We already look at the alpha type.
We can look at the color type too.
This doesn't likely matter very often, as we usually have
kOpaque_SkAlphaType for opaque SkColorTypes, but might as
well toss this in there for completeness.
Change-Id: Ie164acc9294dee115d8e0637e3186a301ebe58f0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/278479
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Updated every switch that yelled at me, and added support to dm and fm,
and then founds some more switches that shouldn't have defaults...
The tricky spots outside those were mips and dither,
since they aren't simply exhaustive switches.
_Now_ no diffs between RGB/BGR 1010102 and 101010x.
No GPU support.
Bug: skia:9893
Change-Id: I73ab3fd22bdef0519296dfe4cb84031e23ca0be3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/270114
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
These docs repeat the possible values for these enums at
the time they were written ad nauseum. They're not kept
up to date.
This is the result of searching for "one of" and deleting most.
I did keep one set of docs where some enum values were permitted
on some platforms and others on others. And I kept docs for args
that didn't take enums but only accepted a particular range, like
[0,8] for matrix value indices or 0-4 for pixel size shifts.
Change-Id: Ib21ec54ebbc4abe456e9b3f436f3823d7da9097d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/270107
Auto-Submit: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Reed <reed@google.com>
SkSurface will already reject a rowBytes that does not align on a pixel
boundary. Push that check into SkImageInfo. This will make SkBitmap,
SkPixmap, SkMallocPixelRef, and SkImage_Raster, which already call
validRowBytes, make the same check. If an SkSurface cannot use a
non-pixel-aligned rowBytes, then an SkCanvas wrapping an SkBitmap should
not either.
Update MallocPixelRefTest to use a rowBytes that is still valid.
Change-Id: I848d94dbeab8b58b92877104dd67ea23a9d19ca8
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/265599
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Herb Derby <herb@google.com>
The matrices we're using can produce very slightly out of range color
channels. This gives surprising results when in shader blending is used
for color burn and color dodge. After this change we clamp the RGB
values to 0..1 before applying premul.
Adds a GM modeled on a blink layout test that shows the problem using
SkImageMakeFromYUVAPixmaps.
Bug: skia:9619
Change-Id: I446d39763a7f5a2f7c5f61d94d163927d851baa3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/253879
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Change-Id: I8ef13b78a5f2f49ff9c59db285b3e0e7ee708c9b
Bug: chromium:960620
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/252160
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This is a reland of 6fc04f88a8
Original change's description:
> Reland "SkSurface asynchronous read APIs allow client to extend pixel lifetime"
>
> This is a reland of ce240cc6fd
>
> Original change's description:
> > SkSurface asynchronous read APIs allow client to extend pixel lifetime
> >
> > Previously the pixel data passed to the client was only valid during
> > the client's callback. This meant if the client wanted to defer
> > processing of the data a copy was necessary.
> >
> > Now we pass an object to the callback and the pixel lifetime is tied
> > to the lifetime of that object.
> >
> > The object may be holding a GPU transfer buffer mapped. We don't assume
> > that the object will be released on the direct GrContext thread. So
> > when the object is destroyed it posts a message to a new type,
> > GrClientMappedBufferManager, hanging off the direct context. The direct
> > context will periodically check for messages and unmap and then unref
> > buffers so that they can be reused. Currently this is done in
> > GrContext::performDeferredCleanup() and GrDrawingManager::flush().
> >
> > The old API is kept around for backwards compatibility but it is
> > reimplemented as a bridge on top of the new mechanism.
> >
> > Also a utility function to SkImageInfo is added to directly make a new
> > info with a specified dimensions rather than passing the width and
> > height separately to makeWH().
> >
> > Bug: chromium:973403
> > Bug: skia:8962
> >
> > Change-Id: Id5cf04235376170142a48e90d3ecd13fd021a2a6
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245457
> > Reviewed-by: Brian Osman <brianosman@google.com>
> > Commit-Queue: Brian Salomon <bsalomon@google.com>
>
> Bug: chromium:973403, skia:8962
> Change-Id: I5cecd36276c8b6dc942cf549c7095db2df88530c
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245678
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
Bug: chromium:973403, skia:8962
Change-Id: Ie584c1c3ef8021c976f71b708e53871c693cc450
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/246057
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit 6fc04f88a8.
