The original was reverted for breaking webkit layout tests:
https://ci.chromium.org/p/v8/builders/luci.v8.ci/V8-Blink%20Linux%2064/30270
It also caused the following clusterfuzz failures:
chromium:935832
This was a correctness bug due to not properly handling the case of arrays with prototypes other
than Array.prototype. Accesses that were TheHole were not being handled property, both in bounds
holes in holey arrays and out of bounds on either holey or packed arrays. Handling was incorrect
both in access-assembler and in Turbofan.
chromium:935932
This bug was that there was no handling for Has checks on the global object. Turbofan was emitting
code for a store (the 'else' condition on 'access_mode == AccessMode::kLoad'). It hit a DCHECK in
debug builds but in release could show up in different places. This is the bug that caused the
webkit layout test failure that led to the revert.
Both bugs are fixed by in CL, and tests are added for those cases.
Bug: v8:8733, chromium:935932, chromium:935832
Change-Id: Iba0dfcfce6e15d2c0815a7670ece67bc13ba1925
Reviewed-on: https://chromium-review.googlesource.com/c/1493132
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Matt Gardner <magardn@microsoft.com>
Cr-Commit-Position: refs/heads/master@{#59958}
This is a reland of 35269f77f8
Switches on an expression that unconditionally throws would have all their
case statements dead, causing a DCHECK error in the SwitchBuilder. This
fixes up the DCHECK to allow dead labels.
Original change's description:
> [ignition] Skip binding dead labels
>
> BytecodeLabels for forward jumps may create a dead basic block if their
> corresponding jump was elided (due to it dead code elimination). We can
> avoid generating such dead basic blocks by skipping the label bind when
> no corresponding jump has been observed. This works because all jumps
> except JumpLoop are forward jumps, so we only have to special case one
> Bind for loop headers to bind unconditionally.
>
> Since Binds are now conditional on a jump existing, we can no longer rely
> on using Bind to get the current offset (e.g. at the beginning of a try
> block). Instead, we now expose the current offset in the bytecode array
> writer. Conveniently, this means that we can be a bit smarter about basic
> blocks around these statements.
>
> As a drive-by, remove the unused Bind(target,label) function.
>
> Bug: chromium:934166
> Change-Id: I532aa452fb083560d07b90da99caca0b1d082aa3
> Reviewed-on: https://chromium-review.googlesource.com/c/1488763
> Commit-Queue: Leszek Swirski <leszeks@chromium.org>
> Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#59942}
TBR=rmcilroy@chromium.org
Bug: chromium:934166
Change-Id: If6eab4162106717ce64a2dc477000c6a76354cb4
Reviewed-on: https://chromium-review.googlesource.com/c/1494535
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59948}
This reverts commit 35269f77f8.
Reason for revert: Fuzzer unhappy: https://ci.chromium.org/p/v8/builders/ci/V8%20Fuzzer/29792
Original change's description:
> [ignition] Skip binding dead labels
>
> BytecodeLabels for forward jumps may create a dead basic block if their
> corresponding jump was elided (due to it dead code elimination). We can
> avoid generating such dead basic blocks by skipping the label bind when
> no corresponding jump has been observed. This works because all jumps
> except JumpLoop are forward jumps, so we only have to special case one
> Bind for loop headers to bind unconditionally.
>
> Since Binds are now conditional on a jump existing, we can no longer rely
> on using Bind to get the current offset (e.g. at the beginning of a try
> block). Instead, we now expose the current offset in the bytecode array
> writer. Conveniently, this means that we can be a bit smarter about basic
> blocks around these statements.
>
> As a drive-by, remove the unused Bind(target,label) function.
>
> Bug: chromium:934166
> Change-Id: I532aa452fb083560d07b90da99caca0b1d082aa3
> Reviewed-on: https://chromium-review.googlesource.com/c/1488763
> Commit-Queue: Leszek Swirski <leszeks@chromium.org>
> Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#59942}
TBR=rmcilroy@chromium.org,leszeks@chromium.org
Change-Id: I8118e54e0afa5e08b0a0a874c952f8a01f1c3242
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:934166
Reviewed-on: https://chromium-review.googlesource.com/c/1494534
Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
Commit-Queue: Sigurd Schneider <sigurds@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59947}
BytecodeLabels for forward jumps may create a dead basic block if their
corresponding jump was elided (due to it dead code elimination). We can
avoid generating such dead basic blocks by skipping the label bind when
no corresponding jump has been observed. This works because all jumps
except JumpLoop are forward jumps, so we only have to special case one
Bind for loop headers to bind unconditionally.
Since Binds are now conditional on a jump existing, we can no longer rely
on using Bind to get the current offset (e.g. at the beginning of a try
block). Instead, we now expose the current offset in the bytecode array
writer. Conveniently, this means that we can be a bit smarter about basic
blocks around these statements.
