Noticed this when trybots were not using changes to
trigger_wait_ac_task.py
NoTry: true
Bug: skia:7469
Change-Id: Ifac964e247bfd6862fa030fbf5176f179ef7f3c4
Reviewed-on: https://skia-review.googlesource.com/103521
Commit-Queue: Ravi Mistry <rmistry@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Bug: skia:7469
Change-Id: I4a570a92d266d86fca20c9394c8d446df3c41e9b
Reviewed-on: https://skia-review.googlesource.com/102600
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ravi Mistry <rmistry@google.com>
It will be called from a new recipe.
This script follows the same pattern that the trigger_wait_ct_task.py used to
(https://codereview.chromium.org/1370523002).
NoTry: true
Bug: skia:7469
Change-Id: I450e415b004e7f481ca1b377d350eb64e5fa8250
Reviewed-on: https://skia-review.googlesource.com/102340
Commit-Queue: Ravi Mistry <rmistry@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Here's the current error:
==6835==WARNING: AddressSanitizer failed to allocate 0xc0000028 bytes
==6835==AddressSanitizer's allocator is terminating the process instead of returning 0
==6835==If you don't like this behavior set allocator_may_return_null=1
==6835==AddressSanitizer CHECK failed: external/compiler-rt/lib/sanitizer_common/sanitizer_allocator.cc:221 "((0)) != (0)" (0x0, 0x0)
Looking at how sk_malloc and co all funnel into sk_malloc_flags(), and
how our local sk_malloc_flags() works, I think everything would be fine
to run this bot with allocator_may_return_null=1, but I'm not sure how
to do that.
Change-Id: I155439e17dd6353b82056de12f49de34e9538643
Reviewed-on: https://skia-review.googlesource.com/101660
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Change-Id: I8154b9a0b2fcf76fa02af0efa6b57425c6f9ac31
Reviewed-on: https://skia-review.googlesource.com/101580
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Our 32-bit "arm" builds can run just fine on most ARMv8 devices. This
mode of operation is called "aarch32", as opposed to the usual mode
we're used to thinking about of running 64-bit "arm64" binaries,
"aarch64".
(Unimportant side note: there are ARMv8 chips that support only
aarch64... I think e.g. the iPhone X's CPU? There are also ARMv8 chips
that support only aarch32, rare and usually for tiny embedded things
like a watch. All the devices we test with support both aarch64 and
aarch32.)
(Technically what we call "arm" is more properly "T32" for Thumb2 32,
and "arm64" is "A64" for... ARM 64. This note is even less important
than the previous one.)
Android ships 64-bit Skia on devices that support it, but Chrome still
clings to 32-bit. So I thought it'd make sense for us to run some of
these Chrome-like builds too. I wasn't sure which ones, so I just went
nuts and mirrored all the Nexus5x bots. If you notice bots that seem
under your purview and you really don't care about how Chrome would work
in that mode, please mark them in the code review and I'll drop them.
Change-Id: I3e67070c669f5c459f4c0f5f46a68529a8eb9afc
Reviewed-on: https://skia-review.googlesource.com/101545
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
ViaSingletonPictures simulates a load pattern that Blink no longer produces.
I don't even remember what Via2ndPic and ViaTwice are meant to test,
but I imagine they're quite obsolete.
There was a lingering reference to ViaMojo, which otherwise doesn't exist.
Bug: skia:7544
Change-Id: I033fd344314054ad66c363e5dbd0a373be188069
Reviewed-on: https://skia-review.googlesource.com/88780
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Bug: skia:6687
Change-Id: I1562d7e9ded7f1be8a7ddc0c2341e54d5abbc0ae
Reviewed-on: https://skia-review.googlesource.com/97901
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
I think the Chorizo is now enforcing that our aligned loads are really
aligned. If this sticks, I'll follow up with the rest of the tests
disabled on the bug.
Bug: skia:7497
Change-Id: Id392e20ead395474f716a2c32d2643c801e03a2e
Reviewed-on: https://skia-review.googlesource.com/97202
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Bug: skia:
Change-Id: If1fc0854a42407fa6acd8d333ef49ae0b6302a81
Reviewed-on: https://skia-review.googlesource.com/95640
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Also a few more blacklists to avoid shader compilation errors
in the Debug-GPU configuration.
Bug: skia:7166
Bug: skia:6687
Change-Id: I07b5adfc62e8029ece21406f0b79b32d9adf346f
Reviewed-on: https://skia-review.googlesource.com/95560
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Bug: skia:7166
Change-Id: Iefc8c6c1b72805dfe3ec8bd06d6ba6a878307582
Reviewed-on: https://skia-review.googlesource.com/93620
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
It should work on 32 and 64 bit android running M or newer.
Bug: skia:
Change-Id: I7e6d4000f4fee8f2704b84b7174174dd0e68d21c
Reviewed-on: https://skia-review.googlesource.com/93700
Reviewed-by: Mike Klein <mtklein@chromium.org>
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
This may fix weird races in tests.
Bug: skia:
Change-Id: I41c36424c7b559301e915a0892590c74931ae463
Reviewed-on: https://skia-review.googlesource.com/93942
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Eric Boren <borenet@google.com>
Bug: skia:
Change-Id: I7394d2f392d7179777b65e77194436271efea80d
Reviewed-on: https://skia-review.googlesource.com/93760
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
We do some of this already in skpbench.
Bug: skia:
Change-Id: Ia698466e83f9b476644c126747a2f89346361d13
Reviewed-on: https://skia-review.googlesource.com/93561
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
- fill in a couple switches to allow software to rasterize gray8
- add a gray8 config to DM so we can test it
- enable this config on some bots
Today we draw gray8 using SkRasterPipeline, loading it as {g,g,g,1}
and storing using the same fixed luma math as SkLumaColorFilter.
One day it'd be nice to use the color space's luma vector if present.
Can we support this on GPU?
Change-Id: I4ee661c8bd5f33f5db2433ffb6e1bc2483af8397
Reviewed-on: https://skia-review.googlesource.com/92681
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Bug: skia:7463
Change-Id: I5dd17a5ba33f867346837f006f9dc4cb775cfa04
Reviewed-on: https://skia-review.googlesource.com/91960
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ravi Mistry <rmistry@google.com>
Bug: skia:7344
Change-Id: I019fe5e3178d13ccf3a510bdcf1c81915149def5
Reviewed-on: https://skia-review.googlesource.com/89900
Commit-Queue: Yuqian Li <liyuqian@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Bug: skia:7344
Change-Id: I458afe4abe5edff8b8ccbd5abdaf4ebbf892ee00
Reviewed-on: https://skia-review.googlesource.com/90245
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
This is a followup to https://skia-review.googlesource.com/c/skia/+/90343,
which causes task durations to increase due to copying over images, skps,
etc. on every run.
