JS-to-Wasm wrappers embed heap constants (like the undefined value), and
those heap values are being accessed during compilation for tracing.
This is not a data race, since those values are read-only. But if the
isolate dies while we are compiling those wrappers, we might read from
the heap after it has been free'd.
Ideally we would not access the isolate or the heap at all during
compilation, but delaying all tracing until the "finalization" phase is
not feasible, and removing the heap value printing from tracing would
significantly regress quality of this tracing.
Hence this CL only fixes the actual issue: That we keep compiling
wrappers when the isolate is already gone. It does so by introducing an
{OperationsBarrier} per isolate that is being taken by each thread that
executes wrapper compilation, and is used for waiting for background
threads to finish before the isolate shuts down.
Additionally, we actually cancel all compilation if a module dies (or
the isolate shuts down) before it finished baseline compilation. In this
state, the module cannot be shared between isolates yet, so it's safe to
fully cancel all compilation. This cancellation is not strictly
necessary, but it will reduce the time we are blocked while waiting for
wrapper compilation to finish (because no new compilation will start).
R=thibaudm@chromium.orgCC=manoskouk@chromium.org
Bug: v8:11626, chromium:1200231
Change-Id: I5b19141d22bd0cb00ba84ffa53fb07cf001e13cc
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2846881
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74142}
This will make --regenerate_expected_files flag work for message tests.
Bug: v8:10773
Change-Id: Ica87bd69bd0a41e2a3c168d2200d0cd0c7f094da
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2842387
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74127}
Unordered floating-point (non-)equality is implemented using two flags
on x64: kUnorderedNotEqual as "not_equal OR parity_even" and
kUnorderedEqual as "equal AND parity_odd". Only the first flag was
checked.
This change fixes the kUnorderedNotEqual case by emitting a second
cmov to also move the "true" value if the parity_even flag is set. The
kUnorderedEqual case is covered by inverting the condition in the
instruction selector.
This should also be optimal according to the code emitted by clang -O3
for equivalent C++ code.
Drive-by: remove unused overload of EmitWithContinuation.
R=neis@chromium.orgCC=ahaas@chromium.org
Bug: chromium:1200184
Change-Id: Iae438d29fb5897ca910a154f140a5a6a904490ec
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2844651
Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74122}
Until this CL, the JSHeapBroker::GetPropertyAccessInfo (GPAI) process
was as follows:
1. GPAI is called on the main thread (MT) during the serialization
phase to create and cache PAIs.
2. GPAI is called again from the background thread (BT); only cached
PAIs from step 1 are usable.
As part of concurrent inlining, the goal is to move GPAI fully to the
background thread. This CL takes a major step in that direction by
making GPAI itself callable from the BT without resorting solely to PAIs
that were previously cached on the MT.
There are two main reasons why GPAI previously had to run on the MT:
a) Concurrent access to Maps and other heap objects.
b) Serialization and creation of ObjectRefs for objects discovered
during GPAI.
This CL addresses only reason a) and leaves b) for future work. This
is done by keeping the two-pass approach, s.t. the initial call of
GPAI on the MT discovers and serializes objects. We then clear all
cached PAIs. The second call of GPAI on the BT thus runs full logic in a
concurrent setting.
Once all relevant objects (= maps and prototypes) no longer require
MT-serialization, reason b) is also addressed and the first pass can be
removed.
The new logic is implemented behind the runtime flag
--turbo-concurrent-get-property-access-info (default true), intended
to be removed in the future.
Bug: v8:7790
Change-Id: Idbdbfe091d7316529246a686bb6d71c2a0f06f8b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2817793
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Auto-Submit: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74120}
As we can still intend to run the web-exposed profiler outside of an
origin-isolated environment, add support back for filtering by
v8::Context.
This reverts commit 05af368100.
Bug: chromium:956688
Change-Id: Idd98bea3213b5963f689a04de6c3743073efc587
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2785806
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Andrew Comminos <acomminos@fb.com>
Cr-Commit-Position: refs/heads/master@{#74112}
Instead of {func-index}+{pc of instruction relative to function}, make
it {func-index}:{pc of instruction in module}. This is more consistent
with existing conventions
(https://webassembly.github.io/spec/web-api/index.html#conventions) and
other tools (like output of wasm-objdump).
Bug: v8:10773
Change-Id: I7ceecafd984e2d1adbb57266e1f7448762e23ac9
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2842267
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74110}
After appending 'unimplemented instruction' we need to increase the data
pointer to avoid an endless loop and to fulfill a later DCHECK.
R=jkummerow@chromium.org
Bug: chromium:1201114
Change-Id: I707809f81a4d9a6b3653b94b4836482c006b76ad
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2843819
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74108}
This CL hardens the test function for unwrapping the C++ object to
only do so if the correct API object is passed from JS.
Bug: chromium:1201057
Change-Id: I81eb16efe2711bd788c775e3bcb712720bbe4782
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2843347
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Commit-Queue: Maya Lekova <mslekova@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74102}
Changes:
- Remove TypeCheckBranchResult. Change TypeCheckBranch() to return bool.
