Instead, make it possible for indifidual tests to pass "always true flags" which
are not part of the varying flag set.
The downside is that if an experimental flag changes parsing of some of the
unrelated code snippets, it's noticed later (only after the flag is turned on by
default). But this is a reasonable trade off for faster tests.
Additional fix: Some tests (ErrorsFutureStrictReservedWords) were using
always_flags incorrectly (running two different tests with different
always_flags basically iterates over every flag combination anyway - most of
them twice).
BUG=v8:3707
LOG=N
Review URL: https://codereview.chromium.org/772823002
Cr-Commit-Position: refs/heads/master@{#25628}
Most of the run time came from testing with all possible flag combinations. None
of the flags passed affect the test, and there are specialized tests for testing
the features behind the flags; no need to slow down the generic test.
With these changes, run time for debug build goes from 186 s to 0.5 s.
In addition, fixed some missing commas between the test cases.
R=svenpanne@chromium.org
BUG=v8:3707
LOG=N
Review URL: https://codereview.chromium.org/766673003
Cr-Commit-Position: refs/heads/master@{#25612}
Running this in x64.release mode on a powerful HP620 takes 4 seconds,
this is at least 2 orders of magnitude too slow and leads to tons of
false positives on our build bots due to timeouts. As it is, the
cost-benefit ratio is far too low.
The whole approach needs to be changed: Instead of trying to exhaust
some search space in unit tests, this should be turned into a fuzzing
test where only a small but random number of things are tested. The
exhaustive approach can be done separately, but definitely not in the
unit tests.
BUG=v8:3707
Review URL: https://codereview.chromium.org/762743002
Cr-Commit-Position: refs/heads/master@{#25510}
Since checking all possible combinations is taking so long this
reduces the test to test the odd cases (let, yield and static) as
well as a single ordinary case.
BUG=v8:3707
LOG=n
Review URL: https://codereview.chromium.org/724713004
Cr-Commit-Position: refs/heads/master@{#25428}
The spec explicitly forbids them. V8 never handled them properly either, just
the Scanner accepted them (it had code to add them literally to the
LiteralBuffer) and later on, Regexp constructor disallowed them.
According to the spec, unicode escapes in regexp flags should be an early error
("It is a Syntax Error if IdentifierPart contains a Unicode escape sequence.").
Note that Scanner is still more relaxed about regexp flags than the
spec. Especially, it accepts any identifier parts (not just a small set of
letters) and doesn't check for duplicates.
R=rossberg@chromium.org
Review URL: https://codereview.chromium.org/700373003
Cr-Commit-Position: refs/heads/master@{#25215}
git-svn-id: https://v8.googlecode.com/svn/branches/bleeding_edge@25215 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This simplifies escape handling and makes it easier to extend escapes for ES6.
PushBack just before detecting ILLEGAL is unnecessary, since we will abort the
scanning / parsing anyway at that point, and it doesn't matter where the cursor
exactly is. The error messages w/ PushBack are not any better or more correct
than without.
In addition: remove a comment about handling invalid escapes gracefully when we
no longer do. (*)
This CL includes a behavioral change: For input "var r = /foobar/g\urrrr;" we
used to report "unexpected_token: ILLEGAL" for "\u", but now we report
malformed_regexp_flags which is a more correct error message. (Note that the
code for reporting invalid_regexp_flags was dead, and invalid_regexp_flags is
not the right error message.)
Note that the V8 is more relaxed about unicode escapes in regexp flags than ES6
(see
http://people.mozilla.org/~jorendorff/es6-draft.html#sec-regular-expressions )
and this CL doesn't change it. (V8 accepts any \uxxxx, ES6 spec says only a
certain value range is acceptable.)
(*) Code archaeology:
Originally, doing PushBack in ScanHexEscape made sense (see e.g., here
https://codereview.chromium.org/5063003/diff/6001/src/prescanner.h ), since we
wouldn't return ILLEGAL but treat an invalid escape sequence "\uxxxx" as
"uxxxx".
(The repo at that point contains another instance of the same function, from the
initial commit. The logic is the same.)
This behavior was changed in a "renaming" commit
https://codereview.chromium.org/7739020.
BUG=
R=rossberg@chromium.org
Review URL: https://codereview.chromium.org/684873002
Cr-Commit-Position: refs/heads/master@{#25031}
git-svn-id: https://v8.googlecode.com/svn/branches/bleeding_edge@25031 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
ES6 no longer makes duplicate properties an error. However, we
continue to treat duplicate properties in strict mode object
literals as errors. With this change we allow duplicate properties
in class bodies. We continue to flag duplicate constructors as an
error as required by ES6.
BUG=v8:3570
LOG=Y
R=marja@chromium.org
Review URL: https://codereview.chromium.org/677953004
Cr-Commit-Position: refs/heads/master@{#24933}
git-svn-id: https://v8.googlecode.com/svn/branches/bleeding_edge@24933 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This adds flags in Scope to track wheter a Scope uses "this" and,
"arguments". The information is exposed via Scope::uses_this(),
and Scope::uses_arguments(), respectively. Flags for tracking
usage on any inner scope uses are available as well via
Scope::inner_uses_this(), and Scope::inner_uses_arguments().
