The function "foo" in "base_getter_test" was picking up a left-over
optimised code object from foo's code map, the third time that
base_getter_test was run, instead of optimising it itself. This
broke the assumptions of the test, that each case was functionally
independent from the others, and had started off with empty feedback
and no optimised code.
This breaks the test though, so we have to blacklist it pending a fix
to the root cause (http://crbug.com/v8/6101).
Review-Url: https://codereview.chromium.org/2750623004
Cr-Commit-Position: refs/heads/master@{#43828}
Mark slow tests discovered by manual audit of reported durations.
Slow tests will run first, which will lead to higher test runner throughput.
Also some tests have flaky timeouts occasionally.
BUG=chromium:601468
Change-Id: If9aeb5422e79ff25b867b01c50386a5fdebeb494
Reviewed-on: https://chromium-review.googlesource.com/455736
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43819}
This fixes various allocator methods to properly propagate {nullptr} to
callers without accidentally dereferencing it. We also disable one test
case for stress mode as it runs out of memory due to inlining limits
being lifted in the stress mode.
R=bmeurer@chromium.org
TEST=mjsunit/array-natives-elements
BUG=v8:6061
Change-Id: Id0a7b826a8612d00b4f4ae8aa0bea011c50890ca
Reviewed-on: https://chromium-review.googlesource.com/451365
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43672}
qNaN and sNaN values have different binary representation on MIPS
compared to ARM/x86 architectures. We are skipping these tests because
we can't provide specific NaNs encodings from ARM/x86 architectures.
BUG=
Review-Url: https://codereview.chromium.org/2702213003
Cr-Commit-Position: refs/heads/master@{#43327}
The constant field tracking is still disabled.
BUG=v8:5495
Change-Id: I543fe50b82e2255bbf200ea785ec53e3623e30cb
Reviewed-on: https://chromium-review.googlesource.com/440924
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43304}
Some tests require a lot of memory and they fail on buildbots if they run
in parallel with other tests of the same kind.
We try to limit this by disabling multiple vairants of the same tests,
assuming this would stop the failures in most of the cases.
BUG=
Review-Url: https://codereview.chromium.org/2653603002
Cr-Commit-Position: refs/heads/master@{#42741}
Reason for revert:
Breaks arm64.
Original issue's description:
> [regexp] Store named captures on the regexp result
>
> This implements storing named captures on the regexp result object.
> For instance, /(?<a>.)/u.exec("b") will return a result such that:
>
> result.group.a // "b"
>
> The spec proposal is not yet final, so this may still change in the future.
>
> BUG=v8:5437
>
> Review-Url: https://codereview.chromium.org/2630233003
> Cr-Original-Commit-Position: refs/heads/master@{#42532}
> Committed: 70000946eb
> Review-Url: https://codereview.chromium.org/2630233003
> Cr-Commit-Position: refs/heads/master@{#42570}
> Committed: ee94fa11edTBR=yangguo@chromium.org,littledan@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5437
Review-Url: https://codereview.chromium.org/2639403008
Cr-Commit-Position: refs/heads/master@{#42577}
This implements storing named captures on the regexp result object.
For instance, /(?<a>.)/u.exec("b") will return a result such that:
result.group.a // "b"
The spec proposal is not yet final, so this may still change in the future.
BUG=v8:5437
Review-Url: https://codereview.chromium.org/2630233003
Cr-Original-Commit-Position: refs/heads/master@{#42532}
Committed: 70000946eb
Review-Url: https://codereview.chromium.org/2630233003
Cr-Commit-Position: refs/heads/master@{#42570}
Our test infrastructure ignores missing tests which are listed in
status files. Sometimes, tests are removed and status file lines
are not updated. This patch adds a presubmit check for status
files addressing JavaScript tests to not reference missing tests.
It also cleans up existing violations.
R=machenbach
Review-Url: https://codereview.chromium.org/2610353002
Cr-Commit-Position: refs/heads/master@{#42106}
mjsunit/big-object-literal will exhaust the stack in debug builds,
due to different compiler settings. It will work in optdebug.
This disables for both. Adding an 'optdebug' test to .status files
is easy, but I don't want to contribute to the 'mode x variant explosion'.
R=jochen@chromium.orgCC=franzih@chromium.org, machenbach@chromium.org
Review-Url: https://codereview.chromium.org/2609193002
Cr-Commit-Position: refs/heads/master@{#42061}
This test requires its objects to live in new space, so running it
through gc stress runs just makes it susceptible to flakiness, as
was recently seen when turning on the --harmony-string-padding
flag (which just adds an extra JS file to the bootstrapper sequence).
TBR=ishell@chromium.org, jkummerow@chromium.org
Review-Url: https://codereview.chromium.org/2597543002 .
Cr-Commit-Position: refs/heads/master@{#41876}
The asm-wasm-builder started allocating SharedFunctionInfos,
this makes it bad we'd passed Script by pointer (due to ignorance).
Switching to Handle<Script>.
R=clemensh@chromium.org,titzer@chromium.org
BUG=v8:5716
Review-Url: https://codereview.chromium.org/2552873003
Cr-Commit-Position: refs/heads/master@{#41529}
The reason:
The CL #41255 (https://codereview.chromium.org/2520363002 ) reimplemnt the Number.prototype.toString and the added number-tostring test cases failed at x87.
Similar to many previos fixing CLs, i.e.: CL #37371 (https://codereview.chromium.org/2111493002 ), the root reason is:
The Gcc compiler and it's dependent C++ libraris on linux platform use x87 in extended 80-bit double precision by default.
So the reimplemented DoubleToRadixCString() will generate extended 80-bit double precision result which isn't the expected standard 64-bit double precision
value.
Although modifying DoubleToRadixCString() function to manually do the 80-bit <--> 64-bit conversion for each double/float computation step can fix this issue,
but it wll drop the DoubleToRadixCString() function's performance of other architectures.