Refactor call sites to reflect this (decouple current code
reachability check from type check).
- Unify TypeCheckBranch(), TypeCheckFallthrough(), and the type-checking
part of Return() into TypeCheckStackAgainstMerge().
- Make sure all TypeCheck* functions are only called within VALIDATE.
- In graph-builder-interface, rename end_env -> merge_env to reflect
its function for loops.
- Change expected error messages in some tests.
Change-Id: I857edc18db9c2454ad12d539ffe7a10e96367710
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2839560
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74100}
Similar to the recent change to --code-comments, make --debug-code a
build-time enabled flag, enabled by default on debug builds.
This also removes the emit_debug_code() option from the assembler,
instead using the flag directly (there were no cases where this option
didn't match the global flag).
Change-Id: Ic26b0d37b615a055508c9dda099ffbe979eae030
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2843348
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74095}
- Add filter to skip baseline handlers
- Make profiler types more readable
- Refactor tickprocessor test to use serialized symbols
- Add large tickprocessor stress test with a complete V8 log
Change-Id: Icc09c2eb8ea63c1805d793d2d47f79b0d5080b5b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2784686
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Patrick Thier <pthier@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74094}
This CL disables two more fast API calls tests that shouldn't be run
on stress_snapshot and jitless variants.
Change-Id: I2e3270ba7b93e598219b87195640675cfc4571ef
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2843362
Commit-Queue: Maya Lekova <mslekova@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Auto-Submit: Maya Lekova <mslekova@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74091}
Flag reads from background threads are unfortunately scattered and
hard to completely avoid in the current state of V8. An example TSAN
failure:
ci.chromium.org/ui/p/v8/builders/ci/V8%20Linux64%20TSAN/36369/overview
The root cause is that FlagScope destruction modifies flag values on
the main thread, racing with flag reads from the background thread. In
cctests, there's no need to reset flags back to initial values at the
end of tests. Let's simply remove the problematic flag scopes.
Bug: v8:11658
Change-Id: I59ed3794ddc9ed570772726a423dc22afc4dc207
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2843346
Auto-Submit: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74082}
This CL hardens the test facility in d8 for interface types for
the fast C API.
Bug: chromium:1201011
Change-Id: Ibfe1bb242f86b4a5edd0d195e049852430f8a2fe
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2843344
Commit-Queue: Maya Lekova <mslekova@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74079}
Enabling and disable RCS at runtime races with concurrent threads
that use RCS.
Bug: v8:11338
Change-Id: I8fa9edcbaefc339f88b2a0d079d094a7e4290fbf
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2840446
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Auto-Submit: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74074}
This is a reland of d5457f5fb7
after a speculative revert.
Additionally it fixes an issue with throwing promise hooks.
Original change's description:
> [api] JSFunction PromiseHook for v8::Context
>
> This will enable Node.js to get much better performance from async_hooks
> as currently PromiseHook delegates to C++ for the hook function and then
> Node.js delegates it right back to JavaScript, introducing several
> unnecessary barrier hops in code that gets called very, very frequently
> in modern, promise-heavy applications.
>
> This API mirrors the form of the original C++ function based PromiseHook
> API, however it is intentionally separate to allow it to use JSFunctions
> triggered within generated code to, as much as possible, avoid entering
> runtime functions entirely.
>
> Because PromiseHook has internal use also, beyond just the Node.js use,
> I have opted to leave the existing API intact and keep this separate to
> avoid conflicting with any possible behaviour expectations of other API
> users.
>
> The design ideas for this new API stemmed from discussion with some V8
> team members at a previous Node.js Diagnostics Summit hosted by Google
> in Munich, and the relevant documentation of the discussion can be found
> here: https://docs.google.com/document/d/1g8OrG5lMIUhRn1zbkutgY83MiTSMx-0NHDs8Bf-nXxM/edit#heading=h.w1bavzz80l1e
>
> A summary of the reasons for why this new design is important can be
> found here: https://docs.google.com/document/d/1vtgoT4_kjgOr-Bl605HR2T6_SC-C8uWzYaOPDK5pmRo/edit?usp=sharing
>
> Bug: v8:11025
> Change-Id: I0b403b00c37d3020b5af07b654b860659d3a7697
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2759188
> Reviewed-by: Marja Hölttä <marja@chromium.org>
> Reviewed-by: Camillo Bruni <cbruni@chromium.org>
> Reviewed-by: Anton Bikineev <bikineev@chromium.org>
> Reviewed-by: Igor Sheludko <ishell@chromium.org>
> Commit-Queue: Camillo Bruni <cbruni@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#73858}
Bug: v8:11025
Bug: chromium:1197475
Change-Id: I73a71e97d9c3dff89a2b092c3fe4adff81ede8ef
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2823917
Reviewed-by: Marja Hölttä <marja@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Anton Bikineev <bikineev@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74071}
Mistakenly had its set as non-atomic when it was modifying maps the
concurrent compiler could see. Since this accessor is set after map
initialization, but it is not necessary for synchronization we can set
it as relaxed write.
