If --turbo-nci is enabled, use compare op builtins with feedback
collection during generic lowering.
Bug: v8:8888
Change-Id: I886020e2ee280f65388d9987c70958546f99e0f3
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2215821
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#68100}
This adds support for multiple isolates sharing the same module but
setting different breakpoints. This is simulated by having a debugger
test that runs in the "--isolates" variant, i.e. two isolates running
the same test at the same time. Both isolates will set and remove
breakpoints.
The DebugInfo will keep a separate list of breakpoints per isolate, and
when recompiling a function for debugging it will respect all
breakpoints in all isolates.
In order to ensure consistency if multiple isolates are setting or
removing breakpoints simultaneously, we go back to a more coarse-grained
locking scheme, where the DebugInfo lock is held while re-compiling
Liftoff functions.
While recompilation will install the code in the module-global code
table and jump table (and hence all isolates will use it for future
calls), only the stack of the requesting isolate is rewritten to
immediately use new code. This is OK, because other isolates are not
interested in the new breakpoint(s) anyway.
On {SetBreakpoint}, we always need to rewrite the stack of the
requesting isolate though, even if the breakpoint was set before by
another isolate.
Drive-by: Some fixes in SharedFunctionInfo in order to support setting
breakpoints via the Debug mirror.
R=thibaudm@chromium.org
Bug: v8:10359
Change-Id: If659afb273260fc5e8124b4b617fb4322de473c7
Cq-Include-Trybots: luci.v8.try:v8_linux64_tsan_rel
Cq-Include-Trybots: luci.v8.try:v8_linux64_tsan_isolates_rel_ng
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2218059
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#68096}
Unreachable code may consume values from an empty stack as needed, known
as stack polymorphism. After consuming the values, the stack height
should still be 0, which was incorrectly handled by multi-value blocks.
R=ahaas@chromium.org
Bug: chromium:1085507
Change-Id: Ibf5f2d05bec0fbe029cfa66ee2d07540a370934a
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2218033
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/master@{#68070}
This is a reland of dfdef88547
Original change's description:
> [wasm-simd] Fix extract lane unsigned extend
>
> The interpreter is missing a static cast when extracting lanes smaller
> than int32_t and doing an unsigned extend. The array in Simd128 is
> signed, so a direct cast to uint32_t will be a signed extension. The fix
> is to, in the unsigned case, cast to unsigned (of the appropriate size)
> first, then cast to uint32_t.
>
> Change-Id: Ifabb5b9690f08ad505ac94b84908db0970581818
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2216721
> Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
> Commit-Queue: Zhi An Ng <zhin@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#68029}
Change-Id: Ica7974a2f1f2a4f07b54cc68f9abcf5e121a9262
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2219414
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Cr-Commit-Position: refs/heads/master@{#68063}
Split platform into a process-global initialization part and per-heap
platform objects.
These platform objects still contain allocators and executors. With
per-heap platforms GetForegroundTaskRunner() returns by definition the
correct runner.
In future, when initialized throuhg V8, an adapter can be used to
translate between the different platforms, avoiding the needed for V8
embedders to provide additional information.
Bug: chromium:1056170
Change-Id: I11bdd15e945687cfbdf38cae4137facb02559e0a
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2218030
Commit-Queue: Michael Lippautz <mlippautz@chromium.org>
Commit-Queue: Anton Bikineev <bikineev@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Omer Katz <omerkatz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#68059}
Allocating a new feedback vector happens in two steps: We create an
empty structure and then initialize the array based on the
FeedbackMetadata.When allocating a new feedback array we could trigger
a GC which might flush the bytecode and associated feedback metadata.
This shouldn't happen in normal cases, because we either allocate
feedback vector after compilation or when we reach the expected budget.
In both cases, the age of the feedback vector should be 0 and hence
bytecode shouldn't be flushed. However, with debugger enabled we may
allocate feedback vectors even when the bytecode array is old
for example: when we enable precise invocation counters. This also
causes issues in tests with --stress-flush-bytecode. In the stress mode
we flush bytecode without considering the age. Holding on to the
feedback metadata prevents crashes in such cases.
Bug: v8:10560
Change-Id: Ie806ff4102cb5fcf257c8683d5ca957853e38c05
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2218066
Commit-Queue: Mythri Alle <mythria@chromium.org>
Auto-Submit: Mythri Alle <mythria@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#68052}
This reverts commit e270b6d615.
Reason for revert: V8 DEPS roll stuck https://crbug.com/v8/10567#c1
Original change's description:
> Roll ICU from 65.1 to 67.1 (f2223961) & correct tests
>
> Rolling to chrome/src is in
> https://chromium-review.googlesource.com/c/chromium/src/+/2155530
>
> Since auto rolling stop after 3/24/2020 and the rolling will cause
> change of test status, I get this cl ready (but not running trybot due
> to 1074260) and plan to hand roll after the submission of 2155530.
>
> Bug: chromium:1064326, v8:9515, v8:10379, v8:10380, v8:10437
> Change-Id: I19554f68cfdc5b717dfc7fc4b1222e9dc25b8d69
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2158486
> Auto-Submit: Frank Tang <ftang@chromium.org>
> Commit-Queue: Michael Achenbach <machenbach@chromium.org>
> Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
> Reviewed-by: Michael Achenbach <machenbach@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#67493}
TBR=jkummerow@chromium.org,machenbach@chromium.org,jshin@chromium.org,ftang@chromium.org,syg@chromium.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: chromium:1064326, v8:9515, v8:10379, v8:10380, v8:10437
Change-Id: I3f4233815ed7414f2cde3d4d996696575b5f6e3a
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2219334
Reviewed-by: Zhi An Ng <zhin@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#68051}
Temporarily disable stress-bytecode-flush on
mjsunit/regress/regress-786784 while we investigate failures related
to bytecode flushing.
Bug: v8:10560
Change-Id: Ieb5cc7ba87da04133e98c6be25c9a499d79543e0
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2218038
Reviewed-by: Marja Hölttä <marja@chromium.org>
Auto-Submit: Mythri Alle <mythria@chromium.org>
Commit-Queue: Mythri Alle <mythria@chromium.org>
Cr-Commit-Position: refs/heads/master@{#68046}
Instead of keeping a single {stepping_frame_} per native module, we now
keep one frame id per isolate. Hence, each isolate can step through a
different frame, independent of other isolates.
The on-stack-replacement of the stepping frame already works on a
per-isolate basis, since we only replace the return address of a single
frame, part of the isolate that requested stepping.
The new test (which also executes in a variant with two concurrent
isolates) revealed some more data races to fix.
R=thibaudm@chromium.org
Bug: v8:10359
Cq-Include-Trybots: luci.v8.try:v8_linux64_tsan_rel
Cq-Include-Trybots: luci.v8.try:v8_linux64_tsan_isolates_rel_ng
Change-Id: I0bb013737162bd09b9f4be9c08990bca7bf736ac
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2214838
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#68045}
Make sure that any GCs required for off-thread heap merging happen
before any off-thread handle transferring (both transferring using
OffThreadTransferHandle, and the handles created for the string slot
fixups). This is to avoid the marker from walking Handle roots that
point into off-thread pages which the sweeper doesn't see (and can't
clear mark bits on)
Now, the merging and handle creation is atomic as far as the GC is
concerned. The merging is done before handle creation to avoid the
incremental marker from entering off-thread pages, but we ensure that
the raw objects pointers that point into the off-thread pages (which
are used for creating the main-thread handles) stay valid until the
handle creation completes.
Since handle transfer now happens in the middle of publishing, this
patch also moves the OffThreadTransferHandleStorage ownership over to
OffThreadHeap. This requires some header juggling to avoid leaking
OffThreadTransferHandleStorage into the off-thread-isolate header.
