v8/Makefile

486 lines
16 KiB
Makefile
Raw Normal View History

# Copyright 2012 the V8 project authors. All rights reserved.
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials provided
# with the distribution.
# * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# Variable default definitions. Override them by exporting them in your shell.
CXX ?= g++
LINK ?= g++
OUTDIR ?= out
TESTJOBS ?=
GYPFLAGS ?=
TESTFLAGS ?=
ANDROID_NDK_ROOT ?=
ANDROID_NDK_HOST_ARCH ?=
ANDROID_TOOLCHAIN ?=
ANDROID_V8 ?= /data/local/tmp/v8
NACL_SDK_ROOT ?=
# Special build flags. Use them like this: "make library=shared"
# library=shared || component=shared_library
ifeq ($(library), shared)
GYPFLAGS += -Dcomponent=shared_library
endif
ifdef component
GYPFLAGS += -Dcomponent=$(component)
endif
# console=readline
ifdef console
GYPFLAGS += -Dconsole=$(console)
endif
# disassembler=on
ifeq ($(disassembler), on)
GYPFLAGS += -Dv8_enable_disassembler=1
endif
# objectprint=on
ifeq ($(objectprint), on)
GYPFLAGS += -Dv8_object_print=1
endif
# verifyheap=on
ifeq ($(verifyheap), on)
GYPFLAGS += -Dv8_enable_verify_heap=1
endif
# backtrace=off
ifeq ($(backtrace), off)
GYPFLAGS += -Dv8_enable_backtrace=0
else
GYPFLAGS += -Dv8_enable_backtrace=1
endif
# snapshot=off
ifeq ($(snapshot), off)
GYPFLAGS += -Dv8_use_snapshot='false'
endif
# extrachecks=on/off
ifeq ($(extrachecks), on)
GYPFLAGS += -Dv8_enable_extra_checks=1 -Dv8_enable_handle_zapping=1
endif
ifeq ($(extrachecks), off)
GYPFLAGS += -Dv8_enable_extra_checks=0 -Dv8_enable_handle_zapping=0
endif
# gdbjit=on/off
ifeq ($(gdbjit), on)
GYPFLAGS += -Dv8_enable_gdbjit=1
endif
ifeq ($(gdbjit), off)
GYPFLAGS += -Dv8_enable_gdbjit=0
endif
# vtunejit=on
ifeq ($(vtunejit), on)
GYPFLAGS += -Dv8_enable_vtunejit=1
endif
# optdebug=on
ifeq ($(optdebug), on)
GYPFLAGS += -Dv8_optimized_debug=2
endif
# debuggersupport=off
ifeq ($(debuggersupport), off)
GYPFLAGS += -Dv8_enable_debugger_support=0
endif
# unalignedaccess=on
ifeq ($(unalignedaccess), on)
GYPFLAGS += -Dv8_can_use_unaligned_accesses=true
endif
# randomseed=12345, disable random seed via randomseed=0
ifdef randomseed
GYPFLAGS += -Dv8_random_seed=$(randomseed)
endif
# soname_version=1.2.3
ifdef soname_version
GYPFLAGS += -Dsoname_version=$(soname_version)
endif
# werror=no
ifeq ($(werror), no)
GYPFLAGS += -Dwerror=''
endif
# presubmit=no
ifeq ($(presubmit), no)
TESTFLAGS += --no-presubmit
endif
# strictaliasing=off (workaround for GCC-4.5)
ifeq ($(strictaliasing), off)
GYPFLAGS += -Dv8_no_strict_aliasing=1
endif
# regexp=interpreted
ifeq ($(regexp), interpreted)
GYPFLAGS += -Dv8_interpreted_regexp=1
endif
# i18nsupport=off
ifeq ($(i18nsupport), off)
GYPFLAGS += -Dv8_enable_i18n_support=0
TESTFLAGS += --noi18n
endif
# deprecation_warnings=on
ifeq ($(deprecationwarnings), on)
GYPFLAGS += -Dv8_deprecation_warnings=1
endif
# asan=/path/to/clang++
ifneq ($(strip $(asan)),)
GYPFLAGS += -Dasan=1
export CXX=$(asan)
export CXX_host=$(asan)
export LINK=$(asan)
export ASAN_SYMBOLIZER_PATH="$(dir $(asan))llvm-symbolizer"
