Unlike other ops, always use half-float colors. The logic around the
Instance struct makes dynamically switching color size tricky.
CCPR stores color in a per-instance attribute though, so the cost of
always using FP16 is much lower.
Bug: skia:
Change-Id: I9c0c64940f74f915a18417a5830030558e065d28
Reviewed-on: https://skia-review.googlesource.com/c/182760
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
This file was adjusted 3 times, beginning here
commit 212e9060ed
Author: Mike Reed <reed@google.com>
Date: Tue Dec 25 17:35:49 2018 -0500
to try to update it to use SkFont. Along the way we broke the part where
it compares drawing with the typeface pre and post streaming. This CL
restores the original test, and then updated it to use SkFont.
After this CL, we should be able to move SK_SUPPORT_LEGACY_PAINT_FONT_FIELDS
to clients, having them opt-in.
Bug: skia:
Change-Id: Id786160322f8530f5d0c65b30a0c228139b39d61
Reviewed-on: https://skia-review.googlesource.com/c/182805
Reviewed-by: Mike Reed <reed@google.com>
Auto-Submit: Mike Reed <reed@google.com>
This should help avoid confusion from T**.
Change-Id: I1851baa2a55714721fa935d234b6a4a1c6d6504f
Reviewed-on: https://skia-review.googlesource.com/c/182562
Commit-Queue: Mike Klein <mtklein@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Auto-Submit: Mike Klein <mtklein@google.com>
Reviewed-by: Herb Derby <herb@google.com>
This is a reland of 5820b0c3f3
It is updated in patchset 2 to clean up pointers passed into memcpy, and to
optimize the bounds calculation in GrPerspQuad. This should fix a performance
regression caused by the move away from caching 1/w. The Sk4f::invert() does not
always preserve 1/1 == 1, which led to bounds slightly outside of clips and
thus forced Skia to keep the scissor test enabled. The fix also restores the
optimization of skipping the 1/w division when the quad is known to be 2D.
Original change's description:
> Use specialized quad lists in rectangle ops
>
> Hopefully reduces memory footprint of GrFillRectOp and GrTextureOp
>
> The original rect code (GrAAFillRectOp) stored 2 SkMatrices (18 floats), 2
> SkRects (8 floats) an SkPMColor4f (4 floats) and a flag (1 int) for a total
> of 124 bytes per quad that was stored in the op.
>
> The first pass at the rectangle consolidation switched to storing device and
> local quads as GrPerspQuads (32 floats), an SkPMColor4f (4 floats) and a flag
> (1 int) for a total of 148 bytes per quad. After landing, several memory
> regressions appeared in Chrome and our perf monitor.
>
> Several intertwined approaches are taken here. First, GrPerspQuad no longer
> caches 1/w, which makes a quad 12 floats instead of 16. Second, a specialized
> list type is defined that allows storing the x, y, and extra metadata together
> for quads, but keeps the w components separate. When the quad type isn't
> perspective, w is not stored at all since it is implicitly 1 and can be
> reconstituted at tessellation time. This brings the total per quad to either
> 84 or 116 bytes, depending on if the op list needs perspective information.
>
> Bug: chromium:915025
> Bug: chromium:917242
> Change-Id: If37ee122847b0c32604bb45dc2a1326b544f9cf6
> Reviewed-on: https://skia-review.googlesource.com/c/180644
> Commit-Queue: Michael Ludwig <michaelludwig@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
Bug: chromium:915025, chromium:917242
Change-Id: I98a1bf83fd7d393604823d567c57d7e06fad5e55
Reviewed-on: https://skia-review.googlesource.com/c/182203
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Chris Dalton <csmartdalton@google.com>
for f in $(git grep -l drawSimpleText); do
sed -i 's/wSimpleText(\([[:alnum:]]\), strlen(\1), kUTF8_SkTextEncoding,/wString(\1,/g' "$f"
sed -i 's/wSimpleText(\([[:alnum:]]*\)\.c_str(), \1\.size(), kUTF8_SkTextEncoding,/wString(\1,/g' "$f"
done
git checkout @~ include/core/SkCanvas.h samplecode/SampleCusp.cpp
git cl format
Change-Id: Ibc0c3afd30f86465a645fadb26177d61919f57fd
Reviewed-on: https://skia-review.googlesource.com/c/181561
Reviewed-by: Hal Canary <halcanary@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
Auto-Submit: Hal Canary <halcanary@google.com>
This is a reland of 6a3dc8be46
Original change's description:
> ccpr: Support caching of paths that span multiple tiles
>
> Adds an accumulative "hit rect" for each cache entry that tracks the
> region of the path that has been drawn during its lifetime. Now, a
> path mask can be cached once the "hit rect" covers 50% of the path.
> This allows us to cache a path that spans multiple tiles.
>
> To guard against unnecessarily caching gigantic path masks, we also
> require that 10% of the path be visible during the draw when it is
> cached.
>
> Bug: skia:8462
> Change-Id: Iab2c277102b7a774eaa909c9663211694554c5a5
> Reviewed-on: https://skia-review.googlesource.com/c/180700
> Commit-Queue: Chris Dalton <csmartdalton@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
Bug: skia:8462
Change-Id: Ia2b10430acd2dffac78b5abd432763ead79bc902
Reviewed-on: https://skia-review.googlesource.com/c/181983
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
This reverts commit 6f44647e52.
Reason for revert: checking to see if this is blocking the Chrome roll
Original change's description:
> Make SkBitmap/SkPixmap::erase* do so in sRGB
>
> We generally consider untagged colors to be sRGB, so this makes us more
> consistent with other parts of the API.
>
> Add a test.
>
> Cq-Include-Trybots: luci.chromium.try:linux-blink-rel
> Change-Id: I5468c86ad92164797a65ffd9fbe471e01a97a2ca
> Reviewed-on: https://skia-review.googlesource.com/c/179245
> Commit-Queue: Leon Scroggins <scroggo@google.com>
> Reviewed-by: Mike Reed <reed@google.com>
> Reviewed-by: Mike Klein <mtklein@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
TBR=djsollen@google.com,mtklein@google.com,scroggo@google.com,brianosman@google.com,reed@google.com
Change-Id: Ia592adf2c790d294da1e32c1e83f9f34e81d79cc
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Cq-Include-Trybots: luci.chromium.try:linux-blink-rel
Reviewed-on: https://skia-review.googlesource.com/c/182083
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This reverts commit 6a3dc8be46.