As a drive-by, remove the unused Bind(target,label) function.
Bug: chromium:934166
Change-Id: I532aa452fb083560d07b90da99caca0b1d082aa3
Reviewed-on: https://chromium-review.googlesource.com/c/1488763
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59942}
This reverts commit 32fc0acfef.
Reason for revert:
https://ci.chromium.org/p/v8/builders/luci.v8.ci/V8-Blink%20Linux%2064/30270
layout test breakage:
https://test-results.appspot.com/data/layout_results/V8-Blink_Linux_64/30270/webkit_layout_tests%20%28with%20patch%29/layout-test-results/results.html
There is a dead node arriving in representation selection, which might indicate that the problem is not in this CL, but that this CL stirs up the node soup in such a way that dead code elimination gets confused.
Original change's description:
> Optimize `in` operator
>
> This change implements optimizations for the `in` operator for packed array
> elements and object properties. It adds a new feedback slot kind and an IC
> path similar to KeyedLoadIC for handling the lookups. TurboFan uses the
> feedback to optimize based on the maps and keys.
>
> For more details see:
> https://docs.google.com/document/d/1tIfzywY8AeNVcy_sen-5Xev21MeZwjcU8QhSdzHvXig
>
> This can provide 10x performance improvements of on loops of the form:
>
> for (let i = 0; i < ary.length; ++i) {
> if (i in ary) {
> ...
> }
> }
>
>
> Bug: v8:8733
> Change-Id: I766bf865a547a059e5bce5399bb6112e5d9a85c8
> Reviewed-on: https://chromium-review.googlesource.com/c/1432598
> Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
> Reviewed-by: Igor Sheludko <ishell@chromium.org>
> Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
> Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
> Reviewed-by: Toon Verwaest <verwaest@chromium.org>
> Commit-Queue: Matt Gardner <magardn@microsoft.com>
> Cr-Commit-Position: refs/heads/master@{#59843}
TBR=ulan@chromium.org,rmcilroy@chromium.org,jkummerow@chromium.org,jarin@chromium.org,ishell@chromium.org,bmeurer@chromium.org,verwaest@chromium.org,magardn@microsoft.com
Change-Id: Ib2db974e5bed4c4a2b6b450f796bdc4b0b8fd562
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:8733
Reviewed-on: https://chromium-review.googlesource.com/c/1488761
Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
Commit-Queue: Sigurd Schneider <sigurds@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59857}
This change implements optimizations for the `in` operator for packed array
elements and object properties. It adds a new feedback slot kind and an IC
path similar to KeyedLoadIC for handling the lookups. TurboFan uses the
feedback to optimize based on the maps and keys.
For more details see:
https://docs.google.com/document/d/1tIfzywY8AeNVcy_sen-5Xev21MeZwjcU8QhSdzHvXig
This can provide 10x performance improvements of on loops of the form:
for (let i = 0; i < ary.length; ++i) {
if (i in ary) {
...
}
}
Bug: v8:8733
Change-Id: I766bf865a547a059e5bce5399bb6112e5d9a85c8
Reviewed-on: https://chromium-review.googlesource.com/c/1432598
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Matt Gardner <magardn@microsoft.com>
Cr-Commit-Position: refs/heads/master@{#59843}
This takes heap-inl.h out of the "Giant Include Cluster".
Naturally, that means adding a bunch of explicit includes
in a bunch of places that relied on transitively including
them before.
As of this patch, no header file outside src/heap/ includes
heap-inl.h.
Bug: v8:8562,v8:8499
Change-Id: I65fa763f90e66afc30d105b9277792721f05a6d4
Reviewed-on: https://chromium-review.googlesource.com/c/1459659
Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59617}
As opposed to the register.
For subtle reasons, this fixes a deoptimizer bug with handling return
values in lazy deopt. Since the return values can now only overwrite
the accumulator, there is no danger of overwriting a captured object
that might be later used (since there is no "later").
Bug: chromium:902608
Change-Id: I3a7a10bb1c7a6f4303a01d60f80680afcb7bc942
Reviewed-on: https://chromium-review.googlesource.com/c/1325901
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#57349}
This is a reland of eccf186749
Original change's description:
> [interpreter] Separate bytecodes for one-shot property loads and stores
>
> Create LdaNamedPropertyNoFeedback and StaNamedPropertyNoFeedback
> for one-shot property loads and stores. This CL replaces the runtime
> calls with new bytecodes for named property load stores in one-shot code.
> the runtime calls needed extra set of consecutive registers and
> additional move instructions. This increased the size of
> bytecode-array and possibly extended the life time of objects.
> By replacing them with NoFeedback bytecodes we avoid these issues.
