skia2/tests/BlurTest.cpp

574 lines
19 KiB
C++

/*
* Copyright 2011 Google Inc.
*
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
#include "SkBlurMask.h"
#include "SkBlurMaskFilter.h"
#include "SkBlurDrawLooper.h"
#include "SkLayerDrawLooper.h"
#include "SkEmbossMaskFilter.h"
#include "SkCanvas.h"
#include "SkMath.h"
#include "SkPaint.h"
#include "Test.h"
#if SK_SUPPORT_GPU
#include "GrContextFactory.h"
#include "SkGpuDevice.h"
#endif
#define WRITE_CSV 0
///////////////////////////////////////////////////////////////////////////////
#define ILLEGAL_MODE ((SkXfermode::Mode)-1)
static const int outset = 100;
static const SkColor bgColor = SK_ColorWHITE;
static const int strokeWidth = 4;
static void create(SkBitmap* bm, const SkIRect& bound) {
bm->allocN32Pixels(bound.width(), bound.height());
}
static void drawBG(SkCanvas* canvas) {
canvas->drawColor(bgColor);
}
struct BlurTest {
void (*addPath)(SkPath*);
int viewLen;
SkIRect views[9];
};
//Path Draw Procs
//Beware that paths themselves my draw differently depending on the clip.
static void draw50x50Rect(SkPath* path) {
path->addRect(0, 0, SkIntToScalar(50), SkIntToScalar(50));
}
//Tests
static BlurTest tests[] = {
{ draw50x50Rect, 3, {
//inner half of blur
{ 0, 0, 50, 50 },
//blur, but no path.
{ 50 + strokeWidth/2, 50 + strokeWidth/2, 100, 100 },
//just an edge
{ 40, strokeWidth, 60, 50 - strokeWidth },
}},
};
/** Assumes that the ref draw was completely inside ref canvas --
implies that everything outside is "bgColor".
Checks that all overlap is the same and that all non-overlap on the
ref is "bgColor".
*/
static bool compare(const SkBitmap& ref, const SkIRect& iref,
const SkBitmap& test, const SkIRect& itest)
{
const int xOff = itest.fLeft - iref.fLeft;
const int yOff = itest.fTop - iref.fTop;
SkAutoLockPixels alpRef(ref);
SkAutoLockPixels alpTest(test);
for (int y = 0; y < test.height(); ++y) {
for (int x = 0; x < test.width(); ++x) {
SkColor testColor = test.getColor(x, y);
int refX = x + xOff;
int refY = y + yOff;
SkColor refColor;
if (refX >= 0 && refX < ref.width() &&
refY >= 0 && refY < ref.height())
{
refColor = ref.getColor(refX, refY);
} else {
refColor = bgColor;
}
if (refColor != testColor) {
return false;
}
}
}
return true;
}
static void test_blur_drawing(skiatest::Reporter* reporter) {
SkPaint paint;
paint.setColor(SK_ColorGRAY);
paint.setStyle(SkPaint::kStroke_Style);
paint.setStrokeWidth(SkIntToScalar(strokeWidth));
SkScalar sigma = SkBlurMask::ConvertRadiusToSigma(SkIntToScalar(5));
for (int style = 0; style <= kLastEnum_SkBlurStyle; ++style) {
SkBlurStyle blurStyle = static_cast<SkBlurStyle>(style);
const uint32_t flagPermutations = SkBlurMaskFilter::kAll_BlurFlag;
for (uint32_t flags = 0; flags < flagPermutations; ++flags) {
SkMaskFilter* filter;
filter = SkBlurMaskFilter::Create(blurStyle, sigma, flags);
paint.setMaskFilter(filter);
filter->unref();
for (size_t test = 0; test < SK_ARRAY_COUNT(tests); ++test) {
SkPath path;
tests[test].addPath(&path);
SkPath strokedPath;
paint.getFillPath(path, &strokedPath);
SkRect refBound = strokedPath.getBounds();
SkIRect iref;
refBound.roundOut(&iref);
iref.inset(-outset, -outset);
SkBitmap refBitmap;
create(&refBitmap, iref);
SkCanvas refCanvas(refBitmap);
refCanvas.translate(SkIntToScalar(-iref.fLeft),
SkIntToScalar(-iref.fTop));
drawBG(&refCanvas);
refCanvas.drawPath(path, paint);
for (int view = 0; view < tests[test].viewLen; ++view) {
SkIRect itest = tests[test].views[view];
SkBitmap testBitmap;
create(&testBitmap, itest);
SkCanvas testCanvas(testBitmap);
testCanvas.translate(SkIntToScalar(-itest.fLeft),
SkIntToScalar(-itest.fTop));
drawBG(&testCanvas);
testCanvas.drawPath(path, paint);
REPORTER_ASSERT(reporter,
compare(refBitmap, iref, testBitmap, itest));
}
}
}
}
}
///////////////////////////////////////////////////////////////////////////////
// Use SkBlurMask::BlurGroundTruth to blur a 'width' x 'height' solid
// white rect. Return the right half of the middle row in 'result'.
