This switches Math.log to use an fdlibm based version of log, imported
as base::ieee754::log, and use that consistently everywhere, i.e. change
the Float64Log TurboFan operators on Intel to use the C++ implementation
as well (same for Crankshaft).
R=yangguo@chromium.org
BUG=v8:5065,v8:5086
Review-Url: https://codereview.chromium.org/2053893003
Cr-Commit-Position: refs/heads/master@{#36880}
Ideally we would have a dedicated MachineRepresentation for Smis during
representation selection and use that to properly optimize ObjectIsSmi
(and other ObjectIs<Type> predicates), but that will take some time to
get that done. So in the meantime we can just do simple (local) strength
reduction on ObjectIsSmi to avoid Smi checks in the simplest cases at
least.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2047213002
Cr-Commit-Position: refs/heads/master@{#36809}
Passing in the isolate and pointer compare the instnance against the
corresponding constant is always faster than decoding the instance types.
BUG=
Review-Url: https://codereview.chromium.org/2028983002
Cr-Commit-Position: refs/heads/master@{#36744}
This is mostly about DCHECKs. Enabling some requires a few
changes to tests that were not careful about types.
BUG=
Review-Url: https://codereview.chromium.org/2033703002
Cr-Commit-Position: refs/heads/master@{#36734}
This moves processing of jumps out of bytecode array builder and into
bytecode array writer. This simplifies the pipeline by avoiding having
to flush for offset and patch up offsets in bytecode array builder based
on what was emitted by the bytecode array writer.
This also enables future refactorings to add dead code elimination back
into the pipeline, and move processing of scalable operand sizes to the
end of the pipeline (in the bytecode array writer) rather than having to
deal with scalable operand types throughout pipeline.
BUG=v8:4280,chromium:616064
Review-Url: https://codereview.chromium.org/2035813002
Cr-Commit-Position: refs/heads/master@{#36716}
- Adds names for float registers to RegisterConfiguration and uses them
when we have the MachineRepresentation.
LOG=N
BUG=v8:4124
Review-Url: https://codereview.chromium.org/2030143002
Cr-Commit-Position: refs/heads/master@{#36712}
These speculative binary operators are simplified operators and should
not need a frame state themselves. These eager bailout points can by now
be found via checkpoints in the graph, whereas frame states attached to
nodes directly should always represent lazy bailout points.
R=jarin@chromium.org
BUG=v8:5021
Review-Url: https://codereview.chromium.org/2037673002
Cr-Commit-Position: refs/heads/master@{#36705}
Introduce a dedicated Float64Log machine operator, that is either
implemented by a direct C call or by platform specific code, i.e.
using the FPU on x64 and ia32.
This operator is used to implement Math.log as a proper TurboFan
builtin on top of the CodeStubAssembler.
Also introduce a NumberLog simplified operator on top of Float64Log
and use that for the fast inline path of Math.log inside TurboFan
optimized code.
BUG=v8:5065
Review-Url: https://codereview.chromium.org/2029413005
Cr-Commit-Position: refs/heads/master@{#36703}
This removes the frame state input representing the before-state from
nodes performing property accesses. These frame states can by now be
found via checkpoints in the graph.
R=jarin@chromium.org
BUG=v8:5021
Review-Url: https://codereview.chromium.org/2034673002
Cr-Commit-Position: refs/heads/master@{#36699}
A value in unittests/Bytecodes.DecodeBytecodeAndOperands was 16 bit
instead of 8 bit. This was causing test to fail on big endian machines.
BUG=
Review-Url: https://codereview.chromium.org/2030063002
Cr-Commit-Position: refs/heads/master@{#36698}
VC++ complains about truncation of integer constants despite use of
static_cast. This isn't very helpful as it gives no way of suppressing
the warning in code, so this change suppresses it on the command line.
Additionally, the linker complains about importing of locally defined
functions in component builds. Until this is fixed the warnings should
be suppressed.
NOTRY=true
Review-Url: https://codereview.chromium.org/2028353004
Cr-Commit-Position: refs/heads/master@{#36695}
This introduces optimized number operations based on type feedback.
Summary of changes:
1. Typed lowering produces SpeculativeNumberAdd/Subtract for JSAdd/Subtract if
there is suitable feedback. The speculative nodes are connected to both the
effect chain and the control chain and they retain the eager frame state.
