Actually enables headerpad_max_install_names in the darwin-g++ mkspec
as previously it was (presumably accidentally) cleared.
Change-Id: I4b2e5a0dcf38658cfe35bc0e5f24769c80f4d877
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Now QMAKE_RPATHDIR also includes @executable_path and @loader_path
on Apple platforms, and omits any others on iOS, tvOS, and watchOS
since they can't use paths outside the application bundle.
Change-Id: Ia8f76ebcddd51f44eca482a51ce1710369c8df10
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
iOS was excluded in 09aeda21b9, probably
unnecessarily. The build has been found to be warning-free.
Change-Id: I81de2fff40938b6ab9f7a6a5b9f08f8a8baadb16
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
No need to get libs flags other than -L and -l, since we're adding
everything to the LIBS variable in qmake anyway. We wouldn't want rpath
or other linker flags to leak through.
Change-Id: I7d42fe4b581e49df891cfffd146fab61fecbc5c9
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
that variable is not modified in this scope, so there is no point in
exporting it here. it was probably a leftover from an earlier version.
amends c0cc50520.
Change-Id: Ic6f93d8c38d547308aa88ef337fe49bda004b337
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
they are build-time generated, so they must go to the build dir
irrespective of whether we're using pre-synced headers.
Task-number: QTBUG-55585
Change-Id: I5f10b35c40b0ae2ddc5568d70e254b787ac3f914
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
we need to suppress another qtConfig(simulator_and_device) check during
the configuration phase.
amends 60985aa4.
Change-Id: Iae279d282d47b4c254b7a6f9f33315abe126eff0
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
cf53aa21bf and 3aaa5d6b32
were reverted because of reconstruction in 5.7.
defineTest(qtConfTest_checkCompiler) in configure.pri is smart
enough to cover the case in a9474d1260.
DirectWrite: Fix advances being scaled to 0
Since 131eee5cd, the stretch of a font can be 0, meaning
"whatever the font provides". In combination with ec7fee96,
this would cause advances in the DirectWrite engine to be scaled to
0, causing the QRawFont test to fail.
Conflicts:
configure
mkspecs/features/uikit/device_destinations.sh
mkspecs/features/uikit/xcodebuild.mk
src/corelib/global/qglobal.cpp
src/corelib/global/qnamespace.qdoc
src/plugins/platforms/cocoa/qcocoamenuitem.h
src/plugins/platforms/windows/qwindowsservices.cpp
src/plugins/platformthemes/gtk3/qgtk3dialoghelpers.cpp
src/plugins/platforms/windows/qwindowsfontenginedirectwrite.cpp
src/widgets/kernel/qapplication.cpp
tests/auto/widgets/dialogs/qfiledialog/tst_qfiledialog.cpp
tests/auto/widgets/dialogs/qfiledialog2/tst_qfiledialog2.cpp
Change-Id: I4656d8133da7ee9fcc84ad3f1c7950f924432d1e
All of these flags were blindly copied from Xcode and all of them are
not needed because they are unnecessary or at the very least are for no
reason specific to iOS/tvOS/watchOS.
* -fvisibility=hidden,
-fvisibility-inlines-hidden - handled in common/gcc-base.conf
* -fpascal-strings - a Mac OS Classic legacy, no one uses these
* -fmessage-length=0 - formatting option, not needed
* -fexceptions, -fasm-blocks - these are on by default and not needed
All explicitly enabled warnings are enabled by -Wall, which is handled
in common/gcc-base.conf. All explicitly disabled warnings should not be
disabled because we simply do not do this anywhere else in qmake.
Change-Id: Ifb9b2ff100837c7cf5888493a6413c972609598d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Previously we hardcoded the minimum windows version to the initial
Windows 10 release. However features have been added which require a
higher SDK version (eg drag and drop). Deploying such a package might
fail during distribution to consumer devices.
Hence introduce WINRT_MANIFEST.minVersion and
WINRT_MANIFEST.maxVersionTested as variables for the manifest file. If
nothing is specified, both values will be set to the UCRTVersion
environment variable, implying the development setup from which qmake
has been invoked.
Change-Id: I1dcf1e75c67c4ab2fd5a3fdcc32c8783a336e6ff
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
there is no point in doing that, as we don't load it in that case
anyway. in fact, it would lead to caching a new result in every run.
Change-Id: Ia5cb27fa8a5d705d7f32a785b1e3b944f92d8929
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
as these tests do nothing but validating the command line, caching the
result is more confusing than anything else.
also make the tests silent, so they don't clutter an otherwise fully
cached configure run.
Change-Id: Ifc3d65278769b36a056650f077fd6274a7e192e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
instead of saving the files away and restoring them afterwards, use the
new and shiny discard_from() function to throw away everything the files
might contain.
strictly speaking, this is not precise, as the pris may also use *=, -=,
and possibly other operations which cannot be trivially undone, but the
purpose is essentially to discard the special outputs of some features
which may affect subsequent tests, for which this is sufficient.
as a side effect, the failure to load qmodule.pri is not fatal any more
(like for qconfig.pri), to save the pointless effort of ensuring that it
exists.
Change-Id: I07625b60c4f2e27b21206b2c16d24ab111737395
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is a prerequisite for properly constructed framework bundles.
On certain Apple platforms (iOS, tvOS, watchOS), bundles are used
in "shallow" format, meaning that the directory structures are
flattened compared to the one used in macOS bundles.
shallow_bundle allows the difference to be expressed independently
of the platform. Note that the term "shallow bundle" is used by
Apple in Xcode internals.
Change-Id: I1189c52b0ea66843c313783176c11cc2af97ad25
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
when it comes to compiler flags (be it warnings or include paths), it
doesn't matter whether we building/using bootstrap libraries, but
whether we are actually cross-building.
amends c55bdc271f and d8be8110a.
Change-Id: Idf988107e9cccc486672c0ee70dc9bdf8eab9d8c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
"simctl list devices" has changed output format in
Xcode 8 beta to include additional information placed
inside parentheses for each device. And this confuses the
scripts we use to parse and find UUIDs.
Instead of making the inline scripts even longer and more
complex, this patch will factor most of it out to a separate
perl script that reads out device information on json format
and parses the UUID.
Change-Id: I3cd4dc276ecda030fda1932073c8bf1e0bc85deb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
It results in passing an option on the command line that e.g. the
QCommandLineParser doesn't understand.
Change-Id: Ied08c930fab479b6432f025dfe861bdf22c513e6
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
macx-g++40 and macx-g++42 refer to very old versions of GCC that
virtually no one should be using, and macx-llvm refers to the
transitionary LLVM-GCC toolchain that is long gone from Xcode.
Change-Id: Id22ea417515b257babc5ad2a60c8f1fb6d6d1956
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This was probably a leftover that slipped past review for tvOS, and then
got accidentally carried over to watchOS. They serve no purpose as
there are no such named directories, nor does iOS have anything similar.
Change-Id: If2a0f592e83e07db1f3aace320e73046e824994b
Reviewed-by: Mike Krus <mike.krus@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
These actually affect all UIKit platforms (tvOS, watchOS), not just iOS.
Change-Id: I2b45ebecb10d11e33d301071093b5342ce101816
Reviewed-by: Mike Krus <mike.krus@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This fixes errors linking against Qt when built as shared libraries and
with bitcode enabled (default on tvOS and watchOS).
Change-Id: I3eb3bb0b9615e0bc41e43ffae8645248dbf803c6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Mike Krus <mike.krus@kdab.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
It's optional but default in Xcode, and will probably become required
Change-Id: I6917a9cf15b48dbaee57f1a92ea47d68fb3c253a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Mike Krus <mike.krus@kdab.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
- remove the unconditional CONFIG+=c++11 from default_pre.prf, so the
change actually has any effect
- fix up the description fields somewhat
this amends 091df96fb8, which was rushed in without maintainer review.
Change-Id: I88b859d6e2f0fe3d6a4771afe464a7c445e7b47b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
These are not meant to be overwritten by command line defines
anyway. Bad things could happen if they are not in sync with
the values in the pro files.
If you want to change them, reconfigure Qt.
Change-Id: Ic456e54b97e6909f01a4f4be33e3d7e2b2571e80
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Defining QT_OPENGL_ES_2 would only lead to conflicts with defines from
qconfig.h.
QT_OPENGL_ES_2_ANGLE also moves to the .pri.
QT_OPENGL_ES_2_ANGLE_STATIC is not used and is removed altogether.
Change-Id: I614fb00525ac696e066ac8328bb9bf61fca08a01
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
privateFeature would add QT_NO_FEATURE to the DEFINES in the private
.pri file, which was somewhat inelegant.
Additionally, it would add the feature to the _public_ QT_CONFIG
variable, which was plain wrong.
Replace the implementation with the one just introduced for
publicFeature, with the difference that the features are written to the
private files instead.
As this entirely disposes of the old system, all usages in the project
files need to be replaced atomically as well.
Change-Id: I506b5d41054410659ea503bc6901736cd5edec6e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Added a qtConfig(feature) function to qmake, and a QT_CONFIG(feature)
macro. These can safely check whether a certain compile time feature of
Qt is enabled or not.
For this to work the feature has to have a publicFeature or
privateFeature output in the configure.json file.
In pro files, please use the qtConfig(feature) test function
instead of checking contains(QT_CONFIG, feature), as the latter
will be unreliable with the upcoming modularization (it requires a
load(qt_module_config) before doing any such checks). Note that
feature names are now lowercase, and identical (except for hyphens
versus underscores currently) in the pro and c++ files.
