This fixes every case where virtual and SK_OVERRIDE were on the same line,
which should be the bulk of cases. We'll have to manually clean up the rest
over time unless I level up in regexes.
for f in (find . -type f); perl -p -i -e 's/virtual (.*)SK_OVERRIDE/\1SK_OVERRIDE/g' $f; end
BUG=skia:
Review URL: https://codereview.chromium.org/806653007
Eliminates SkFlattenable{Read,Write}Buffer, promoting SkOrdered{Read,Write}Buffer
a step each in the hierarchy.
What used to be this:
SkFlattenableWriteBuffer -> SkOrderedWriteBuffer
SkFlattenableReadBuffer -> SkOrderedReadBuffer
SkFlattenableReadBuffer -> SkValidatingReadBuffer
is now
SkWriteBuffer
SkReadBuffer -> SkValidatingReadBuffer
Benefits:
- code is simpler, names are less wordy
- the generic SkFlattenableFooBuffer code in SkPaint was incorrect; removed
- write buffers are completely devirtualized, important for record speed
This refactoring was mostly mechanical. You aren't going to find anything
interesting in files with less than 10 lines changed.
BUG=skia:
R=reed@google.com, scroggo@google.com, djsollen@google.com, mtklein@google.com
Author: mtklein@chromium.org
Review URL: https://codereview.chromium.org/134163010
git-svn-id: http://skia.googlecode.com/svn/trunk@13245 2bbb7eff-a529-9590-31e7-b0007b416f81
There were only a few warnings left, so I fixed them and enabled the unused variable warning by removing the "-Wno-unused" flag. Only the -Wno-unused-parameter remains for now (could be removed later).
Review URL: https://codereview.chromium.org/12480002
git-svn-id: http://skia.googlecode.com/svn/trunk@8030 2bbb7eff-a529-9590-31e7-b0007b416f81
Move Line2DPathEffect (now Sk_) into a separate header file so it can
be shared and initialized.
Switch to the shared version in SampleAll and SampleSlides.
Remove the skip pipe flag from texteffects, since it can now be serialized.
I have a separate change to turn serialization on by default at https://codereview.appspot.com/6498121/
Review URL: https://codereview.appspot.com/6503106
git-svn-id: http://skia.googlecode.com/svn/trunk@5512 2bbb7eff-a529-9590-31e7-b0007b416f81
This CL is an effort to stage the conversion to named
parameters for all SkFlattenable commands. This particular
stage only does the following two things...
1. Move flattenable buffers from SkFlattenable.h into
their own header.
2. Update and Add new read write methods for better clarity
and convenience.
BUG=
Review URL: https://codereview.appspot.com/6448095
git-svn-id: http://skia.googlecode.com/svn/trunk@4980 2bbb7eff-a529-9590-31e7-b0007b416f81
semantics, allowing gcc and clang to check the format string against the
arguments. Enable its use on SkString (printf, appendf, and prependf). Also
define an SK_SIZE_T_SPECIFIER macro so there's a cross-platform way of
printing a size_t.
Review URL: http://codereview.appspot.com/6375043/
git-svn-id: http://skia.googlecode.com/svn/trunk@4485 2bbb7eff-a529-9590-31e7-b0007b416f81
Fix these class of warnings:
- unused functions
- unused locals
- sign mismatch
- missing function prototypes
- missing newline at end of file
- 64 to 32 bit truncation
The changes prefer to link in dead code in the debug build
with 'if (false)' than to comment it out, but trivial cases
are commented out or sometimes deleted if it appears to be
a copy/paste error.
Review URL: https://codereview.appspot.com/6301044
git-svn-id: http://skia.googlecode.com/svn/trunk@4183 2bbb7eff-a529-9590-31e7-b0007b416f81
or stroke parameters for a path.
Today, the patheffect only sees if the caller was going to stroke or fill, and
if stroke, it just sees the width. With this change, the effect can see all of the
related parameters (e.g. cap/join/miter). No other change is intended at this
time.
After this change, I hope to use this additional data to allow SkDashPathEffect
to, at times, apply the stroke as part of its effect, which may be much more
efficient than first dashing, and then reading that and stroking it.