Bug: chromium:1086478, chromium:1011762
Change-Id: Id5e7622d6b5520400a4872c5f6ad396c74b30ca6
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2218058
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Auto-Submit: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Toon Verwaest <verwaest@chromium.org>
Cr-Commit-Position: refs/heads/master@{#68043}
In BinaryOpAssembler::Generate_BinaryOperationWithFeedback, the
feedback is stored only after the respective builtin/runtime call.
If this call throws an exception, the feedback is lost, leading
to a deopt loop in some cases. This CL fixes that issue by writing
the gathered feedback before passing control to the builtin.
Bug: chromium:1077197, v8:9441
Change-Id: I20e4b14815520224e2c6f8af1af6a89f754ccddf
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2202904
Commit-Queue: Nico Hartmann <nicohartmann@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Mythri Alle <mythria@chromium.org>
Auto-Submit: Nico Hartmann <nicohartmann@chromium.org>
Cr-Commit-Position: refs/heads/master@{#68038}
This is a reland of 6204768bab
The original issue exposed the problem that NumberEqual performs
implicit conversion of oddballs to numbers, which is incorrect for
abstract equality comparison (i.e. 0 == null must not be true).
This reland fixes this by applying the following steps:
* Introduced a new kNumberOrBoolean value for CompareOperationFeedback,
CompareOperationHint, TypeCheckKind and CheckedTaggedInputMode.
* In CodeStubAssembler::Equal: Further distinguish between boolean and
non-boolean oddballs and set feedback accoringly.
* In JSTypedLowering: Construct [Speculative]NumberEqual operator with
CompareOperationHint::kNumberOrBoolean, when this feedback is present.
JSOperatorBuilder and operator cache are extended accordingly.
* In SimplifiedLowering: Propagate a UseInfo with new
TypeCheckKind::kNumberOrBoolean.
* This leads to the generation of CheckedTaggedToFloat64 in
RepresentationChanger with new CheckedTaggedInputMode::kNumberOrBoolean.
* In EffectControlLinearizer: Handle this new mode. Accept and convert
number and boolean and deopt for rest.
Original change's description:
> [turbofan] Improve equality on NumberOrOddball
>
> This CL cleans up CompareOperationFeedback by replacing it with a
> composable set of flags. The interpreter is changed to collect
> more specific feedback for abstract equality, especially if oddballs
> are involved.
>
> TurboFan is changed to construct SpeculativeNumberEqual operator
> instead of the generic JSEqual in many more cases. This change has
> shown a local speedup of a factor of 3-10, because the specific
> operator is way faster than calling into the generic builtin, but
> it also enables additional optimizations, further improving
> runtime performance.
>
> Bug: v8:5660
> Change-Id: I856752caa707e9a4f742c6e7a9c75552fb431d28
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2162854
> Reviewed-by: Mythri Alle <mythria@chromium.org>
> Reviewed-by: Georg Neis <neis@chromium.org>
> Commit-Queue: Nico Hartmann <nicohartmann@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#67645}
TBR: tebbi@chromium.org
Bug: v8:5660
Change-Id: I12e733149a1d2773cafb781a1d4b10aa1eb242a7
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2193713
Commit-Queue: Georg Neis <neis@chromium.org>
Reviewed-by: Mythri Alle <mythria@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#68037}
This reverts commit dfdef88547.
Reason for revert: https://ci.chromium.org/p/v8/builders/ci/V8%20Blink%20Mac/2718?
Original change's description:
> [wasm-simd] Fix extract lane unsigned extend
>
> The interpreter is missing a static cast when extracting lanes smaller
> than int32_t and doing an unsigned extend. The array in Simd128 is
> signed, so a direct cast to uint32_t will be a signed extension. The fix
> is to, in the unsigned case, cast to unsigned (of the appropriate size)
> first, then cast to uint32_t.
>
> Change-Id: Ifabb5b9690f08ad505ac94b84908db0970581818
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2216721
> Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
> Commit-Queue: Zhi An Ng <zhin@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#68029}
TBR=gdeepti@chromium.org,zhin@chromium.org
Change-Id: Icdd0e705f4c7252aef2cadaa39ec52204b5c6093
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2219412
Reviewed-by: Zhi An Ng <zhin@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#68030}
The interpreter is missing a static cast when extracting lanes smaller
than int32_t and doing an unsigned extend. The array in Simd128 is
signed, so a direct cast to uint32_t will be a signed extension. The fix
is to, in the unsigned case, cast to unsigned (of the appropriate size)
first, then cast to uint32_t.
Change-Id: Ifabb5b9690f08ad505ac94b84908db0970581818
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2216721
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#68029}
If the return_count is zero, the Generate will be called twice. The recent update in Generate function already handle the case inside the Generate function overload.
Change-Id: I49e0ee4a0824db60f157ea288ae6d28978c42db5
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2215816
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/master@{#68000}
This is a reland of 8374feed55.
Fixed rehashing of global proxy keys by creating its identity hash
early, before the deserialization of the context snapshot.
Original change's description:
> [snapshot] rehash JSMap and JSSet during deserialization
>
> To rehash JSMap and JSSet, we simply replace the backing store
> with a new one created with the new hash.
>
> Bug: v8:9187
> Change-Id: I90c25b18b33b7bc2b6ffe1b89fe17aa5f978b517
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2143983
> Commit-Queue: Joyee Cheung <joyee@igalia.com>
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Reviewed-by: Camillo Bruni <cbruni@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#67663}
Bug: v8:9187, v8:10523
Change-Id: I7a0319b1d10ff07644de902fec43e7c2b1dd8da9
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2212085
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Joyee Cheung <joyee@igalia.com>
Cr-Commit-Position: refs/heads/master@{#67999}
Added --trace-wasm flag which prints function entry in wasm.
R=clemensb@chromium.org
Bug: v8:10559
Change-Id: I049efeadb0149f4f58ce34a29fd53fbf5688bd4b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2215052
Commit-Queue: Arnaud Robin <arobin@google.com>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67998}
Previously both the length and the endColumn for Wasm scripts were
reported as 0, and that was sort of okayish, since the front-end
was ignoring both of these fields in case of Wasm, and was applying
special cases. But these special casing lead to some subtle bugs,
and this is the first step towards a more uniform treatment.
Source positions for Wasm are in terms of the bytecode, and the
column field contains the bytecode offset here, while the line
number field is always 0. Hence we send 0 for both startLine and
endLine as before, but endColumn now corresponds to the bytecode
size.
Bug: chromium:1056632
Change-Id: Ia8a9cfe454ed250b87a524f5cbcbbbe242205db6
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2215817
Auto-Submit: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Yang Guo <yangguo@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67997}
Motivation:
In the wasm-gc proposal, structs and arrays are allowed to store
elements of packed types i8 and i16.
Changes:
- Add i8 and i16 to ValueType.
- Fix all case switches to handle the new cases.
- Add a couple helper methods to ValueType and improve the
implementation/usage of a couple more.
Bug: v8:7748
Change-Id: I527cfe5acf5d877fc38e4212174ba9f9de5c40ad
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2215046
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67994}
This removes the post-mvp flag for bitmask, since it was accepted into
the proposal, see https://github.com/WebAssembly/simd/pull/201.
Bug: v8:10308
Change-Id: I4ced43a6484660125d773bc9de46bdea9f72b13b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2216532
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67993}
We can do a good job of optimizing Torque expressions that load and
check multiple bitfields from a bitfield struct, but only if those
expressions are written using the binary `&` operator as opposed to the
logical `&&`. This change adds a lint rule to detect some simple cases
where we should clearly prefer `&` to `&&`.
Bug: v8:7793
Change-Id: Id996a7971cff8f7f83198075a172170d9c7d42e9
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2207666
Commit-Queue: Seth Brenith <seth.brenith@microsoft.com>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67991}
There was a legacy place in map code that wasn't fully ported to use
the strong, new SloppyArgumentsElements type because of code that used
hard-coded constants.