This makes the logic easier to follow, as we avoid all double negations,
and most importantly, QT_CONFIG and qtConfig are implemented in a
way that you'll get a build error for a mistyped or non-existent
feature. This will also prevent accidental use of a widget feature
in gui in the future.
This gives us complete symmetry between the handling in pro and
c++ files.
Change-Id: I60404f97953724e639ffb6386cce2e8b1e4b735a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Output the version as a define into the private config header as
a define using a hex number. Like that we can easily do version checks
on libraries using the QT_LIBRARY_VERSION(lib) and QT_VERSION_CHECK()
macros.
Change-Id: I6dc4ac6550886ca95c5542b6e75cd933ed079d76
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this wasn't possible when these headers were still generated by syncqt,
as the targets may have been still missing at that time. however, as we
do that now with qmake, forwarding the timestamps is perfectly possible,
and is consistent with what syncqt itself does for "regular" headers.
the immediate problem this solves: when the early creation of the
forwarding headers in qtbase.pro is removed, they get created only when
corelib.pro is processed. their timestamps would be after the timestamps
of the already built bootstrapped libraries. if now the project files of
these libs get re-created, qmake's not conditional-aware dependency scan
would add these headers to the libs' deps, thus causing them to be
re-built. the re-built tools would in turn cause all mocs and thus all
libraries to be re-built. this would be particularly problematic if it
happened between 'make' and 'make install' due to another bug ...
Change-Id: I8d597f1f925369d93aaf3cc6c02e954eeae003a4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this switches all instances of LIBS[_PRIVATE] += -lfoo where a config
tests exists for foo.
this removes some code duplication between tests and project files (in
case of conditionals), and ensures that the projects always actually use
the libraries configure has found.
Change-Id: Ia7e80c8db5f329290c7f1a4e03a8bf78882a687e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Adding an entry that represents an external library to the
QT_USE[_PRIVATE] variable will cause qmake to lookup the
required compiler/linker flags from the configuration system,
and add them to the module that is being compiled.
Change-Id: I309aa2749ddf4fab13ab8fdd26e8ab2123719ea8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
cleaner, and covers windows as well.
Change-Id: I0e884909a3f49610fab750ba1ef6112f43e5d5d1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Adapt configure.exe to use qmake to do most of the work of configuring
Qt. This unifies a large part of our configuration system between Unix
and Windows. configure.exe is now still doing the license check,
creating qconfig.cpp, building qmake, and not much more.
On the way, re-implement the still missing Windows-specific tests with
the new system.
The opengles2 vs. opengl-desktop conditions got a bit convoluted, as
Unix prefers desktop GL, while Windows GLES2 (via ANGLE). Superficially,
there is a circular dependency, but the platform scopes are supposed to
break it.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Ia1941f2c34b7f5bd4990a7673cd737361381c2e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it is sometimes desirable to override values from the mkspec without
modifying (or wrapping) the spec itself. linux distributors do this on a
regular basis.
so far, we'd pick up CFLAGS, etc. from the environment, in a somewhat
autoconf-like fashion. however, over time, this approach proved
problematic: the concept doesn't mix particularly well with mkspecs to
start with, is unexpected (and therefore causes frustration), and
doesn't mix well with cross-building (at least the way it was realized).
ironically, it was implemented this way (quite a while ago) upon my
explicit request ...
the new mechanism uses explicit variable manipulations on the configure
command line, just like qmake itself understands. as it happens, this is
again quite similar to autoconf-generated configure scripts. however,
this time around we don't pretend to be actually autoconf-like, so we
also don't try to map any variable names (some of which have different
semantics anyway).
this commit also eliminates the last use of the QMakeVar() function,
so delete it and the underlying infrastructure.
Task-number: QTBUG-32530
Task-number: QTBUG-42962
Change-Id: Id31a6b80e1add08ca21f5b178614bda530d12374
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add the command line options supported by the windows version of
configure and respect them when running our configure tests.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I1206d60a177e251540d34d232c73c930847564b3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
So far we only had support for locating executables. Also
support locating header files and libraries.
Change-Id: Ib2a83e8338d2da975204089d84c608061a081f29
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Some test types (like the compile tests) require that other
features have been checked before, so that the compile test
sets up the right environment. Implement this through a
'testTypeDependencies' section in the json file that explicitly
encodes those dependencies for certain test types.
This replaces the 'priority' field in the feature list.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I70e7c67a4f2c971149bcac090cecbbe9cfff3f57
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
so far, each library was distributed over a test and (optionally) a
'library' output of a feature. this was conceptually messy and limiting.
so instead, turn libraries into a category of their own.
libraries now support multiple properly separated sources, which makes
overriding them a lot saner. sources can be conditional to accommodate
platform differences.
as an immediate consequence, move (almost) all library references from
the config test projects to the json file.
a few tests were excluded, because they are doing somewhat magic things
that should not be handled in this bulk change:
- freetype: .pri file shared with actual source code
- clock-gettime: -lrt is conditional, and there is a .pri file which is
shared with actual source code
- ipc_posix: -lrt & -lpthread conditional
- iconv: -liconv conditional
the multi-source mechanism is used to make a variety of tests work on
windows, where the library name differs from unix (and sometimes between
build configurations). some tests still needed minor adjustments to
actually work.
on the way, fix up disagreements between manually specified libraries
and pkg-config lines (affecting several xcb-related tests).
Change-Id: Ic8c58556fa0cf8f981d386b13ea34b4431b127c5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
never use $$system() directly, but instead use qtRunLoggedCommand() with
a newly introduced out parameter. that way we can print the command's
raw output, which should help debugging configure problems.
additionally, we now consistently check the exit code of all executed
commands, which should avoid confusing followup errors.
note that as a side effect some calls now use $$system()'s 'lines' mode
instead of the bizarre default splitting mode. this has no impact on any
of the cases, which is why it is basically a negligible style change at
this point.
however, qtLog() gained support for arguments with more than one element
to accommodate this.
Change-Id: I40d907e27de32dfec8d6086ce7d93fc4be18241f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
it's not quite clear what the purpose of this is supposed to be,
especially given that the prf is loaded way after anyone would have
examined QT_CONFIG.
Change-Id: Ia49377c952902fed4084178c7f857e1acd11ad03
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
llvm-ar is not shipped as part of Xcode. Use libtool instead, just like
Xcode does.
Change-Id: Ic9c5e16c826c0d42979556f78d2cf6415542ef93
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
plugins.qmltypes should never be built into resources, but always
deployed on the file system so Qt Creator can read it.
Task-number: QTBUG-52297
Task-number: QTBUG-52299
Task-number: QTBUG-52940
Change-Id: Ieadb82bcb71dd4fb769fa0b7d15ec74e12ce7b42
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This allows overriding the INSTALL_ROOT with the Xcode generator.
Change-Id: Ifb894bdbf9764918f76428fb32d9af68914853f6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This fixes the examples build on UIKit platforms in
examples/dbus/pingpong where there are two Xcode projects and the build
therefore cannot disambiguate between the two.
Change-Id: Ic8b808c1ddf3565bb9861a487eab6854ec177184
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
qtPrepareTool() must be called outside a build pass, as it protects
against concurrent wrapper creation by omitting it during build passes.
Change-Id: I7cf080cf78d1099e4893a204ea40d8c6bc63af58
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It seems there is a configure test which should enable it.
This reverts commit 7e4f0ad961.
Change-Id: I39c594e5e779732d2f5954b42e266a1eaa1be3f0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
In a parallel build we may end up copying the qmldir file at the same
time, which doesn't work on Windows due to file locking. Apply the same
guard for the copying condition as in commit
770a0c91f3.
Change-Id: Ia34395e8654acf192b94e7ea6d0137730e4ea027
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The qmldir file is needed in the build dir for non-installed
static builds, so that qmlimportscanner can work.
Change-Id: I9028db6d1e36da5a2be9b0c1ba4c9d475edd5cb5
Task-number: QTBUG-53926
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it's bound to the bourne shell, which is not readily available on
windows hosts.
on the way, the pch, fvisibility, and bsymbolic_functions tests were
rewritten as regular compile tests. they now just verify that qmake's
built-in support for the tested features actually works.
Change-Id: Ibac246f21b5ececa40da3f576dc789982eaf9fdf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We set CONFIG+=largefile directly from configure, and there is never
a largefile feature in QT_CONFIG.
Change-Id: I3518c749d674529b272685b6ed6c738e48ee5cd7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We used to check if the SDK used by a project is less than 8.0 and error
out if so. The intention of the test was to avoid a situation where a
project is built with an SDK that is older than the one used to build Qt,
but this was obviously bogus, as Qt could have been built with a newer SDK
than the oldest supported one. Also, 8.0 has been outdated for quite a
while.
On top of that, the check failed now that the major iOS version has two
digits.
So let's remove the check for now, until we can handle this in a better
way.
See QTBUG-37592.
Change-Id: I6106b9521b5d47d9906d4db30c2ffa21794bc307
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
When xcodebuild in Xcode 8 beta dumps out the available
destinations, it prints an extra section called 'Ineligible
destinations for the "tst_someTest" scheme'.
Those destinations doesn't contain valid ID-s for the script to
use, which will result in "make check" failing.
This patch will filter out devices that are marked as placeholders.
Change-Id: I88a25b7307e21b76c6f7764a82f67627aae8f02f
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
... and refactor it to make it less scary.
note that "qmake_args" now basically means "qmake + args".
