1. clang-cl doesn't support "-fno-exceptions", it uses msvc's parameter.
2. some parameters supported by msvc are not supported by clang-cl
and they are causing huge warning message flood, don't add them.
3. use correct optimize parameter for clang-cl.
Change-Id: Idbadf139127143c5fa6c49068588cb26f47da7a2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When linking static libraries, MSVC's link.exe complains about
the unknown parameter "/INCREMENTAL:NO" and output a lot of warning
messages about this. This doesn't happen when it's linking exes
or dlls.
The situation is a lot more worse when we are using clang-cl.
clang-cl will print some error message like it can't find a
file named "/INCREMENTAL:NO" and just stop compiling. It seems
clang-cl treat unknown parameters as input files.
Fixes: QTBUG-87875
Change-Id: I37ed29de082b0258e81494db54f275417ab42708
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The QT.<module>.DEFINES assignment in pri files needs to take into
account the module name when computing the define name. This is the
MODULE value that qmake specifies.
In CMake that would be the value of CONFIG_MODULE_NAME.
Previously the value of the define was computed in
qt_internal_module_info() without taking into account the module name.
While qt_internal_module_info() ended being used also for plugins and
other target types, the defines computed by it were meant to be used
only for Qt modules.
Thus remove the <result>_define assignment from
qt_internal_module_info and move its computation directly into
qt_internal_add_module, taking into account the value of
CONFIG_MODULE_NAME.
The only other use of module_define was in qt_internal_add_plugin but
that was merely a long overdue copy-paste error, qmake doesn't
propagate QT_FOO_LIB defines for plugins.
As result, a define special case in testlib is not needed anymore,
because the define is now computed properly.
Finally, QT_FOO_LIB should not be used while building the Qt module
itself, so instead of using PUBLIC_DEFINES option of
qt_internal_extend_target, use target_compile_definitions(INTERFACE)
directly.
Change-Id: I4d44f7461bac2f0c09aec3e995d02dfe36e00883
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Makes the diff between Qt 5.15 and 6.0 easier to read, to see what's
missing.
Change-Id: Idf8aa17b3ab8494f6855c172665423a53ca8a024
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We do not have host-specific INSTALL_*DIR variables in the CMake build.
It is equivalent to a qmake build with host prefix = prefix.
Change-Id: I65731e6038508b6c28e3f2819b624ba19abfc82a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The value of this variable must be exactly "mkspecs" or end with
"/mkspecs".
Change-Id: I39f83e9660794dfe23f5fd39fb1084b87ba1f140
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The value of this variable - whithout the mkspecs part - is what's
called the host data dir in Qt5.
Fixes: QTBUG-87681
Change-Id: I3dfeed17e8a614476aef4d9c651a141ce62e6551
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We must escape backslashes in CMake code that's to be evaluated and in
the arguments we read from config.opt.
Change-Id: I65d033c77f71888974983aa3d834acb2fe89f3fb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Passing arguments with equal signs was broken for configure.bat and
qt-configure-module.bat. An argument FOO=BAR was split at = and written
as
FOO
BAR
to config.opt, breaking every attempt of assigning CMake variables.
We must not iterate over %* in batch files to avoid splitting arguments
at equal signs. Instead, pass %* unmodified to a CMake script that
writes config.opt.
Fixes: QTBUG-88019
Change-Id: I7c743a206961d1ed168f2313f864905f6b345b49
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In a subsequent change we will call another CMake script from
qt-configure-module.bat. Write the location of qtbase/cmake into the
generated scripts instead of the path to QtProcessConfigureArgs.cmake.
Change-Id: Ie333b16d310b215c6e49efa27740c7525453d28f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMake considers ON/OFF as booly string values regardless of the case.
Make the value comparison in QtFeature.cmake case-independent.
It's now possible to build Qt with '-DFEATURE_gui=off'.
Fixes: QTBUG-87948
Change-Id: I3d948e8219ad9728414803c8c4cd756034073b46
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Rolf Eike Beer <eb@emlix.com>
Previously we determined if a library represented by an absolute path
is a Qt module by checking if it's located in the build dir of the
current repo.
That is not sufficient for non-qtbase prefix builds, where
a Qt module might link against both a module in the current
build dir and in the prefix dir.
Detect such cases, and rewrite the absolute paths to relocatable paths
(either framework flags or paths starting with $$[QT_INSTALL_LIBS].
This should fix building examples with qmake that use QtQuick.
Fixes: QTBUG-87840
Change-Id: Icaf8f1a7c66292c80662fd0d5771a5a1628a9899
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add an EXTRA_CMAKE_FILES argument to qt_internal_add_tool()
that allows tools to install an additional Macro.cmake file.
This is modelled after similar functionality in qt_internal_add_module.
Task-number: QTBUG-87870
Change-Id: I80838b8966f1018fdd379b1da877b6bc418de075
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Fixes a regression introduced in commit 748b3b9c89 for builds
that are both not a QT_SUPERBUILD and not QT_WILL_INSTALL.
Change-Id: I52b920176a2696fa6206b89b2b69ae1a7f3fbc25
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The top-level prepare_docs target is supposed to run before the
generate_docs target.
The repository-level targets like prepare_docs_qtbase now also run
before their respective generate targets.
To achieve that, several intermediate targets had to be introduced.
The dependencies for top-level generate_docs look like this:
/--> generate_top_level_docs_Core --\
generate_docs ---> generate_top_level_docs_Gui -----> prepare_docs
\--> ... --/
The dependencies for repo-level generate_docs_<repo> look like this:
/--> generate_repo_docs_Core
generate_docs_qtbase ---> generate_repo_docs_Gui
\--> ...
generate_repo_docs_Core --\
generate_repo_docs_Gui -----> prepare_docs_qtbase
... --/
Analoguous for qch_docs.
And last but not least, the module-level generate_docs_<module> depends
on prepare_docs_<module>, just like before.
The strangely named top-level install targets have been renamed to
install_html_docs, install_qch_docs and install_docs.
The html_docs target is now merely an alias for generate_docs.
Apart from prepare_docs, the top-level targets do not depend on the
repository-level targets anymore. Targets that are just an alias (docs,
install_docs, ...) have been re-defined to depend just on the respective
top-level targets.
Fixes: QTBUG-87758
Change-Id: I24466d3a252d518a30a2064bf876be881c46231f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The value is useful for QPA plugins built in repos other than qtbase,
to decide if it should be a default plugin or not.
Currently useful for qtwayland.
Also export a qmake value assignment when doing static builds, just
like src/gui/configure.pri does.
Change-Id: I1253f1a7e178b24b16e2615ba20d1e92b0b87b1a
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Otherwise we get error messages from CMake.
Change-Id: I374b87e38550062b841b7eacf5fbb6bb5ccbdbde
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Allow CMake for Android to use ANDROID_NDK_ROOT to deduce the path for
QT_CHAINLOAD_TOOLCHAIN_FILE instead of the user providing it manually.
Change-Id: Ida728011d5ca8d5a723d341ea77b173e8f105f8c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is meant to be called by our CI instructions to build standalone
tests of a Qt repository.
Currently it just calls qt-cmake with
-DQT_BUILD_STANDALONE_TESTS=ON, but it might contain more things in
the future.
The script also simplifies configuring standalone tests locally, due
to not having to remember the name of the magical variable.
Change our CI instructions to use the new script.
Change-Id: I6bc02b4e94adc9d0d05fecb0fe70a561043271f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
With the introduction of the new 'default_qpa_plugins' custom target,
a target dependency cycle occurred in qtwayland:
qtwaylandscanner -> default_qpa_plugins -> a wayland qpa plugin ->
WaylandClient -> qtwaylandscanner
The issue is twofold:
- default_qpa_plugins accidentally depended on non-qpa plugins.
- All qpa plugins were enabled by default, including the wayland ones.
Fix the default_qpa_plugins target not to depend on regular non-qpa
plugins.
Also fix qpa plugins not to be enabled by default, but instead only
choose one qpa plugin to be the default (via evaluating the
DEFAULT_IF) condition.
Amends df9c7456d1
Change-Id: I22cd2c72f6b75be54263fd21097258bd179e3616
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The way we detected whether SysrootifyPrefix needs to be set was
incorrect.