Most of these files changed just because of the new parameter to filterPath. The
key changes are in SkPathEffect.[h,cpp], SkPaint.cpp and SkScalerContext.cpp
Review URL: https://codereview.appspot.com/6250051
git-svn-id: http://skia.googlecode.com/svn/trunk@4048 2bbb7eff-a529-9590-31e7-b0007b416f81
or stroke parameters for a path.
Today, the patheffect only sees if the caller was going to stroke or fill, and if
stroke, it just sees the width. With this change, the effect can see all of the
related parameters (e.g. cap/join/miter). No other change is intended at this
time.
After this change, I hope to use this additional data to allow SkDashPathEffect
to, at times, apply the stroke as part of its effect, which may be much more
efficient than first dashing, and then reading that and stroking it.
Most of these files changed just because of the new parameter to filterPath. The
key changes are in SkPathEffect.[h,cpp], SkPaint.cpp and SkScalerContext.cpp
Review URL: https://codereview.appspot.com/6249050
git-svn-id: http://skia.googlecode.com/svn/trunk@4046 2bbb7eff-a529-9590-31e7-b0007b416f81
The following changes were made by this CL:
1. Make flatten() a protected method as callers should use
SkFlattenableWriteBuffer to flatten an object
2. Make flatten a const method (including subclasses)
3. Mark subclass implementation of flatten with SK_OVERRIDE
4. Ensure overridden flatten impls call their parent
5. Remove no-op implementations of flatten from subclasses
Additionally, if necessary the unflattening constructor was
also moved to the protected section of the subclasses
header if it was not already there.
git-svn-id: http://skia.googlecode.com/svn/trunk@3540 2bbb7eff-a529-9590-31e7-b0007b416f81
I have manually examined all of these diffs and restored a few files that
seem to require manual adjustment.
The following files still need to be modified manually, in a separate CL:
android_sample/SampleApp/AndroidManifest.xml
android_sample/SampleApp/res/layout/layout.xml
android_sample/SampleApp/res/menu/sample.xml
android_sample/SampleApp/res/values/strings.xml
android_sample/SampleApp/src/com/skia/sampleapp/SampleApp.java
android_sample/SampleApp/src/com/skia/sampleapp/SampleView.java
experimental/CiCarbonSampleMain.c
experimental/CocoaDebugger/main.m
experimental/FileReaderApp/main.m
experimental/SimpleCocoaApp/main.m
experimental/iOSSampleApp/Shared/SkAlertPrompt.h
experimental/iOSSampleApp/Shared/SkAlertPrompt.m
experimental/iOSSampleApp/SkiOSSampleApp-Base.xcconfig
experimental/iOSSampleApp/SkiOSSampleApp-Debug.xcconfig
experimental/iOSSampleApp/SkiOSSampleApp-Release.xcconfig
gpu/src/android/GrGLDefaultInterface_android.cpp
gyp/common.gypi
gyp_skia
include/ports/SkHarfBuzzFont.h
include/views/SkOSWindow_wxwidgets.h
make.bat
make.py
src/opts/memset.arm.S
src/opts/memset16_neon.S
src/opts/memset32_neon.S
src/opts/opts_check_arm.cpp
src/ports/SkDebug_brew.cpp
src/ports/SkMemory_brew.cpp
src/ports/SkOSFile_brew.cpp
src/ports/SkXMLParser_empty.cpp
src/utils/ios/SkImageDecoder_iOS.mm
src/utils/ios/SkOSFile_iOS.mm
src/utils/ios/SkStream_NSData.mm
tests/FillPathTest.cpp
Review URL: http://codereview.appspot.com/4816058
git-svn-id: http://skia.googlecode.com/svn/trunk@1982 2bbb7eff-a529-9590-31e7-b0007b416f81
-Wall -Wextra and -Wno-unused in common.gypi. This revealed a lot of warnings
(and some actual bugs), all of which I fixed here. This is pretty mindless
stuff for the most part (order of intialization, missing initializers, && within
||, etc), but will allow us to build cleanly with -Wall and -Wextra (and
-Werror, if we so choose).
I put defaults into switches that were missing cases. I could put in the actual
missing enums instead if that's desired. I could also assert on missing enums
instead of break, if that's desired. I wasn't sure how to test the stuff in
"animator", so that should be looked at a bit more closely.
Review URL: http://codereview.appspot.com/4547055/
git-svn-id: http://skia.googlecode.com/svn/trunk@1386 2bbb7eff-a529-9590-31e7-b0007b416f81