Bug: skia:7408
Change-Id: I42e829e287b7343e969159ac19c587a87ebe99e8
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/90942
Reviewed-by: Stephan Altmueller <stephana@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Bug: skia:
Change-Id: I42c528d86f19d369609b26763334e055501a9b9b
Reviewed-on: https://skia-review.googlesource.com/90880
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Bug: skia:2679
Change-Id: Ia462af01b9832da90206b9e9be2278cb48c6c502
Reviewed-on: https://skia-review.googlesource.com/86401
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Context: Email to skiabot@ from mcgreevy@
Bug: skia:
Change-Id: Ic3bc19600809bde5adcd9edd23ba4d8b126ec852
Reviewed-on: https://skia-review.googlesource.com/88540
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Ravi Mistry <rmistry@google.com>
These were removed in
https://skia-review.googlesource.com/c/skia/+/78640
However, we've now decided on the 640 rather than the 540 due to
inventory.
No-Try: true
Change-Id: Icf6db636287e151d3dd3ac74cfddf8f6bd3bea6a
Reviewed-on: https://skia-review.googlesource.com/87202
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
This reverts commit de71572f65.
Revert "Revert "Transform vertices for distance field glyphs on CPU.""
This reverts commit f226e66d75.
Change-Id: I2545afae3beb1d6b14bba056853ed826ae7a4679
Reviewed-on: https://skia-review.googlesource.com/86603
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Bug: skia:7409
Change-Id: I6c9d86af147f5234a0484e43e053ce1758cb312d
Reviewed-on: https://skia-review.googlesource.com/85400
Reviewed-by: Mike Klein <mtklein@chromium.org>
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
This will make it easier to transition to new cert.
Bug: skia:7408
Change-Id: I9263851233f492c5e62155b61541783aa86ba634
Reviewed-on: https://skia-review.googlesource.com/85006
Reviewed-by: Stephan Altmueller <stephana@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Bug: skia:7409
Change-Id: Ic86696880858b9744bf9cea86caa3564c1a5e5af
Reviewed-on: https://skia-review.googlesource.com/85003
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Add a job that doesn't allow fallback so we know when things aren't
working as expected.
Change-Id: If993976d6807635bde455c2091f8a1ba18c41e27
Reviewed-on: https://skia-review.googlesource.com/83700
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
No-Try: true
Change-Id: I229c2839d423d543ea7bd1aedec893d7bfeb27ea
Reviewed-on: https://skia-review.googlesource.com/83701
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
This reverts commit 43307c09b9.
Reason for revert: Fixed this time. Echo 1 > already online cpu
returns exit code 1, which makes python over-react.
Original change's description:
> Revert "Disable extra CPUs during Nanobench"
>
> This reverts commit 32af335e7a.
>
> Reason for revert: many unhappy android bots
>
> Original change's description:
> > Disable extra CPUs during Nanobench
> >
> > The previous experiment revealed that nanobench can
> > run on any of the online CPUs, so rather than put
> > the ones we don't need/want into powersave mode, just
> > disable them.
> >
> > Maybe in the future we can run CPU tests on the big
> > or LITTLE cpus to get perf data on higher end or
> > lower end cpus, but only if we get very stable
> > results from this.
> >
> > Bug: skia:7378
> > Change-Id: I057513a691093e7f73c0f5790e17fab1a5ec0bc4
> > Reviewed-on: https://skia-review.googlesource.com/84820
> > Reviewed-by: Kevin Lubick <kjlubick@google.com>
> > Commit-Queue: Kevin Lubick <kjlubick@google.com>
>
> TBR=borenet@google.com,mtklein@google.com,kjlubick@google.com
>
> Change-Id: I23c37a6bde631e95f0b4ae7277ec8fcf325a00e9
> Bug: skia:7378
> Reviewed-on: https://skia-review.googlesource.com/84921
> Reviewed-by: Mike Klein <mtklein@google.com>
> Commit-Queue: Mike Klein <mtklein@google.com>
No-Tree-Checks: true
Change-Id: Ie7f0a3dc6ba55c124c796aba16a0f0497f285f3a
Bug: skia:7378
Reviewed-on: https://skia-review.googlesource.com/84865
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
This reverts commit 32af335e7a.
Reason for revert: many unhappy android bots
Original change's description:
> Disable extra CPUs during Nanobench
>
> The previous experiment revealed that nanobench can
> run on any of the online CPUs, so rather than put
> the ones we don't need/want into powersave mode, just
> disable them.
>
> Maybe in the future we can run CPU tests on the big
> or LITTLE cpus to get perf data on higher end or
> lower end cpus, but only if we get very stable
> results from this.
>
> Bug: skia:7378
> notry=true
> notreechecks=true
> Change-Id: I057513a691093e7f73c0f5790e17fab1a5ec0bc4
> Reviewed-on: https://skia-review.googlesource.com/84820
> Reviewed-by: Kevin Lubick <kjlubick@google.com>
> Commit-Queue: Kevin Lubick <kjlubick@google.com>
TBR=borenet@google.com,mtklein@google.com,kjlubick@google.com
Change-Id: I23c37a6bde631e95f0b4ae7277ec8fcf325a00e9
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:7378
Reviewed-on: https://skia-review.googlesource.com/84921
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
The previous experiment revealed that nanobench can
run on any of the online CPUs, so rather than put
the ones we don't need/want into powersave mode, just
disable them.
Maybe in the future we can run CPU tests on the big
or LITTLE cpus to get perf data on higher end or
lower end cpus, but only if we get very stable
results from this.
Bug: skia:7378
notry=true
notreechecks=true
Change-Id: I057513a691093e7f73c0f5790e17fab1a5ec0bc4
Reviewed-on: https://skia-review.googlesource.com/84820
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Change-Id: I26e75cf6cd865ec6c47b7766679177bfd30387da
Reviewed-on: https://skia-review.googlesource.com/82921
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
We no longer have any reason to suspect there's anything wrong with
these configurations, and we're not actively debugging anything
related to them anymore.
I've kept the normal Debug/Release bots.
Change-Id: I1a3d8087b519d6f01223d3b33bce762511056d1a
Reviewed-on: https://skia-review.googlesource.com/84522
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
These should be free of overflows now.
Bug: skia:7052
Change-Id: I05118fb8f565ffb0d973b6d93a8cd8d8e27f31a9
Reviewed-on: https://skia-review.googlesource.com/84561
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Change-Id: I7baae5f90b2e510b66443cda449071c7c6ec9ec7
Reviewed-on: https://skia-review.googlesource.com/83520
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Bug: skia:7384
Change-Id: Ifcb19c864d422781d6023606406ac2b7dd23b0f8
Reviewed-on: https://skia-review.googlesource.com/84121
Reviewed-by: Greg Daniel <egdaniel@google.com>
Reviewed-by: Ravi Mistry <rmistry@google.com>
Commit-Queue: Eric Boren <borenet@google.com>
Perf was nice and flat after https://skia-review.googlesource.com/c/skia/+/83240
but there was a 4-5x slowdown on the benchmarks themselves,
indicating that perhaps we were running nanobench on the
LITTLE cores (now on powersave) instead of the big cores we
thought (which were recently scaled down).