This CL put the failed number-tostring test cases into number-tostring-big-integer.js and disables it for x87.
BUG=
Review-Url: https://codereview.chromium.org/2532073002
Cr-Commit-Position: refs/heads/master@{#41322}
In the ParseInfo constructor that takes a SharedFunctionInfo, we must
set the module flag when the function represents a module.
BUG=v8:1569
Review-Url: https://codereview.chromium.org/2525013002
Cr-Commit-Position: refs/heads/master@{#41257}
* Fix setting script-scope variables through inspector by internalizing
their names.
* Reconstruct values of Number, String, and Boolean classes.
* Adapt a couple of tests for API restrictions.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2512963002
Cr-Commit-Position: refs/heads/master@{#41175}
By now the compilation pipeline is flexible enough to run module tests
against all variants, we should no longer choose unsupported compilers
for modules. It also fixes the predicate checking for functions being
"resumable" in the {AstNumberingVisitor} heuristic.
R=neis@chromium.org
BUG=v8:1569
Review-Url: https://codereview.chromium.org/2517143002
Cr-Commit-Position: refs/heads/master@{#41144}
Adapted various tests to restrictions of inspector protocol:
* osr-typing-debug-change: Don't set function variable value.
* debug-evaluate-locals: Add variable introduced by eval, run typeof
inside evaluate().
* regress-419663: Don't set duplicate breakpoints.
* regress-crbug-465298: Compare against function name instead of value.
* regress-crbug-621361: Make evaluate return string results.
* debug-script: Various counts were off due to new way tests are called.
Added new inspector script type.
Breakpoints now contain the actual break position, and remote object
reconstruction has been extended a bit.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2505363002
Cr-Commit-Position: refs/heads/master@{#41129}
With this change, WebAssembly.Memory objects have backing stores allocated as an
8GB region where everything beyond the size of the Wasm heap is inaccessible.
GrowMemory is now implemented by changing the protection on the guard regions to
make the new portions of the heap accessible.
Guard pages are not enabled by default, but this change adds a flag and a test
variant to make sure we get test coverage on them.
BUG= https://bugs.chromium.org/p/v8/issues/detail?id=5277
Review-Url: https://codereview.chromium.org/2396433008
Cr-Commit-Position: refs/heads/master@{#41089}
This adds access to the LiveEdit API object, frame.restart(), and
various breakpoint setters. The LiveEdit API still depends on the JS
debugging context and blocks its removal; but it should be removed
once LiveEdit is rewritten in the midterm.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2503293002
Cr-Commit-Position: refs/heads/master@{#41062}
This CL further extends the debug wrapper, migrates around 60 tests, and
removes a few tests that use functionality we will not support anymore.
In more detail:
* Removed tests that use:
* enable/disable individual breakpoints
* invocationText()
* the ScriptCollected event
* showBreakPoints
* evalFromScript (and similar)
* mirror.constructedBy and mirror.referencedBy
* event_data.promise()
* Some frame.evaluate uses were adapted since due to differences between
remote objects (inspector) and mirrors. For instance, exceptions are
currently not recreated exactly, since the inspector protocol does not
give us the stack and message separately. Other objects (such as
'this' in debug-evaluate-receiver-before-super) need to be explicitly
converted to a string before the test works correctly.
* Ensure that inspector stores the script before sending ScriptParsed and
ScriptFailedToParse events in order to be able to use the script from
within those events.
* Better remote object reconstruction (e.g. for undefined and arrays).
* New functionality in wrapper:
* debuggerFlags().breakPointsActive.setValue()
* scripts()
* execState.setVariableValue()
* execState.scopeObject().value()
* execState.scopeObject().property()
* execState.frame().allScopes()
* eventData.exception()
* eventData.script()
* setBreakPointsActive()
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2497973002
Cr-Commit-Position: refs/heads/master@{#41019}
Fixes incorrect checks for handle validity when checking the compiled
code, as well as incorrect uses of tst in arm and ppc flag checking
code. Also adds a test that the tier-up works correctly.
Reland of https://codereview.chromium.org/2448933002
BUG=v8:5512
Review-Url: https://codereview.chromium.org/2497573003
Cr-Commit-Position: refs/heads/master@{#40930}
This CL adds support for:
* conditional breaks in setBreakpoint,
* locals in frame.local{Count,Name,Value},
* evaluation on a frame in frame.evaluate,
* and more detailed scope information in scopeObject.
Uses of several functions that are not covered by the
inspector protocol and are only used in tests have been removed.
Local handling has been modified to also include arguments as locals.
Inspector differs in this regard from our FrameDetails in that
arguments are always shown as locals. Argument-related functions
were removed.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2491543002
Cr-Commit-Position: refs/heads/master@{#40917}
This stages escape analysis by implying --turbo-escape by the --turbo
flag. It broadens the exposure of the optimization in question.
R=jarin@chromium.org
BUG=v8:4586,v8:5267
Review-Url: https://codereview.chromium.org/1992913005
Cr-Commit-Position: refs/heads/master@{#40859}
This moves all tests currently working with the inspector debugger wrapper to
test/debugger.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2480223002
Cr-Commit-Position: refs/heads/master@{#40824}
This CL adds further support to the test wrapper. We are now able to
run almost all mjsunit/debug-step-* tests using the inspector backend.
debug-stepframe-* tests are not yet supported since inspector does not
know a 'frame' step type.
The interface has also been improved to be able to move these tests to
inspector mostly without modification.