static void ground_truth_2d(int width, int height,
SkScalar sigma,
int* result, int resultCount) {
SkMask src, dst;
src.fBounds.set(0, 0, width, height);
src.fFormat = SkMask::kA8_Format;
src.fRowBytes = src.fBounds.width();
src.fImage = SkMask::AllocImage(src.computeTotalImageSize());
memset(src.fImage, 0xff, src.computeTotalImageSize());
dst.fImage = NULL;
SkBlurMask::BlurGroundTruth(sigma, &dst, src, kNormal_SkBlurStyle);
int midX = dst.fBounds.centerX();
int midY = dst.fBounds.centerY();
uint8_t* bytes = dst.getAddr8(midX, midY);
int i;
for (i = 0; i < dst.fBounds.width()-(midX-dst.fBounds.fLeft); ++i) {
if (i < resultCount) {
result[i] = bytes[i];
}
}
for ( ; i < resultCount; ++i) {
result[i] = 0;
}
SkMask::FreeImage(src.fImage);
SkMask::FreeImage(dst.fImage);
}
// Implement a step function that is 255 between min and max; 0 elsewhere.
static int step(int x, SkScalar min, SkScalar max) {
if (min < x && x < max) {
return 255;
}
return 0;
}
// Implement a Gaussian function with 0 mean and std.dev. of 'sigma'.
static float gaussian(int x, SkScalar sigma) {
float k = SK_Scalar1/(sigma * sqrtf(2.0f*SK_ScalarPI));
float exponent = -(x * x) / (2 * sigma * sigma);
return k * expf(exponent);
}
// Perform a brute force convolution of a step function with a Gaussian.
// Return the right half in 'result'
static void brute_force_1d(SkScalar stepMin, SkScalar stepMax,
SkScalar gaussianSigma,
int* result, int resultCount) {
int gaussianRange = SkScalarCeilToInt(10 * gaussianSigma);
for (int i = 0; i < resultCount; ++i) {
SkScalar sum = 0.0f;
for (int j = -gaussianRange; j < gaussianRange; ++j) {
sum += gaussian(j, gaussianSigma) * step(i-j, stepMin, stepMax);
}
result[i] = SkClampMax(SkClampPos(int(sum + 0.5f)), 255);
}
}
static void blur_path(SkCanvas* canvas, const SkPath& path,
SkScalar gaussianSigma) {
SkScalar midX = path.getBounds().centerX();
SkScalar midY = path.getBounds().centerY();
canvas->translate(-midX, -midY);
SkPaint blurPaint;
blurPaint.setColor(SK_ColorWHITE);
SkMaskFilter* filter = SkBlurMaskFilter::Create(kNormal_SkBlurStyle,
gaussianSigma,
SkBlurMaskFilter::kHighQuality_BlurFlag);
blurPaint.setMaskFilter(filter)->unref();
canvas->drawColor(SK_ColorBLACK);
canvas->drawPath(path, blurPaint);
}
// Readback the blurred draw results from the canvas
static void readback(SkCanvas* canvas, int* result, int resultCount) {
SkBitmap readback;
readback.allocN32Pixels(resultCount, 30);
SkIRect readBackRect = { 0, 0, resultCount, 30 };
canvas->readPixels(readBackRect, &readback);
readback.lockPixels();
SkPMColor* pixels = (SkPMColor*) readback.getAddr32(0, 15);
for (int i = 0; i < resultCount; ++i) {
result[i] = SkColorGetR(pixels[i]);
}
}
// Draw a blurred version of the provided path.