We checked if extprefix == prefix => SysrootifyPrefix should be
true. But that was previously always the case for a non-prefix build,
which means it was not possible to build apps (due to qmake expecting
to find include dirs in the sysroot, despite the non-prefix Qt not
being installed anywhere into the sysroot).
Instead we should do what qmake does. Only set SysrootifyPrefix to
true if extprefix was not provided and a sysroot is available.
To make it work for iOS and Android, the sysroot detection code had to
be moved earlier than the SysrootifyPrefix detection.
Task-number: QTBUG-86053
Change-Id: Idcc1260a675fb2ef9ae27fc9dc42a68b30f763b8
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The html_docs target does not need to call QDoc a third time as
both its dependencies already do that.
With qmake, html_docs did invoke QDoc if CONFIG did not include
'prepare_docs', but none of the Qt modules used that configuration.
We can manage without it for now.
Fixes: QTBUG-87751
Change-Id: I45d2d06006c566c431ae41d7f3a06d6b809987f2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
For top-level builds it's desirable to have "ninja generate_docs" build
all tools needed to generate the documentation.
This is problematic since the doc-generating targets are created before
the doc tool targets. Thus, we must defer the dependency connection if
the doc tool target is not yet available.
This patch adds the functions qt_internal_defer_dependency and
qt_internal_add_deferred_dependencies.
Change-Id: Ica940b80882e67cb0e0943e95541f7f4d1885948
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Instead of propagating the deprecation wranings, we compiled all code
with -Ddeprecations.
Change-Id: I0233ddc85bdbdcb93d366073b2cea5d47bdbe52a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
qmake treats internal modules as just the regular module file,
but with a _private suffix, as opposed to the current cmake
logic, that treats it as the private module file, resulting
in missing e.g. the Qt.foo.module entry.
Change-Id: Id55ca4c23921656d5abfd1d0fdf6430d4fe120bf
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch allows in top-level prefix builds to build Qt and to generate
the documentation without running cmake --install first.
For top-level builds we now always use the qdoc binary from the build
directory, not the installation directory.
We also have to copy the global doc files to the build directory to make
them accessible to the generate_docs target.
Change-Id: I2251603418fc3df9a21c7f2892789e9ff6c8cc21
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's not sufficient to pass -I{prefix}/include when doing the header
clean check.
We need to propagate all target include directories and compile
definitions, and also the compile flags for good measure.
For macOS frameworks we also need to explicitly pass an -iframework
flag (qmake passses -F instead), to ensure that <QtGui/qfoo.h> style
includes are found when building other repos than qtbase.
Task-number: QTBUG-82615
Change-Id: I76d12340bc01c5c948ff04df9a3df384dcb7e076
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
This ensures ccache or sccache is used to cache the compilation of the
headerclean checks.
Task-number: QTBUG-82615
Change-Id: Ie944eb1d643e7271551c9f8337609741e419e9d8
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
It appears there's a difference between the chosen macOS compiler path
in the CI versus the compiler path on my local machine.
In the CI the chosen compiler path ends up 'being /usr/bin/clang++'
whereas for me locally it's
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/c++
For some reason the headersclean commands succeed in the CI, but
locally they fail for me saying that standard library includes can not
be found, unless an explicit sysroot flag is specified.
I assume that in the CI the '/usr/bin/clang++' compiler shim chooses some
implcit sysroot, whereas the longer Xcode compiler expects an explicit
sysroot.
It's probably also affected by the fact that in the CI we pass an
explicit CMAKE_OSX_SYSROOT to a non-standard Xcode location e.g.
/Applications/Xcode11.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk
Note the '11' in the Xcode app name.
Locally I don't pass a custom CMAKE_OSX_SYSROOT, and my Xcode is
installed in a regular location e.g /Applications/Xcode.app.
The sysroot flag and path is added to regular CXX compilation rules
inside CMake's core (in cmLocalGenerator.cxx).
Reuse the same variables that CMake uses and add them to our headersclean
command rules.
Task-number: QTBUG-82615
Change-Id: Ic03ea27e39471f5fa168eb5970bf3d3f1d1be251
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Add 3 new convenience custom targets:
'qt_plugins', 'qpa_plugins' and 'qpa_default_plugins'.
Additionally, if we detect that an internal executable / test
links against Gui, add a dependency on the 'qpa_default_plugins'
custom target, so that if a developer configures Qt for the first time
and then calls ninja 'tst_foo_check', we ensure the test will launch
successfully because the default QPA plugin will also be built.
Change-Id: If6dd70844b5effdf8a293f65f8785855cc85b132
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For example, we must not prepend -l to -pthread, -framework and -lfoo.
Fixes: QTBUG-87760
Change-Id: Ie1bc7a76183c2c4980c519b5f23dde6c47ec85a9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
...instead of qt-cmake-private.
Also, add ".bat" on Windows.
Change-Id: I2aa94ac76f2dadfb8e94d68b19bb379b3d45a93d
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The variable to check for a Windows host system was mis-typed.
Change-Id: I25b14b80d25bfec0c1a00e99833520b6fb6a4b02
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This makes the diff-ing of the config summary between qmake and CMake
builds correct.
Change-Id: I720b69572c23afd78e6d0bea6cdf0740980c3b36
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
In configure.json files we have inputs with dashes, e.g.
bundlex-xcb-xinput. In configure.cmake files, these are read in their
normalized form, e.g. INPUT_bundled_xcb_xinput.
Normalize the input names in QtProcessConfigureArgs.cmake like we
already do for feature names.
Change-Id: Iece414d40a0e9e2920580f2fda68e25cd32674c9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On a mac that can build all of Qt with CMake, Ninja, and command line tools,
there should be no warning just because a build tool that
won't get used is not available.
Turn the warning into an informative message instead so that IDE
integrations (such as VSCode's CMake integration) don't flag warnings.
Change-Id: I250c0e5dd0633b36ff2b690a52ba7ce3ceb22218
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
...for QT_BUILD_TOOLS_WHEN_CROSSCOMPILING.
qt_internal_export_additional_targets_file now gets two lists of target
names when run from qt_export_tools:
- TARGETS containing actually existing targets, and
- TARGET_EXPORT_NAMES containing the target names as they appear in the
additional target info file.
Operations that require actual targets are run on the TARGETS, in the
additional target info file only TARGET_EXPORT_NAMES are written.
This distinction is required for the case where the host Qt lacks a
tool that is built in the target Qt.
Example: host Qt is built with DEVELOPER_BUILD=OFF, target Qt is built
with DEVELOPER_BUILD=ON. Then the host Qt lacks qmljs, but it is built
in the target Qt. TARGETS contains qmljs_native, and
TARGET_EXPORT_NAMES contains qmljs.
Fixes: QTBUG-87693
Change-Id: I615aed996bfcbe654274defcda8c1cb2cc4b7b4e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Do not append "/qtbase" to QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX
when doing a top-level build. The "/qtbase" suffix is already part of
this variable's content.
Fixes: QTBUG-87682
Change-Id: If1c2075dc58d4b07a4c3a1eed12cc3336c5dc8e6
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Do not print warnings for the configure arguments -commercial,
-opensource and -confirm-license. We're not removing the arguments yet
to keep existing build scripts working.
Fixes: QTBUG-86096
Change-Id: Ieb63e2f2b81c022e8559cde6c3e0be0b8ce655ca
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The use-case is relevant for other platforms as well.
Now that Qt has a module system we can also replace a lot of the
hand crafted logic for linking with simpler constructs.
Change-Id: Ib6853aaf81bfea79c31f2de741d65b4b56f23ef6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Some of them have a different (hopefully better) name now.
Some are marked as Technical Preview.
Some are renamed to be internal.
Marking add_qt_gui_executable as TP with the intention to un-TP it
after we rename it and change its behavior as discussed in the API
review meeting.
Additional changes to add_qt_gui_executable and qt6_add_resources have
been filed as separate tasks that will be worked on separately.
See comments on PS1 for details.