Reason for revert: Chrome roll failure suspect because of:
* https://chromium-review.googlesource.com/c/chromium/src/+/1837131 (22 commits)
* https://chromium-review.googlesource.com/c/chromium/src/+/1837214 (24 commits)
Original change's description:
> Reland "SkSurface asynchronous read APIs allow client to extend pixel lifetime"
>
> This is a reland of ce240cc6fd
>
> Original change's description:
> > SkSurface asynchronous read APIs allow client to extend pixel lifetime
> >
> > Previously the pixel data passed to the client was only valid during
> > the client's callback. This meant if the client wanted to defer
> > processing of the data a copy was necessary.
> >
> > Now we pass an object to the callback and the pixel lifetime is tied
> > to the lifetime of that object.
> >
> > The object may be holding a GPU transfer buffer mapped. We don't assume
> > that the object will be released on the direct GrContext thread. So
> > when the object is destroyed it posts a message to a new type,
> > GrClientMappedBufferManager, hanging off the direct context. The direct
> > context will periodically check for messages and unmap and then unref
> > buffers so that they can be reused. Currently this is done in
> > GrContext::performDeferredCleanup() and GrDrawingManager::flush().
> >
> > The old API is kept around for backwards compatibility but it is
> > reimplemented as a bridge on top of the new mechanism.
> >
> > Also a utility function to SkImageInfo is added to directly make a new
> > info with a specified dimensions rather than passing the width and
> > height separately to makeWH().
> >
> > Bug: chromium:973403
> > Bug: skia:8962
> >
> > Change-Id: Id5cf04235376170142a48e90d3ecd13fd021a2a6
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245457
> > Reviewed-by: Brian Osman <brianosman@google.com>
> > Commit-Queue: Brian Salomon <bsalomon@google.com>
>
> Bug: chromium:973403, skia:8962
> Change-Id: I5cecd36276c8b6dc942cf549c7095db2df88530c
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245678
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com,brianosman@google.com
Change-Id: I9e01d1b82fb399b94292441d91da51176bb161d9
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:973403, skia:8962
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245956
Reviewed-by: Ravi Mistry <rmistry@google.com>
Commit-Queue: Ravi Mistry <rmistry@google.com>
This is a reland of ce240cc6fd
Original change's description:
> SkSurface asynchronous read APIs allow client to extend pixel lifetime
>
> Previously the pixel data passed to the client was only valid during
> the client's callback. This meant if the client wanted to defer
> processing of the data a copy was necessary.
>
> Now we pass an object to the callback and the pixel lifetime is tied
> to the lifetime of that object.
>
> The object may be holding a GPU transfer buffer mapped. We don't assume
> that the object will be released on the direct GrContext thread. So
> when the object is destroyed it posts a message to a new type,
> GrClientMappedBufferManager, hanging off the direct context. The direct
> context will periodically check for messages and unmap and then unref
> buffers so that they can be reused. Currently this is done in
> GrContext::performDeferredCleanup() and GrDrawingManager::flush().
>
> The old API is kept around for backwards compatibility but it is
> reimplemented as a bridge on top of the new mechanism.
>
> Also a utility function to SkImageInfo is added to directly make a new
> info with a specified dimensions rather than passing the width and
> height separately to makeWH().
>
> Bug: chromium:973403
> Bug: skia:8962
>
> Change-Id: Id5cf04235376170142a48e90d3ecd13fd021a2a6
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245457
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
Bug: chromium:973403, skia:8962
Change-Id: I5cecd36276c8b6dc942cf549c7095db2df88530c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245678
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit ce240cc6fd.
Reason for revert: crashing in chrome unit test, abandoned context related?
Original change's description:
> SkSurface asynchronous read APIs allow client to extend pixel lifetime
>
> Previously the pixel data passed to the client was only valid during
> the client's callback. This meant if the client wanted to defer
> processing of the data a copy was necessary.
>
> Now we pass an object to the callback and the pixel lifetime is tied
> to the lifetime of that object.
>
> The object may be holding a GPU transfer buffer mapped. We don't assume
> that the object will be released on the direct GrContext thread. So
> when the object is destroyed it posts a message to a new type,
> GrClientMappedBufferManager, hanging off the direct context. The direct
> context will periodically check for messages and unmap and then unref
> buffers so that they can be reused. Currently this is done in
> GrContext::performDeferredCleanup() and GrDrawingManager::flush().