Reason for revert: <INSERT REASONING HERE>
Original change's description:
> ccpr: Support caching of paths that span multiple tiles
>
> Adds an accumulative "hit rect" for each cache entry that tracks the
> region of the path that has been drawn during its lifetime. Now, a
> path mask can be cached once the "hit rect" covers 50% of the path.
> This allows us to cache a path that spans multiple tiles.
>
> To guard against unnecessarily caching gigantic path masks, we also
> require that 10% of the path be visible during the draw when it is
> cached.
>
> Bug: skia:8462
> Change-Id: Iab2c277102b7a774eaa909c9663211694554c5a5
> Reviewed-on: https://skia-review.googlesource.com/c/180700
> Commit-Queue: Chris Dalton <csmartdalton@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
TBR=bsalomon@google.com,robertphillips@google.com,brianosman@google.com,csmartdalton@google.com
Change-Id: Ibae9d46333e3178856fd623f26317366102dd344
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:8462
Reviewed-on: https://skia-review.googlesource.com/c/181982
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
We generally consider untagged colors to be sRGB, so this makes us more
consistent with other parts of the API.
Add a test.
Cq-Include-Trybots: luci.chromium.try:linux-blink-rel
Change-Id: I5468c86ad92164797a65ffd9fbe471e01a97a2ca
Reviewed-on: https://skia-review.googlesource.com/c/179245
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Adds an accumulative "hit rect" for each cache entry that tracks the
region of the path that has been drawn during its lifetime. Now, a
path mask can be cached once the "hit rect" covers 50% of the path.
This allows us to cache a path that spans multiple tiles.
To guard against unnecessarily caching gigantic path masks, we also
require that 10% of the path be visible during the draw when it is
cached.
Bug: skia:8462
Change-Id: Iab2c277102b7a774eaa909c9663211694554c5a5
Reviewed-on: https://skia-review.googlesource.com/c/180700
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
This is a reland of d6fa45472c
Original change's description:
> ccpr: Rework the path cache to support sporadic flushing
>
> Removes the notion of a stashed atlas that we store from the previous
> flush. Now we just cache every atlas we ever render. Cached atlases
> can either be 16-bit or 8-bit.
>
> The "reuse" and "animation" cases should both behave exactly the same
> as before: Where before we would copy from the stashed atlas to 8-bit
> atlases, we now copy from a cached 16-bit atlas and then invalidate
> it. Where before we would recycle the stashed atlas's backing texture
> object, we now recycle this same texture object from an invalidated
> 16-bit cached atlas.
>
> The main difference is that cases like tiled rendering now work. If
> you draw your whole scene in one flush, you still get one big 16-bit
> cached atlas, just like the "stashed atlas" implementation. But if you
> draw your scene in tiles, you now get lots of little cached 16-bit
> atlases, which can be reused and eventually copied to 8-bit atlases.
>
> Bug: skia:8462
> Change-Id: Ibae65febb948230aaaf1f1361eef9c8f06ebef18
> Reviewed-on: https://skia-review.googlesource.com/c/179991
> Commit-Queue: Chris Dalton <csmartdalton@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
Bug: skia:8462
Change-Id: I2f64b0c37e2cd644a202dfc786366dda5d238391
Reviewed-on: https://skia-review.googlesource.com/c/181450
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Moved named common transfer functions and gamuts to constexpr values in
SkColorSpace.h, in SkNamedTransferFn and SkNamedGamut namespaces.
Converted nearly all SkColorSpace::MakeRGB calls within Skia to use the
new factory with the named values. Multiple clients want a way to
extract named transfer function and gamut - this still doesn't provide
that, but this may be a better path forward for honestly advertising how
SkColorSpace works internally.
Originally landed as:
https://skia.googlesource.com/skia/+/a9549ab31630fc244094e6f1692371cbaf87f666
Re-landing with a new serialization format, but maintaining ability to
load old serialized color spaces, for SKP compatibility.
Bug: skia:
Change-Id: Ib84a6e1cd5d7d9816175773fdbaff2ca32658667
Reviewed-on: https://skia-review.googlesource.com/c/181176
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit d6fa45472c.
Reason for revert: Assertion failures
Original change's description:
> ccpr: Rework the path cache to support sporadic flushing
>
> Removes the notion of a stashed atlas that we store from the previous
> flush. Now we just cache every atlas we ever render. Cached atlases
> can either be 16-bit or 8-bit.
>
> The "reuse" and "animation" cases should both behave exactly the same
> as before: Where before we would copy from the stashed atlas to 8-bit
> atlases, we now copy from a cached 16-bit atlas and then invalidate
> it. Where before we would recycle the stashed atlas's backing texture
> object, we now recycle this same texture object from an invalidated
> 16-bit cached atlas.
>
> The main difference is that cases like tiled rendering now work. If
> you draw your whole scene in one flush, you still get one big 16-bit
> cached atlas, just like the "stashed atlas" implementation. But if you
> draw your scene in tiles, you now get lots of little cached 16-bit
> atlases, which can be reused and eventually copied to 8-bit atlases.
>
> Bug: skia:8462
> Change-Id: Ibae65febb948230aaaf1f1361eef9c8f06ebef18
> Reviewed-on: https://skia-review.googlesource.com/c/179991
> Commit-Queue: Chris Dalton <csmartdalton@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
TBR=bsalomon@google.com,robertphillips@google.com,csmartdalton@google.com
Change-Id: Iad74a14fcb09da12f32b9b78f803b8472a5d60ae
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:8462
Reviewed-on: https://skia-review.googlesource.com/c/181444
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Removes the notion of a stashed atlas that we store from the previous
flush. Now we just cache every atlas we ever render. Cached atlases
can either be 16-bit or 8-bit.
The "reuse" and "animation" cases should both behave exactly the same
as before: Where before we would copy from the stashed atlas to 8-bit
atlases, we now copy from a cached 16-bit atlas and then invalidate
it. Where before we would recycle the stashed atlas's backing texture
object, we now recycle this same texture object from an invalidated
16-bit cached atlas.
The main difference is that cases like tiled rendering now work. If
you draw your whole scene in one flush, you still get one big 16-bit
cached atlas, just like the "stashed atlas" implementation. But if you
draw your scene in tiles, you now get lots of little cached 16-bit
atlases, which can be reused and eventually copied to 8-bit atlases.
Bug: skia:8462
Change-Id: Ibae65febb948230aaaf1f1361eef9c8f06ebef18
Reviewed-on: https://skia-review.googlesource.com/c/179991
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
When parsing numbers with long decimals, the fast-path decimal factor
may collapse to zero. Catch this condition (and defer to the slow parse
path).