This experiment will show us FOR CERTAIN that we are
running on core 0 or 1 which is at .6 max frequency.
We expect to see a speedup from the previous results.
This is leading to turning of CPUs we don't need
to make sure nanobench is running on the ones we expect.
Bug: skia:
NOTRY=true
Change-Id: Ida65181e4d90e778e65e3f22d761288b9ade64f6
Reviewed-on: https://skia-review.googlesource.com/84201
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Bug: skia:7399
Change-Id: Id60773f77694b06a938f9a126f30ca56e4965d30
Reviewed-on: https://skia-review.googlesource.com/83981
Commit-Queue: Ravi Mistry <rmistry@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Bug: skia:7310
Change-Id: I7eeb73eb6d9c07549bf7a5d7c2d8b4d3049ac3da
Reviewed-on: https://skia-review.googlesource.com/83860
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ravi Mistry <rmistry@google.com>
They seem to be their own special cases for what
governors they support.
Bug: skia:
NOTRY=true
Change-Id: I7bb220e1d3ba6851c17c7e6ef327aab24ffdba42
Reviewed-on: https://skia-review.googlesource.com/83900
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
If the stacktrace wasn't in the last 200 lines, we couldn't
find and symbolize it.
https://chromium-swarm.appspot.com/task?id=3a5e86a9d0e04e10&refresh=10
We increase the window to 500 lines to account for large memory maps.
Bug: skia:7397
NOTRY=true
Change-Id: Ic8583e383663a9beb62a32e90a5bd5d73d7446a7
Reviewed-on: https://skia-review.googlesource.com/83540
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
This scaling logic correctly accounts for some devices
which have multiple CPUs. Previously, we were scaling
the smaller of these CPUs, which likely had a negative
impact on nanobench, given nanobench was single threaded
and the CPUs weren't allowed to idle much (because we
set the CPU).
This CL sets those additional CPUs to powersave when we run
nanobench and then correctly scales down the beefier
CPU we want to run nanobench on.
For DM, we just run it in ondemand mode, which will
hopefully be "as fast as possible", but allow the CPU
governor to scale down if overheating becomes a problem.
Bug: skia:7378
notry=TRUE
Change-Id: I45ca5d9fb32182233d1b2d094842c879f2b84da4
Reviewed-on: https://skia-review.googlesource.com/83240
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
To enable, set skia_embed_resources=true in args.gn.
Also add *-EmbededResouces bots.
Change-Id: Ia69b26e926a3ad4676a4fa021894432ea2104538
Reviewed-on: https://skia-review.googlesource.com/82626
Commit-Queue: Hal Canary <halcanary@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
The Nexus5x took these jobs in https://skia-review.googlesource.com/c/skia/+/82624
Also filed skia:7394 for missing coverage of "--gpuThreads 0".
Bug: skia:7382
Change-Id: If0fd823722d8b8cc3845f8d96a0a285fec935f74
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/83360
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
No-Try: true
Change-Id: I9c07250623603be1baccdc177191326017784aa2
Reviewed-on: https://skia-review.googlesource.com/82604
Reviewed-by: Eric Boren <borenet@google.com>
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
The new bot:
1) Extracts all fiddles out of markdown files.
2) Forces fiddle.skia.org to compile all those fiddles and get output in JSON.
3) Scans the output and reports any compiletime/runtime errors.
4) Updates markdown in site/user/api/ using the new hashes (if any) from fiddle.skia.org.
To ensure the bot does not check in unexpected changes:
* upload_md.py makes sure that all modified files are under site/user/api/. It errors out if this is not the case.
* CLs with docs only changes normally have 'NoTry: true' added to their descriptions. This is not done for the new bot because we want to run it through trybots to make sure nothing unexpected snuck in.
* rmistry@ and caryclark@ are automatically CC'ed on all uploaded changes. I plan to watch the bot closely for at least a couple of weeks.
Bug: skia:7310
Change-Id: I759fc8bae1e32a6f175e3b1a895947d14ca5fe3a
Reviewed-on: https://skia-review.googlesource.com/79941
Commit-Queue: Ravi Mistry <rmistry@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Using full paths in skia.h causes "file not found" with Goma. All other
Builds seem fine without the path, so I changed find_headers.py to use
the basename.
Change-Id: Ib520e91a92ebffe36a736eb53f643d359f5bb2ce
Reviewed-on: https://skia-review.googlesource.com/79360
Reviewed-by: Greg Daniel <egdaniel@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
For reference, the version number is pulled from:
chromium/src/third_party/llvm-build/cr_build_revision
This version of clang includes fixes for bugs in the latest
Windows 10 SDK headers.
Bug: skia:
Change-Id: Ieee6eb2dff2f98a2340a8433135b6c3f916c0577
Reviewed-on: https://skia-review.googlesource.com/82721
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
This is an automated CL created by the recipe roller. This CL rolls recipe
changes from upstream projects (e.g. depot_tools) into downstream projects
(e.g. tools/build).
Please review the expectation changes, and LGTM+CQ.
More info is at https://goo.gl/zkKdpD. Use https://goo.gl/noib3a to file a bug.
depot_tools:
https://crrev.com/bb85b3636b13b7a3514a198b30c583439c009970 bot_update source manifest: fix test_api.py to match the actual output (hinoka@google.com)
R=kjlubick@google.com
Recipe-Tryjob-Bypass-Reason: Autoroller
Bugdroid-Send-Email: False
Change-Id: If6efa9cbe00163301023a847c06f10e37067f4c0
Reviewed-on: https://skia-review.googlesource.com/82540
Commit-Queue: Eric Boren <borenet@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
'windk' is no longer a thing. There are two separate variables to point
at your compiler (win_vc), and SDK (win_sdk).
'msvc' is no longer a thing, either. By default, we look for 2017 and
then 2015 (in the default locations). If neither is located, use an
assert to let users know they should set win_vc. Then, detect if win_vc
points at a 2017 or 2015 installation, and configure it automatically.
Because the toolchain is now 2017, update the GN files to handle building
x86 in that configuration. In fact, we only support x86 builds (with 2017
or 2015) using the toolchain assets. Keep a 2015 toolchain around as a
new asset, so we can add bot coverage.
