These byte pointers (module_start and module_end) were only valid
during decoding. During instantiation or execution, they can get
invalidated by garbage collection.
This CL removes them from the WasmModule struct, and introduces a new
ModuleStorage struct as interface to the wasm wire bytes.
Since the storage is often needed together with the ModuleEnv, a new
ModuleStorageEnv struct holds both a ModuleEnv and a ModuleStorage.
The pointers in the ModuleStorage should never escape the live range of
this struct, as they might point into a SeqOneByteString or ArrayBuffer.
Therefore, the WasmInterpreter needs to create its own copy of the
whole module.
Runtime functions that previously used the raw pointers in WasmModule
(leading to memory errors) now have to use the SeqOneByteString in the
WasmCompiledModule.
R=titzer@chromium.org
BUG=chromium:669518
Review-Url: https://codereview.chromium.org/2540133002
Cr-Commit-Position: refs/heads/master@{#41388}
Make the AsmWasmBuilder drive the process of typing and potentially parsing
function bodies. This will allow us to keep only a single asm.js function's
AST in memory as we convert to WebAssembly.
This is needed to keep our memory footprint low.
Add some additional output to a few tests that's helpful to see which stage they fail at.
BUG= https://bugs.chromium.org/p/v8/issues/detail?id=4203
LOG=N
R=marja@chromium.org,adamk@chromium.org,aseemgarg@chromium.org,titzer@chromium.org
Review-Url: https://codereview.chromium.org/2398023002
Cr-Commit-Position: refs/heads/master@{#41372}
Improves performance in simple, single element case by 5% and in multiple
elements cases by 2%.
BUG=chromium:608675
LOG=N
Review-Url: https://codereview.chromium.org/2497243002
Cr-Commit-Position: refs/heads/master@{#41368}
Adds a bytecode_age field to BytecodeArray objects. This is incremented each
time the bytecode array is marked by GC, and reset to zero if the bytecode
is executed.
This is used to enable the CompilationCache for interpreted functions,
where Interpreted entries are evicted once the bytecode becomes old.
BUG=chromium:666275,v8:4680
Review-Url: https://codereview.chromium.org/2534763003
Cr-Commit-Position: refs/heads/master@{#41356}
MarkingParity was used to avoid performing an operation on an object if it was
marked multiple times. We no longer mark things multiple times, so this concept
is no longer required.
BUG=chromium:666275
Review-Url: https://codereview.chromium.org/2529173002
Cr-Commit-Position: refs/heads/master@{#41354}
This introduces three new types OtherCallable, CallableProxy (and OtherProxy),
and BoundFunction to make it possible to express Callable in the Type system.
It also forces all undetectable receivers to be Callable, which matches the
use case for undetectable, namely document.all (guarded by proper checks and
tests).
It also uses these new types to properly optimize instanceof (indirectly via
OrdinaryHasInstance) based on the type of the constructor and the object. So
we are able to constant-fold certain instanceof expressions based on types
and completely avoid the builtin call.
R=jarin@chromium.org
BUG=v8:5267
Review-Url: https://codereview.chromium.org/2535753004
Cr-Commit-Position: refs/heads/master@{#41345}
FunctionTemplateInfo::SetPrototypeProviderTemplate adds support for sharing
prototypes between several function templates. This is used to properly set up
Image.prototype and HTMLImageElement.protoype which should be equal according
to the spec.
BUG=chromium:2969
Review-Url: https://codereview.chromium.org/2531653002
Cr-Commit-Position: refs/heads/master@{#41343}
Removed a redundant check: If completion is not normal, then #iterator cannot be undefined.
Review-Url: https://codereview.chromium.org/2533803002
Cr-Commit-Position: refs/heads/master@{#41321}
If code is flushed on a SFI, we can still use the bytecode if it was compiled,
since this never gets flushed.
This fixes a DCHECK where we were trying to compile the bytecode multiple
times after the baseline code was flushed.
BUG=chromium:668133
Review-Url: https://codereview.chromium.org/2526243002
Cr-Commit-Position: refs/heads/master@{#41274}
The deprecated pipeline is used for asm.js only, where we forcibly
disable inlining anyways (for performance reasons), so inlining via
the AstGraphBuilder is essentially dead code by now, thus there's no
point in trying to keep that around in the code base.
Also nuke the test-run-inlining.cc file, which would require some heavy
surgery (for probably little benefit), and move the useful tests for
mjsunit tests instead.
BUG=v8:2206,v8:5657
R=yangguo@chromium.org
Review-Url: https://codereview.chromium.org/2527053002
Cr-Commit-Position: refs/heads/master@{#41245}
The handwritten-assembly implementations of both dispatcher and
generic stub have been replaced by Turbofan-generated stubs.