BUG=v8:5330
Review-Url: https://codereview.chromium.org/2466273005
Cr-Commit-Position: refs/heads/master@{#40800}
This exposes a couple of broken tests that used to silently throw within
the listener. Mark these as failing for now
BUG=v8:5330, v8:5581
Review-Url: https://codereview.chromium.org/2460833002
Cr-Commit-Position: refs/heads/master@{#40672}
This enables Ignition unconditionally for all code that is destined for
optimization with TurboFan. This ensures all optimization attempts will
go through the BytecodeGraphBuilder and that the AstGraphBuilder pipe is
dried out in practice.
patch from issue 2427953002 at patchset 120001 (http://crrev.com/2427953002#ps120001)
R=mvstanton@chromium.org,rmcilroy@chromium.org
Review-Url: https://codereview.chromium.org/2453973004
Cr-Commit-Position: refs/heads/master@{#40663}
The assumptions that OSR code is installed on {JSFunction} objects no
longer holds with TurboFan and hence {assertOptimized} can report a
different result dependeing on how OSR code is treated. This is working
as intended.
R=mythria@chromium.org
Review-Url: https://codereview.chromium.org/2453313002
Cr-Commit-Position: refs/heads/master@{#40624}
For instance, when an import cannot be resolved, actually
point at the corresponding import statement.
BUG=v8:1569
Review-Url: https://codereview.chromium.org/2451153002
Cr-Commit-Position: refs/heads/master@{#40594}
This results in a speedup of around 2x. RegExpExec is also ported in
this CL.
BUG=v8:5339
Review-Url: https://codereview.chromium.org/2441993002
Cr-Commit-Position: refs/heads/master@{#40532}
This enables Ignition unconditionally for all code that is destined for
optimization with TurboFan. This ensures all optimization attempts will
go through the BytecodeGraphBuilder and that the AstGraphBuilder pipe is
dried out in practice.
R=mvstanton@chromium.org
Review-Url: https://chromiumcodereview.appspot.com/2427953002
Cr-Commit-Position: refs/heads/master@{#40462}
This test is timing out in gc-stress mode since RegExp.prototype.test
was moved to C++. RE.proto.test will be improved shortly, and this test
should be reenabled then.
BUG=v8:5339
NOTRY=true
Review-Url: https://codereview.chromium.org/2407133002
Cr-Commit-Position: refs/heads/master@{#40150}
The spurious failures were caused by the compiled module
template and its corresponding owning object getting out of
sync due to memory allocations (which may trigger GC)
between the points each were fetched.
Specifically, the {original} was first obtained; then a GC
may happen when cloning the {code_table}. At this point,
the {original}'s owner may have been collected, getting us
down the path of not cloning. When time comes to patch up
globals, we incorrectly try to patch them assuming the
global start is at 0 (nullptr), which in fact it isn't.
This change roots early, in a GC-free area, both objects.
Additionally, it avoids publishing to the instances chain
the new instance until the very end. This way:
- the objects used to create the new instance offer a
consistent view
- the instances chain does not see the object we try to
form. If something fails, we can safely retry.
- since the owner is rooted, the state of the front of the
instances chain stays unchanged - with the same compiled
module we started from. So the early belief that we needed
to clone is not invalidated by any interspersed GC.
This situation suffers from a sub-optimality discussed in
the design document, in that, in a memory constrained
system, the following snippet may surprisingly fail:
var m = new WebAssembly.Module(...);
var i1 = new WebAssembly.Instance(m);
i1 = null;
var i2 = new WebAssembly.Instance(m); //may fail.
This will be addressed subsequently.
BUG=v8:5451
Review-Url: https://codereview.chromium.org/2395063002
Cr-Commit-Position: refs/heads/master@{#40126}
This makes sure we run the module tests against all variants using
Ignition as the first compilation tier. It will henceforth extend the
test coverage to the BytecodeGraphBuilder as well.
R=neis@chromium.org
Review-Url: https://codereview.chromium.org/2397733002
Cr-Commit-Position: refs/heads/master@{#39992}
Ignition collects type feedback for binary and compare operations in type
feedback vector and FCG uses Binary/CompareOpICs to collect type feedback.
The feedback collected by ignition is not used by crankshaft. This hits the
performance, when trying to optimize functions that did not tier upto FCG.
This cl merges the feedback collected by ignition and FCG when passing to
crankshaft.
BUG=v8:4280
Review-Url: https://codereview.chromium.org/2361043002
Cr-Commit-Position: refs/heads/master@{#39753}
Resolve imports and indirect exports at instantiation time.
With this CL we have some basic functionality for modules working. Not yet
supported: star exports, namespace imports, cycle detection, proper variable
initialisation in mutually recursive modules.
BUG=v8:1569
Review-Url: https://codereview.chromium.org/2362083002
Cr-Commit-Position: refs/heads/master@{#39689}
This adds partial support of exports to the runtime system and
to the interpreter. It introduces a new HeapObject JSModule that
maps each of the module's export names to a Cell containing the
exported value.
Several aspects of this implementation are subject to change in
follow-up CLs.
BUG=v8:1569
Committed: https://crrev.com/241a0412eed919395a2e163b30b9b66071ce5c17
Review-Url: https://codereview.chromium.org/2302783002
Cr-Original-Commit-Position: refs/heads/master@{#39341}
Cr-Commit-Position: refs/heads/master@{#39352}
Reason for revert:
Failures related to deopt.
Original issue's description:
> [modules] Basic support of exports
>
> This adds partial support of exports to the runtime system and
> to the interpreter. It introduces a new HeapObject JSModule that
> maps each of the module's export names to a Cell containing the
> exported value.
>
> Several aspects of this implementation are subject to change in
> follow-up CLs.
>
> BUG=v8:1569
>
> Committed: https://crrev.com/241a0412eed919395a2e163b30b9b66071ce5c17
> Cr-Commit-Position: refs/heads/master@{#39341}
TBR=adamk@chromium.org,rmcilroy@chromium.org,ulan@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:1569
Review-Url: https://codereview.chromium.org/2328283002
Cr-Commit-Position: refs/heads/master@{#39345}
This adds partial support of exports to the runtime system and
to the interpreter. It introduces a new HeapObject JSModule that
maps each of the module's export names to a Cell containing the
exported value.
Several aspects of this implementation are subject to change in
follow-up CLs.