>
> Bug: v8:8072
> Change-Id: I20a38a5ce9940026171d870d354787fe0b7c5a6f
> Reviewed-on: https://chromium-review.googlesource.com/1196725
> Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
> Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Reviewed-by: Georg Neis <neis@chromium.org>
> Commit-Queue: Chandan Reddy <chandanreddy@google.com>
> Cr-Commit-Position: refs/heads/master@{#56211}
Bug: v8:8072
Change-Id: Ie8e52b37daf35c7bc08bb910d7b15a9b783354e4
Reviewed-on: https://chromium-review.googlesource.com/1245742
Commit-Queue: Chandan Reddy <chandanreddy@google.com>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56266}
This reverts commit eccf186749.
Reason for revert: Speculative revert because it seems to introduce a pretty stable flake on gc stress tests, see https://bugs.chromium.org/p/v8/issues/detail?id=8229
Original change's description:
> [interpreter] Separate bytecodes for one-shot property loads and stores
>
> Create LdaNamedPropertyNoFeedback and StaNamedPropertyNoFeedback
> for one-shot property loads and stores. This CL replaces the runtime
> calls with new bytecodes for named property load stores in one-shot code.
> the runtime calls needed extra set of consecutive registers and
> additional move instructions. This increased the size of
> bytecode-array and possibly extended the life time of objects.
> By replacing them with NoFeedback bytecodes we avoid these issues.
>
> Bug: v8:8072
> Change-Id: I20a38a5ce9940026171d870d354787fe0b7c5a6f
> Reviewed-on: https://chromium-review.googlesource.com/1196725
> Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
> Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Reviewed-by: Georg Neis <neis@chromium.org>
> Commit-Queue: Chandan Reddy <chandanreddy@google.com>
> Cr-Commit-Position: refs/heads/master@{#56211}
TBR=rmcilroy@chromium.org,yangguo@chromium.org,jarin@chromium.org,neis@chromium.org,cbruni@chromium.org,chandanreddy@google.com
Change-Id: I445db58e6d4c275b434fabad5fad775bf259033f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:8072
Reviewed-on: https://chromium-review.googlesource.com/1245421
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Commit-Queue: Maya Lekova <mslekova@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56232}
Create LdaNamedPropertyNoFeedback and StaNamedPropertyNoFeedback
for one-shot property loads and stores. This CL replaces the runtime
calls with new bytecodes for named property load stores in one-shot code.
the runtime calls needed extra set of consecutive registers and
additional move instructions. This increased the size of
bytecode-array and possibly extended the life time of objects.
By replacing them with NoFeedback bytecodes we avoid these issues.
Bug: v8:8072
Change-Id: I20a38a5ce9940026171d870d354787fe0b7c5a6f
Reviewed-on: https://chromium-review.googlesource.com/1196725
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Chandan Reddy <chandanreddy@google.com>
Cr-Commit-Position: refs/heads/master@{#56211}
We do not have to collect feedback for function calls in one-shot code.
This CL avoids allocating CallICslots for each function call by
emitting CallNoFeedback bytecodes. We save one CallICSlot (two entries
in feedback vector) per function call in One-shot.
Bug: v8:8072
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Ic2580e5972acd5124c2e71d540985736ce797fe8
Reviewed-on: https://chromium-review.googlesource.com/1178051
Commit-Queue: Chandan Reddy <chandanreddy@google.com>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#55951}
This is a reland of 1c48d52bb1.
It turned out that IterableToList doesn't always behave according to
the ES operation with the same name. Specifically, it allows holey arrays
to take its fast path, which produces an output array with holes where
actually "undefined" elements should appear.
This CL changes the version of IterableToList that is used for spreads
(IterableToListWithSymbolLookup) such that holey arrays take the slow path.
It also includes tests for such situations.
Original change's description:
> [interpreter] Add bytecode for leading array spreads.
>
> This CL improves the performance of creating [...a, b] or [...a].
> If the array literal has a leading spread, this CL emits the bytecode
> [CreateArrayFromIterable] to create the literal. CreateArrayFromIterable
> is implemented by [IterableToListDefault] builtin to create the initial
> array for the leading spread. IterableToListDefault has a fast path to
> clone efficiently if the spread is an actual array.
>
> The bytecode generated is now shorter. Bytecode generation is refactored
> into to BuildCreateArrayLiteral, which allows VisitCallSuper to benefit
> from this optimization also.
> For now, turbofan also lowers the bytecode to the builtin.
>
> The idiomatic use of [...a] to clone the array a now performs better
> than a simple for-loop, but still does not match the performance of slice.
>
> Bug: v8:7980
>
> Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
> Change-Id: Ibde659c82d3c7aa1b1777a3d2f6426ac8cc15e35
> Reviewed-on: https://chromium-review.googlesource.com/1181024
> Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
> Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Reviewed-by: Georg Neis <neis@chromium.org>
> Commit-Queue: Georg Neis <neis@chromium.org>
> Commit-Queue: Hai Dang <dhai@google.com>
> Cr-Commit-Position: refs/heads/master@{#55520}
Bug: v8:7980
Change-Id: I0b5603a12d2b588327658bf0a9b214bd0f22e237
Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
Reviewed-on: https://chromium-review.googlesource.com/1201882
Commit-Queue: Hai Dang <dhai@google.com>
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#55639}
This reverts commit 1c48d52bb1.