Bug: skia:8499
Change-Id: I4e364402aecdcca9558d027a55ff297170e2a195
Reviewed-on: https://skia-review.googlesource.com/c/181179
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Florin Malita <fmalita@chromium.org>
This is slightly preemptive, since paint still has getters/setters for
these fields, but skia no longer looks at them, so...
Reduces serial size by 20-bytes + size of a typeface
Bug: skia:2664
Change-Id: If1997c823db5b3d83b04cb7e1bc1d6787795b70a
Reviewed-on: https://skia-review.googlesource.com/c/181174
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
This reverts commit a9549ab316.
Reason for revert: SKPs changed?
Original change's description:
> Add SkColorSpace factory from 3x3 row-major gamut and transfer function
>
> Moved named common transfer functions and gamuts to constexpr values in
> SkColorSpace.h, in SkNamedTransferFn and SkNamedGamut namespaces.
>
> Converted nearly all SkColorSpace::MakeRGB calls within Skia to use the
> new factory with the named values. Multiple clients want a way to
> extract named transfer function and gamut - this still doesn't provide
> that, but this may be a better path forward for honestly advertising how
> SkColorSpace works internally.
>
> Bug: skia:
> Change-Id: I9296d67e8f0dab5ceb49869cb3ba24e98a05f3c4
> Reviewed-on: https://skia-review.googlesource.com/c/180360
> Reviewed-by: Mike Klein <mtklein@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Brian Osman <brianosman@google.com>
TBR=mtklein@google.com,brianosman@google.com,reed@google.com
Change-Id: Ie888f877b3c1dba33e1a8c0f5fa92594628de7fb
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/c/181300
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit 5820b0c3f3.
Reason for revert: Unanticipated gold image differences and performance regressions
Original change's description:
> Use specialized quad lists in rectangle ops
>
> Hopefully reduces memory footprint of GrFillRectOp and GrTextureOp
>
> The original rect code (GrAAFillRectOp) stored 2 SkMatrices (18 floats), 2
> SkRects (8 floats) an SkPMColor4f (4 floats) and a flag (1 int) for a total
> of 124 bytes per quad that was stored in the op.
>
> The first pass at the rectangle consolidation switched to storing device and
> local quads as GrPerspQuads (32 floats), an SkPMColor4f (4 floats) and a flag
> (1 int) for a total of 148 bytes per quad. After landing, several memory
> regressions appeared in Chrome and our perf monitor.
>
> Several intertwined approaches are taken here. First, GrPerspQuad no longer
> caches 1/w, which makes a quad 12 floats instead of 16. Second, a specialized
> list type is defined that allows storing the x, y, and extra metadata together
> for quads, but keeps the w components separate. When the quad type isn't
> perspective, w is not stored at all since it is implicitly 1 and can be
> reconstituted at tessellation time. This brings the total per quad to either
> 84 or 116 bytes, depending on if the op list needs perspective information.
>
> Bug: chromium:915025
> Bug: chromium:917242
> Change-Id: If37ee122847b0c32604bb45dc2a1326b544f9cf6
> Reviewed-on: https://skia-review.googlesource.com/c/180644
> Commit-Queue: Michael Ludwig <michaelludwig@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
TBR=robertphillips@google.com,csmartdalton@google.com,michaelludwig@google.com
Change-Id: I6067b6c0e103d08787626a0a8eff753a0f0c97b6
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:915025, chromium:917242
Reviewed-on: https://skia-review.googlesource.com/c/181167
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Moved named common transfer functions and gamuts to constexpr values in
SkColorSpace.h, in SkNamedTransferFn and SkNamedGamut namespaces.
Converted nearly all SkColorSpace::MakeRGB calls within Skia to use the
new factory with the named values. Multiple clients want a way to
extract named transfer function and gamut - this still doesn't provide
that, but this may be a better path forward for honestly advertising how
SkColorSpace works internally.
Bug: skia:
Change-Id: I9296d67e8f0dab5ceb49869cb3ba24e98a05f3c4
Reviewed-on: https://skia-review.googlesource.com/c/180360
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Hopefully reduces memory footprint of GrFillRectOp and GrTextureOp
The original rect code (GrAAFillRectOp) stored 2 SkMatrices (18 floats), 2
SkRects (8 floats) an SkPMColor4f (4 floats) and a flag (1 int) for a total
of 124 bytes per quad that was stored in the op.
The first pass at the rectangle consolidation switched to storing device and
local quads as GrPerspQuads (32 floats), an SkPMColor4f (4 floats) and a flag
(1 int) for a total of 148 bytes per quad. After landing, several memory
regressions appeared in Chrome and our perf monitor.
Several intertwined approaches are taken here. First, GrPerspQuad no longer
caches 1/w, which makes a quad 12 floats instead of 16. Second, a specialized
list type is defined that allows storing the x, y, and extra metadata together
for quads, but keeps the w components separate. When the quad type isn't
perspective, w is not stored at all since it is implicitly 1 and can be
reconstituted at tessellation time. This brings the total per quad to either
84 or 116 bytes, depending on if the op list needs perspective information.
Bug: chromium:915025
Bug: chromium:917242
Change-Id: If37ee122847b0c32604bb45dc2a1326b544f9cf6
Reviewed-on: https://skia-review.googlesource.com/c/180644
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
- avoid using legacy paint->font converter
- call out that drawText exists just for testing
- simplify drawText to assume UTF8
Bug: skia:
Change-Id: Ide14d8581d4744827d2282e7983cc5e19070b21e
Reviewed-on: https://skia-review.googlesource.com/c/180641
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Before, we could only wait for all reserved objects to serialize.
The new unit test `SkPDF_abort_jobs` crashed before this change.
Change-Id: Ia2fcb33251c6c32c125f631ed3eeb619f616bef3
Reviewed-on: https://skia-review.googlesource.com/c/179856
Auto-Submit: Hal Canary <halcanary@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Skia can now build if we mark drawPosText as private,
Will hide/remove next (after Chrome CL)
Bug: skia:
Change-Id: I156560b025c119af302545bb5bd60678f7b8e8f7
Reviewed-on: https://skia-review.googlesource.com/c/179985
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Auto-Submit: Mike Reed <reed@google.com>
Paths to intersect have two nearly coincident cubics. Where they
cross, the intersection error makes the curves start at slightly
different points. To sort the intersection, one curve is translated
to the start of the opposite point, moving it from one side to the
other, introducing a winding error.
The fix looks for that error in a very tiny range (enlarging that
range causes other tests that now pass to fail). This fix is very
fragile and points to the need for a better approach than sorting
angles to find winding values, as documented in the bug.