2. Simplified lowering now executes in three phases:
a. Propagation phase computes truncations by traversing the graph from uses to
definitions until checkpoint is reached. It also records type-check decisions
for later typing phase, and computes representation.
b. The typing phase computes more precise types base on the speculative types (and recomputes
representation for affected nodes).
c. The lowering phase performs lowering and inserts representation changes and/or checks.
3. Effect-control linearization lowers the checks to machine graphs.
Notes:
- SimplifiedLowering will be refactored to have handling of each operation one place and
with clearer input/output protocol for each sub-phase. I would prefer to do this once
we have more operations implemented, and the pattern is clearer.
- The check operations (Checked<A>To<B>) should have some flags that would affect
the kind of truncations that they can handle. E.g., if we know that a node produces
a number, we can omit the oddball check in the CheckedTaggedToFloat64 lowering.
- In future, we want the typer to reuse the logic from OperationTyper.
BUG=v8:4583
LOG=n
Review-Url: https://codereview.chromium.org/1921563002
Cr-Commit-Position: refs/heads/master@{#36674}
This removes the frame state input representing the before-state from
nodes having the {JSCallFunction} or {JSCallConstruct} operator. These
frame states can by now be found via checkpoints in the graph.
R=bmeurer@chromium.org
BUG=v8:5021
Review-Url: https://codereview.chromium.org/2025573003
Cr-Commit-Position: refs/heads/master@{#36669}
We use StringFromCharCode to optimize calls to String.fromCharCode with
a single Number argument for now. We will use it to also implement the
charAt method on the String prototype.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2037453003
Cr-Commit-Position: refs/heads/master@{#36668}
We already implemented CPU time for OS X and POSIX, this path is a
follow up for the implementation on Windows.
BUG=v8:5000
LOG=n
Review-Url: https://codereview.chromium.org/1977983003
Cr-Commit-Position: refs/heads/master@{#36656}
A few values were missing use of a macro causing test to fail on big
endian machines.
BUG=
Review-Url: https://codereview.chromium.org/2024123002
Cr-Commit-Position: refs/heads/master@{#36645}
This adds a very simplistic reduction of {CheckPoint} nodes via the new
{CheckpointElimination}, eliminating redundant check points that appear
in an effect chain of operations that are all {kNoWrite}. Such a chain
allows an arbitrary check point to be chosen. The current approach will
end up choosing the first one for all deopts in the chain.
R=bmeurer@chromium.org
TEST=unittests/CheckpointEliminationTest.CheckPointChain
BUG=v8:5021
Review-Url: https://codereview.chromium.org/2022913003
Cr-Commit-Position: refs/heads/master@{#36634}
This patch enables the following transformations in the instruction
selector:
| Before | After |
|------------------+------------------------|
| and x3, x1, #0x1 | tb{,n}z w1, #0, #+0x78 |
| cmp x3, #0x0 | |
| b.{eq,ne} #+0x80 | |
|------------------+------------------------|
| cmp x0, #0x0 | cb{,n}z x0, #+0x48 |
| b.{eq,ne} #+0x4c | |
I have not seen these patterns beeing generated by turbofan, however the
stubs hit these cases frequently. A particular reason is that we are
turning operations that check for a Smi into a single `tbz`.
As a concequence, the interpreter is affected thanks to inlining
turbofan stubs into it's bytecode handlers. I have noticed the size of
the interpreter was reduced by 200 instructions.
BUG=
Review-Url: https://codereview.chromium.org/2022073002
Cr-Commit-Position: refs/heads/master@{#36632}
Rename some methods to reflect the fact that there are multiple FP
machine representations.
LOG=N
BUG=v8:4124
Review-Url: https://codereview.chromium.org/2013193002
Cr-Commit-Position: refs/heads/master@{#36552}
Adding optional operators for FNeg for WebAssembly, as the current implementation was significantly suboptimal for ARM.
Review-Url: https://codereview.chromium.org/2011303002
Cr-Commit-Position: refs/heads/master@{#36544}
We get less "pollution" of type feedback if we have one vector per native
context, rather than one for the whole system. This CL moves the vector
appropriately.
BUG=
Review-Url: https://codereview.chromium.org/1906823002
Cr-Commit-Position: refs/heads/master@{#36539}
Caching nodes with mutable inputs is a bad idea and already blew up
twice now, so in order to avoid further breakage, let's kill the
EmptyFrameState caching on JSGraph completely and only cache the empty
state values there.