Docs-Preview: https://skia.org/?cl=81841
Bug: skia:
Change-Id: I8c68a6f949e54c0e798a219450bbb9406f8dc6ac
Reviewed-on: https://skia-review.googlesource.com/81841
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Brian Osman <brianosman@google.com>
Bug: skia:7310
Change-Id: I8ef505025e2cf0b7859e54e85293efed16704398
Reviewed-on: https://skia-review.googlesource.com/82200
Commit-Queue: Ravi Mistry <rmistry@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Add logic to run on Nexus 5xs in Golo.
Bug:788839
Change-Id: I12290d11a0b1b0f012ada216da3e5b2599979c5e
Reviewed-on: https://skia-review.googlesource.com/81861
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Bug: skia:7381
Change-Id: I2dd5443c81cd895eb1d68b0cd90221a7e2e07d46
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/80843
Reviewed-by: Mike Klein <mtklein@chromium.org>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
This reverts commit 66db75da67.
Reason for revert: Breaking PDFium/Flutter
Original change's description:
> [infra] Move commands from isolates to gen_tasks.go
>
> This has the side effect of bundling recipes for all tasks,
> which will be required anyway to run recipes in the future.
>
> Bug: skia:7050
> Change-Id: Ia30a95c750f2a237a8bf60263b2981682673c043
> Reviewed-on: https://skia-review.googlesource.com/81300
> Commit-Queue: Eric Boren <borenet@google.com>
> Reviewed-by: Kevin Lubick <kjlubick@google.com>
TBR=borenet@google.com,bungeman@google.com,rmistry@google.com,kjlubick@google.com
Change-Id: I38e00294f098ac91285a5cc464414654fc79a9e9
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:7050
Reviewed-on: https://skia-review.googlesource.com/81741
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Eric Boren <borenet@google.com>
This has the side effect of bundling recipes for all tasks,
which will be required anyway to run recipes in the future.
Bug: skia:7050
Change-Id: Ia30a95c750f2a237a8bf60263b2981682673c043
Reviewed-on: https://skia-review.googlesource.com/81300
Commit-Queue: Eric Boren <borenet@google.com>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Bug: b/70203010
From https://github.com/libjpeg-turbo/libjpeg-turbo/commit/c308d434.
This commit fixes a bug in BitmapRegionDecoder, and is the tip of tree.
Rather than using our mirror, just pull in upstream directly. Move our
config files into third_party/libjpeg-turbo, so we can just DEPS to
upstream. These files are unchanged, except jconfig.h, where I added a
comment regarding arithmetic coding.
Add a test image which demonstrates the bug.
Change-Id: I00f8f961f69e407dc31ca6d15c66518aa0acbafd
Reviewed-on: https://skia-review.googlesource.com/81442
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Leon Scroggins <scroggo@google.com>
This is a reland of 6da1d32c16
Original change's description:
> Always use the Win 10 SDK, and optionally detect/use the latest version
>
> For bot toolchain builds, we were already using the Win 10 SDK. Local
> 2015 builds were using a strange hybrid of Win 10 and Win 8 SDKs. Now
> we always use the Win 10 SDK exclusively.
>
> This adds two new GN arguments: win_sdk, which points at the top level
> Windows 10 SDK directory, and win_sdk_version, which can be used to
> pin to a specific version. (Otherwise we use a script to detect the
> most recent version).
>
> Bug: skia:
> Change-Id: I5aabb5eb9e7f483e3676b67b50356ddd0421cf7d
> Reviewed-on: https://skia-review.googlesource.com/81304
> Reviewed-by: Mike Klein <mtklein@chromium.org>
> Commit-Queue: Brian Osman <brianosman@google.com>
Bug: skia:
Change-Id: Ide0d6bd3413c4fe7a8bada7d3d32bdba9709d11b
Reviewed-on: https://skia-review.googlesource.com/81501
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
This reverts commit 6da1d32c16.
Reason for revert:
Caused Build-Win-Clang-arm64-Release-Android to fail.
Eg: https://chromium-swarm.appspot.com/task?id=3a467f1ddd15fb10&refresh=10
Original change's description:
> Always use the Win 10 SDK, and optionally detect/use the latest version
>
> For bot toolchain builds, we were already using the Win 10 SDK. Local
> 2015 builds were using a strange hybrid of Win 10 and Win 8 SDKs. Now
> we always use the Win 10 SDK exclusively.
>
> This adds two new GN arguments: win_sdk, which points at the top level
> Windows 10 SDK directory, and win_sdk_version, which can be used to
> pin to a specific version. (Otherwise we use a script to detect the
> most recent version).
>
> Bug: skia:
> Change-Id: I5aabb5eb9e7f483e3676b67b50356ddd0421cf7d
> Reviewed-on: https://skia-review.googlesource.com/81304
> Reviewed-by: Mike Klein <mtklein@chromium.org>
> Commit-Queue: Brian Osman <brianosman@google.com>
TBR=mtklein@chromium.org,borenet@google.com,bungeman@google.com,brianosman@google.com
Change-Id: Id044114fc685d570741e3f5ed003c4be2ffa84a3
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/81500
Reviewed-by: Ravi Mistry <rmistry@google.com>
Commit-Queue: Ravi Mistry <rmistry@google.com>
It throttles 1000x more than intended, and I suspect that some of the
trip points it uses to decide when to throttle make no sense. We've
already turned it off on the Nexus 5x.
Change-Id: Idf556a83fe61ccc5f63c7bede3eecbe80087e28b
Reviewed-on: https://skia-review.googlesource.com/81303
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
For bot toolchain builds, we were already using the Win 10 SDK. Local
2015 builds were using a strange hybrid of Win 10 and Win 8 SDKs. Now
we always use the Win 10 SDK exclusively.
This adds two new GN arguments: win_sdk, which points at the top level
Windows 10 SDK directory, and win_sdk_version, which can be used to
pin to a specific version. (Otherwise we use a script to detect the
most recent version).
Bug: skia:
Change-Id: I5aabb5eb9e7f483e3676b67b50356ddd0421cf7d
Reviewed-on: https://skia-review.googlesource.com/81304
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Brian Osman <brianosman@google.com>
Bug: skia:
NOTRY=true
Change-Id: Ice619a9eed43bc3b1ecd54f1851f527bd0623cd2
Reviewed-on: https://skia-review.googlesource.com/81380
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
It's causing a lot of sleep for being too hot. ThermalManager assumes
the trip points are static, when in fact, they are dynamic.
Bug: skia:7378
NOTRY=true
Change-Id: I907a42986831b7072a03a0423afd5a36bb2dfa74
Reviewed-on: https://skia-review.googlesource.com/80981
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Switch all ANGLE bots to build with Clang, sort, and dedup.
And remove -x86- ANGLE builders... there's no good reason to have
builders for this config unless we're going to Test/Perf it.