Change-Id: Ifa5b756642de95e2aadf01606d936ea1d7a18210
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
its actual function was qtLogCommand(), but all callers outside
configure_base.prf apparently didn't know that. adjust implementation.
Change-Id: I910d4ba33c6f31debc81c37e3bfff1a288190355
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the command can be a compound statement (usually 'foo && bar' style),
so enclose it in parens before redirecting stderr.
Change-Id: Ib72a2c8ddfd17bf9457e9cfe2652121258ce9a64
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
overriding an output's 'feature' field would just lead to confusing
error messages. the right way is setting the 'name' field.
adjust the 'dbus' library output to this policy.
Change-Id: I912133f3a0a50fc55f2e16a1ed6bfa464aae8d88
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
we pass the pre-quoted value directly to the output function, which
adds another layer of quoting. to avoid over-quoting, introduce the
'eval' attribute which sends the value through eval() first, thus
removing the extra quoting.
Change-Id: Ic63a50cb7eccc61b0f730476e124339aeb95586c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
while the previous code actually worked, it's probably more or less
coincidence that running "false" produces the correct result.
Change-Id: Ib332bd6789ac7188570ba1af4676494b4e2c9d8c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
due to gmake's Makefile auto-rebuild feature, the distclean would
typically invoke qmake. overall, the step would almost double the run
time of each compile test.
instead, just clean between the regular qmake and make steps. this
deletes the object file the test executable depends on, so this is
sufficient to trigger a full rebuild.
Change-Id: If8e254e172dd169e31fd606d9ef31d9a14f670d8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
standardize on the fields in the json structure being single strings in
which separate elements are quoted and space-joined (because quoting
is unlikely to be necessary in the json file itself, and this format
avoids the visual noise of array handling).
the quoting itself is expected to be qmake-compatible, which is assumed
to be the case for the output of pkg-config (it's actually shell-quoted,
but that's the same except in some not-so-relevant corner cases).
Change-Id: Icc1d7abc02c449fa759d9714bc5e56e2b8809585
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The spec, added in 5.7.0, simply defined WIN_INTERFACE_CUSTOM, leading
to the generic, non-X11 typedefs for the EGL native types. This is
fine for the typical embedded use, but is not what is wanted when
targeting xcb, and leads to disabling EGL-on-X support.
Therefore, move the define into a comon header and let the individual
libs decide by defining or not defining QT_EGL_NO_X11. This sets both
MESA_EGL_NO_X11_HEADERS and WIN_INTERFACE_CUSTOM in qt_egl_p.h.
This way Qt builds supporting all three of eglfs (DRM+EGLDevice),
wayland, and xcb (EGL) can be generated out of the box.
[ChangeLog][Platform Specific Changes][Linux] xcb with EGL and OpenGL
ES, as well as eglfs with the eglfs_x11 backend, are now supported on
DRIVE CX boards when using the linux-drive-cx-g++ device spec.
Done-with: Louai Al-Khanji <louai.al-khanji@qt.io>
Task-number: QTBUG-55140
Change-Id: I6f186d16612e170995e3bca1214bcabad59af08e
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This warning has been introduced by VS2015 Update 3 and is not in our
control as the warning happens inside the system headers. To keep the
compile output clean, disable this warning.
Change-Id: I96253538c6d6774bb91cd5a4ea80dda2910e74b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Let the qtattributionsscanner tool generate a .qdoc file in
the build directory that contains code attributions for
this qdoc module.
Task-number: QTBUG-55139
Change-Id: Ic7532c9a7c092f552c36e21ee6cbebdd0107689b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
To make sure it does not end up picking the desktop OpenGL implementation
from Mesa that may be present in the sysroot.
Change-Id: I815eb7d2664f9e62d620acf8260cae40f83dfaf8
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
get rid of the entirely superfluous stock "Aborting." messages -
the event triggering the exit has already reported the problem.
Change-Id: Ib9dfb9e4212f60eceb2ea432cdf56c5a8afe9d65
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is required for projects compiled with CONFIG-=qt, which is not
supported so far, but is required for the new configure system.
Change-Id: I85d7de9105ff68c73e8a433a3c757864a619cce8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
The config test for eglfs-brcm would fail otherwise on modern Yocto-based
sysroots, as these have no /opt/vc, but have a proper egl.pc that has the
include path and libs.
Task-number: QTBUG-50838
Change-Id: Ibe8dcfbfe9aabe00fd8c040e6e41a4479ccb39bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Conflicts:
src/corelib/io/qtemporarydir.cpp
One side encapsulated a repeated piece of #if-ery in a local define;
the other added to the #if-ery. Made its addition to the other's.
src/corelib/kernel/qeventdispatcher_unix_p.h
One side moved some members into a struct; this collided with a #undef
check that neither side now has. Discarded the #undef part.
src/gui/opengl/qopengltexturehelper_p.h
5.7 deleted a bunch of methods; not clear why merge got confused.
src/tools/moc/moc.cpp
One added a name to the copyright header; another changed its URL.
Change-Id: I9e9032b819f030d67f1915445acf2793e98713fa
otherwise we get an unintelligible mess if multiple messages are emitted
in the same category. also, there were already empty lines between
categories, so it was also inconsistent.
Change-Id: I5e6622bc8a5d2773bbd99124cedf4e3eb73b8a60
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the json parser passes line breaks verbatim, so we need to get rid of
them ourselves.
Change-Id: I3b71fe54dcaa8c3a2ff94e8ac4845f49dabe1663
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
they are really meant for pretty-printing the summary in the first
place, and were previously unused when this type was invoked explicitly
(because of using a condition).
adjust the neon/mips_dsp/mips_dspr2 descriptions to match the context
and remove the now redundant "message" fields.
Change-Id: I08558f342a0d9189a37145085e5470f91a9d0881
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
they are really meant for pretty-printing the summary in the first
place, and were previously unused for this type.
adjust the c++* descriptions to match the context.
Change-Id: I2a76b5651892bf9bd6fec315e446bfdb7c3aee97
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
they are really meant for pretty-printing the summary in the first
place, and were previously unused for this type.
adjust the sse/avx/avx512 descriptions to match the context.
Change-Id: Icf514718355c6ccd608d825b70296cc0383dbfe8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
while probably not too useful, the old configure does allow explicitly
disabling verbose mode.
Change-Id: If0585443c649a67f616b3668cc90b18fecde11ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Since Xcode 8 (beta 2) that tool is no longer available
through xcrun. We resort to xcodebuild instead.
Change-Id: If9d7b535c1cbac2caae0112b2003283aeff34fb9
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
C preprocessors augment their standard list of include paths from the
environment: Unix preprocessors use $C_INCLUDE_PATH (for C) and
$CPLUS_INCLUDE_PATH (for C++), plus CPATH for both, whereas MSVC uses
the an environment variable simply called "INCLUDE". Handling this for
MSVC is particularly important because the VCVARSALL.BAT script sets the
necessary #include paths in the environment for important things.
Without that being parsed, moc won't find some #defines, like
WINAPI_DESKTOP_FAMILY.
[ChangeLog][moc] qmake and moc now cooperate to use the Visual Studio
environment variables (set by the VCVARSALL.BAT script) to find system
include files. A possible consequence is that moc parses application
headers slightly differently, depending on #if conditions that depended
on macros that previous versions had not seen #define'd. Implementers of
other buildsystems are advised to pass the --compiler-flavor=msvc option
to moc.
Change-Id: I7e06274214d1939b0124e5b4bf169cceaef9ca46
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
In order for moc to properly parse #ifdefs and family, we've had
QMAKE_COMPILER_DEFINES as a list of pre-defined macros from the
compiler. That list is woefully incomplete.
Instead, let's simply ask the compiler for the list. With GCC and
family, we use the -dM flag while preprocessing. With ICC on Windows,
the flag gains an extra "Q" but is otherwise the same. For MSVC, it
requires using some undocumented switches and parsing environment
variables (I've tested MSVC 2012, 2013 and 2015).
The new moc option is called --include to be similar to GCC's -include
option. It does more than just parse a list of pre-defined macros and
can be used to insert any sort of code that moc needs to parse prior to
the main file.
Change-Id: I7de033f80b0e4431b7f1ffff13fca02dbb60a0a6
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
Conflicts:
qmake/library/qmakeevaluator.cpp
One side changed the iterator to use ranged-for, the other changed its
body; they only conflicted because the latter had to add braces around
the body, intruding on the for-line. Trivial resolution.
Change-Id: Ib487bc3bd6e3c5225db15f94b9a8f6caaa33456b
Now that -l and -fw options are gone, using a combined EXTRA_LIBS
makes no sense anymore and only complicates things.
Change-Id: Ic12bf482f3bed041aff7f0891f008b1f34ae2b4d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This was missed in ab599a3931 when
QMAKE_STRIP was set as a side effect of adding support for separate
debug info.
Task-number: QTBUG-54212
Change-Id: I86dd040dbefec4c58879c7d029ed89dd8bad3daf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
exclusive_builds_post.prf (via default_post.prf) processes
debug_and_release into BUILDS, so .prfs which can rely on being
executed later (because they are loaded via CONFIG) can rely on BUILDS
and related variables.
Change-Id: I5677079ad5145bf493af17b4b60347208572fd21
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the whole point of the check is ensuring that the message is printed
only once for each sub-project, so !build_pass alone is fully adequate.
Change-Id: Ib8f821ead6709efc9bfa935e1d05f8caba02a814
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This patch adds a warning that will be shown when link_pkgconfig is used
in a project but Qt's configuration has it disabled. This can happen
when Qt is built before pkg-config has been installed or if it's not
detected.
