v8/test/cctest/cctest.status

571 lines
24 KiB
Plaintext
Raw Normal View History

# Copyright 2011 the V8 project authors. All rights reserved.
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials provided
# with the distribution.
# * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
[
[ALWAYS, {
# All tests prefixed with 'Bug' are expected to fail.
'test-api/Bug*': [FAIL],
'test-serialize/Bug*': [FAIL],
##############################################################################
# BUG(382): Weird test. Can't guarantee that it never times out.
'test-api/ApplyInterruption': [PASS, TIMEOUT],
# These tests always fail. They are here to test test.py. If
# they don't fail then test.py has failed.
'test-serialize/TestThatAlwaysFails': [FAIL],
'test-api/SealHandleScope': [FAIL],
# This test always fails. It tests that LiveEdit causes abort when turned off.
'test-debug/LiveEditDisabled': [FAIL],
# This test always fails. It tests that DisallowJavascriptExecutionScope
# works as intended.
'test-api/DisallowJavascriptExecutionScope': [FAIL],
# TODO(gc): Temporarily disabled in the GC branch.
'test-log/EquivalenceOfLoggingAndTraversal': [PASS, FAIL],
# We do not yet shrink weak maps after they have been emptied by the GC
'test-weakmaps/Shrinking': [FAIL],
'test-weaksets/WeakSet_Shrinking': [FAIL],
# Boot up memory use is bloated in debug mode.
'test-mark-compact/BootUpMemoryUse': [PASS, PASS, ['mode == debug', FAIL]],
# This tests only that the preparser and parser agree, so there is no point in
# running several variants. Note that this still takes ages, because there
# are actually 13 * 38 * 5 * 128 = 316160 individual tests hidden here.
'test-parsing/ParserSync': [PASS, NO_VARIANTS],
# This tests only the type system, no point in running several variants.
'test-hydrogen-types/*': [PASS, NO_VARIANTS],
'test-types/*': [PASS, NO_VARIANTS],
# This tests API threading, no point in running several variants.
'test-api/Threading*': [PASS, NO_VARIANTS],
# BUG(2999). The cpu profiler tests are notoriously flaky.
'test-cpu-profiler/CpuProfileDeepStack': [SKIP],
'test-cpu-profiler/HotDeoptNoFrameEntry': [SKIP],
'test-cpu-profiler/SampleWhenFrameIsNotSetup': [SKIP],
# BUG(3525). Test crashes flakily.
'test-debug/RecursiveBreakpoints': [PASS, FLAKY],
'test-debug/RecursiveBreakpointsGlobal': [PASS, FLAKY],
# BUG(v8:4358). Hangs flakily.
'test-debug/ProcessDebugMessagesThreaded': [SKIP],
# BUG(2340). Preprocessing stack traces is disabled at the moment.
'test-heap/PreprocessStackTrace': [FAIL],
# BUG(4333). Function name inferrer does not work for ES6 clases.
'test-func-name-inference/UpperCaseClass': [FAIL],
'test-func-name-inference/LowerCaseClass': [FAIL],
# BUG(3956). Strong mode is being deprecated. Decide about these tests.
'test-api/StrongModeAccessCheckAllowed': [FAIL],
'test-api/StrongModeAccessCheckBlocked': [FAIL],
##############################################################################
# TurboFan compiler failures.
# Some tests are just too slow to run for now.
'test-heap/IncrementalMarkingStepMakesBigProgressWithLargeObjects': [PASS, NO_VARIANTS],