We can remove the hacking from JSTypedLowering completely once we have
the PlainPrimitiveToNumber in action.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2006423003
Cr-Commit-Position: refs/heads/master@{#36511}
This change introduces five fused bytecodes for common bytecode
sequences on popular websites. These are LdrNamedProperty,
LdrKeyedProperty, LdrGlobal, LdrContextSlot, and LdrUndefined. These
load values into a destination register operand instead of the
accumulator. They are emitted by the peephole optimizer.
BUG=v8:4280
LOG=N
Review-Url: https://codereview.chromium.org/1985753002
Cr-Commit-Position: refs/heads/master@{#36507}
This interpreter directly decodes and executes WASM binary code for
the purpose of supporting low-level debugging. It is not currently
integrated into the main WASM implementation.
R=ahaas@chromium.org,clemensh@chromium.org,rossberg@chromium.org,binji@chromium.org
BUG=
Review-Url: https://codereview.chromium.org/1972153002
Cr-Commit-Position: refs/heads/master@{#36497}
Moved globals offsets calculation to the wasm module decoder, since
this is a property of the module, not of each instance.
Qualified as "const" references to WasmModule outside of the decoder
and some test situations.
BUG=
Review-Url: https://codereview.chromium.org/2005933003
Cr-Commit-Position: refs/heads/master@{#36484}
This fixes the SharedFunctionInfo::num_literals field for global builtin
functions (e.g. {Object} and friends) to be accurate. The field was not
being updated by Runtime_SetCode. It also removes the dangerous and by
now obsolete JSFunction::NumberOfLiterals accessor.
R=mvstanton@chromium.org
Review-Url: https://codereview.chromium.org/2007943002
Cr-Commit-Position: refs/heads/master@{#36480}
This patch is a follow up to https://codereview.chromium.org/1972103002/
adding support for the `Operand_R_LSL_I` addressing mode to loads and
stores for ARM.
Just as the ARM64 implementation, the shift + load/store pattern is only
really relevant to the interpreter. For this reason, this patch does not
add support for the other addressing modes (`R_LSR_I`, `R_ASR_I` and
`R_ROR_I`) as I haven't seen those pattern being generated. Additionally,
the optimization is restricted 32 bit loads and stores.
kind = BYTECODE_HANDLER
name = Star
compiler = turbofan
Instructions (size = 40)
0x22a5f860 0 e2851001 add r1, r5, #1
0x22a5f864 4 e19610d1 ldrsb r1, [r6, +r1]
0x22a5f868 8 e1a0200b mov r2, fp
0x22a5f86c 12 e7820101 str r0, [r2, +r1, lsl #2]
^^^^^^^^^^^^^^^^^^^^^^^^^
0x22a5f870 16 e2855002 add r5, r5, #2
0x22a5f874 20 e7d61005 ldrb r1, [r6, +r5]
0x22a5f878 24 e7981101 ldr r1, [r8, +r1, lsl #2]
^^^^^^^^^^^^^^^^^^^^^^^^^
0x22a5f87c 28 e12fff11 bx r1
BUG=
Review-Url: https://codereview.chromium.org/1974263002
Cr-Commit-Position: refs/heads/master@{#36381}
The MLS instruction is available in all ARMv7 devices, and in no ARMv6
devices, aside from the usual ARMv6T2 caveat. We don't need a separate
feature flag for it.
BUG=
Review-Url: https://codereview.chromium.org/1988133004
Cr-Commit-Position: refs/heads/master@{#36378}
Previously, CodeStubAssembler macros performing FixedArray element accesses had
to compute offsets to elements explicitly with a fair amount of duplicated
code. Furthermore, any peephole optimizations that could produce better code--
like recognizing constant indices or combining array index computation with Smi
untagging--were also duplicated.
This change factors the code to compute FixedArray index offsets into a common
routine in the CodeStubAssembler that applies standard peephole optimizations to
all accesses. In order to do this, it also introduces limited introspection into
the up-until-now opaque Node* type exported from code-assembler.h, allowing
Nodes to be queried whether they are constant and extracting their constant
value in that case.
Review-Url: https://codereview.chromium.org/1989363004
Cr-Commit-Position: refs/heads/master@{#36370}
In order to support compiling to baseline on return we need to be able to
return to the actual return address. With this change this is what the
Return bytecode now does, removing the need for the
InterpreterExitTrampoline.