Bug: v8:7790, v8:11668
Change-Id: I605935e96b3da47ed6abfb6676bf14456feeeddd
Fixed: v8:11668
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2839548
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Santiago Aboy Solanes <solanes@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74066}
The test fails because of the race condition between concurrent GC
threads and the destructor of the test.
Bug: v8:11413
Change-Id: I5a138a61c16ddf2398e7c54defe6cc4008ca3330
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2839552
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Commit-Queue: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74065}
This is a reland of 6124a534b2
It fixes a UAF issue in the d8 test by moving the test API object
constructor to PerIsolateData. It also fixes a crash in Chromium
caused by current usage of v8::ApiObject, which should be migrated
to v8::Value*.
Original change's description:
> [fastcall] Add support for leaf interface type checks
>
> This CL adds an IsTemplateForApiObject method to FunctionTemplate
> allowing the embedder to check whether a given API object was
> instantiated by this template without including parent templates
> in the search. It also replaces the v8::ApiObject in the fast API
> with a raw v8::Value pointer to allow use of standard C++ casts.
>
> Bug: chromium:1052746
> Change-Id: I0812ec8b4daaa5f5005aabf10b63e1e84e0b8f03
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2595310
> Commit-Queue: Maya Lekova <mslekova@chromium.org>
> Reviewed-by: Georg Neis <neis@chromium.org>
> Reviewed-by: Camillo Bruni <cbruni@chromium.org>
> Reviewed-by: Sathya Gunasekaran <gsathya@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#73999}
Bug: chromium:1052746, chromium:1199900
Change-Id: I4b7f0c9e9152919dde4a1d0c48fbf5ac8c5b13d8
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2835711
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Sathya Gunasekaran <gsathya@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Commit-Queue: Maya Lekova <mslekova@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74064}
This is a reland of df52b65dba
Skip test with variant stress-concurrent-allocation.
The test manually triggers pretenuring for allocation sites, but with
--stress-concurrent-allocation these pretenuring decisions are reset
due to low survival rate in old generation.
Original change's description:
> [test] Rework Allocation Site Pretenruing Tests
>
> - Add %PretenureAllocationSite to manually force pretenuring for an
> allocation site during the next GC.
> - Replace cctest test-compiler/DecideToPretenureDuringCompilation, which
> was not triggering the tested behaviour anymore with mjsunit test
> - Add tests for deoptimizations due to pretenuring decision changes
> during OSR.
>
> Bug: chromium:1193094
> Change-Id: I5d6c35e2914b705bf96f27051a4a286413b6fe26
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2825593
> Commit-Queue: Patrick Thier <pthier@chromium.org>
> Reviewed-by: Maya Lekova <mslekova@chromium.org>
> Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#74032}
Bug: chromium:1193094
Change-Id: I366a4a074435ebffcf2b3af84152067731cd2a5e
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2839550
Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Commit-Queue: Patrick Thier <pthier@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74062}
This is a reland of c83c9590ba
Changes since revert: nothing, issue was crbug.com/v8/11666
Original change's description:
> [ic] Add a new MegaDOM IC
>
> This patch implements the MegaDOM IC setup and access. A new MegaDOM
> IC state indicates that we've seen only DOM accessors at this access
> site.
>
> This CL only adds support for DOM getters in LoadIC, other kinds of
> access will be added in follow on CLs.
>
> Still remaining TODO before shipping:
> 1. Have a mechanism to invalidate the protector
> 2. Have a mechanism to find the accessors that aren't overloaded
> 3. Use a new builtin to miss to runtime on access check failure
>
> Change-Id: Ie12efe5e9fa284f023043b996d61e7d74e710ee2
> Bug: v8:11321
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2618239
> Reviewed-by: Omer Katz <omerkatz@chromium.org>
> Reviewed-by: Camillo Bruni <cbruni@chromium.org>
> Reviewed-by: Dan Elphick <delphick@chromium.org>
> Reviewed-by: Mythri Alle <mythria@chromium.org>
> Commit-Queue: Sathya Gunasekaran <gsathya@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#73733}
Bug: v8:11321
Change-Id: I2bec54465542b5b40c42adb6eb12b6ce72cce5bd
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2794439
Reviewed-by: Dan Elphick <delphick@chromium.org>
Reviewed-by: Mythri Alle <mythria@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Omer Katz <omerkatz@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Sathya Gunasekaran <gsathya@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74056}
- Add v8_code_comments to allow runtime-enabled code comments with
--code-comments
- v8_code_comments is enable by default in debug mode
- Make MacroAssembler::RecordComment helper inlineable to remove
call and check overheads when v8_code_comments = false
- Make FLAG_code_comments readonly if v8_code_comments = false and
benefit from dead-code elimination
This saves roughly 5% CompileBaselineVisit time in sparkplug
on a 5MiB JS file.