'test-heap-profiler/ManyLocalsInSharedContext': [PASS, NO_VARIANTS],
'test-serialize/SerializeToplevelLargeCodeObject': [PASS, NO_VARIANTS],
'test-debug/ThreadedDebugging': [PASS, NO_VARIANTS],
# BUG(3742).
'test-mark-compact/MarkCompactCollector': [PASS, ['arch==arm', NO_VARIANTS]],
# TODO(mstarzinger): The rewriter is not being called when top-level code is
# optimized and hence scripts don't "return" the correct value. Fix this.
'test-compiler/CompileFunctionInContext*': [PASS, NO_VARIANTS],
# TODO(bmeurer): TurboFan embeds strong references to all kinds of objects
# via deoptimization data (Crankshaft also does this, but lack proper test
# coverage).
'test-heap/ObjectsInOptimizedCodeAreWeak': [PASS, NO_VARIANTS],
# TurboFan doesn't support allocation sites currently.
'test-heap/EnsureAllocationSiteDependentCodesProcessed': [PASS, NO_VARIANTS],
'test-heap/OptimizedPretenuringAllocationFolding': [PASS, NO_VARIANTS],
'test-heap/OptimizedPretenuringdoubleArrayLiterals': [PASS, NO_VARIANTS],
'test-heap/OptimizedPretenuringDoubleArrayProperties': [PASS, NO_VARIANTS],
'test-heap/OptimizedPretenuringMixedInObjectProperties': [PASS, NO_VARIANTS],
'test-heap/OptimizedPretenuringNestedDoubleLiterals': [PASS, NO_VARIANTS],
'test-heap/OptimizedPretenuringNestedMixedArrayLiterals': [PASS, NO_VARIANTS],
'test-heap/OptimizedPretenuringNestedObjectLiterals': [PASS, NO_VARIANTS],
'test-heap/OptimizedPretenuringObjectArrayLiterals': [PASS, NO_VARIANTS],
# TurboFan cpu profiler result is different.
'test-cpu-profiler/CollectDeoptEvents': [PASS, NO_VARIANTS],
'test-cpu-profiler/DeoptAtFirstLevelInlinedSource': [PASS, NO_VARIANTS],
'test-cpu-profiler/DeoptAtSecondLevelInlinedSource': [PASS, NO_VARIANTS],
'test-cpu-profiler/DeoptUntrackedFunction': [PASS, NO_VARIANTS],
############################################################################
# Slow tests.
'test-api/Threading1': [PASS, ['mode == debug', SLOW]],
'test-api/Threading2': [PASS, ['mode == debug', SLOW]],
'test-api/Threading3': [PASS, ['mode == debug', SLOW]],
'test-api/Threading4': [PASS, ['mode == debug', SLOW]],
'test-debug/CallFunctionInDebugger': [PASS, ['mode == debug', SLOW]],
'test-strings/StringOOM*': [PASS, ['mode == debug', SKIP]],
# TODO(machenbach, mvstanton): Flaky in debug on all platforms.
'test-lockers/LockerUnlocker': [PASS, ['mode == debug', FLAKY]],
}], # ALWAYS
##############################################################################
['arch == arm64', {
'test-cpu-profiler/CollectDeoptEvents': [PASS, FAIL],
'test-api/Bug618': [PASS],
# BUG(v8:3385).
'test-serialize/DeserializeFromSecondSerialization': [PASS, FAIL],
'test-serialize/DeserializeFromSecondSerializationAndRunScript2': [PASS, FAIL],
# BUG(v8:3154).
'test-heap/ReleaseOverReservedPages': [PASS, FAIL],
# BUG(v8:3155).
'test-strings/OneByteArrayJoin': [PASS, ['mode == debug', FAIL]],
# BUG(v8:3247).
'test-mark-compact/NoPromotion': [SKIP],
# BUG(v8:3446).
'test-mark-compact/Promotion': [PASS, FAIL],
# BUG(v8:3434).
' test-api/LoadICFastApi_DirectCall_GCMoveStubWithProfiler': [SKIP],
# BUG(v8:4795).
'test-run-wasm-js/Run_JSSelectAlign_0': [SKIP],
'test-run-wasm-js/Run_JSSelectAlign_2': [SKIP],
'test-run-wasm-js/Run_JSSelectAlign_4': [SKIP],
'test-run-wasm-js/Run_JSSelect_0': [SKIP],
'test-run-wasm-js/Run_JSSelect_1': [SKIP],
'test-run-wasm-js/Run_JSSelect_2': [SKIP],
'test-run-wasm-js/Run_JSSelect_3': [SKIP],
'test-run-wasm-js/Run_JSSelect_4': [SKIP],
'test-run-wasm-js/Run_JSSelect_5': [SKIP],
'test-run-wasm-js/Run_JSSelect_6': [SKIP],
}], # 'arch == arm64'
