Change-Id: Ie1eac40fe678529410f3ae4ab0cc7460dedfa4c2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/408296
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Herb Derby <herb@google.com>
There were two issues leading to the corruption seen in the linked
chromium issue.
1. The draw's bounds were calculated based on the quad being clipped
to w>= epsilon, which is what happens when the AA inset/outset is done.
But for non-aa quads, the fillrect and texture ops did no clipping,
assuming that the GPU would be sufficient. However, this can produce
non-aa draws that exceed the calculated bounds, misleading the clip
stack into incorrectly removing the scissor, etc.
2. Precision issues within CropToRect meant some perspective quads'
barycentric coordinates would become degenerate and compute to (0,0,1),
making it appear as if the render target/scissor were contained within
it. This meant we'd turn it into a rectangular clear.
These changes appear to address the corruption on Linux and Windows, but
there are still rendering artifacts from poor aa inset/outset
calculations. These artifacts are at least limited to the clip properly.
A better rendering method that does not rely on line intersections
will address these artifacts, but this CL is a reasonable temporary
mitigation.
Bug: chromium:1204347
Change-Id: I3c67d4efe70313ae7c98abc0a57b5b047c83890d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407821
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
This CL adds a polyfill for componentwise matrix/matrix division to
Metal, as well as matrix/=matrix. Matrix/scalar and scalar/matrix
division work by splatting the scalar out to a matrix (handled in the
prior CL, http://review.skia.org/407616) and then performing
componentwise matrix/matrix division.
Working demonstration (copy-pasted from the Metal output file):
http://screen/BrqyPcbPrB7Dy4m
Change-Id: I6a8b97783be3485f7ffee551b669d14bc58e7568
Bug: skia:11125
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407796
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
We don't need to do string manipulation to turn `+=` into `+`. We can
make the same conversion via `op.removeAssignment()`.
Change-Id: I036ad314c161af45624efecde944bb0e596c1abd
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407816
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
GrCullTest quickly determines whether a set of points will be visible
or not. It will be used to guard against exponential recursion when
chopping paths at an extreme zoom level.
Bug: skia:10419
Change-Id: I85183826d820bbca0349a1e794b0696f776b134b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407297
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Successful dm runs on Windows currently include this message many
thousands of times over. This pollutes the logs for no benefit.
Change-Id: I127b4588ed25d8f51ac70d0f87645bd9c28cec5a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/408057
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Julia Lavrova <jlavrova@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This reverts commit 90508f02dc.
Reason for revert: avoiding driver bugs this time
Original change's description:
> Revert "The Matrices test now verifies its results."
>
> This reverts commit 86121f6c0e.
>
> Reason for revert: tree sad
>
> Original change's description:
> > The Matrices test now verifies its results.
> >
> > Previously, this test did a bunch of matrix math but never actually
> > checked its results for correctness.
> >
> > Change-Id: I353be58049286266c2d561b0939b3874d2684403
> > Bug: skia:11985
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407360
> > Commit-Queue: John Stiles <johnstiles@google.com>
> > Commit-Queue: Brian Osman <brianosman@google.com>
> > Auto-Submit: John Stiles <johnstiles@google.com>
> > Reviewed-by: Brian Osman <brianosman@google.com>
>
> TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
>
> Change-Id: I1335f01c14ee955426e02efaa3c30421cd41aa34
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Bug: skia:11985
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407617
> Reviewed-by: John Stiles <johnstiles@google.com>
> Commit-Queue: John Stiles <johnstiles@google.com>
Bug: skia:11985
Change-Id: I214375d74977f324973da72c440d7ff5ff179016
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/408157
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
The Metal code generator will now detect matrix-op-scalar expressions
and splat the scalar across a matrix. This allows a scalar to be added
to, or subtracted from, a matrix. (It does not fix division because
Metal also does not natively support componentwise division on
matrices.)
Change-Id: I7d5b0c5bd35393475c524e34cad789bf4f72a103
Bug: skia:11125
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407616
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This moves ownership of the SkSurface to ThreadedSurface::fWindowSurface.
When we pass a Message to the SurfaceThread, we will include a pointer to ThreadedSurface.fWindowSurface so we can call:
getCanvas() to draw the SkPicture
WindowSurface's constructor so it can hold the WindowContext made during the init
To reference WindowSurface in SurfaceThread, we need to make a header for Surface.cpp (added in this cl)
Change-Id: I8c67223eee301a1b6e0d05934e1f8597cf70bc64
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/404918
Commit-Queue: Jorge Betancourt <jmbetancourt@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
This is a reland of 84f70136ab
Original change's description:
> Use conics with w=Inf to describe triangles for the tessellator
>
> Previously, only the indirect tessellator could draw triangles, and
> only with special index data. Using conics with w=Inf will allow us to
> draw triangles with the hardware tessellator as well, in addition to
> being able to wean the indirect tessellator off an index buffer.