>
> The old API is kept around for backwards compatibility but it is
> reimplemented as a bridge on top of the new mechanism.
>
> Also a utility function to SkImageInfo is added to directly make a new
> info with a specified dimensions rather than passing the width and
> height separately to makeWH().
>
> Bug: chromium:973403
> Bug: skia:8962
>
> Change-Id: Id5cf04235376170142a48e90d3ecd13fd021a2a6
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245457
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com,brianosman@google.com
Change-Id: Ic14cf07a7629b167c9f34a651aa87a0326e74207
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:973403, skia:8962
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245721
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Previously the pixel data passed to the client was only valid during
the client's callback. This meant if the client wanted to defer
processing of the data a copy was necessary.
Now we pass an object to the callback and the pixel lifetime is tied
to the lifetime of that object.
The object may be holding a GPU transfer buffer mapped. We don't assume
that the object will be released on the direct GrContext thread. So
when the object is destroyed it posts a message to a new type,
GrClientMappedBufferManager, hanging off the direct context. The direct
context will periodically check for messages and unmap and then unref
buffers so that they can be reused. Currently this is done in
GrContext::performDeferredCleanup() and GrDrawingManager::flush().
The old API is kept around for backwards compatibility but it is
reimplemented as a bridge on top of the new mechanism.
Also a utility function to SkImageInfo is added to directly make a new
info with a specified dimensions rather than passing the width and
height separately to makeWH().
Bug: chromium:973403
Bug: skia:8962
Change-Id: Id5cf04235376170142a48e90d3ecd13fd021a2a6
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245457
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Change-Id: Idea9530028428c1a9d42e08a655457938b284b84
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245261
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Add version SkImageInfo::Make() that takes SkISize instead of separate
width and height.
Change-Id: I42aa79d23b19e22f5405631728c245b04bce0559
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245172
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Everything except for SkImageInfo.h is mechanical
Change-Id: I2d775c79467fb15f6022e80d21b4a9151272fe2a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/242896
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This CL adds:
kAlpha_F16_SkColorType
kRG_F16_SkColorType
kRGBA_16161616_SkColorType,
which should be it for a while.
Bug: skia:9121
Change-Id: I81b9d46a202a76e9b7d7ca86495d72dbdae32576
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/241357
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Mike Reed <reed@google.com>
This also switches GrColorType::kR_16 to kAlpha_16 to more closely match raster.
Bug: skia:9121
Change-Id: I03c6e6c52c90aa4223478c5ea6c8b2ed8558f677
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/239930
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Current strategy: everything from the top
Things to look at first are the manual changes:
- added tools/rewrite_includes.py
- removed -Idirectives from BUILD.gn
- various compile.sh simplifications
- tweak tools/embed_resources.py
- update gn/find_headers.py to write paths from the top
- update gn/gn_to_bp.py SkUserConfig.h layout
so that #include "include/config/SkUserConfig.h" always
gets the header we want.
No-Presubmit: true
Change-Id: I73a4b181654e0e38d229bc456c0d0854bae3363e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/209706
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Hal Canary <halcanary@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
We're moving in a different direction for Skia documentation. We no
longer run bookmaker on the bots, and things have already degraded such
that it can't be run. This leaves the generated markdown in place for
the last set of docs that were generated (which are still useful until
the Doxygen docs catch up).
See also: https://skia-review.googlesource.com/c/skia/+/198162
Docs-Preview: https://skia.org/?cl=203464
Bug: skia:
Change-Id: I2f967a9c17dbc1cc899947d365071ef69cfb8ad7
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/203464
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This utility color space just maps Y to R, U to G and V to B when flattening or accessing the YUV planes. Clients can then add a colorFilter to directly manipulate the YUV values.
This cannot land in Skia until the following CL lands in Chrome:
https://chromium-review.googlesource.com/c/chromium/src/+/1506004 (Update usage of Skia's SkYUVColorSpace enum to allow the addition of a new value)
Change-Id: Id9403ebbd009b45281d4d53fca52f68692d6c69f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/198160
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
For now this is distinct from kRGBA_F16_SkColorType but treated the
same. Next steps are to see if we can keep it clamped to [0,1].
Switched a few switches away from default to exhaustive.
Took away any explicit SW clamps for now except the one we definitely
want in append_gamut_clamp_if_normalized().
