FROM_ASCII which is added for the headersclean build
step.
Change-Id: Ic1d7b5415350477d751a6c15219d4f8feb816a3c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This change restores usability of Qt with older versions of CMake which
do not provide a language feature used in the implementation of the new
Qt5::<ModuleName>Private targets.
Task-number: QTBUG-60229
Change-Id: I6a6a1b09be3edca200692250bb8f0d7f6a1b8f7a
Reviewed-by: Stephen Kelly <steveire@gmail.com>
While a previous commit added the logic for handling arm from a qmake
perspective, the responsible mkspec was forgotten.
Change-Id: I5f36d411f2d2c22d8b048e0931da50d911e7e1b4
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Creating a precompiled header exclusively for a one- or two-file module
is wasteful. The time that it takes to build the precompiled source is
on the same order as a regular compilation, so enabling precompiled
headers for those modules just makes the build slower.
Also make it possible to override the precompiled header by just setting
PRECOMPILED_HEADER to empty.
Change-Id: I0e1a09998253489388abfffd14b5f221288c4826
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Let's not allow any new code that uses non-conforming syntaxes. With
GCC and like, we already use -std=c++11 instead of -std=gnu++11 for that
very reason.
Change-Id: I4a7dc1fe14154695b968fffd14aba9f8cea69c47
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The original commit only added support for GCC and Clang, but not ICC.
Amends 73331eeb
Change-Id: Id7638cf1b538edb1008fb3aa10754c1f517a994f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Otherwise, in separate_debug_info.prf, we try to process the original
target, which is not what we actually build.
Task-number: QTBUG-59779
Change-Id: I2b2d2e7b5f87041cc51075da7c3a5b690f94f1f3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Neither the Intel compiler nor Visual C++ have a dedicated switch to
enable F16C support, like GCC and Clang do. So we used the AVX switch
for that in commit 8241d51f70, as it was
the closest, lowest denominator. That was incorrect and insufficient.
The Intel compiler silently miscompiles the intrinsics with -xAVX,
making calls to out-of-line functions like _mm_cvtps_ph, which don't
exist. So we actually have to use AVX2 support to generate correct code.
That might be a problem later, since Ivy Bridge supports F16C but not
AVX2.
Visual C++ is able to generate F16C code with just -arch:AVX.
Either way, since there's no dedicated command-line switch, there's also
no dedicated preprocessor macro. We're using __AVX2__ for both
compilers, as that's a sufficient condition to indicate a processor that
supports F16C.
Change-Id: I27b55fdf514247549455fffd14b205b8d8b86da7
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The .pro file requires the QMAKE_CFLAGS_F16C to be set to something. So
set it to AVX, as the instructions require the VEX prefix anyway (ICC
has no dedicated option for just F16C).
Change-Id: I27b55fdf514247549455fffd14b171940afd35a2
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The configure-time detection (cxx11default) isn't enough if the compiler
can be changed. This is especially necessary if Qt is compiled with a
compiler that defaults to >= C++11 (e.g., GCC 6) and then the user
selects a compiler another compiler (e.g., Clang) via -spec option. In
that case, we'd miss adding the -std=c++11 or -std=gnu++11 option to the
command-line, causing the compilation to fail.
As a nice side-effect, even moc without moc_predefs.h will now get the
__cplusplus setting.
Task-number: QTBUG-58321
Change-Id: I74966ed02f674a7295f8fffd14a8be35da9640e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The compiler is mostly GCC in disguise, but the libraries are not. Since
the toolchain is not open, it's difficult to fix issues in it.
Task-number: QTBUG-59671
Task-number: QTBUG-59672
Change-Id: Id92f4a61915b49ddaee6fffd14aea2639153f073
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
the borrowing of headers always happens from "proper" modules which are
actually built as frameworks if so requested. that means that even
though the borrowing module itself never is a framework, it needs a
framework path and include paths that point into frameworks.
amends 20c7ab44.
Change-Id: Ic582060dd179cc592e9be7792ff02cebdfabd772
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add the option to omit code generated by wayland-scanner, to
avoid the case where the Qt versions replace driver-specific
functionality.