BUG=v8:1569
Review-Url: https://codereview.chromium.org/2302783002
Cr-Commit-Position: refs/heads/master@{#39341}
Adds support to collect allocation site feedback for Array function calls
to the call bytecode handler.
BUG=v8:4280, v8:4780
LOG=N
Review-Url: https://codereview.chromium.org/2307903002
Cr-Commit-Position: refs/heads/master@{#39283}
In ignition, allocation site mementos were disabled when creating array
literals. Enabled them in this cl.
BUG=v8:4280
LOG=N
Review-Url: https://codereview.chromium.org/2294913006
Cr-Commit-Position: refs/heads/master@{#39234}
Collect type feedback in the bytecode handler for 'new' bytecode. The
earlier cl (https://codereview.chromium.org/2153433002/) was reverted
because that implementation did not collect allocation site feedback.
This regressed delta blue by an order of magnitude. This implementation
includes collection of allocation site feedback.
Reland of https://codereview.chromium.org/2190293003/ with a bug fix.
BUG=v8:4280, v8:4780
LOG=N
Review-Url: https://codereview.chromium.org/2225923003
Cr-Commit-Position: refs/heads/master@{#39120}
This patch arranges that property names are parsed in a single pass,
reporting the name as well as the type of the property, instead of
parsing qualifiers like 'static' or 'get' initially as names and then
re-parsing. This change is easier to reason about, very slightly (4%)
faster in some cases (although slower in other, less common ones, though
this slowdown will be fixed in an upcoming patch), and is a prerequisite
for separating the parsing of object and class literal properties, which
will become increasingly important as ECMAScript adds more class features.
This is a reland of https://codereview.chromium.org/2278153004/,
which fixes the issue causing the revert and adds more tests.
Review-Url: https://codereview.chromium.org/2300503002
Cr-Commit-Position: refs/heads/master@{#39056}
This makes sure the deoptimizer picks bytecode prepared for debugging
when materializing an interpreted frame if one is available. This is
normally done by the interpreter entry trampoline and hence needs to be
replicated by the deoptimizer.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2271443003
Cr-Commit-Position: refs/heads/master@{#38815}
This flag was shipped on in 52, so it's due for removal. The patch includes
removing the deprecated and unused-in-Blink API Promise::Chain, and many
test updates.
R=adamk@chromium.org
BUG=v8:4633
Review-Url: https://codereview.chromium.org/2267033002
Cr-Commit-Position: refs/heads/master@{#38804}
Unskip test which failed with Intl support disabled, and avoid using Intl
objects within the test.
BUG=chromium:634273,chromium:634357,v8:5162
NOTRY=true
R=mstarzinger@chromium.org
Review-Url: https://codereview.chromium.org/2218743003
Cr-Commit-Position: refs/heads/master@{#38384}
Reason for revert:
[Sheriff] Fails on nosnap debug:
https://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20nosnap%20-%20debug/builds/8403
Original issue's description:
> [Interpreter] Collect type feedback for 'new' in the bytecode handler
>
> Collect type feedback in the bytecode handler for 'new' bytecode. The
> earlier cl (https://codereview.chromium.org/2153433002/) was reverted
> because that implementation did not collect allocation site feedback.
> This regressed delta blue by an order of magnitude. This implementation
> includes collection of allocation site feedback.
>
> BUG=v8:4280, v8:4780
> LOG=N
>
> Committed: https://crrev.com/9d5e6129c4c7f9cbfe81a5fad2a470f219fe137c
> Cr-Commit-Position: refs/heads/master@{#38364}
TBR=bmeurer@chromium.org,rmcilroy@chromium.org,balazs.kilvady@imgtec.com,mythria@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280, v8:4780
Review-Url: https://codereview.chromium.org/2212343002
Cr-Commit-Position: refs/heads/master@{#38368}
Collect type feedback in the bytecode handler for 'new' bytecode. The
earlier cl (https://codereview.chromium.org/2153433002/) was reverted
because that implementation did not collect allocation site feedback.
This regressed delta blue by an order of magnitude. This implementation
includes collection of allocation site feedback.
BUG=v8:4280, v8:4780
LOG=N
Review-Url: https://codereview.chromium.org/2190293003
Cr-Commit-Position: refs/heads/master@{#38364}
This adds the possibility to address test cases in the
status file with the variant under which the test is running.
This is only allowed in top-level sections.
Example:
[{
'test-case': [PASS, SLOW],
}]
['variant == foo', {
'test-case': [FAIL],
}]
The test case "test-case" is marked as slow in all variants.
Additionally, in variant foo, it'll be expected to fail.
This CL also exemplifies the new feature with test cases
running under the ignition_turbofan variant. The
corresponding legacy flag is deprecated.
BUG=v8:5238
Review-Url: https://codereview.chromium.org/2203013002
Cr-Commit-Position: refs/heads/master@{#38342}
The flag was introduced for ignition development. It can only
be used when running ignition tests in isolation on the bots.
The bots only use ignition_turbo in isolation since a while
and don't pass the --ignition flag anymore.
BUG=v8:5238
Review-Url: https://codereview.chromium.org/2197123002
Cr-Commit-Position: refs/heads/master@{#38206}
This adds preliminary support for on-stack replacement from Ignition to
optimized code generated by TurboFan to the runtime profiler. Involved
heuristics (e.g. code size allowance) have been taken from existing code
without any re-evaluation in the new setting.
R=rmcilroy@chromium.org
BUG=v8:4764
Review-Url: https://codereview.chromium.org/2182183005
Cr-Commit-Position: refs/heads/master@{#38159}
This CL more or less reverts commit https://codereview.chromium.org/2107733002/
The use of the MathPow code stub that was introduced by that commit caused
problems on arm64, and the MathPow code stub was also an obstacle in the
implementation of parallel code generation.
In addition this CL turns on the mjsunit/wasm/embenchen tests for arm64
which were turned off because of problems with MathPow on arm64.