Skip F16Norm in the DDL test because we can't yet distinguish it from
F16.
Change-Id: I021a864fe078e4fa4e2b399982e6c38350e10d74
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/196371
Commit-Queue: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Auto-Submit: Mike Klein <mtklein@google.com>
In preparation for upcoming changes to bookmaker
which validate more include contents, revise
generated files in include/core to fix various
errors.
Fixes include:
- references in comments to other Skia interface elements
- @param names agree with function declarations
- spelling typos
- generic references (e.g. 'x' in place of 'x-axis')
- lines longer than 100 columns
The fix to SkPath::rCubicTo triggered a parallel
fix to SkPath_Reference.bmh; other wed documentation
fixes will be in an upcoming CL.
TBR=reed@google.com
Docs-Preview: https://skia.org/?cl=166680
Bug: skia:
Change-Id: If734696dc64655f1cf40b121a180210c932b1d89
Reviewed-on: https://skia-review.googlesource.com/c/166680
Commit-Queue: Cary Clark <caryclark@skia.org>
Auto-Submit: Cary Clark <caryclark@skia.org>
Reviewed-by: Cary Clark <caryclark@skia.org>
the newest ones (SkBlendMode.h, SkPicture.h, SkRRect.h)
need additional editing; enough has changed that it is
time to refresh anyway.
TBR=reed@google.com
Docs-Preview: https://skia.org/?cl=141043
Bug: skia:6818
Change-Id: Ic123b02f57005a087f8655cafa1a2537529beca5
Reviewed-on: https://skia-review.googlesource.com/141043
Commit-Queue: Cary Clark <caryclark@skia.org>
Reviewed-by: Cary Clark <caryclark@skia.org>
Draws basically the same as f16.
The existing load_f32, load_f32_dst, and store_f32 stages all had the
same bug that we'd never noticed because dy was always 0 until now.
Change-Id: Ibbd393fa1acc5df414be4cdef0f5a9d11dcccdb3
Reviewed-on: https://skia-review.googlesource.com/137585
Commit-Queue: Mike Klein <mtklein@chromium.org>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Found some bookmaker bugs that were suppressing
spelling errors and syntax errors.
TBR=reed@google.com
Bug: skia:6898
Change-Id: Ie7331dd03723d987cb2df46018a984f42d0ee518
Reviewed-on: https://skia-review.googlesource.com/134942
Reviewed-by: Cary Clark <caryclark@skia.org>
Commit-Queue: Cary Clark <caryclark@skia.org>
Auto-Submit: Cary Clark <caryclark@skia.org>
Change-Id: I8d5c07222bd1cd1bea4fc0060d07a29786f8e254
Reviewed-on: https://skia-review.googlesource.com/134784
Commit-Queue: Hal Canary <halcanary@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Auto-Submit: Hal Canary <halcanary@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
sed 's/SK_MaxSizeT/SIZE_MAX/g'
sed 's/SK_MaxU32/UINT32_MAX/g'
sed 's/SK_MaxU16/UINT16_MAX/g'
SK_MinU32 and SK_MinU16 were unused
Change-Id: I6b6c824df47b05bde7e73b13a58e851a5f63fe0e
Reviewed-on: https://skia-review.googlesource.com/134607
Commit-Queue: Hal Canary <halcanary@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
This reverts commit 2a2f675926.
Reason for revert: this appears to be what is holding up the Chrome roll.
Original change's description:
> SkTypes: extract SkTo
>
> Change-Id: I8de790d5013db2105ad885fa2683303d7c250b09
> Reviewed-on: https://skia-review.googlesource.com/133620
> Reviewed-by: Mike Klein <mtklein@google.com>
TBR=mtklein@google.com,halcanary@google.com
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Change-Id: Iafd738aedfb679a23c061a51afe4b98a8d4cdfae
Reviewed-on: https://skia-review.googlesource.com/134504
Reviewed-by: Hal Canary <halcanary@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
SkColor.h generated include.
Also add generated comment for all files.
And, added typedef documentation where missing.
TBR=reed@google.com
Bug: skia:6898
Change-Id: Ib7757d70c1926b5ae04a5de557711756fce631b6
Reviewed-on: https://skia-review.googlesource.com/132827
Auto-Submit: Cary Clark <caryclark@skia.org>
Commit-Queue: Cary Clark <caryclark@skia.org>
Reviewed-by: Cary Clark <caryclark@skia.org>
Update the includes to match the bookmaker docs.