endif
# arm specific flags.
# arm_version=<number | "default">
ifneq ($(strip $(arm_version)),)
GYPFLAGS += -Darm_version=$(arm_version)
else
# Deprecated (use arm_version instead): armv7=false/true
ifeq ($(armv7), false)
GYPFLAGS += -Darm_version=6
else
ifeq ($(armv7), true)
GYPFLAGS += -Darm_version=7
endif
endif
endif
# vfp2=off. Deprecated, use armfpu=
# vfp3=off. Deprecated, use armfpu=
ifeq ($(vfp3), off)
GYPFLAGS += -Darm_fpu=vfp
endif
# hardfp=on/off. Deprecated, use armfloatabi
ifeq ($(hardfp),on)
GYPFLAGS += -Darm_float_abi=hard
else
ifeq ($(hardfp),off)
GYPFLAGS += -Darm_float_abi=softfp
endif
endif
# armneon=on/off
ifeq ($(armneon), on)
GYPFLAGS += -Darm_neon=1
endif
# fpu: armfpu=xxx
# xxx: vfp, vfpv3-d16, vfpv3, neon.
ifeq ($(armfpu),)
ifneq ($(vfp3), off)
GYPFLAGS += -Darm_fpu=default
endif
else
GYPFLAGS += -Darm_fpu=$(armfpu)
endif
# float abi: armfloatabi=softfp/hard
ifeq ($(armfloatabi),)
ifeq ($(hardfp),)
GYPFLAGS += -Darm_float_abi=default
endif
else
GYPFLAGS += -Darm_float_abi=$(armfloatabi)
endif
# armthumb=on/off
ifeq ($(armthumb), off)
GYPFLAGS += -Darm_thumb=0
else
ifeq ($(armthumb), on)
GYPFLAGS += -Darm_thumb=1
endif
endif
# armtest=on
# With this flag set, by default v8 will only use features implied
# by the compiler (no probe). This is done by modifying the default
# values of enable_armv7, enable_vfp2, enable_vfp3 and enable_32dregs.
# Modifying these flags when launching v8 will enable the probing for
# the specified values.
# When using the simulator, this flag is implied.
ifeq ($(armtest), on)
GYPFLAGS += -Darm_test=on
endif
# ----------------- available targets: --------------------
# - "dependencies": pulls in external dependencies (currently: GYP)
# - "grokdump": rebuilds heap constants lists used by grokdump
# - any arch listed in ARCHES (see below)
# - any mode listed in MODES
# - every combination <arch>.<mode>, e.g. "ia32.release"
# - "native": current host's architecture, release mode
# - any of the above with .check appended, e.g. "ia32.release.check"
# - "android": cross-compile for Android/ARM
# - "nacl" : cross-compile for Native Client (ia32 and x64)
# - default (no target specified): build all DEFAULT_ARCHES and MODES
# - "check": build all targets and run all tests
# - "<arch>.clean" for any <arch> in ARCHES
# - "clean": clean all ARCHES
# ----------------- internal stuff ------------------------
# Architectures and modes to be compiled. Consider these to be internal
# variables, don't override them (use the targets instead).
ARCHES = ia32 x64 arm arm64 mips mipsel
DEFAULT_ARCHES = ia32 x64 arm
MODES = release debug optdebug
DEFAULT_MODES = release debug
ANDROID_ARCHES = android_ia32 android_arm android_arm64 android_mipsel
NACL_ARCHES = nacl_ia32 nacl_x64
# List of files that trigger Makefile regeneration:
GYPFILES = build/all.gyp build/features.gypi build/standalone.gypi \
build/toolchain.gypi samples/samples.gyp src/d8.gyp \
test/cctest/cctest.gyp tools/gyp/v8.gyp
# If vtunejit=on, the v8vtune.gyp will be appended.
ifeq ($(vtunejit), on)