Bug: v8:11420
Change-Id: I1174ab37b4bbe1ff8880416c1f6a6e28377a962c
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2824428
Reviewed-by: Bill Budge <bbudge@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74055}
The plan is to use VirtualMemoryCage both for the pointer compression
cage as well as the code range in a future CL. The PtrComprCage class is
removed in favor of using VirtualMemoryCage directly.
Bug: v8:11460
Change-Id: I4e34a3db1359319e3539ede587f6a73e0af03eec
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2824098
Commit-Queue: Shu-yu Guo <syg@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Junliang Yan <junyan@redhat.com>
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74048}
The --wasm-write-protect-code-memory flag previously enforced W^X, that
is the WebAssembly code space was either writable or executable, but
never both at the same time. With compilation in background threads
concurrent to execution in the main thread, this simple scheme is no
longer viable because the same memory page can indeed be written to and
executed at the same time. Hence, this flag is currently broken and
disabled and the code space is always writable AND executable.
As a first step towards more security, we at least want to
write-protect the code space (when not required writable by compilation
threads) but at the same time keep it always executable (because of
concurrent execution in the main thread). That is, we no longer switch
between RX and RW (W^X), but rather between RX and RWX
(write-protection only).
This CL starts to change from W^X (which was broken) to
write-protection only when enabling --wasm-write-protect-code-memory.
This is the first of two CLs, where the followup CL will fix the
feature, and this CL merely prepares and cleans up the code. In
particular, this CL changes the permissions from RW to RWX (due to
concurrent execution) and renames `WasmCodeAllocator::SetExecutable()`
to `WasmCodeAllocator::SetWritable()` (and similarly named callers) to
be consistent with that change. Since the code space is now always
executable, this CL also removes now unneeded calls to
`SetExecutable(true)` in tests.
R=clemensb@chromium.org
CC=jkummerow@chromium.org
Bug: v8:11663
Change-Id: I2065eed6770215892b81daefbddf74a349e783cc
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2835237
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Daniel Lehmann <dlehmann@google.com>
Cr-Commit-Position: refs/heads/master@{#74041}
This reverts commit df52b65dba.
Reason for revert: fails on TSan: https://ci.chromium.org/ui/p/v8/builders/ci/V8%20Linux64%20TSAN/36351/overview
Original change's description:
> [test] Rework Allocation Site Pretenruing Tests
>
> - Add %PretenureAllocationSite to manually force pretenuring for an
> allocation site during the next GC.
> - Replace cctest test-compiler/DecideToPretenureDuringCompilation, which
> was not triggering the tested behaviour anymore with mjsunit test
> - Add tests for deoptimizations due to pretenuring decision changes
> during OSR.
>
> Bug: chromium:1193094
> Change-Id: I5d6c35e2914b705bf96f27051a4a286413b6fe26
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2825593
> Commit-Queue: Patrick Thier <pthier@chromium.org>
> Reviewed-by: Maya Lekova <mslekova@chromium.org>
> Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#74032}
Bug: chromium:1193094
Change-Id: I0cd526984d467c4e1e3637ac642f630e3cffea41
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2835715
Auto-Submit: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Cr-Commit-Position: refs/heads/master@{#74039}
- Add %PretenureAllocationSite to manually force pretenuring for an
allocation site during the next GC.
- Replace cctest test-compiler/DecideToPretenureDuringCompilation, which
was not triggering the tested behaviour anymore with mjsunit test
- Add tests for deoptimizations due to pretenuring decision changes
during OSR.
Bug: chromium:1193094
Change-Id: I5d6c35e2914b705bf96f27051a4a286413b6fe26
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2825593
Commit-Queue: Patrick Thier <pthier@chromium.org>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74032}
This test attempted to call mprotect to switch memory permissions,
which returns an error on MacOS on arm64. The workaround is simple:
don't call mprotect, rely on MacOS-specific permission switching.
See also https://chromium-review.googlesource.com/c/v8/v8/+/2679688
for a related fix in non-test code.
Drive-by: fix host arch detection in gm.py when building on M1 Macs.
Bug: v8:11657
Change-Id: I9b59ee8f2279e28f7561ac071df27508211741f3
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2831877
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74030}
This is a reland of dcd91455fd
This CL fixes two more tests that were uncovered by the
non-concurrent marking bot.
Original change's description:
> [heap] Do not scan main thread handles when starting marking
>
> We do not need to scan main thread handles when starting incremental
> marking. This reduces the time to start incremental marking.
>
> Bug: v8:11645
> Change-Id: Ib99a13e7875f50fbfe5346ac0e186d8960ea1337
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2826124
> Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
> Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#73994}
Bug: v8:11645
Change-Id: Id5b9dd0dcec08b6888a885b4f02783f674af90fc
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2831879
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74029}
Should be unskipped once the linked issue is fixed.
Tbr: mvstanton@chromium.org
Bug: v8:11649
Change-Id: I9916c6f044a9c66d9a55d7783a619b2830a776ad
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2833916
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74023}
The mechanisms don't interact well. NodeObserver assumes synchronous
compilation that finishes within the ObserverNodeScope. One could
ensure all relevant lifetimes (of the NodeObserver itself, and all
captured pointers) exceed that of all spawned jobs, but simply
disabling the additional concurrent job in these cases is a
pragmatic fix for now.