Bug: skia:7377
Change-Id: I1daf8ffa98e098274a4de0ff2c40a4a7e958b211
Reviewed-on: https://skia-review.googlesource.com/80740
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
This should prevent version skew and allow us to include this in
Gold results/bugs.
Bug: skia:
NOTRY=true
Change-Id: I9edacbb478e310eca39d2b56ac2059f26b0cb127
Reviewed-on: https://skia-review.googlesource.com/79940
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Reviewed-by: Stephan Altmueller <stephana@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
The new check was a different config while we fixed the errors. Most
errors are now fixed, and merging these will help with running both on
the CQ.
No-Try: true
Change-Id: I5804ecea84a8dbbaacf6a4ea96e2af9505641d49
Reviewed-on: https://skia-review.googlesource.com/79323
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
See also: https://chrome-internal-review.googlesource.com/c/infradata/config/+/520679
This should help prevent many many Valgrind bots from
taking all the resources from the rest of the P400 bots
(including the CQ). This is a temporary measure, hopefully
TaskScheduler will be able to do this by itself in the future.
Bug: skia:
NOTRY=true
Change-Id: Ia618f9bd90364c6658e6b08b19c8bf214e5c33d9
Reviewed-on: https://skia-review.googlesource.com/79760
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
IntelIris640 is 100% identical to IntelIris540 on Gold.
No-Try: true
Change-Id: I0e5342b182267a7d6ee510329b7c8ab7cb3a479e
Reviewed-on: https://skia-review.googlesource.com/78640
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
The previous list was created from scaling_min_freq and scaling_max_freq
instead of cpuinfo_min_freq and cpuinfo_max_freq which are the actual mins
and maxes, not the current (transient) settings of the governor.
Before:
Test-Release: 61 minutes
Perf-Debug: 41 minutes
After:
Test-Release: 32 minutes
Perf-Debug: 16 minutes
NOTRY=true
Bug: skia:
Change-Id: I9b431e92d2abcecb4fe643389daddc912a1399e1
Reviewed-on: https://skia-review.googlesource.com/78141
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Some bots, especially the Nexus 7s, seemed to occasionally
fail when setting the CPU frequency. I was unable to
repro this behavior, so this is a shotgun approach.
We add a 5 second delay between setting and checking,
checking frequency using scaling_cur_freq instead of
scaling_setspeed, set the min_freq as well as max_freq,
and retry up to 3 times if setting cpu frequency fails.
NOTRY=true
Bug: skia:
Change-Id: Id4d85d8d509c9dba8e3a0e06b5992f5adadf36d2
Reviewed-on: https://skia-review.googlesource.com/78140
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
This reverts commit 373588426b.
Reason for revert: Have enough digests on Gold now.
Original change's description:
> Temporarily add Ubuntu IntelHD4400 jobs.
>
> I want to compare this with the IntelBayTrail and if the results are
> similar, replace those bots.
>
> No-Try: true
> Change-Id: Ib5476fe91dc446182cd1b37e93fe17962dcf961a
> Reviewed-on: https://skia-review.googlesource.com/76900
> Reviewed-by: Kevin Lubick <kjlubick@google.com>
> Commit-Queue: Ben Wagner <benjaminwagner@google.com>
TBR=benjaminwagner@google.com,kjlubick@google.com
Change-Id: Ica07d1ee635e59e3d3da51ee73591ffe08310e34
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/77860
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
This change, when combined with https://skia-review.googlesource.com/c/buildbot/+/77701
should cut down on the duplicated work of extracting the large
toolchains from CIPD.
Since the Isolate* steps can be cached (i.e. are idempotent)
they will only run about 1/week (unless updated) and
all subsequent tasks (primarily Builds) will go much faster.
We estimate the overhead on Build-Debian-Android to go from
about 90s (which was more time than the actual build) to
about 10s. Build-Win-Vulkan's overhead will improve from
about 180s to about 35s (1/3 of which is uploading to isolate).
Other CIPD assets could be handled in a similar fashion;
the ones here are the biggest offenders and the lowest
hanging fruit. Doing this to other assets (e.g. clang_win)
would have minimal improvements (<10s).
There are other tasks with large amounts of overhead
(e.g. Build-Mac-Android, Build-Win-Android, Build-WASM)
but none of those are depended on by any Tests, so any
speed-ups would have less wide-reaching-impact, at the
cost of using more Isolate cache/diskspace.
See https://docs.google.com/document/d/1DFlcpqg7XqEPE5oYT1V3so2ih2285heS5w3mPT-GMBA/edit#
for more information.
Bug: skia:
Change-Id: I40dd87fe72c3d49292762a09dad6df0dfbe78f61
Reviewed-on: https://skia-review.googlesource.com/77560
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
This has the side effect of using the bots in the new GCE project as
well.
Bug: skia:7278
Change-Id: Ie14c93d6e3d12ccbfb679089bc50bca482fbf605
Reviewed-on: https://skia-review.googlesource.com/76261
Commit-Queue: Eric Boren <borenet@google.com>
Reviewed-by: Ravi Mistry <rmistry@google.com>
Bug: skia:
Change-Id: Iefef7d617e58de2b3be2e27aac075f822641e4ce
Reviewed-on: https://skia-review.googlesource.com/77641
Reviewed-by: Stephan Altmueller <stephana@google.com>
Commit-Queue: Eric Boren <borenet@google.com>
I want to compare this with the IntelBayTrail and if the results are
similar, replace those bots.
No-Try: true
Change-Id: Ib5476fe91dc446182cd1b37e93fe17962dcf961a
Reviewed-on: https://skia-review.googlesource.com/76900
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Change-Id: Iee28f684bd6fa541e36f677ee4261e637cbd4611
Reviewed-on: https://skia-review.googlesource.com/77201
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
For internal hardware, it tends not to work - they work at one
clock speed, despite advertising others.
Bug: skia:
NOTRY=true
Change-Id: I10bf0fc1ab4d60bfbc2eefcef5b42ceab9e3f435
Reviewed-on: https://skia-review.googlesource.com/76720
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Also drive-by cleanup of "Win8-MSVC-ShuttleB", none of which currently
exist.
No-Try: true
Change-Id: Ide28481939b7ec2a0733ab07673379c951123f5d
Reviewed-on: https://skia-review.googlesource.com/75361
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Bug: skia:
Change-Id: I36cb94877d513fc81c211b0e58b5c4be0451ac91
Reviewed-on: https://skia-review.googlesource.com/74601
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Bug: skia:
Change-Id: I391cbc6cb2bf2ae88af0612964f4265788c8e771
Reviewed-on: https://skia-review.googlesource.com/74600
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Bug: skia:
NOTRY=true
Change-Id: I1a1755dd03f2e6ebd8d9b2c9235cca8eb34f04ad
Reviewed-on: https://skia-review.googlesource.com/75280
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
This also makes *sure* the CPU frequency we set the
device to actually "takes". Along the way, I learned
if scaling_max_freq is < the frequency we set, the
scaling_max_freq will be used instead, which was
happening to the PixelCs and AndroidOnes.