Review-Url: https://codereview.chromium.org/2523473002
Cr-Commit-Position: refs/heads/master@{#41188}
The new SourcePosition class allows for precise tracking of source positions including the stack of inlinings. This CL makes the cpu profiler use this new information. Before, the cpu profiler used the deoptimization data to reconstruct the inlining stack. However, optimizing compilers (especially Turbofan) can hoist out checks such that the inlining stack of the deopt reason and the inlining stack of the position the deoptimizer jumps to can be different (the old cpu profiler tests and the ones introduced in this cl produce such situations for turbofan). In this case, relying on the deoptimization info produces paradoxical results, where the reported position is before the function responsible is called. Even worse, https://codereview.chromium.org/2451853002/ combines the precise position with the wrong inlining stack from the deopt info, leading to completely wrong results.
Other changes in this CL:
- DeoptInlinedFrame is no longer needed, because we can compute the correct inlining stack up front.
- I changed the cpu profiler tests back to test situations where deopt checks are hoisted out in Turbofan and made them robust enough to handle the differences between Crankshaft and Turbofan.
- I reversed the order of SourcePosition::InliningStack to make it match the cpu profiler convention.
- I removed CodeDeoptEvent::position, as it is no longer used.
R=alph@chromium.org
BUG=v8:5432
Review-Url: https://codereview.chromium.org/2503393002
Cr-Commit-Position: refs/heads/master@{#41168}
By now the compilation pipeline is flexible enough to run module tests
against all variants, we should no longer choose unsupported compilers
for modules. It also fixes the predicate checking for functions being
"resumable" in the {AstNumberingVisitor} heuristic.
R=neis@chromium.org
BUG=v8:1569
Review-Url: https://codereview.chromium.org/2517143002
Cr-Commit-Position: refs/heads/master@{#41144}
Some minifiers use the pattern !function ... () for JS code that should
be immediately executed. This change recognizes that pattern and treats
it equally to parenthesized functions.
A bit more background info is in the referenced bug.
R=verwaest@chromium.org
BUG=v8:5643
Review-Url: https://codereview.chromium.org/2509143003
Cr-Commit-Position: refs/heads/master@{#41114}
It originates from the era where we used to run a separate preparse step
before parsing and store the function data. Now the usage of preparser
is something completely different, so this flag doesn't make sense any
more.
In addition, this way we get more test coverage for preparser (for small
scripts).
BUG=
Review-Url: https://codereview.chromium.org/2513563002
Cr-Commit-Position: refs/heads/master@{#41110}
Adds the marking logic to mark the young generation.
BUG=chromium:651354
Review-Url: https://codereview.chromium.org/2498583002
Cr-Commit-Position: refs/heads/master@{#41104}
Add bytecode for defining data properties, which initially just calls the runtime function.
BUG=v8:5624
Review-Url: https://codereview.chromium.org/2510743002
Cr-Commit-Position: refs/heads/master@{#41101}
This fixes the bogus implementation of the function in question and adds
test coverage for the deserialization of the corresponding flags from
the serialized scope info. Note that the tests so far only cover cases
where the module and the function contain context-allocated variables.
R=verwaest@chromium.org
TEST=cctest/test-parsing/AsmFunctionFlag
BUG=v8:5653
Review-Url: https://codereview.chromium.org/2507063004
Cr-Commit-Position: refs/heads/master@{#41093}
With this change, WebAssembly.Memory objects have backing stores allocated as an
8GB region where everything beyond the size of the Wasm heap is inaccessible.
GrowMemory is now implemented by changing the protection on the guard regions to
make the new portions of the heap accessible.
Guard pages are not enabled by default, but this change adds a flag and a test
variant to make sure we get test coverage on them.
BUG= https://bugs.chromium.org/p/v8/issues/detail?id=5277
Review-Url: https://codereview.chromium.org/2396433008
Cr-Commit-Position: refs/heads/master@{#41089}
Collect string feedback for compare operations. Without this,
functions which have a lot of string compare operations end up with
a high generic type percentage, and don't get optimized until very
late.
Currently TurboFan doesn't use this String feedback for compare
operations, but this could be done in future work if it is useful.
BUG=chromium:660947
Review-Url: https://codereview.chromium.org/2506013005
Cr-Commit-Position: refs/heads/master@{#41078}
The reasons are:
1) The names dictionaries in the feedback metadata seems to consume a lot of memory
and the idea didn't payoff.
2) The absence of a name parameter blocks data handlers support in LoadGlobalIC.
This CL reverts a part of r37278 (https://codereview.chromium.org/2096653003/).
BUG=chromium:576312, v8:5561
Review-Url: https://codereview.chromium.org/2510653002
Cr-Commit-Position: refs/heads/master@{#41046}
The new AccessorAssembler encapsulates all the functionality that's
specific to building LoadIC/StoreIC stubs.
There are two header files (accessor-assembler.h and
accessor-assembler-impl.h) so that clients of the assembler can include
the one, and subclassing assemblers can include the other.