Task-number: QTBUG-86827
Change-Id: I56a84a1943b0902bb807310dc620eb381824e8dd
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The Android toolchain file is now autodetected from the location of the
NDK. The NDK location can be specified by setting the CMake variable
ANDROID_NDK_ROOT. Auto-detection of the Android toolchain file is the
only purpose of this variable.
In recent Android SDK installations the path to the NDK is well-known
and can be auto-detected too. If only ANDROID_SDK_ROOT is given, we try
to detect ANDROID_NDK_ROOT first and from that the Android toolchain
file.
Adjust the build instructions in cmake/README.md, and remove the part
where we suggest to set some environment variables that are only used to
create the cmake call.
Task-number: QTBUG-87068
Change-Id: Ia0df5df7651e98979e9cead1cdae7b17ecbc4afb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We want this in order to be able to export constexpr members.
Change-Id: I33ba7964ebee54fe656df983985d8d6fa0b99358
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This needs to map to ECM_ENABLE_SANITIZERS.
Fixes: QTBUG-87316
Change-Id: I9e983728af0ba69fd428944e647f0afae8c61772
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Provide two customization points:
- optionally include a 'qt.toolchain.extra.cmake' file if it exists
and is placed next to the main generated toolchain file.
This use case is mostly for the Qt installer, so that it can create
an extra file with correct installer-provided paths, instead of
patching the toolchain file directly.
- optionally include a file passed via the command line CMake argument
'QT_TOOLCHAIN_INCLUDE_FILE'.
The use case is for application developers that might want to adjust
the toolchain file after the modifications done by the Qt installer.
These options do not replace the existing QT_CHAINLOAD_TOOLCHAIN_FILE
option, which is meant to chainload a platform specific existing
toolchain file (like Android or Emscripten).
Task-number: QTBUG-87068
Change-Id: I956949840f55742cfbd3bc8fc0bd8c6b3f774d3d
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
And wrap the various behaviors into separate functions.
Change-Id: If940351af34e445de050f2b46301de7080b1555b
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Detect an iOS build when either an -sdk option is passed
or when -xplatform macx-ios-clang is passed as a target
mkspec.
Now that CMake 3.17 is released, change the default behavior of the
iOS build to configure with simulator_and_device set to ON, like it
is with qmake.
Update the documentation regarding iOS configuration.
Change-Id: I91aaf706610b8d3c69f1ad4ba9dadee2b1e5db97
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It appears that CMake's Xcode generator default behavior can't really
handle imported object libraries location, which Qt uses extensively
(all the qt_add_resource calls).
Specifically the project fails to configure with the following error
message:
The OBJECT library type may not be used for IMPORTED libraries under
Xcode with multiple architectures.
An issue was filed upstream at
https://gitlab.kitware.com/cmake/cmake/-/issues/21276
In the mean time, it looks like it's possible to work around the issue
by setting XCODE_EMIT_EFFECTIVE_PLATFORM_NAME global property to OFF.
This needs to be done before the very first project() call, so we do
it in the generated Qt toolchain file.
Note that the workaround only works if the CMake project is configured
with a single architecture given to CMAKE_OSX_ARCHITECTURES.
If multiple arches are given, it will fail with the same error
message.
Fixes: QTBUG-87198
Change-Id: I2556ae28b2fc2d9cfe464a5acf9c4fcbaf01b654
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add info whether Qt was an infix built, and whether the reduce_exports
feature was enabled. These variable were set before in
Qt5CoreConfigExtras.cmake.
Change-Id: Id077763cfffd5ee6f1a7a28d04cf92dc46390c54
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Add an abstraction over Qt::WinMain (aka qtmain.lib) and
iOS's runtime linker entry point (_qt_main_wrapper).
The Core target will now link against the Startup target on all
platforms, instead of just WinMain on Windows.
The creation and linkage interface definition of the Startup target
is done at find_package(Qt6Core) time via the private call of
_qt_internal_setup_startup_target().
This will add automatic linkage of WinMain to executables marked with
the WIN32_EXECUTABLE property on Windows.
As well as the addition of the '-Wl,-e,_qt_main_wrapper' linker flag
when linking iOS executables.
Qt users can opt out of this behavior by either setting the
QT_NO_LINK_QTMAIN property or variable. This is in line with
Qt 5 behavior.
Task-number: QTBUG-87060
Change-Id: I7d5e9f1be0e402cf8e67e6f55bfd285f9e6b04f4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
As there is no other way of obtaining information about Qt's paths at the
moment, windeployqt is still querying qmake for these information. For a
cross compiled Qt, the proper target mkspec has to be set in this case.
Change-Id: I0b7b7719c9055d432576185ac4f7572a5ba1dd6b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When loading the tool packages from the host Qt we must ignore
QT_NO_CREATE_TARGETS. Otherwise tool targets like Qt6::moc are not
available.
Task-number: QTBUG-85080
Change-Id: I2c8c8e68863f28a4f1d9cd2f70090455c49d8df2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Tests were never built by default, except for -developer-build.
Examples were build, but aren't anymore by default if you
run cmake directly.
Let the default be figured out by cmake, and only set
BUILD_EXAMPLES and BUILD_TESTING if the user has
expicitly passed them via -make or -nomake.
Task-number: QTBUG-87217
Change-Id: I37321d96cc1e9e184a711a858c860b0205d5b74f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
3.17.0 is released since a while. ANyhow, the requirement for
3.17 for simulator_and_device builds is already mentioned
at the start.
Change-Id: Ic8813bb60b010feb97a47b878124c3e75658813d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
All usages should be replaced with qt_internal_add_executable instead.
This should fix configuration failure of benchmarks and manual tests.
Amends e0c62a48b8
Task-number: QTBUG-86815
Change-Id: I0791d849998ed9517e32f699d843367949b97cb9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This variable can be set when using qt-cmake[-private] to override the
CMake toolchain file that is chainloaded by Qt's toolchain file.
Task-number: QTBUG-87068
Change-Id: Id529408381e4174becda1ba07a489535c8cf1314
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
These were introduced in
675805e9eb and
b9c85d6b0e
They should be exported if they were set.
Change-Id: Ieec565980ba148f675f84dcdd7c19894e349085f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The value is used by mkspecs/features/mac/default_post.prf and
ultimately by xcodebuild to decide which arch and SDK to build
against.
For a simulator_and_device build, no value needs to be set as far as
I can see.
Task-number: QTBUG-87218
Change-Id: I41992bec6b16aadfd87c3f7c10653a6094e76d3e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If no mkspec is provided, we default to the macx-clang-ios mkspec when
building for iOS. This ensures that the wrapper qmake script is usable
for building iOS apps with qmake.
Task-number: QTBUG-87218
Change-Id: Ib02b580c8382b04455c9f820163062591d14a15b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Introduce a new feature called 'FEATURE_msvc_obj_debug_info' which
should allow usage of sccache for Windows MSVC configs.
Enabling the feature will replace the default '/Zi' compile flag
that CMake sets in Windows-MSVC.cmake with '/Z7'.
This ensures that the debug info is placed into the compiled object
file instead of placing it in the compilation .pdb file via
mspdbsrv.exe.
The final pdb file will still be created for shared libraries and
executables due to the linker '/debug' flag.
Static libraries will not have a .pdb file, instead the debug info
being embeeded in the .lib file.
The downsides of using '/Z7' are more disk space usage, slower
link times, more memory used for linking because the linker needs
to deal with more symbols.
The upside is that caching each indepedent cl.exe call is possible.
This is what Chromium uses with goma, and Firefox with sccache.
We're not enabling the feature by default to allow easier
testing (and switching it off) in the CI if it proves not to be
feasible.
It will probably have to be disabled at least for building
qtwebengine due to high memory requirements.
Task-number: QTQAINFRA-3934
Change-Id: I89e0e57995e938a780be318d1faec700194aa93f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Enabling it will force usage of '-O3' flag when building Qt.
If the platform has no '-O3' flag, use '-O2' as a fallback.
Task-number: QTBUG-86866
Change-Id: If13f7de954ba5c01dc9634f06a85529828fe90a9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Introduce a bunch of helper functions to manipulate compiler
flags and linker flags for the
CMAKE_<LANG>_FLAGS_<CONFIG>
and
CMAKE_<LINK_TYPE>_LINKER_FLAGS_<CONFIG>
CMake variables.