As a result, this may make those two Test- configs faster.
Bug: skia:
Change-Id: I10c98d37e296a19e1cf67bfe7269bb59cdd912d5
Reviewed-on: https://skia-review.googlesource.com/74360
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
These will be replaced by the Nexus 5x.
Bug: skia:7309
No-Try: true
Change-Id: I2a56a494203f2af41f16dcfd55ebe1ca28e9e939
Reviewed-on: https://skia-review.googlesource.com/73881
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Bug: skia:
Change-Id: I994f67c3043306d7fa612feb03f8fbe8d7bf4c91
Reviewed-on: https://skia-review.googlesource.com/73760
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Change-Id: I667e0b8206461df797f0f5e481fe78a3f928481a
Reviewed-on: https://skia-review.googlesource.com/73261
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Will remove after transition to new image.
Change-Id: I4254643aa1279b6e2046d2cdef9ff1d481f85531
Reviewed-on: https://skia-review.googlesource.com/73260
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
The old code made the wrong assumptions about premultiplication.
There are three relevant steps here for decoding a webp frame:
1 tell libwebp to decode
2 colorXform the result (sometimes)
3 blend with the prior frame (sometimes)
Rearrange the code to premultiply at the blend step, in a linear space.
If the client wants unpremul, the blend step will unpremul after.
If there is no blending, the colorXform (if any) will premultiply.
If only step 1 is necessary, let libwebp premultiply.
This fixes an animated image that has an opaque frame 0 followed by a
frame with alpha that blends with it.
Add the test image that failed (https://mathiasbynens.be/demo/animated-webp)
The prior fix is in 42bae8faa4. It did
not properly handle the colorXform when there was no blending step.
Change-Id: I2b9d265ba162eaf7e55a106c8f79341826cee0d3
Reviewed-on: https://skia-review.googlesource.com/72281
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
One (Win7) GDI bot is enough.
Change-Id: I03312c21e7b6da2a50225fd5dbc50bc69a6bd4c2
Reviewed-on: https://skia-review.googlesource.com/72640
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
The bots that execute these jobs produce noisy perf numbers.
No-Try: true
Change-Id: Icb3a54e324e0823f680042838b6f883ff5937f93
Reviewed-on: https://skia-review.googlesource.com/72200
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Bug: skia:7305
Change-Id: Ifb270cba27daaef75d3930f990e19215a251ca28
Reviewed-on: https://skia-review.googlesource.com/71921
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
This isn't used and has become a maintenance burden.
Change-Id: I5f3af8f91e5c4f073fe4ea30e0a7f1f61efeea47
Reviewed-on: https://skia-review.googlesource.com/70640
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Change-Id: I15b76d5da795ee01eb7e403721beebf5f67d1bc4
Reviewed-on: https://skia-review.googlesource.com/71920
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Bug: skia:
Change-Id: Ie56f848889cfc7331109aed997a85bc42e27f60e
Reviewed-on: https://skia-review.googlesource.com/70724
Commit-Queue: Eric Boren <borenet@google.com>
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Bug: skia:7296
Change-Id: Id30df3ed2264679338913f275caa69b8e2278075
Reviewed-on: https://skia-review.googlesource.com/70661
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
This reverts commit 42bae8faa4.
Reason for revert: Breaking GMs. A more extensive fix is needed.
Original change's description:
> Fix webp bug compositing alpha frames on opaque
>
> select_xform_alpha is used to determine how the color transform should
> handle alpha values. In a similar way, we're using it here to determine
> whether to premultiply pixels before blending them. In this case, the
> source is unpremul, so we should be premultiplying them, but since we
> are compositing on an opaque frame, the dst must be opaque and
> select_xform_alpha returns kOpaque. As a result, we do not premultiply
> (and even hint to the transform that the pixels are opaque). Since this
> all applies to the pre-blended pixels, we should not care that the dst
> is opaque. So drop the call to select_xform_alpha and just use the alpha
> type of the source. This matches the comment on the lines above.
>
> Add the test image that failed (https://mathiasbynens.be/demo/animated-webp)
>
> Change-Id: Ibd13c1f067bdf369ce1c882d4f6057aadccfa313
> Reviewed-on: https://skia-review.googlesource.com/71560
> Commit-Queue: Leon Scroggins <scroggo@google.com>
> Reviewed-by: Mike Klein <mtklein@chromium.org>
TBR=mtklein@chromium.org,scroggo@google.com
Change-Id: I6f535ff9b773a93e02a0358b830291594a6e738c
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/71720
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
select_xform_alpha is used to determine how the color transform should
handle alpha values. In a similar way, we're using it here to determine
whether to premultiply pixels before blending them. In this case, the
source is unpremul, so we should be premultiplying them, but since we
are compositing on an opaque frame, the dst must be opaque and
select_xform_alpha returns kOpaque. As a result, we do not premultiply
(and even hint to the transform that the pixels are opaque). Since this
all applies to the pre-blended pixels, we should not care that the dst
is opaque. So drop the call to select_xform_alpha and just use the alpha
type of the source. This matches the comment on the lines above.
Add the test image that failed (https://mathiasbynens.be/demo/animated-webp)
Change-Id: Ibd13c1f067bdf369ce1c882d4f6057aadccfa313
Reviewed-on: https://skia-review.googlesource.com/71560
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Change-Id: I7df9d1a9118fbd9c545912a38af4f94276f20b0f
Reviewed-on: https://skia-review.googlesource.com/71521
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
These won't have the "Win" or "Win10" bits in them anymore.
Change-Id: I2917c4227efcac7c2169a111fdaf62fcd83ea94a
Reviewed-on: https://skia-review.googlesource.com/70800
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
- Replace build-time GDI support in all of Skia
with run-time GDI support only in DM.
- Make the GDI bots NativeFont bots paralelling
the other NativeFonts bots.
Change-Id: I424b20f6983d8a8ba8574650efefea2b8776bbe2
Reviewed-on: https://skia-review.googlesource.com/70721
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
readd [scaled_]tilemodes_npot to blacklist after it was removed last week
since it is failing randomly on bots.
Bug: skia:
Change-Id: Ieef97470c1ae4c960fa6efb7294e2ff203cc0bd6
Reviewed-on: https://skia-review.googlesource.com/70740
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
a.k.a. GM fontpocalypse
Change-Id: If834940574adea29b48f35abec61f0a1c9bd59d3
Reviewed-on: https://skia-review.googlesource.com/69881
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
The test takes so long that the bot times out.