['arch == arm64 and simulator_run == True', {
# Pass but take too long with the simulator.
'test-api/ExternalArrays': [PASS, TIMEOUT],
'test-api/Threading1': [SKIP],
'test-api/Threading2': [SKIP],
}], # 'arch == arm64 and simulator_run == True'
['arch == arm64 and mode == debug and simulator_run == True', {
# Pass but take too long with the simulator in debug mode.
'test-api/ExternalDoubleArray': [SKIP],
'test-api/ExternalFloat32Array': [SKIP],
'test-api/ExternalFloat64Array': [SKIP],
'test-api/ExternalFloatArray': [SKIP],
'test-api/Float32Array': [SKIP],
'test-api/Float64Array': [SKIP],
}], # 'arch == arm64 and mode == debug and simulator_run == True'
##############################################################################
['asan == True', {
# Skip tests not suitable for ASAN.
'test-assembler-x64/AssemblerX64XchglOperations': [SKIP],
}], # 'asan == True'
##############################################################################
['msan == True', {
# ICU upstream issues.
'test-strings/CountBreakIterator': [SKIP],
# Slow tests.
'test-api/Threading1': [PASS, SLOW],
'test-api/Threading2': [PASS, SLOW],
'test-api/Threading3': [PASS, SLOW],
'test-api/Threading4': [PASS, SLOW],
}], # 'msan == True'
##############################################################################
['no_snap == True', {
# Slow tests.
'test-api/ExternalWrap': [PASS, SLOW],
'test-api/FastReturnValues*': [PASS, SLOW],
'test-decls/CrossScriptReferences_Simple2': [PASS, SLOW],
}], # 'no_snap == True'
##############################################################################
# TODO(machenbach): Fix application of '*'. Nosnap windows needs a separate
# section to not overwrite the expectations for TestThatAlwaysFails.
['no_snap == True and system == windows', {
# Windows doesn't support nosnap mode.
'test-serialize/*': [SKIP],
}], # 'no_snap == True and system == windows'
##############################################################################
['system == windows', {
# BUG(3331). Fails on windows.
'test-heap/NoWeakHashTableLeakWithIncrementalMarking': [SKIP],
# BUG(v8:4573).
'test-api/MultipleIsolatesOnIndividualThreads': [PASS, NO_VARIANTS],
# BUG(v8:4642).
'test-lockers/LockAndUnlockDifferentIsolates': [PASS, NO_VARIANTS],
}], # 'system == windows'
##############################################################################
['system == macos', {
# BUG(3125).
'test-debug/DebugGetLoadedScripts': [PASS, FLAKY],
'test-debug/DebugStepLinear': [PASS, FLAKY],
'test-debug/DebuggerClearMessageHandler': [PASS, FLAKY],
}], # 'system == macos'
##############################################################################
['byteorder == big', {
# TODO(mips-team): Fix Wasm for big-endian.
'test-run-wasm-module/Run_WasmModule_CallAdd': [SKIP],
'test-run-wasm-module/Run_WasmModule_CallAdd_rev': [SKIP],
'test-run-wasm-module/Run_WasmModule_CallMain_recursive': [SKIP],
'test-run-wasm-module/Run_WasmModule_ReadLoadedDataSegment': [SKIP],
'test-run-wasm-module/Run_WasmModule_Return114': [SKIP],
'test-run-wasm-module/Run_WasmModule_CheckMemoryIsZero': [SKIP],
'test-run-wasm-module/Run_WasmModule_Global': [SKIP],
'test-run-wasm/Run_WasmInt32*': [SKIP],
'test-run-wasm/Run_Wasm_TableSwitch*': [SKIP],
'test-run-wasm/Run_Wasm_StoreMemI32_offset': [SKIP],
'test-run-wasm/Run_Wasm_Int32LoadInt16_*': [SKIP],
'test-run-wasm/Run_WasmMixedGlobals': [SKIP],
'test-run-wasm/Run_WasmCall*': [SKIP],
'test-run-wasm/Run_WasmMixedCall_*': [SKIP],
'test-run-wasm/Run_WasmInt64*': [SKIP],
'test-run-wasm/Run_Wasm_LoadStoreI64_sx': [SKIP],
'test-run-wasm/Run_WASM_Int64DivS_byzero_const': [SKIP],
'test-run-wasm/Run_TestI64WasmRunner': [SKIP],
'test-run-wasm-js/Run_JSSelect_1': [SKIP],
'test-run-wasm-js/Run_JSSelect_2': [SKIP],
'test-run-wasm-js/Run_JSSelect_3': [SKIP],
'test-run-wasm-js/Run_JSSelect_4': [SKIP],
'test-run-wasm-js/Run_JSSelect_5': [SKIP],
'test-run-wasm-js/Run_JSSelect_6': [SKIP],
'test-run-wasm-64/Run_WasmI64*': [SKIP],
}], # 'byteorder == big'