This change also removes the InterpreterNotifyDeoptXXX builtins and
unifies FCG and Igntion to both use NotifyDeoptXXX. As part of this
change, FullCodegenerator::State is moved to Deoptimize::BailoutState.
BUG=v8:4280
LOG=N
Committed: https://crrev.com/34c9626e2ee56fe805de549697ca5323aed7cb66
Cr-Commit-Position: refs/heads/master@{#36288}
Review-Url: https://codereview.chromium.org/1969423002
Cr-Commit-Position: refs/heads/master@{#36310}
Remove dead code to optimize Int64Constants as branch/select conditions,
because we either have tagged booleans or bits represented as word32.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/1994533002
Cr-Commit-Position: refs/heads/master@{#36308}
The type guard should never be used after the effect/control
linearization pass, so making it a simplified operator better
expresses the intended use. Also this way none of the common
operators actually has any dependency on the type system.
Drive-by-fix: Properly print the type parameter to a TypeGuard operator.
BUG=chromium:612142
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/1994503002
Cr-Commit-Position: refs/heads/master@{#36304}
Makes LogicalNot bytecode not do the ToBoolean operation, and add support in the
peephole optimizer to choose between the appropriate bytecode depending upon
whether the previous bytecode emitted a boolean or not.
BUG=v8:4280
LOG=N
Review-Url: https://codereview.chromium.org/1985033002
Cr-Commit-Position: refs/heads/master@{#36295}
Reason for revert:
Breaks
https://build.chromium.org/p/client.v8.ports/builders/V8%20Linux%20-%20arm%20-%20sim/builds/619
Might only affect pure release builds?
Original issue's description:
> [Interpreter] Remove InterpreterExitTrampoline and replace with returning to the entry trampoline.
>
> In order to support compiling to baseline on return we need to be able to
> return to the actual return address. With this change this is what the
> Return bytecode now does, removing the need for the
> InterpreterExitTrampoline.
>
> This change also removes the InterpreterNotifyDeoptXXX builtins and
> unifies FCG and Igntion to both use NotifyDeoptXXX. As part of this
> change, FullCodegenerator::State is moved to Deoptimize::BailoutState.
>
> BUG=v8:4280
> LOG=N
>
> Committed: https://crrev.com/34c9626e2ee56fe805de549697ca5323aed7cb66
> Cr-Commit-Position: refs/heads/master@{#36288}
TBR=mstarzinger@chromium.org,oth@chromium.org,rmcilroy@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280
Review-Url: https://codereview.chromium.org/1986353002
Cr-Commit-Position: refs/heads/master@{#36294}
In order to support compiling to baseline on return we need to be able to
return to the actual return address. With this change this is what the
Return bytecode now does, removing the need for the
InterpreterExitTrampoline.
This change also removes the InterpreterNotifyDeoptXXX builtins and
unifies FCG and Igntion to both use NotifyDeoptXXX. As part of this
change, FullCodegenerator::State is moved to Deoptimize::BailoutState.
BUG=v8:4280
LOG=N
Review-Url: https://codereview.chromium.org/1969423002
Cr-Commit-Position: refs/heads/master@{#36288}
This adds back the instanceof operator support in the backends and
introduces a @@hasInstance protector cell on the isolate that guards the
fast path for the InstanceOfStub. This way we recover the ~10%
regression on Octane EarleyBoyer in Crankshaft and greatly improve
TurboFan and Ignition performance of instanceof.
R=ishell@chromium.orgTBR=hpayer@chromium.org,rossberg@chromium.org
BUG=chromium:597249, v8:4447
LOG=n
Review-Url: https://codereview.chromium.org/1980483003
Cr-Commit-Position: refs/heads/master@{#36275}
Reason for revert:
Not the culprit sorry.
Original issue's description:
> Revert of [Reland] Implement CPU time for OS X and POSIX. (patchset #1 id:1 of https://codereview.chromium.org/1966183003/ )
>
> Reason for revert:
> Blocks roll: https://codereview.chromium.org/1972303002/
>
> Original issue's description:
> > [Reland] Implement CPU time for OS X and POSIX.
> >
> > V8 tracing controller uses 2 clocks: wall clock and cpu clock. This patch
> > implements CPU time for OS X and POSIX to provide more accurate
> > accounting of CPU time used by each thread.