Review-Url: https://codereview.chromium.org/2507733002
Cr-Commit-Position: refs/heads/master@{#41037}
This is in preparation for introducing more specialized
CodeStubAssembler subclasses. The state object can be handed
around, while the Assembler instances are temporary-scoped.
BUG=v8:5628
Original review: https://codereview.chromium.org/2498073002/
Review-Url: https://codereview.chromium.org/2502293002
Cr-Commit-Position: refs/heads/master@{#41028}
This brings the two utf-8 decoders (bulk + incremental) in line.
Technically, either behaviour was correct, since the utf-8 spec
demands incomplete utf-8 be handled, but does not specify how.
Unicode recommends that "the maximal subpart at that offset
should be replaced by a single U+FFFD," and with this change we
consistently do that. More details + spec references in the bug.
BUG=chromium:662822
Review-Url: https://codereview.chromium.org/2493143003
Cr-Commit-Position: refs/heads/master@{#41025}
Properties can be defined inside the object literal (ES6) or after
object creation. The behavior differes if there are accessors, interceptors
or proxies in the Object prototype chain.
These test cases assure we preserve correct behavior as we
improve performance of definitions in literals.
BUG=v8:5624
Review-Url: https://codereview.chromium.org/2501553002
Cr-Commit-Position: refs/heads/master@{#41024}
Adds a bytecode to set and retrieve the pending message. This avoids a
runtime call in finally blocks, and also ensures that TurboFan builds a
graph using the SetMessage / LoadMessage nodes instead of inserting a
runtime call.
BUG=chromium:662334
Review-Url: https://codereview.chromium.org/2501503005
Cr-Commit-Position: refs/heads/master@{#41023}
Reason for revert:
https://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20shared doesn't want to compile. Missing export annotation?
Original issue's description:
> [refactoring] Split CodeAssemblerState out of CodeAssembler
>
> This is in preparation for introducing more specialized
> CodeStubAssembler subclasses. The state object can be handed
> around, while the Assembler instances are temporary-scoped.
>
> BUG=v8:5628
TBR=ishell@chromium.org,mstarzinger@chromium.org,jkummerow@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5628
Review-Url: https://codereview.chromium.org/2504913002
Cr-Commit-Position: refs/heads/master@{#41018}
This is in preparation for introducing more specialized
CodeStubAssembler subclasses. The state object can be handed
around, while the Assembler instances are temporary-scoped.
BUG=v8:5628
Review-Url: https://codereview.chromium.org/2498073002
Cr-Commit-Position: refs/heads/master@{#41015}
This was causing array buffer views created by ValueDeserializer to have
uninitialized internal fields, which lead to crashes in layout tests when
Blink tried to read those fields.
For array buffers, JSArrayBuffer::Setup is responsible for this logic
(as well as initializing the V8 fields); this is similar to that.
The runtime already seems to correctly initialize these for script-created
array buffer views as well, which is why this issue was not detected sooner.
Review-Url: https://codereview.chromium.org/2498413002
Cr-Commit-Position: refs/heads/master@{#41014}
Inferred names are currently generated for FunctionLiterals but not generated
for ClassLiterals. Without them, DevTools does not have enough information to
make descriptive descriptions.
E.g.
var x = {y: class{}};
var a = new x.y();
console.log(a);
This shows "Object{}" when it could be more descriptive "x.y {}"
BUG=v8:5621
CQ_INCLUDE_TRYBOTS=master.tryserver.blink:linux_precise_blink_rel
Review-Url: https://codereview.chromium.org/2488193003
Cr-Commit-Position: refs/heads/master@{#41013}
Avoid using the iterator for arrays with fast elements where the iterator has
not been modified.
Only deals with the case where there is a single spread argument.
Improves the six-speed "spread" benchmark to 1.5x slower than baseline es5 implementation, compared to 19x slower previously.
BUG=v8:5511
Review-Url: https://codereview.chromium.org/2465253011
Cr-Commit-Position: refs/heads/master@{#40998}
This shares the pending_error_handler from the parser to the preparser, allowing the preparser to directly log errors to it. This removes LogMessage from the loggers. ParserLogger::LogMessage was already unused, so this also removes error info from the preparse data altogether.
BUG=
Review-Url: https://codereview.chromium.org/2502633002
Cr-Commit-Position: refs/heads/master@{#40984}
SourcePosition::InliningId() refers to a the new table DeoptimizationInputData::InliningPositions(), which provides the following data for every inlining id:
- The inlined SharedFunctionInfo as an offset into DeoptimizationInfo::LiteralArray
- The SourcePosition of the inlining. Recursively, this yields the full inlining stack.
Before the Code object is created, the same information can be found in CompilationInfo::inlined_functions().
If SourcePosition::InliningId() is SourcePosition::kNotInlined, it refers to the outer (non-inlined) function.