This will avoid user losing time trying to make pkg-config work while Qt
just ignores it.
Change-Id: Ieeff8dd6784b9430cfebef355855ec1be91bc96e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
As OpenBSD ships its own X11, linker errors occur when not explicitly
adding the X11R6/lib dir to rpath dirs.
Change-Id: I75991e9d7de115d2d212a017d9c8f9aa93cecc27
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
On OpenBSD, the system compiler shipped is still gcc 4.2.1 but for proper
C++11 support in Qt, QtCreator and Qt-based projects we need to use
the compilers provided in ports/packages which have the binaries renamed
to eg++/egcc. Therefore, redefine the variables from g++-base.conf to
use the newer compilers.
Change-Id: Ic8ea1c5d2c2c0263dad5ae85c8c747bcd3985b7d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This was only used to specify XP as a target which is
not supported on 5.8 anymore. Clean up all associated
special handling in the mkspecs and pro files.
This effectively reverts change 10a0ac75.
Change-Id: I420d73002912989f1a5be961a2d09277ec4a4425
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's only used in one place, where it's actually not required either.
Change-Id: I5766d2b5f0c1083bbd58a9b9fb07cc67bbd46a94
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is not a feature that should get propagated to other
configure runs, so simply hardcode support for it.
Change-Id: Ieb1c33243154b3583e91061d3592d7e87c36f402
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Detect host and target architecture from within qmake, and set
QT_ARCH accordingly.
Change-Id: I30255f88c7645d197bd07355a1dff02b377cbbe8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The regexp were capturing too greedy:
$$replace(c, "^--?(.*)", "\\1") changes --developer-build to
-developer-build. Do not accidentally capture the second dash.
Change-Id: I19586a1678fc3bf3f450ec31f5bd7e71e9514b34
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
NetBSD is heavily dependent on using rpath, so we need to add the
lib dir QMAKE_LIBDIR and QMAKE_LIBDIR_X11 to QMAKE_RPATHDIR
explicitly to avoid linker errors. See http://www.netbsd.org/docs/elf.html
for more info.
Change-Id: I225143d5e2d9a125060b14e3a8a7953927d63b33
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
10586 reflects Update 1, which is the mininum supported version for many
months, hence reflext this in the manifest template as well.
There are additional features (like drag and drop) which require and
even later SDK version. However, they do not reflect the minimum.
Change-Id: I6d71dc499c928ed98c8a25283e0b53994317bb00
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
qmake tries to use pkg-config when the config.test contains PKG_CONFIG,
which will of course fail without the sysrooted env vars. and unlike in
the old configure, these don't become automatically available by virtue
of the script simply exporting them.
longer-term, the test programs shouldn't mention pkg-config deps
explicitly, as these are redundant with what is specified in the JSON
file. relevant changes are already pending.
Task-number: QTBUG-54403
Change-Id: Ie9d3bbb2e4febffde5fd122d7d0a8b70b8679fcc
Reviewed-by: Liang Qi <liang.qi@qt.io>
don't have extra spaces in the pkg-config calls when no environment
variables are injected.
Change-Id: Ieb14f775b2a04726e8f62114b69d9be7fa662eb0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
using the Makefile target separator to determine the host system is of
course not a terribly good idea. the correct variable to query would be
DIR_SEPARATOR, which always reflects the host. however, a direct os
query is less obscure in this case.
Task-number: QTBUG-54346
Change-Id: I6bc1372a7c9a84a241a97f9f767f046b026411c3
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
while the names of the compilers are actually an undocumented internal,
we don't provide an actually working proper way to sequence extra
compiler execution with build-time generated inputs when they are
indirectly listed (as via .qrc files).
Task-number: QTBUG-54299
Change-Id: I269c26512897b72706dc8b769aa47e8157c2a5c5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This follows up ab599a3931, which did not
take installation into account.
Task-number: QTBUG-54036
Change-Id: Ic1b3acb8984255dd1ca1c288b7b150814ce9e606
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
... for a loooong time.
it was replaced by plugin_with_soname (which is unused so far).
Change-Id: Ifc377d155d6eac41e85f3a0914ed817d55b5648b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the tests would inherit MAKEFLAGS, with somewhat predicatble results.
Change-Id: Ia17638f6229d0ae86f5558726850040703d90044
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
libGLES2 (the only user of these libraries) is built dynamically even in
a static qt built when dynamicgl is configured. in this case the static
libraries need not be installed.
amends 2311997.
Change-Id: Ic9bc3937d6ee0d97e0ca7fc96596fa90ebfe8710
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add x86-64 and aarch64le QNX platforms. These platforms will be
available in QNX 7.0.
Change-Id: Iba1f635ba45fddf1a1caf907415a23a510ba0818
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Command line arguments, configure tests and features are now
defined in a json file and a configure.pri containing some
custom functions.
qmake uses the json file to determine command line arguments,
tests and features to be executed at configuration time.
A new qt_configure.prf contains all the infrastructure to parse
the command line, run the configure tests, determine the set of
available features and create a report about it.
Change-Id: If30ac089dd3e9f8c67ebd642bde10cfa960893bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
And blacklisted a few tests in tst_QUdpSocket.
Conflicts:
src/android/jar/src/org/qtproject/qt5/android/QtNative.java
src/corelib/global/qglobal.cpp
src/corelib/global/qsystemdetection.h
src/corelib/io/qfileselector.cpp
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp
tests/auto/network/socket/qudpsocket/BLACKLIST
Task-number: QTBUG-54205
Change-Id: I11dd1c90186eb1b847d45be87a26041f61d89ef6
don't add framework directories (including the respective marker!).
this is consistent with the unix configure code.
Change-Id: I2e187057bc3fe2b35128cd5dc2af57b9f3685d83
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
iphonesimulator_and_iphoneos was renamed to simulator_and_device in 5.7.
Task-number: QTBUG-54163
Change-Id: If4a76f45450edc0f6e8fb3615355613212314300
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
If macx is present, osx AND macos should be required.
Change-Id: I5cd9d41270c741dc314720a1119b163dd17fdfd7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
As common bsd's are using the -ffunction-sections flags from
mkspecs/common/gcc-base.conf, also use the --gc-sections ld flags
like Linux as all are using GNU ld as their linker and all are
capable of using it. The last remaining problems with --gc-sections
removing the .name sections providing the OS tags for distinction of
the execution layer were solved with NetBSD 6.0 and OpenBSD 5.4, see
http://gnats.netbsd.org/40401 and http://www.openbsd.org/plus54.html
so this option can safely be used now to reduce the size of moc and rcc
tools.
Change-Id: I74ccd4f6bc607f6d82d32fc864875f26b26bf167
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Adapt to the OS X => macOS rename in Q_OS_ macros/docs, qmake scopes,
file selectors, etc.
- Add new QSysInfo values and MAC_OS_X / __MAC_ / __IPHONE_ values for
macOS 10.12 and iOS 9.1 through 10.0.
- Update prettyProductName with new macOS "Sierra" codename.
Change-Id: Id976530beeafa01b648ebaa16f4a8f0613fcaf75
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add the strip commands for installation commonly used also on BSD
systems.
Change-Id: I4113ffa559a737ef92afb7c90ab5e1bff902b1bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
So that it actually compiles with gcc-linaro-arm-linux-gnueabihf-raspbian.
Remove also flags a device spec should not set (like -std and -O).
Change-Id: Ib7a3bc298e60715410d5c00fbc22199ab4711fa7
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The rpi3 spec added previously is only half of the story now that we
have the option to use another GL driver.
Change-Id: I1b1edde77bcc6d2f382f1021de9c594c27c34d6f
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
BSD OS mkspecs share mainly the same configurations except very few
differences. Merge into a common/bsd/bsd.conf file to be used across all BSD
OSes in their respective qmake.conf and add a qplatformdefs.h that contain
the common defines to be re-used in the BSD mkspecs.
The change includes the usage of <sys/param.h> also on NetBSD through the
common qplatformdefs.h, which is intended for using NetBSD's version defines.
Change-Id: Ibb0ac9e4c8bb5aff7d0febdcab1a4b9600a61117
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the assumption stated in b67a0836d is actually invalid - configure sets
build_all without debug_and_release there. debug_and_release does
actually imply build_all, though.
to make things less confusing, don't let configure inject
iphonesimulator_and_iphoneos into all projects, but handle it like
debug_and_release instead.
Change-Id: Ib7acdc63308a538862fc603428f81aba60bca08e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
OpenBSD made the switch from a.out to ELF with release 3.4, published
2003, see http://www.openbsd.org/34.html. In preparation to cleaning
up the mkspecs for OpenBSD, remove the a.out defines as only recent
versions of OpenBSD (5.8 onward) will be supported.
NetBSD switched from a.out to ELF file format with release 1.5, see
https://www.netbsd.org/releases/formal-1.5/NetBSD-1.5.html in the year
2000.
Remove the defines for older a.out systems now as we are at release 7.0
and only 6.0 onwards releases are currently supported anyway.
While cleaning up, remove the old comments for QT_SOCKLEN_T values of
outdated OpenBSD and NetBSD releases as well.