Bug: chromium:1086470
Change-Id: Ieba152e4bd92c89125f831949c2efb4f4219f95c
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2215059
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Commit-Queue: Daniel Clifford <danno@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67984}
This reverts commit a35d0e8cb5.
The original CL is likely not a culprit for the infra failures.
Bug: chromium:1056170
Change-Id: I8fa85db8a737fb01328021782f0c43626fa52b0d
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2215826
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Commit-Queue: Anton Bikineev <bikineev@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67977}
Several tests were using them and we can dedup code.
Change-Id: I4ef5ae5772856d1f36e965b6b62ff5895b4e04fb
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2215173
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Commit-Queue: Santiago Aboy Solanes <solanes@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67974}
This reverts commit 4e5fabaedd.
Reason for revert: performance regressions chromium:1085305, chromium:1084978
Original change's description:
> [torque][cleanup] Use more precise field types in a few classes
>
> This change updates some Torque-defined classes to include more precise
> field types where possible. It also updates those classes to use
> @generateCppClass. One field was removed because it's unused
> (PrototypeInfo::validity_cell), and two fields in StackFrameInfo
> actually became less precise because they're based on Script::name,
> which is an embedder-provided untyped Local<Value>. (Automatically
> generated accessors pointed out this bug easily.)
>
> This change also includes a couple of minor fixes in Torque.
>
> Change-Id: Ib2bc6c7165bb3612b6d344c0686a94165a568277
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2199640
> Commit-Queue: Seth Brenith <seth.brenith@microsoft.com>
> Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
> Reviewed-by: Toon Verwaest <verwaest@chromium.org>
> Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#67907}
TBR=ulan@chromium.org,tebbi@chromium.org,verwaest@chromium.org,seth.brenith@microsoft.com
Change-Id: I720821d8dc84ea0d79eb137f1c2507f75df9a107
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2211322
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67972}
This moves concurrent and incremental sweeping from Blink. This also
adds TestPlatform that makes it easier to test concurrent and
incremental sweeping.
Drive-by: fix unmarking of large pages.
Bug: chromium:1056170
Change-Id: Ifd50ff67b9df17ff117a5f4d4eb5a2937d3023be
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2207132
Commit-Queue: Anton Bikineev <bikineev@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Omer Katz <omerkatz@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67969}
Objects allocated on the background thread during incremental marking, need to be allocated black. This prevents concurrent marking to observe uninitialized objects.
Bug: v8:10315
Change-Id: Ia4b05a2a72e4142c79b31a01cbf162a6599a18c0
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2196347
Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67967}
The Isolate is only used to access the wasm engine, and the accounting
allocating. The latter is also linked directly from the wasm engine, and
the engine is linked from the native module, to which the DebugInfoImpl
already has access.
Hence, this CL removes the redundant Isolate pointers, and just accesses
the engine and the allocator via the NativeModule.
R=thibaudm@chromium.org
Change-Id: Ib51cee2d166443a34e22fa02e8ad1549328aaa7f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2214827
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67966}
This adds the wasm instance to the module scope. The instance
contains the exported entities that can now be inspected.
Bug: chromium:1043034
Change-Id: I9236ac9c126f3bc4b1e056990fe34956bbe8ed6b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2213433
Commit-Queue: Kim-Anh Tran <kimanh@chromium.org>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67961}
The interpreter is not used for debugging any more. Hence any breakpoint
support and related functionality is dead code.
This CL removes
- the {SetBreakpoint} and {GetBreakpoint} methods,
- the {break_pc_} field which holds the current pause position,
- the {break_flags_} field which is used to break at function entry and
after calls,
- functions to modify {break_flags_},
- the dead {kInternalBreakpoint} and {kInvalidPc} constants (plus
respective macros and enums),
- the {orig_start} and {orig_end} fields (code is not being modified any
more, so we just use {start} and {end} now),
- the {PrepareStepIn} method,
- the unimplemented {SetTracing} method, and
- two tests that test breakpoints in the interpreter.
R=thibaudm@chromium.org
Bug: v8:10389
Change-Id: I52103c37516446e40d3dfa365d6b480a7c623577
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2215163
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67958}
This CL introduces the SyncStreamingDecoder to support
streaming compilation when --single-threaded is set. The
SyncStreamingDecoder buffers all bytes it receives over
{OnBytesReceived}, and compiles them synchronously upon {Finish}.
In addition to introducing SyncStreamingDecoder, this CL does
the following changes:
* Redirect streaming compilation to the new streaming decoder if
--no-wasm-async-compilation is set. This flag is set if
--single-threaded is set.
* Extend the test-streaming-compilation.cc tests to test also the new
streaming decoder.
R=thibaudm@chromium.org
Bug: v8:10548
Change-Id: I807e291a6060067c9835de4adf82bcb00321d995
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2209053
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67955}
We can't consistently rewire the successor blocks of an unreachable node to
disconnect them from the graph when we are trying to maintain the schedule.
Instead simply leave the code there. As a future optimization we could add a
proper scheduled dead code elimination phase which can deal with this.
As a side-effect, one of the tests sees a int64 DeadValue, so add support for that
in the instruction selector.
BUG=chromium:1083272,chromium:1083763,chromium:1084953,v8:9684
Change-Id: I69a6feaeef4eae62110392e27ea848b28bccf787
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2209061
Commit-Queue: Tobias Tebbi <tebbi@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Auto-Submit: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67953}
This CL also fixes a small bug in the update-wasm-spec-tests.sh script,
as it was not able to handle proposals without additional core spec
tests. It also disables a lot of tests.
R=jkummerow@chromium.org
bug:v8:10556
Change-Id: Ibd885350478de935dc67edb664715cfa64f1d8e1
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2210248
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67949}
Sometimes CSA code carefully constructs a mask to check several
bitfields at once. Thus far, such a check has been very awkward to write
in Torque. This change adds a way to do so, using the
non-short-circuiting binary `&` operator. So now you can write an
expression that depends on several bitfields from a bitfield struct,
like `x.a == 5 & x.b & !x.c & x.d == 2` (assuming b is a one-bit value),
and it will be reduced to a single mask and equality check. To
demonstrate a usage of this new reduction, this change ports the trivial
macro IsSimpleObjectMap to Torque. I manually verified that the
generated code for the builtin SetDataProperties, which uses that macro,
is unchanged.
Bug: v8:7793
Change-Id: I4a23e0005d738a6699ea0f2a63f9fd67b01e7026
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2183276
Commit-Queue: Seth Brenith <seth.brenith@microsoft.com>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67948}
The proposal uses the lane shape, e.g. i64x2.anytrue, and we were using
s1x2.anytrue in our opcodes. This was a legacy naming, because we were
trying to bitpack the booleans. Now that we aren't doing that, rename
these to be more consistent with the proposal.
This was done with a straightforward sed script, changing both cpp code
and also some comments in mjsunit test files.
Bug: v8:10506
Change-Id: If077ed805de23520d8580d6b3b1906c80f67b94f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2207915
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67945}
Currently, if d8 is run with the --turbo-profiling flag, it prints info
about every TurboFan-compiled function. This info includes the number of
times that each basic block in the function was run. It also includes
text representations of the function's schedule and code, so that the
person reading the output can associate counters with blocks of code.
The data about each function is currently stored in a
BasicBlockProfiler::Data instance, which is attached to a list owned by
the singleton BasicBlockProfiler. Each Data contains an
std::vector<uint32_t> which represents how many times each block in the
function has executed. The generated code for each block uses a raw
pointer into the storage of that vector to implement incrementing the
counter.
With this change, if you compile with v8_enable_builtins_profiling and
then run with --turbo-profiling, d8 will print that same info about
builtins too.
In order to generate code that can survive being serialized to a
snapshot and reloaded, this change uses counters in the JS heap instead
of a std::vector outside the JS heap. The steps for instrumentation are
as follows:
1. Between scheduling and instruction selection, add code to increment
the counter for each block. The counters array doesn't yet exist at
this point, and allocation is disallowed, so at this point the code
refers to a special marker value.
