skia2/tools/render_pictures_main.cpp

532 lines
19 KiB
C++
Raw Normal View History

/*
* Copyright 2012 Google Inc.
*
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
#include "LazyDecodeBitmap.h"
#include "CopyTilesRenderer.h"
#include "SkBitmap.h"
#include "SkDevice.h"
#include "SkCommandLineFlags.h"
#include "SkGraphics.h"
#include "SkImageDecoder.h"
#include "SkImageEncoder.h"
#include "SkMath.h"
#include "SkOSFile.h"
#include "SkPicture.h"
#include "SkPictureRecorder.h"
#include "SkStream.h"
#include "SkString.h"
#include "image_expectations.h"
#include "PictureRenderer.h"
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
#include "PictureRenderingFlags.h"
#include "picture_utils.h"
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
// Flags used by this file, alphabetically:
DEFINE_bool(bench_record, false, "If true, drop into an infinite loop of recording the picture.");
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
DECLARE_bool(deferImageDecoding);
DEFINE_string(descriptions, "", "one or more key=value pairs to add to the descriptions section "
"of the JSON summary.");
DEFINE_string(imageBaseGSUrl, "", "The Google Storage image base URL the images are stored in.");
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
DEFINE_int32(maxComponentDiff, 256, "Maximum diff on a component, 0 - 256. Components that differ "
"by more than this amount are considered errors, though all diffs are reported. "
"Requires --validate.");
DEFINE_string(mismatchPath, "", "Write images for tests that failed due to "
"pixel mismatches into this directory.");
#if GR_GPU_STATS
DEFINE_bool(gpuStats, false, "Only meaningful with gpu configurations. "
"Report some GPU call statistics.");
#endif
DEFINE_bool(preprocess, false, "If true, perform device specific preprocessing before rendering.");
DEFINE_string(readJsonSummaryPath, "", "JSON file to read image expectations from.");
DECLARE_string(readPath);
DEFINE_bool(writeChecksumBasedFilenames, false,
"When writing out images, use checksum-based filenames.");
DEFINE_bool(writeEncodedImages, false, "Any time the skp contains an encoded image, write it to a "
"file rather than decoding it. Requires writePath to be set. Skips drawing the full "
"skp to a file. Not compatible with deferImageDecoding.");
DEFINE_string(writeJsonSummaryPath, "", "File to write a JSON summary of image results to.");
DEFINE_string2(writePath, w, "", "Directory to write the rendered images into.");
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
DEFINE_bool(writeWholeImage, false, "In tile mode, write the entire rendered image to a "
"file, instead of an image for each tile.");
DEFINE_bool(validate, false, "Verify that the rendered image contains the same pixels as "
"the picture rendered in simple mode. When used in conjunction with --bbh, results "
"are validated against the picture rendered in the same mode, but without the bbh.");
////////////////////////////////////////////////////////////////////////////////////////////////////
/**
* Table for translating from format of data to a suffix.
*/
struct Format {
SkImageDecoder::Format fFormat;
const char* fSuffix;
};
static const Format gFormats[] = {
{ SkImageDecoder::kBMP_Format, ".bmp" },
{ SkImageDecoder::kGIF_Format, ".gif" },
{ SkImageDecoder::kICO_Format, ".ico" },
{ SkImageDecoder::kJPEG_Format, ".jpg" },
{ SkImageDecoder::kPNG_Format, ".png" },
{ SkImageDecoder::kWBMP_Format, ".wbmp" },
{ SkImageDecoder::kWEBP_Format, ".webp" },
{ SkImageDecoder::kUnknown_Format, "" },
};
/**
* Get an appropriate suffix for an image format.
*/
static const char* get_suffix_from_format(SkImageDecoder::Format format) {
for (size_t i = 0; i < SK_ARRAY_COUNT(gFormats); i++) {
if (gFormats[i].fFormat == format) {
return gFormats[i].fSuffix;
}
}
return "";
}
/**
* Base name for an image file created from the encoded data in an skp.
*/
static SkString gInputFileName;
/**
* Number to be appended to the image file name so that it is unique.