So every SourcePosition has full information about its inlining stack, as long as the corresponding Code object is known. The internal represenation of a source position is a positive 64bit integer.
All compilers create now appropriate source positions for inlined functions. In the case of Turbofan, this required using AstGraphBuilderWithPositions for inlined functions too. So this class is now moved to a header file.
At the moment, the additional information in source positions is only used in --trace-deopt and --code-comments. The profiler needs to be updated, at the moment it gets the correct script offsets from the deopt info, but the wrong script id from the reconstructed deopt stack, which can lead to wrong outputs. This should be resolved by making the profiler use the new inlining information for deopts.
I activated the inlined deoptimization tests in test-cpu-profiler.cc for Turbofan, changing them to a case where the deopt stack and the inlining position agree. It is currently still broken for other cases.
The following additional changes were necessary:
- The source position table (internal::SourcePositionTableBuilder etc.) supports now 64bit source positions. Encoding source positions in a single 64bit int together with the difference encoding in the source position table results in very little overhead for the inlining id, since only 12% of the source positions in Octane have a changed inlining id.
- The class HPositionInfo was effectively dead code and is now removed.
- SourcePosition has new printing and information facilities, including computing a full inlining stack.
- I had to rename compiler/source-position.{h,cc} to compiler/compiler-source-position-table.{h,cc} to avoid clashes with the new src/source-position.cc file.
- I wrote the new wrapper PodArray for ByteArray. It is a template working with any POD-type. This is used in DeoptimizationInputData::InliningPositions().
- I removed HInlinedFunctionInfo and HGraph::inlined_function_infos, because they were only used for the now obsolete Crankshaft inlining ids.
- Crankshaft managed a list of inlined functions in Lithium: LChunk::inlined_functions. This is an analog structure to CompilationInfo::inlined_functions. So I removed LChunk::inlined_functions and made Crankshaft use CompilationInfo::inlined_functions instead, because this was necessary to register the offsets into the literal array in a uniform way. This is a safe change because LChunk::inlined_functions has no other uses and the functions in CompilationInfo::inlined_functions have a strictly longer lifespan, being created earlier (in Hydrogen already).
BUG=v8:5432
Review-Url: https://codereview.chromium.org/2451853002
Cr-Commit-Position: refs/heads/master@{#40975}
In captured stack traces, all lines and columns must be 1-based.
Even though this makes things a bit ugly, we have to comply also for
wasm locations, where line and column encode function index and byte
offset (both are originally 0-based).
If we don't comply, the frontend might complain, as e.g. DevTools does.
BUG=chromium:659715
R=yangguo@chromium.org, kozyatinskiy@chromium.orgCC=titzer@chromium.org
Review-Url: https://codereview.chromium.org/2493943002
Cr-Commit-Position: refs/heads/master@{#40971}
This removes the POSSIBLY_EVAL_CALL call type, and instead uses OTHER_CALL
or WITH_CALL to decide whether to do the special LOOKUP_SLOT_CALL runtime
call to find the callee and possibly update the receiver with the with-object.
This means that eval calls out of 'with' blocks can now just do a normal
LdaLookupGlobalSlot operation, which can check the context chain for eval
extentions and fast-path the lookup if none exist.
BUG=661556
Review-Url: https://codereview.chromium.org/2487483004
Cr-Commit-Position: refs/heads/master@{#40965}
This replaces LOOKUP_SLOT_CALL with WITH_CALL, and relies on regular lookup-slot handling in variable load to support other lookup slots (variables resolved in the context of sloppy eval). This allows optimizations for such variable loads to kick in for calls as well. We only need special handling for function calls in the context of with, since it changes the receiver of the call from undefined/global to the with-object.
This currently doesn't yet make it work for the direct eval call itself, since the POSSIBLY_EVAL_CALL flag is also used to deal with direct eval later.
BUG=
Review-Url: https://codereview.chromium.org/2480253006
Cr-Commit-Position: refs/heads/master@{#40962}
Changes include:
- Adding V8_EXPORT macro for SnapshotCreator
- Removing outdated DCHECKs.
- Allow nullptr as external reference. This required a...
- Refactoring of hashmaps used by the serializer.
- Remove external references for counters. These are not used
anywhere for isolates that are being serialized.
- Put template infos into the partial snapshot cache.
- Remove unnecessary presubmit check for external references.
mksnapshot crashes if external references are missing.
R=jochen@chromium.org, vogelheim@chromium.org
BUG=chromium:617892
Review-Url: https://codereview.chromium.org/2490783004
Cr-Commit-Position: refs/heads/master@{#40949}
This adds a new ExternalPointer type, which is an Internal type that is
used for ExternalReferences and other pointer values, like the pointers
into the asm.js heap. It also adds a PointerConstant operator, which we
use to represents these raw constants (we can probably remove that
particular operator again once WebAssembly ships with the validator).
