At draw time, this filter simply concatenates the given matrix to the
CTM, and recurses on its input. The matrix is thus applied to any
upstream filter parameters and crop rects.
BUG=skia:
Review URL: https://codereview.chromium.org/1392833005
Fix a crash in dm when run with Chromium command buffer driver.
Also removes glCopyTextureCHROMIUM, it does not seem to be used.
This is removed on the grounds that it would need similar change,
if it was used. The variable fCopyTextureCHROMIUM does not seem to
be populated in the Chromium side, either.
BUG=skia:2992
Review URL: https://codereview.chromium.org/1389213004
This CL allows the SkScanlineDecoder to decode partial
scanlines.
This is a first step in efficiently implementing subsetting
in SkScaledCodec.
BUG=skia:4209
Review URL: https://codereview.chromium.org/1390213002
At the end of TightRunBounds, glyphPosX cannot exceed the start of the
next run. But glyphPosY is running ahead of glyphPosX (for
kFull_Positioning) => the glyphPosY assert is incorrect.
Since the two pointers advance in lock-step, there isn't much value in
the glyphPosY assert anyway - we might as well remove it.
BUG=chromium:542643
R=reed@google.com,bungeman@google.com
Review URL: https://codereview.chromium.org/1405463004
Result:
- clients can get a filtered version of an image without having to setup a temp drawing environment
- for some cases, the process is more efficient even than (deprecated) drawSprite, since there is no need to draw/copy the result
Impl:
- made Proxy virtual so we don't need to have an existing device to use it
This, in conjunction with LocalMatrixImageFilter, should allow us to simplify and optimize ApplyImageFilter() in cc/output/gl_renderer.cc
BUG=skia:
Review URL: https://codereview.chromium.org/1390913005
Migrating the flag to embedder defines (Chromium already guarded).
Also augment gradient-focused GMs to generate both dithered/undithered
results.
BUG=skia:4436
R=reed@google.com,robertphillips@google.com
Review URL: https://codereview.chromium.org/1400813006
Use SkCodecPrintf instead of SkDebugf.
Check if the conversion is possible rather than starting many decodes
that will certainly fail.
Small refactor to code that deals with subsets that fall outside
of the image.
BUG=skia:
Review URL: https://codereview.chromium.org/1395383002
Note: this format does not yet pass validation tests.
Add skia_pdf_generate_pdfa GYP flag. Default to off for now.
PDF/A files are not reproducable, so they make correctness
testing harder.
Turn the Metadata struct into te SkPDFMetadata struct. This
splits out a lot of functionality around both kinds of metadata.
When PDF/A is used, add an ID entry to the trailer.
Add SkPDFObjNumMap::addObjectRecursively.
Test with
GYP_DEFINES=skia_pdf_generate_pdfa=1 bin/sync-and-gyp
ninja -C out/Release dm
out/Release/dm --config pdf --src skp gm -w /tmp/dm
With skia_pdf_generate_pdfa=0, all PDFs generated from GMs and
SKPs are identical. With skia_pdf_generate_pdfa=1, all PDFs
generated from GMs and SKPs render identically in Pdfium.
BUG=skia:3110
Review URL: https://codereview.chromium.org/1394263003
Empty font bounds are likely an indication of a font bug. As a best
effort, we can use TightRunBounds in this easily detectable case.
Since TightRunBounds only supports kDefault_Positioning currently, the
CL also reinstates handling of kFull_Positioning and
kHorizontal_Positioning (removed in http://crrev.com/858153007).
BUG=507022
R=reed@google.com,bungeman@google.com
Review URL: https://codereview.chromium.org/1399123002
Reason for revert:
SkMD5 is not really part of the Skia library. This is breaking the roll by using it, since Chromium doesn't build it.
Original issue's description:
> SkPDF: Optionally output PDF/A-2b archive format.
>
> Note: this format does not yet pass validation tests.
>
> Add skia_pdf_generate_pdfa GYP flag. Default to off for now.
> PDF/A files are not reproducable, so they make correctness
> testing harder.
>
> Turn the Metadata struct into te SkPDFMetadata struct. This
> splits out a lot of functionality around both kinds of metadata.