*/
static uint32_t gImageNo;
/**
* Set up the name for writing encoded data to a file.
* Sets gInputFileName to name, minus any extension ".*"
* Sets gImageNo to 0, so images from file "X.skp" will
* look like "X_<gImageNo>.<suffix>", beginning with 0
* for each new skp.
*/
static void reset_image_file_base_name(const SkString& name) {
gImageNo = 0;
// Remove ".skp"
const char* cName = name.c_str();
const char* dot = strrchr(cName, '.');
if (dot != NULL) {
gInputFileName.set(cName, dot - cName);
} else {
gInputFileName.set(name);
}
}
/**
* Write the raw encoded bitmap data to a file.
*/
static bool write_image_to_file(const void* buffer, size_t size, SkBitmap* bitmap) {
SkASSERT(!FLAGS_writePath.isEmpty());
SkMemoryStream memStream(buffer, size);
SkString outPath;
SkImageDecoder::Format format = SkImageDecoder::GetStreamFormat(&memStream);
SkString name = SkStringPrintf("%s_%d%s", gInputFileName.c_str(), gImageNo++,
get_suffix_from_format(format));
SkString dir(FLAGS_writePath[0]);
outPath = SkOSPath::Join(dir.c_str(), name.c_str());
SkFILEWStream fileStream(outPath.c_str());
if (!(fileStream.isValid() && fileStream.write(buffer, size))) {
SkDebugf("Failed to write encoded data to \"%s\"\n", outPath.c_str());
}
// Put in a dummy bitmap.
return SkImageDecoder::DecodeStream(&memStream, bitmap, kUnknown_SkColorType,
SkImageDecoder::kDecodeBounds_Mode);
}
////////////////////////////////////////////////////////////////////////////////////////////////////
/**
* Called only by render_picture().
*/
static bool render_picture_internal(const SkString& inputPath, const SkString* writePath,
const SkString* mismatchPath,
sk_tools::PictureRenderer& renderer,
SkBitmap** out) {
SkString inputFilename = SkOSPath::Basename(inputPath.c_str());
SkString writePathString;
if (writePath && writePath->size() > 0 && !FLAGS_writeEncodedImages) {
writePathString.set(*writePath);
}
SkString mismatchPathString;
if (mismatchPath && mismatchPath->size() > 0) {
mismatchPathString.set(*mismatchPath);
}
SkFILEStream inputStream;
inputStream.setPath(inputPath.c_str());
if (!inputStream.isValid()) {
SkDebugf("Could not open file %s\n", inputPath.c_str());
return false;
}
SkPicture::InstallPixelRefProc proc;
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
if (FLAGS_deferImageDecoding) {
proc = &sk_tools::LazyDecodeBitmap;
} else if (FLAGS_writeEncodedImages) {
SkASSERT(!FLAGS_writePath.isEmpty());
reset_image_file_base_name(inputFilename);
proc = &write_image_to_file;
} else {
proc = &SkImageDecoder::DecodeMemory;
}
SkDebugf("deserializing... %s\n", inputPath.c_str());
SkAutoTUnref<SkPicture> picture(SkPicture::CreateFromStream(&inputStream, proc));
if (NULL == picture) {
SkDebugf("Could not read an SkPicture from %s\n", inputPath.c_str());
return false;
}
if (FLAGS_preprocess) {
// Because the GPU preprocessing step relies on the in-memory picture
// statistics we need to rerecord the picture here
SkPictureRecorder recorder;
picture->playback(recorder.beginRecording(picture->cullRect().width(),
picture->cullRect().height(),
NULL, 0));
picture.reset(recorder.endRecording());
}
while (FLAGS_bench_record) {
SkPictureRecorder recorder;