Bug: v8:11658
Change-Id: I41b2f96f0166b661cf0cca94ef809ca99475e420
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2833915
Auto-Submit: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74022}
This reverts commit d16eefe0f2.
It is not correct to check for node equality during the graph
construction phase, because we can have optimizations that will combine
same nodes. So it can happen that in wasm-compiler, the inputs to
shuffle are not the same, so we canonicalize using that knowledge that
it will not be the same, and allow indices > 15. But later we can have
optimizations that combine the 2 inputs (e.g. splat of the same
constants), and the instruction selector will see that the input nodes
are the same.
Bug: v8:11542,chromium:1199662
Change-Id: I21c175f4707708038710147f64d687d1b14c6ecc
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2829986
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Reviewed-by: Bill Budge <bbudge@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74017}
This reverts commit 6124a534b2.
Reason for revert: On suspicion of blocking V8 roll: https://ci.chromium.org/ui/p/chromium/builders/try/win10_chromium_x64_rel_ng/839568/overview
Original change's description:
> [fastcall] Add support for leaf interface type checks
>
> This CL adds an IsTemplateForApiObject method to FunctionTemplate
> allowing the embedder to check whether a given API object was
> instantiated by this template without including parent templates
> in the search. It also replaces the v8::ApiObject in the fast API
> with a raw v8::Value pointer to allow use of standard C++ casts.
>
> Bug: chromium:1052746
> Change-Id: I0812ec8b4daaa5f5005aabf10b63e1e84e0b8f03
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2595310
> Commit-Queue: Maya Lekova <mslekova@chromium.org>
> Reviewed-by: Georg Neis <neis@chromium.org>
> Reviewed-by: Camillo Bruni <cbruni@chromium.org>
> Reviewed-by: Sathya Gunasekaran <gsathya@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#73999}
Bug: chromium:1052746
Change-Id: Ic99ec616310f0f75800c3dad393b5d2d685b76ab
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2829988
Auto-Submit: Shu-yu Guo <syg@chromium.org>
Commit-Queue: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Cr-Commit-Position: refs/heads/master@{#74016}
When the enumerability flag is flipped we need to invalidate the
prototype info.
Bug: chromium:1163499
Change-Id: Iceeaa5fc47eebfe7d333c9eb594bf0763e6cef92
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2831871
Commit-Queue: Toon Verwaest <verwaest@chromium.org>
Auto-Submit: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74013}
This is a reland of ae0752df1b
Reland fixes:
* Remove UNREACHABLE() from constexpr switch, since we don't have a
CONSTEXPR_UNREACHABLE() (it's ok, the switch is exhaustive for the
enum anyway).
* Fix IsRegisterArray trait to use public inheritance and size_t for
std::array size.
Original change's description:
> [codegen] Add static interface descriptors
>
> Add a new CRTP StaticCallInterfaceDescriptor class, which provides
> static constexpr getters for a descriptor's registers, parameter counts,
> and so on. Each CallInterfaceDescriptor subclass is changed to extend
> StaticCallInterfaceDescriptor, with StaticCallInterfaceDescriptor itself
> extending CallInterfaceDescriptor to still provide a dynamic lookup
> where needed.
>
> StaticCallInterfaceDescriptor provides a couple of customisation points,
> where it reads its CRTP derived descriptor's static fields and
> functions, with default fallbacks where appropriate. With these
> customisation points, the definition of CallInterfaceDescriptor
> subclasses is simplified to:
>
> a) Providing parameter names (as before)
> b) Providing parameter types (as before)
> c) Optionally setting flags (like kNoContext or kAllowVarArgs) as
> static booleans on the class.
> d) Optionally providing a `registers()` method that returns a
> std::array<Register, N> of registers that may be used for
> parameters (if not provided, this defaults to the implementation
> specific default register set).
>
> Parameter registers (and register count) are automagically set based on
> the number of parameters and number of given registers, with extra magic
> to ignore no_reg registers (to reduce ia32 special casing). The
> CallInterfaceDescriptorData is initialized based on these static
> functions, rather than manual per-descriptor initializers.
>
> This allows us to skip loading descriptors dynamically for CallBuiltin
> in Sparkplug, and instead lets us use a bit of template magic to
> statically set up arguments for the calls. Any other users of statically
> known descriptors will also benefit, thanks to C++ picking the static
> methods over the dynamic methods on the base class when available.
>
> Because we can remove various virtual functions and trigger heavier
> inlining of constantly known values, binary size slightly decreases with
> this change.
>
> Note that torque-generated descriptors are changed to use the same magic,
> rather than having Torque-specific magic, for consistency.