R=titzer@chromium.org, bradnelson@chromium.org
Review-Url: https://codereview.chromium.org/2166793002
Cr-Commit-Position: refs/heads/master@{#37911}
In int32 multiplication, if we have a positive integer as input, then we know we can't produce a -0 answer. The same is true if truncation is applied (x * y | 0). Without this information, we have to rather annoyingly check if the result of multiplication is 0, then OR the inputs to check for negativity, and possibly return -0. In TurboFan, we'll deopt in this case.
BUG=
Review-Url: https://codereview.chromium.org/2154073002
Cr-Commit-Position: refs/heads/master@{#37831}
This makes sure the {AstGraphBuilder} respects the catch-prediction that
is provided by the parser along with each {TryStatement}. This is needed
for try-blocks materialized by the parser not to influence predictions
users expect when using the debugger.
R=neis@chromium.org
TEST=mjsunit/debug-exceptions
BUG=v8:5183
Review-Url: https://codereview.chromium.org/2147573002
Cr-Commit-Position: refs/heads/master@{#37702}
This solves an issue with throws inside for-of always being marked as caught.
BUG=v8:5183
Review-Url: https://codereview.chromium.org/2146493002
Cr-Commit-Position: refs/heads/master@{#37686}
This removes the checking for use-def and def-use chain links from the
graph verification. Presence of such links can only be violated by a bug
in the actual {Node} implementation itself. That container class is also
covered by unit tests.
The verification in question was useful in the early days when the graph
implementation itself was prone to bugs. By now it has stabilized and
spending O(n^2) time during graph verification is too wasteful to still
be considered a reasonable trade-off.
R=jarin@chromium.org
TEST=unittests/NodeTest.*
Review-Url: https://codereview.chromium.org/2140973003
Cr-Commit-Position: refs/heads/master@{#37670}
This enables tests which rely on the context available at "debugger"
statements to be accurate. This is the case by now when deoptimization
information is available.
R=yangguo@chromium.org
BUG=v8:4055
Review URL: https://codereview.chromium.org/2129123002 .
Cr-Commit-Position: refs/heads/master@{#37604}
This enables tests which rely on the context available at "debugger"
statements to be accurate. This is the case by now when deoptimization
information is available.
R=mvstanton@chromium.org
BUG=v8:4035
Review-Url: https://codereview.chromium.org/2125773005
Cr-Commit-Position: refs/heads/master@{#37590}
While the test was useful to reproduce the issue locally it creates a lot of
heap pressure and causes all sorts of troubles (OOM, slowness) on the bots, so
let's drop it.
R=hpayer@chromium.org
Review-Url: https://codereview.chromium.org/2127803002
Cr-Commit-Position: refs/heads/master@{#37551}
The dependency would only happen if we have a smi overflow for the length and
have create a heap number. In this case the heap number would've to survive
until the array buffer is collected.
To avoid this dependency we track the length (as we previously used to).
BUG=chromium:625752
LOG=N
TEST=test/mjsunit/regress/regress-625752.js
R=hpayer@chromium.org
This reverts commit 1791d7bb9a.
Review-Url: https://codereview.chromium.org/2127643002
Cr-Commit-Position: refs/heads/master@{#37537}
The re-typer now only types a node if its inputs are all typed with the
exception of phi nodes. This works because all cycles in the graph have
to contain a phi node.
BUG=chromium:625558
Review-Url: https://codereview.chromium.org/2120243002
Cr-Commit-Position: refs/heads/master@{#37493}
A pointer comparison on the effect path states is not sufficient to
guarantee termination; we really need to check the actual nodes to
make sure we terminate properly, similar to what BranchElimination
does.
R=jarin@chromium.org
BUG=v8:5161
Review-Url: https://codereview.chromium.org/2112463002
Cr-Commit-Position: refs/heads/master@{#37389}
Lowering of Int64Load, Int64Store, BitcastInt64ToFloat64 and
BitcastFloat64ToInt64 was using LE word ordering in memory,
causing failures on some tests.
BUG=mjsunit/regress/regress-599719,mjsunit/regress/regress-599717
Review-Url: https://codereview.chromium.org/2080213004
Cr-Commit-Position: refs/heads/master@{#37213}
These simplified operators are used to perform the hole checks when
loading elements from a holey array. Depending on the CheckHoleMode,
they either return the hole as undefined or some NaN, or deoptimize
if the value is the hole or the hole NaN.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2066223002
Cr-Commit-Position: refs/heads/master@{#37001}
This test gets slower with tsan when the print() calls
in the tests are deleted. It is also only very slow with
crankshaft not with turbofan, but we have no config atm
to only run it with turbofan.
TBR=ishell@chromium.org, ahaas@chromium.org
NOTRY=true
Review-Url: https://codereview.chromium.org/2049993003
Cr-Commit-Position: refs/heads/master@{#36859}
An additional slide offset is exported into `shared-library`, which is used to
symbolize C++ stack on systems with ASLR (OS X).
This patch adds slide offset support in dumpcpp script.
BUG=v8:5048
Review-Url: https://codereview.chromium.org/2006813002
Cr-Commit-Position: refs/heads/master@{#36574}
Ordinary arrow functions have 'undefined' in their frame's receiver.
Generators restore the receiver to the frame based on one passed in
when they are constructed in CreateJSGeneratorObject.
This patch makes async arrow functions pass in 'undefined' for their
receiver so that they have the same behavior as ordinary arrow
functions, which avoids the issue of encountering TDZ when calling
an async arrow function in a subclass constructor before a super
call has returned.
BUG=v8:4483
Review-Url: https://codereview.chromium.org/1976813002
Cr-Commit-Position: refs/heads/master@{#36264}
The previous approach taken by FastNew[Sloppy,Strict,Rest]ArgumentsStub
looked at the function slot in order to skip stub frames
and find the JS frame. However, stub frames do not have a
function slot (in fact their fixed frame ends one slot
before the JS frame's function slot). Therefore, if this
location in the stub frame happens to have the function
object the create arguments stubs won't skip this frame
correctly.