picture->playback(recorder.beginRecording(picture->cullRect().width(),
picture->cullRect().height(),
NULL, 0));
SkAutoTUnref<SkPicture> other(recorder.endRecording());
}
SkDebugf("drawing... [%f %f %f %f] %s\n",
picture->cullRect().fLeft, picture->cullRect().fTop,
picture->cullRect().fRight, picture->cullRect().fBottom,
inputPath.c_str());
renderer.init(picture, &writePathString, &mismatchPathString, &inputFilename,
FLAGS_writeChecksumBasedFilenames);
if (FLAGS_preprocess) {
if (renderer.getCanvas()) {
renderer.getCanvas()->EXPERIMENTAL_optimize(renderer.getPicture());
}
}
renderer.setup();
renderer.enableWrites();
bool success = renderer.render(out);
if (!success) {
SkDebugf("Failed to render %s\n", inputFilename.c_str());
}
renderer.end();
return success;
}
static inline int getByte(uint32_t value, int index) {
SkASSERT(0 <= index && index < 4);
return (value >> (index * 8)) & 0xFF;
}
static int MaxByteDiff(uint32_t v1, uint32_t v2) {
return SkMax32(SkMax32(abs(getByte(v1, 0) - getByte(v2, 0)), abs(getByte(v1, 1) - getByte(v2, 1))),
SkMax32(abs(getByte(v1, 2) - getByte(v2, 2)), abs(getByte(v1, 3) - getByte(v2, 3))));
}
class AutoRestoreBbhType {
public:
AutoRestoreBbhType() {
fRenderer = NULL;
fSavedBbhType = sk_tools::PictureRenderer::kNone_BBoxHierarchyType;
}
void set(sk_tools::PictureRenderer* renderer,
sk_tools::PictureRenderer::BBoxHierarchyType bbhType) {
fRenderer = renderer;
fSavedBbhType = renderer->getBBoxHierarchyType();
renderer->setBBoxHierarchyType(bbhType);
}
~AutoRestoreBbhType() {
if (fRenderer) {
fRenderer->setBBoxHierarchyType(fSavedBbhType);
}
}
private:
sk_tools::PictureRenderer* fRenderer;
sk_tools::PictureRenderer::BBoxHierarchyType fSavedBbhType;
};
/**
* Render the SKP file(s) within inputPath.
*
* @param inputPath path to an individual SKP file, or a directory of SKP files
* @param writePath if not NULL, write all image(s) generated into this directory
* @param mismatchPath if not NULL, write any image(s) not matching expectations into this directory
* @param renderer PictureRenderer to use to render the SKPs
* @param jsonSummaryPtr if not NULL, add the image(s) generated to this summary
*/
static bool render_picture(const SkString& inputPath, const SkString* writePath,
const SkString* mismatchPath, sk_tools::PictureRenderer& renderer,
sk_tools::ImageResultsAndExpectations *jsonSummaryPtr) {
int diffs[256] = {0};
SkBitmap* bitmap = NULL;
renderer.setJsonSummaryPtr(jsonSummaryPtr);
bool success = render_picture_internal(inputPath,
FLAGS_writeWholeImage ? NULL : writePath,
FLAGS_writeWholeImage ? NULL : mismatchPath,
renderer,
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
FLAGS_validate || FLAGS_writeWholeImage ? &bitmap : NULL);
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
if (!success || ((FLAGS_validate || FLAGS_writeWholeImage) && bitmap == NULL)) {
SkDebugf("Failed to draw the picture.\n");
SkDELETE(bitmap);
return false;
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
if (FLAGS_validate) {
SkBitmap* referenceBitmap = NULL;
sk_tools::PictureRenderer* referenceRenderer;
// If the renderer uses a BBoxHierarchy, then the reference renderer
// will be the same renderer, without the bbh.