>
> Bug: v8:11420
> Change-Id: Icc5e238b6313a08734feb564204a13226b450c22
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2814518
> Auto-Submit: Leszek Swirski <leszeks@chromium.org>
> Reviewed-by: Nico Hartmann <nicohartmann@chromium.org>
> Reviewed-by: Clemens Backes <clemensb@chromium.org>
> Reviewed-by: Igor Sheludko <ishell@chromium.org>
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Commit-Queue: Clemens Backes <clemensb@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#73996}
TBR=nicohartmann@chromium.org,clemensb@chromium.org,ishell@chromium.org,clemensb@chromium.org
Bug: v8:11420
Change-Id: Icd1f6cdb3c178e74460044b1e9623139929ceba8
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2831872
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74010}
This change slipped into https://crrev.com/c/2820970 and wasn't
intended. We actually need to rule out __proto__ here explicitly,
otherwise it starts showing up in previews for embedder objects
(i.e. for HTMLAllCollection, etc.).
Bug: chromium:1197019
Change-Id: Iadde73747c157c2b5b013b11a6b8a30cc4394a7e
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2831481
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Auto-Submit: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Philip Pfaffe <pfaffe@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74009}
The "num_exceptions" field of the control block must be updated before
entering the stack check, because it is used in
"GetCurrentDebugSideTable" to compute the correct indices for the debug
side table.
R=clemensb@chromium.org
Bug: chromium:1199526
Change-Id: I54f1e4244bf84d0a78b47a764fedc83b54758d01
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2831483
Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74003}
This reverts commit ae0752df1b.
Reason for revert: Predictably, constexpr issues on non-clang compilers.
Original change's description:
> [codegen] Add static interface descriptors
>
> Add a new CRTP StaticCallInterfaceDescriptor class, which provides
> static constexpr getters for a descriptor's registers, parameter counts,
> and so on. Each CallInterfaceDescriptor subclass is changed to extend
> StaticCallInterfaceDescriptor, with StaticCallInterfaceDescriptor itself
> extending CallInterfaceDescriptor to still provide a dynamic lookup
> where needed.
>
> StaticCallInterfaceDescriptor provides a couple of customisation points,
> where it reads its CRTP derived descriptor's static fields and
> functions, with default fallbacks where appropriate. With these
> customisation points, the definition of CallInterfaceDescriptor
> subclasses is simplified to:
>
> a) Providing parameter names (as before)
> b) Providing parameter types (as before)
> c) Optionally setting flags (like kNoContext or kAllowVarArgs) as
> static booleans on the class.
> d) Optionally providing a `registers()` method that returns a
> std::array<Register, N> of registers that may be used for
> parameters (if not provided, this defaults to the implementation
> specific default register set).
>
> Parameter registers (and register count) are automagically set based on
> the number of parameters and number of given registers, with extra magic
> to ignore no_reg registers (to reduce ia32 special casing). The
> CallInterfaceDescriptorData is initialized based on these static
> functions, rather than manual per-descriptor initializers.
>
> This allows us to skip loading descriptors dynamically for CallBuiltin
> in Sparkplug, and instead lets us use a bit of template magic to
> statically set up arguments for the calls. Any other users of statically
> known descriptors will also benefit, thanks to C++ picking the static
> methods over the dynamic methods on the base class when available.
>
> Because we can remove various virtual functions and trigger heavier
> inlining of constantly known values, binary size slightly decreases with
> this change.
>
> Note that torque-generated descriptors are changed to use the same magic,
> rather than having Torque-specific magic, for consistency.
>
> Bug: v8:11420
> Change-Id: Icc5e238b6313a08734feb564204a13226b450c22
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2814518
> Auto-Submit: Leszek Swirski <leszeks@chromium.org>
> Reviewed-by: Nico Hartmann <nicohartmann@chromium.org>
> Reviewed-by: Clemens Backes <clemensb@chromium.org>
> Reviewed-by: Igor Sheludko <ishell@chromium.org>
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Commit-Queue: Clemens Backes <clemensb@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#73996}
Bug: v8:11420
Change-Id: Ie5469c9253fc140590ac30b72db6eb1d93f86806
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2831485
Auto-Submit: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Cr-Commit-Position: refs/heads/master@{#74000}
This CL adds an IsTemplateForApiObject method to FunctionTemplate
allowing the embedder to check whether a given API object was
instantiated by this template without including parent templates
in the search. It also replaces the v8::ApiObject in the fast API
with a raw v8::Value pointer to allow use of standard C++ casts.
Bug: chromium:1052746
Change-Id: I0812ec8b4daaa5f5005aabf10b63e1e84e0b8f03
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2595310
Commit-Queue: Maya Lekova <mslekova@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Sathya Gunasekaran <gsathya@chromium.org>
Cr-Commit-Position: refs/heads/master@{#73999}
Add a new CRTP StaticCallInterfaceDescriptor class, which provides
static constexpr getters for a descriptor's registers, parameter counts,
and so on. Each CallInterfaceDescriptor subclass is changed to extend
StaticCallInterfaceDescriptor, with StaticCallInterfaceDescriptor itself
extending CallInterfaceDescriptor to still provide a dynamic lookup
where needed.