2. During finalization of the code, allocate a BasicBlockProfilingData
object on the JS heap containing data equivalent to what is stored in
BasicBlockProfiler::Data. This includes a ByteArray that is big
enough to store the counters for each block.
3. Patch the reference in the BuiltinsConstantsTableBuilder so that
instead of referring to the marker object, it now refers to this
ByteArray. Also add the BasicBlockProfilingData object to a list that
is attached to the heap roots so it can be easily accessed for
printing.
Because these steps include modifying the BuiltinsConstantsTableBuilder,
this procedure is only applicable to builtins. Runtime-generated code
still uses raw pointers into std::vector instances. In order to keep
divergence between these code paths to a minimum, most work is done
referring to instances of BasicBlockProfiler::Data (the C++ class), and
functions are provided to copy back and forth between that type and
BasicBlockProfilingData (the JS heap object).
This change is intended only to make --turbo-profiling work consistently
on more kinds of functions, but with some further work, this data could
form the basis for:
- code coverage info for fuzzers, and/or
- hot-path info for profile-guided optimization.
Bug: v8:10470, v8:9119
Change-Id: Ib556a5bc3abe67cdaa2e3ee62702a2a08b11cb61
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2159738
Commit-Queue: Seth Brenith <seth.brenith@microsoft.com>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67944}
Changes:
- Implement the 'let' opcode, as per
https://github.com/WebAssembly/function-references/blob/master/proposals/function-references/Overview.md#local-bindings
- Use a WasmDecoder in place of a plain decoder in OpcodeLength and
AnalyzeLoopAssignment.
- Change ControlBase to accept an additional 'locals_count' parameter.
- Implement required test infrastructure and write some simple tests.
Bug: v8:7748
Change-Id: I39d60d1f0c26016c8f89c009dc5f4119b0c73c87
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2204107
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67937}
The implementation of the StreamingDecoder depends on async compilation.
However, when the --single-threaded flag is set, async compilation is
not available. Therefore V8 does not support streaming compilation at
the moment if the --single-threaded flag is set.
This CL is the first step to support streaming compilation in
--single-threaded mode. This CL makes the StreamingDecoder an abstract
class, and the current implementation a sub-class called
AsyncStreamingDecoder. A follow-up CL will provided a second sub-class
implementation for streaming compilation in --single-threaded mode.
Bug: v8:10548
Change-Id: Ice5c01340d3df18f836a4a05d30571207ca8ccf6
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2208869
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67931}
Math.random, while technically not having any effects which modify the
surrounding JS state, does observably change between a no-side-effects
evaluation and an actual evaluation, and can cause confusion.
Change-Id: I4a41ac6fd3153a14245d5940fe52ada43ca05e0b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2207805
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Gus Caplan <me@gus.host>
Cr-Commit-Position: refs/heads/master@{#67927}
This was introduced by https://crrev.com/c/2207137.
Load offsets can be negative.
Drive-by: Add a helper function to wrap the verbose static casts in
bounds checks.
Bug: chromium:1084872,chromium:1083450
Change-Id: I48934d04a8ab15a8fc347465064b190e32c00716
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2209066
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Auto-Submit: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67924}
Convert wasm-value into internal::WasmValue, then to debug::WasmValue.
This is then copied into a CDP protocol object via a new class,
WasmValueMirror.
Bug: v8:10347
Change-Id: I5778d2cc5701caf82e4a97ac329303e510695b74
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2151130
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Kim-Anh Tran <kimanh@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67908}
This change updates some Torque-defined classes to include more precise
field types where possible. It also updates those classes to use
@generateCppClass. One field was removed because it's unused
(PrototypeInfo::validity_cell), and two fields in StackFrameInfo
actually became less precise because they're based on Script::name,
which is an embedder-provided untyped Local<Value>. (Automatically
generated accessors pointed out this bug easily.)
This change also includes a couple of minor fixes in Torque.
Change-Id: Ib2bc6c7165bb3612b6d344c0686a94165a568277
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2199640
Commit-Queue: Seth Brenith <seth.brenith@microsoft.com>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67907}
Port 18ac08d03c
Original Commit Message:
This is a reland of 3cc981cb7a with a
fix for data race detected by TSan.
Original change's description:
> [wasm][debug] Fix tier down during streaming compilation
>
> If the debugger is enabled while streaming compilation is happening, we
> won't correctly tier down to Liftoff. This is because during streaming
> compilation, we always compile for no debugging. Fixing that is a bit
> tricky, since when the debugger is enabled, functions can either already
> have finished compiling, or they are currently being compiled, or their
> wire bytes are not received yet.
> Instead of handling this correctly while streaming compilation is
> running, we just recompile the whole module with Liftoff after streaming
> compilation finished.
>
> For testing this, we use the existing tests for async compilation, and
> enable --wasm-test-streaming, which compiles via the streaming decoder
> even in the async compilation case.
>
> R=thibaudm@chromium.org
>
> Bug: v8:10531
> Change-Id: I0177248a9ad2e90f83faee965d6746de05423f1f
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2207133
> Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
> Commit-Queue: Clemens Backes <clemensb@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#67882}
R=clemensb@chromium.org, joransiu@ca.ibm.com, jyan@ca.ibm.com, michael_dawson@ca.ibm.com
BUG=
LOG=N
Change-Id: I778a10eaba0016a9e897c8f71ac822c6b421350f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2208901
Commit-Queue: Milad Farazmand <miladfar@ca.ibm.com>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67906}
Registers cannot be used as a merge destination if they have more than
one use, otherwise the merge will unexpectedly affect other uses of that
register.
R=ahaas@chromium.org,clemensb@chromium.org
Bug: chromium:1084151
Change-Id: I0d6ad97c585920357a37d95361e0320d32c71f4b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2208851
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67904}
The typed function references proposal allows an optional second
parameter to Table.grow containing the initialization value for the
newly added entries for tables that do not support null defaults.
This CL adds this functionality but hides it behind a newly added
experimental flag --experimental-wasm-typed-funcref.
R=ahaas@chromium.orgCC=jkummerow@chromium.orgCC=manoskouk@chromium.org
Bug: v8:9495
Change-Id: Ia156aeacf95bc36a9fc182990f315c42075cbb7b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2207184
Commit-Queue: Emanuel Ziegler <ecmziegler@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67900}
This is a reland of 3cc981cb7a with a
fix for data race detected by TSan.
Original change's description:
> [wasm][debug] Fix tier down during streaming compilation
>
> If the debugger is enabled while streaming compilation is happening, we
> won't correctly tier down to Liftoff. This is because during streaming
> compilation, we always compile for no debugging. Fixing that is a bit
> tricky, since when the debugger is enabled, functions can either already
> have finished compiling, or they are currently being compiled, or their
> wire bytes are not received yet.
> Instead of handling this correctly while streaming compilation is
> running, we just recompile the whole module with Liftoff after streaming
> compilation finished.
>
> For testing this, we use the existing tests for async compilation, and
> enable --wasm-test-streaming, which compiles via the streaming decoder
> even in the async compilation case.
>
> R=thibaudm@chromium.org
>
> Bug: v8:10531
> Change-Id: I0177248a9ad2e90f83faee965d6746de05423f1f
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2207133
> Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
> Commit-Queue: Clemens Backes <clemensb@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#67882}
Bug: v8:10531, v8:10544
Change-Id: I884922b6ac55543e6ff9b1046438f6b3abab6f64
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2207187
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67896}
Fix underflow when the break type list is empty, and do not try to
reuse the first value to generate the wanted type.
Bug: chromium:1084452
Change-Id: Ia9855a267730bb9f427518c27157f449475fb6ba
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2208858
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67895}
For single-threaded, we can not tier up in the background. Hence we can
either tier up in foreground (which is pointless), or not tier up.