Also renamed some angle functions to show that they operate only
on lines and not general curves.
All tests pass with this fix:
./out/release/pathops_unittest -V -x
./out/debug/pathops_unittest -V -x
TBR=reed@google.com
Bug: skia:8380
Change-Id: I04e53d4c6a96035f661a4c9f31a17055ce13e3eb
Reviewed-on: https://skia-review.googlesource.com/c/179241
Commit-Queue: Cary Clark <caryclark@skia.org>
Reviewed-by: Cary Clark <caryclark@skia.org>
This reverts commit 576633cf57.
Fix: add new version to both variants of SkReadBuffer
Bug: skia:
Change-Id: I8ba60d374860718402328398a4a09b8c97d65e33
Reviewed-on: https://skia-review.googlesource.com/c/179845
Commit-Queue: Mike Reed <reed@google.com>
Auto-Submit: Mike Reed <reed@google.com>
Reviewed-by: Mike Reed <reed@google.com>
This reverts commit f1ae66bedd.
Reason for revert: need to guard for no-serialization builds (I think)
Original change's description:
> serialize fonts instead of paints
>
> Some changes from before:
> - we don't force serializing a typeface if the field is null
> - we don't serialize the blob bounds (don't trust them)
>
> Bug: skia:
> Change-Id: I41281b2aa63a1026de87330023346f1da5378c1f
> Reviewed-on: https://skia-review.googlesource.com/c/179735
> Commit-Queue: Mike Reed <reed@google.com>
> Reviewed-by: Florin Malita <fmalita@chromium.org>
> Reviewed-by: Herb Derby <herb@google.com>
TBR=bungeman@google.com,herb@google.com,fmalita@chromium.org,reed@google.com
Change-Id: Id891198bc683b9b5e7417a30c2f7adb0bd978e30
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/c/179843
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Some changes from before:
- we don't force serializing a typeface if the field is null
- we don't serialize the blob bounds (don't trust them)
Bug: skia:
Change-Id: I41281b2aa63a1026de87330023346f1da5378c1f
Reviewed-on: https://skia-review.googlesource.com/c/179735
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Reviewed-by: Herb Derby <herb@google.com>
This reverts commit fdcbe206f5.
Reason for revert: Produced a further perf regression.
Original change's description:
> Tweak Plot size to try to get better perf.
>
> Large plots allow tighter packing of large glyphs, but smaller plots
> take less time to update. Trying a size in between for the largest
> A8 size.
>
> Bug: skia:8642
> Change-Id: Ib6d7651b70fe3a2101a3bfc5b367c433123cb914
> Reviewed-on: https://skia-review.googlesource.com/c/179242
> Commit-Queue: Jim Van Verth <jvanverth@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
TBR=jvanverth@google.com,robertphillips@google.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: skia:8642
Change-Id: I9bc32abfae1fb4a6380b2fd5c0a1ea269447c534
Reviewed-on: https://skia-review.googlesource.com/c/179726
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
* sed 's/sk_sp<SkPDF\(Object\|Array\|Dict\)>/std::unique_ptr<SkPDF\1>/g'
* Added SkPDFMakeDict()
* Let SkPDFMakeArray() take zero arguments.
Bug: skia:8630
Change-Id: I08dc11e974f1d71e09a33af6bdbcb5f01b07d186
Reviewed-on: https://skia-review.googlesource.com/c/179063
Commit-Queue: Hal Canary <halcanary@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Auto-Submit: Hal Canary <halcanary@google.com>
A proc can be registered with a GrTexture. The proc will be called when
it is safe to delete the texture is "idle." Idle means it referred to
outside of GrResourceCache and that the I/O operations on the GPU are
completed (this latter part applieas to Vulkan only).
The intended use case for this is to call promise image texture release
procs once we start caching GrTextures for deinstantiated promise
images.
Bug= skia:8613
Change-Id: Idce9a4292fef7b15370a053060d8878a9d6828fa
Reviewed-on: https://skia-review.googlesource.com/c/178937
Reviewed-by: Greg Daniel <egdaniel@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Large plots allow tighter packing of large glyphs, but smaller plots
take less time to update. Trying a size in between for the largest
A8 size.
Bug: skia:8642
Change-Id: Ib6d7651b70fe3a2101a3bfc5b367c433123cb914
Reviewed-on: https://skia-review.googlesource.com/c/179242
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
It's probably nicer to draw these images than not draw them.
Cq-Include-Trybots: luci.chromium.try:linux-blink-rel
Change-Id: I9f8df081c8256d345ad2d8bbbb30dbad982ad94e
Reviewed-on: https://skia-review.googlesource.com/c/178981
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
All PDF Streams are immediatly serialized, and are never long-lived
in memory.
if EXPERIMENTAL fExecutor is set on the Document, streams are
compressed in parallel.
Results for PDFBigDocBench:
without patch 1807885.01 μs
with patch without executor 1802808.35 μs
with patch with executor 246313.72 μs
SkPDFStreamOut() function replaces SkPDFStream classes.
Page resources are all serialized early.
Several Document-level objects are serialzied early.
SkUUID introduced as top-level object.
Many {insert|append}ObjRef() converted to memory efficient
{insert|append}Ref().
Bug: skia:8630
Change-Id: Ic336917d0c8b9ac1c2423b43bfe9b49a3533fbff
Reviewed-on: https://skia-review.googlesource.com/c/176588
Auto-Submit: Hal Canary <halcanary@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
I've removed a bunch of unused code,
inlined routines that are only used once,
removed platform code where a portable code works fine,
and renamed methods and updated comments.
I'm thinking about getting rid of Sk4px entirely, and boiling it down
instead to a couple helper methods on Sk16b/Sk16h. This is a start.
Change-Id: I35b6c44710aa2cefe8c1e07fc2cb877a4042e8a5
Reviewed-on: https://skia-review.googlesource.com/c/178985
Auto-Submit: Mike Klein <mtklein@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Reviewed-by: Herb Derby <herb@google.com>
This flag is annoying to set correctly when writing test code.
Fortunately it has become redundant with the "is GL FBO 0" flag.
Change-Id: Ifd88292d2d6ea05bfe0d269e853baff857e70bfe
Reviewed-on: https://skia-review.googlesource.com/c/178929
Reviewed-by: Greg Daniel <egdaniel@google.com>
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This test used to assert/fail under ASAN because copyPath's
fLastMoveToIndex was garbage after the internal copy (in SkPath::transform).