All edits are generated; if something looks amiss, I
probably introduced a bug in the generator. Please
let me know.
I was careful to pick up all direct edits to the includes
and add them to their bookmaker counterpart. Please take
a look to see if your favorites are there.
Note that enum and struct members have been shortened
to fit on one line. The intent is to provide more verbose
documentation online. Let me know if this is too terse.
TBR=reed@google.com
Bug: skia:6898
Change-Id: I374673ed884e03e142439d91532efc558deeaccd
Reviewed-on: https://skia-review.googlesource.com/130540
Commit-Queue: Cary Clark <caryclark@skia.org>
Auto-Submit: Cary Clark <caryclark@skia.org>
Reviewed-by: Cary Clark <caryclark@google.com>
Reviewed-by: Cary Clark <caryclark@skia.org>
The plan foward is to have a new API on SkImage to make from YUVA
textures which a combination of array of textures and array of
SkYUVAIndex struct indicating which texture and channel to read for
each plane. This is a pre-step to let the old API use these ideas.
Bug: skia: 7903
Change-Id: I6a696db31a574247eb2abff60f2186a74b640142
Reviewed-on: https://skia-review.googlesource.com/128601
Commit-Queue: Weiliang Chen <weiliangc@chromium.org>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
This is an API change. I assume that only Skia uses these routines.
Change-Id: Iefc98fa5c0b83eb4f52c478e345fd99121ecb254
Reviewed-on: https://skia-review.googlesource.com/129440
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
The presence of global functions threw off the
indentation of themselves and everything following.
TBR=reed@google.com
Bug: skia:6898
Change-Id: I3c6c21b62922f42157085fa7aaa19deb9560f16d
Reviewed-on: https://skia-review.googlesource.com/118380
Reviewed-by: Cary Clark <caryclark@skia.org>
Commit-Queue: Cary Clark <caryclark@skia.org>
SkImageInfo.h is generated for the first time.
Minor corrections in the other includes.
TBR=reed@google.com
Bug: skia:6898
Change-Id: I9a16753e234ace3bfbcc5b58381347fd0e63b1c8
Reviewed-on: https://skia-review.googlesource.com/118168
Commit-Queue: Cary Clark <caryclark@skia.org>
Reviewed-by: Cary Clark <caryclark@skia.org>
If SkImageInfo flatten and unflatten aren't referenced outside
of one test, perhaps they can be removed altogether.
R=reed@google.com
Bug: skia:6898
Change-Id: Ia6f82b66d4496a628ad95c386d1865793f3e31a9
Reviewed-on: https://skia-review.googlesource.com/115074
Commit-Queue: Cary Clark <caryclark@skia.org>
Reviewed-by: Mike Reed <reed@google.com>
Now that surface creation is more picky about its imageinfo, we need to
allow clients to know when they should clean-up their alphatype (like
our own gm)
Bug: skia:
Change-Id: Ic110c75769e0154a8343d7e2160d3351f02cf48f
Reviewed-on: https://skia-review.googlesource.com/106320
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Bug: skia:
Change-Id: I8c91cfdb89e4f22448d1201d391556fe43d86dca
Reviewed-on: https://skia-review.googlesource.com/105289
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Reviewed-by: Cary Clark <caryclark@google.com>
BUG= skia:7533
Change-Id: I4b3f6b827fd833ba2d07895884d2abc9a3132366
Reviewed-on: https://skia-review.googlesource.com/99781
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Brian Salomon <bsalomon@google.com>
teeny fixes to SkImageInfo.h to get
ready for documenting it. Selected
SkImageInfo.h as Herb discovered that
global enums (especially forward
declared ones) break bookmaker.
TBR=reed@google.com
Bug: skia:6898
Change-Id: I6ecf4f9dd7022c810f3d7a6cfee10fb07aa49aee
Reviewed-on: https://skia-review.googlesource.com/99342
Reviewed-by: Cary Clark <caryclark@skia.org>
Reviewed-by: Cary Clark <caryclark@google.com>
Commit-Queue: Cary Clark <caryclark@skia.org>
no client still defines this
Bug: skia:
Change-Id: If55dade4207108241bbb1e3d6f7515ad12d36acc
Reviewed-on: https://skia-review.googlesource.com/59083
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