Reason for revert: Clusterfuzz found something.
Original change's description:
> [interpreter] Add bytecode for leading array spreads.
>
> This CL improves the performance of creating [...a, b] or [...a].
> If the array literal has a leading spread, this CL emits the bytecode
> [CreateArrayFromIterable] to create the literal. CreateArrayFromIterable
> is implemented by [IterableToListDefault] builtin to create the initial
> array for the leading spread. IterableToListDefault has a fast path to
> clone efficiently if the spread is an actual array.
>
> The bytecode generated is now shorter. Bytecode generation is refactored
> into to BuildCreateArrayLiteral, which allows VisitCallSuper to benefit
> from this optimization also.
> For now, turbofan also lowers the bytecode to the builtin.
>
> The idiomatic use of [...a] to clone the array a now performs better
> than a simple for-loop, but still does not match the performance of slice.
>
> Bug: v8:7980
>
> Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
> Change-Id: Ibde659c82d3c7aa1b1777a3d2f6426ac8cc15e35
> Reviewed-on: https://chromium-review.googlesource.com/1181024
> Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
> Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Reviewed-by: Georg Neis <neis@chromium.org>
> Commit-Queue: Georg Neis <neis@chromium.org>
> Commit-Queue: Hai Dang <dhai@google.com>
> Cr-Commit-Position: refs/heads/master@{#55520}
TBR=rmcilroy@chromium.org,neis@chromium.org,sigurds@chromium.org,gsathya@chromium.org,jgruber@chromium.org,dhai@google.com
Change-Id: I1c86ddcc24274da9f5a8dd3d8bf8d869cbb55cb6
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:7980
Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
Reviewed-on: https://chromium-review.googlesource.com/1199303
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#55544}
This CL improves the performance of creating [...a, b] or [...a].
If the array literal has a leading spread, this CL emits the bytecode
[CreateArrayFromIterable] to create the literal. CreateArrayFromIterable
is implemented by [IterableToListDefault] builtin to create the initial
array for the leading spread. IterableToListDefault has a fast path to
clone efficiently if the spread is an actual array.
The bytecode generated is now shorter. Bytecode generation is refactored
into to BuildCreateArrayLiteral, which allows VisitCallSuper to benefit
from this optimization also.
For now, turbofan also lowers the bytecode to the builtin.
The idiomatic use of [...a] to clone the array a now performs better
than a simple for-loop, but still does not match the performance of slice.
Bug: v8:7980
Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
Change-Id: Ibde659c82d3c7aa1b1777a3d2f6426ac8cc15e35
Reviewed-on: https://chromium-review.googlesource.com/1181024
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Georg Neis <neis@chromium.org>
Commit-Queue: Hai Dang <dhai@google.com>
Cr-Commit-Position: refs/heads/master@{#55520}
As discussed in
https://docs.google.com/document/d/1sBdGe8RHgeYP850cKSSgGABTyfMdvaEWLy-vertuTCo/edit?ts=5b3ba5cc#,
this CL introduces a new bytecode (CloneObject), and a new IC type.
In this prototype implementation, the type feedback looks like the
following:
Uninitialized case:
{ uninitialized_sentinel, uninitialized_sentinel }
Monomorphic case:
{ weak 'source' map, strong 'result' map }
Polymorphic case:
{ WeakFixedArray with { weak 'source' map, strong 'result' map }, cleared value }
Megamorphic case:
{ megamorphic_sentinel, cleared_Value }
In the fast case, Object cloning is done by allocating an object with
the saved result map, and a shallow clone of the fast properties from
the source object, as well as cloned fast elements from the source object.
If at any point the fast case can't be taken, the IC transitions to the
slow case and remains there.
This prototype CL does not include any TurboFan optimization, and the
CloneObject operation is merely reduced to a stub call.
It may still be possible to get some further improvements by somehow
incorporating compile-time boilerplate elements into the cloned object,
or simplifying how the boilerplate elements are inserted into the
object.
In terms of performance, we improve the ObjectSpread score in JSTests/ObjectLiteralSpread/
by about 8x, with substantial improvements over the Babel and ObjectAssign scores.
R=gsathya@chromium.org, mvstanton@chromium.org, rmcilroy@chromium.org, neis@chromium.org, bmeurer@chromium.org
BUG=v8:7611
Change-Id: I79e1796eb77016fb4feba0e1d3bb9abb348c183e
Reviewed-on: https://chromium-review.googlesource.com/1127472
Commit-Queue: Caitlin Potter <caitp@igalia.com>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Stanton <mvstanton@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#54595}
Return the raw Object* when accessing the constant pool of bytecode
with the bytecode array accessor, to avoid needing an isolate there.