##############################################################################
['arch == arm', {
'test-cpu-profiler/CollectDeoptEvents': [PASS, FAIL],
# BUG(355): Test crashes on ARM.
'test-log/ProfLazyMode': [SKIP],
# BUG(1075): Unresolved crashes.
'test-serialize/Deserialize': [SKIP],
'test-serialize/DeserializeFromSecondSerializationAndRunScript2': [SKIP],
'test-serialize/DeserializeAndRunScript2': [SKIP],
'test-serialize/DeserializeFromSecondSerialization': [SKIP],
############################################################################
# Slow tests.
'test-api/Threading1': [PASS, SLOW],
'test-api/Threading2': [PASS, SLOW],
'test-api/Threading3': [PASS, SLOW],
'test-api/Threading4': [PASS, SLOW],
# Crashes due to OOM in simulator.
'test-types/Distributivity1': [PASS, FLAKY],
'test-types/Distributivity2': [PASS, FLAKY],
}], # 'arch == arm'
##############################################################################
['arch == mipsel or arch == mips', {
'test-cpu-profiler/CollectDeoptEvents': [PASS, FAIL],
# TODO(mips-team): Improve code-size on large RegExp's.
'test-heap/TestSizeOfRegExpCode': [SKIP],
# BUG(1075): Unresolved crashes on MIPS also.
'test-serialize/Deserialize': [SKIP],
'test-serialize/DeserializeFromSecondSerializationAndRunScript2': [SKIP],
'test-serialize/DeserializeAndRunScript2': [SKIP],
'test-serialize/DeserializeFromSecondSerialization': [SKIP],
}], # 'arch == mipsel or arch == mips'
##############################################################################
['arch == mips', {
# Too slow with TF.
'test-api/ExternalArrays': [PASS, NO_VARIANTS],
# TODO(mips-team): Currently fails on mips board.
'test-parsing/TooManyArguments': [SKIP],
'test-api/Threading3': [SKIP],
}], # 'arch == mips'