Now the code sets it to the src's value.
Bug:883596
Change-Id: I3cba82fb63398bf4aa0abc9d3f2a0067d8ad9006
Reviewed-on: https://skia-review.googlesource.com/c/178931
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Reed <reed@google.com>
The current system works if all the DDLs (generated from a single DDL Recorder) are all replayed into the same surface but would probably fail otherwise.
Change-Id: I07fb0ca9ecfb7a6aa27766bdb62e5b41311021d4
Reviewed-on: https://skia-review.googlesource.com/c/178900
Commit-Queue: Brian Salomon <bsalomon@google.com>
Auto-Submit: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
This reverts commit 99e1709ef5.
Reason for revert: DDL failures
Original change's description:
> Fix recording multiple DDLs from a single DDL Recorder
>
> The current system works if all the DDLs (generated from a single DDL Recorder) are all replayed into the same surface but would probably fail otherwise.
>
> Change-Id: I0e76ecbf36aa3975049e4f48aaadd35b113a22eb
> Reviewed-on: https://skia-review.googlesource.com/c/178260
> Commit-Queue: Robert Phillips <robertphillips@google.com>
> Reviewed-by: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com,robertphillips@google.com
Change-Id: I958c0419647eee4be621bd09c2421ff3801ffe71
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/178860
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
The current system works if all the DDLs (generated from a single DDL Recorder) are all replayed into the same surface but would probably fail otherwise.
Change-Id: I0e76ecbf36aa3975049e4f48aaadd35b113a22eb
Reviewed-on: https://skia-review.googlesource.com/c/178260
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Change-Id: I784e85cb154be077a1ca1949d7806ac95269d8c8
Reviewed-on: https://skia-review.googlesource.com/c/178281
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Moves method to get GrBackendFormat from GrBackendTexture from GrCaps
to GrBackendTexture so that a GrContext is not required.
Uses kUnknown_GrPixelConfig as failure return from GrCaps functions
rather than an GrPixelConfig* out param and bool result.
Having the texture type be part of GrBackendFormat made removing the
GrCaps function that goes from GrBackendRenderTarget to GrPixelConfig
awkward so that was left alone for now.
Change-Id: If9be0f898c538be4a7b24022b6011f63441a0317
Reviewed-on: https://skia-review.googlesource.com/c/175991
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Uses a fixed quantized table to compute the ARGB texture dimensions,
and compute the A8 dimensions from that. Plot sizes are computed
based on the respective atlas's dimensions.
Bug: skia:
Change-Id: I28c56557094efa49d1a011a1d6145ef3a79b7cac
Reviewed-on: https://skia-review.googlesource.com/c/177068
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Remove SkPathPriv::IsConvex() if SK_LEGACY_PATH_CONVEXITY
is defined to fix the Google3 roll.
TBR=ethannicholas@google.com
Bug: skia:
Change-Id: I2d2177213ec43dd048f15685d0afe49fb07656fe
Reviewed-on: https://skia-review.googlesource.com/c/177680
Commit-Queue: Cary Clark <caryclark@google.com>
Auto-Submit: Cary Clark <caryclark@google.com>
Reviewed-by: Cary Clark <caryclark@google.com>
With skia_use_wuffs=true, calling getFrameCount after the partial
decode results in the full decode failing.
Bug: skia:8235
Change-Id: I9ac5496e3fecf309f1e303a8d3e8725a6d00731b
Reviewed-on: https://skia-review.googlesource.com/c/176590
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Nigel Tao <nigeltao@google.com>
Chrome added a public method to validate SkPathRef,
but always called it when validating SkPath. We did too.
Remove the SkPathRef entry point, validate SkPathRef
when validating SkPath, and remove Skia's callers.
(Chrome has already been fixed.)
TBR=reed@google.comR=fmalita@chromium.org
Bug:913930
Change-Id: I0828b00b42cc1f031b4216ddeace50f80aa21e62
Reviewed-on: https://skia-review.googlesource.com/c/177065
Commit-Queue: Cary Clark <caryclark@skia.org>
Auto-Submit: Cary Clark <caryclark@skia.org>
Reviewed-by: Florin Malita <fmalita@chromium.org>
This separates the existing convexity logic into
two passes. The first pass detects concavity by
counting the changes in direction.
The second pass computes the cross product to
see that all angles bend in the same direction, and
computes the dot product to see if the angle
doubles back on itself.
The second pass treats axis-aligned vectors
separately, and computes the dot and cross products
by comparing point values; it does not use arithmetic
to determine convexity, so it works with all finite
values.
A compile time switch enables returning concave
for co-linear diagonal points:
If successive points are not axis-aligned, and
those points are co-linear along a diagonal;
the path is treated as concave. This is conservative
but avoids paths that change convexity when the
are translated or scaled, since transforming the
path may cause the midpoint to shift to either
side of a line formed by the endpoints.
The compile time switch is set so that co-linear
diagonal points do not affect convexity. Note that
this permits shapes formerly considered concave, such
as stroked lines with round caps, to become convex;
this accounts for many of the GM differences.
A path may double back on itself and be convex;
for instance, a path containing a single line.
Path may have multiple initial moveTo verbs, or
trailing moveTo verbs, and still evaluate as convex.
A separate entry point, SkPathPriv::IsConvex()
allows passing an array of points instead of a path.
A legacy define has been checked into Chrome to
use the old code until layout tests have been
rebaselined.
R=reed@google.com,bsalomon@google.com
Bug:899689
Change-Id: I392bbe04836ffb19666ad92ab2a2404c56543019
Reviewed-on: https://skia-review.googlesource.com/c/173427
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Cary Clark <caryclark@google.com>
Commit-Queue: Cary Clark <caryclark@skia.org>
If getPixels returns an unexpected result, do not create a digest
and compare it to digests for premul and unpremul.
Print a better error message, including the name of the image and
string versions of the SkCodec::Result.
Change-Id: Ie98e350a1ef91c0745fe9de0855192e5793e033c
Reviewed-on: https://skia-review.googlesource.com/c/176582
Auto-Submit: Leon Scroggins <scroggo@google.com>
Reviewed-by: Nigel Tao <nigeltao@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
- add drop-in clang-tidy cxx wrapper
- get build clean for bugprone-use-after-move
The wrapper can be used by setting
cxx = "/path/to/skia/tools/clang-tidy.sh"
in GN.
Change-Id: Idbba911e23bd6ef7530b08fd31906b92c1c1b28c
Reviewed-on: https://skia-review.googlesource.com/c/176523
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
This reverts commit e7f165be2e.