Replace this approach with one where the stub is
specialized to either skip a frame if required (since
there will only ever be one extra frame on Ignition
the loop approach isn't necessary).
BUG=v8:4928
LOG=N
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux_nosnap_dbg
Review-Url: https://codereview.chromium.org/1949023003
Cr-Commit-Position: refs/heads/master@{#36181}
This implements declaration of lookup slots for variables and functions
within optimized code. Such a declaration only appears with top-level
eval code, which we only recently started handling in TurboFan.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/1962723002
Cr-Commit-Position: refs/heads/master@{#36125}
mjsunit/es6/mirror-collections fails with ignition because dead registers
may hold references to objects. This prevents GC from collecting
otherwise dead objects. Dead registers are not cleared because the cost
of clearing them outweighs its benefits. Hence, modifying this test to
work around this problem.
BUG=v8:4280,v8:4853
LOG=N
Review-Url: https://codereview.chromium.org/1945223002
Cr-Commit-Position: refs/heads/master@{#36098}
Some tests which fail with '--ignition --turbo --turbo-from-bytecode' pass with
just '--ignition'. Unskip these tests. Also group other tests with related
bugs.
BUG=v8:4680
LOG=N
Review-Url: https://codereview.chromium.org/1944413002
Cr-Commit-Position: refs/heads/master@{#36083}
The compilation pipeline is correctly guarding against accidental
tier-ups by now, the tests in question should no longer fail.
R=yangguo@chromium.org
BUG=v8:4961
LOG=n
Review-Url: https://codereview.chromium.org/1938983002
Cr-Commit-Position: refs/heads/master@{#35934}
This adds ignition to the testing variants that are run on all
bots.
Failing tests can only be skipped with the NO_IGNITION
keyword in status files. Existing expectations for the
ignition_turbofan variant are all duplicated and use the
NO_IGNITION keyword as well now.
BUG=v8:4280
LOG=N
Committed: https://crrev.com/132c09ed619f23fb7c6d26a4e3552c703389eabd
Cr-Commit-Position: refs/heads/master@{#35865}
Review-Url: https://codereview.chromium.org/1804003002
Cr-Commit-Position: refs/heads/master@{#35926}
This ensures that the TurboFan pipeline is respecting the flag on the
CompilationInfo controlling whether to use the BytecodeGraphBuilder or
the AstGraphBuilder when ensuring deoptimization support.
R=rmcilroy@chromium.org
BUG=chromium:607871
LOG=n
Review-Url: https://codereview.chromium.org/1934563002
Cr-Commit-Position: refs/heads/master@{#35904}
This adds a dedicated flag for enabling the BytecodeGraphBuilder. The
intention is to be explicit when this variant is being tested and to
avoid unnecessary overhead in production code for a configuration that
is not yet shipping.
R=rmcilroy@chromium.org
Review-Url: https://codereview.chromium.org/1925123002
Cr-Commit-Position: refs/heads/master@{#35892}
Reason for revert:
Will resubmit with proper fix and more test skips.
Original issue's description:
> [Ignition] Test ignition on all bots.
>
> This adds ignition to the testing variants that are run on all
> bots.
>
> Failing tests can only be skipped with the NO_IGNITION
> keyword in status files. Existing expectations for the
> ignition_turbofan variant are all duplicated and use the
> NO_IGNITION keyword as well now.
>
> BUG=v8:4280
> LOG=N
> NOTRY=true
TBR=rmcilroy@chromium.org,mstarzinger@chromium.org,yangguo@chromium.org,mythria@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280
Review-Url: https://codereview.chromium.org/1930943002
Cr-Commit-Position: refs/heads/master@{#35871}
This adds ignition to the testing variants that are run on all
bots.
Failing tests can only be skipped with the NO_IGNITION
keyword in status files. Existing expectations for the
ignition_turbofan variant are all duplicated and use the
NO_IGNITION keyword as well now.
BUG=v8:4280
LOG=N
NOTRY=true
Review-Url: https://codereview.chromium.org/1804003002
Cr-Commit-Position: refs/heads/master@{#35865}
This adds a new ignition_turbofan testing variant that'll
allow switching turbofan off in the other ignition variant.
The switch will happen in a follow up after reconfiguring
the bots.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1922623003
Cr-Commit-Position: refs/heads/master@{#35790}
These operators are really pure on the JavaScript level, and were only
part of the effect chain to make sure we don't accidentially schedule
them right after raw allocations, which is no longer an issue since we
now have the concept of atomic regions.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1893543004
Cr-Commit-Position: refs/heads/master@{#35552}
This patch correctly re-scopes inner scopes that can appear in do
expressions used as initializers to arrow parameters.
R=rossberg@chromium.org
BUG=v8:4904
LOG=N
Review URL: https://codereview.chromium.org/1887743002
Cr-Commit-Position: refs/heads/master@{#35542}
This moves the responsibility of preparing full-codegen code with
deoptimization support into the backends. This avoids generating such
code when optimization can be done directly from existing bytecode.
R=bmeurer@chromium.org
BUG=v8:4280
LOG=n
Review URL: https://codereview.chromium.org/1883403002
Cr-Commit-Position: refs/heads/master@{#35517}
Removes skips for two tests that no longer fail on windows system.
Updates description of another failing test with more details.
BUG=v8:4280,v8:4680
LOG=N
Review URL: https://codereview.chromium.org/1878893004
Cr-Commit-Position: refs/heads/master@{#35475}
This change implements switch as a balanced if/else tree or break table or
hybrid. A lot of asm.js modules are expected to extensively use switch
alongside function tables that can benefit from a better implementation.
BUG=v8:4203
TEST=mjsunit/asm-wasm
R=titzer@chromium.org,bradnelson@chromium.org,ahaas@chromium.org
LOG=N
Review URL: https://codereview.chromium.org/1838973002
Cr-Commit-Position: refs/heads/master@{#35455}
Introduce a ResumeGeneratorTrampoline, which does the actual stack state
reconstruction (currently always restores a fullcodegen frame), and
introduce appropriate TurboFan builtins for %GeneratorPrototype%.next,
%GeneratorPrototype%.return and %GeneratorPrototype%.throw based on
this native builtin.