These variables can be assigned and modified either in the cache
or for a specific subdirectory scope, which will apply the flags
only to targets in that scope.
Add qt_internal_add_optimize_full_flags() function which mimics
qmake's CONFIG += optimize_full behavior.
Calling it will force usage of the '-O3' optimization flag on supported
platforms (falling back '-O2' where not supported).
Use the function for the Core and Gui subdirectories, to enable full
optimization for the respective Qt modules as it is done in the qmake
projects.
To ensure that the global qmake-like compiler flags are assigned
eveywhere,
qt_internal_set_up_config_optimizations_like_in_qmake() needs
to be called after Qt global features like optimize_size and
optimize_full are available.
This means that qtbase and its standalone tests need some special
handling in regards to when to call that function.
Task-number: QTBUG-86866
Change-Id: Ic7ac23de0265561cb06a0ba55089b6c0d3347441
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Supports installing linker generated debug info for shared libraries
and executables, as well as compiler generated debug info for static
libraries.
Works with Ninja Multi-Config as well, with the caveat that the files
are installed optionally, aka the install rule will not error out if
a pdb file is not present. This is necessary, because it's not
possible to create per-config install rules properly.
Fixes: QTBUG-87006
Change-Id: I95e91a6557eb0ee0f882103be54cd38795c349f7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Implement the last remaining Android-related configure options for the
CMake build.
Print warnings for options that have no equivalent in the CMake build.
Let -android-ndk automatically deduce the CMake toolchain file, and
error out if that fails with a hint how to fix the situation.
Task-number: QTBUG-85373
Change-Id: I8399e5334ae0f1f6634e381775a308d34f7c482b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qtConfAddWarning was missing, despite being used.
All of the three qtConfAdd* functions take multiple parameters and pass
them to the CMake's message() function.
Change-Id: I1fad46c6fd00b2e733b32cda482bbf1341ffc63f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This option maps to FEATURE_reduce_exports. The feature is on by
default, except for MSVC. The reduce_exports configure test is not used
in the CMake build.
The <LANG>_VISIBILITY_PRESET and VISIBILITY_INLINES_HIDDEN target
properties are now explicitly initialized in the
qt_set_common_target_properties function, because we don't have access
to the feature in QtSetup.cmake where the CMAKE_<LANG>_VISIBILITY_PRESET
variables were set before.
Task-number: QTBUG-85373
Change-Id: I378453f0e0665731970016170302871e20ceb4e2
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add some missing versionless functions.
Rename some functions that are not meant to be public API, and their
usages.
Task-number: QTBUG-86827
Change-Id: Ifb66c04cd7598d83fe80c01a92ab2d269ebaf396
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The CMake build uses the WARNINGS_ARE_ERRORS variable, and the feature
warnings_are_errors exists only in the qmake build.
Change-Id: I1e548b30b210b3dd1b2f23041d490a981312f4ba
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
HostInfo is used in places whenever QT_HOST_PATH is set, regardless
whether CMAKE_CROSSCOMPILING is set or not. Make sure that HostInfo
is available when QT_HOST_PATH is set.
Change-Id: I39763a61d77e97dc9c4cc3875bce4deb942f870a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add qt6_android_get_sdk_build_tools_revision() function to get the
Android SDK build tools revision, the logic is moved from
QtPlatformAndroid to Qt6AndroidMacros. The update QtPlatformAndroid
header comments.
Task-number: QTBUG-85982
Change-Id: If3e5b46fa583f929a24794792c9d5a52beb83990
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Make name format of QT_ANDROID_DEPLOYMENT_SETTINGS_FILE consistent with
qmake, that is android-${target}-deployment-settings.json.
Task-number: QTCREATORBUG-24678
Change-Id: I2bdb056cf7a82fd83aaf658f3a405a0c9ef05756
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This ensures that we have the configuration-independent IMPORTED_*
properties set on tools.
Fixes: QTBUG-86893
Change-Id: I2b772c21341e6e4631379d4a5a99580ec96909ed
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
To provide the IMPORTED_LOCATION target property we must write
the *AdditionalTargetInfo.cmake file for all debug-only builds, not only
the ones containing a release configuration.
Task-number: QTBUG-86893
Change-Id: I9ecd01483660f434a3f1ea12fa2af756cdcf9932
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It causes issues in our Windows CI, because the strawberry perl
pkg-config is found. And even that one is unusable, due to a bug in
CMake which is tracked at
https://gitlab.kitware.com/cmake/cmake/-/issues/21239
Change-Id: I58816195d35459e8a44c923399c35a4956c222a2
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
By default, when using the Qt6 CMake package to look for components,
the find_package() calls for the components use NO_DEFAULT_PATH to
ensure that CMake doesn't accidentally find system (distro) packages.
Instead we limit the paths to one level up from where the Qt6 package
is.
Unfortunately that doesn't quite work for finding Qt packages that
might have been installed into a different prefix than where the main
Qt prefix is.
This happens when Qt addons are built by Conan, and installed into
a separate prefix.
To allow calls like find_package(Qt6 COMPONENTS ConanAddon) to work
in a scenario as described above, introduce a new variable called
QT_ADDITIONAL_PACKAGES_PREFIX_PATH which can be used to specify
additional paths where Qt CMake packages should be found.
This is similar to previously introduced QT_EXAMPLES_CMAKE_PREFIX_PATH
variable which was meant for a similar case, but only for examples.
Additionally, allow disabling the NO_DEFAULT_PATH option by setting
the QT_DISABLE_NO_DEFAULT_PATH_IN_QT_PACKAGES cache variable to TRUE.
This would allow regular usage of CMAKE_PREFIX_PATH to work, at the
risk that system Qt CMake packages might be found.
Augments 5cd4001bf2
and ffe0889413.
Fixes: QTBUG-86882
Change-Id: Ia8e060cbba6d2a10c3d63d81892f2c71e4236a9a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Make the use of ANDROID_SDK_ROOT consistent.
Task-number: QTCREATORBUG-24678
Change-Id: If967bdc4d252996098fa210cf38429fe075eacb1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
To support finding Qt headers of modules installed into a different
prefix than the main one, add the $import_prefix/include path as a
public include path for each built Qt module. With this, includes like
#include <QtNetworkAuth/QOAuth2AuthorizationCodeFlow> will work.
The macOS framework case is handled automagically by CMake, which
ends up passing '-iframework $import_prefix/lib'.
Change-Id: I02ce9cacf157aab9721c1d6073a377607c5b89c7
Fixes: QTBUG-86881
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Building a user project in Release configuration against a Qt built with
CMAKE_CONFIGURATION_TYPES=RelWithDebInfo;Debug led to the user project
being linked against the Debug Qt libraries. This is especially painful
with MSVC where debug and release runtimes are incompatible.
We now create *AdditionalTargetInfo.cmake files along the
exported *Targets.cmake files that set the IMPORT_*_<CONFIG> properties
to the values of the release config Qt was built with.
User projects built with an unknown
configuration (CMAKE_BUILD_TYPE=ArbitraryName) will link against a
release Qt. This can be controlled by setting the variable
QT_DEFAULT_IMPORT_CONFIGURATION to, for example, DEBUG in the user
project.
Fixes: QTBUG-86743
Change-Id: I12c4b065a9845c7317f6acddab46b649f2732c9e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Consider a Qt module with a 3rdparty library target in
PRIVATE_MODULE_INTERFACE, e.g. XKB::XKB in Qt6::GuiPrivate. Consumers of
GuiPrivate automatically depend on XKB::XKB. In order to do that they
must find_package(XKB ...). As all find_package calls for GuiPrivate are
in the same place as the ones for Gui, this package must be marked as
optional. Otherwise all consumers of Qt6::Gui would have to have the
xkbcommon package installed too.
This patch exports find_package calls for every 3rdparty public
dependency of private modules and marks them as optional.
Change-Id: Ia1eeb09c29927fb6634ef08b477684ed6f123267
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Apparently the combination of the --no-undefined linker flag together
with ASAN when building on Linux with Clang does not work.
Disable --no-undefined flag in such a scenario. Note that linux-clang
mkspec doesn't add that flag at all, which is why asan builds work
there.