> >
> > BUG=v8:4984
> > LOG=n
> >
> > Committed: https://crrev.com/efa27fb25e1fa5b8465f4af710086b73b0cba660
> > Cr-Commit-Position: refs/heads/master@{#36213}
>
> TBR=fmeawad@chromium.org,jochen@chromium.org,rsesek@chromium.org,bmeurer@chromium.org,lpy@chromium.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=v8:4984
>
> Committed: https://crrev.com/31b9ba3bc8fb93601cc73c83213b30e639d448b3
> Cr-Commit-Position: refs/heads/master@{#36225}
TBR=fmeawad@chromium.org,jochen@chromium.org,rsesek@chromium.org,bmeurer@chromium.org,lpy@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4984
Review-Url: https://codereview.chromium.org/1976603005
Cr-Commit-Position: refs/heads/master@{#36233}
This is a first step to removing the support for the OldFunctions
section altogether, which will greatly simplify the encoder and remove
the need to do local variable remapping in asm->wasm.
R=bradnelson@chromium.org,aseemgarg@chromium.org
BUG=
Review-Url: https://codereview.chromium.org/1974933002
Cr-Commit-Position: refs/heads/master@{#36228}
This patch adds support for the `Operand2_R_LSL_I` addressing mode to
loads and stores. This allows merging a shift instruction into a
MemoryOperand. Since the shift immediate is restricted to the log2 of
the operation width, the opportunities to hit this are slim. However,
Ignition's bytecode handlers hit this case all the time:
kind = BYTECODE_HANDLER
name = Star
compiler = turbofan
Instructions (size = 44)
0x23e67280 0 add x1, x19, #0x1 (1)
0x23e67284 4 ldrsb x1, [x20, x1]
0x23e67288 8 sxtw x1, w1
0x23e6728c 12 mov x2, fp
0x23e67290 16 str x0, [x2, x1, lsl #3]
^^^^^^^^^^^^^^^^^^^^^
0x23e67294 20 add x19, x19, #0x2 (2)
0x23e67298 24 ldrb w1, [x20, x19]
0x23e6729c 28 ldr x1, [x21, x1, lsl #3]
^^^^^^^^^^^^^^^^^^^^^
0x23e672a0 32 br x1
Additionally, I noticed the optimisation occurs once in both the
`StringPrototypeCharAt` and `StringPrototypeCharCodeAt` turbofan stubs.
BUG=
Review-Url: https://codereview.chromium.org/1972103002
Cr-Commit-Position: refs/heads/master@{#36227}
Reason for revert:
Blocks roll: https://codereview.chromium.org/1972303002/
Original issue's description:
> [Reland] Implement CPU time for OS X and POSIX.
>
> V8 tracing controller uses 2 clocks: wall clock and cpu clock. This patch
> implements CPU time for OS X and POSIX to provide more accurate
> accounting of CPU time used by each thread.
>
> BUG=v8:4984
> LOG=n
>
> Committed: https://crrev.com/efa27fb25e1fa5b8465f4af710086b73b0cba660
> Cr-Commit-Position: refs/heads/master@{#36213}
TBR=fmeawad@chromium.org,jochen@chromium.org,rsesek@chromium.org,bmeurer@chromium.org,lpy@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4984
Review-Url: https://codereview.chromium.org/1977753002
Cr-Commit-Position: refs/heads/master@{#36225}
This change introduces a pipeline for the final stages of
bytecode generation.
The peephole optimizer is made distinct from the BytecodeArrayBuilder.
A new BytecodeArrayWriter is responsible for writing bytecode. It
also keeps track of the maximum register seen and offers a potentially
smaller frame size.
R=rmcilroy@chromium.org
LOG=N
BUG=v8:4280
Review-Url: https://codereview.chromium.org/1947403002
Cr-Commit-Position: refs/heads/master@{#36220}
We eagerly inserted Int32Mul for Math.imul during builtin lowering and
messed up with the types, which confused the representation selection.
This adds a proper NumberImul operator, and fixes the builtin reducer to
do the right thing according to the spec.
R=mstarzinger@chromium.org
BUG=v8:5006
LOG=n
Review-Url: https://codereview.chromium.org/1971163002
Cr-Commit-Position: refs/heads/master@{#36219}
V8 tracing controller uses 2 clocks: wall clock and cpu clock. This patch
implements CPU time for OS X and POSIX to provide more accurate
accounting of CPU time used by each thread.
