We need to change WasmExportedFunction to call imported functions via
the import table, so there will be no embedded call target.
This also removes the necessity to generate an unreachable call after
the runtime call for js-incompatible signatures.
R=titzer@chromium.org
Bug: chromium:843563,v8:6668
Change-Id: I82cb31930f6b61ad59fde63a8c5ae631da3d1a14
Reviewed-on: https://chromium-review.googlesource.com/1063771
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53239}
D8 enables the Wasm trap handler by default now, but we need to make sure the
older bounds check case still gets test coverage too, as bounds checks will
continue to be a supported configuration.
Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
Change-Id: I5b0bdded6929a9b3a8480e87d038398b8d2a0fd8
Reviewed-on: https://chromium-review.googlesource.com/1048835
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Eric Holk <eholk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53078}
This changes the baseline of an inspector test setting breakpoints
within an asm.js module while the module is being executed. With the
validator it is not supported to switch from active WebAssembly code
back to debuggable interpreter code. Hence some previously expected
breakpoints no longer fire, the behavior is consistent across all
configurations now though.
R=yangguo@chromium.org
TEST=inspector/debugger/asm-js-breakpoint-during-exec
BUG=v8:6166
Change-Id: Ie1bb62fa6df28b10336b4cb5d381d2141eec356c
Reviewed-on: https://chromium-review.googlesource.com/608977
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47301}
Removes the pathways to use Full-Codegen from compiler.cc. Also removes all
paths to optimize using AstGraphBuilder, which relies on Full-codegen.
Cleans up ast-numbering, runtime-profiler and some runtime functions to
remove now dead code.
This makes Full-codegen and AstGraphBuilder dead, but doesn't remove their
code yet, that will be done in a followup CL to keep things reviewable.
BUG=v8:6409
Change-Id: I3901ff17d960b2bb084cef0cb39fa16cb8419881
Reviewed-on: https://chromium-review.googlesource.com/583328
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47277}
Note that this also renames the existing "asm_wasm" variant to use the
more appropriate "stress_asm_wasm" name.
R=rmcilroy@chromium.org
BUG=v8:6409
Cq-Include-Trybots: master.tryserver.v8:v8_linux_noi18n_rel_ng
Change-Id: I1f9550cd03874c678f4583047a4e123a6f090250
Reviewed-on: https://chromium-review.googlesource.com/584879
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46937}
Nop bytecodes are required only for break locations in debugger. Since nop bytecode doesn't change program state we can remove all of them.
There are at least two changes which this CL produce:
- we don't provide break position when we load local variable (still provide when load variable from global),
- we don't provide break position for statements without actual break positions (e.g. "a;") - these expressions should be super rare and user always can set breakpoint before or after this statement.
More details in one pager: https://docs.google.com/a/google.com/document/d/1JXlQpfMa9vRojbE272b6GMBbrfh6m_00135iAUOJEz8/edit?usp=sharing
Bug: v8:6425
Change-Id: I4aee73d497a84f7b5d89caa6dda6d3060567dfda
Reviewed-on: https://chromium-review.googlesource.com/543161
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46742}
Goal of this CL: explicit return from non-async function has position after
return expression as return position (will unblock [1]).
BytecodeArrayBuilder has SetStatementPosition and SetExpressionPosition methods.
If one of these methods is called then next generated bytecode will get passed
position. It's general treatment for most cases.
Unfortunately it doesn't work for Returns:
- debugger requires source positions exactly on kReturn bytecode in stepping
implementation,
- BytecodeGenerator::BuildReturn and BytecodeGenerator::BuildAsyncReturn
generates more then one bytecode and general solution will put return position
on first generated bytecode,
- it's not easy to split BuildReturn function into two parts to allow something
like following in BytecodeGenerator::VisitReturnStatement since generated
bytecodes are actually controlled by execution_control().
..->BuildReturnPrologue();
..->SetReturnPosition(stmt);
..->Return();
In this CL we pass ReturnStatement through ExecutionControl and use it for
position when we emit return bytecode right here.
So this CL only will improve return position for returns inside of non-async
functions, I'll address async functions later.
[1] https://chromium-review.googlesource.com/c/543161/
Change-Id: Iede512c120b00c209990bf50c20e7d23dc0d65db
Reviewed-on: https://chromium-review.googlesource.com/560738
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46687}
The variant in question was intended to test Crankshaft, which is being
deprecated. Note that the variants 'nooptimization' and 'fullcode' still
test configuration where TurboFan is not active.
R=machenbach@chromium.org
BUG=v8:6408
Cq-Include-Trybots: master.tryserver.v8:v8_linux_noi18n_rel_ng
Change-Id: I587c3eee7ba511dfc270aab66b546d2532bc635f
Reviewed-on: https://chromium-review.googlesource.com/528133
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45785}
The collection builtins (Map, Set, WeakMap, WeakSet) are still written
in JavaScript and make heavy use of %_ClassOf, which is kind of
expensive compared to a simple instance type check. Change that to use
simple instance type checks instead.
R=jarin@chromium.org
BUG=v8:6261,v8:6278,v8:6344
Review-Url: https://codereview.chromium.org/2814773005
Cr-Original-Commit-Position: refs/heads/master@{#45106}
Committed: 28170099fd
Review-Url: https://codereview.chromium.org/2814773005
Cr-Commit-Position: refs/heads/master@{#45124}
The collection builtins (Map, Set, WeakMap, WeakSet) are still written
in JavaScript and make heavy use of %_ClassOf, which is kind of
expensive compared to a simple instance type check. Change that to use
simple instance type checks instead.
R=jarin@chromium.org
BUG=v8:6261,v8:6278,v8:6344
Review-Url: https://codereview.chromium.org/2814773005
Cr-Commit-Position: refs/heads/master@{#45106}
This adds test coverage for the source position tracking of function
table calls in asm.js and fixes the discovered issues. It also fixes
function start positions (used by errors thrown at stack checks).
R=clemensh@chromium.org
TEST=mjsunit/wasm/asm-wasm-stack
BUG=v8:6127,v8:6166
Change-Id: Id6ab6dc72bcedb0d838eed315e2a05fbc59039f4
Reviewed-on: https://chromium-review.googlesource.com/465949
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44348}
This flushed out a number of bugs.
To reproduce, remove the inspector.status file entries, build with GN,
and run `tools/run-tests.py --gn --exhaustive-variants inspector`.
R=mstarzinger@chromium.org
BUG=v8:6165,v8:6166,v8:6167,v8:6168,v8:6170,v8:6171
Review-Url: https://codereview.chromium.org/2777413005
Cr-Commit-Position: refs/heads/master@{#44242}
With this change, WebAssembly.Memory objects have backing stores allocated as an
8GB region where everything beyond the size of the Wasm heap is inaccessible.
GrowMemory is now implemented by changing the protection on the guard regions to
make the new portions of the heap accessible.
Guard pages are not enabled by default, but this change adds a flag and a test
variant to make sure we get test coverage on them.
BUG= https://bugs.chromium.org/p/v8/issues/detail?id=5277
Review-Url: https://codereview.chromium.org/2396433008
Cr-Commit-Position: refs/heads/master@{#41089}
- added inspector test suite definition in testcfg.py
- added JS infrastructure for tests in protocol-test.js
BUG=chromium:635948
R=dgozman@chromium.org,alph@chromium.org
Review-Url: https://codereview.chromium.org/2370743003
Cr-Commit-Position: refs/heads/master@{#39895}