Change-Id: I8519eab7bcd4af19c0e9f628657878f32b2bd602
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The qplatformdefs.h for OpenBSD included an undefine of
_POSIX_THREAD_SAFE_FUNCTIONS because of (at the time) missing
implementations of the required _r() functions. After checking these
functions http://www.unix.org/whitepapers/reentrant.html
against the OpenBSD man pages http://man.openbsd.org/OpenBSD-4.4/cat3/getpwuid_r.0
they are all complete with OpenBSD 4.4 released in 2008. As
OpenBSD only supports the current and the last release before (5.8 and
5.9 now), it is safe to assume that this undefine can go away now
for sure.
Change-Id: I341bcae77d1bd7249ac3fdeaefce9c5eb595eca7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The freebsd-g++46 mkspec was intended to specifically use gcc 4.6 from
FreeBSD ports collection. However, the ports collection moves its
"standard" gcc version and uses symlinks to the standard commands
(e.g. gcc -> gcc48) on installing gcc. The current gcc in ports is
4.8.5, so the mkspec is not useful at all.
Change-Id: I041325d05c7dc3f47f4a774d6f46ba24a601bf3e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On FreeBSD, the gcc manpages until Release 5.1 mentioned using
the -D_THREAD_SAFE define when using -pthread. This has been obsoleted
and the gcc manpages from Release 5.2 onwards have this removed.
Now we finally remove this historic relic here, too.
Change-Id: I00a5b688c56f46b938c0806fb44b72d5afe5079e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By using commmon/gcc-base-unix.conf and common/g++-unix.conf most of
the contents of the qmake.conf for OpenBSD can go. The QMAKE_LFLAGS_UNDEF
are reset because the linker can't handle environ in libraries, which is
only added to libc in OpenBSD 6 (http://www.openbsd.org/faq/current.html)
even when explicitly adding -lc to QMAKE_LIBS.
See
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151102/309783.html
for similar questions on using -Wl,-z,defs instead.
Change-Id: I6c725fb3bc7ae63270912b07f230a480c9157dfd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By using common/gcc-base-unix.conf and common/g++-unix.conf most of the
mkspec details can go, leaving us with a minimized qmake.conf.
Change the default X11 location to point to /usr/X11R7 after NetBSD
switched to X.org in Release 5.0 by default.
Also change the default location for addon software on NetBSD, it uses
pkgsrc as its ports system which installs to /usr/pkg by default (the
default value for $LOCALBASE of pkgsrc on NetBSD), see
https://www.netbsd.org/docs/pkgsrc/using.html chapter 4.1.
These default values mirror the current state of NetBSD usage to get
the prerequisites to compile Qt with a minimum amount of configure
parameters.
Tested with NetBSD 7.0 using gcc 4.8.4-nb2 (system compiler)
Change-Id: Ic50757af9f070c0383c7356302e7e7686f031740
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows external integrations to be developed against it.
Also uniforms all class names as QEglFSFoo.
Change-Id: I72ff37c0fcdf1ccd37110b4c36874d6c99b2e743
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
This option hasn't done anything for quite some time, let's
get rid of it.
Change-Id: Ic6f2830aaf69ba2d054ce21f0d144a61ddf5d06b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
LIBGCC_PATH was used before we initialized it, somehow it magically worked ...
Change-Id: I0a9a748ffbfc641f60736b0cf85d23f499b64e66
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This fixes a long-standing issue for Qt packages, where the
paths detected at configure time do not necessarily match the
paths on the user's machine. Hence they have been stripped
manually from qconfig.pri so far, preventing moc from resolving
some includes.
The same logic in configure is left alone for the time being,
since the paths there are also used to filter paths returned
by pg_config and mysql_config. I expect that this will
eventually be removed too in a bigger refactoring going on
right now in dev.
Asking the compiler for implicit paths only works for non-msvc
builds - that is, gcc, clang and icc fortunately have a
compatible way to retrieve the paths. MSVC works
solely on environment variables, which will be taken into
account by a separate patch.
[ChangeLog][qmake] The implicit compiler directories that
moc needs for resolving include files are now determined
when qmake runs. So far QMAKE_DEFAULT_INCDIR was determined
at configure time, which might be wrong for relocated
installations.
Task-number: QTBUG-52687
Change-Id: If0706e8c56a5aca2b6e777e79e90342c498726f3
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Add -lexecinfo for backtrace(3) on NetBSD and OpenBSD. Without,
qlogging.cpp linking will result in undefined references to backtrace
and backtrace_symbols. The behavior required is identical to FreeBSD so
no additional fixes are required (see src/corelib/global/global.pri:41)
Change-Id: I3cfd1d75f1fb5b8505c08a880f91e7b39a5a650d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
FreeBSD 9.3 is still supported and uses gcc as the default
compiler, therefore FreeBSD ports require patching the mkspecs
back. To avoid patching, move the mkspecs back to the right
place and adapt the path in the qmake.conf/qplatformdefs.h
[ChangeLog][FreeBSD] The freebsd-g++ mkspec was moved back and no
longer requires the "unsupported/" prefix, matching the FreeBSD
ports tree, as FreeBSD 9.3 still defaults to using GCC. Users of
GCC that did not previously use the ports patch will need to adapt their
build scripts and drop the "unsupported/" prefix.
Change-Id: Ideda4a33cccf5381000f6f50b6ae92a5c24ba9d4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Having the debug info in separate files is very helpful, especially on
memory constrained 32bit systems. When the debug info is compiled into
the object files, processes can run out of memory when trying to load
them.
Change-Id: I1808a32e855d6a62e17e1b734c511b31db5f03f1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The freebsd-icc mkspec was intended to be used with the Intel
compiler, which nowadays is still only available in version
8.1.038 (https://www.freshports.org/lang/icc/) and for i386 only
while the current version is around 17. On FreeBSD the port
was actually never supported by Intel anyway.
Change-Id: I03b1939be63eef4363bd6b074a6b739365f495ac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
LIBS_PRIVATE is more correct (these shouldn't be part of the public API),
and additionally, using LIBS_PRIVATE also ensures these libraries come last
on the link command, which fixes builds using -Wl,--as-needed.
Change-Id: I9f2e4e78855a30a53ce9013623597b840a2832bd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
While previous SDKs used the form "CE_SDK (CE_ARCH)" in their
configuration/platform names, this is not true fo the Toradex SDK.
Inside Visual Studio the platform is only called "Toradex_CE800"
instead of "Toradex_CE800 (ARMV7)".
In order not to break other SDKs CE_PLATFORMNAME is introduced and
used in the wince80colibri-armv7-msvc2012 mkspec. If the variable
is set qmake uses it as the platform name in its vcproj generator.
Change-Id: Icb501bf6446a9f617745a0d2c7a80b240680b043
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
so far, each module had to do it in its .qmake.conf. by now, all modules
have been adjusted to the expected structure, so we can enable it
centrally.
Change-Id: I16b4e7581e51bfc54e71d2f7f852858ae0b47281
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Other popular specs have this as well.
Change-Id: I44245f37857d476b9ee53ecad021261b94214b2f
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
Reviewed-by: Louai Al-Khanji <louai.al-khanji@qt.io>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
don't pretend that these two flags can be set separately - the
configures set them in tandem.
Change-Id: Ib0beae0152de09026d4627fd3ae0feabd9ce1b81
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When compiling on Windows to for example Android, we may be using the unix
generator, but the make command may be mingw32-make.
Task-number: QTBUG-53038
Change-Id: If8d1e1bea733cf1b4ed837c423a34ecfb3cafd1f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We don't know why it works, but we've been told that it fixes
some builds and we have no reason to think it will break others.
Task-number: QTBUG-52998
Change-Id: Iacaa1fb3c49e4d7aafd4167e591ff3724489872e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
our zlib header includes qglobal.h, so we need the qtcore include dirs,
and qtcore is also where the actual code is compiled into.
Change-Id: I09f530a1b4e6160438215a6d7223c0771ce94f05
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Right now there are no iMX7 SOCs available with OpenGL capable GPUs
so the mkspec is very basic.
Change-Id: Ia5c83eea72c4d436c774b2955ccd71f2256bfd6b
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
- moved prf files to shared location (uikit, added to QMAKE_PLATFORM)
- prepare some formatting (unconditional blocks mostly) to add conditions later
- make device detection script more generic, passing filter strings
as a parameter and returning non-os specific variables
Change-Id: I61f2b77093304ff985bec9da04fda57ff296b16b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
this makes it fully consistent with INSTALLS.
note that this also removes the file name from the target path when
copying files, also for consistency.
Change-Id: I69042c9aa1e2cc81f8ff982343ba25688a04abfd
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
- QMAKE_FILE_IN_EXT as an alias for QMAKE_FILE_EXT, for consistency with
QMAKE_FILE_IN_BASE
- QMAKE_FILE_IN_NAME to make pairing _EXT/_BASE to get a full name
unnecessary (finally ...), and make use of it
- QMAKE_FILE_OUT_PATH, because i'll need it
Change-Id: I3d91ddb84f9cce52a665d562da11d165c92550c8
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
newer versions of qt creator understand QMAKE_EXTRA_COMPILERS and
INSTALLS, so there is no need to list the files twice.
Change-Id: Iccf3cc3248daf3422b8c366c2eb2d2f46c5f08d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the host compiler's version is not determined, so we cannot make any
assumptions about its capabilities.
Task-number: QTBUG-53017
Change-Id: I939fd7402b5daac73f2195b9d8763b9008bc7ea4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rolf Eike Beer <eb@emlix.com>
Under Windows, the default paths are not correctly set, hence it's
necessary to explicitly set this.