AutoRestoreBbhType arbbh;
if (sk_tools::PictureRenderer::kNone_BBoxHierarchyType !=
renderer.getBBoxHierarchyType()) {
referenceRenderer = &renderer;
referenceRenderer->ref(); // to match auto unref below
arbbh.set(referenceRenderer, sk_tools::PictureRenderer::kNone_BBoxHierarchyType);
} else {
#if SK_SUPPORT_GPU
referenceRenderer = SkNEW_ARGS(sk_tools::SimplePictureRenderer,
(renderer.getGrContextOptions()));
#else
referenceRenderer = SkNEW(sk_tools::SimplePictureRenderer);
#endif
}
SkAutoTUnref<sk_tools::PictureRenderer> aurReferenceRenderer(referenceRenderer);
success = render_picture_internal(inputPath, NULL, NULL, *referenceRenderer,
&referenceBitmap);
if (!success || NULL == referenceBitmap || NULL == referenceBitmap->getPixels()) {
SkDebugf("Failed to draw the reference picture.\n");
SkDELETE(bitmap);
SkDELETE(referenceBitmap);
return false;
}
if (success && (bitmap->width() != referenceBitmap->width())) {
SkDebugf("Expected image width: %i, actual image width %i.\n",
referenceBitmap->width(), bitmap->width());
SkDELETE(bitmap);
SkDELETE(referenceBitmap);
return false;
}
if (success && (bitmap->height() != referenceBitmap->height())) {
SkDebugf("Expected image height: %i, actual image height %i",
referenceBitmap->height(), bitmap->height());
SkDELETE(bitmap);
SkDELETE(referenceBitmap);
return false;
}
for (int y = 0; success && y < bitmap->height(); y++) {
for (int x = 0; success && x < bitmap->width(); x++) {
int diff = MaxByteDiff(*referenceBitmap->getAddr32(x, y),
*bitmap->getAddr32(x, y));
SkASSERT(diff >= 0 && diff <= 255);
diffs[diff]++;
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
if (diff > FLAGS_maxComponentDiff) {
SkDebugf("Expected pixel at (%i %i) exceedds maximum "
"component diff of %i: 0x%x, actual 0x%x\n",
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
x, y, FLAGS_maxComponentDiff,
*referenceBitmap->getAddr32(x, y),
*bitmap->getAddr32(x, y));
SkDELETE(bitmap);
SkDELETE(referenceBitmap);
return false;
}
}
}
SkDELETE(referenceBitmap);
for (int i = 1; i <= 255; ++i) {
if(diffs[i] > 0) {
SkDebugf("Number of pixels with max diff of %i is %i\n", i, diffs[i]);
}
}
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
if (FLAGS_writeWholeImage) {
sk_tools::force_all_opaque(*bitmap);
SkString inputFilename = SkOSPath::Basename(inputPath.c_str());
SkString outputFilename(inputFilename);
sk_tools::replace_char(&outputFilename, '.', '_');
outputFilename.append(".png");
if (jsonSummaryPtr) {
sk_tools::ImageDigest imageDigest(*bitmap);
jsonSummaryPtr->add(inputFilename.c_str(), outputFilename.c_str(), imageDigest);
if ((mismatchPath) && !mismatchPath->isEmpty() &&
!jsonSummaryPtr->getExpectation(inputFilename.c_str()).matches(imageDigest)) {
success &= sk_tools::write_bitmap_to_disk(*bitmap, *mismatchPath, NULL,
outputFilename);
}
}
if ((writePath) && !writePath->isEmpty()) {
success &= sk_tools::write_bitmap_to_disk(*bitmap, *writePath, NULL, outputFilename);
}
}
SkDELETE(bitmap);
return success;
}
static int process_input(const char* input, const SkString* writePath,
const SkString* mismatchPath, sk_tools::PictureRenderer& renderer,
sk_tools::ImageResultsAndExpectations *jsonSummaryPtr) {
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
SkOSFile::Iter iter(input, "skp");
SkString inputFilename;
int failures = 0;
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
SkDebugf("process_input, %s\n", input);
if (iter.next(&inputFilename)) {
do {
SkString inputPath = SkOSPath::Join(input, inputFilename.c_str());
if (!render_picture(inputPath, writePath, mismatchPath, renderer, jsonSummaryPtr)) {
++failures;
}
} while(iter.next(&inputFilename));
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