>
> Bug: skia:10419
> Bug: chromium:1202607
> Change-Id: I180af9cb5410c0e0bb25a2edcfb01e17d4a2f590
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/406977
> Commit-Queue: Chris Dalton <csmartdalton@google.com>
> Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Bug: skia:10419
Bug: chromium:1202607
Change-Id: Ic12b10eaa60fddd212c66757bf7100749ee58d49
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/408096
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
25b53ceb65..9809122dbd
2021-05-13 angle-autoroll@skia-public.iam.gserviceaccount.com Roll SwiftShader from be169ef35238 to c4d054c6ad41 (2 revisions)
If this roll has caused a breakage, revert this CL and stop the roller
using the controls here:
https://autoroll.skia.org/r/angle-skia-autoroll
Please CC robertphillips@google.com on the revert to ensure that a human
is aware of the problem.
To report a problem with the AutoRoller itself, please file a bug:
https://bugs.chromium.org/p/skia/issues/entry?template=Autoroller+Bug
Documentation for the AutoRoller is here:
https://skia.googlesource.com/buildbot/+doc/master/autoroll/README.md
Cq-Include-Trybots: skia/skia.primary:Build-Debian10-Clang-x86_64-Release-ANGLE;skia/skia.primary:Test-Win10-Clang-AlphaR2-GPU-RadeonR9M470X-x86_64-Debug-All-ANGLE;skia/skia.primary:Test-Win10-Clang-Golo-GPU-QuadroP400-x86_64-Debug-All-ANGLE;skia/skia.primary:Test-Win10-Clang-NUC5i7RYH-GPU-IntelIris6100-x86_64-Debug-All-ANGLE;skia/skia.primary:Test-Win10-Clang-NUC6i5SYK-GPU-IntelIris540-x86_64-Debug-All-ANGLE;skia/skia.primary:Test-Win10-Clang-NUC8i5BEK-GPU-IntelIris655-x86_64-Debug-All-ANGLE;skia/skia.primary:Test-Win10-Clang-NUCD34010WYKH-GPU-IntelHD4400-x86_64-Debug-All-ANGLE
Tbr: robertphillips@google.com
Change-Id: I316a4489d47a794409bfa8e765a486ee362f98bb
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/408077
Reviewed-by: skia-autoroll <skia-autoroll@skia-public.iam.gserviceaccount.com>
Commit-Queue: skia-autoroll <skia-autoroll@skia-public.iam.gserviceaccount.com>
Both SkColorData.h and SkNx_sse.h are in include/private, but not
(currently) included by any public headers. Adding them to a public
header reveals warnings about implicit conversion changing signedness
(-Wsign-conversion), enforced in our public headers warnings check.
Bug: skia:11995
Change-Id: Iee44b24a6df031431113e2d25e42f0a8dd55a5c0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/408056
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Tested that this works ok on GL backend of ANGLE.
Change-Id: I517523e03d49b3bc85abdda31ee427d708db0c7b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407817
Auto-Submit: Brian Salomon <bsalomon@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
This reverts commit 84f70136ab.
Reason for revert: Checking if this is blocking the Chrome roll
Original change's description:
> Use conics with w=Inf to describe triangles for the tessellator
>
> Previously, only the indirect tessellator could draw triangles, and
> only with special index data. Using conics with w=Inf will allow us to
> draw triangles with the hardware tessellator as well, in addition to
> being able to wean the indirect tessellator off an index buffer.
>
> Bug: skia:10419
> Bug: chromium:1202607
> Change-Id: I180af9cb5410c0e0bb25a2edcfb01e17d4a2f590
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/406977
> Commit-Queue: Chris Dalton <csmartdalton@google.com>
> Reviewed-by: Michael Ludwig <michaelludwig@google.com>
TBR=csmartdalton@google.com,michaelludwig@google.com
Change-Id: If2e460ff630103405c628da0c3273896ef89e4b5
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:10419
Bug: chromium:1202607
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/408018
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This reverts commit 0d0b1b3b56.