If the returned value needs to be a handle, we create the handle
later.
Bug: v8:7786
Change-Id: Ifeac2a06f0383230bf7e9bfc1b751d9750ecfb51
Reviewed-on: https://chromium-review.googlesource.com/1102334
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53784}
Instead rely on the scope info containing the name as well.
Change-Id: Ie1f96ea023a793b11209510566f6831b1dfd40ab
Reviewed-on: https://chromium-review.googlesource.com/1042567
Commit-Queue: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52983}
There are likely cleanups that can be done after this CL:
- context-related functions in the interpreter and compiler take ScopeInfo as
well as ScopeType and slot-count as input. The latter 2 should be directly
derived from the former. We should be able to drop FunctionContextParameters.
- ContextExtension is probably not needed anymore, since we now always have the
correct scope_info directly in the SCOPE_INFO_INDEX slot.
Bug: v8:7066
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Ie1f6134c686a9f2183e54730d9cdd598a9e5ab67
Reviewed-on: https://chromium-review.googlesource.com/785151
Commit-Queue: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Hannes Payer <hpayer@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52952}
This reverts commit 2df5e7a7b6.
Reason for revert: Mystery crashes https://bugs.chromium.org/p/chromium/issues/detail?id=838805
Original change's description:
> [parser] Slice the source string where possible
>
> When internalizing string literals (for quoted strings or property names),
> try to create a sliced string of the source string rather than allocating
> a copy of the bytes.
>
> This will not work for string literals that contain escapes (e.g. unicode
> escapes), and currently does not support two-byte strings.
>
> Bug: chromium:818642
> Change-Id: I686e5ad36baecd1a84ce5e124118431249b6c980
> Reviewed-on: https://chromium-review.googlesource.com/1010282
> Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
> Reviewed-by: Marja Hölttä <marja@chromium.org>
> Commit-Queue: Leszek Swirski <leszeks@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#52898}
TBR=marja@chromium.org,yangguo@chromium.org,jarin@chromium.org,mlippautz@chromium.org,leszeks@chromium.org,verwaest@chromium.org
Change-Id: I598b6668c43a3e843e2dd8e60852b2b2f3461954
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:818642
Reviewed-on: https://chromium-review.googlesource.com/1039885
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52919}
When internalizing string literals (for quoted strings or property names),
try to create a sliced string of the source string rather than allocating
a copy of the bytes.
This will not work for string literals that contain escapes (e.g. unicode
escapes), and currently does not support two-byte strings.
Bug: chromium:818642
Change-Id: I686e5ad36baecd1a84ce5e124118431249b6c980
Reviewed-on: https://chromium-review.googlesource.com/1010282
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52898}
Several functions on Array.prototype incorrectly threw a TypeError just
because their receiver was sealed or frozen.
Bug: v8:7677
Change-Id: I4ec38bfbf468f9bd676f1c0b341c8a50cf814f15
Reviewed-on: https://chromium-review.googlesource.com/1021870
Commit-Queue: Georg Neis <neis@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52718}
There are various situations where we explicitly compare a SMI against
another SMI (e.g., BuildIndexedJump). This is also a common pattern for
generated code (e.g., comparing a loop variable with an integer). Instead
of using the generic equality/strict-equality stub for this, which is
expensive, this CL offers a simple comparison stub, repurposing the
TestEqualStrictNoFeedback bytecode to TestReferenceEqual
Bug: v8:5310
Change-Id: Ib2b47cd24d5386cf0d20d3bd794776dc6e3a02a5
Reviewed-on: https://chromium-review.googlesource.com/1007542
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Christian O. Andersson <cricke@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52655}
- Add a new bytecode for the ToString operation, replacing the old
intrinsic call (currently does not collect type feedback).
- Add a new AST node to represent TemplateLiterals, and avoid
generating unnecessary ToString operations in some simple cases.
- Use a single feedback slot for each string addition, because the
type feedback should always be the same for each addition
This seems to produce a very slight improvement on JSTests benchmarks
and bench-ruben.js from v8:7415, and it's possible that type feedback
for the ToString bytecode could provide more opportunities to eliminate
the runtime call in TurboFan.
Doesn't touch tagged templates
[esnext] fix OOB read in ASTPrinter::VisistTemplateLiteral
Fixes an error where TemplateLiteral printing in --print-ast
would try to read an element beyond the length of a vector.
BUG=v8:7415, chromium:820596
R=adamk@chromium.org, gsathya@chromum.org, rmcilroy@chromium.org, ishell@chromium.org, bmeurer@chromium.org
Change-Id: Ie56894f73a6445550a5f95f42160c4e29ab1da42
Reviewed-on: https://chromium-review.googlesource.com/958408
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Caitlin Potter <caitp@igalia.com>
Cr-Commit-Position: refs/heads/master@{#51933}
This reverts commit 8ae19e08b1.