// Return the right half of the middle row in 'result'.
static void cpu_blur_path(const SkPath& path, SkScalar gaussianSigma,
int* result, int resultCount) {
SkBitmap bitmap;
bitmap.allocN32Pixels(resultCount, 30);
SkCanvas canvas(bitmap);
blur_path(&canvas, path, gaussianSigma);
readback(&canvas, result, resultCount);
}
#if SK_SUPPORT_GPU
#if 0
// temporary disable; see below for explanation
static bool gpu_blur_path(GrContextFactory* factory, const SkPath& path,
SkScalar gaussianSigma,
int* result, int resultCount) {
GrContext* grContext = factory->get(GrContextFactory::kNative_GLContextType);
if (NULL == grContext) {
return false;
}
GrSurfaceDesc desc;
desc.fConfig = kSkia8888_GrPixelConfig;
desc.fFlags = kRenderTarget_GrSurfaceFlag;
desc.fWidth = resultCount;
desc.fHeight = 30;
desc.fSampleCnt = 0;
SkAutoTUnref<GrTexture> texture(grContext->createTexture(desc, false, NULL, 0));
SkAutoTUnref<SkGpuDevice> device(SkNEW_ARGS(SkGpuDevice, (grContext, texture.get())));
SkCanvas canvas(device.get());
blur_path(&canvas, path, gaussianSigma);
readback(&canvas, result, resultCount);
return true;
}
#endif
#endif
#if WRITE_CSV
static void write_as_csv(const char* label, SkScalar scale, int* data, int count) {
SkDebugf("%s_%.2f,", label, scale);
for (int i = 0; i < count-1; ++i) {
SkDebugf("%d,", data[i]);
}
SkDebugf("%d\n", data[count-1]);
}
#endif
static bool match(int* first, int* second, int count, int tol) {
int delta;
for (int i = 0; i < count; ++i) {
delta = first[i] - second[i];
if (delta > tol || delta < -tol) {
return false;
}
}
return true;
}
// Test out the normal blur style with a wide range of sigmas
static void test_sigma_range(skiatest::Reporter* reporter, GrContextFactory* factory) {
static const int kSize = 100;
// The geometry is offset a smidge to trigger:
// https://code.google.com/p/chromium/issues/detail?id=282418
SkPath rectPath;
rectPath.addRect(0.3f, 0.3f, 100.3f, 100.3f);
SkPoint polyPts[] = {
{ 0.3f, 0.3f },
{ 100.3f, 0.3f },
{ 100.3f, 100.3f },
{ 0.3f, 100.3f },
{ 2.3f, 50.3f } // a little divet to throw off the rect special case
};
SkPath polyPath;
polyPath.addPoly(polyPts, SK_ARRAY_COUNT(polyPts), true);
int rectSpecialCaseResult[kSize];
int generalCaseResult[kSize];
int groundTruthResult[kSize];
int bruteForce1DResult[kSize];
SkScalar sigma = 10.0f;
for (int i = 0; i < 4; ++i, sigma /= 10) {
cpu_blur_path(rectPath, sigma, rectSpecialCaseResult, kSize);
cpu_blur_path(polyPath, sigma, generalCaseResult, kSize);
ground_truth_2d(100, 100, sigma, groundTruthResult, kSize);
brute_force_1d(-50.0f, 50.0f, sigma, bruteForce1DResult, kSize);
REPORTER_ASSERT(reporter, match(rectSpecialCaseResult, bruteForce1DResult, kSize, 5));
REPORTER_ASSERT(reporter, match(generalCaseResult, bruteForce1DResult, kSize, 15));
#if SK_SUPPORT_GPU
#if 0
int gpuResult[kSize];
bool haveGPUResult = gpu_blur_path(factory, rectPath, sigma, gpuResult, kSize);
// Disabling this test for now -- I don't think it's a legit comparison.