} else if (SkStrEndsWith(input, ".skp")) {
SkString inputPath(input);
if (!render_picture(inputPath, writePath, mismatchPath, renderer, jsonSummaryPtr)) {
++failures;
}
} else {
SkString warning;
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
warning.printf("Warning: skipping %s\n", input);
SkDebugf(warning.c_str());
}
return failures;
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
int tool_main(int argc, char** argv);
int tool_main(int argc, char** argv) {
SkCommandLineFlags::SetUsage("Render .skp files.");
SkCommandLineFlags::Parse(argc, argv);
if (FLAGS_readPath.isEmpty()) {
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
SkDebugf(".skp files or directories are required.\n");
exit(-1);
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
if (FLAGS_maxComponentDiff < 0 || FLAGS_maxComponentDiff > 256) {
SkDebugf("--maxComponentDiff must be between 0 and 256\n");
exit(-1);
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
if (FLAGS_maxComponentDiff != 256 && !FLAGS_validate) {
SkDebugf("--maxComponentDiff requires --validate\n");
exit(-1);
}
if (FLAGS_writeEncodedImages) {
if (FLAGS_writePath.isEmpty()) {
SkDebugf("--writeEncodedImages requires --writePath\n");
exit(-1);
}
if (FLAGS_deferImageDecoding) {
SkDebugf("--writeEncodedImages is not compatible with --deferImageDecoding\n");
exit(-1);
}
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
SkString errorString;
SkAutoTUnref<sk_tools::PictureRenderer> renderer(parseRenderer(errorString,
kRender_PictureTool));
if (errorString.size() > 0) {
SkDebugf("%s\n", errorString.c_str());
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
if (renderer.get() == NULL) {
exit(-1);
}
SkAutoGraphics ag;
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
SkString writePath;
if (FLAGS_writePath.count() == 1) {
writePath.set(FLAGS_writePath[0]);
}
SkString mismatchPath;
if (FLAGS_mismatchPath.count() == 1) {
mismatchPath.set(FLAGS_mismatchPath[0]);
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
}
sk_tools::ImageResultsAndExpectations jsonSummary;
sk_tools::ImageResultsAndExpectations* jsonSummaryPtr = NULL;
if (FLAGS_writeJsonSummaryPath.count() == 1) {
jsonSummaryPtr = &jsonSummary;
if (FLAGS_readJsonSummaryPath.count() == 1) {
SkASSERT(jsonSummary.readExpectationsFile(FLAGS_readJsonSummaryPath[0]));
}
}
int failures = 0;
for (int i = 0; i < FLAGS_readPath.count(); i ++) {
failures += process_input(FLAGS_readPath[i], &writePath, &mismatchPath, *renderer.get(),
jsonSummaryPtr);
}
if (failures != 0) {
SkDebugf("Failed to render %i pictures.\n", failures);
return 1;
}
#if SK_SUPPORT_GPU
#if GR_CACHE_STATS
if (renderer->isUsingGpuDevice()) {
GrContext* ctx = renderer->getGrContext();
ctx->printCacheStats();
#ifdef SK_DEVELOPER
ctx->dumpFontCache();
#endif
}
#endif
#if GR_GPU_STATS
if (FLAGS_gpuStats && renderer->isUsingGpuDevice()) {
GrContext* ctx = renderer->getGrContext();
SkDebugf("RenderTarget Binds: %d\n", ctx->gpuStats()->renderTargetBinds());
SkDebugf("Shader Compilations: %d\n", ctx->gpuStats()->shaderCompilations());
}
#endif
#endif
if (FLAGS_writeJsonSummaryPath.count() == 1) {
// If there were any descriptions on the command line, insert them now.
for (int i=0; i<FLAGS_descriptions.count(); i++) {
SkTArray<SkString> tokens;
SkStrSplit(FLAGS_descriptions[i], "=", &tokens);
SkASSERT(tokens.count() == 2);
jsonSummary.addDescription(tokens[0].c_str(), tokens[1].c_str());
}
if (FLAGS_imageBaseGSUrl.count() == 1) {
jsonSummary.setImageBaseGSUrl(FLAGS_imageBaseGSUrl[0]);
}
jsonSummary.writeToFile(FLAGS_writeJsonSummaryPath[0]);
}
return 0;
}
#if !defined SK_BUILD_FOR_IOS
int main(int argc, char * const argv[]) {
return tool_main(argc, (char**) argv);
}
#endif