Reason for revert: doesn't compile in google3
Original change's description:
> Treat kWEBP encode with quality=100 as lossless
>
> In SkEncodeImage and friends, treat quality of 100 as a lossless encode
> when using kWEBP. This seems a good fit for the intent - which is
> presumably to save the highest quality image. This also matches
> Chromium's blink::ImageEncoder::ComputeWebpOptions, which treats a
> quality of 1 (on a float scale from 0 to 1) as a lossless encode.
>
> FWIW, Chromium has had this behavior since
> https://codereview.chromium.org/1937433002, in response to
> crbug.com/523098. The goal is to "maintain sharpness to
> match the JPEG encoder behavior (use WEBP lossless encoding)".
>
> Add a test to verify the new behavior. This requires making tests
> depend on libwebp to use WebPGetFeatures, since the Skia API does not
> provide a way to determine whether an encoded webp file was encoded
> lossless-ly or lossily.
>
> Bug: skia:8586
> Change-Id: Ie9e09c2f7414ab701d696c4ad9edf405868a716f
> Reviewed-on: https://skia-review.googlesource.com/c/175823
> Commit-Queue: Leon Scroggins <scroggo@google.com>
> Reviewed-by: Derek Sollenberger <djsollen@google.com>
> Reviewed-by: Mike Reed <reed@google.com>
TBR=djsollen@google.com,scroggo@google.com,reed@google.com
Change-Id: I91680f65a2a5e6f0a13b84e97c9541ebe0606b33
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:8586
Reviewed-on: https://skia-review.googlesource.com/c/176584
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Bug: skia:
Change-Id: Iee57bc970a026de2ad5a0758153e9cbb20753fa1
Reviewed-on: https://skia-review.googlesource.com/c/173105
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
In SkEncodeImage and friends, treat quality of 100 as a lossless encode
when using kWEBP. This seems a good fit for the intent - which is
presumably to save the highest quality image. This also matches
Chromium's blink::ImageEncoder::ComputeWebpOptions, which treats a
quality of 1 (on a float scale from 0 to 1) as a lossless encode.
FWIW, Chromium has had this behavior since
https://codereview.chromium.org/1937433002, in response to
crbug.com/523098. The goal is to "maintain sharpness to
match the JPEG encoder behavior (use WEBP lossless encoding)".
Add a test to verify the new behavior. This requires making tests
depend on libwebp to use WebPGetFeatures, since the Skia API does not
provide a way to determine whether an encoded webp file was encoded
lossless-ly or lossily.
Bug: skia:8586
Change-Id: Ie9e09c2f7414ab701d696c4ad9edf405868a716f
Reviewed-on: https://skia-review.googlesource.com/c/175823
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Reviewed-by: Mike Reed <reed@google.com>
This reverts commit a34e6eac3c.
Reason for revert: Broken gold images on Adreno 530 and 540
Original change's description:
> Fix performance regresion on Mali, while preserving sk_FragCoord.w
>
> Bug: skia:
> Change-Id: I9269288bbb861cd02efa7b5dfe2c9434ec39064e
> Reviewed-on: https://skia-review.googlesource.com/c/174309
> Commit-Queue: Michael Ludwig <michaelludwig@google.com>
> Reviewed-by: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com,michaelludwig@google.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: skia:
Change-Id: Id344219c101564a5fd06477895386fad2d8dfa78
Reviewed-on: https://skia-review.googlesource.com/c/175986
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
This fixes a crash we saw when we switch vulkan copies as draws to creating
their own secondary command buffer. The crash came from the perf blendmode
tests when using an advanced blend mode. They would do 1000 draws which forced
us into creating 2000 command buffers (since the dst copies and the normal draws
each used them). I tested without the copies as draws change and just increasing
the total number of draws we do and was able to repro the crash.
Besides fixing the above OOM crash, I am also seeing a 5-10% perf gain on the
blendmode micro benches which is nice
Bug: skia:
Change-Id: I9266ea0ba02a755f54dabd4ee804963ab0c9b684
Reviewed-on: https://skia-review.googlesource.com/c/175436
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
Uninstantiated: a state of not being instantiated.
Deinstantiate: transition from instantiated to uninstantiated state.
Change-Id: Id7b6b295267674a9915f95105d73fabfcc3555de
Reviewed-on: https://skia-review.googlesource.com/c/175586
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Bug: skia:
Change-Id: I365c82a058c97e8741ee91e999cb6faab5a5ecf5
Reviewed-on: https://skia-review.googlesource.com/c/175422
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Follow-ups assuming this sticks:
- remove client overrides, so we can remove the (empty) base class virtuals
- mark as obsolete the .skp enums for these entrypoints, and note date
- remove glyphrunlist helpers that now may not have any callers
- remove DrawCommands related to these entrypoints
Bug: skia:
Change-Id: I44b4e6ef3bee61911e77b9b2ab73f82c0817536a
Reviewed-on: https://skia-review.googlesource.com/c/175240
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Reviewed-by: Herb Derby <herb@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
Bug: skia:
Change-Id: I9269288bbb861cd02efa7b5dfe2c9434ec39064e
Reviewed-on: https://skia-review.googlesource.com/c/174309
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
This reverts commit 10273c1d5f.
Reason for revert: bad gms
Original change's description:
> Use unnormalized coords all the way through with GL_TEXTURE_RECTANGLE textures.
>
> We used to unnormalize them in the shader via SkSL.
>
> This allows us to support GL_TEXTURE_RECTANGLE without having textureSize()
> available in GLSL.
>
> Change-Id: Ibe63a302228811933ef000251db4cad9aaf4f2ea
> Reviewed-on: https://skia-review.googlesource.com/c/174068
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com,brianosman@google.com
Change-Id: I9bf38e1040578becba28ac8cccd81e2af2844278
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/175252
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Bug: skia:7903
Change-Id: I69b65fc1cfcc2cc5045bb3b75395f9a256ade278
Reviewed-on: https://skia-review.googlesource.com/c/172979
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Read only textures and proxies fail writePixels, as copy dsts, and mip
regeneration.
Bug: skia:8509
Change-Id: Iaa0b473cc9a9930fde3ef0e91373d5040650de35
Reviewed-on: https://skia-review.googlesource.com/c/174316
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
We used to unnormalize them in the shader via SkSL.
This allows us to support GL_TEXTURE_RECTANGLE without having textureSize()
available in GLSL.
Change-Id: Ibe63a302228811933ef000251db4cad9aaf4f2ea
Reviewed-on: https://skia-review.googlesource.com/c/174068
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Bug: skia:8579
Zero-initialize the pixel buffer that wuffs uses inside the frame rect.