Bug: skia:
Change-Id: I77e7b192a1df1f422e61f09a931b7576fa55fbde
Reviewed-on: https://skia-review.googlesource.com/68440
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Bug: skia:
Change-Id: I48e37d1449c14298d03eea9c07a9aee1af78b47a
Reviewed-on: https://skia-review.googlesource.com/67809
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
I'm going to be adding changes to bots matching this pattern, but want
the previous expectation files in first.
Bug: skia:
Change-Id: I61101a0ce7c66dde1e28dc307f8f7c5f66d6644e
Reviewed-on: https://skia-review.googlesource.com/67852
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
These are no different from other bots yet, except that they only run
8888 GMs and unit tests. They will in the future pass --nativeFonts
true, while other bots will pass --nativeFonts false, the effect of
which has not quite yet been pinned down.
Change-Id: I467852269856dda05330957bc357ef15a2c2a1eb
Reviewed-on: https://skia-review.googlesource.com/67769
Commit-Queue: Mike Klein <mtklein@chromium.org>
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
This makes failing builds print all failures, not just the first.
Successful builds, the usual case, are unaffected.
Change-Id: I8dde21e913f6715e7760b298a87f51d1b40a8789
Reviewed-on: https://skia-review.googlesource.com/67803
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Bug: skia:
Change-Id: I354c295ce04f5e478e88f724e0b17ce90496a4cc
Reviewed-on: https://skia-review.googlesource.com/65341
Commit-Queue: Yuqian Li <liyuqian@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Bug: skia:
NOTRY=true
Change-Id: I500eae85ec334dc7121266ebd2f41dc526ec4695
Reviewed-on: https://skia-review.googlesource.com/66880
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Adding -O1 and reducing the shards to cut down on overhead
in post-production. This seems to save us a few minutes
(e.g. ~26 -> ~23 minutes).
The optimized code has about 600 fewer reachable lines of code
(according to the Coverage measurement), which is acceptable
given our tests run on -O1 or better.
Experiments (in this review) show that O3 is faster than O1,
but not significantly enough where we want to deviate from
our normal Debug bots:
Control: 73 minutes
-O1: 59 minutes
-O2: 60 minutes
-O3: 50 minutes
Bug: skia:
NOTRY=true
Change-Id: I33344c1cd2408373004d010e36ce27d6aa03deb2
Reviewed-on: https://skia-review.googlesource.com/65503
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
This reverts commit 85e98387a3.
Reason for revert: brakes build
Original change's description:
> Add testcase for gbr config running on GTX1070 bots to test.py
>
> Bug: skia:
> Change-Id: I1f993100af712ce688dd21b5e510ffae4b587dce
> Reviewed-on: https://skia-review.googlesource.com/66155
> Commit-Queue: Brian Osman <brianosman@google.com>
> Commit-Queue: Mike Klein <mtklein@chromium.org>
> Reviewed-by: Mike Klein <mtklein@chromium.org>
TBR=mtklein@chromium.org,mtklein@google.com,brianosman@google.com
Change-Id: I3abebe01bb0285377321ed150cca0c76e8636a39
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/66422
Reviewed-by: Stan Iliev <stani@google.com>
Commit-Queue: Stan Iliev <stani@google.com>
This is a placeholder until we can get ANGLE working on these bots.
Bug: skia:6734
Change-Id: I8361da10acaa3c85faaa8ebfc1f1797d3f5e90f7
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/26368
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
This is an automated CL created by the recipe roller. This CL rolls recipe
changes from upstream projects (e.g. depot_tools) into downstream projects
(e.g. tools/build).
Please review the expectation changes, and LGTM+CQ.
More info is at https://goo.gl/zkKdpD. Use https://goo.gl/noib3a to file a bug.
depot_tools:
https://crrev.com/47b67c426b1d7120803e09f570e1cca312b34249 Reland "bot_update recipe: Upload source manifest" (hinoka@google.com)
R=kjlubick@google.com
Recipe-Tryjob-Bypass-Reason: Autoroller
Bugdroid-Send-Email: False
Change-Id: I22d3c671c6d0e654be19661c8e0d9795f920dc56
Reviewed-on: https://skia-review.googlesource.com/66060
Commit-Queue: Eric Boren <borenet@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Reviewed-by: Ryan Tseng <hinoka@google.com>
Bug: skia:
Change-Id: I1f993100af712ce688dd21b5e510ffae4b587dce
Reviewed-on: https://skia-review.googlesource.com/66155
Commit-Queue: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Bug: skia:
Change-Id: I98042ea6e7fe8b81e5f1cb38d8287a6cff394279
Reviewed-on: https://skia-review.googlesource.com/66151
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
The 4444 image in all_bitmap_configs now draws slightly different before
and after serialization. (It's serialized as 8888.) Still looks fine.
Change-Id: I1396cf1550b6769a1734ed25d59bd5b1866dfacd
Reviewed-on: https://skia-review.googlesource.com/65960
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Bug: skia:7249
NOTRY=true
Change-Id: I877c8aa40c4529fdf7ae98b61e5742b93ce78c70
Reviewed-on: https://skia-review.googlesource.com/65821
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
This reverts commit 5b9a037bf4.
Reason for revert:
I got confused in here somewhere and everything is drawing wrong.
Original change's description:
> gbr- has been brg- this whole time...
>
> Rewrite things to make that a little clearer.
>
> A red pixel ends up in channel 2, what would naively draw as blue
> without a rotation. A green pixel ends up in channel 0, which would
> naively draw as red without rotation. A blue pixel ends up in channel
> 1, which would naively draw as green without this rotation.
>
> So this transformation is:
>
> r -> b
> g -> r
> b -> g
>
> i.e. rgb_to_brg
>
> Change-Id: I12331ff2622194e34a44f421f656fbe4db5d3dca
> Reviewed-on: https://skia-review.googlesource.com/65521
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
TBR=mtklein@chromium.org,brianosman@google.com
Change-Id: Ib29800b242bf736b20d61375d3c437c8f4ffdce0
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/65781
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Rewrite things to make that a little clearer.
A red pixel ends up in channel 2, what would naively draw as blue
without a rotation. A green pixel ends up in channel 0, which would
naively draw as red without rotation. A blue pixel ends up in channel
1, which would naively draw as green without this rotation.
So this transformation is:
r -> b
g -> r
b -> g
i.e. rgb_to_brg
Change-Id: I12331ff2622194e34a44f421f656fbe4db5d3dca
Reviewed-on: https://skia-review.googlesource.com/65521
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
I chose the wrong image last time :(
Bug: skia:6176
NOTRY=true
Change-Id: I4b3d9f0d71673bc7ab15a26db52d36cbb494f9c8
Reviewed-on: https://skia-review.googlesource.com/65502
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Bug: skia:7244
Change-Id: Ifacb60b9c61daa8e1d96837363cba807afdc9be4
Reviewed-on: https://skia-review.googlesource.com/65122
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Meanwhile, we also make the bot name more similar to the perf bot.