R=mvstanton@chromium.org
BUG=v8:5267,v8:5270
Review-Url: https://codereview.chromium.org/2494753003
Cr-Commit-Position: refs/heads/master@{#40923}
According to the spec data segments are allowed even if the memory size
is zero. However, if one of the data segments has a length greater than
0, then module instantiation should fail.
I also changed the exception type in LoadDataSegments to TypeError,
because that's the exception type for all exceptions which can happen
during instantiation.
R=titzer@chromium.org, rossberg@chromium.org
TEST=cctest/test-run-wasm-module/EmptyMemoryEmptyDataSegment, cctest/test-run-wasm-module/EmptyMemoryNonEmptyDataSegment
Review-Url: https://codereview.chromium.org/2483053005
Cr-Commit-Position: refs/heads/master@{#40922}
This CL moves all heap-allocated WASM data structures, both ones
that are bonafide JSObjects and ones that are FixedArrays only, into a
consistent place with consistent layout. Note that not all accessors are complete, and I haven't fully spread the new static typing goodness
to all places in the code.
R=ahaas@chromium.org,rossberg@chromium.org
CC=gdeepti@chromium.org,mtrofin@chromium.org,clemensh@chromium.org
BUG=
Review-Url: https://codereview.chromium.org/2490663002
Cr-Commit-Position: refs/heads/master@{#40913}
- A new runtime function (%create_resolving_functions) is installed to
call the CreateResolvingFunctions builtin from JS.
- Three new builtins are created - resolve and reject functions and a
third function that creates a new JSFunctions from these
resolve/reject builtins.
- The promise reject function is installed on the context temporarily
as internal_promise_reject. This should go away once we remove
PromiseSet.
BUG=v8:5343
Review-Url: https://codereview.chromium.org/2459283004
Cr-Commit-Position: refs/heads/master@{#40903}
TurboFan can create ConsStrings with empty first parts (for history on
this decision, see da27e0c886). Add a
fast-path for such cases in String::SlowFlatten.
BUG=
Review-Url: https://codereview.chromium.org/2489273002
Cr-Commit-Position: refs/heads/master@{#40885}
We seem to get some small wins from avoiding the Ldr bytecodes, probably due
to reduced icache pressure since there are less bytecode handlers. Replace
the Ldr bytecodes with Star lookahead inlined into the Lda versions.
Also fixes IsAccumulatorLoadWithoutEffects to include LdaContextSlot and
LdaCurrentContextSlot
BUG=v8:4280
Review-Url: https://codereview.chromium.org/2489513005
Cr-Commit-Position: refs/heads/master@{#40883}
... and make them applicable outside of CSA.
Nice bonus is that the assert condition instructions will now appear inside [Assert / ]Assert brackets.
BUG=
Review-Url: https://codereview.chromium.org/2489743002
Cr-Commit-Position: refs/heads/master@{#40869}
Adds an IsInterpreted() function to both SharedFunctionInfo and JSFunction.
This is used to fix the test-heap code-aging tests since Ignition doesn't
age code.
BUG=v8:4680
Review-Url: https://codereview.chromium.org/2481433002
Cr-Commit-Position: refs/heads/master@{#40868}
The Ldr[Named/Keyed]Property bytecodes are problematic for the deoptimizer when
inlining accessors in TurboFan. Remove them and replace with a Star lookahead
in the bytecode handlers for Lda[Named/Keyed]Property.
BUG=v8:4280
Review-Url: https://codereview.chromium.org/2485383002
Cr-Commit-Position: refs/heads/master@{#40860}
The bounds check in LoadDataSegment was off by one. I also improved the
error message, and fixed an issue where data was initialized even if
the bounds check failed.
In InstantiateModuleForTesting I allow instantiation of modules without
exports. This check was legacy code from the time where instantiation
and execution was still combined in a single function.
R=titzer@chromium.org, rossberg@chromium.org
TEST=cctest/test-run-wasm-module/InitDataAtTheUpperLimit
Review-Url: https://codereview.chromium.org/2486183002
Cr-Commit-Position: refs/heads/master@{#40856}
The spec defines that indirect calls in WebAssembly code should cause a
validation error if no function table exists.
The CL contains the following changes:
1) Throw a validation error for indirect calls if the function table
not exist.
2) Do not create TF nodes to throw a runtime error for indirect calls
if the function table does not exist.
3) Fix existing unit tests by creating a dummy function table.
4) Add new a new test which tests that indirect calls without function
table cause a validation error.
R=rossberg@chromium.orgCC=titzer@chromium.org
TEST=unittests/AstDecoderTest.IndirectCallsWithoutTableCrash
Review-Url: https://codereview.chromium.org/2484623002
Cr-Commit-Position: refs/heads/master@{#40852}
We recently allowed global constants in asm.js validated code.
When used in a return statement, these need to be of an allowed type.