>
> When PDF/A is used, add an ID entry to the trailer.
>
> Add SkPDFObjNumMap::addObjectRecursively.
>
> Test with
>
> GYP_DEFINES=skia_pdf_generate_pdfa=1 bin/sync-and-gyp
> ninja -C out/Release dm
> out/Release/dm --config pdf --src skp gm -w /tmp/dm
>
> With skia_pdf_generate_pdfa=0, all PDFs generated from GMs and
> SKPs are identical. With skia_pdf_generate_pdfa=1, all PDFs
> generated from GMs and SKPs render identically in Pdfium.
>
> BUG=skia:3110
>
> Committed: https://skia.googlesource.com/skia/+/939c0fe51f157104758bcb268643c8b6d317a530TBR=tomhudson@google.com,halcanary@google.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:3110
Review URL: https://codereview.chromium.org/1398193002
Note: this format does not yet pass validation tests.
Add skia_pdf_generate_pdfa GYP flag. Default to off for now.
PDF/A files are not reproducable, so they make correctness
testing harder.
Turn the Metadata struct into te SkPDFMetadata struct. This
splits out a lot of functionality around both kinds of metadata.
When PDF/A is used, add an ID entry to the trailer.
Add SkPDFObjNumMap::addObjectRecursively.
Test with
GYP_DEFINES=skia_pdf_generate_pdfa=1 bin/sync-and-gyp
ninja -C out/Release dm
out/Release/dm --config pdf --src skp gm -w /tmp/dm
With skia_pdf_generate_pdfa=0, all PDFs generated from GMs and
SKPs are identical. With skia_pdf_generate_pdfa=1, all PDFs
generated from GMs and SKPs render identically in Pdfium.
BUG=skia:3110
Review URL: https://codereview.chromium.org/1394263003
SubsetTranslateBench.cpp:
Unref the color table, so it gets deleted.
SkBitmapRegionDecoderInterface.cpp:
Delete the stream if it is not used.
BUG=skia:3418
Review URL: https://codereview.chromium.org/1396113003
Rather than implementing some sort of "fill" in every
SkCodec subclass for incomplete images, let's make the
parent class handle this situation.
This includes an API change to SkCodec.h
SkCodec::getScanlines() now returns the number of lines it
read successfully, rather than an SkCodec::Result enum.
getScanlines() most often fails on an incomplete input, in
which case it is useful to know how many lines were
successfully decoded - this provides more information than
kIncomplete vs kSuccess. We do lose information when the
API is used improperly, as we are no longer able to return
kInvalidParameter or kScanlineNotStarted.
Known Issues:
Does not work for incomplete fFrameIsSubset gifs.
Does not work for incomplete icos.
BUG=skia:
Review URL: https://codereview.chromium.org/1332053002
Update raster gradient impls to observe the paint dithering flag.
For now this new behavior is disabled pending internal/external
client updates to mitigate diffs.
BUG=skia:4436
R=reed@google.com,mtklein@google.com,tomhudson@google.com
Review URL: https://codereview.chromium.org/1391303002
The primary goal of SkScaledCodec is to replace the current
implementation of BitmapRegionDecoder, which depends on modified
versions of libjpeg and libpng, with an implementation that uses
standard versions of the libaries. Since BitmapRegionDecoder only
supports PNG, WEBP and JPEG, limit SkScaledCodec to those classes.
We will focus on those three until we complete this primary goal.
Then we can continue to make SkScaledCodec work for other formats.
Fix some bugs in SkScaledCodec::NewFromStream:
- Handle a NULL input stream properly
- Ensure that the input stream is deleted as expected on bad data
Add tests for these error cases.
BUG=skia:4428
Review URL: https://codereview.chromium.org/1389053002
Reason for revert:
I have attempted to fix the problems that caused running nanobench with images to fail, so testing to see if they are in fact fixed.
Original issue's description:
> Pass --images '' to nanobench to disable image benchmarking.
>
> Enabling image benchmarking has caused most nanobench runs to fail,
> both Debug and Release.