GYPFILES += src/third_party/vtune/v8vtune.gyp
endif
# Generates all combinations of ARCHES and MODES, e.g. "ia32.release".
BUILDS = $(foreach mode,$(MODES),$(addsuffix .$(mode),$(ARCHES)))
ANDROID_BUILDS = $(foreach mode,$(MODES), \
$(addsuffix .$(mode),$(ANDROID_ARCHES)))
NACL_BUILDS = $(foreach mode,$(MODES), \
$(addsuffix .$(mode),$(NACL_ARCHES)))
# Generates corresponding test targets, e.g. "ia32.release.check".
CHECKS = $(addsuffix .check,$(BUILDS))
QUICKCHECKS = $(addsuffix .quickcheck,$(BUILDS))
ANDROID_CHECKS = $(addsuffix .check,$(ANDROID_BUILDS))
NACL_CHECKS = $(addsuffix .check,$(NACL_BUILDS))
# File where previously used GYPFLAGS are stored.
ENVFILE = $(OUTDIR)/environment
.PHONY: all check clean dependencies $(ENVFILE).new native \
qc quickcheck $(QUICKCHECKS) \
$(addsuffix .quickcheck,$(MODES)) $(addsuffix .quickcheck,$(ARCHES)) \
$(ARCHES) $(MODES) $(BUILDS) $(CHECKS) $(addsuffix .clean,$(ARCHES)) \
$(addsuffix .check,$(MODES)) $(addsuffix .check,$(ARCHES)) \
$(ANDROID_ARCHES) $(ANDROID_BUILDS) $(ANDROID_CHECKS) \
must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN \
$(NACL_ARCHES) $(NACL_BUILDS) $(NACL_CHECKS) \
must-set-NACL_SDK_ROOT
# Target definitions. "all" is the default.
all: $(DEFAULT_MODES)
# Special target for the buildbots to use. Depends on $(OUTDIR)/Makefile
# having been created before.
buildbot:
$(MAKE) -C "$(OUTDIR)" BUILDTYPE=$(BUILDTYPE) \
builddir="$(abspath $(OUTDIR))/$(BUILDTYPE)"
# Compile targets. MODES and ARCHES are convenience targets.
.SECONDEXPANSION:
$(MODES): $(addsuffix .$$@,$(DEFAULT_ARCHES))
$(ARCHES): $(addprefix $$@.,$(DEFAULT_MODES))
# Defines how to build a particular target (e.g. ia32.release).
$(BUILDS): $(OUTDIR)/Makefile.$$@
@$(MAKE) -C "$(OUTDIR)" -f Makefile.$@ \
CXX="$(CXX)" LINK="$(LINK)" \
BUILDTYPE=$(shell echo $(subst .,,$(suffix $@)) | \
python -c "print \
raw_input().replace('opt', '').capitalize()") \
builddir="$(shell pwd)/$(OUTDIR)/$@"
native: $(OUTDIR)/Makefile.native
@$(MAKE) -C "$(OUTDIR)" -f Makefile.native \
CXX="$(CXX)" LINK="$(LINK)" BUILDTYPE=Release \
builddir="$(shell pwd)/$(OUTDIR)/$@"
$(ANDROID_ARCHES): $(addprefix $$@.,$(MODES))
$(ANDROID_BUILDS): $(GYPFILES) $(ENVFILE) build/android.gypi \
must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN Makefile.android
@$(MAKE) -f Makefile.android $@ \
ARCH="$(basename $@)" \
MODE="$(subst .,,$(suffix $@))" \
OUTDIR="$(OUTDIR)" \
GYPFLAGS="$(GYPFLAGS)"
$(NACL_ARCHES): $(addprefix $$@.,$(MODES))
$(NACL_BUILDS): $(GYPFILES) $(ENVFILE) \
Makefile.nacl must-set-NACL_SDK_ROOT
@$(MAKE) -f Makefile.nacl $@ \
ARCH="$(basename $@)" \
MODE="$(subst .,,$(suffix $@))" \
OUTDIR="$(OUTDIR)" \
GYPFLAGS="$(GYPFLAGS)"