Bug: skia:
Change-Id: I8b0e6aa2d927aa4a0ce57606345589adb6e920b3
Reviewed-on: https://skia-review.googlesource.com/64082
Reviewed-by: Eric Boren <borenet@google.com>
Reviewed-by: Joe Gregorio <jcgregorio@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
The latest OS is Lollipop, and it was originally released November 2012.
The GPU is not in the top 26 according to UMA stats (I haven't collected
data for lower than 26). We test the same GPU with the
Chromebook_303C12, and bsalomon says "Personally, I'm OK with just
relying on ChromeOS for testing."
No-Try: true
Change-Id: Ib17033153faab9d99613e7d2d069524c9435f65e
Reviewed-on: https://skia-review.googlesource.com/64066
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
No-Try: true
Change-Id: I9ecabb4e2427bf84d81d9f0f3250038e8162bea7
Reviewed-on: https://skia-review.googlesource.com/64220
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Bug: skia:
Change-Id: I16243853adb7722c41bfa6872557c3378e0bb589
Reviewed-on: https://skia-review.googlesource.com/63642
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Bug: skia:
Change-Id: I31c8a625e2b4ed30a8cf0f03035b311ca1c21f88
Reviewed-on: https://skia-review.googlesource.com/63060
Commit-Queue: Yuqian Li <liyuqian@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Now the calmbench bot has the same name schema as the build bots
and we're testing using Clang instead of GCC. In the future, we
may also import some configuration schemas from perf bots.
Bug: skia:
Change-Id: Idd9556cff36b749a6c9139d34f70ac50ca48fbba
Reviewed-on: https://skia-review.googlesource.com/62920
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
These bots use https://clang.llvm.org/docs/SafeStack.html.
This separates the safe (constant size?) parts of the stack like return
address and some local variables apart from the unsafe over- and
underflow prone array uses. These go on the "unsafe stack".
In theory this makes sense on {Linux,Mac}x{Debug,Release},
but let's just start with Linux/Debug.
Change-Id: I9f5cbeb7081e7d9ac8e1298ca0d86880a6085cfa
Reviewed-on: https://skia-review.googlesource.com/62743
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Adds new runs that benchmark just a handful of skps with CCPR.
This will also be Pixel's small debut on skpbench.
Bug: skia:
Change-Id: I7e4c3aeaa083ffe29c275f1c021ee62d177b6172
Reviewed-on: https://skia-review.googlesource.com/62302
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
BUG=skia:7191
Change-Id: I9a7f03fb332dc31e053ae3b3569474a49869c7db
Reviewed-on: https://skia-review.googlesource.com/61364
Reviewed-by: Eric Boren <borenet@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Bug: skia:
Change-Id: I28d28f514b46ad0c30109beba90ae8a1bd8fc4e3
Reviewed-on: https://skia-review.googlesource.com/59961
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
As \r doesn't work on bot output, the new output will be much more concise.
TBR: borenet@google.com
Bug: skia:
Change-Id: I190daeae230ea6e0c4bfebc53c6c5c1fd46c503a
Reviewed-on: https://skia-review.googlesource.com/60840
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
This would allow us to have more test coverage on specific scan converters
which may help us detect some wierd bugs such as crbug.com/774008
Bug: chromium:774008
Change-Id: I9213b11bb47ce48a6eff8da494e1b2699d386ae9
Reviewed-on: https://skia-review.googlesource.com/60540
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
These are hard-coded in update_meta_config.py, which is used to set the
list of trybots in Gerrit.
Bug: skia:
Change-Id: I6e512e4cb59974e27e8954cf5134c70068e716f3
Reviewed-on: https://skia-review.googlesource.com/60521
Reviewed-by: Ravi Mistry <rmistry@google.com>
Commit-Queue: Eric Boren <borenet@google.com>
Bug: skia:
Change-Id: I869776e3d9d47b4a1a11089f729a0b17581eb9f7
Reviewed-on: https://skia-review.googlesource.com/57400
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
The first "sharding" technique we will try is just by test config
(e.g. 8888, gles, etc). Thus, for backwards compatibility,
the default "shard" is All, as in all configs
Bug: skia:
NOTRY=true
Change-Id: Ia02362477a5d97f8f74d688b5f0c4f45fc129375
Reviewed-on: https://skia-review.googlesource.com/59563
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Adds the flag and a disables caching on the CCPR bots.
Bug: skia:
Change-Id: Icb85e77f89634dda1d419dacac5b8a93340723f0
Reviewed-on: https://skia-review.googlesource.com/59740
Reviewed-by: Eric Boren <borenet@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Since we went to retrying the adb commands, the return value
got lost, which was used to read the SKP_VERSIOn, etc.
This fixes it.
Bug: skia:
NOTRY=true
Change-Id: Ifc61ec4cbb13a61c571b2fb89a9c0ed215f8fbd3
Reviewed-on: https://skia-review.googlesource.com/59441
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
No-Try: true
Change-Id: I95a29b1abfd84e51f5a31d74644e5305779f0d15
Reviewed-on: https://skia-review.googlesource.com/57100
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Bug: skia:
NOTRY=true
Change-Id: Ib630d352b6922280ef5772e6843f8f031baeffaf
Reviewed-on: https://skia-review.googlesource.com/59161
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Bug: skia:7160
NOTRY=true
Change-Id: I673d4655b91056954253f69fb4a25f1e190222fa
Reviewed-on: https://skia-review.googlesource.com/59380
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
They pull stuff of using scp, which does not perform well
if a directory does not exist.
Skpbench also needs to be updated to use new adb.
Bug: skia:
NOTRY=true
Change-Id: I1e9f2dbddaab05e1aeb4d71d97f1e6e4bfdd299a
Reviewed-on: https://skia-review.googlesource.com/59081
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
The newer adb acts more like cp when pulling. We used to
create the dm folder on the host machine before pulling.
This used to be fine,
/device/dm_out/dm.json -> /host/dm/dm.json
However, with the update, adb would do
/device/dm_out/dm.json -> /host/dm/dm_out/dm.json
This breaks the upload step. To make this transition
a smooth one, /usr/bin/adb on the RPI is staying the same
(for a while, at least) and /usr/bin/adb.1.0.35 is being added.
That way we can use the new adb on tests after this commit, but
when we backfill, we don't break because of the unexpected folder.
Bug: skia:
Change-Id: Icbed38594fca0e17af1f8d01d75c42ce03f710b9
Reviewed-on: https://skia-review.googlesource.com/58880
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
I'm hoping that recent fixes to timing logic will prevent these problems.
Bug: skia:6534
Change-Id: Ia735e91887164c7a4882d5d3dd67df8c6115bfe9
Reviewed-on: https://skia-review.googlesource.com/54660
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>