StaticCallInterfaceDescriptor provides a couple of customisation points,
where it reads its CRTP derived descriptor's static fields and
functions, with default fallbacks where appropriate. With these
customisation points, the definition of CallInterfaceDescriptor
subclasses is simplified to:
a) Providing parameter names (as before)
b) Providing parameter types (as before)
c) Optionally setting flags (like kNoContext or kAllowVarArgs) as
static booleans on the class.
d) Optionally providing a `registers()` method that returns a
std::array<Register, N> of registers that may be used for
parameters (if not provided, this defaults to the implementation
specific default register set).
Parameter registers (and register count) are automagically set based on
the number of parameters and number of given registers, with extra magic
to ignore no_reg registers (to reduce ia32 special casing). The
CallInterfaceDescriptorData is initialized based on these static
functions, rather than manual per-descriptor initializers.
This allows us to skip loading descriptors dynamically for CallBuiltin
in Sparkplug, and instead lets us use a bit of template magic to
statically set up arguments for the calls. Any other users of statically
known descriptors will also benefit, thanks to C++ picking the static
methods over the dynamic methods on the base class when available.
Because we can remove various virtual functions and trigger heavier
inlining of constantly known values, binary size slightly decreases with
this change.
Note that torque-generated descriptors are changed to use the same magic,
rather than having Torque-specific magic, for consistency.
Bug: v8:11420
Change-Id: Icc5e238b6313a08734feb564204a13226b450c22
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2814518
Auto-Submit: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Nico Hartmann <nicohartmann@chromium.org>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#73996}
We do not need to scan main thread handles when starting incremental
marking. This reduces the time to start incremental marking.
Bug: v8:11645
Change-Id: Ib99a13e7875f50fbfe5346ac0e186d8960ea1337
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2826124
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
Cr-Commit-Position: refs/heads/master@{#73994}
Instead, bail out of inline literal creation if a deprecated map is
found. This makes it easier to compile on the background thread.
Bug: v8:7790
Change-Id: I87941938d4f13dcf49230cf246c33bf2f49897f5
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2745134
Commit-Queue: Michael Stanton <mvstanton@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#73988}
- represent smis as fake heap numbers
- numbers nodes (both smi and heap numbers) reference a child node whose
name is "value" and whose entry is the string representation of that
number
That feature is disabled by default, and can be enabled by passing
captureNumericValue: true when calling HeapProfiler.takeHeapSnapshot
This patch slightly refactors some functions that operate on "essential
objects". We now check that the object is essential before trying to
create the entry. Otherwise, we would end up with smi objects created,
but not referenced anywhere.
Design doc:
https://docs.google.com/document/d/1Qh1zxyn0SS5wzJzitD6ecBJTdFbQkJogSMwxDRsn44o/edit
Change-Id: Ibbe6e79a54c4f9eace72bc0a0ccb622a97698e00
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2806747
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Arnaud Renevier <arenevier@fb.com>
Cr-Commit-Position: refs/heads/master@{#73985}
The typing of br_table was relaxed in
https://github.com/WebAssembly/spec/pull/1305. Before, we had to compute
the greatest lower bound of all branch types and make sure that stack
values are subtypes of that type. Now, we have to check that the stack
values are subtypes of each individual branch. This makes a difference
only in polymorphic stacks, but greatly simplifies the code, especially
with the upcoming introduction of a much more complex type system in
wasm-gc.
Change-Id: I6e3b410cfe0e71a97623b3030b3575ef707c4900
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2827897
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#73982}
This test relies on non-concurrent optimizations to precisely test
transitions between the different tiers.
Disable flags that invalidate this test:
--no-always-opt to test transiation from Ignition to Sparkplug
--deopt-every-n-times=0 to test transition from Sparkplug to TF
Bug: v8:11656
Change-Id: I85047015d3f7cfdf00bddad59c9742d5d8f5d223
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2827902
Auto-Submit: Patrick Thier <pthier@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#73978}
Changes:
- Implement function subtyping in wasm-subtyping.cc.
- Add Signature::Build(), which takes initializer lists for the return
and parameter types.
- Only throw kTrapFuncSigMismatch in call_indirect, change that trap's
message.
- Add a missing "return 0" in function-body-decoder-impl.h
- Fix a faulty check in wasm-objects.cc.
- Improve some comments.
- Write tests. Improve readability of subtyping-unittest.
Bug: v8:7748
Change-Id: I1caba09d5bd01cfd4d6125f300cd9c16af7aba99
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2822633
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#73972}
- FLAG_turbo_inline_js_wasm_calls data race
- Map::instance_descriptors non-atomic concurrent loads
- Skip one more cctest incompatible with stress_concurrent_inlining
Bug: v8:7790,v8:11648,v8:11651
Change-Id: Ie4833373a1da34497f4cfe129254071d8a5772dd
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2827891
Reviewed-by: Santiago Aboy Solanes <solanes@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#73970}
.. to increase coverage of concurrent inlining, at least in this stress
mode. The common pattern in mjsunit tests is to call
`%OptimizeFunctionOnNextCall(f)` for interesting function `f`. This
explicitly triggers non-concurrent compilation, significantly decreasing
relevant coverage of concurrent inlining.