# Test targets.
check: all
@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--arch=$(shell echo $(DEFAULT_ARCHES) | sed -e 's/ /,/g') \
$(TESTFLAGS)
$(addsuffix .check,$(MODES)): $$(basename $$@)
@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--mode=$(basename $@) $(TESTFLAGS)
$(addsuffix .check,$(ARCHES)): $$(basename $$@)
@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--arch=$(basename $@) $(TESTFLAGS)
$(CHECKS): $$(basename $$@)
@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--arch-and-mode=$(basename $@) $(TESTFLAGS)
$(addsuffix .quickcheck,$(MODES)): $$(basename $$@)
@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--mode=$(basename $@) $(TESTFLAGS) --quickcheck
$(addsuffix .quickcheck,$(ARCHES)): $$(basename $$@)
@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--arch=$(basename $@) $(TESTFLAGS) --quickcheck
$(QUICKCHECKS): $$(basename $$@)
@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--arch-and-mode=$(basename $@) $(TESTFLAGS) --quickcheck
$(addsuffix .sync, $(ANDROID_BUILDS)): $$(basename $$@)
@tools/android-sync.sh $(basename $@) $(OUTDIR) \
$(shell pwd) $(ANDROID_V8)
$(addsuffix .check, $(ANDROID_BUILDS)): $$(basename $$@).sync
@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--arch-and-mode=$(basename $@) \
--timeout=600 \
--command-prefix="tools/android-run.py" $(TESTFLAGS)
$(addsuffix .check, $(ANDROID_ARCHES)): \
$(addprefix $$(basename $$@).,$(MODES)).check
$(addsuffix .check, $(NACL_BUILDS)): $$(basename $$@)
@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--arch-and-mode=$(basename $@) \
--timeout=600 --nopresubmit --noi18n \
--command-prefix="tools/nacl-run.py"
$(addsuffix .check, $(NACL_ARCHES)): \
$(addprefix $$(basename $$@).,$(MODES)).check
native.check: native
@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR)/native \
--arch-and-mode=. $(TESTFLAGS)
SUPERFASTTESTMODES = ia32.release
FASTTESTMODES = $(SUPERFASTTESTMODES),x64.release,ia32.optdebug,x64.optdebug,arm.optdebug,arm64.release
FASTCOMPILEMODES = $(FASTTESTMODES),arm64.optdebug
COMMA = ,
EMPTY =
SPACE = $(EMPTY) $(EMPTY)
quickcheck: $(subst $(COMMA),$(SPACE),$(FASTCOMPILEMODES))
tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--arch-and-mode=$(SUPERFASTTESTMODES) $(TESTFLAGS) --quickcheck \
--download-data mozilla webkit
tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--arch-and-mode=$(FASTTESTMODES) $(TESTFLAGS) --quickcheck
qc: quickcheck
# Clean targets. You can clean each architecture individually, or everything.
$(addsuffix .clean, $(ARCHES) $(ANDROID_ARCHES) $(NACL_ARCHES)):
rm -f $(OUTDIR)/Makefile.$(basename $@)*
rm -rf $(OUTDIR)/$(basename $@).release
rm -rf $(OUTDIR)/$(basename $@).debug
rm -rf $(OUTDIR)/$(basename $@).optdebug
find $(OUTDIR) -regex '.*\(host\|target\)\.$(basename $@).*\.mk' -delete
native.clean:
rm -f $(OUTDIR)/Makefile.native
rm -rf $(OUTDIR)/native
find $(OUTDIR) -regex '.*\(host\|target\)\.native\.mk' -delete
clean: $(addsuffix .clean, $(ARCHES) $(ANDROID_ARCHES) $(NACL_ARCHES)) native.clean gtags.clean