##############################################################################
['arch == mips64el or arch == mips64', {
'test-cpu-profiler/CollectDeoptEvents': [PASS, FAIL],
# BUG(v8:3154).
'test-heap/ReleaseOverReservedPages': [PASS, FAIL],
# TODO(mips-team): Improve code-size on large RegExp's.
'test-heap/TestSizeOfRegExpCode': [SKIP],
# BUG(1075): Unresolved crashes on MIPS also.
'test-serialize/Deserialize': [SKIP],
'test-serialize/DeserializeFromSecondSerializationAndRunScript2': [SKIP],
'test-serialize/DeserializeAndRunScript2': [SKIP],
'test-serialize/DeserializeFromSecondSerialization': [SKIP],
}], # 'arch == mips64el or arch == mips64'
##############################################################################
['arch == x87', {
'test-run-machops/RunFloat64InsertLowWord32': [SKIP],
'test-run-native-calls/MixedParams_0': [SKIP],
'test-run-native-calls/MixedParams_1': [SKIP],
'test-run-native-calls/MixedParams_2': [SKIP],
'test-run-native-calls/MixedParams_3': [SKIP],
'test-run-machops/RunFloat64MulAndFloat64Add1': [SKIP],
'test-run-machops/RunFloat64MulAndFloat64Add2': [SKIP],
'test-run-machops/RunFloat64MulAndFloat64Sub1': [SKIP],
'test-run-machops/RunFloat64MulAndFloat64Sub2': [SKIP],
X87: Disable the test-run-profiler/Inlining test case for X87. The CL #34376 (https://codereview.chromium.org/1740073002 ) added the Inlining test case and X87 failed at it. The reason is: For TEST(Inlining) test case, when level3 function is inlined, the key optimized crankshaft code will like below code normally: ............ 0x21d53b7f 63 ff571b call [edi+0x1b] <----------- should call action() here ;;; <@32,#27> lazy-bailout ;;; <@36,#31> ---- B3 ---- ;;; <@37,#31> gap 0x21d53b82 66 89c1 mov ecx,eax <----------- Both the inlined function’s pc_offset from DeoptimizationInputData and the pc_offset from sample stack points to here, the same pc address ............ So the TEST(Inlining) test case can get the expected inlined code entry and pass.. In fact, the exact code sequence should like the following in crankshaft: ............ 0x21d53b7f 63 ff571b call [edi+0x1b] <----------- should call action() 0xxxxxxxxx xxxx GenerateBodyInstructionPost() <----------- the pc_offset from sample stack points to here ;;; <@32,#27> lazy-bailout ;;; <@36,#31> ---- B3 ---- ;;; <@37,#31> gap 0x21d53b82 66 89c1 mov ecx,eax <----------- the inlined function’s pc_offset from DeoptimizationInputData points to here. ............ For most of architectures in V8, the GenerateBodyInstructionPost() is empty, so both the inlined function’s pc_offset from DeoptimizationInputData and the pc_offset from sample stack points to the same pc address . But if some architecture has special requirement and need to put some instruction after call instruction, the GenerateBodyInstructionPost() will do that work and generate instructions, the inlined function’s pc_offset from DeoptimizationInputData and The pc_offset from sample stack will points to the different pc address, the TEST(Inlining) test case can’t get the expected inlined code entry and failed. For all current architectures in v8, only x87 have this requirement. After communicated with Alexei Filippov <alph@chromium.org> in E-mail, we decided to disable the Inlining test case for x87 now and try to find a solution. BUG= Review URL: https://codereview.chromium.org/1766263002 Cr-Commit-Position: refs/heads/master@{#34544}
2016-03-07 14:56:36 +00:00
'test-cpu-profiler/Inlining': [SKIP],
}], # 'arch == x87'
##############################################################################
['arch == android_arm or arch == android_ia32', {
# Tests crash as there is no /tmp directory in Android.
'test-log/LogAccessorCallbacks': [SKIP],
'test-log/LogCallbacks': [SKIP],
'test-log/ProfLazyMode': [SKIP],
}], # 'arch == android_arm or arch == android_ia32'