Task-number: QTBUG-58299
Change-Id: I508b18b9392dbd9e2b8233399301c06410f9f5ba
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
It is ignored (and is unnecessary to begin with) in that case,
and emits an annoying warning which this patch silences.
Change-Id: I6059969724b203d6e0e2eea81ad3e3e8f8d536d6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This fixes an issue which caused certain iOS projects to fail to link
when building with Xcode, and also fixes an issue where projects were
only ever built with -fembed-bitcode instead of -fembed-bitcode-marker
for debug builds with the makefile generator.
Task-number: QTBUG-58754
Change-Id: Icf0c9f0d64dbc0b38d6c48bf635c5383a78bd6d5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
otherwise, the invalid "--qpa xcb" would complain about "xcb" being
unknown, rather than "--qpa" missing an argument.
actual booleans are handled by the type-specific callback, just like
-foo would be.
Task-number: QTBUG-59062
Change-Id: I96632dacfb721cfcbf223b76f6c5c38c810e8d0e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Sometimes, users need to add compiler flags to QMAKE_CXXFLAGS that
aren't supposed to be passed to the predefs dump. That's especially true
for -include options, as that would change completely what's
defined. Not to mention that -include is a preprocessor option and
shouldn't be in CXXFLAGS in the first place (Automake has CPPFLAGS, but
qmake only has INCLUDEPATH and DEFINES).
[ChangeLog][qmake] Added the ability to suppress the collection of the
compiler predefined macros for moc's use. To disable the collection, use
CONFIG += no_moc_predefs.
Task-number: QTBUG-58857
Change-Id: I4139d5f93dcb4b429ae9fffd14a34d49825d9b85
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
these statements are assumed to provide dependencies for the currently
detected library. this implies that their resolved content must be
passed to the linker after the to be detected static library.
Change-Id: Ifaaee2ac71bf176e8a0033765fb979fe119deaba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this went unnoticed, because the only cross-module 'use' so far is that
of egl, for which the code path provided for modular builds happens to
(mostly) work due to the specs already providing the library definition.
amends cc842ca4.
Change-Id: I58c638d896eabd26f27d5cd90e3a7f8eeece9bc0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
we derive the keys from the last fragment of the parent directory, which
is potentially not globally unique.
Change-Id: I57cf13394984e6e3d902c0f1bb495bd3920bfc75
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
if a library uses another library which happens to be absent, then the
former must also fail.
amends cc842ca4.
Change-Id: I91f157a6d1ed40b66e196340a282ebe493fcf40e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the outdated ones remain for backwards compatibility; some remain
unchanged.
Task-number: QTBUG-30083
Change-Id: Ia596b854d26b00fcb4f48df0da7ad893650ac1c8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
currently mostly for debugging purposes (especially with -verbose).
Change-Id: I8af32c61df0b19861aa79bc4bbdd3f6095dbe9b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
also actually deletes qfeatures.txt, which was already claimed by
a668c6a6, but not actually done.
Task-number: QTBUG-58411
Change-Id: I686760632fee7c10b01bd2e83f2481b01bc2b774
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
a header-only library in a default location would produce no variables
at all, making it appear undefined. fix this by forcing the writeout of
the QMAKE_LIBS_* variable, and use its definedness (rather than
non-emptiness) as a signifier.
this works for both QMAKE_USE and configure tests'/libraries' 'use'
entries.
Change-Id: Id7a1e23725caba1a91ea4db448b4aeb7fe632393
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
if multiple library entries provide the same export (as openssl is going
to), it makes sense to make them recognize the same input variables, as
it would be rather counterproductive to require different configure
arguments for each.
Change-Id: Ia32842e95294296d50220297f85689bc92de2d05
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
pass the library name instead of a library source object.
improves overall legibility at a marginal runtime cost.
Change-Id: I248ee9622af2b2c37daa2dbc0cc0bca5701d7925
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
icc defaults to -O2, so this was causing debug code to be built like
that, making debugging very hard. This change also hardcodes -O2 for
release builds, just in case.
Change-Id: Ibc5c715fda334a75bd2efffd14a478ce539a3a3f
Reviewed-by: Robert Pancoast <RobertPancoast77@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