# GYP file generation targets.
OUT_MAKEFILES = $(addprefix $(OUTDIR)/Makefile.,$(BUILDS))
$(OUT_MAKEFILES): $(GYPFILES) $(ENVFILE)
PYTHONPATH="$(shell pwd)/tools/generate_shim_headers:$(PYTHONPATH)" \
PYTHONPATH="$(shell pwd)/build/gyp/pylib:$(PYTHONPATH)" \
GYP_GENERATORS=make \
build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \
-Ibuild/standalone.gypi --depth=. \
-Dv8_target_arch=$(subst .,,$(suffix $(basename $@))) \
$(if $(findstring optdebug,$@),-Dv8_optimized_debug=2,) \
-S$(suffix $(basename $@))$(suffix $@) $(GYPFLAGS)
$(OUTDIR)/Makefile.native: $(GYPFILES) $(ENVFILE)
PYTHONPATH="$(shell pwd)/tools/generate_shim_headers:$(PYTHONPATH)" \
PYTHONPATH="$(shell pwd)/build/gyp/pylib:$(PYTHONPATH)" \
GYP_GENERATORS=make \
build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \
-Ibuild/standalone.gypi --depth=. -S.native $(GYPFLAGS)
must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN:
ifndef ANDROID_NDK_ROOT
ifndef ANDROID_TOOLCHAIN
$(error ANDROID_NDK_ROOT or ANDROID_TOOLCHAIN must be set))
endif
endif
# Note that NACL_SDK_ROOT must be set to point to an appropriate
# Native Client SDK before using this makefile. You can download
# an SDK here:
# https://developers.google.com/native-client/sdk/download
# The path indicated by NACL_SDK_ROOT will typically end with
# a folder for a pepper version such as "pepper_25" that should
# have "tools" and "toolchain" subdirectories.
must-set-NACL_SDK_ROOT:
ifndef NACL_SDK_ROOT
$(error NACL_SDK_ROOT must be set)
endif
# Replaces the old with the new environment file if they're different, which
# will trigger GYP to regenerate Makefiles.
$(ENVFILE): $(ENVFILE).new
@if test -r $(ENVFILE) && cmp $(ENVFILE).new $(ENVFILE) > /dev/null; \
then rm $(ENVFILE).new; \
else mv $(ENVFILE).new $(ENVFILE); fi
# Stores current GYPFLAGS in a file.
$(ENVFILE).new:
@mkdir -p $(OUTDIR); echo "GYPFLAGS=$(GYPFLAGS)" > $(ENVFILE).new; \
echo "CXX=$(CXX)" >> $(ENVFILE).new
# Heap constants for grokdump.
DUMP_FILE = tools/v8heapconst.py
grokdump: ia32.release
@cat $(DUMP_FILE).tmpl > $(DUMP_FILE)
@$(OUTDIR)/ia32.release/d8 --dump-heap-constants >> $(DUMP_FILE)
# Support for the GNU GLOBAL Source Code Tag System.
gtags.files: $(GYPFILES) $(ENVFILE)
@find include src test -name '*.h' -o -name '*.cc' -o -name '*.c' > $@
# We need to manually set the stack limit here, to work around bugs in
# gmake-3.81 and global-5.7.1 on recent 64-bit Linux systems.
GPATH GRTAGS GSYMS GTAGS: gtags.files $(shell cat gtags.files 2> /dev/null)
@bash -c 'ulimit -s 10240 && GTAGSFORCECPP=yes gtags -i -q -f $<'
gtags.clean:
rm -f gtags.files GPATH GRTAGS GSYMS GTAGS
# Dependencies.
# Remember to keep these in sync with the DEPS file.
dependencies:
svn checkout --force http://gyp.googlecode.com/svn/trunk build/gyp \
--revision 1831
svn checkout --force \
https://src.chromium.org/chrome/trunk/deps/third_party/icu46 \
third_party/icu --revision 258359