##############################################################################
['arch == nacl_ia32 or arch == nacl_x64', {
# NaCl builds have problems with threaded tests since Pepper_28.
# V8 Issue 2786
'test-api/Threading1': [SKIP],
'test-lockers/ExtensionsRegistration': [SKIP],
# These tests fail as there is no /tmp directory in Native Client.
'test-log/LogAccessorCallbacks': [SKIP],
'test-log/LogCallbacks': [SKIP],
'test-log/ProfLazyMode': [SKIP],
# Native Client doesn't support sockets.
'test-debug/DebuggerAgent': [SKIP],
'test-debug/DebuggerAgentProtocolOverflowHeader': [SKIP],
'test-socket/Socket': [SKIP],
# Profiling doesn't work on Native Client.
'test-cpu-profiler/*': [SKIP],
# Fails since 16322 (new test).
'test-code-stubs-arm/ConvertDToI': [SKIP],
# BUG(2998).
'test-macro-assembler-arm/LoadAndStoreWithRepresentation': [SKIP],
# BUG(3150).
'test-api/PreCompileInvalidPreparseDataError': [SKIP],
'test-types/Convert' : [SKIP],
'test-symbols/Create' : [SKIP],
'test-parsing/ParserSync' : [SKIP],
'test-parsing/ErrorsEvalAndArguments' : [SKIP],
'test-parsing/ErrorsFutureStrictReservedWords' : [SKIP],
'test-parsing/ErrorsReservedWords' : [SKIP],
'test-parsing/ErrorsYieldStrict' : [SKIP],
'test-parsing/ErrorsNotAnIdentifierName' : [SKIP],
'test-parsing/FunctionDeclaresItselfStrict' : [SKIP],
'test-parsing/ErrorsObjectLiteralChecking' : [SKIP],
'test-parsing/InvalidLeftHandSide' : [SKIP],
'test-heap/GarbageCollection' : [SKIP],
'test-heap/GlobalHandles' : [SKIP],
'test-heap/WeakGlobalHandlesScavenge' : [SKIP],
'test-heap/DeleteWeakGlobalHandle' : [SKIP],
'test-heap/GrowAndShrinkNewSpace' : [SKIP],
'test-heap/OptimizedAllocationAlwaysInNewSpace' : [SKIP],
'test-heap/OptimizedPretenuringAllocationFolding' : [SKIP],
'test-heap/OptimizedPretenuringObjectArrayLiterals' : [SKIP],
'test-heap/OptimizedPretenuringAllocationFoldingBlocks' : [SKIP],
'test-heap/OptimizedPretenuringMixedInObjectProperties' : [SKIP],
'test-heap/OptimizedPretenuringDoubleArrayProperties' : [SKIP],
'test-heap/OptimizedPretenuringdoubleArrayLiterals' : [SKIP],
'test-heap/OptimizedPretenuringNestedMixedArrayLiterals' : [SKIP],
'test-heap/OptimizedPretenuringNestedObjectLiterals' : [SKIP],
'test-heap/OptimizedPretenuringNestedDoubleLiterals' : [SKIP],
'test-heap/Regress169928' : [SKIP],
'test-decls/Unknown' : [SKIP],
'test-decls/Present' : [SKIP],
'test-decls/Absent' : [SKIP],
'test-decls/Appearing' : [SKIP],
'test-decls/Reappearing' : [SKIP],
'test-decls/ExistsInPrototype' : [SKIP],
'test-decls/AbsentInPrototype' : [SKIP],
'test-decls/ExistsInHiddenPrototype' : [SKIP],
'test-debug/ConditionalScriptBreakPoint' : [SKIP],
'test-debug/DebugEvaluate' : [SKIP],
'test-debug/ConditionalBreakpointWithCodeGenerationDisallowed' : [SKIP],
'test-debug/DebugEvaluateWithCodeGenerationDisallowed' : [SKIP],
'test-debug/DebugBreak' : [SKIP],
'test-debug/ThreadedDebugging' : [SKIP],
'test-debug/RecursiveBreakpoints' : [SKIP],
'test-dictionary/HashMap' : [SKIP],
'test-debug/Backtrace' : [SKIP],
'test-debug/DebugBreakLoop' : [SKIP],
'test-constantpool/ConstantPool' : [SKIP],
'test-compiler/GetScriptLineNumber' : [SKIP],
'test-api/ScriptMakingExternalString' : [SKIP],
'test-api/ScriptMakingExternalOneByteString' : [SKIP],
'test-api/MakingExternalStringConditions' : [SKIP],
'test-api/MakingExternalOneByteStringConditions' : [SKIP],
'test-api/MakingExternalUnalignedOneByteString' : [SKIP],
'test-api/IndexedInterceptorUnboxedDoubleWithIndexedAccessor' : [SKIP],
'test-api/IndependentWeakHandle' : [SKIP],
'test-api/GCFromWeakCallbacks' : [SKIP],
'test-api/IndependentHandleRevival' : [SKIP],
'test-api/StringWrite' : [SKIP],
'test-api/Threading3' : [SKIP],
'test-api/Threading4' : [SKIP],
'test-api/Threading2' : [SKIP],
'test-api/FixedFloat32Array' : [SKIP],
'test-api/FixedFloat64Array' : [SKIP],
'test-api/ExternalFloat32Array' : [SKIP],
'test-api/ExternalFloat64Array' : [SKIP],
'test-api/ExternalArrays' : [SKIP],
'test-api/Float32Array' : [SKIP],
'test-api/Float64Array' : [SKIP],
'test-api/Regress2333' : [SKIP],
'test-alloc/StressHandles' : [SKIP],
'test-alloc/StressJS' : [SKIP],
'test-accessors/HandleScopePop' : [SKIP],
'test-accessors/Gc' : [SKIP],
}], # 'arch == nacl_ia32 or arch == nacl_x64'
##############################################################################
['system == aix and arch == ppc64', {
# BUG 2857
'test-log/EquivalenceOfLoggingAndTraversal' : [SKIP],
}], # 'system == aix and arch == ppc64'