Change-Id: I9779485115a93bdaf6eb6be87293ca921746bae7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
this adds file_copies.prf, which understands the variable COPIES, which
works analogously to INSTALLS.
i've been holding this off for a long time, as it is not without
caveats. however, similar hacks are proliferating all over the code
base, so it's time we formalized it.
in fact, it's the easiest way to fix some nasty shadow build problems,
which is why i'm adding this on the stable branch.
Task-number: QTBUG-52256
Change-Id: Icbe3b9fbb79c952546aad2d467a438d3a69d749f
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Use non-os specific target names in Makefiles (device as opposed to
iphoneos, simulator as opposed to iphonesimulator)
Change-Id: Ic8441c09a0e9a254e43f31b678025f16e9a1c440
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Qt Creator uses e.g. CONFIG+=iphoneos to make the default build target
be device. Now that the exclusive build is named simulator_and_device
to support e.g. tvOS, we need to handle the old CONFIG names for
backwards compatibility.
Task-number: QTBUG-52970
Change-Id: I0f864bebf11e657eb4225a182753037205f450b8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
To allow reusing the logic which detects the appropriate
Android SDK version to use for building the Java code,
this is now separated into its own .prf file. This is
required by Qt Purchasing to avoid duplicating the logic
there.
Change-Id: Ief5f5e70dab79751ef9e5a9c4a019bfda686cd09
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This makes the -separate-debug-info configure optional functional, which
generates dSYM debug info bundles for Qt libraries on Apple platforms.
Task-number: QTBUG-37952
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Ia247674740bf450130a15db926df07fa9007e2ca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it doesn't appear to be referenced in any way, either.
Change-Id: Ifd30b435e3e628cd5e48ae24e9aef01c662d6d61
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Incidentally, this introduces QMAKE_RESOLVED_BUNDLE, which can be used
to determine the path of the bundle wrapper itself as well as the
executable target.
This is necessary for a subsequent patch adding support for
-separate-debug-info on Apple platforms.
Change-Id: Ia11430026b8e3f171e5db6677b190b8356832805
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
To make custom builds of Qt possible, we no longer require
the minimum SDK platform to be present on the system.
Instead we will look for any version higher than the
minimum requirement if the minimum is not available.
If the minimum required platform is available, then it
will still be preferred.
Change-Id: I3e804af89aba36e27a7da1e46a25c0c5798aeaf2
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We should really start using -L=/foo and -I=/foo inside of sysroots,
this test was preventing us from doing so (while arguably buying us
nothing).
Change-Id: If6e67631c585493871231e5d8a9354fa72e07343
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this flag specifies that the plugin does not track a qt module. this is
entirely unrelated to whether the plugin should be versioned.
amends f54a3d783.
Change-Id: Ibd3e9bedf488dc58e6354ccf7dd33d974e5f52c2
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
According to the Qt 5.6.0 change log, OS X 10.7 is to be REMOVED as a
supported platform in Qt 5.7.
Change-Id: I53313fd34d42757dd35a28cd227fc0dda3389932
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
So far no capabilities (but internetClient for Windows 10) were added by
default, which forced developers to always manually edit the
WINRT_MANIFEST.capabilities(_device) property.
This allowed to leave out non-required capabilities and keep the created
manifest clean, examples being microphone for multimedia.
However, this also breaks first user experience as deeper knowledge
about this topic is required. Furthermore this is inconsistent with
other platforms like Android, where all capabilities are set by default
and developers need to edit the manifest manually in any case.
With this change, modules can define the capability set to enable all
features in the module. If developers want to disable some again, they
need to adapt the generated manifest. From our experience this needs to
be done in any case, latest at publishing stage when the store
manipulates the manifest.
Task-number: QTBUG-38802
Change-Id: I6d522268ee0afbfa00a30dbdd5e6ec9f415bebf3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Cleaning out the workarounds for the discontinued "Embedded Android"
platform of Boot2Qt.
Change-Id: I0ff9d770e82a43457fb7e5da0428f4597ead4038
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Describe the platforms better because right now the only difference
is the "pro" tag which is easy to miss.
Change-Id: Ia3e31ed97799bf7f8b76ee3d0bb95c7ded7692db
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
The platform header defines geteuid(), which is necessary for the SQLite
library. The common platform header is also modified to handle being
included from C, and resolves a typo on the way.
Change-Id: I8ace8a11ceac0f541b9c9b0d8112609579224884
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Using Visual Studio a user very seldom wants to disable the automatic
invocation of windeployqt. Hence switch from opt-in behavior to opt-out.
This also fixes first user experience to invoke qmake –tp vc and then
hit run on examples.
[ChangeLog][Platform Specific Changes][qmake] qmake-generated Visual
Studio projects now automatically invoke windeployqt by default.
Task-number: QTBUG-52008
Change-Id: Iee1607269c38c7f6c726f554978ac05477bebe5e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The plugin builds as a static plugin.
It is based on the Linuxfb plugin.
It uses the INTEGRITY FB API for framebuffer for display, and HID API
for input (mouse, keyboard, touch).
Because this is the only supported plugin and requires to be included
as a static plugin, automatically add the platform to any application
through qmake.conf.
Change-Id: Ic228afb59cb39dd02c2d538de46caf6e6ea7d153
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
Adapt the mkspec which was forgotten in change
b0ec05f27b.
Task-number: QTBUG-48431
Task-number: QTBUG-51686
Change-Id: Ie95e650de8b7a7027979ec637fb77c7f0357a598
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Targets (xplatform) include integrity-armv7 and integrity-x86.
[ChangeLog][Platform Specific Changes] Added support for INTEGRITY RTOS.
Change-Id: If7827791e0a977ff198cb99e9dcc684a010bbb81
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it's likely that these will be wrong, and the bootstrapped tools usually
don't need them anyway. should they turn out necessary after all, we
need to add -H* variants of the flags.
Change-Id: I15c54c5e25d20ebd474073a530f00254842f515d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it is important that the flags coming from the current qt build appear
first, as otherwise a pre-existing qt installation may interfere with
the build.
the windows configure does not have any of this magic to start with.
Task-number: QTBUG-6351
Change-Id: Iacc1d9b5aa9eed9a5f0513baef9f6c6ffcef0735
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
unlike speculated in 2fe363514, this is not a workaround at all: it
causes that libraries' public link interfaces (LIBS) are exported in the
first place. unlike with staticlib, this does not export LIBS_PRIVATE,
so it wouldn't even be a particularly effective workaround for rpath
brokenness anyway.
the problem was pretty well hidden by the qt module system, which at the
level of libraries is pretty redundant with the .prl file handling,
which shows just how stupid the whole "design" is.
unlike before, we now enable explicitlib for all libraries, not just qt
modules - we enable create_prl for all of them as well, after all.
an immediate effect of this change is that it fixes linking on RaspPI:
the qtcore headers make the user code require linking libatomic, so we
must add it to our public link interface.
Task-number: QTBUG-51621
Change-Id: I5742c88694db8e8a9b79d17222dc6df2b38e5ab2
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
This test was the old way of checking whether to enable
c++11 functionality. That is now anyway required, so there
is no need for this test anymore.
Change-Id: I083e85a4698cac6bd9b573525c7b977f63e14113
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
The platform has been removed in Qt 5.7.
Change-Id: Ie768b5ffbe60270c27b4a670dcf580ea361cb361
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Despite the very similar name and hardware, the software stack is
completely different compared to the Jetson TK1 Pro we already have
a mkspec for.
Change-Id: I45353ece195035e961ff47df55d6361569aabb04
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
There is no test for c++ standard support for the host build
(only for the target compiler/build) which leads to trouble
in some cross compiling environments (old host compiler, new
cross compiler):
g++: error: unrecognized command line option ‘-std=c++1z’
So disable c++ standard compiler flags unconditionally for host builds.
Task-number: QTBUG-51644
Change-Id: Ifb3042e125fe199a7e081740d1171d26ccacf0c5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this is necessary for:
- generating -rpath-link arguments when link_prl is not used. link_prl
is enabled by default, so this has no effect on most projects.
- deployment purposes, which is hypothetical as of now.
Change-Id: I9e629f3eef93c4edf12efc016ecc27dbe2186d61
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This header defines "interface" which will break compilation of dbus.
Change-Id: I16fa35f822adca14304aa827b047358409d4a150
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Testcases and benchmarks are rather different entities. You won't usually want
to run benchmarks in the same environment you are wanting to run tests in,
so this feature allows to differentiate between the two.
We also add a "benchmark" make target (similar to check), which runs all
configured benchmarks.
Change-Id: I33759ce44c34e42a6a3a88f34e7b9c4372380721
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
turns out we need forwarding .pris in this case: without them,
QT_MODULE_INCLUDE_BASE points into the build dir, so we fail to find the
pre-generated headers.
an alternative would be writing primary module .pris which already take
that into account, but that would just add even more arcane code paths.
Task-number: QTBUG-51521
Change-Id: I59f2a0d3f2095c9dfa0a8d1cabfc007a30bd2d23
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
`ar' tool from latest binutils shows warning:
ar error: `u' modifier ignored since `D' is the default (see `U')
Warning message includes word "error" so QtCreator processes it as
error in UI.
`ar' command-line option `u' might be dropped safely because it is
unnecessary. Option `c' is added to suppress extra `ar' warnings.
Other build systems are also affected. For example, automake:
https://bugzilla.redhat.com/1155273
Change-Id: Ia378b720503d93b0c0c12ae7a5f38f4d7c32eee5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This solves an issue where header only modules in a simulator build with
frameworks on Apple platforms would result in a module like
"QtZlib_iphonesimulator.framework" being created. This patch removes
the "_iphonesimulator" infix from the name.