Reason for revert: Blocking revert of "Use conics with w=Inf to describe triangles for the tessellator"
Original change's description:
> Delete the index buffer from middle-out tessellation
>
> This gives us more flexibility for customizing triangulations in
> future modes. It is also hopefully cheaper than the extra memory
> indirection from indexed draws.
>
> Bug: skia:10419
> Bug: chromium:1202607
> Change-Id: Iba41a35a634edf8f962c3d604c7e035e7a85801d
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407296
> Commit-Queue: Chris Dalton <csmartdalton@google.com>
> Reviewed-by: Greg Daniel <egdaniel@google.com>
TBR=egdaniel@google.com,csmartdalton@google.com
Change-Id: I2ee198c7b68683e0f14c5ce2a29dd74ac0032028
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:10419
Bug: chromium:1202607
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/408017
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This gives us more flexibility for customizing triangulations in
future modes. It is also hopefully cheaper than the extra memory
indirection from indexed draws.
Bug: skia:10419
Bug: chromium:1202607
Change-Id: Iba41a35a634edf8f962c3d604c7e035e7a85801d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407296
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Previously, only the indirect tessellator could draw triangles, and
only with special index data. Using conics with w=Inf will allow us to
draw triangles with the hardware tessellator as well, in addition to
being able to wean the indirect tessellator off an index buffer.
Bug: skia:10419
Bug: chromium:1202607
Change-Id: I180af9cb5410c0e0bb25a2edcfb01e17d4a2f590
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/406977
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
This reverts commit bb006430ae.
Reason for revert: https://crbug.com/1208437 in Chrome: multiple
breakage on Android devices.
Original change's description:
> When running on ANGLE GL backend use the underlying GL driver info
> to setup caps.
>
> Bug: 1203705
> Change-Id: Ia50dfc6aef44848d81c735dc98dafdc692e8da40
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/406117
> Reviewed-by: Greg Daniel <egdaniel@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: 1203705
Change-Id: Idb3183ddb8c2564005871c27d19feff6c4292d7f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407498
Reviewed-by: Robert Kroeger <rjkroege@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Auto-Submit: Robert Kroeger <rjkroege@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Also three fixes for drawing to offscreen layers in MSKPPlayer:
*Only play from last full redraw to next cmd
*Clear before full redraw
*Actually track current cmd in layer state.
Bug: skia:11900
Change-Id: I988afb61f96c8acb7e7554d65bfa6cd6020196c7
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407460
Reviewed-by: Nathaniel Nifong <nifong@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
between SkBaseDevice/SkClipStackDevice and SkGpuDevice/SkGpuDevice_nga
The idea is that SkCanvas will deal with SkBaseGpuDevices rather than SkGpuDevice*s
Change-Id: I1bffeccab44d2a2b73413f50d7c905fa2df8eedc
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407459
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
- most of the small diffs are because I moved GrWangsFormula.h out
of the tessellate/ directory and into the geometry/ directory since
it's more general than HW tessellation.
The previous implementation was based on the heuristic that the distance
from the true curve to the line segment would be divided by 4 every time
the curve was recursively subdivided. This was a reasonable
approximation if the curve had balanced curvature on both sides of the
split. However, in the case of the new GM's curve, the left half was
already very linear and the right half had much higher curves.
This lead to the approximation reporting fewer points than required.
Theoretically, those few points that weren't utilized by the left half
of the curve could have been made available to the right half, but the
implementation of that would be tricky.
Instead, it now uses Wang's formula to compute the number of points.
Since recursive subdivision leads to linearly spaced samples assuming it
can't stop early, this point count represents a valid upper bound on
what's needed. It also then ensures both left and right halves of a
curve have the point counts they might need w/o updating the
generation implementations. However, since the recursive point
generation exits once each section has reached the error tolerance, in
scenarios where the prior approximation was reasonable, we'll end up
using fewer points than reported by Wang's. Hopefully that means there
is negligible performance regression since we won't be increasing
vertex counts by that much (except where needed for correctness).
Bug: skia:11886
Change-Id: Iba39dbe4de82011775524583efd461b10c9259fe
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/405197
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
This reverts commit 86121f6c0e.
Reason for revert: tree sad
Original change's description:
> The Matrices test now verifies its results.
>
> Previously, this test did a bunch of matrix math but never actually
> checked its results for correctness.