Reason for revert:
Speculative revert for layout test:
https://build.chromium.org/p/client.v8.fyi/builders/V8-Blink%20Linux%2064/builds/22215
See:
https://github.com/v8/v8/wiki/Blink-layout-tests
Original change's description:
> [esnext] re-implement template strings
>
> - Add a new bytecode for the ToString operation, replacing the old
> intrinsic call (currently does not collect type feedback).
> - Add a new AST node to represent TemplateLiterals, and avoid
> generating unnecessary ToString operations in some simple cases.
> - Use a single feedback slot for each string addition, because the
> type feedback should always be the same for each addition
>
> This seems to produce a very slight improvement on JSTests benchmarks
> and bench-ruben.js from v8:7415, and it's possible that type feedback
> for the ToString bytecode could provide more opportunities to eliminate
> the runtime call in TurboFan.
>
> Doesn't touch tagged templates
>
> BUG=v8:7415
> R=rmcilroy@chromium.org, ishell@chromium.org, bmeurer@chromium.org
>
> Change-Id: If5a8c68558431f058db894d65776324abf54218e
> Reviewed-on: https://chromium-review.googlesource.com/945408
> Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
> Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
> Commit-Queue: Caitlin Potter <caitp@igalia.com>
> Cr-Commit-Position: refs/heads/master@{#51853}
TBR=rmcilroy@chromium.org,caitp@igalia.com,ishell@chromium.org,bmeurer@chromium.org
Change-Id: Id0529b065493ffc20c8f2b1abacc4c1484c3c046
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:7415
Reviewed-on: https://chromium-review.googlesource.com/958163
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#51862}
- Add a new bytecode for the ToString operation, replacing the old
intrinsic call (currently does not collect type feedback).
- Add a new AST node to represent TemplateLiterals, and avoid
generating unnecessary ToString operations in some simple cases.
- Use a single feedback slot for each string addition, because the
type feedback should always be the same for each addition
This seems to produce a very slight improvement on JSTests benchmarks
and bench-ruben.js from v8:7415, and it's possible that type feedback
for the ToString bytecode could provide more opportunities to eliminate
the runtime call in TurboFan.
Doesn't touch tagged templates
BUG=v8:7415
R=rmcilroy@chromium.org, ishell@chromium.org, bmeurer@chromium.org
Change-Id: If5a8c68558431f058db894d65776324abf54218e
Reviewed-on: https://chromium-review.googlesource.com/945408
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Caitlin Potter <caitp@igalia.com>
Cr-Commit-Position: refs/heads/master@{#51853}
... and use it in the implementation of array literal spreads,
replacing calls to %AppendElement.
Array spreads in destructuring will be taken care of in a separate CL.
Bug: v8:5940, v8:7446
Change-Id: Idec52398902a7fd3c1244852cf73246f142404f0
Reviewed-on: https://chromium-review.googlesource.com/915364
Commit-Queue: Georg Neis <neis@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Mythri Alle <mythria@chromium.org>
Cr-Commit-Position: refs/heads/master@{#51709}
Implements the change outlined in https://github.com/tc39/ecma262/pull/890,
which has been ratified and pulled into the specification. In particular,
template callsite objects are no longer kept in a global, eternal Map, but
are instead associated with their callsite, which can be collected. This
prevents a memory leak incurred by TaggedTemplate calls.
Changes, summarized:
- Remove the TemplateMap and TemplateMapShape objects, instead caching
template objects in the feedback vector.
- Remove the `hash` member of TemplateObjectDescriptor, and the Equals
method (used by TemplateMap)
- Add a new FeedbackSlotKind (kTemplateObject), which behaves similarly
to FeedbackSlotKind::kLiteral, but prevents eval caching. This ensures
that a new feedback vector is always created for eval() containing tagged
templates, even when the CompilationCache is used.
- GetTemplateObject bytecode now takes a feedback index, and only calls
into the runtime if the feedback is Smi::kZero (uninitialized).
BUG=v8:3230, v8:2891
R=littledan@chromium.org, yangguo@chromium.org, bmeurer@chromium.org,
rmcilroy@chromium.org
Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
Change-Id: I7827bc148d3d93e2b056ebf63dd624da196ad423
Reviewed-on: https://chromium-review.googlesource.com/624564
Commit-Queue: Caitlin Potter <caitp@igalia.com>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#51248}
Currently, yields and awaits inside loops compile to bytecode which
switches to the top of the loop header, and switch again once inside the
loop. This is to make loops reducible.
This replaces this switching logic with a single switch bytecode that
directly jumps to the bytecode being resumed. Among other things, this
allows us to no longer maintain the generator state after the switch at
the top of the function, and avoid having to track loop suspend counts.