This CL disables Liftoff, so will compile TurboFan code right away.
R=ahaas@chromium.org
Bug: v8:10530
Change-Id: Icfdc26643ab219d617f844c2ea8e149870168dbc
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2208853
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67894}
TSan handles SIGPROF incorrectly, hence we don't get the samples we
expect on that test, and it quite frequently times out on TSan bots.
Skip it for now, until the TSan issue is fixed.
R=petermarshall@chromium.org
Bug: v8:9869
Change-Id: I27c65cdd10c53b441faad216e00d6c60b42229e6
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2208857
Reviewed-by: Peter Marshall <petermarshall@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67892}
This reverts commit 3cc981cb7a.
Reason for revert: TSan failures: https://ci.chromium.org/p/v8/builders/ci/V8%20Linux64%20TSAN/31572
Original change's description:
> [wasm][debug] Fix tier down during streaming compilation
>
> If the debugger is enabled while streaming compilation is happening, we
> won't correctly tier down to Liftoff. This is because during streaming
> compilation, we always compile for no debugging. Fixing that is a bit
> tricky, since when the debugger is enabled, functions can either already
> have finished compiling, or they are currently being compiled, or their
> wire bytes are not received yet.
> Instead of handling this correctly while streaming compilation is
> running, we just recompile the whole module with Liftoff after streaming
> compilation finished.
>
> For testing this, we use the existing tests for async compilation, and
> enable --wasm-test-streaming, which compiles via the streaming decoder
> even in the async compilation case.
>
> R=thibaudm@chromium.org
>
> Bug: v8:10531
> Change-Id: I0177248a9ad2e90f83faee965d6746de05423f1f
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2207133
> Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
> Commit-Queue: Clemens Backes <clemensb@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#67882}
TBR=clemensb@chromium.org,thibaudm@chromium.org
Change-Id: I26e750c6c6d0783b5e4a0f19a5462a5fbe99a742
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:10531
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2207186
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67885}
If the debugger is enabled while streaming compilation is happening, we
won't correctly tier down to Liftoff. This is because during streaming
compilation, we always compile for no debugging. Fixing that is a bit
tricky, since when the debugger is enabled, functions can either already
have finished compiling, or they are currently being compiled, or their
wire bytes are not received yet.
Instead of handling this correctly while streaming compilation is
running, we just recompile the whole module with Liftoff after streaming
compilation finished.
For testing this, we use the existing tests for async compilation, and
enable --wasm-test-streaming, which compiles via the streaming decoder
even in the async compilation case.
R=thibaudm@chromium.org
Bug: v8:10531
Change-Id: I0177248a9ad2e90f83faee965d6746de05423f1f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2207133
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67882}
So far this is mainly a readability improvement to specify
expectations on the packed argument. In the future we should also
check signedness during bytecode generation.
Drive-by: Update DCHECK to allow signed args to
CHECK_CURRENT_POSITION.
Bug: chromium:1083450
Change-Id: I9376ec691b51eb251c972309ad65dd6c04eec3ae
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2207137
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67880}
The lowering for anytrue was assuming that the input nodes are all
integers. The regression test added in https://crrev.com/c/2194471 calls
anytrue with float operands, this was causing the lowering to generate
cmpl instructions with a float register and an immediate, which is
wrong.
The fix is to use GetReplacementsWithType on the input nodes, but
only if the input were floats, since we use Word32Equal.
Drive-by clean up of comments in the aforementioned regression test.
Bug: v8:10535
Change-Id: I4de89516c178e9003a4c745808d831be87918381
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2203400
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Reviewed-by: Bill Budge <bbudge@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67878}
The codegen uses a bunch of vpmax to try and keep set bits around. The
datatype for vpmax does not need to change for each instruction, since
vpmax U32 will persist set bits just as well. This simplifies the
instruction sequences for S1x8 and S1x16 anytrue.
I added a test to check a special case when a f64x2 contains -0.0 (top
bit set). A previous attempt to optimize codegen used floating point
compare, which does not distinguish between 0.0 and -0.0. So -0.0 will
compare equals to 0.0, and incorrect return 0 for anytrue.
Change-Id: I66013796af08a666009e6b2d774ea7ee7bdfe1ad
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2203113
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Reviewed-by: Bill Budge <bbudge@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67875}
Asynchronicity can be tricky, in particular if the debugger is enabled
while wasm compilation is happening.
We seem to have open issues in streaming compilation there. As a first
step, which CL adds more tests for async compilation (non-streaming).
R=thibaudm@chromium.org
Bug: v8:10531
Change-Id: Idf16790a91aad437ceb981485512a2f52b791bac
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2206736
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67865}
... and other unused methods.
Bug: v8:9708
Change-Id: Ie3658878024fcddcd5503c6462e5ad873eba19b0
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2206733
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Auto-Submit: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67859}
Makes it clearer what this does. Added comments to explain it.
Change-Id: I90b0686f8a607cea32c482591b924e9103f7f445
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2205693
Commit-Queue: Simon Zünd <szuend@chromium.org>
Auto-Submit: Peter Marshall <petermarshall@chromium.org>
Reviewed-by: Simon Zünd <szuend@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67846}
Changes:
Cleanup:
- Make sure read_value_type has the same interface as other
read_* functions, i.e., returns the decoded value and writes
the consumed length into a pointer.
- DecodeLocals is now an instance method.
- DecodeLocals should fail when given a wrong number of locals.
Add tests to catch that.
- Fix a buggy test.
Refactoring in preparation of introducing the 'let'
instruction as per [wasm-gc]:
- DecodeLocals does not consume any input and can start from any pc.
- DecodeLocals gives the option of not appending the decoded
locals to local_types_.
- Separate locals initialization from signature.
Bug: v8:7748
Change-Id: Iaaff87fdb9abe0ddd716484ea3fa87779d2d1a2f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2202992
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67845}
This allows embedding objects in each other and recursively trace
through them.
Bug: chromium:1056170
Change-Id: I4e4ae4c1669109c01003cb6b69797cf271a74033
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2198977
Reviewed-by: Omer Katz <omerkatz@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67841}
GraphAssembler creates Phi nodes and creates additional inputs to them
depending on how many jumps go there. If the typer decorator is active,
it will type the Phi node at creation time. GraphAssembler was not aware
of types (until recently it was not used while the graph is typed) and
did not update the Phi type with each new input. This CL fixes that.
Bug: chromium:1082704
Change-Id: Id94bcda752c7b3dc836eb2b6c6b55b1690185a09
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2202978
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Reviewed-by: Nico Hartmann <nicohartmann@chromium.org>
Commit-Queue: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67823}
The bool specialization of DataRange::get was removed recently as it is
not used anymore. Add a static assert to ensure that we do not run into
the undefined behavior that this specialization was meant to prevent.
R=clemensb@chromium.org
Change-Id: I43abfe03c6fa4722b1dafc0025eb0bdff5379337
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2202979
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67816}
Load extends always load 64-bits. Previously, we were setting the max
alignment to be the size_log_2 of the load_type. For LoadExtends the
load_type indicates what the lane size to be extended is, *NOT* the size
to be loaded.
Bug: chromium:1082848
Change-Id: I0c4115ea6ec916211b03afdb83376ccc05c0c244
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2202721
Reviewed-by: Bill Budge <bbudge@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67815}
The scheduler could schedule unreachable nodes on two basic blocks that
later merge. Update DCHECK in graph-assembler's basic block updater to
only check for the self-containedness of unreachable basic blocks
removed from the schedule after all the blocks have been re-written to
allow for this case.
BUG=chromium:1079446,v8:9684
Change-Id: I91899dbf389e4425542dbd2b1ca95c3f6ad79c05
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2196354
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67812}
Splits out all of PagedSpace and subclasses into paged-spaces.h. Also
moves CodeObjectRegistry to code-object-registry.h.