This CL recovers coverage by spawning an additional concurrent compile
job when 1. --stress-concurrent-inlining is enabled, and 2. the
requested compile mode is non-concurrent. The result of these
additional jobs is discarded.
Drive-by: Fix two simple uncovered issues.
Bug: v8:7790,v8:11513,v8:11648
Change-Id: If1e8ca5ba737e3cecdec9e15e4a86b28fe9fb2de
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2824440
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#73967}
Migrating unittests from Blink that were not already covered by cppgc.
Bug: chromium:1056170
Change-Id: If31591c3f1e99562028087c2b818f5ceb8122ec9
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2821542
Commit-Queue: Omer Katz <omerkatz@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#73960}
Instead of assigning serial numbers when the template infos are
created, this patch creates serial numbers only when they are added to
cache.
This way only the ones that are first instantiated are allocated the
fast template cache. Previously, various accessors and methods that
would almost never get instantiated got assigned to the fast template
cache.
Bug: v8:11284
Change-Id: I8f7578aa0dae48267bbc6303515114eb6e24c1c4
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2621081
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Sathya Gunasekaran <gsathya@chromium.org>
Cr-Original-Commit-Position: refs/heads/master@{#73655}
TBR: ulan@chromium.org
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2825592
Cr-Commit-Position: refs/heads/master@{#73951}
We optimized swizzle with constant mask, but failed to actually swizzle
using the masks...
Bug: v8:10992
Change-Id: If655fdad1e17e92b62e8a2eaabbf1f8d82e4d5e4
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2822951
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#73943}
This is similar in spirit to https://crrev.com/c/2808621, which is to
ensure that no matter what combination of --[no-]enable-{extension} flag
is passed, we end up with a set of supported extensions that make sense.
The 2 rules are:
- If a newer extension is supported (SSE4_2), older extensions are
supported (SSE4_1, SSSE3, SSE3),
- If an older extension is not supported (SSE4_1), new extensions are
not supported (SSE4_2, AVX)
Tests have been added to both ia32 and x64 to check that we follow these
above 2 rules.
We change the ProbeImpl to have a reconciliation step to ensure that we
stick to the 2 rules.
E.g. if --enable-avx --no-enable-sse4-2, we will first set AVX to
supported, then in the second step, fix-up AVX to unsupported. In this
sense, the --no version of the flags take priority. This more accurately
follows the intention of the flags.
Bug: chromium:1195579
Change-Id: I0390f24de9d203fe6bbd4cc02a23771a1f052618
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2818570
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#73942}
Added a comparison to throw a TypeError when the "enumerable"
field of the new descriptor doesn't match the one of the old descriptor.
Bug: v8:10782
Change-Id: I2f1acf215e597b85be5d29e22c006cbd79afcb47
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2818067
Commit-Queue: Luis Fernando Pardo Sixtos <lpardosixtos@microsoft.com>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/master@{#73941}
- Add %BaselineOsr to manually trigger OSR to Baseline.
- Add flags to %GetOptimizationStatus to check if the topmost frame is
an Interpreter/Baseline frame.
- Add mjsunit test.
Bug: v8:11420
Change-Id: Id80421ad97ee719a67ef299cc700da9c44f23bae
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2814567
Auto-Submit: Patrick Thier <pthier@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Commit-Queue: Patrick Thier <pthier@chromium.org>
Cr-Commit-Position: refs/heads/master@{#73937}
The CanAllocateArray used to be executed during JSCreateLowering,
leading to bailouts when large arrays are passed as arguments to
an async function or a bound function. This meant that
JSCreateAsyncFunctionObject or JSCreateBoundFunction will reach
JSGenericLowering, where they are not lowered. This CL moves
the checks earlier in the pipeline during JSNativeContextSpecialization
and JSCallReducer respectively, so that those operators are not
created at all in such cases and we bail out to the runtime instead.
Bug: v8:11564
Change-Id: I232ce7d9378730ae0cc8690e52fde840a484e069
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2807609
Commit-Queue: Maya Lekova <mslekova@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#73928}
Multivalue has been shipped for a while now, so it is time to remove
its experimental feature flag.
Additional change: Set kV8MaxWasmFunctionReturns to the old
kV8MaxWasmFunctionMultiReturns value.
Change-Id: I5c4d33b036e64a7221de17f0e97119bb0a036838
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2817790
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#73927}
With a shared cage, there's no easy way to recover an Isolate from a
heap pointer. Symbol::Description relies on RO symbols' description slot
being uncompressed so a Handle could point to it. This isn't possible
with a shared cage without going through TLS to get an Isolate for
Handle construction, so deprecate the method in favor of one that takes
an Isolate directly.
Bug: v8:11460
Change-Id: I69b2b7d77f4c00d0f58954cd80e22cba5ff222e3
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2802860
Commit-Queue: Shu-yu Guo <syg@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Dan Elphick <delphick@chromium.org>
Cr-Commit-Position: refs/heads/master@{#73924}