BUG=v8:4984
LOG=n
Review-Url: https://codereview.chromium.org/1966183003
Cr-Commit-Position: refs/heads/master@{#36213}
Reason for revert:
Buildbot is failing on Mac release build.
Original issue's description:
> Implement CPU time for OS X and POSIX.
>
> V8 tracing controller uses 2 clocks: wall clock and cpu clock. This patch
> implements CPU time for OS X and POSIX to provide more accurate
> accounting of CPU time used by each thread.
>
> BUG=v8:4984
> LOG=n
>
> Committed: https://crrev.com/025f3d262bab2748362374f1b90ac723a9655ee4
> Cr-Commit-Position: refs/heads/master@{#36188}
TBR=jochen@chromium.org,bmeurer@chromium.org,fmeawad@chromium.org,rsesek@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4984
Review-Url: https://codereview.chromium.org/1966173003
Cr-Commit-Position: refs/heads/master@{#36189}
V8 tracing controller uses 2 clocks: wall clock and cpu clock. This patch
implements CPU time for OS X and POSIX to provide more accurate
accounting of CPU time used by each thread.
BUG=v8:4984
LOG=n
Review-Url: https://codereview.chromium.org/1959103004
Cr-Commit-Position: refs/heads/master@{#36188}
Up until now we had two places where we did the function prototype
folding, once in the Typer and once in JSTypedLowering. Put this logic
into JSNativeContextSpecialization instead.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/1965293002
Cr-Commit-Position: refs/heads/master@{#36157}
Make JSCreateArguments eliminatable, and remove the need for frame
states on JSCreateArguments nodes being lowered to (optimized) stub
calls. Only the runtime fallback needs a frame state, because in that
case we need to ask the deoptimizer for arguments to inlined functions.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/1965013005
Cr-Commit-Position: refs/heads/master@{#36154}
This adds a new pass MemoryOptimizer that walks over the effect chain
from Start and lowers all Allocate, LoadField, StoreField, LoadElement,
and StoreElement nodes, trying to fold allocations into allocation
groups and eliminate write barriers on StoreField and StoreElement if
possible (i.e. if the object belongs to the current allocation group and
that group allocates in new space).
R=hpayer@chromium.org, jarin@chromium.org
BUG=v8:4931, chromium:580959
LOG=n
Review-Url: https://codereview.chromium.org/1963583004
Cr-Commit-Position: refs/heads/master@{#36128}
atomic-utils.h only uses functionality from base/, and also by moving it into
base/, code outside of v8_base can benefit from it.
BUG=v8:4991
LOG=n
Review-Url: https://codereview.chromium.org/1954603002
Cr-Commit-Position: refs/heads/master@{#36114}
This catches malformed code like the following example:
<expr>
<block begin>
<expr>
<binop>
<end>
Which is illegal because the inputs to the binop cross the block boundary.
R=rossberg@chromium.org,ahaas@chromium.org
BUG=
Review-Url: https://codereview.chromium.org/1961853002
Cr-Commit-Position: refs/heads/master@{#36103}
This operator was initially designed to handle arbitrary effect merging
for effect relaxation, but we don't do that (at least currently). So no
need to keep the dead operator around.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/1954983002
Cr-Commit-Position: refs/heads/master@{#36063}
A load instruction will implicitely clear the top 32 bits when writing to a W
register. This patch avoids generating a `mov` instruction to zero-extend the
result in this case.
For example, this occurs in the generated code for dispatching to the next
bytecode in the interpreter:
kind = BYTECODE_HANDLER
name = LdaZero
compiler = turbofan
Instructions (size = 36)
0x32e64c60 0 add x19, x19, #0x1 (1)
0x32e64c64 4 ldrb w0, [x20, x19]
0x32e64c68 8 mov w0, w0
^^^^^^^^^^
0x32e64c6c 12 lsl x0, x0, #3
0x32e64c70 16 ldr x1, [x21, x0]
0x32e64c74 20 movz x0, #0x0
0x32e64c78 24 br x1
BUG=
Review-Url: https://codereview.chromium.org/1950013003
Cr-Commit-Position: refs/heads/master@{#36038}
Now that everything is properly wired to the effect chain when we get to
ChangeLowering, we can safely inline the allocation fast path and only
need to consule the slow path stub fallback when bump pointer allocation
fails.