Change-Id: I6167c757ce4be5d2263311bc84e5fb445b0f7c2d
Fixes: QTBUG-86879
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Rename all libQt6*.so to libQt6*<infix>.so
Task-number: QTBUG-85438
Change-Id: I4b91ffaaec7bea61454b0d3c794c77f2d0868d54
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Android minimum API level for Qt 6 is 23, this reflects that to some
instances that still mention 21.
Change-Id: I996f3ed3af14dca114129351d6ea06afcb8f45f5
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
00a1e5da7e wrongfully added parts of
QtPlatformAndroid.cmake which were removed in
32121e9882. This removed the part in
question again
Change-Id: Ie18968e6a165f52c68f4941ced6add266985bc48
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
All system frameworks use 'A' instead of the major version of the
framework, and Xcode's code signing assumes that the framework version
is 'A' when signing embedded frameworks (FB7323980), so leave the
version 'A'. This is also what Apple recommends.
Change-Id: Idbf2e30e156c3e869da8f75731e568524d9407e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Offer compatibility wrapper functions until we update all of the Qt
repos to use the new names.
Task-number: QTBUG-86815
Change-Id: I5826a4116f52a8509db32601ef7c200f9bd331de
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
When re-doing in a top-level build, we did not read the config.opt file
from the top-level directory.
Also, the config.opt file should not contain the -top-level argument.
This is an internal option, and on Windows, it was already missing. The
information whether we're doing a top-level build is now passed in the
CMake variable TOP_LEVEL.
Change-Id: Iaecd7306a4b6d9ad494684c201cf12f8e74d684b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Having ${QT_BUILD_DIR}/include as include path is not enough for
modules outside of qtbase. They also need to pick up headers from e.g.
Qt Core, which are available only in "${CMAKE_INSTALL_PREFIX}/include"
This amends db21bad936
Fixes: QTBUG-82615
Change-Id: Ib003a66ce039bf1ab6e21a3b1cd86923207eb3db
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We must use the LIBRT location instead of LIBRT_FOUND which is not set anywhere.
I failed to replace this one in my previous patch.
Change-Id: I6e2df82c31e29018d99afec1eecfb80a321fddd4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qt_add_test supports now QT_TEST_SERVER_LIST, which will add the test
servers as docker test fixtures.
The docker server will be started before the test is run, and stopped
after the test is run.
Running the tests in parallel is not supported.
Docker tests are currently only supported on Linux hosts.
Task-number: QTBUG-85034
Change-Id: If3cefe05c5dec19c14b05d2fa8b01a0b6d95e259
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Avoids a linking error when the library is not found as
find_library sets GLESv2_LIBRARY to GLESv2-NOTFOUND
Change-Id: I7ddc15483276e0be0c78b67b760c4d9188758270
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
If a consumer wants to cross-compile a Qt app, they need to provide
the host Qt path location.
When building Qt in the CI we embed the Qt host path into the
generated CMake toolchain file for convenient building of other Qt
modules.
But once Qt is built, packaged and installed on a user's machine, most
likely the Qt host path will not be the same. In such a case, if the
user wants to use the convenience toolchain, they should explicitly
provide the Qt host path via the QT_HOST_PATH and
QT_HOST_PATH_CMAKE_DIR variables.
Show an error message if the values are not provided or don't exist
on the file system.
It's possible that in the future the Qt installer will patch the
toolchain file, or provide additional info, to point to the host
Qt installation so that the user doesn't have to do it manually.
But until that's done, a friendly error message is a good way to
inform the user what they should do.
Task-number: QTBUG-83999
Change-Id: I26291e3c47bb77375f8a5ce7b848c0382a660ca9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Public consumers of the qt toolchain file will most likely not have
their compilers in the same location where they were on the Qt build
machine.
Only set the compiler paths if none was set already, and the paths
actually exist.
This seems to become a trend in the generated toolchain file, and is
only a stop-gap solution.
A proper solution (two different toolchain files) may follow.
Task-number: QTBUG-83999
Change-Id: I7a603af447333a45c65b98e299ee109932d16517
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
A previous change accidentally broke what we we set for
QT_HOST_PATH and QT_HOST_PATH_CMAKE_DIR.
The QT_HOST_PATH variable should use an absolute path as it was
done before.
The QT_HOST_PATH_CMAKE_DIR variable incorrectly used the value of
"${QT_HOST_PATH}" instead of "${QT_HOST_PATH_CMAKE_DIR}".
Fix both of these, and change the names of intermediate variables
to be consistent.
Amends a6a3b82ffb
Task-number: QTBUG-85240
Change-Id: I328a7edee12a13ff793684e8a0a4c2e03204eca4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This reverts commit b0c51f86f4.
The build failure caused by 58c1c6ee5c has
been fixed.
Change-Id: Ic7458d54c7a874588e8b1bfeca61df1842763656
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This reverts commit 6e1a570dc8.
The build failure caused by 58c1c6ee5c has
been fixed.
Change-Id: I67acaa2d1dd5fc88c205b054252be2e6e26898c7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
...and fix the build errors the original change caused.
This reverts commit 127fb8bb55.
Change-Id: I4006b32734a51c5d101dd73c957f81d2a0f84ba1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This reverts commit 58c1c6ee5c.
This lead to configuration errors on some machines, blocking
development.
Change-Id: I744f6cc95fbaa273519ab8fc8fb492b87f5729b8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This reverts commit a3cb002511.
This lead to configuration errors on some machines, blocking
development.
Change-Id: Ibb785c96c7d85692a6e22a73e086119eb571df71
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This reverts commit 3685483c4b.
This lead to configuration errors on some machines, blocking
development.
Change-Id: I309cdd55a8ef64899afcbeca54458d1c6d686951
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Every public dependency of a Qt module results in a find_package call in
the consuming project. But not all public dependencies are mandatory.
For example, vulkan is only needed if the user project actually uses Qt
classes that pull in vulkan headers.
This patch adds the option MARK_OPTIONAL to qt_find_package.
Dependencies that are marked as optional will not produce an error on
find failure.
Task-number: QTBUG-86421
Change-Id: Ia767e7f36991e236582c7509cbd37ea3487bb695
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
...in code. The actual number of calls at runtime does not change.
The reason for this stunt is that we want to replace find_dependency
with find_package at runtime for optional dependencies, and this will
reduce the diff size of the next commit.
Change-Id: I304fdf09c69fea7b6d4adabf515712eb097f8c86
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The find_dependency() macro calls return() on failure, meaning any code
after it will be ignored, thus checking any XXX_FOUND variables after
find_dependency() is pointless.
Fix the places where we use find_dependency() and set the "failed" state
before the call and the "success" state afterwards.
Change-Id: Ia5239c704f02a9bec972210374ffed7808b14055
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is needed for qtwayland, where QtWaylandCompositor package should
call find_package(QtWaylandScanner) in the 'Tools' section of the
ModuleDependencies.cmake file, rather than the regular 'Qt' section.
This takes care of handling host path prefixes, to ensure that a host
package is found even when tools have also been cross-compiled via the
QT_BUILD_TOOLS_WHEN_CROSSCOMPILING option.
Task-number: QTBUG-83968
Change-Id: I4725a630214d053105fb6d2a0f7c5ff6128d13f9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
qt_apply_rpaths takes into account properties like MACOSX_BUNDLE. This
property might not yet be set when qt_internal_add_app is called, but
later.
To handle that, move the call of qt_apply_rpaths to
qt_internal_finalize_app.
As a result, the installed apps will have 2 rpaths, the $ORIGIN style
relocatable one, and an absolute path one pointing to the Qt
prefix/lib. The last one might be unnecessary.
Fixes: QTBUG-86514
Change-Id: I25e0d695c78c8b5703e94c99cc2457f772721456
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
win32-clang-g++/qmake.conf did define
QMAKE_CFLAGS_WARN_ON += -Wextra -Wno-ignored-attributes
probably for the same reason.
Change-Id: I14b66f2555949c03a2ea996923e31f5ec9f7105a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Some repos/modules don't have configure.json files and thus no
qt_cmdline.cmake files. Make qt-configure-module check for the file's
existence. As drive-by fix, surround the configure.cmake's path by
double quotes.