BUG=660813
R=jpp@chromium.org,aseemgarg@chromium.org
Review-Url: https://codereview.chromium.org/2481103002
Cr-Commit-Position: refs/heads/master@{#40850}
We handle this case specially because otherwise we would have to do
complicated overflow detection.
R=titzer@chromium.org
TEST=cctest/test-run-wasm/RunWasmCompiled_LoadMaxUint32Offset
Review-Url: https://codereview.chromium.org/2490533003
Cr-Commit-Position: refs/heads/master@{#40844}
With this CL, we set the is_source_positions_enabled flag on CompilationInfo when
- a command line flag is enabled that requires Turbofan to preserve source position
information (e.g. --trace-deopt), and
- when profiling is enabled.
This also removes the --turbo-source-positions flag.
The goal is to eventually only track source position information when needed.
R=mstarzinger@chromium.org
BUG=v8:5439
Review-Url: https://codereview.chromium.org/2484163003
Cr-Commit-Position: refs/heads/master@{#40836}
This is an experiment to check whether the heuristics is still useful.
BUG=
Review-Url: https://codereview.chromium.org/2482163002
Cr-Commit-Position: refs/heads/master@{#40833}
The access check is generated as a:
- Equality check of an execution-time and a compile-time native contexts
for primitive receivers.
- Equality check of an execution-time and a compile-time native contexts
or equality check of a respective security tokens for global proxy receivers.
- No-op for other kinds of receivers.
BUG=v8:5561
Review-Url: https://codereview.chromium.org/2482913002
Cr-Commit-Position: refs/heads/master@{#40829}
This introduces two new bytecodes LdaModuleVariable and StaModuleVariable,
replacing the corresponding runtime calls.
Support in the bytecode graph builder exists only in the form of runtime calls.
BUG=v8:1569
Review-Url: https://codereview.chromium.org/2471033004
Cr-Commit-Position: refs/heads/master@{#40825}
The memory leak is fixed by calling the GC at the end of the tests. The GC collects the WasmModuleWrapper objects, which deallocates WasmModule c++ object. For the mjsunit tests the GC is already called because of the --invoke_weak_callbacks flag.
BUG=chromium:662388
Review-Url: https://codereview.chromium.org/2476643003
Cr-Commit-Position: refs/heads/master@{#40822}
Reason for revert:
Speculative revert for blocking roll:
https://codereview.chromium.org/2479233002/
Original issue's description:
> [wasm] Indirect calls without function table cause validation errors.
>
> The spec defines that indirect calls in WebAssembly code should cause a
> validation error if no function table exists.
>
> The CL contains the following changes:
> 1) Throw a validation error for indirect calls if the function table
> not exist.
> 2) Do not create TF nodes to throw a runtime error for indirect calls
> if the function table does not exist.
> 3) Fix existing unit tests by creating a dummy function table.
> 4) Add new a new test which tests that indirect calls without function
> table cause a validation error.
>
> R=rossberg@chromium.org
> CC=titzer@chromium.org
>
> TEST=unittests/AstDecoderTest.IndirectCallsWithoutTableCrash
TBR=rossberg@chromium.org,titzer@chromium.org,ahaas@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review-Url: https://codereview.chromium.org/2479283002
Cr-Commit-Position: refs/heads/master@{#40811}
This makes use of the newly introduced cell indices to speed up variable
accesses. Imports and local exports are now directly stored in (separate)
arrays. In the future, we may merge the two arrays into a single one, or
even into the module context.
This CL also replaces the LoadImport and LoadExport runtime functions with
a single LoadVariable taking a variable index as argument (rather than a
name).
BUG=v8:1569
Review-Url: https://codereview.chromium.org/2465283004
Cr-Commit-Position: refs/heads/master@{#40808}
This
- removes the ParserRecorder base class,
- devirtualizes the LogFunction and LogMessage functions,
- reuses the SingletonLogger for all preparser calls
In a subsequent step the preparser should probably log directly to the CompleteParserRecorder rather than indirectly through the singleton logger...
BUG=
Review-Url: https://codereview.chromium.org/2474393003
Cr-Commit-Position: refs/heads/master@{#40803}
The spec defines that indirect calls in WebAssembly code should cause a
validation error if no function table exists.
The CL contains the following changes:
1) Throw a validation error for indirect calls if the function table
not exist.
2) Do not create TF nodes to throw a runtime error for indirect calls
if the function table does not exist.
3) Fix existing unit tests by creating a dummy function table.
4) Add new a new test which tests that indirect calls without function
table cause a validation error.
R=rossberg@chromium.orgCC=titzer@chromium.org
TEST=unittests/AstDecoderTest.IndirectCallsWithoutTableCrash
Review-Url: https://codereview.chromium.org/2484623002
Cr-Commit-Position: refs/heads/master@{#40802}
Drive-by-fix 1: be more precise in machine representations for
AllocateNameDictionary to make --turbo_verify_machine_graph happy.