R=jarin@chromium.org
BUG=v8:4931
LOG=n
Review-Url: https://codereview.chromium.org/1951853002
Cr-Commit-Position: refs/heads/master@{#36022}
When storing an immediate integer or floating point zero, use the zero register
as the source value. This avoids the need to sometimes allocate a new register.
BUG=
Review-Url: https://codereview.chromium.org/1945783002
Cr-Commit-Position: refs/heads/master@{#36013}
Now ChangeLowering is only concerned with lowering memory access and
allocation operations, and all changes are consistently lowered during
the effect/control linearization pass. The next step is to move the
left over lowerings to a pass dedicated to eliminate redundant loads and
stores, eliminate write barriers, fold and inline allocations.
Drive-by-fix: Rename ChangeBitToBool to ChangeBitToTagged,
ChangeBoolToBit to ChangeTaggedToBit, and ChangeInt31ToTagged to
ChangeInt31ToTaggedSigned for consistency.
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux64_tsan_rel
Committed: https://crrev.com/ceca5ae308bddda166651c654f96d71d74f617d0
Cr-Commit-Position: refs/heads/master@{#35924}
Review-Url: https://codereview.chromium.org/1941673002
Cr-Commit-Position: refs/heads/master@{#35929}
Reason for revert:
[Sheriff] Breaks mac gc stress:
https://build.chromium.org/p/client.v8/builders/V8%20Mac%20GC%20Stress/builds/5821
Original issue's description:
> [turbofan] Remove left-over change bits from ChangeLowering.
>
> Now ChangeLowering is only concerned with lowering memory access and
> allocation operations, and all changes are consistently lowered during
> the effect/control linearization pass. The next step is to move the
> left over lowerings to a pass dedicated to eliminate redundant loads and
> stores, eliminate write barriers, fold and inline allocations.
>
> Also remove the atomic regions now that we wire everything into the
> effect chain properly. This is an important step towards allocation
> inlining.
>
> Drive-by-fix: Rename ChangeBitToBool to ChangeBitToTagged,
> ChangeBoolToBit to ChangeTaggedToBit, and ChangeInt31ToTagged to
> ChangeInt31ToTaggedSigned for consistency.
>
> CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux64_tsan_rel
>
> Committed: https://crrev.com/ceca5ae308bddda166651c654f96d71d74f617d0
> Cr-Commit-Position: refs/heads/master@{#35924}
TBR=ishell@chromium.org,bmeurer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review-Url: https://codereview.chromium.org/1942733002
Cr-Commit-Position: refs/heads/master@{#35927}
Now ChangeLowering is only concerned with lowering memory access and
allocation operations, and all changes are consistently lowered during
the effect/control linearization pass. The next step is to move the
left over lowerings to a pass dedicated to eliminate redundant loads and
stores, eliminate write barriers, fold and inline allocations.
Also remove the atomic regions now that we wire everything into the
effect chain properly. This is an important step towards allocation
inlining.
Drive-by-fix: Rename ChangeBitToBool to ChangeBitToTagged,
ChangeBoolToBit to ChangeTaggedToBit, and ChangeInt31ToTagged to
ChangeInt31ToTaggedSigned for consistency.
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux64_tsan_rel
Review-Url: https://codereview.chromium.org/1941673002
Cr-Commit-Position: refs/heads/master@{#35924}
This prepares for pulling chromium's build as dependency for
gn. After this, the files in build and gypfiles need to stay
in sync until chromium is updated.
BUG=chromium:474921
LOG=n
Review-Url: https://codereview.chromium.org/1848553003
Cr-Commit-Position: refs/heads/master@{#35898}
[wasm] Binary 11: Swap the order of section name / section length.
[wasm] Binary 11: Shorter section names.
[wasm] Binary 11: Add a prefix for function type declarations.
[wasm] Binary 11: Function types encoded as pcount, p*, rcount, r*
[wasm] Fix numeric names for functions.
R=rossberg@chromium.org,jfb@chromium.org,ahaas@chromium.org
BUG=chromium:575167
LOG=Y
Review-Url: https://codereview.chromium.org/1896863003
Cr-Commit-Position: refs/heads/master@{#35897}
[wasm] Binary 11: br_table takes a value.