Change-Id: If1a91a0bba0c2fd282cfa08fa6ff2bb20f0a15ba
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
For modules that have MODULE_INCLUDE_NAME set (for example ActiveQt) we
must use this name for the installation rules too.
Fixes: QTBUG-86484
Change-Id: I1b97cf534ea5e41655c7b3fdd0330b2f58356a3a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This configure switch sets the CMake variable
CMAKE_INTERPROCEDURAL_OPTIMIZATION_<CONFIG> per release config to ON.
The feature 'ltcg' is enabled if any of the variables
CMAKE_INTERPROCEDURAL_OPTIMIZATION,
CMAKE_INTERPROCEDURAL_OPTIMIZATION_<CONFIG> are ON.
In order to implement the check, configurejson2cmake had to be extended
to be able to write extra CMake code before and after the feature
definition. This extra code can be added to a feature mapping below the
keys "cmakePrelude" and "cmakeEpilogue".
Task-number: QTBUG-85373
Change-Id: Ia2eb907edcf087f137977a9b090705397f83eb05
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Add a convenience script to configure a Qt module separately.
This script reads and interprets the qt_cmdline.cmake files of the
Qt module to be configured and eventually calls qt-cmake-private.
Example usage:
<install-prefix>/bin/qt-configure-module <source-root>/qtdeclarative
-qml-network -- --trace-expand --trace-redirect=cmake.trace
Change-Id: I026f1a050cd3f4df740611c32ba8c03161bba7a3
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Make this file parsable by tools that are less lenient than github.
Triple-backquotes are for fenced code blocks. Inline code uses backticks
(or double backticks if you have code with backticks).
Change-Id: Ic49d946fbcaa6f7e97702eadf4a0b0c726fc3217
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If '-make examples -no-compile-examples' was specified, sources of Qt's
examples would be installed, but the examples would not be built.
This switch has always been a source for confusion and is only
interesting for distributors, who can just package the examples
directory tree.
Change-Id: I0291d70e4951d98b553a4abf217db49d05316d3a
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The include directive was incorrectly written.
This amends 5c092c2b40.
Change-Id: Ia72ca3a5d5e1486ade4d71a764550d36979640f6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We need to use the imported host tracegen target to generate files, not
the one we're going to cross-build.
This amends 5c092c2b40.
Change-Id: Ib74dd2d87110383c31216872eb55bebf5d90df37
Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
qt_record_extra_package_dependency is called by qtwayland to register a
dependency between the qtwaylandscanner tool and the waylandscanner
tool.
When cross-compiling the tools in a Yocto environment, the adjusted
target name was not taken into account.
Task-number: QTBUG-83968
Change-Id: Ibf7b94876bf29827cf0d9c9bb471f359ef6ff15f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This works around linking issues when doing yocto non-prefix Qt
builds, because CMake does not add -rpath-link flags even though it
probably should.
Task-number: QTBUG-86533
Change-Id: Iaaf246ac71ca05d9369ceb6eb9c4a1e206c42839
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
I accidentally noticed the message in a CI job, but it didn't fail the
build because the FATAL_ERRO was considered as another text token to
print, instead of a command keyword.
Change-Id: I0e30ebacbed32d1017f9ded681cd6b15cbc32573
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The qt_build_internals_disable_pkg_config_if_needed function didn't
actually check if the pkg-config executable is available when turning
the pkg-config feature on.
This broke certain configurations like Android (on some hosts).
Try to find the executable and take that into account when computing
the value of the feature.
Task-number: QTBUG-85399
Change-Id: Ie79c637f2d2b689c392862c90075d309906fe506
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The generated toolchain file embedded windows style paths for the
android sdk and chainloaded toolchain. This caused CMake does fail at
configure time while trying to evaluate backslashes as escape chars.
Also syncqt was searched for in libexec, which is not the right
directory on Windows. Use the host info package to get the location of
the 'libexec'.
Task-number: QTBUG-85399
Task-number: QTBUG-85911
Task-number: QTBUG-86053
Change-Id: I1b15ce84496d52c3fda2f65138e1eac43bc95c9e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Rather than force setting the apple sysroot and Qt host paths, first
check if they are not already defined on the command line and if they
aren't, check that the paths with which Qt was configured exist.
The goal of the patch is to not set invalid paths, like when using a
Qt built in the CI, which will have a different host path / sysroot
compared to what a user has locally.
Task-number: QTBUG-85240
Change-Id: Ic37566b4fa845d8d1b4e4b5ba7fa4be769e99ca8
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Using find_library() to find an Xcode framework will end up embedding
the absolute path of the framework into INTERFACE_LINK_LIBRARIES.
A different machine might not have the SDK installed in the same
location, which will cause build failures. This happens in our CI
because Xcode is installed to /Applications/Xcode11.app.
To fix this, replace all system framework paths with
'-framework Foo' flags instead.
We already do this for OpenGL and OpenGL ES.
In the future we might want to convert these into full standalone
FindFoo scripts that expose proper targets.
Fixes: QTBUG-86299
Task-number: QTBUG-86422
Task-number: QTBUG-85240
Change-Id: I22b2b2d1d9e92108098d3974105e3758978cd8e2
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
We don't support older compilers from before they accepted
the architecture codenames.
Change-Id: If13a10ed95b34007858bfffd1631a08b425fa9c3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This was added for Qt 5 in 780137d585 but
apparently the change was never ported over to CMake.
Fixes: QTBUG-86452
Change-Id: If13a10ed95b34007858bfffd1631a084370a3232
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Until now, QtProcessConfigureArgs.cmake could only handle qtbase and the
top-level build. Add the variable MODULE_ROOT that the user can point to
the module that is to be configured.
Example - QtDeclarative can now be configured like this:
cd qtdeclarative-build-dir
echo -qml-network > config.opt
cmake -DOPTFILE=config.opt -DMODULE_ROOT=<source-root>/qtdeclarative \
-DCMAKE_COMMAND=<install-prefix>/bin/qt-cmake-private \
-P <source-root>/qtbase/cmake/QtProcessConfigureArgs.cmake
A convenience script that saves the user from entering this unwieldy
incantation will be added in a subsequent commit.
Change-Id: If46103de3a8eb84b15e7600ebfec25544451e1d5
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
We never passed a valid target name to qt_apply_rpaths.
This amends fde98f7794.
Task-number: QTBUG-85399
Change-Id: I1c023ce30a3a8b5ec43d020373960d19fe20f59a
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
We need to call qt_apply_rpaths for targets that are created with
qt_internal_add_app too. This is in line with what qt_app.prf does.
Task-number: QTBUG-85399
Change-Id: If5ffb05cca191c6cae9a330e1f4556d342a68ff8
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
AndroidManifest.xml file and the Android plugin already has a way
to provide commandline-arguments to app with the tag
"android.app.arguments". This change allow to set it from qmake/cmake
and allow Qt Creator to use that.
Task-number: QTCREATORBUG-23712
Change-Id: I3e680f40fd36ba6aaac7f344fb9509d2c3360e74
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
For prefix builds we need to install the file.
Amends db21bad936.
Change-Id: Ia8e859dc048cc4bd74eb95ed0d2adce9c6b11902
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Fix name of target so that qtattributionsscanner actually generates content.
Change-Id: Ie42067928d7cd1de02fa4ae92a0f5ef54bd54a5c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Make sure the executable path contains an .exe on Windows.
Change-Id: I972a3aaf1ad0510525ebfcc84e8c589f555c6d00
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
C4180, C4458 were disabled already in 2012, in commit 6668f5becf.
C4577 was disabled due to QtScript being compiled without exception
support in commit 97d7d80e73.
Anyhow, Qt Script is now officially gone in Qt 6, and Qt headers
do work just fine with C4180. Finally, C4458 is nowadays a W4 warning,
so not enabled in the first place.
Task-number: QTBUG-82615
Change-Id: I2f9b8e858817876b069a166129fbfac7ef3587a0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Configure Qt with -DQT_FEATURE_headersclean=ON to enable the
check. There will be separate target for each module include
(e.g. QtCore_header_check), but the check will also be done
when the module is built for the first time.