Drive-by-fix 2: Improve graph verifier output by printing input
representation.
BUG=
Review-Url: https://codereview.chromium.org/2475913002
Cr-Commit-Position: refs/heads/master@{#40797}
This patch fixes two bugs in V8 to allow the global object to have a frozen proto:
- The immutable prototype map check is done on the map of the "real receiver",
the one that's found after the hidden prototype traversal, rather than
the object that SetPrototype is called on.
- The immutable prototype bit from the ObjectTemplate used to instantiate
the global object, as passed to Context::New, is respected when instantiating
the global object.
R=adamk
BUG=v8:5149
Review-Url: https://codereview.chromium.org/2474843003
Cr-Commit-Position: refs/heads/master@{#40778}
This removes the deprecated flag in question which has been enabled by
default a while ago. All components can by now deal with activations of
a single function being mixed between Ignition and other compilers. The
maintenance overhead to support a mode that clears bytecode is no longer
warranted.
R=rmcilroy@chromium.org
BUG=v8:4280
Review-Url: https://codereview.chromium.org/2475203003
Cr-Commit-Position: refs/heads/master@{#40776}
Parameters of a lazily parsed function used to be parsed eagerly, and parameter
handling was split between Parser::ParseFunctionLiteral and
ParseEagerFunctionBody, leading to inconsistencies.
After this CL, we preparse (lazy parse) the parameters of lazily parsed
functions.
(For arrow functions, we cannot do that ofc.)
This is needed for later features (PreParser with scope analysis).
-- CL adapted from marja's https://codereview.chromium.org/2411793003/
BUG=
Review-Url: https://codereview.chromium.org/2472063002
Cr-Commit-Position: refs/heads/master@{#40771}
Some accessors requires little to no computation at all, its result can be
cached in a private property, avoiding the call overhead.
Calls to the getter are translated into a cheap property load.
Follow-on to crrev.com/2347523003, from peterssen@google.com
BUG=chromium:634276, v8:5548
Review-Url: https://codereview.chromium.org/2405213002
Cr-Commit-Position: refs/heads/master@{#40765}
With an instance of CodeStubArguments, builtin stub generators can generate code
that accesses the receiver passed to the builtin, as well as access and iterate
over the variable number of arguments that are passed in.
Review-Url: https://codereview.chromium.org/2469273003
Cr-Commit-Position: refs/heads/master@{#40726}
Removed a wrong condition test in TwoByteExternalBufferedStream. This changed fixes errors that may occur under some conditions.
Review-Url: https://codereview.chromium.org/2469723002
Cr-Commit-Position: refs/heads/master@{#40722}
The wasm interpreter crashed because it interpreted the table of
br_table as a table of uint8, but according to the spec it is a table of
varint32. Therefore the wasm interpreter misinterpreted 0x80 0x00 as 128
and not as 0, which caused a crash.
R=tizer@chromium.org
BUG=chromium:660262
TEST=cctest/test-run-wasm/RunWasmInterpreted_Regression_660262
Review-Url: https://codereview.chromium.org/2463063002
Cr-Commit-Position: refs/heads/master@{#40708}
This reduces per-scope overhead from minimally 6 words to 2 words, with one additional pointer per entry, rather than an average of 2 per entry for larger-than-4 element lists. For temp zone parsed functions it additionally makes the declaration-list actually freeable.
This introduces ThreadedList to implement the details of dealing with such a list.
BUG=v8:5209
Review-Url: https://codereview.chromium.org/2457393003
Cr-Commit-Position: refs/heads/master@{#40703}
To enable the global object prototype chain to be frozen, all objects
in the chain need to be marked as immutable prototype exotic objects.
However, a bug in the previous implementation of immutable prototype
exotic objects left the check in place when initially setting up the
object, which made it impossible to allow inheritance chains. This
patch removes that mistaken check.
BUG=v8:5149
Review-Url: https://codereview.chromium.org/2449163004
Cr-Commit-Position: refs/heads/master@{#40702}
Reason for revert:
Causes performance regressions (up to 10% on the "IC" bucket). :-(
Original issue's description:
> [ic] Experiment: disable map-specific handler cache.
>
> IC data handlers support most of the hot cases nowdays. Let's see if
> the map-specific code cache still help us to improve things.
>
> BUG=v8:5561
TBR=ishell@chromium.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=v8:5561
Review-Url: https://codereview.chromium.org/2474653002
Cr-Commit-Position: refs/heads/master@{#40701}
In the process, add a more general mechanism for passing around
and amending list of CodeStubAssembler Variables. That change
makes it possible to more easily add Variables to loops that are
generated by utility functions, e.g. BuildFastLoop.
LOG=N
Review-Url: https://codereview.chromium.org/2461363002
Cr-Commit-Position: refs/heads/master@{#40700}
This is preparation for using TF to create builtins that handle variable number of
arguments and have to remove these arguments dynamically from the stack upon
return.