Knowing whether scopes use "this" and "arguments" will be handy
to generate the code needed to capture their values when generating
the code for arrow functions.
BUG=v8:2700
LOG=
R=rossberg@chromium.org
Review URL: https://codereview.chromium.org/422923004
Patch from Adrian Perez de Castro <aperez@igalia.com>.
git-svn-id: https://v8.googlecode.com/svn/branches/bleeding_edge@24663 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
- Background Parsers cannot get the following data from Isolate (pass it to the
ctor instead): stack limit (background Parsers need a different stack limit),
UnicodeCache (background parsers need a separate UnicodeCache), hash seed
(Parser cannot access the Heap to get it). The Parser::Parse API won't change.
- Make the internalization phase (where Parser interacts with the heap) more
explicit. Previously, Parser was interacting with the heap here and there.
- Move HandleSourceURLComments out of DoParseProgram, so that background parsing
can use DoParseProgram too.
BUG=
R=rossberg@chromium.org
Review URL: https://codereview.chromium.org/527763002
git-svn-id: https://v8.googlecode.com/svn/branches/bleeding_edge@23600 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
(parser or code) and to be explicit about cache consumption or production
(rather than making presence of cached_data imply one or the other.)
Also add a --cache flag to d8, to allow testing the functionality.
-----------------------------
API change
Reason: Currently, V8 supports a 'parser cache' for repeatedly executing the same script. We'd like to add a 2nd mode that would cache code, and would like to let the embedder decide which mode they chose (if any).
Note: Previously, the 'use cached data' property was implied by the presence of the cached data itself. (That is, kNoCompileOptions and source->cached_data != NULL.) That is no longer sufficient, since the presence of data is no longer sufficient to determine /which kind/ of data is present.
Changes from old behaviour:
- If you previously didn't use caching, nothing changes.
Example:
v8::CompileUnbound(isolate, source, kNoCompileOptions);
- If you previously used caching, it worked like this:
- 1st run:
v8::CompileUnbound(isolate, source, kProduceToCache);
Then, source->cached_data would contain the
data-to-be cached. This remains the same, except you
need to tell V8 which type of data you want.
v8::CompileUnbound(isolate, source, kProduceParserCache);
- 2nd run:
v8::CompileUnbound(isolate, source, kNoCompileOptions);
with source->cached_data set to the data you received in
the first run. This will now ignore the cached data, and
you need to explicitly tell V8 to use it:
v8::CompileUnbound(isolate, source, kConsumeParserCache);
-----------------------------
BUG=
R=marja@chromium.org, yangguo@chromium.org
Review URL: https://codereview.chromium.org/389573006
git-svn-id: https://v8.googlecode.com/svn/branches/bleeding_edge@22431 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
There are a lot of tests in cctest/test-parsing/ErrorsArrowFunctions,
so it is quite slow. This patch removes some flags to make it faster.
Removing three flags that don't affect the test brings down the run
time one order of magnitude, which is fast enough even for debug/ASAN
bots.
Also, remove the unneeded kArrowFunctions flag from
cctest/test-parsing/NoErrorsYieldSloppyAllModes
BUG=
R=marja@chromium.org
Review URL: https://codereview.chromium.org/387383002
Patch from Adrián Pérez de Castro <aperez@igalia.com>.
git-svn-id: https://v8.googlecode.com/svn/branches/bleeding_edge@22392 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Arrow functions are parsed from ParseAssignmentExpression(). Handling the
parameter list is done by letting ParseConditionalExpression() parse a comma
separated list of identifiers, and it returns a tree of BinaryOperation nodes
with VariableProxy leaves, or a single VariableProxy if there is only one
parameter. When the arrow token "=>" is found, the VariableProxy nodes are
passed to ParseArrowFunctionLiteral(), which will then skip parsing the
paramaeter list. This avoids having to rewind when the arrow is found and
restart parsing the parameter list.
Note that the empty parameter list "()" is handled directly in
ParsePrimaryExpression(): after is has consumed the opening parenthesis,
if a closing parenthesis follows, then the only valid input is an arrow
function. In this case, ParsePrimaryExpression() directly calls
ParseArrowFunctionLiteral(), to avoid needing to return a sentinel value
to signal the empty parameter list. Because it will consume the body of
the arrow function, ParseAssignmentExpression() will not see the arrow
"=>" token as next, and return the already-parser expression.
The implementation is done in ParserBase, so it was needed to do some
additions to ParserBase, ParserTraits and PreParserTraits. Some of the
glue code can be removed later on when more more functionality is moved
to ParserBase.
Additionally, this adds a runtime flag "harmony_arrow_functions"
(disabled by default); enabling "harmony" will enable it as well.
BUG=v8:2700
LOG=N
R=marja@chromium.org
Review URL: https://codereview.chromium.org/383983002
Patch from Adrián Pérez de Castro <aperez@igalia.com>.
git-svn-id: https://v8.googlecode.com/svn/branches/bleeding_edge@22366 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