Change-Id: I60e818042d776cc6ac430413ccea1be1a1a1e48b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The win32-g++ mkspec is not based on gcc-base, so
QMAKE_CFLAGS_RELEASE_WITH_DEBUGINFO is not inherited. Therefore,
-release -force-debug-info would build with neither -O2 nor -g.
Change-Id: I4e97cb08f577062dd342fb3e91c02adfd636a310
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
instead of unsetting the flag later on, don't set it in the first place.
Change-Id: Id448500b02b5c3e1dc7c332cc178a84c7fd2cfdc
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this has multiple consequences:
- we do sane DESTDIR replacement for debug_and_release builds, fixing
QTBUG-47313
- we don't create debug/release subdirectories, fixing QTBUG-47639. this
only makes sense given the complementary call of $$qt5LibraryTarget()
- we patch up the .prl files upon installation
Task-number: QTBUG-47313
Task-number: QTBUG-47639
Change-Id: Id409bbd26781a773409b94835ab6b97e71569322
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This also reverts commit 018e670a26.
The change was introduced in 5.6. After the refactoring, 14960f52,
in 5.7 branch and a merge, it is not needed any more.
Conflicts:
.qmake.conf
src/corelib/io/qstandardpaths_mac.mm
src/corelib/tools/qsharedpointer_impl.h
tests/auto/widgets/itemviews/qlistview/tst_qlistview.cpp
Change-Id: If4fdff0ebf2b9b5df9f9db93ea0022d5ee3da2a4
This fixes a regression introduced in
9daeb6fe9d.
Change-Id: I3100b307bb65c90bdc023be4993afaea666e409d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This amends ade8e0fc9b, which missed this
file.
Task-number: QTBUG-32896
Change-Id: I39ef0969c0224349eda4ed82cae3e3b7753fe29f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
This reverts commit c4ecb81d6d.
Hard-coding the library suffix into the linker flags was wrong. The
library suffix is handled at runtime with DYLD_IMAGE_SUFFIX, set
as part of the Xcode scheme or during debugging in .lldbinit.
Change-Id: I11907b2755f7f187fb6fa18202813fde9ada4354
Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Preparation for Apple tvOS support, which shares a lot with the iOS
platform.
Change-Id: I543d936b9973a60139889da2a3d4948914e9c2b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This adds the functionality to build Qt with clang under Windows against
the Microsoft Visual Studio 2015 runtime.
In order to replicate this, a Clang 3.8 build with Visual Studio 2015
Update 1 is needed.
Adds compiler detection to Qt to distinguish correctly the clang compiler
and Windows with Visual Studio.
Clang has some built-in numeric functions, there is no need to use the
Microsoft versions, which also conflict here.
Task-number: QTBUG-50804
Change-Id: Ia4b267a298310ac7d73edf473b12792991249d8a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
This is necessary for combined device and simulator builds on Apple
platforms (iOS, tvOS, watchOS) to link properly.
Change-Id: I21e70806643b10f429945d3020995dc94fa5c612
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Modern FreeBSD doesn't come with GCC by default anymore and doesn't even
provide the "gcc" or "g++" falback that OS X does. So there's no point
in keeping the freebsd-clang mkspec in unsupported/ since it's the only
one that works, or keeping the freebsd-g++* ones outside, as they won't
compile.
I'm not removing the GCC mkspecs because you can still install GCC from
the ports tree.
[ChangeLog][FreeBSD] The "freebsd-clang" mkspec is no longer in the
unsupported/ subdir. If you have scripts you use to build Qt, you'll need to
update them to say -platform freebsd-clang or remove the -platform argument.
Change-Id: I7a9e11d7b64a4cc78e24ffff142dfc11d3aabb1e
Reviewed-by: Raphael Kubo da Costa <rakuco@FreeBSD.org>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The feature is enabled by CONFIG += unsupported/objc_namespace,
but can be easily integrated into other build systems such as
CMake or native Xcode by modifying the LD and LDFLAGS equivalent
for each build system.
This is a less resource-intensive alternative to using multiple
Qt builds with different -qtnamespace settings.
Note: The feature is not supported in any way, and should be
used with care.
Change-Id: Ibb8ba1159db36efd7106c117cc2210c7e2e24784
Reviewed-by: Martin Smith <martin.smith@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Which is basically same as the Jetson K1 Pro, with SDK and compiler
options adjusted.
Change-Id: Ic0aa8144aad12e832ae440212f6a06f52668415d
Reviewed-by: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
10240 describes the first official non-preview Windows 10 SDK. 10586 was
the SDK for the first November update.
Change-Id: Ieb61b944295946eab594b3c7bf234155a67b752e
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
This allows users to add mobile specific features. Also it implicitly
enables support for continuum on Windows 10 Mobile.
Change-Id: I965123722f46df6e84fd279c3bfce478c1172632
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Not that we require it, but since The Qt Company did it for all files
they have copyright, even if they haven't touched the file in years
(especially not in 2016), I'm doing the same.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b4c9d53039846
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Commit 6e6f27b6 made it possible to set the PKG_CONFIG variable using
CROSS_COMPILE as a prefix. The problem with that solution is that it makes
pkgConfigExecutable() skip the environment setup for pkg-config as well,
as it expects the pre-set command to be self-contained - which it isn't.
To avoid this problem we need to store the pkg-config define in the
device spec in a separate variable.
Change-Id: Id8ae7fb03d9253be55840e23fe73b30815ee86c3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
From Qt 5.7 -> LGPL v2.1 isn't an option anymore, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new LGPL header instead of LGPL21 one
(in those files which will be under LGPL v3)
Change-Id: I046ec3e47b1876cd7b4b0353a576b352e3a946d9
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
most module project files define two logical modules: a public one and
the corresponding private one. these are really separate modules as far
as qmake is concerned (even though the private one contains just
headers), and consequently have separate dependencies - QT and
QT_FOR_PRIVATE.
as public modules cannot depend on private ones, all private
dependencies would have to go to QT_FOR_PRIVATE, and a dependency on the
respective public module would have to be added to QT. this would be a
bit tedious, so we have a convenience feature which allows putting
private dependencies into QT, but automatically "downgrades" them to
their public counterpart when creating the public module's .pri file.
however, we failed to put verbatim versions of these private
dependencies into the private modules, which meant that these
dependencies were not pulled in transitively by the private modules'
users.
note that this entirely unrelated to QT_PRIVATE - this one defines the
private (non-propagated) dependencies of the module's implementation,
i.e., the libraries (and headers) that are not part of the link
interface. there is no QT_PRIVATE_FOR_PRIVATE, because there is
obviously no point in assigning the dependencies to a particular
logical submodule when neither one inherits them as far as the qt
module system is concerned.
Change-Id: Ib056b47dde3341ef9a52ffff13efaf8ef8e6817b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
save the actual library/framework name and framework paths in the .pri
file instead of computing them again at use time in qt.prf.
qt_no_framework_direct_includes inherently requires a use-time decision,
so this ugliness remains.
Change-Id: I09b2775e7d8e1d52e3af0d663e1babde10ae4814
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Without this, any test executable requiring a plugin path from
the environment's QT_PLUGIN_PATH will fail to run since the path is
overwritten when generating the 'make check' command, for example:
QT_PLUGIN_PATH=/path/to/qt/plugins \
LD_LIBRARY_PATH=/path/to/qt/lib${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH} \
./test_foo
A prepend config option is used for *PATH to preserve the envvar
value, so use the same option for QT_PLUGIN_PATH. The command above
then becomes:
QT_PLUGIN_PATH=/path/to/qt/plugins${QT_PLUGIN_PATH:+:$QT_PLUGIN_PATH} \
LD_LIBRARY_PATH=/path/to/qt/lib${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH} \
./test_foo
Change-Id: I69b43327974915eae52f299fc4001effe93a491a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
one reason to do that is some users' persistence in destroying their
non-prefix builds by trying an installation.
another reason is the fact that qt.pro's relative_qt_rpath is triggered
by the presence of an install rule for the target, which is of course
not helpful when the install dir is bogus.
Task-number: QTBUG-48406
Change-Id: I75f3940be79fcb5b86e34b975b789692423c92cb
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the main objective was to fix the bootstrap modules in framework builds.
bootstrapped modules which "borrow" headers from "proper" modules can
specify this in a clean way now.
a side effect of this is that the bootstrap-dbus module now has its own
syncqt call.
most includepath-related setup from qt_module_pris.prf was moved to
qt_module_headers.prf.
Change-Id: Ie0d8192cfac1a8cdae0ddd0bc0cd8c3092b1e85b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It only needs stdin now, instead of stdin plus a separate file containing
a list of file names.
Change-Id: I9f3db030001e47e4a4e5ffff1425b76884cc7ca0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
qtAddToolEnv() (via qtPrepareTool()) does not write the tool wrapper
scripts during build passes, while qt_docs.prf (which calls it for qdoc
and qhelpgenerator) was loaded only during build passes. the consequence
was that the makefiles tried calling non-existent scripts.
amends 5418d77a1, sort of.
Change-Id: I64ab573495ca339be4c7b5e8c6848b298b6cb605
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
now that we don't create .pc files for private modules any more, the
conditionals cannot be nested.
amends 6c5d227da, partially reverting aa20e7f9d.
Task-number: QTBUG-49763
Change-Id: I2578c83e0c767b6533abdb26bf4e8bcc8c416ef1
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
judging by the history, this was only ever a workaround for poor rpath
handling. we're supposed to be over that.