TurboFan still needs to have reducible loops, so we now insert loop
header switches during bytecode graph building, for suspends that are
discovered to be inside loops during bytecode analysis. We do, however,
do some environment magic across loop headers since we know that we will
continue switching if and only if we reached that loop header via a
generator resume. This allows us to generate fewer phis and tighten
liveness.
Change-Id: Id2720ce1d6955be9a48178322cc209b3a4b8d385
Reviewed-on: https://chromium-review.googlesource.com/866734
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50804}
Instead of requiring the pattern that a SuspendGenerator must be
followed by a Return, make SuspendGenerator return directly. This can,
in the future, simplify some of the reasoning around generator suspends.
Change-Id: I94c0156a89dc0e1c0bc306bc57acf766f3b4deb5
Reviewed-on: https://chromium-review.googlesource.com/857463
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50748}
This makes RestoreGeneratorRegisters do a fuller resume process: update
the state register to indicate that it is now executing, and update the
accumulator with the input_or_debug_pos of the generator - i.e., perform
the boilerplate generator resuming in one bytecode instead of several.
Change-Id: Ia87b6766ac023064b40d3e9a143e7b32118ea3a0
Reviewed-on: https://chromium-review.googlesource.com/859770
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50499}
This patch breaks out bailout reasons into two enum classes.
This helps save 3 bits on the SharedFunctionInfo as we don't have to
track the abort reasons.
Change-Id: Ic2e7e7e32b0fa31491f1c6f0003a61390d68fd97
Reviewed-on: https://chromium-review.googlesource.com/848244
Reviewed-by: Ben Titzer <titzer@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Sathya Gunasekaran <gsathya@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50364}
Given that we already treat feedback vector as a source of truth for
language mode of other store operations and given that the StoreGlobalIC
dispatcher does not depend on the language more anymore, we can just combine
these two bytecodes.
Bug: v8:7206
Change-Id: I27f03f2102ff79ec20fa997eb18dde816f376b00
Reviewed-on: https://chromium-review.googlesource.com/823846
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50102}
RegisterLists should only be allocated via the register allocator. To ensure
this, make the RegisterList constructor private and only expose it to tests
and the BytecodeRegisterAllocator.
Change-Id: I09ebfc5c0f1baecfb1333fd672b96d462fd26fcf
Reviewed-on: https://chromium-review.googlesource.com/822196
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Mythri Alle <mythria@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50073}
Prior to this change, the exponentiation operator was rewritten by the
parser to a call of the Math.pow builtin. However, Math.pow does not
accept BigInt arguments, while the exponentiation operator must accept
them.
This CL
- removes the parser's special treatment of ** and **=, treating them
like any other binary op instead.
- adds a TFC builtin Exponentiate that does the right thing for
all inputs.
- adds interpreter bytecodes Exp and ExpSmi whose handlers call the
Exponentiate builtin. For simplicity, they currently always collect
kAny feedback.
- adds a Turbofan operator JSExponentiate with a typed-lowering to
the existing NumberPow and a generic-lowering to the Exponentiate
builtin. There is currently no speculative lowering.
Note that exponentiation for BigInts is actually not implemented yet,
so we can't yet test it.
Bug: v8:6791
Change-Id: Id90914c9c3fce310ce01e715c09eaa9f294f4f8a
Reviewed-on: https://chromium-review.googlesource.com/785694
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Sathya Gunasekaran <gsathya@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Mythri Alle <mythria@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49696}
Removes Isolate from compilation info and instead threads isolate through
function calls. This ensures that we can't access the isolate from
background thread compilations.
BUG=v8:5203
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I9a4e1cd67c4736e36f609360b996fb55166a1c50
Reviewed-on: https://chromium-review.googlesource.com/751745
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49386}
This eliminates the AstValue class, effectively moving its
implementation into the Literal AstNode. This should cause
no difference in behavior, but it does signal some shifts
in the underlying system. Biggest changes include:
- Reduction in AST memory usage
- No duplicate HeapNumbers in Ignition constant pools
- Non-String values are allocated either at constant pool
creation time (or at boilerplate creation time for literals),
rather than at AstValueFactory::Internalize() time.
There are a variety of test-only/debug-only changes due to these
switches as well.
Bug: v8:6984
Change-Id: I5f178040ce2796d4e7370c24d1063419e1c843a1
Reviewed-on: https://chromium-review.googlesource.com/731111
Commit-Queue: Adam Klein <adamk@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49013}
This removes all but one caller of Literal::raw_value(), thus
hiding AstValue from the rest of the codebase. This is in
preparation to move much of AstValue's implementation up
into Literal itself, thus avoiding the overhead of the
underling ZoneObjects and allowing us to remove complexity
such as the cache of Smi-valued AstValues.