Bug: v8:10473, v8:10506
Change-Id: I35fab1e545e958eb32f3e39a5e2ce8fb087c2a53
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2201763
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Dan Elphick <delphick@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67811}
The --no-wasm-async-compilation disabled async compilation so far, but
async compilation was still possible over streaming compilation. With
this CL, also streaming compilation is disabled.
R=clemensb@chromium.org
Bug: v8:9760
Change-Id: I7e8d4db9e3bb960e8e7380e2190409f63b2f1968
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2199343
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67807}
The devtools frontend used this to set a lower interval (100us). Now the
frontend will stop setting this category and we will always profile
with 100us (which was already the default).
Bug: chromium:1082220
Change-Id: Iaa671d9750ad4c13b95c2c1ba1e433a1077c858a
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2198989
Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
Commit-Queue: Peter Marshall <petermarshall@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67805}
This reverts commit 580917d252.
Reason for revert: fix in patchset 2
Original change's description:
> Revert "cppgc: Stack scanning using ObjectStartBitmap"
>
> This reverts commit d3a72e3c2a.
>
> Reason for revert: MSAN failures (https://ci.chromium.org/p/v8/builders/ci/V8%20Linux%20-%20arm64%20-%20sim%20-%20MSAN/32360)
>
> Original change's description:
> > cppgc: Stack scanning using ObjectStartBitmap
> >
> > This CL implements stack scanning for cppgc.
> > Given a value on the stack, the MarkingVisitor uses
> > PageBackend::Lookup to checks whether that address is on
> > the heap. If it is, BasePage::TryObjectHeaderFromInnerAddress
> > (introduced in this CL) is used to get the relevant object
> > header. Note that random addresses on the heap might point to
> > free memory, object-start-bitmap, etc.
> >
> > If a valid object header is found:
> > * If the object is not in construction, the GCInfoIndex is used
> > the get the relevant Trace method and the object is traced.
> > * Otherwise, the object is conservatively scanned - i.e. the
> > payload of the object is iterated word by word and each word is
> > treated as a possible pointer.
> >
> > Only addresses pointing to the payload on non-free objects are
> > traced.
> >
> > BasePage::TryObjectHeaderFromInnerAddress assumes on LAB on the
> > relevant space, thus all LABs are reset before scanning the stack.
> >
> > Bug: chromium:1056170
> > Change-Id: I172850f6f1bbb6f0efca8e44ad8fdfe222977b9f
> > Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2190426
> > Commit-Queue: Omer Katz <omerkatz@chromium.org>
> > Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
> > Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
> > Reviewed-by: Anton Bikineev <bikineev@chromium.org>
> > Cr-Commit-Position: refs/heads/master@{#67795}
>
> TBR=ulan@chromium.org,mlippautz@chromium.org,bikineev@chromium.org,omerkatz@chromium.org
>
> Change-Id: I3caef6f9f55911fd1a86e895c3495d1b98b1eac2
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Bug: chromium:1056170
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2201136
> Reviewed-by: Leszek Swirski <leszeks@chromium.org>
> Commit-Queue: Leszek Swirski <leszeks@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#67796}
TBR=ulan@chromium.org,mlippautz@chromium.org,leszeks@chromium.org,bikineev@chromium.org,omerkatz@chromium.org
# Not skipping CQ checks because this is a reland.
Bug: chromium:1056170
Change-Id: If7ea4fe5cb794c07544d5545f5d6548e3375d3ae
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2201137
Reviewed-by: Omer Katz <omerkatz@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Anton Bikineev <bikineev@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Commit-Queue: Omer Katz <omerkatz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67803}
The existing non-builtin implementation is returning wrong results.
For example, given the value 63 as a uint8_t it returns 38 (should be 6).
The new implementation follows the naive algorithm presented in figure 5-1
in Hacker's Delight section 5-1.
Note that the algorithm in the book is designed for 32 bit numbers, so we
extended it to support 64 bit as well.
Bug: chromium:1056170
Change-Id: I8fed9c449f80b01b8cc93d339529c0e1e0863fc0
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2199345
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Anton Bikineev <bikineev@chromium.org>
Commit-Queue: Omer Katz <omerkatz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67801}
This reverts commit d3a72e3c2a.
Reason for revert: MSAN failures (https://ci.chromium.org/p/v8/builders/ci/V8%20Linux%20-%20arm64%20-%20sim%20-%20MSAN/32360)
Original change's description:
> cppgc: Stack scanning using ObjectStartBitmap
>
> This CL implements stack scanning for cppgc.
> Given a value on the stack, the MarkingVisitor uses
> PageBackend::Lookup to checks whether that address is on
> the heap. If it is, BasePage::TryObjectHeaderFromInnerAddress
> (introduced in this CL) is used to get the relevant object
> header. Note that random addresses on the heap might point to
> free memory, object-start-bitmap, etc.
>
> If a valid object header is found:
> * If the object is not in construction, the GCInfoIndex is used
> the get the relevant Trace method and the object is traced.
> * Otherwise, the object is conservatively scanned - i.e. the
> payload of the object is iterated word by word and each word is
> treated as a possible pointer.
>
> Only addresses pointing to the payload on non-free objects are
> traced.
>
> BasePage::TryObjectHeaderFromInnerAddress assumes on LAB on the
> relevant space, thus all LABs are reset before scanning the stack.
>
> Bug: chromium:1056170
> Change-Id: I172850f6f1bbb6f0efca8e44ad8fdfe222977b9f
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2190426
> Commit-Queue: Omer Katz <omerkatz@chromium.org>
> Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
> Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
> Reviewed-by: Anton Bikineev <bikineev@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#67795}
TBR=ulan@chromium.org,mlippautz@chromium.org,bikineev@chromium.org,omerkatz@chromium.org
Change-Id: I3caef6f9f55911fd1a86e895c3495d1b98b1eac2
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:1056170
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2201136
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67796}
This CL implements stack scanning for cppgc.
Given a value on the stack, the MarkingVisitor uses
PageBackend::Lookup to checks whether that address is on
the heap. If it is, BasePage::TryObjectHeaderFromInnerAddress
(introduced in this CL) is used to get the relevant object
header. Note that random addresses on the heap might point to
free memory, object-start-bitmap, etc.
If a valid object header is found:
* If the object is not in construction, the GCInfoIndex is used
the get the relevant Trace method and the object is traced.
* Otherwise, the object is conservatively scanned - i.e. the
payload of the object is iterated word by word and each word is
treated as a possible pointer.
Only addresses pointing to the payload on non-free objects are
traced.
BasePage::TryObjectHeaderFromInnerAddress assumes on LAB on the
relevant space, thus all LABs are reset before scanning the stack.
Bug: chromium:1056170
Change-Id: I172850f6f1bbb6f0efca8e44ad8fdfe222977b9f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2190426
Commit-Queue: Omer Katz <omerkatz@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Anton Bikineev <bikineev@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67795}
There should be a space between the quantity and the unit symbol
as per the SI, so this commit fixes this issue.
Change-Id: I3356942391d96906f3e3840c7bb802e10f29eb4a
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2190230
Commit-Queue: Yang Guo <yangguo@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67789}
This is needed to trace objects found durinbg stack scanning.
Bug: chromium:1056170
Change-Id: I1280d98f2fe69281c514b3a7d4a57f909a2eed96
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2190425
Commit-Queue: Omer Katz <omerkatz@chromium.org>
Reviewed-by: Anton Bikineev <bikineev@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67788}
The AVX implementation does not have dst == input(0), so the vminps call
was wrong. The intention is to compare the 2 input operands.
Bug: chromium:1081030
Change-Id: Id54074327a6aca4b75988fc9d85beccfeabfc791
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2194471
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67786}
... when one of the receivers is a JSArray that may have a read-only
length.
Bug: chromium:1069530
Change-Id: Idbaf1a9030bb5a0f9c25e30925f18f603a99832f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2196353
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67783}
This CL fixes a bug in Liftoff where stack parameters for builtins were
pushed in the reversed order.