>
> BUG=skia:3418
> NOTREECHECKS=true
> TBR=scroggo@google.com
>
> Committed: https://skia.googlesource.com/skia/+/1f7039c6c5f0f118b629994b0bac255345e5abd6
BUG=skia:3418
Review URL: https://codereview.chromium.org/1400633002
Instead of decoding one line at a time, if the ScanlineOrder is kNone,
decode all of the lines in one pass, and then copy the subset into the
output. This will allow us to more realistically test subset decodes
for interlaced png. It also makes running them not take forever.
Do *not* support other modes (besides kTopDown), since they are not
used by the big three we need to replace BitmapRegionDecoder
implementation (skbug.com/4428).
Fix a bug in SubsetTranslateBench and SubsetZoomBench:
When we decode another subset, we need to reset the scanline decode
first. This bug appears to have been present since the introduction of
these tests in crrev.com/1160953002
BUG=skia:4205
BUG=skia:3418
Review URL: https://codereview.chromium.org/1387233002
per-glyph GPU path object, but rather store a key for looking it up in
the resource cache. This allows the cache to purge glyphs when needed.
Also indirectly fixes a memory leak that was introduced with nvpr text
blobs.
BUG=skia:
Review URL: https://codereview.chromium.org/1374853004
We landed this originally with lazily-correct sequentially-consistent memory
order. It turns out that's regressed performance, we think particularly when
recording paths. We also think there's no need for anything but relaxed memory
order here.
We should see this chart go down if all goes well: https://perf.skia.org/#4329
There are also Chrome performance charts to watch in the linked bug.
BUG=chromium:537700
CQ_EXTRA_TRYBOTS=client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-TSAN-Trybot,Test-Ubuntu-GCC-Golo-GPU-GT610-x86_64-Release-TSAN
No public API changes.
TBR=reed@google.com
Review URL: https://codereview.chromium.org/1393833003
Reason for revert:
Breaks Chrome with this link error: ../../third_party/skia/include/effects/SkMorphologyImageFilter.h:75: error: undefined reference to 'SkMorphologyImageFilter::SkMorphologyImageFilter(int, int, SkImageFilter*, SkImageFilter::CropRect const*)'
../../third_party/skia/include/effects/SkMorphologyImageFilter.h:104: error: undefined reference to 'SkMorphologyImageFilter::SkMorphologyImageFilter(int, int, SkImageFilter*, SkImageFilter::CropRect const*)'
Presumably due to code in third_party/WebKit/Source/platform/graphics/filters/FEMorphology.cpp that contains:
#include "SkMorphologyImageFilter.h"
...
if (m_type == FEMORPHOLOGY_OPERATOR_DILATE)
return adoptRef(SkDilateImageFilter::Create(radiusX, radiusY, input.get(), &rect));
return adoptRef(SkErodeImageFilter::Create(radiusX, radiusY, input.get(), &rect));
Original issue's description:
> factories should return baseclass, allowing the impl to specialize
>
> waiting on https://codereview.chromium.org/1386163002/# to land
>
> BUG=skia:4424
>
> Committed: https://skia.googlesource.com/skia/+/80a6dcaa1b757826ed7414f64b035d512d9ccbf8TBR=senorblanco@google.com,robertphillips@google.com,reed@google.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4424
Review URL: https://codereview.chromium.org/1389063002
Even if the client chooses dimensions that were suggested by
SkIcoCodec, it is possible for the color conversion to be incorrect,
so it can still reach the exit case of kInvalidConversion.
For example, when running nanobench, we attempt to decode the image
to Alpha_8, which the codec does not support. This allows running
nanobench in debug mode without asserting.
BUG=skia:3418
Review URL: https://codereview.chromium.org/1389943002
The "zeroPath" and emptystroke GMs capture this issue.
This CL changes the following PDF GMs: emptystroke dashing4
lineclosepath dashing3 zeroPath linepath
complexclip3_complex complexclip3_simple roundrects
degeneratesegments filltypes strokerect pathfill
inverse_paths desk_chalkboard.skp
After this change, all PDF GMs look better (closer to 8888).
The dashing4, emptystroke, and zeroPath GMs still need a lot
of work to make them look right.
BUG=538726
Review URL: https://codereview.chromium.org/1374383004