Change-Id: I85601493a05a76ead999e707a2d2e9a430610981
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
proper prefix builds don't have the redundant .dlls in bin (the copy
step is simply omitted), so this is broken. the change would have to be
done atomically with making DLLDESTDIR sane.
This reverts commit 9b2e98245a.
Task-number: QTBUG-50065
Change-Id: I9ce0a2d1147a1a2d4bd2f22e619d5c737864a637
Reviewed-by: Romain Pokrzywka <romain.pokrzywka@gmail.com>
Reviewed-by: Tim Blechmann <tim@klingt.org>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
this is just an optimization/clarification: variables which are known to
be never empty (like PATH) can be extended with less convoluted code.
Change-Id: Ib365bbec8301673ed1c874979b4de19bc983dab1
Reviewed-by: Romain Pokrzywka <romain.pokrzywka@gmail.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
the primary purpose is making env var prepend mode work for unset
variables on windows. this is achieved by using a conditional and delayed
variable expansion. however, the latter is disabled by default and can
be locally enabled only in batch files. therefore, write wrapper scripts
and substitute them for the actual commands. we do this also on unix,
both for consistency and simply because the commands look much less
confusing.
this change is slightly backwards-incompatible, as invoking
qtAddToolEnv() multiple times on the same command will now make a total
mess. also, invoking it on a command that contains 'make' macro
expansions isn't a good idea, so testcase.prf needed an adjustment. the
function is an undocumented internal, so Nobody Should Care (TM).
this also reverts 80ebedecf9, as it's obsolete now.
Change-Id: I8394b77868b495abcf27b688996ca74c40b80994
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
That API has been available for WinRT and Windows
Phone for some time now. By using it to get the
machine name and for hostname resolution we can get
rid of some winrt-only code and use qhostinfo_win.cpp
on WinRT and Windows phone as well.
Additionally the required capability was added to
tst_qhostinfo so that this auto test can be run without
any manual editing.
Change-Id: I63fa5521bf8cdb0c919bd5a0100ea977c865622a
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
CMP0054 changes CMake behavior wrt. interpreting quoted arguments in
if() statements. This change ensures that CMP0054 dev warnings are
never emitted no matter how polluted the environment, e.g. even
if the variable ${5.5.1} is defined and no matter whether CMP0054
is set to OLD, NEW or undefined.
Change-Id: Iee008497b333e2db23fb1adbf8b02252314ffa8a
Reviewed-by: Kevin Funk <kfunk@kde.org>
Reviewed-by: Stephen Kelly <steveire@gmail.com>
Recent versions of Qt have apparently added sufficient numbers of
headers that the command lines used to spawn a custom header-
parsing tool, started overflowing Windows' maximum command-line
length.
This change restructures the mechanism to use a GCC-style command-
line arguments file rather than passing filenames all directly
in the argv[] vector.
Although QNX is the usual ELF target whose cross-build is supported
on Windows, the mechanics introduced in this patch happen to affect
all other ELF Unix systems' builds too.
Change-Id: I5a7383cf9f2ebf9dffde8dbfdcdeca888265e085
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the variable is later re-used by qtPrepareTool(), so the tools used to
build the tool would get excess variables passed.
Change-Id: Ib1bdd2211b4a8615e2be9ba0310822f373f5efb0
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
qtPrepareTool() does it anyway, so this saves repeated manipulations.
for now, this is just nicer, but soon it will be a requirement.
Change-Id: I5184e0e4597c6d5a4d7dd4cc4d81e7f742a79fc8
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QFINDTESTDATA is already prepared to find it there.
Change-Id: I467392786ce6bcfbf1bd0b6079f60c9df06834b1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
A minimal device spec that can be used to build for arm devices.
Change-Id: I4c9949d8cc59ad534fc7617034f6beb40d6a987e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If CROSS_COMPILE is set on a Debian multiarch platform, then PKG_CONFIG
should be set the same way as the other cross compilation tools.
Change-Id: Id359a6bbdcbf8a136a0268a82301fc086a2adcfe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The qt_poll function calls recv to query whether fds marked by select
as readable should be marked POLLIN or POLLHUP in the pollfd structure.
On many platforms such as QNX this requires extra link-time libraries
which were not previously required by QtCore.
While the qt_poll function is intended as a fallback mechanism only for
those platforms which do not implement poll natively, the function was
compiled unconditionally whenever QT_BUILD_INTERNAL was defined, e.g.
in developer builds.
Additionally the function was included on those systems that define poll
in system headers so that configure determines build-time availability,
but do not define _POSIX_POLL > 0 or indicate POSIX:2008 compliance via
either the _POSIX_VERSION or _XOPEN_VERSION macros. On those systems a
sysconf query for _SC_POLL was performed to determine at runtime whether
to call the system poll or qt_poll.
Both of these cases are in fact counterproductive. In the first case the
sole consumer of the function is a single manual unit test. In the
second, to my knowledge no platform requires the runtime fallback.
Despite that, we were forcing an extra dylib in both cases.
Both cases are fixed by 1) moving the implementation into its own file
for the unit test to include and 2) dropping the dynamic fallback if
configure determines availability of poll at compile-time.
This also reverts commit 1377709711, which
added -lsocket for QtCore on QNX.
Change-Id: I2dd10695c5d4cac81b68d2c2558797f3cdabc153
Reviewed-by: James McDonnell <jmcdonnell@qnx.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That implies we need to differentiate between a variable set but empty
and an empty variable. GCC, Clang and the Intel compiler accept -msse2
on 64-bit builds without warning (they also accept -mno-sse2), but the
Microsoft compiler does not have that option.
Change-Id: I54233388ba10994996ae3e749fd829085e8fd7b7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This should help improve the cleanliness of our source code, including
compliance with the C++ standards. They apply to all of our code except
examples (they don't load qt_common.prf).
Change-Id: Ia0aac2f09e9245339951ffff13c94663c1901766
Reviewed-by: David Faure <david.faure@kdab.com>
no idea why it was limited to linux. the variable is already empty on
platforms which don't support it anyway. also, for plugins, it's
consistently enforced as well.
Change-Id: I117f4988a2e301ca98cdc088188d6f8c44ea0ba5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
qt5 qmake is perfectly capable of complex expressions on the LHS.
Change-Id: Ibf8c82a4aa1a419895c6012610269e1cc9ca93ab
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Whenever a qml plugin is made static, the qmldir and other related
files need to be compiled into the resources, so they can be found
in the import path. By using qrc:/qt-project.org/imports, we can
have this taken care of automatically for us via the build system,
leaving us to just ensure that it is initialized in the code.
Task-number: QTBUG-35754
Change-Id: Ifa7e2a66fd78dc6713dd7a8661ea2c155b174d35
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is needed to be able to use Qt (with dynamic ANGLE) in a plugin
while the host runs a different version of Qt (and ANGLE).
In addition to changing the LIBEGL_NAME and LIBGLESV2_NAME variables
you also need to update the value of the LIBRARY definition in the
.def files for ANGLE:
qtbase/src/3rdparty/angle/src/libGLESv2/libGLESv2[d?].def
qtbase/src/3rdparty/angle/src/libGLESv2/libEGL[d?].def
Task-number: QTBUG-48431
Change-Id: Idd00d039ba3e20cc0ec7496bee36ed1c90383b0d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
[ChangeLog][Platform Specific Changes][OS X] Configure with -no-rpath
will now yield Qt dynamic libraries and frameworks with an absolute
install name (based in -libdir).
OS X package managers like Homebrew install Qt in a fixed location. This
change simplifies deployment for such package managers and is consistent
with the default expectation on Apple platforms for libraries with a
fixed location to also have absolute install names.
While a relocatable installation (the default) also works in this
scenario, it requires all software that depends on Qt to be aware of
this and to embed a suitable RPATH into application binaries (which is
not automatic for non-qmake builds). This might not be true for some
select fallback search locations, but as package managers on OS X tend
not to use those, embedding an RPATH becomes practically mandatory. In a
default Homebrew installation, Qt is configured such that the frameworks
end up in /usr/local/Cellar/qt5/<version>/lib and that will be later
symlinked to /usr/local/opt/qt5/lib, both of which are not searched by
the dynamic linker by default.
Task-number: QTBUG-48958
Change-Id: I4395df98771e06a2ce8a293d11dc755bdc50757f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Visual Studio version specific changes have been added to msvc-
desktop.conf which is not used in WinRT or Windows Phone related builds.
Hence take a similar approach to gcc and introduce msvc-base to be used
by all configurations for common settings.
For WinRT this will only be applied to msvc2015 and later on to not
introduce any regressions or behavior changes for previous versions.
Change-Id: Ib1a4d539d46d788470c00cb5969fee74a803bd67
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
don't install the module .pri file into qtbase even when doing a
non-prefix build.
this has no effect on modules built as part of a top-level build, as
they announce themselves via .qmake.super anyway.
however, modules built separately become unavailable unless QMAKEPATH
or QMAKEMODULES is set. this is deemed not relevant by the original
audience of this feature (the qtwebkit team).
Change-Id: I14c170b2c5dbb99608939aef1a541563d5b755d9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
longer term, the redundant .dlls from the libdir will hopefully
disappear. short term, this is a workaround for CI brokenness.
Change-Id: Ia30173355f3aca222d4ca40e7a38c2cf535bbc03
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The xcodebuild tool only supports the install action for devices, not
for the iOS simulator platform.
Change-Id: I47e8bb7d44962bd4a433a314fa9d315ed3683ca6
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