[wasm] Binary 11: Add implicit blocks to if arms.
[wasm] Binary 11: Add arities to call, return, and breaks
[wasm] Binary 11: Add experimental version.
This CL changes the encoder, decoder, and tests to use a postorder
encoding of the AST, which is more efficient in decode time and
space.
R=bradnelson@chromium.org,rossberg@chromium.org,binji@chromium.org
BUG=chromium:575167
LOG=Y
Review-Url: https://codereview.chromium.org/1830663002
Cr-Commit-Position: refs/heads/master@{#35896}
DevTools uses the debug interrupt to trap on function entry. Without
source position at the stack check, we would get bogus source positions.
R=mstarzinger@chromium.org
BUG=chromium:595646
LOG=N
Review-Url: https://codereview.chromium.org/1925063002
Cr-Commit-Position: refs/heads/master@{#35864}
These also lower to subgraphs that have to be connected to the effect
and control chains, otherwise removing the atomic regions around heap
allocations would still be unsound.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1916763003
Cr-Commit-Position: refs/heads/master@{#35762}
This will allow to pull in gyp as a deps to the same location
as chromium (tools/gyp not build/gyp), needed for gn switch.
This is the first step of a 3-way move.
1) Copy v8.gyp in v8
2) Update references in embedders (follow up)
3) Remove old v8.gyp (follow up)
BUG=chromium:474921
LOG=n
NOTRY=true
Review URL: https://codereview.chromium.org/1920793002
Cr-Commit-Position: refs/heads/master@{#35760}
This allows us to get rid of the "push TruncateFloat64ToInt32 into Phi"
trick that was used in the MachineOperatorReducer to combine the
ChangeTaggedToFloat64 and TruncateFloat64ToInt32 operations. Instead of
doing that later, we can just introduce the proper operator during the
representation selection directly.
Also separate the TruncateFloat64ToInt32 machine operator, which had two
different meanings depending on a flag (either JavaScript truncation or
C++ style round to zero). Now there's a TruncateFloat64ToWord32 which
represents the JavaScript truncation (implemented via TruncateDoubleToI
macro + code stub) and the RoundFloat64ToInt32, which implements the C++
round towards zero operation (in the same style as the other WebAssembly
driven Round* machine operators).
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1919513002
Cr-Commit-Position: refs/heads/master@{#35743}
Reason for revert:
Need to fix the #undef logic.
Original issue's description:
> Fix interpreter unittest for embedded constant pools.
>
> The offset from fp to the register file is based on the frame size
> -- which is one slot larger when embedded constant pools are enabled.
>
> TEST=unittests/DecodeBytecodeAndOperands
> R=rmcilroy@chromium.org, bmeurer@chromium.org, oth@chromium.org, mstarzinger@chromium.org
> BUG=
TBR=bmeurer@chromium.org,mstarzinger@chromium.org,oth@chromium.org,rmcilroy@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1909323003
Cr-Commit-Position: refs/heads/master@{#35736}
Removes some control edges added from the RawMachineAssembler to the end of the graph.
Adds a parameter that tells the Verifier to ignore effect and control inputs.
Review URL: https://codereview.chromium.org/1912853003
Cr-Commit-Position: refs/heads/master@{#35731}
Get rid of further typing checks from ChangeLowering and put them into
the representation selection pass instead (encoding the information in
the operator instead).
Drive-by-change: Rename ChangeSmiToInt32 to ChangeTaggedSignedToInt32
for consistency about naming Tagged, TaggedSigned and TaggedPointer.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1909343002
Cr-Commit-Position: refs/heads/master@{#35723}
The new bytecodes replace two runtime functions. They are still unsupported by the bytecode graphbuilder, though.
BUG=v8:4907
LOG=n
Review URL: https://codereview.chromium.org/1904933002
Cr-Commit-Position: refs/heads/master@{#35716}
If we have to convert a float64 value to tagged representation and we
already know that the value is either in Signed31/Signed32 or
Unsigned32 range, then we can just convert the float64 to word32 and
use the fast word32 to tagged conversion. Doing this in
ChangeLowering (or the effect linearization pass) would be unsound, as
the types on the nodes are no longer usable.
This removes all Type uses from effect linearization. There's still some
work to be done for ChangeLowering tho.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1908093002
Cr-Commit-Position: refs/heads/master@{#35713}