Bug: v8:6984
Change-Id: I1b90aa64b9d26db36ef486afe73cda4473ef866e
Reviewed-on: https://chromium-review.googlesource.com/731109
Reviewed-by: Marja Hölttä <marja@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Adam Klein <adamk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48884}
This adds a new InstanceOfIC where the TestInstanceOf bytecode collects
constant feedback about the right-hand side of instanceof operators,
including both JSFunction and JSBoundFunction instances. TurboFan then
uses the feedback to optimize instanceof in places where the right-hand
side is not a known constant (known to TurboFan).
This addresses the odd performance cliff that we see with instanceof in
functions with multiple closures. It was discovered as one of the main
bottlenecks on the uglify-es test in the web-tooling-benchmark. The
uglify-es test (run in separation) is ~18% faster with this change.
On the micro-benchmark in the tracking bug we go from
instanceofSingleClosure_Const: 69 ms.
instanceofSingleClosure_Class: 246 ms.
instanceofMultiClosure: 246 ms.
instanceofParameter: 246 ms.
to
instanceofSingleClosure_Const: 70 ms.
instanceofSingleClosure_Class: 75 ms.
instanceofMultiClosure: 76 ms.
instanceofParameter: 73 ms.
boosting performance by roughly 3.6x and thus effectively removing the
performance cliff around instanceof.
Bug: v8:6936, v8:6971
Change-Id: Ib88dbb9eaef9cafa4a0e260fbbde73427a54046e
Reviewed-on: https://chromium-review.googlesource.com/730686
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Michael Stanton <mvstanton@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48820}
Moves the feedback vector slot allocation out of ast-numbering and into
bytecode generation directly. This has a couple of benifits, including reduced
AST size, avoid code duplication and reduced feedback vector sizes in many cases
due to only allocating slots when needed. Also removes AstProperties since
this is no longer needed.
AstNumbering is now only used to allocate suspend ids for generators.
BUG=v8:6921
Change-Id: I103e8593c94ef5b2e56c34ef4f77bd6e7d64796f
Reviewed-on: https://chromium-review.googlesource.com/722959
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Stanton <mvstanton@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48757}
This introduces a ToNumeric conversion to the runtime and interpreter.
ToNumeric behaves like ToNumber, except that it also lets BigInts pass.
Bug: v8:6791
Change-Id: Idf9d0b5d283638459fe5893de41cc120356247a7
Reviewed-on: https://chromium-review.googlesource.com/707013
Commit-Queue: Georg Neis <neis@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48440}
Tagged templates were previously desugared during parsing using some
combination of runtime support written in JavaScript and C++, which
prevented some optimizations from happening, namely the constant folding
of the template object in TurboFan optimized code. This CL adds a new
bytecode GetTemplateObject (with a corresponding GetTemplateObject AST
node), which represents the abstract operation in the ES6 specification
and allows TurboFan to simply constant-fold template objects at compile
time (which is explicitly supported by the specification).
This also pays down some technical debt by removing the template.js
runtime support and therefore should reduce the size of the native
context (snapshot) a bit.
With this change in-place the ES6 version microbenchmark in the
referenced tracking bug is now faster than the transpiled Babel
code, it goes from
templateStringTagES5: 4552 ms.
templateStringTagES6: 14185 ms.
templateStringTagBabel: 7626 ms.
to
templateStringTagES5: 4515 ms.
templateStringTagES6: 7491 ms.
templateStringTagBabel: 7639 ms.
which corresponds to a solid 45% reduction in execution time. With some
further optimizations the ES6 version should be able to outperform the
ES5 version. This micro-benchmark should be fairly representative of the
six-speed-templatestringtag-es6 benchmark, and as such that benchmark
should also improve by around 50%.
Bug: v8:6819,v8:6820
Tbr: mlippautz@chromium.org
Change-Id: I821085e3794717fc7f52b5c306fcb93ba03345dc
Reviewed-on: https://chromium-review.googlesource.com/677462
Reviewed-by: Mythri Alle <mythria@chromium.org>
Reviewed-by: Caitlin Potter <caitp@igalia.com>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48126}
This continues to move the "desugaring" of unary operators further
down the pipeline, in this case into the bytecode handlers for new
bytecodes `Negate` and `BitwiseNot` and the corresponding TF code
in BytecodeGraphBuilder.
Bug: v8:6971
Tbr: yangguo@chromium.org
Change-Id: If6b5d6b239a09ef8b4dbde49321614503c0f5beb
Reviewed-on: https://chromium-review.googlesource.com/661146
Commit-Queue: Adam Klein <adamk@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47980}
As part of that change, make ToNumber return in the accumulator.
Bug: v8:6791
Change-Id: I8ce0f4fbc7ad8ee7fb4a32a8a499394395010750
Reviewed-on: https://chromium-review.googlesource.com/658082
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Adam Klein <adamk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47976}