The gist of the changes:
- Added a second argument to the Return node which specifies the number of stack
slots to pop upon return in addition to those specified by the Linkage of the
compiled function.
- Removed Tail -> Non-Tail fallback in the instruction selector. Since TF now should
handles all tail-call cases except where the return value type differs, this fallback
was not really useful and in fact caused unexpected behavior with variable
sized argument popping, since it wasn't possible to materialize a Return node
with the right pop count from the TailCall without additional context.
- Modified existing Return generation to pass a constant zero as the additional
pop argument since the variable pop functionality
LOG=N
Review-Url: https://codereview.chromium.org/2446543002
Cr-Commit-Position: refs/heads/master@{#40699}
Reason for revert:
Seems to break arm64 sim debug and blocks roll:
https://build.chromium.org/p/client.v8.ports/builders/V8%20Linux%20-%20arm64%20-%20sim%20-%20debug/builds/3294
Original issue's description:
> [turbofan] Support variable size argument removal in TF-generated functions
>
> This is preparation for using TF to create builtins that handle variable number of
> arguments and have to remove these arguments dynamically from the stack upon
> return.
>
> The gist of the changes:
> - Added a second argument to the Return node which specifies the number of stack
> slots to pop upon return in addition to those specified by the Linkage of the
> compiled function.
> - Removed Tail -> Non-Tail fallback in the instruction selector. Since TF now should
> handles all tail-call cases except where the return value type differs, this fallback
> was not really useful and in fact caused unexpected behavior with variable
> sized argument popping, since it wasn't possible to materialize a Return node
> with the right pop count from the TailCall without additional context.
> - Modified existing Return generation to pass a constant zero as the additional
> pop argument since the variable pop functionality
>
> LOG=N
TBR=bmeurer@chromium.org,mstarzinger@chromium.org,epertoso@chromium.org,danno@chromium.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
NOPRESUBMIT=true
Review-Url: https://codereview.chromium.org/2473643002
Cr-Commit-Position: refs/heads/master@{#40691}
IC data handlers support most of the hot cases nowdays. Let's see if
the map-specific code cache still help us to improve things.
BUG=v8:5561
Review-Url: https://codereview.chromium.org/2462973003
Cr-Commit-Position: refs/heads/master@{#40685}
We only need included categories list, excluded categories list will only work
if we use regular expression in categories list, which is not supported in V8.
TBR=jochen@chromium.org
Review-Url: https://codereview.chromium.org/2462143002
Cr-Commit-Position: refs/heads/master@{#40681}
This is preparation for using TF to create builtins that handle variable number of
arguments and have to remove these arguments dynamically from the stack upon
return.
The gist of the changes:
- Added a second argument to the Return node which specifies the number of stack
slots to pop upon return in addition to those specified by the Linkage of the
compiled function.
- Removed Tail -> Non-Tail fallback in the instruction selector. Since TF now should
handles all tail-call cases except where the return value type differs, this fallback
was not really useful and in fact caused unexpected behavior with variable
sized argument popping, since it wasn't possible to materialize a Return node
with the right pop count from the TailCall without additional context.
- Modified existing Return generation to pass a constant zero as the additional
pop argument since the variable pop functionality
LOG=N
Review-Url: https://codereview.chromium.org/2446543002
Cr-Commit-Position: refs/heads/master@{#40678}
This enables Ignition unconditionally for all code that is destined for
optimization with TurboFan. This ensures all optimization attempts will
go through the BytecodeGraphBuilder and that the AstGraphBuilder pipe is
dried out in practice.
patch from issue 2427953002 at patchset 120001 (http://crrev.com/2427953002#ps120001)
R=mvstanton@chromium.org,rmcilroy@chromium.org
Review-Url: https://codereview.chromium.org/2453973004
Cr-Commit-Position: refs/heads/master@{#40663}
These are added to the sampler stack trace when RCS are
enabled.
Resource name for a RCS frame is reported as "V8Runtime".
Counter names match ones from src/counters.h
BUG=chromium:660428
Review-Url: https://codereview.chromium.org/2461003002
Cr-Commit-Position: refs/heads/master@{#40658}
The majority of context slot accesses are to the local context (current context
register and depth 0), so this adds bytecodes to optimise for that case.
This cuts down bytecode size by roughly 1% (measured on Octane and Top25).
Review-Url: https://codereview.chromium.org/2459513002
Cr-Commit-Position: refs/heads/master@{#40641}
The reasons are:
1) Type feedback vectors are not shared between different native contexts and
therefore the IC handler created for one native context will not be reused
in other native context.
2) Access rights revocation is not supported at all, therefore given (1) once
we pass the access check we don't have to check access rights again.
BUG=v8:5561
Review-Url: https://codereview.chromium.org/2455953002
Cr-Commit-Position: refs/heads/master@{#40627}