If the encoded image is incomplete, we will swizzle this memory into the
destination, so this prevents swizzling uninitialized memory.
In addition, zero-initialize the client's memory if the above buffer
will not fill it, and if the frame is independent.
Move decodeFrameConfig into onStartIncrementalDecode. This makes it
clear that we haven't begun decoding the pixels so rowsDecoded is
irrelevant. Update the documentation for onStartIncrementalDecode to
make it clear that it can be called more than once (and when to do so).
If a frame is incomplete and depends on prior frames, do not blend it.
This will overwrite pixels from the prior frames without a way to undo.
Current clients only want to show incomplete images for the first frame
anyway.
Add some debugging information to Codec_partialAnim test, including
writing out pngs when failing the test.
TBR=djsollen@google.com for documentation change in SkCodec.h
Change-Id: I85c8ca4075301306f4738ddfc2f5992a5745108b
Reviewed-on: https://skia-review.googlesource.com/c/174310
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Nigel Tao <nigeltao@google.com>
Change-Id: I4960b1cd055daf44637e95825f82cb7fe2ce134a
Reviewed-on: https://skia-review.googlesource.com/c/174285
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Bug: skia:
Change-Id: I11ff57dca2c48519bc3a23e36da01bf40d1b329c
Reviewed-on: https://skia-review.googlesource.com/c/174221
Commit-Queue: Mike Reed <reed@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Auto-Submit: Mike Reed <reed@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Bug: skia:8410 chromium:876349
Change-Id: Ib97c82cd165f7e2f2e94c65fc307220b99053df3
Reviewed-on: https://skia-review.googlesource.com/c/174065
Commit-Queue: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Bug: skia:
Change-Id: I04b6cbfe083c32a25205e04a4b15672d4b678a9c
Reviewed-on: https://skia-review.googlesource.com/c/174063
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
In theory, a convex shape is still convex if transformed by an affine
matrix. However, SkPath segments are specified using floats, and attributes
like collinearity can break under some transforms due to finite precision.
Computing convexity is non-trivial, so there is value in SkPath caching this
calculation. Convexity is useful, as both the CPU and GPU backends can draw
convex shapes faster than non-convex.
To balance these two (fragile float math and value of caching convexity),
this CL invalidates this cached state if the transform could change convexity.
In the general case, it is assumed that convexity could change. Special cases
where it is safe to keep the cached state after transform are:
- identity transform
- scale/translate transform if the path is known to be axis-aligned
All other combinations invalidate the cached state, forcing it to be
recomputed.
"axis-aligned" means the segments in the path are all axis-aligned, horizontal
or vertical (e.g. a rect or rrect)
Bug: 899689
Change-Id: I1381273eaff61d6b7134ae94b4f251c69991081a
Reviewed-on: https://skia-review.googlesource.com/c/173226
Commit-Queue: Ravi Mistry <rmistry@google.com>
Reviewed-by: Cary Clark <caryclark@google.com>
This reverts commit 26d8d77aae.
Reason for revert: speculative, in case this is blocking the chrome roll
Original change's description:
> don't trust convexity with affine transforms
>
> In theory, a convex shape transformed by an affine matrix should still
> be convex. However, due to numerical nastiness of floats, when we try
> to determine if something is convex, we can get different answers pre
> and post a transformation (think of two line segments nearly colinear).
>
> Convex paths take a faster scan converter, but it is only well behaved
> if the path is, in fact, convex. Thus we have to be conservative about
> which paths we mark as convex.
>
> This bug found a case where a "convex" path, after going through a transform,
> became (according to our measure) non-convex. The bug was that we *thought*
> that once convex always convex, but in reality it was not. The fix (hack) is
> to notice when we transform by an affine matrix (we're still assuming/hoping
> that scaling and translate keep things convex (1)...) and mark the convexity
> as "unknown", forcing us to re-compute it.
>
> This will slow down these paths, since it costs something to compute convexity.
> Hopefully non-scale-translate transforms are rare, so we won't notice the
> speed loss too much.
>
> (1) This is not proven. If we find scaling/translation to break our notion of
> convexity, we'll need to get more aggressive/clever to find a fix.
>
>
> Bug: 899689
> Change-Id: I5921eca247428bf89380bc2395fe373fa70deb1d
> Reviewed-on: https://skia-review.googlesource.com/c/173080
> Commit-Queue: Mike Reed <reed@google.com>
> Reviewed-by: Cary Clark <caryclark@google.com>
> Reviewed-by: Jim Van Verth <jvanverth@google.com>
TBR=mtklein@google.com,jvanverth@google.com,caryclark@google.com,reed@google.com,caryclark@skia.org
Change-Id: I5d846798f2c34c6576591a3c3125cfdc3c72dbdc
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: 899689
Reviewed-on: https://skia-review.googlesource.com/c/173162
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
In theory, a convex shape transformed by an affine matrix should still
be convex. However, due to numerical nastiness of floats, when we try
to determine if something is convex, we can get different answers pre
and post a transformation (think of two line segments nearly colinear).
Convex paths take a faster scan converter, but it is only well behaved
if the path is, in fact, convex. Thus we have to be conservative about
which paths we mark as convex.
This bug found a case where a "convex" path, after going through a transform,
became (according to our measure) non-convex. The bug was that we *thought*
that once convex always convex, but in reality it was not. The fix (hack) is
to notice when we transform by an affine matrix (we're still assuming/hoping
that scaling and translate keep things convex (1)...) and mark the convexity
as "unknown", forcing us to re-compute it.
This will slow down these paths, since it costs something to compute convexity.
Hopefully non-scale-translate transforms are rare, so we won't notice the
speed loss too much.
(1) This is not proven. If we find scaling/translation to break our notion of
convexity, we'll need to get more aggressive/clever to find a fix.
Bug: 899689
Change-Id: I5921eca247428bf89380bc2395fe373fa70deb1d
Reviewed-on: https://skia-review.googlesource.com/c/173080
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Cary Clark <caryclark@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
This should allow clients to include Skia and their vulkan files in any
order. However, it does require that when clients are building their
files that include skia with vulkan, they must have vulkan/vulkan_core.h
on their include path somewhere.