##############################################################################
['system == aix or (arch == ppc64 and byteorder == big)', {
# TODO(ppc): Fix for platforms with function desciptors.
'test-run-machops/RunComputedCodeObject' : [SKIP],
'test-run-wasm-module/Run_WasmModule_Return114' : [SKIP],
'test-run-wasm-module/Run_WasmModule_CallAdd' : [SKIP],
'test-run-wasm-module/Run_WasmModule_CallMain_recursive' : [SKIP],
}], # 'system == aix or (arch == ppc64 and byteorder == big)'
Contribution of PowerPC port (continuation of 422063005) - currency Contribution of PowerPC port (continuation of 422063005, 817143002, 866843003, and 901083004. This patch updates the ppc directories to make them current with changes in common code, removes the optimization to use the ool constant pool, and excludes tests that don't pass under the ppc simulator given a 240s timeout. Subsequent patches will cover: - remaining optimizations for PPC - remaining AIX changes not resolved by 4.8 compiler (4.8 is only recently available for AIX) - incremental updates required to ppc directories due to platform specific changes made in google repos while we complete the above steps. modified: src/compiler/ppc/code-generator-ppc.cc modified: src/ic/ppc/handler-compiler-ppc.cc modified: src/ppc/assembler-ppc-inl.h modified: src/ppc/assembler-ppc.cc modified: src/ppc/assembler-ppc.h modified: src/ppc/builtins-ppc.cc modified: src/ppc/code-stubs-ppc.cc modified: src/ppc/debug-ppc.cc modified: src/ppc/deoptimizer-ppc.cc modified: src/ppc/frames-ppc.cc modified: src/ppc/frames-ppc.h modified: src/ppc/full-codegen-ppc.cc modified: src/ppc/lithium-codegen-ppc.cc modified: src/ppc/lithium-ppc.cc modified: src/ppc/lithium-ppc.h modified: src/ppc/macro-assembler-ppc.cc modified: src/ppc/macro-assembler-ppc.h modified: test/cctest/cctest.status modified: test/mjsunit/mjsunit.status R=danno@chromium.org, svenpanne@chromium.org BUG= Review URL: https://codereview.chromium.org/965823002 Cr-Commit-Position: refs/heads/master@{#26951}
2015-03-03 07:04:41 +00:00
##############################################################################
['arch == ppc and simulator_run == True or arch == ppc64 and simulator_run == True', {
# Pass but take too long with the simulator.
'test-api/Threading1': [PASS, SLOW],
'test-api/Threading2': [PASS, SLOW],
'test-api/ExternalArrays': [PASS, SLOW],
Contribution of PowerPC port (continuation of 422063005) - currency Contribution of PowerPC port (continuation of 422063005, 817143002, 866843003, and 901083004. This patch updates the ppc directories to make them current with changes in common code, removes the optimization to use the ool constant pool, and excludes tests that don't pass under the ppc simulator given a 240s timeout. Subsequent patches will cover: - remaining optimizations for PPC - remaining AIX changes not resolved by 4.8 compiler (4.8 is only recently available for AIX) - incremental updates required to ppc directories due to platform specific changes made in google repos while we complete the above steps. modified: src/compiler/ppc/code-generator-ppc.cc modified: src/ic/ppc/handler-compiler-ppc.cc modified: src/ppc/assembler-ppc-inl.h modified: src/ppc/assembler-ppc.cc modified: src/ppc/assembler-ppc.h modified: src/ppc/builtins-ppc.cc modified: src/ppc/code-stubs-ppc.cc modified: src/ppc/debug-ppc.cc modified: src/ppc/deoptimizer-ppc.cc modified: src/ppc/frames-ppc.cc modified: src/ppc/frames-ppc.h modified: src/ppc/full-codegen-ppc.cc modified: src/ppc/lithium-codegen-ppc.cc modified: src/ppc/lithium-ppc.cc modified: src/ppc/lithium-ppc.h modified: src/ppc/macro-assembler-ppc.cc modified: src/ppc/macro-assembler-ppc.h modified: test/cctest/cctest.status modified: test/mjsunit/mjsunit.status R=danno@chromium.org, svenpanne@chromium.org BUG= Review URL: https://codereview.chromium.org/965823002 Cr-Commit-Position: refs/heads/master@{#26951}
2015-03-03 07:04:41 +00:00
}], # 'arch == ppc64 and simulator_run == True'