CC=bbudge@chromium.orgR=clemensb@chromium.org
Bug: v8:10281
Change-Id: I51ab4f19b0dc3835140ca3c05c98cc82dfe9cac4
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2196341
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67779}
We can't attach a meaningful stack trace to the AggregateError
Promise.any rejects with, but we can augment the individual errors'
stack traces with Promise.any and the index of the corresponding
Promise in the input.
Bug: v8:9808
Change-Id: I7ba754c9b043594decaac8b3a23be74f05c3dffd
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2198983
Commit-Queue: Marja Hölttä <marja@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67778}
Add const Page iterators to Spaces, and add whichever const methods are
necessary for this to work. This and a couple more const methods allows
us to make Heap::Contains const.
Change-Id: I1b63a10575ccdb8a3979aef4fa63a97b288ff836
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2198975
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Ulan Degenbaev <ulan@chromium.org>
Auto-Submit: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67776}
Fold distinct MUL and ADD (or SUB) instructions into a single MLA (or
MLS) instruction, mirroring what is being done for general purpose
registers.
SIMD wasm only uses the vectorized ADD and MUL instructions on quad
vectors (NEON Q), so only those cases are handled.
SIMD wasm only uses MUL by vectors, not by elements so there is no need
to check for an addition and shift reduction.
Change-Id: If07191dde9fb1dc37a5de27187800c15cc4325ea
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2184239
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Reviewed-by: Zhi An Ng <zhin@chromium.org>
Commit-Queue: Martyn Capewell <martyn.capewell@arm.com>
Cr-Commit-Position: refs/heads/master@{#67770}
This is a reland of 902f48bdda, fixed
to avoid lock inversion problems detected by TSan.
Original change's description:
> [wasm][debug] Fix tier down for multiple isolates
>
> If multiple isolates are using the same module, we need to keep it
> tiered down as long as any isolate still has a debugger open.
> Also, we cannot short-cut the {NativeModule::TierDown} method, since the
> previously triggered tier down might not have finished yet.
> For now, each isolate starts an independent tier down (i.e. a full
> recompilation). We could optimize this later by skipping functions that
> are already tiered down, or are already scheduled for tier down, but we
> still need to wait for tier-down to finish on each isolate.
>
> R=thibaudm@chromium.org
>
> Bug: v8:10359
> Change-Id: I7ea6a6f5d3977e48718ac5bc94f9831541f6173f
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2190758
> Commit-Queue: Clemens Backes <clemensb@chromium.org>
> Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#67716}
Bug: v8:10359
Cq-Include-Trybots: luci.v8.try:v8_linux64_tsan_rel
Cq-Include-Trybots: luci.v8.try:v8_linux64_tsan_isolates_rel_ng
Change-Id: Ie98cf073fc79e5c6991df6d4466de7b560274070
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2194451
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67754}
Changes:
- Implement subtyping for eqref.
- (Driveby) Declare more functions as constexpr in ValueType.
- Make minor changes needed to handle ref.eq.
- Write an elementary test.
Bug: v8:7748
Change-Id: I11d54227798ce56de70f3a6f83305b2f80b2f57f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2193715
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67752}
This reverts commit 9d3cca1cd3.
Reason for revert: Only the test needs to be skipped on s390. Refer to this: https://crrev.com/c/1981505
Original change's description:
> s390: [arm] Add missing RELATIVE_CODE_TARGET iteration
>
> Port b766299d2c
> Port 9592b043ee
> Port d915b8d668
>
> Original Commit Message:
>
> Code object iteration was missing logic for RELATIVE_CODE_TARGET
> reloc entries. Garbage collection could thus miss objects that were
> referenced only as targets of pc-relative calls or jumps.
>
> RELATIVE_CODE_TARGETs are only used on arm, mips, and s390 and only
> at mksnapshot-time.
>
> This exposed another issue in that the interpreter entry trampoline
> copy we generate for profiling *did* contain relative calls in
> runtime-accessible code. This is a problem, since code space on arm is,
> by default, too large to be fully addressable through pc-relative
> calls. This CL thus also disables the related
> FLAG_interpreted_frames_native_stack feature on arm.
>
> objects.
>
> R=jgruber@chromium.org, joransiu@ca.ibm.com, jyan@ca.ibm.com, michael_dawson@ca.ibm.com
> BUG=
> LOG=N
>
> Change-Id: Ifbcaed98d90a2730f0d6a8a7d32c621dab1ff5b2
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2087693
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Reviewed-by: Junliang Yan <jyan@ca.ibm.com>
> Commit-Queue: Milad Farazmand <miladfar@ca.ibm.com>
> Cr-Commit-Position: refs/heads/master@{#66644}
TBR=michael_dawson@ca.ibm.com,mlippautz@chromium.org,jyan@ca.ibm.com,jgruber@chromium.org,joransiu@ca.ibm.com,miladfar@ca.ibm.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Change-Id: Id645a9def23d278235ff77f25249d2187e8105ca
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2196521
Reviewed-by: Milad Farazmand <miladfar@ca.ibm.com>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Milad Farazmand <miladfar@ca.ibm.com>
Cr-Commit-Position: refs/heads/master@{#67751}
This CL adds 2 new values to the EmbedderStackState enum with more
explicit names. The old values are updated as aliases to the new
values and marked as soon to be deprecated. This CL also moves the
enum to v8-platform.h so that it can be reused by cppgc.
Depracating individual values in an enum is supported by GCC only
since version 6. Thus new macros were needed for the deprecation
(which delegate to the existing macros when supported). GCC versions
older than 6 are still used by the CQ bots.
Bug: chromium:1056170
Change-Id: Id1ea73edfbbae282b0d8a3bb103dbbbf8ebd417e
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2188971
Commit-Queue: Omer Katz <omerkatz@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67744}
This is a reland of 7f29c48ef6
After fixing TSAN failures in https://crrev.com/c/2192661 and https://crrev.com/c/2193712, this CL and be relanded without changes.
Original change's description:
> [heap] Remove sweeping state in incremental marking
>
> Remove the SWEEPING state from incremental marking. Sweeping is now
> always completed when starting incremental marking. Before this change
> there needed to be a safepoint each for starting marking and completing
> sweeping. Now both happens within a single safepoint.
>
> Bug: v8:10315
> Change-Id: Iad2835554865f2de24376372affe9a98992d1fa0
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2190419
> Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
> Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#67678}
Bug: v8:10315
Change-Id: Ic949d125e72c4d17fd427d08d4b6f9056721eee9
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2196182
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67741}
Prior to this CL we still implemented a HasProperty-GetProperty
sequence when accessing named captures in GetSubstitution. This was
briefly part of the spec (we also threw an exception when the property
was not present), but since late 2017 the GetProperty call has been
unconditional.
See https://tc39.es/ecma262/#sec-getsubstitution.
Bug: v8:10513
Change-Id: Id82c06958b0b0feffc6eede580b99ab8676a0dae
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2195821
Auto-Submit: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Sathya Gunasekaran <gsathya@chromium.org>
Reviewed-by: Sathya Gunasekaran <gsathya@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67733}
There's no need for them to be in NativeContext.
This CL moves the rest of the Promise-related SFIs.
Bug: v8:10482
Change-Id: I7eb926be14bf44fb3cd01cb96b4769eff1c2911b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2190752
Commit-Queue: Marja Hölttä <marja@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67732}
As discussed under https://crrev.com/c/1981505,
Test requires an executable CODE_SPACE and is thus incompatible with
jitless mode.
Change-Id: Icddad50a3484f0cfc5fb4abd7175058d50bc06d3
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2193911
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67726}
Same implementation as the one for x64 in https://crrev.com/c/2186630.
Bug: v8:10501
Change-Id: If2b6c0fdc649afba3449d9579452cf7047a55a54
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2188556
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67721}
This reverts commit 902f48bdda.