>
> Change-Id: I353be58049286266c2d561b0939b3874d2684403
> Bug: skia:11985
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407360
> Commit-Queue: John Stiles <johnstiles@google.com>
> Commit-Queue: Brian Osman <brianosman@google.com>
> Auto-Submit: John Stiles <johnstiles@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Change-Id: I1335f01c14ee955426e02efaa3c30421cd41aa34
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:11985
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407617
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
The docs team is producing thumbnails for pages using 20
threads. About 0.1% of their machines are showing massive
slowdown and contention. When looking at /profilez most of the
threads are waiting in spin locks to find a strike. This is
keeping the server from doing work on other pages that can make
progress. Move from SkSpinlock to SkMutex to allow other threads
to make progress.
Bug: b/182395513
Change-Id: I96448d784198041390e62bc5507ab0081d8f71b4
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407097
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Bug is fixed in angle
Bug: angleproject:4536
Change-Id: I79e6560ea5afc330e98bb2a7e1be7b4e366a1f51
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407016
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Previously, this test did a bunch of matrix math but never actually
checked its results for correctness.
Change-Id: I353be58049286266c2d561b0939b3874d2684403
Bug: skia:11985
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407360
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This is a reland of 0a0f4f5c35
This change makes SkCanvas::quickReject always reject empty draw bounds,
whereas previously scale+translate CTMs allowed bounds with w or h == 0
but otherwise contained in the clip to be drawn. This uncovered some
bugs in Skia where bounds shouldn't be empty, and in Flutter where
bounds were legit empty but not expected by the test.
No code changes needed. The issues that required its revert have been
fixed with:
1. https://github.com/flutter/engine/pull/26053 so that platforms that
use an empty typeface, leading to empty draws are just skipped.
2. https://skia-review.googlesource.com/c/skia/+/406140 so that path
effects update bounds so that Android's 1D dash path effect applied to
a horizontal line is properly not rejected.
Based on the period of time where the original CL was landed, some perf
data was collected.
- There were no significant changes in most SKPs or SVGs, except for a
Flutter page flip skp, which saw a 10% net improvement (perhaps the
flip is drawn with perspective?)
- A 10-20% regression in the motionmark paths skp, but dominated by the MSVC
compiler, so I'm not too concerned about that.
- Perspective microbenchmarks for drawing rectangles are 1.5-2x faster.
- quickReject microbenchmarks are about 2x slower.
The last two microbenchmark results aren't surprising since perspective
was the largest improvement in perf for SkM44::MapRect vs.
SkMatrix::mapRect, and the scale+translate specializations in Skmatrix
were maybe 50% faster than SkM44's. That would account for some of the
slow downs, and the rest could be explained by moving away from the
SIMD rect intersection and nan test.
Since these microreductions don't seem to bleed into more complex
benchmarks, I'm inclined to keep the code simple and not bring back the
custom intrinsics.
Original change's description:
> Simplify quickReject implementation in SkCanvas
>
> - SkCanvas no longer keeps fIsScaleTranslate bool that has to stay in
> sync with the type of the matrix.
> - No more fast or slow path for quickReject, the Sk4f code has been
> completely removed.
> - Uses SkM44::mapRect instead of SkMatrix::mapRect. This is slightly
> slower for S+T, but much faster for other transforms. I'm hopeful we
> won't notice the regression in the grand scheme for S+T, since the
> code is a lot simpler now.
> - The final isFinite() and intersects() check for quickReject uses
> SkRect's functions instead of hand-written SSE/NEON. If we think this
> is optimization is necessary, I'm hoping we can rewrite it in terms
> of skvx instead of specific instructions.
> - Consolidated how the quick-reject bounds outsetting into
> computeDeviceClipBounds, and added an option to skip outsetting for
> the one call site that doesn't want it.
>
> Bug: skia:10987
> Change-Id: I3cf2a73636cdeed06d12cab4548cfb94d1eb074a
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/405198
> Commit-Queue: Mike Reed <reed@google.com>
> Auto-Submit: Michael Ludwig <michaelludwig@google.com>
> Reviewed-by: Mike Reed <reed@google.com>
Bug: skia:10987
Change-Id: Id0d4b4ecebf0b83ae30f7e1a263961ab25de28dd
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407358
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Fixes CMake build
Cq-Include-Trybots: luci.skia.skia.primary:Build-Debian10-Clang-x86_64-Release-CMake
Change-Id: If4da32306e6735dced70412216e43f0b8bbca48c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407357
Commit-Queue: Brian Osman <brianosman@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Auto-Submit: Brian Osman <brianosman@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Change-Id: I674f038600afd6d49316c1ece515941ee5579068
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/406939
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit 34db2ddc92.
Reason for revert: guarding with a macro
Original change's description:
> Revert "Transform verts using nonsquare matrices when available."
>
> This reverts commit 048b5a2967.