##############################################################################
['ignition == True', {
# TODO(yangguo,4690): Test failures in debugger tests.
'test-debug/DebugStepNamedLoadLoop': [FAIL],
'test-debug/DebugStepForIn': [FAIL],
'test-debug/DebugStepDoWhile': [FAIL],
'test-debug/DebugConditional': [FAIL],
'test-debug/DebugStepForContinue': [FAIL],
'test-debug/DebugStepKeyedStoreLoop': [FAIL],
'test-debug/DebugStepForBreak': [FAIL],
'test-debug/DebugStepKeyedLoadLoop': [FAIL],
'test-debug/DebugStepNamedStoreLoop': [FAIL],
# BUG(4333). Function name inferrer does not work for ES6 clases.
'test-func-name-inference/UpperCaseClass': [TIMEOUT],
'test-func-name-inference/LowerCaseClass': [TIMEOUT],
# TODO(rmcilroy,4681): Requires support for generators.
'test-inobject-slack-tracking/JSGeneratorObjectBasic': [FAIL],
'test-inobject-slack-tracking/JSGeneratorObjectBasicNoInlineNew': [FAIL],
'test-api/IsGeneratorFunctionOrObject': [FAIL],
# TODO(rmcilroy,4680): The function_data field should be a BytecodeArray on interpreter entry
'test-api/SetFunctionEntryHook': [FAIL],
# TODO(rmcilroy,4680): Check failed: !function->shared()->is_compiled() || function->IsOptimized().
'test-heap/TestCodeFlushingPreAged': [FAIL],
'test-heap/TestCodeFlushingIncrementalScavenge': [FAIL],
'test-heap/TestCodeFlushing': [FAIL],
'test-heap/TestCodeFlushingIncremental': [FAIL],
'test-heap/TestCodeFlushingIncrementalAbort': [PASS, ['mode == debug or dcheck_always_on == True', FAIL]],
# TODO(rmcilroy,4689): Stack trace line number failures.
'test-run-jsexceptions/ThrowMessagePosition': [FAIL],
'test-api/TryCatchMixedNesting': [FAIL],
# TODO(rmcilroy,4766): Requires BytecodeGraphBuilder to track source position
# on nodes (behind --turbo_source_positions flag).
'test-cpu-profiler/TickLinesOptimized': [FAIL],
# TODO(rmcilroy,4680): Test assert errors.
'test-feedback-vector/VectorCallICStates': [FAIL],
'test-compiler/FeedbackVectorPreservedAcrossRecompiles': [FAIL],
'test-api/PromiseRejectCallback': [FAIL],
'test-heap/WeakFunctionInConstructor': [FAIL],
'test-heap/Regress169209': [FAIL],
'test-heap/IncrementalMarkingClearsMonomorphicConstructor': [FAIL],
'test-heap/IncrementalMarkingPreservesMonomorphicConstructor': [FAIL],
'test-heap/IncrementalMarkingPreservesMonomorphicCallIC': [FAIL],
'test-heap/CompilationCacheCachingBehavior': [FAIL],
'test-heap/CellsInOptimizedCodeAreWeak': [FAIL],
'test-run-inlining/InlineTwice': [FAIL],
'test-serialize/SerializeInternalReference': [FAIL, ['arch == arm or arch == arm64', PASS]],
}], # ignition == True
]