Reason for revert: Made TSAN unhappy: https://ci.chromium.org/p/v8/builders/ci/V8%20Linux64%20TSAN%20-%20isolates/9480
Original change's description:
> [wasm][debug] Fix tier down for multiple isolates
>
> If multiple isolates are using the same module, we need to keep it
> tiered down as long as any isolate still has a debugger open.
> Also, we cannot short-cut the {NativeModule::TierDown} method, since the
> previously triggered tier down might not have finished yet.
> For now, each isolate starts an independent tier down (i.e. a full
> recompilation). We could optimize this later by skipping functions that
> are already tiered down, or are already scheduled for tier down, but we
> still need to wait for tier-down to finish on each isolate.
>
> R=thibaudm@chromium.org
>
> Bug: v8:10359
> Change-Id: I7ea6a6f5d3977e48718ac5bc94f9831541f6173f
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2190758
> Commit-Queue: Clemens Backes <clemensb@chromium.org>
> Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#67716}
TBR=clemensb@chromium.org,thibaudm@chromium.org
Change-Id: Ibf650e8b6143471b44f2822c1737e7de5f8bdb20
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:10359
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2194372
Reviewed-by: Shu-yu Guo <syg@chromium.org>
Commit-Queue: Shu-yu Guo <syg@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67720}
This CL is pretty mechanical; I just iterated through some Torque
classes making the following changes:
- Use @generateCppClass if it seems easy to
- Use @generatePrint if the existing printer doesn't do anything special
- Fix up any imprecise field types
It also includes two minor changes to implementation-visitor:
- Add a new -inl.h file with the things needed for
torque-generated/class-definitions-tq.cc so we don't need to keep
changing the compiler when we add @generateCppClass.
- Avoid emitting incorrect accessors for ExternalPointers. This isn't
strictly necessary for correctness, as the accessors defined in C++
already hide the ones inherited from generated code, but it makes me
feel safer.
Change-Id: I4d5a8ba6f86ebff57a0d147619212a3993b087c0
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2185824
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Commit-Queue: Seth Brenith <seth.brenith@microsoft.com>
Cr-Commit-Position: refs/heads/master@{#67719}
... when the element is read-only in one of the prototypes:
* the length should not be updated,
* in strict mode the store operation should throw TypeError.
Bug: chromium:1055138
Change-Id: I7fc08e22c83f8a9848053cfe20851dc1b82f0e3d
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2172090
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67717}
If multiple isolates are using the same module, we need to keep it
tiered down as long as any isolate still has a debugger open.
Also, we cannot short-cut the {NativeModule::TierDown} method, since the
previously triggered tier down might not have finished yet.
For now, each isolate starts an independent tier down (i.e. a full
recompilation). We could optimize this later by skipping functions that
are already tiered down, or are already scheduled for tier down, but we
still need to wait for tier-down to finish on each isolate.
R=thibaudm@chromium.org
Bug: v8:10359
Change-Id: I7ea6a6f5d3977e48718ac5bc94f9831541f6173f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2190758
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67716}
With bounds checks, null checks, and a test case.
Bug: v8:7748
Change-Id: I9e7d68ecd883bd0279f22d11c1dc73cc8716a4cb
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2192659
Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67714}
Scripts aren't callable functions. Even though internally they were for a
while, they aren't anymore. We shouldn't return them to users as if they were.
We already remove strict-mode functions from CallSites, so we now do the same
for internal functions that are created for scripts.
Bug: v8:10508
Change-Id: I270c714524439fba9ad90dd29826bed4811ba2b4
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2193716
Auto-Submit: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Toon Verwaest <verwaest@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67709}
Passing an isolate to {RecompileNativeModule} feels wrong, since
compilation and the generated code are totally isolate-independent. In
fact, the isolate is only used for updating counters.
Instead of passing the counters instead, this CL just refactors the code
to support a nullptr for the counters everywhere (some code paths
already supported that). The few recompilation would not make a
significant difference in the histograms anyway, and even have the risk
of skewing the data.
Drive-by 1: Rename {TierUp} to {StartTierUp} and update comments.
Drive-by 2: Remove non-actionable TODO.
R=thibaudm@chromium.org
Bug: v8:10359
Change-Id: Ic027f939bbc55398b90784922130fe1fe5573b0c
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2187638
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67708}
Implement the instruction ref.as_non_null, as per the wasm gc extension.
Changes:
- Add the respective wasm opcode, move some asmjs opcodes around.
- Add a new type of wasm trap, IllegalCast.
- Modify wasm decoding and compilation pipeline.
- Add a minimal test.
- In wasm-compiler, generalize Unreachable to Trap.
- Optimize struct.get and struct.set for non-null types.
Bug: v8:7748
Change-Id: If2f794306c7cbfabc06e4f64988132346085d6dd
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2187616
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67705}
In the existing code we used a register of the UseScratchRegisterScope
for the destination address. However, this register is needed for the
ParallelRegisterMove as well. With this CL we use fixed registers for
the destination address and the offset as well. The CL also changes the
implementation of CalculateActualAddress to allow to set an explicit
register for the result.
R=clemensb@chromium.org
Bug: v8:10108, chromium:1079449
Change-Id: I39c11b9ffa5f3e937ce4820b9991482ad711b4b0
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2192652
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67702}
This reverts commit 7f29c48ef6.
Reason for revert: Causing TSAN failures on test bots.
Original change's description:
> [heap] Remove sweeping state in incremental marking
>
> Remove the SWEEPING state from incremental marking. Sweeping is now
> always completed when starting incremental marking. Before this change
> there needed to be a safepoint each for starting marking and completing
> sweeping. Now both happens within a single safepoint.
>
> Bug: v8:10315
> Change-Id: Iad2835554865f2de24376372affe9a98992d1fa0
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2190419
> Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
> Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#67678}
TBR=ulan@chromium.org,dinfuehr@chromium.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: v8:10315
Change-Id: I5e76990155cf7aeee3ecefe5e37f9028cb188a00
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2192658
Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67699}
Also, rename the WASM_COMPILED frame type to just WASM.
R=jkummerow@chromium.org
Bug: v8:10389
Change-Id: I71f16f41a69f8b0295ba34bd7d7fad71729546f2
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2187613
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67698}
This reverts commit 8374feed55.
Reason for revert: Breaking mjsunit/global-hash under the stress_snapshot variant, e.g.
https://ci.chromium.org/p/v8/builders/ci/V8%20Linux64%20-%20debug%20-%20fyi/12560
Original change's description:
> [snapshot] rehash JSMap and JSSet during deserialization
>
> To rehash JSMap and JSSet, we simply replace the backing store
> with a new one created with the new hash.
>
> Bug: v8:9187
> Change-Id: I90c25b18b33b7bc2b6ffe1b89fe17aa5f978b517
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2143983
> Commit-Queue: Joyee Cheung <joyee@igalia.com>
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Reviewed-by: Camillo Bruni <cbruni@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#67663}
TBR=cbruni@chromium.org,jgruber@chromium.org,verwaest@chromium.org,joyee@igalia.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: v8:9187
Change-Id: I4a89768c031cd3971eefd9f88528ddd52e1284c9
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2192657
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67696}
This CL adds use counters, as well as the callbacks needed to
register usage during the SIMD origin trial.
Change-Id: I35b7f48277b519b72136f86cf03508adbaa069b8
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2189334
Commit-Queue: Deepti Gandluri <gdeepti@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67690}
All wasm code is compiled now. Hence merge the
{WasmCompiledFrameSummary} into {WasmFrameSummary} and remove the
dispatch. Also, rename {IsWasmCompiled} to {IsWasm} and {AsWasmCompiled}
to {AsWasm}.
R=jkummerow@chromium.org
Bug: v8:10389
Change-Id: I33e413c7d0fa622249563091925b29631472b40c
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2187170
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67689}