// Will continue to investigate this.
if (haveGPUResult) {
// 1 works everywhere but: Ubuntu13 & Nexus4
REPORTER_ASSERT(reporter, match(gpuResult, bruteForce1DResult, kSize, 10));
}
#endif
#endif
REPORTER_ASSERT(reporter, match(groundTruthResult, bruteForce1DResult, kSize, 1));
#if WRITE_CSV
write_as_csv("RectSpecialCase", sigma, rectSpecialCaseResult, kSize);
write_as_csv("GeneralCase", sigma, generalCaseResult, kSize);
#if SK_SUPPORT_GPU
write_as_csv("GPU", sigma, gpuResult, kSize);
#endif
write_as_csv("GroundTruth2D", sigma, groundTruthResult, kSize);
write_as_csv("BruteForce1D", sigma, bruteForce1DResult, kSize);
#endif
}
}
///////////////////////////////////////////////////////////////////////////////////////////
static SkBlurQuality blurMaskFilterFlags_as_quality(uint32_t blurMaskFilterFlags) {
return (blurMaskFilterFlags & SkBlurMaskFilter::kHighQuality_BlurFlag) ?
kHigh_SkBlurQuality : kLow_SkBlurQuality;
}
static uint32_t blurMaskFilterFlags_to_blurDrawLooperFlags(uint32_t bmf) {
const struct {
uint32_t fBlurMaskFilterFlag;
uint32_t fBlurDrawLooperFlag;
} pairs[] = {
{ SkBlurMaskFilter::kIgnoreTransform_BlurFlag, SkBlurDrawLooper::kIgnoreTransform_BlurFlag },
{ SkBlurMaskFilter::kHighQuality_BlurFlag, SkBlurDrawLooper::kHighQuality_BlurFlag },
};
uint32_t bdl = 0;
for (size_t i = 0; i < SK_ARRAY_COUNT(pairs); ++i) {
if (bmf & pairs[i].fBlurMaskFilterFlag) {
bdl |= pairs[i].fBlurDrawLooperFlag;
}
}
return bdl;
}
static void test_blurDrawLooper(skiatest::Reporter* reporter, SkScalar sigma,
SkBlurStyle style, uint32_t blurMaskFilterFlags) {
if (kNormal_SkBlurStyle != style) {
return; // blurdrawlooper only supports normal
}
const SkColor color = 0xFF335577;
const SkScalar dx = 10;
const SkScalar dy = -5;
const SkBlurQuality quality = blurMaskFilterFlags_as_quality(blurMaskFilterFlags);
uint32_t flags = blurMaskFilterFlags_to_blurDrawLooperFlags(blurMaskFilterFlags);
SkAutoTUnref<SkDrawLooper> lp(SkBlurDrawLooper::Create(color, sigma, dx, dy, flags));
const bool expectSuccess = sigma > 0 &&
0 == (flags & SkBlurDrawLooper::kIgnoreTransform_BlurFlag);
if (NULL == lp.get()) {
REPORTER_ASSERT(reporter, sigma <= 0);
} else {
SkDrawLooper::BlurShadowRec rec;
bool success = lp->asABlurShadow(&rec);
REPORTER_ASSERT(reporter, success == expectSuccess);
if (success) {
REPORTER_ASSERT(reporter, rec.fSigma == sigma);
REPORTER_ASSERT(reporter, rec.fOffset.x() == dx);
REPORTER_ASSERT(reporter, rec.fOffset.y() == dy);
REPORTER_ASSERT(reporter, rec.fColor == color);
REPORTER_ASSERT(reporter, rec.fStyle == style);
REPORTER_ASSERT(reporter, rec.fQuality == quality);
}
}
}
static void test_delete_looper(skiatest::Reporter* reporter, SkDrawLooper* lp, SkScalar sigma,
SkBlurStyle style, SkBlurQuality quality, bool expectSuccess) {
SkDrawLooper::BlurShadowRec rec;
bool success = lp->asABlurShadow(&rec);
REPORTER_ASSERT(reporter, success == expectSuccess);
if (success != expectSuccess) {
lp->asABlurShadow(&rec);
}
if (success) {
REPORTER_ASSERT(reporter, rec.fSigma == sigma);
REPORTER_ASSERT(reporter, rec.fStyle == style);
REPORTER_ASSERT(reporter, rec.fQuality == quality);
}
lp->unref();
}
static void make_noop_layer(SkLayerDrawLooper::Builder* builder) {
SkLayerDrawLooper::LayerInfo info;