There are notable differences to the qmake version:
- the build does not pick up anymore default defines or flags from
the module, or Qt. Instead options like -fPIC they have to be listed
explicitly. Also for this reason, we have to skip the vulkan-related
headers from the check, since vulkan/vulkan.h is not necessarily
in the compiler's default search path.
- some checks for nowadays unsupported compiler versions are
removed.
- -Wdouble-promotion -Wshorten-64-to-32 is not added for clang
builds; the qmake code path did never enforce that on CI
machines (it was non-Apple clang only), and the check currently
fails on these configurations.
Fixes: QTBUG-82615
Change-Id: I1cd303677b1472116910b6c27748f96436feb35e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use any definition from pkgconfig for the EGL compilation test.
Change-Id: I95c659b87ab7b0de81f000e3f52195161a493ef5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Very simple AUTODETECT expressions worked fine, but expressions with
parentheses, for example, were not correctly evaluated.
Change-Id: Ibec4fa55474e149a701f861838fdea41d31beca0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This configure switch controls the feature 'optimize_size'.
This isn't merely a mapping to CMAKE_BUILD_TYPE=MinSizeRel, because
we potentially want to combine -optimize-size with -force-debug-info,
which maps to CMAKE_BUILD_CONFIG=RelWithDebInfo.
Task-number: QTBUG-85373
Change-Id: I1a9343ebc54816f52e90e9d33ea3df4c99b1ec9f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Command line options like -debug result in setting the variable
INPUT_debug. INPUT_debug is mapped to the CMake argument
-DCMAKE_BUILD_TYPE=Debug. INPUT_debug also matches the feature
'debug', and the CMake argument -DFEATURE_debug=ON was passed.
Do not pass -DFEATURE_xxx CMake arguments for inputs that are already
handled.
Change-Id: If096dff1c6dd694545c6f671f5f3512a43c3ec50
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The -host prefix was added to the 'preliminary' directory rather than
the actual wrapper shell script. This caused it to be overwritten
every time by the cross-compiled qmake binary.
Change-Id: I103811c6aa9181fa701e3e7ecaf828ecdd1e3c90
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
On QNX the feature detection of GLESv2 is failing due to missing
symbols which are part of EGL library.
Add EGL library as a dependency if it's found on the system.
This allows OpenGL ES feature detection to work on QNX.
Task-number: QTBUG-83202
Change-Id: I90531d925fadce5d893ea9244793fc02a4595ed1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This commit allows building Qt6's QtBase using QNX 7.1 and a toolchain
file which is almost identical to what CMake has in its documentation:
https://cmake.org/cmake/help/latest/manual/cmake-toolchains.7.html#cross-compiling-for-qnx
set(CMAKE_SYSTEM_NAME QNX)
set(arch gcc_ntoarmv7le)
set(CMAKE_C_COMPILER qcc)
set(CMAKE_C_COMPILER_TARGET ${arch})
set(CMAKE_CXX_COMPILER q++)
set(CMAKE_CXX_COMPILER_TARGET ${arch})
set(CMAKE_SYSROOT $ENV{QNX_TARGET})
The only difference is the usage of q++ instead of QCC, which is no
longer present in QNX 7.1 SDK.
Task-number: QTBUG-83202
Change-Id: I51031540721275f2ee83cee9e7df4994a65db0e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On QNX 7.1 x86drm.h is located under <...>/usr/include/libdrm, unlike
linux where it's present under /usr/include.
find_path would not find it on QNX, and instead get /usr/include from
host, which resulted in a failure to compile.
Task-number: QTBUG-83202
Change-Id: I03d6c2d4dfbe91bb70df0a322e84890bd7c8548a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In qmake it's done for all qmake projects, in CMake we lean on the
safe side and apply it to building Qt itself. User CMake projects can
then choose to add it themselves.
Task-number: QTBUG-85992
Change-Id: I51919f947d43ffd9925e3d2837dcad17e480367d
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
There are inconsistencies in the default optimization flags added by
CMake across configurations like Release and RelWithDebInfo.
In particular Release uses -O3, whereas RelWithDebInfo uses -O2,
as well as usage of /INCREMENTAL in release configs with MSVC, etc.
To make sure that the Qt 6 binaries built with CMake are consistent
across configs, as well as consistent with the flags we used when
building Qt 5 with qmake, add a horrible search and replace mechanism
to replaces the CMake flags with what our mkspecs indicate to use.
Ideally this would be done by providing custom CMake toolchain files
for each platform we support, and we might revisit that later if the
need really arises.
To implement the replacing, we first need the flags that should be
added. Port the QMAKE_CFLAGS_OPTIMIZE variables to CMake, which is
done in QtCompilerOptimization.cmake.
Then a new function called
qt_internal_set_up_config_optimizations_like_in_qmake will look for
any kind of optimization flags set in the
CMAKE_<LANG>_FLAGS_<CONFIG> style variables, remove them, and add
the appropriate flags that qmake mkspecs provide.
On some platforms (like Windows MSVC) the function also alters the
linker CMAKE_${TYPE}_LINKER_FLAGS_<CONFIG> style variables.
The mechanism allows opting out of this replacing by
setting the QT_USE_DEFAULT_CMAKE_OPTIMIZATION_FLAGS value.
It also allows opting into removal of flags for custom configs by
providing QT_ADDITIONAL_OPTIMIZATION_FLAG_CONFIGS. It's only removal,
because we wouldn't know what kind of config it is, and thus what
flags to add.
The currently modified configs are: Release, RelWithDebInfo,
MinSizeRel, Debug aka the usual default CMake provided ones.
The mechanism is only applied to C-like languages.
ASM is not handled to be on the safe side due to not knowing what kind
of compiler flags the platform assembler might take.
It's also important to skip RC on MSVC platforms.
Task-number: QTBUG-85992
Change-Id: I3712d5cd5a34fceab54f56a6fa46b4e678952362
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The CMake configure process fails without include guards for these
two find modules on QNX.
Task-number: QTBUG-83202
Change-Id: I3cc589f98bc3b6b22c401421927ee6dab2663fb7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QNX doesn't come with pkg-config support.
Task-number: QTBUG-83202
Change-Id: I2ac0c014a071b83ef9a2d8114bae0e9ff9b3b422
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The configure argument -qreal <type> maps to the CMake argument
-DQT_COORD_TYPE=<type>.
Fixes: QTBUG-83325
Change-Id: I94970f31ccfb241b1dd4f1d9b6cef25d6684dc05
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Introduce new CMake variables and map
-D to QT_EXTRA_DEFINES,
-I to QT_EXTRA_INCLUDEPATHS,
-L to QT_EXTRA_LIBDIRS,
and -F to QT_EXTRA_FRAMEWORKPATHS.
Those variables only affect the Qt build, not user projects.
Fixes: QTBUG-85878
Change-Id: I229df2eed1505a2619068d0d32975962b052569a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We extend configurejson2cmake to read the "commandline"
information from configure.json. This data is then translated to CMake function
calls and written it into commandline.cmake files.
We extend QtProcessConfigureArgs.cmake to pick up those commandline.cmake
files to feed our command line handling code, which is a
re-implementation of the command line handling in qt_configure.prf.
The command line handler sets INPUT_xxx variables, similar to
configure/qmake's config.input.xxx variables. The INPUT_xxx values are
translated
- to -DFEATURE_xxx=ON/OFF arguments if the input represents a feature,
- to corresponding CMake variables if such a variable is known,
- or to -DINPUT_xxx=yyy CMake arguments.
Configure arguments that have an entry in
cmake/configure-cmake-mapping.md are actually implemented. Other
arguments are likely to need more work.
Task-number: QTBUG-85373
Change-Id: Ia96baa673fc1fb88e73ba05a1afb473aa074b37d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
To fix CMake Qt For Android projects to configure, we need to move
some functions from a private CMake API file only, to a public one.
Add Qt6AndroidMacros.cmake which will be loaded by Qt6Core package.
We'll have to decide how we proceed with Qt5AndroidSupport.cmake,
because that file automatically runs code when included in Qt5, and we
usually don't want to do it.
We'll also have to decide how to handle the define_property() calls
that are still left in the private QtPlatformAndroid.cmake file.