Also unify the flooding in case of step-in to always work based on
JSFunction and remove the special casing for JSGeneratorObject.
R=mstarzinger@chromium.org, neis@chromium.orgTBR=rossberg@chromium.org
BUG=chromium:513471
LOG=n
Review URL: https://codereview.chromium.org/1865833002
Cr-Commit-Position: refs/heads/master@{#35283}
In simplified numbering, we make sanity checks based on types (e.g.,
NumberSubtract should take numbers as inputs), but this can be
violated if optimization passes make types less precise.
In this CL, we fix load elimination to make sure that types are
smaller in the store -> load elimination by taking an intersection
of the load's type with the store value's type and inserting a guard
with that type. Note that the load type comes from type feedback, so
it can be disjoint from the stored value type (in that case, this
must be dead code because the map chack for the load should prevent
us from using the stored value).
BUG=chromium:599412
LOG=n
Review URL: https://codereview.chromium.org/1857133003
Cr-Commit-Position: refs/heads/master@{#35259}
Debugger fetches the return value of a function when we break at return.
Interpreter holds the return value in accumulator. This is not stored in a
specified location on stack and hence it is not possible to look it up from
stack similar to full-codegen or optimized frames. This cl adds support to
store the value of accumulator on debug breaks. The value of accumulator is
passed to the runtime function and is then stored in thread local data.
Also changes full-codegen implementation to match that of ignition.
The return value from full-codegen is also stored in thread local data.
The return value is fetched directly thread local data instead of
finding it by iterating over frames.
BUG=v8:4280, v8:4690
LOG=N
Review URL: https://codereview.chromium.org/1842683002
Cr-Commit-Position: refs/heads/master@{#35127}
In JavaScript code and stubs, JSSP mirrors the CSP but may be unaligned.
But in WASM code only CSP is used, like native code, and it must be
aligned.
Calls into WASM from JS need to carefully align the C stack
pointer (csp) and restore the previous JSSP, while calls from WASM
to JS need to compute a new JSSP and restore their CSP after the
call.
R=ahaas@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1811283003
Cr-Commit-Position: refs/heads/master@{#35096}
Makes --ignition cause eager compilation if we aren't building the startup
snapshot.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1811553003
Cr-Commit-Position: refs/heads/master@{#35066}
Reason for revert:
[Sheriff] Seems to break nosnap debug:
https://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20nosnap%20-%20debug/builds/6019
Original issue's description:
> [Interpreter] Adds support to fetch return value on break at return.
>
> Debugger fetches the return value of a function when we break at return.
> Interpreter holds the return value in accumulator. This is not stored in a
> specified location on stack and hence it is not possible to look it up from
> stack similar to full-codegen or optimized frames. This cl adds support to
> store the value of accumulator on debug breaks. The value of accumulator is
> passed to the runtime function and is then stored in thread local data.
>
> Also changes full-codegen implementation to match that of ignition.
> The return value from full-codegen is also stored in thread local data.
> The return value is fetched directly thread local data instead of
> finding it by iterating over frames.
>
> BUG=v8:4280, v8:4690
> LOG=N
>
> Committed: https://crrev.com/fb65527b75754bcf3b173f16f5d0b04a1c6d9b99
> Cr-Commit-Position: refs/heads/master@{#35060}
TBR=rmcilroy@chromium.org,yangguo@chromium.org,weiliang.lin@intel.com,balazs.kilvady@imgtec.com,jyan@ca.ibm.com,mythria@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280, v8:4690
Review URL: https://codereview.chromium.org/1834733002
Cr-Commit-Position: refs/heads/master@{#35065}
Debugger fetches the return value of a function when we break at return.
Interpreter holds the return value in accumulator. This is not stored in a
specified location on stack and hence it is not possible to look it up from
stack similar to full-codegen or optimized frames. This cl adds support to
store the value of accumulator on debug breaks. The value of accumulator is
passed to the runtime function and is then stored in thread local data.
Also changes full-codegen implementation to match that of ignition.
The return value from full-codegen is also stored in thread local data.
The return value is fetched directly thread local data instead of
finding it by iterating over frames.
BUG=v8:4280, v8:4690
LOG=N
Review URL: https://codereview.chromium.org/1818873003
Cr-Commit-Position: refs/heads/master@{#35060}
Fixes CopyBytecodeArray to set the interrupt_budget field.
BUG=v8:4280,v8:4690
LOG=N
Review URL: https://codereview.chromium.org/1809123003
Cr-Commit-Position: refs/heads/master@{#34982}
Add missing conversions from other types to f32 in fround.
Restrict fround() to only float, double, signed, unsigned (no unions / intish).
Restrict Bitwise operations to intish, particularly |0, when not applied to a foreign function.
Adding more exhaustive tests of stdlib Math, move to a separate file.
Adding tests of interesting values for the stdlib asm.js functions.
BUG= https://bugs.chromium.org/p/v8/issues/detail?id=4203
TEST=test-asm-validator,asm-wasm
R=titzer@chromium.org,rossberg@chromium.org
LOG=N
Review URL: https://codereview.chromium.org/1804243003
Cr-Commit-Position: refs/heads/master@{#34967}
Both of them shipped in Chrome 49 without incident.
Also move relevant tests from harmony/ to es6/.
Review URL: https://codereview.chromium.org/1815773002
Cr-Commit-Position: refs/heads/master@{#34964}
In case when F inlined normal call to G which tail calls H we should not write translation for G for the tail call site.
Otherwise we will see G in a stack trace inside H.
This CL also enables all existing tests related to ES6 tail call elimination and adds more combinations.