>
> Reason for revert: Okay feeling confident this guess is right about who is breaking chrome roll.
>
> Original change's description:
> > Transform verts using nonsquare matrices when available.
> >
> > We were previously doing a square-matrix multiply then discarding one
> > third of the result; now, when available, we just get the result we need
> > via a non-square multiply.
> >
> > Change-Id: Ie13ae6f2c7f23e3a4c1f2c4eeb6361a97cdccf67
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/403079
> > Auto-Submit: John Stiles <johnstiles@google.com>
> > Commit-Queue: John Stiles <johnstiles@google.com>
> > Reviewed-by: Brian Salomon <bsalomon@google.com>
>
> TBR=bsalomon@google.com,brianosman@google.com,johnstiles@google.com
>
> Change-Id: I5e1026def7e7ade019c2543b6f30387bec1bc004
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/404596
> Reviewed-by: Greg Daniel <egdaniel@google.com>
> Commit-Queue: Greg Daniel <egdaniel@google.com>
Change-Id: I58e744cd1865602a098c4df4c6869fa7b60204ad
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407098
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
125f128e62..930db29463
2021-05-11 jmadill@chromium.org infra: Add Android swarming spec placeholder.
2021-05-11 lubosz.sarnecki@collabora.com FrameCapture: Don't capture shader functions on GLES1.
If this roll has caused a breakage, revert this CL and stop the roller
using the controls here:
https://autoroll.skia.org/r/angle-skia-autoroll
Please CC robertphillips@google.com on the revert to ensure that a human
is aware of the problem.
To report a problem with the AutoRoller itself, please file a bug:
https://bugs.chromium.org/p/skia/issues/entry?template=Autoroller+Bug
Documentation for the AutoRoller is here:
https://skia.googlesource.com/buildbot/+doc/master/autoroll/README.md
Cq-Include-Trybots: skia/skia.primary:Build-Debian10-Clang-x86_64-Release-ANGLE;skia/skia.primary:Test-Win10-Clang-AlphaR2-GPU-RadeonR9M470X-x86_64-Debug-All-ANGLE;skia/skia.primary:Test-Win10-Clang-Golo-GPU-QuadroP400-x86_64-Debug-All-ANGLE;skia/skia.primary:Test-Win10-Clang-NUC5i7RYH-GPU-IntelIris6100-x86_64-Debug-All-ANGLE;skia/skia.primary:Test-Win10-Clang-NUC6i5SYK-GPU-IntelIris540-x86_64-Debug-All-ANGLE;skia/skia.primary:Test-Win10-Clang-NUC8i5BEK-GPU-IntelIris655-x86_64-Debug-All-ANGLE;skia/skia.primary:Test-Win10-Clang-NUCD34010WYKH-GPU-IntelHD4400-x86_64-Debug-All-ANGLE
Tbr: robertphillips@google.com
Change-Id: Ie58a4061d7c6c2377570bf41057b7563d0276f89
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407125
Reviewed-by: skia-autoroll <skia-autoroll@skia-public.iam.gserviceaccount.com>
Commit-Queue: skia-autoroll <skia-autoroll@skia-public.iam.gserviceaccount.com>
Fixes G3 roll
Change-Id: I0d7c3c74f793fb2c22db969fb2a6f93e39931918
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407099
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: Brian Osman <brianosman@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
This reverts commit a3262aa1d2.
Reason for revert: I believe this is blocking the Flutter roll
Original change's description:
> Switching SkText to UTF16
>
> Required some changes in SkUnicode to support it
> SkShaper still works on UTF8
>
> Change-Id: I76645668e1d9bf95eb4539a066deea2b24ecf5e9
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/406360
> Reviewed-by: Julia Lavrova <jlavrova@google.com>
> Commit-Queue: Julia Lavrova <jlavrova@google.com>
TBR=bungeman@google.com,reed@google.com,jlavrova@google.com
Change-Id: I68b66dfbc4f3668a8fb765d5f557699e396cd3f5
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407177
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This reverts commit 71430593f0.
Reason for revert: Clang-tidy bot unhappy. (Not sure how this slipped by).
Original change's description:
> Added DSL flags
>
> This adds some basic flags to the DSL initialization which allows us to
> toggle things like optimization and validation.
>
> Change-Id: I35b10526af1678c88901eaacd5a2c4a9f5cd21a7
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/406896
> Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
> Reviewed-by: John Stiles <johnstiles@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Change-Id: I7512b8bcc6e94707949904eec42c396faa7fdaf8
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407176
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
