Those classes will not have relations anymore in Qt6, so they need
separate streaming operators. Writing of multi maps/hashes requires some
additional care so that restoring keeps the order of how iteme have been
inserted.
Change-Id: If41d0c5c24962764a2cb81bd2de9e2fadf1a2b63
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It was more complex than it needed to be and was a test of QString,
not of QLocale. This leaves tst_QLocale::negativeZero() available to
now test how QLocale handles negative zero.
Change-Id: Ic9aae250c29f579e6d60fba8404b38673a3b489f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We have long (since 4.5.1) coerced it to lower-case, for no readily
apparent, much less documented, reason. CLDR says most locales use an
upper-case E for this - let's actually use what CLDR says we should
use.
The code that matches the exponent separator was doing so
case-insensitively in any case; that needed adaptation now that the
separator's case isn't pre-determined; and, in any case, should have
been done using case-folding rather than upper-casing. In the process,
removed some spurious checks for "'e' or 'E'" in the result, since the
exponent separator is always represented by 'e' (and an 'e' might also
be present for the separate reason of its use as a beyond-decimal
digit representing fourteen).
[ChangeLog][QtCore][QLocale] QLocale::exponential() now preserves the
case of the CLDR source, where previously it was lower-cased.
Change-Id: Ic9ac02136cff79cb9f136d72141b5dbf54d9e0a6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QTypeRevision is needed to encode the value of the new two-argument
Q_REVISION(major, minor) macros. Those, in turn are necessary because
the minor version resets to 0, and we need to take the major version
into account when stating revisions for Qt classes.
Task-number: QTBUG-71278
Change-Id: I63eff6eab7d6e4f8f32b359a216767c98947a106
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
A couple of tests in the QHash autotest could iterate beyond
end(), leading to undefined behavior. This is bound to crash
with the new upcoming QHash implementation.
Change-Id: I977fc939e6e472f05b7cb2fa0a79c2d5f8782f45
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Remove support for reverse iteration over a QSet.
Change-Id: I1e9c986a118aea4ebeb7fcdceb41e9ce6593cdb6
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QHash and QMultiHash are separate classes in the future, and
the iterator is not random access.
Change-Id: I7e1a4162ca964001c8da81a2fd7c41ccae27bdb3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Split QHash and QMultiHash, and get rid of some compiler warnings.
Change-Id: I48991f097f408ad5c1aa349443e26ab816e0b736
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Prepare the test cases so that QHash and QMultiHash are used
as if they were fully independent classes.
Change-Id: Iaf5d65c8f6321ec2edaef490e657b144619655a0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When a new model is set, a valid index is selected. When a model is
reset, this is not the case which is slightly inconsistent. Fix it by
using the same logic to find a valid index when the model is reset
Fixes: QTBUG-80998
Change-Id: I6c167511e199a6664343cf1dc3bcd27c65389bfd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When the tested widget has a focus proxy, then we should check if the
current focus widget is not the same as that focus proxy before setting
it to be the widget that gets focus. This ensures that when back-tabbing
from a widget like QDoubleSpinBox that it will not get stuck inside that
widget and will back-tab to the next correct one.
Fixes: QTBUG-81097
Change-Id: I3f689c7715da7f3ce8c3d2f616041528f5778a2f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When closing a popup (submenu) triggers closing another popup (the menu)
programatically it can happen that QApplicationPrivate::popupWidgets is
destroyed. Therefore we have to check if popupWidgets is still valid
after the focus change event was delivered.
Fixes: QTBUG-81222
Change-Id: Ide3a6897e43f389d396a80d8b158f7c8eb04e3aa
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
There's no point at keep raising errors after encountering the
first malformed attribute.
Change-Id: Idb37e577ea96c3bd850b3caf008fe3ecd57dd32e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is meant to correspond to required properties in QML.
Change-Id: I2645981e13f7423bc86b48370c165b3cfe2aaa62
Task-number: QTBUG-81561
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
If support for regular expression is disabled, fixed string can
still be used.
[ChangeLog][QtCore][QSslCertificate] Add overload of fromPath that does
not make use of QRegExp and deprecate the QRegExp variant.
Task-number: QTBUG-72587
Change-Id: I507d8941cc7d70166da0948375dc421fe5e7d967
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
They are now version 4, which is hopefully the final format,
relying on nothing but QDataStream.
Except for the qshader autotest which tests all the 1..4 versions
and so needs appropriate test data.
Also unifies the batch file naming.
Change-Id: Iec478be86d14dbec7ffb9d5f9b62c14fca5d7c9e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
We don't know which versions these blacklistings actually apply on
unless we actually get macOS 10.14 and 10.15 into the CI and running
tests, so let's start with that, and then granularize the blacklists
after that.
Task-number: QTBUG-75786
Change-Id: Id79642afa50cb20efa2cd209286b6933918d3a4a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Also moves the openglwindow test to the opengl folder, as it makes use of these
classes.
Task-number: QTBUG-74409
Change-Id: Id9f0013cedcc8bd1e87122c005641d7298525045
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
During 556712f511 a small regression was
introduced which set a wrong value for QStyleOptionTab::position.
Fixes: QTBUG-81393
Change-Id: Ie8c66186b1b79c97bf77c7b139e08840233b7b66
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Same as other versions of MSVC
Fixes: QTBUG-80328
Change-Id: I05c5ffe6d36e0cdfb781080a736c90b6a6d4b2ba
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Additional data should also be taken into account when using move
operator and function swap. This is already implemented for move
constructor.
Task-number: QTBUG-78544
Change-Id: I24ba34b0957a8fba7e15a934f2d08222dc95650f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
A new macro that can be added in the header file parsed by moc to tell moc
to include that file in the generated file
Change-Id: I03ad702c3fcd8380371015f226ee4b7456daf132
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QResource] Added uncompressedSize() and
uncompressedData(), which will perform any required decompression on the
data, prior to returning (unlike data() and size()).
Change-Id: Ief874765cd7b43798de3fffd15aa053bc505dcb1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