info.fPaintBits = 0;
info.fColorMode = SkXfermode::kDst_Mode;
builder->addLayer(info);
}
static void make_blur_layer(SkLayerDrawLooper::Builder* builder, SkMaskFilter* mf) {
SkLayerDrawLooper::LayerInfo info;
info.fPaintBits = SkLayerDrawLooper::kMaskFilter_Bit;
info.fColorMode = SkXfermode::kSrc_Mode;
SkPaint* paint = builder->addLayer(info);
paint->setMaskFilter(mf);
}
static void test_layerDrawLooper(skiatest::Reporter* reporter, SkMaskFilter* mf, SkScalar sigma,
SkBlurStyle style, SkBlurQuality quality, bool expectSuccess) {
SkLayerDrawLooper::LayerInfo info;
SkLayerDrawLooper::Builder builder;
// 1 layer is too few
make_noop_layer(&builder);
test_delete_looper(reporter, builder.detachLooper(), sigma, style, quality, false);
// 2 layers is good, but need blur
make_noop_layer(&builder);
make_noop_layer(&builder);
test_delete_looper(reporter, builder.detachLooper(), sigma, style, quality, false);
// 2 layers is just right
make_noop_layer(&builder);
make_blur_layer(&builder, mf);
test_delete_looper(reporter, builder.detachLooper(), sigma, style, quality, expectSuccess);
// 3 layers is too many
make_noop_layer(&builder);
make_blur_layer(&builder, mf);
make_noop_layer(&builder);
test_delete_looper(reporter, builder.detachLooper(), sigma, style, quality, false);
}
static void test_asABlur(skiatest::Reporter* reporter) {
const SkBlurStyle styles[] = {
kNormal_SkBlurStyle, kSolid_SkBlurStyle, kOuter_SkBlurStyle, kInner_SkBlurStyle
};
const SkScalar sigmas[] = {
// values <= 0 should not success for a blur
-1, 0, 0.5f, 2
};
// Test asABlur for SkBlurMaskFilter
//
for (size_t i = 0; i < SK_ARRAY_COUNT(styles); ++i) {
const SkBlurStyle style = (SkBlurStyle)styles[i];
for (size_t j = 0; j < SK_ARRAY_COUNT(sigmas); ++j) {
const SkScalar sigma = sigmas[j];
for (int flags = 0; flags <= SkBlurMaskFilter::kAll_BlurFlag; ++flags) {
const SkBlurQuality quality = blurMaskFilterFlags_as_quality(flags);
SkAutoTUnref<SkMaskFilter> mf(SkBlurMaskFilter::Create(style, sigma, flags));
if (NULL == mf.get()) {
REPORTER_ASSERT(reporter, sigma <= 0);
} else {
REPORTER_ASSERT(reporter, sigma > 0);
SkMaskFilter::BlurRec rec;
bool success = mf->asABlur(&rec);
if (flags & SkBlurMaskFilter::kIgnoreTransform_BlurFlag) {
REPORTER_ASSERT(reporter, !success);
} else {
REPORTER_ASSERT(reporter, success);
REPORTER_ASSERT(reporter, rec.fSigma == sigma);
REPORTER_ASSERT(reporter, rec.fStyle == style);
REPORTER_ASSERT(reporter, rec.fQuality == quality);
}
test_layerDrawLooper(reporter, mf, sigma, style, quality, success);
}
test_blurDrawLooper(reporter, sigma, style, flags);
}
}
}
// Test asABlur for SkEmbossMaskFilter -- should never succeed
//
{
SkEmbossMaskFilter::Light light = {
{ 1, 1, 1 }, 0, 127, 127
};
for (size_t j = 0; j < SK_ARRAY_COUNT(sigmas); ++j) {
const SkScalar sigma = sigmas[j];
SkAutoTUnref<SkMaskFilter> mf(SkEmbossMaskFilter::Create(sigma, light));
if (mf.get()) {
SkMaskFilter::BlurRec rec;
bool success = mf->asABlur(&rec);
REPORTER_ASSERT(reporter, !success);
}
}
}
}
///////////////////////////////////////////////////////////////////////////////////////////
DEF_GPUTEST(Blur, reporter, factory) {
test_blur_drawing(reporter);
test_sigma_range(reporter, factory);
test_asABlur(reporter);
}