Bug: skia:
Change-Id: I969db396c92127be7c8df754926d175f38b8aafa
Reviewed-on: https://skia-review.googlesource.com/c/172147
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
Change-Id: I900a661f346a10dbd8002bfe383d1705138feb50
Reviewed-on: https://skia-review.googlesource.com/c/146401
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Bug: skia:
Change-Id: Ibd636b9e1bf932033c3161c862523f841cb85e79
Reviewed-on: https://skia-review.googlesource.com/c/171005
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
GrRenderTargetOpList maintains an array of op chains. When it receives a
new op it tries to add it to an existing chain, working backwards from
the end of the current array. If the op can be added to a chain it
additionally tries to merge the new op with ops already in the chain
before adding it to the tail of the chain.
In forward combining it tries to concatenate chains. If chains can
concatenate it also attempts to merge ops between the two chains.
Now op chaining results reported by Op subclasses must be transitive.
Moreover, if op A is able to merge with B then it must be the case that
any op that can chain with A will either merge or chain with any op that
can chain to B.
Bug: skia:8491
Change-Id: Ib6a2a669acd4257134a37d271289b8b3f247cd3f
Reviewed-on: https://skia-review.googlesource.com/c/170351
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Adds setVertexAttributes and setInstanceAttributes. These take a pointer
to the first attribute, and a count. The count is the total number of
possible attributes, though some may not be initialized. The base class
computes the number of initialized attributes, pre-computes the strides,
and only allows subsequent access to the initialized attributes.
The attributes need to be allocated contiguously. Some GPs place them in
an array, though most just place them as consecutive members, and pass
a pointer to the first one.
Indexed access would be possible, but now it makes more sense to iterate
over all attributes, so enable that, and use range-based for everywhere.
Completely remove the per-attribute offset helper (again - possible, but
not real helpful), and make the stride always available. In many ops,
just use the GP's computed stride, rather than re-computing it.
Bug: skia:
Change-Id: Ie4cccb7969a98ee5a10b373e714fbd702e875b3e
Reviewed-on: https://skia-review.googlesource.com/c/169241
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
edging settings are needed for metrics calls, as well as drawing, hence
we really have to include them in almost every SkFont call/usage, so I
guess we can just accept them as real.
This seems to imply that we have to document what happens in drawTextBlob,
since it has a bunch of SkFonts (runs) AND a paint. This is the situation
today of course, and I had hoped to simplify it, but I think I've failed.
Proposal dox for drawTextBlob.
drawTextBlob respects the paint when drawing the blog, but it IGNORES the
paint's antialias (and lcdrender) flags, as these are already specified in
the blob's runs.
Bug: skia:2664, skia:8494
Change-Id: I8f69186c9c337d98d058919f53b7901ff830a16e
Reviewed-on: https://skia-review.googlesource.com/c/170352
Auto-Submit: Mike Reed <reed@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
It *seems* that chrome only ever uses glyphs, so I hope we can skip the encoding parameter.
Bug: skia:
Change-Id: I3b6857ba6a37050a9fd0913a16b980bc45d54bda
Reviewed-on: https://skia-review.googlesource.com/c/170341
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
This is a reland of b07aba4214
Original change's description:
> Move remove ptr args to MakeRecAndEffects
>
> Move this conversion out through the transitive closure of calls. As you
> move up the stack, everything becomes refs instread of pointers.
>
> Reorder args of MakeRecAndEffects and setupCache to match the majority of other
> calls.
>
> Change-Id: I72baf457cd9140f76ee5f7122493284c4be5bcd0
> Reviewed-on: https://skia-review.googlesource.com/c/169765
> Reviewed-by: Ben Wagner <bungeman@google.com>
> Commit-Queue: Herb Derby <herb@google.com>
Change-Id: I2ff7f218ecc7b18ae6a2b293cecdb059eea77562
Reviewed-on: https://skia-review.googlesource.com/c/170222
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Herb Derby <herb@google.com>
This reverts commit b07aba4214.
Reason for revert: Changes GMs
Original change's description:
> Move remove ptr args to MakeRecAndEffects
>
> Move this conversion out through the transitive closure of calls. As you
> move up the stack, everything becomes refs instread of pointers.
>
> Reorder args of MakeRecAndEffects and setupCache to match the majority of other
> calls.
>
> Change-Id: I72baf457cd9140f76ee5f7122493284c4be5bcd0
> Reviewed-on: https://skia-review.googlesource.com/c/169765
> Reviewed-by: Ben Wagner <bungeman@google.com>
> Commit-Queue: Herb Derby <herb@google.com>
TBR=bungeman@google.com,herb@google.com
Change-Id: I29e54cea5b7b5709dd6db6816cb6556d73e003e0
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/170221
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Move this conversion out through the transitive closure of calls. As you
move up the stack, everything becomes refs instread of pointers.
Reorder args of MakeRecAndEffects and setupCache to match the majority of other
calls.
Change-Id: I72baf457cd9140f76ee5f7122493284c4be5bcd0
Reviewed-on: https://skia-review.googlesource.com/c/169765
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Herb Derby <herb@google.com>
SkBlend::RowFactory is only ever used to pass these function
pointers from SkBlitMask_D32.cpp to SkBlitMask_ARGB32.cpp,
so let's eliminate the middleman.
Change-Id: If74af775bb3cdc3eec9dc4ebeb180ac42b184a54
Reviewed-on: https://skia-review.googlesource.com/c/170062
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
This reverts commit 51b1c12bbc.
Reason for revert: reverting till flutter gets to 1.1 to fix build issues.
Original change's description:
> Have a GrBackendFormat be stored on gpu proxies.
>
> Bug: skia:
> Change-Id: Iaf1fb24ab29a61d44e5fa59a5e0867ed02dcda90
> Reviewed-on: https://skia-review.googlesource.com/c/168021
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Greg Daniel <egdaniel@google.com>
TBR=egdaniel@google.com,bsalomon@google.com,brianosman@google.com
Change-Id: I574fdc084ef5994596c51fb0d60423b5dc01b885
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:903701 chromium:903756
Reviewed-on: https://skia-review.googlesource.com/c/169835
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
This resolves many scoping issues, which complicate this code.
Change-Id: Ib0d283d95ff8a563176a333c8d388947650df4d2
Reviewed-on: https://skia-review.googlesource.com/c/169761
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Bug: skia:
Change-Id: Iaf1fb24ab29a61d44e5fa59a5e0867ed02dcda90
Reviewed-on: https://skia-review.googlesource.com/c/168021
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
This reverts commit 6bd19df9fa.
Restores original CL, but adds guards for flutter.
Bug: skia:
Change-Id: I380b4ea87d293355026d734249aa2b8c397da144
Reviewed-on: https://skia-review.googlesource.com/c/169345
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
Auto-Submit: Mike Reed <reed@google.com>