TBR=bmeurer@chromium.org
BUG=v8:4698
LOG=N
Committed: https://crrev.com/689980f7d4dfd4c29492f616d7b616b86ec9af91
Cr-Commit-Position: refs/heads/master@{#34830}
Review URL: https://codereview.chromium.org/1780043004
Cr-Commit-Position: refs/heads/master@{#34920}
In case when F inlined normal call to G which tail calls H we should not write translation for G for the tail call site.
Otherwise we will see G in a stack trace inside H.
This CL also enables all existing tests related to ES6 tail call elimination.
TBR=bmeurer@chromium.org
BUG=v8:4698
LOG=N
Review URL: https://codereview.chromium.org/1780043004
Cr-Commit-Position: refs/heads/master@{#34830}
The feature was removed from the bots a while ago. It was
superseeded by the flaky-test detection which reruns tests.
Remaining tests still marked as flaky most certainly pass
since a while.
Referencing all the bugs whose expectations lines get
removed by this.
BUG=v8:3838,v8:3525,v8:3125
LOG=n
Review URL: https://codereview.chromium.org/1802983002
Cr-Commit-Position: refs/heads/master@{#34804}
We may not emit bytecode for the evaluation of the to-be-returned
expression. In that case we cannot set two return positions for a return
statement (one before and one after the expression evaluation). This
sets the interpreter apart from full-codegen.
Make sure that we always have the second of the two return positions.
Note that we end up with separate test cases for ignition and FCG.
R=rmcilroy@chromium.org, vogelheim@chromium.org
BUG=v8:4690
LOG=N
Review URL: https://codereview.chromium.org/1801473003
Cr-Commit-Position: refs/heads/master@{#34771}
Modules already have a separate entrypoint into the engine (at the moment,
this is v8::ScriptCompiler::CompileModule, though that will change to
something like ParseModule). This meant that requiring a commandline flag
simply added an extra complexity burden on embedders. By removing the v8
flag, this lets embedders use their own flagging mechanism (such as d8's
"--module", or Blink's RuntimeEnabledFeatures) to control whether
modules are to be used.
Also remove old modules tests that were being skipped (since they test
very old, pre-ES2015 modules syntax).
R=littledan@chromium.org
BUG=v8:1569, chromium:594639
LOG=y
Review URL: https://codereview.chromium.org/1804693002
Cr-Commit-Position: refs/heads/master@{#34764}
FullCodegen generates 2 statement positions for the loop init block, like so:
for(var i = 0; i....
^ ^
This change removes the first of those, updates unit tests,
and removes text expectations for Ignition.
---
An alternative would be to emulate the existing behaviour in Ignition, but:
- The new behaviour seems more logical,
- Ignition generates no bytecodes for the 'var', meaning there is no code position to attach the break position to.
BUG=v8:4690
LOG=Y
Review URL: https://codereview.chromium.org/1784883002
Cr-Commit-Position: refs/heads/master@{#34717}
This is because compiler.cc is awesome. There are cases where we do not
yet have a SharedFunctionInfo that can tell us whether we are compiling
a generator function, we query the FunctionLiteral instead.
R=rmcilroy@chromium.org
BUG=v8:4681
LOG=n
Review URL: https://codereview.chromium.org/1780193002
Cr-Commit-Position: refs/heads/master@{#34677}
This ensures our optimizing compilers as well as the interpreter are
never tasked with compiling the generator-resuming builtin methods. The
corresponding intrinsics for those methods are not supported and it is
not possible to provide a C++ reference implementation for them. We do
this by assigning builtin function ids to them that we can recognize
during the compiler dispatch.
Note that this also affects the interpreter, because methods having a
builtin function id assigned are not interpreted ({function_data} field
is overlapping). If this ever changes we can still do an early check in
the compiler dispatch (similar to the optimizing compilers) easily.
This applies to the following methods:
- Generator.prototype.next (calls Runtime_GeneratorNext).
- Generator.prototype.return (calls Runtime_GeneratorReturn).
- Generator.prototype.throw (calls Runtime_GeneratorThrow).
R=neis@chromium.org
BUG=v8:4681
LOG=n
Review URL: https://codereview.chromium.org/1779123003
Cr-Commit-Position: refs/heads/master@{#34675}
This ensures the interpreter is not tasked with compiling generator
functions. It currently does not support suspending activations at
yielding points, but we still want to be able to activate it for the
rest of JavaScript in the meantime.
R=rmcilroy@chromium.org
BUG=v8:4681
LOG=n
Review URL: https://codereview.chromium.org/1782013002
Cr-Commit-Position: refs/heads/master@{#34672}
The current implementation does not consider the case when the context of
the control scope and the current context differ. It is possible that they are
different in some cases for example: with statements. This cl fixes this.
BUG=v8:4280,v8:4680
LOG=N
Review URL: https://codereview.chromium.org/1768123002
Cr-Commit-Position: refs/heads/master@{#34609}
This mechanism was used to ensure that functions ended up as constants on the map of prototypes defined using object literals, e.g.,:
function.prototype = {
method: function() { ... }
}
Nowadays we treat prototypes specially, and make all their functions constants when an object turns prototype. Hence this special custom code isn't necessary anymore.
This also affects boilerplates that do not become prototypes. Their functions will not be constants but fields instead. Calling their methods will slow down. However, multiple instances of the same boilerplate will stay monomorphic. We'll have to see what the impact is for such objects, but preliminary benchmarks do not show this as an important regression.
BUG=chromium:593008
LOG=n
Review URL: https://codereview.chromium.org/1772423002
Cr-Commit-Position: refs/heads/master@{#34602}
BailoutId points to the next bytecode in the bytecode array. Code offset
is set to one less than the bail out id. This would point to the end of the
current instruction. Since we use it only for summarizing the frame and to
compute the source position, it should be safe to set it to the end of current
instruction.
BUG=v8:4280, v8:4689
LOG=N
Review URL: https://codereview.chromium.org/1763783003
Cr-Commit-Position: refs/heads/master@{#34580}