With this fix, Qt example CMake projects that use
add_qt_gui_executable should now be buildable. An APK can be created
with 'ninja apk'.
Unfortunately Qt Creator 4.13 does not currently seem to support
opening and building CMake Qt For Android projects properly.
While the build succeeds after fiddling with the Kit settings, the APK
deploy step fails to run (at least on my machine).
So the simplest way to run the built APK is to open the android-build
dir with Android Studio and launch the example application from there.
Task-number: QTBUG-85399
Change-Id: I77f246331de7a6e9e6d4ba7d973730190138f136
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Fix detection of qt android platform plugin by globbing inside
the install qt6 prefix location. This is just a sanity check.
Fix platform plugin detection for CMake standalone tests configured
using qt-cmake-standalone-test, which used to look into the fake
standalone prefix location instead of the real Qt location.
Fix detection of stdlib path using CMAKE_SYSROOT.
Add a global apk target that allows easier building of all apk targets
defined in the project. Creation of this target can be opted out by
setting QT_NO_GLOBAL_APK_TARGET to TRUE.
Amends b1f8ca8032.
Task-number: QTBUG-85399
Change-Id: Ic9c1646b4f00e0084fe3f4397df471b8f925afd8
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The helpers can now be included manually in a project to call any
required function. There was a use case for that in qttools, which was
not possible because including QtPostProcess early would produce side
effects.
Task-number: QTBUG-86035
Change-Id: I05d5576bbac45d4b9e298b23aa2a33088d64968e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
QtBuild.cmake is huge. Split it.
Move module, plugin, tools, executables and test related functions out
of QtBuild.cmake into separate files.
Do the same for many other things too.
An additional requirement is that all the new Helpers files only
define functions and macros.
No global variable definitions are allowed, nor execution of commands
with side effects.
Some notes:
qt_install_qml_files is removed because it's dead code.
Some functions still need to be figured out, because they are
interspersed and depend on various global state assignments.
Task-number: QTBUG-86035
Change-Id: I21d79ff02eef923c202eb1000422888727cb0e2c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The endless saga of fighting with qt_find_package and global target
promotion. In certain scenarios we want to opt out of target promotion
to global scope.
One such case is in qttools with WrapLibClang and Threads::Threads.
Threads::Threads will be found in the top-level scope via
Qt6Dependencies.
WrapLibClang is declared in src/ directory scope, and
then we try to promote it ands its dependencies to the global scope,
via qt_find_package() ->
qt_find_package_promote_targets_to_global_scope().
This fails because we can't promote Threads::Threads due to it being
added in a different subdirectory scope.
Introduce 2 new functions.
qt_internal_should_not_promote_package_target_to_global and
qt_internal_disable_find_package_global_promotion.
The first one is used to disable promotion of targets to global scope
in qt_find_package.
To mark a target not to be promoted, the second function is used.
It will be used by qttools for the WrapLibClang case.
Task-number: QTBUG-85877
Change-Id: If6caf10a94999402026517a623ae29e3ab1eeb7f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Also use the value to actually write it into qconfig.cpp so that qmake
reports the right information.
Change-Id: Icc4bf36b0dc6ad75d93ac16f39e5b361c0ce52b4
Fixes: QTBUG-81289
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Our initial approach to looking for host Qt tools when cross-compiling
to a platform with a different architecture bitness compared to the
host one was to unset CMAKE_SIZEOF_VOID_P before calling
find_package(Qt6FooTools) and then restoring the value.
That works to bypass the architecture bitness test in the
ConfigVersion files, but it also influences the paths that
find_package() searches in, specifically the lib<arch> paths like
/usr/lib64 will not be searched in.
Fortunately since CMake 3.14, write_basic_package_version_file() can
take an additional ARCH_INDEPENDENT parameter. This disables the
architecture bitness test when looking for the package, while allowing
to still search in the /usr/lib64 like paths.
Use it when creating the QtFooToolConfigVersion.cmake files.
One could argue we should actually check if the tool executables could
run on the host system where find_package is called for
cross-compilation.
We could do that in another change if the problem ever arises.
Amends 03aa74e40d
Amends 914b367c7f
Change-Id: I1181ff637ac80064a6a8538170b28a41743fc90c
Fixes: QTBUG-81672
Reviewed-by: Christophe Giboudeaux <christophe@krop.fr>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This file provides common feature-functionality is supposed to be
included by QtFeature.cmake and QtProcessConfigureArgs.cmake.
Change-Id: Ifb483c2a9c4014d240c2a4d6ff07b5c0ceee9c3a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If the user specified CMAKE_OSX_DEPLOYMENT_TARGET=10.15 for the Qt
build then building projects with qmake failed, because the mkspec
hard-codes QMAKE_MACOSX_DEPLOYMENT_TARGET to 10.14.
We now write QMAKE_MACOSX_DEPLOYMENT_TARGET to qconfig.pri to override
the mkspecs' default.
Fixes: QTBUG-85923
Change-Id: I6a39cfe047ac0f99e1da0ca0728d63c741bd4fed
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This automatically sets the CMake Generator to be the same as the one
used for qtbase.
Change-Id: If9e1a6942520417393055c572f0d892efca43d2e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Apparently CMake encods targets from different scopes with a different
encoding scheme for earlier CMake versions.
CMake 3.16.3: Threads::Threads::@<0x5604cb3f6b50>
CMake 3.18.0: ::@(0x5604cb3f6b50);Threads::Threads;::@
Handle the earlier version approach as well. It needs to be done both
when writing out 3rd party dependencies, as well as for lib prl files.
Possibly in more places as well, but I didn't detect additional
places yet.
Amends 92ee9bd6b8
Task-number: QTBUG-85801
Task-number: QTBUG-85877
Change-Id: Ib348b51b2d623fb50d9080dba2beeb931d47a69c
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
It's not immediately obvious that you need to use
all underscores for the feature name, so add a
line that explaines it.
Change-Id: I508eaf909c808fb0a93442f6e71428c18559b965
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We expose it in the private QtBuildInternals package, but we need it
also as public information for consumption in qt_import_qml_plugins()
to decide whether it should do anything.
Change-Id: If135ae596b4edaf8e2c458f6a2518b968c6d01c4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
For qt_import_qml_plugins to work, it needs to have access to the Qml
plugin targets by the time find_package(Qt6Qml) is called.
To do that, we modify the generation of Qml plugin Config, Targets and
Dependencies files to go into a special 'QmlPlugins' subfolder of the
Qml package.
The Qml package will then GLOB include all the Config files in that
folder, to make them available whenever find_package(Qt6Qml) is
called.
This is similar to how the Qt plugins were glob included in the CMake
integration of Qt 5.15. In fact that glob including is missing in Qt 6
for regular Qt plugins, and should be implemented in a following
change. Currently the Qt Plugins config files that are included are
hardcoded to the list of known plugins at Qt configuration time.
As a drive-by to make this all work, the naming of the various Config
and Dependencies files has been normalized to include the Qt6 prefix.
This is done for both regular Qt plugins and Qml plugins.
Task-number: QTBUG-85961
Change-Id: Id20da72337ca2945fa330ea6fb43535e44a83292
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Embed package versions into the qt_find_package calls for various
Linux specific packages.
Task-number: QTBUG-82917
Change-Id: I5d1cb623f81932dfae4658b8a3a89eedb71ea3af
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If certain 3rd party libraries have a version that's not suitable for
Qt, the configure summary should say so, rather than use them and fail
at build time.
With the current situation, we have to duplicate the version
information from the configure.json files in helper.py, by assigning
the version number as an extra find_package variable.
Rerunning configurejson2cmake then embeds this version info into the
qt_find_package calls in configure.cmake.
Some of the Find modules are rewritten to take the specified version
into account when looking for the libraries.
This involves moving around the code for creating a target, after
calling find_package_handle_standard_args() so we know if a good
enough version was found.
Task-number: QTBUG-82917
Change-Id: I139748d8090e0630cda413362760034dc3483e11
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Before clang 9, it was enabled by default
when -fsanitize=undefined was set.
Pick-to: 5.15
Change-Id: I0faf3ae1901d4badc6d265fa8081185be4360636
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
