This CL removes the weak-list of JS functions from the context
and all the code that iterares over it. This list was being used
mainly during deoptimization (for code unlinking) and during
garbage collection. Removing it will improve performance of
programs that create many closures and trigger many scavenge GC
cycles.
No extra work is required during garbage collection. However,
given that we no longer unlink code from JS functions during
deoptimization, we leave it as it is, and on its next activation
we check whether the mark_for_deoptimization bit of that code is
set, and if it is, than we unlink it and jump to lazy compiled
code. This check happens in the prologue of every code object.
We needed to change/remove the cctests that used to check
something on this list.
Working in x64, ia32, arm64, arm, mips64 and mips.
Bug: v8:6637
Change-Id: I7f192652c8034b16a9ea71303fa8e78cda3c48f3
Reviewed-on: https://chromium-review.googlesource.com/600427
Commit-Queue: Juliana Patricia Vicente Franco <jupvfranco@google.com>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47790}
This adds support for lowering {JSCreateArguments} within outermost
frames of type {CreateArgumentsType::kMappedArguments}. It will hence
enable escape analysis to work with such objects and allow for further
optimization.
This also adds a new {NewMappedArgumentsElements} simplfied operator.
Note that escape analysis support for this new operator will be done as
a follow-up.
R=tebbi@chromium.org
Change-Id: I0e2fac25c654f796433f57b116964053b6b68635
Reviewed-on: https://chromium-review.googlesource.com/641454
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47761}
This is a reland of 21da12a983
Original change's description:
> [Compiler] Remove CompileDebugCode and EnsureBytecode and replace with Compile
>
> Removes the Compiler::CompileDebugCode and Compiler::EnsureBytecode functions
> and replaces them with a Compiler::Compile(Handle<SharedFunctionInfo> shared)
> function. The code in compiler.cc is refactored to use this function to compile
> the SharedFunctionInfo when compiling a JSFunction.
>
> Also does some other cleanup:
> - Removes CompileUnoptimizedFunction and inlines into new Compiler function
> - Moves code to create top level SharedFunctionInfo into CompilerTopLevel and
> out of FinalizeUnoptimizedCompile.
>
> BUG=v8:6409
>
> Change-Id: Ic54afcd8eb005c17f3ae6b2355060846e3091ca3
> Reviewed-on: https://chromium-review.googlesource.com/613760
> Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
> Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
> Reviewed-by: Leszek Swirski <leszeks@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#47394}
TBR=yangguo@chromium.orgTBR=jarin@chromium.org
Bug: v8:6409
Change-Id: If2eae66a85f129e746a5ca5c04935540f3f86b04
Reviewed-on: https://chromium-review.googlesource.com/618886
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47399}
This reverts commit 21da12a983.
Reason for revert: Failing on arm64 simulator
Original change's description:
> [Compiler] Remove CompileDebugCode and EnsureBytecode and replace with Compile
>
> Removes the Compiler::CompileDebugCode and Compiler::EnsureBytecode functions
> and replaces them with a Compiler::Compile(Handle<SharedFunctionInfo> shared)
> function. The code in compiler.cc is refactored to use this function to compile
> the SharedFunctionInfo when compiling a JSFunction.
>
> Also does some other cleanup:
> - Removes CompileUnoptimizedFunction and inlines into new Compiler function
> - Moves code to create top level SharedFunctionInfo into CompilerTopLevel and
> out of FinalizeUnoptimizedCompile.
>
> BUG=v8:6409
>
> Change-Id: Ic54afcd8eb005c17f3ae6b2355060846e3091ca3
> Reviewed-on: https://chromium-review.googlesource.com/613760
> Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
> Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
> Reviewed-by: Leszek Swirski <leszeks@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#47394}
TBR=rmcilroy@chromium.org,yangguo@chromium.org,jarin@chromium.org,leszeks@chromium.org
Change-Id: I4ba63e82417a185f1528ff2633eb6c8872fbbfe5
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:6409
Reviewed-on: https://chromium-review.googlesource.com/618687
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47397}
Removes the Compiler::CompileDebugCode and Compiler::EnsureBytecode functions
and replaces them with a Compiler::Compile(Handle<SharedFunctionInfo> shared)
function. The code in compiler.cc is refactored to use this function to compile
the SharedFunctionInfo when compiling a JSFunction.
Also does some other cleanup:
- Removes CompileUnoptimizedFunction and inlines into new Compiler function
- Moves code to create top level SharedFunctionInfo into CompilerTopLevel and
out of FinalizeUnoptimizedCompile.
BUG=v8:6409
Change-Id: Ic54afcd8eb005c17f3ae6b2355060846e3091ca3
Reviewed-on: https://chromium-review.googlesource.com/613760
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47394}
This is in preparation to the removal of the FullCodeGenerator, we no
longer need the ability to stress the underlying implementation.
R=rmcilroy@chromium.org
BUG=v8:6409
Cq-Include-Trybots: master.tryserver.v8:v8_linux_noi18n_rel_ng
Change-Id: Iad3177d6de4a68b57c12a770b6e85ed7a9710254
Reviewed-on: https://chromium-review.googlesource.com/584747
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47276}
My goal was to move breakpoint API to native with minimal changes around, so on inspector side we use v8::debug::BreakpointId instead of String16, on v8::internal::Debug we use i::BreakPoint object instead of break point object created inside of debug.js.
There are a lot of opportunities how we can improve breakpoints (at least we can avoid some of linear lookups to speedup implementation) but I think that as first step we need to remove mirrors/debug.js APIs.
Drive by: debugger-script.js and usage of debugger context in inspector code base.
R=yangguo@chromium.org,jgruber@chromium.org,clemensh@chromium.org
Bug: v8:5510,chromium:652939
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel;master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I0b17972c39053dd4989bbe26db2bb0b88ca378f7
Reviewed-on: https://chromium-review.googlesource.com/593156
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47091}
This adds support to materialize objects when generating a frame summary
for an optimized frame via {OptimizedFrame::Summarize}. Note that this
means each summary might re-materialize objects and hence produce new
object identities every time. All use sites need to be able to cope with
such semantics.
R=jarin@chromium.org
BUG=v8:6586
Change-Id: I85c66ad3e7d247cd40f37a0a6e4391c0ee279706
Reviewed-on: https://chromium-review.googlesource.com/595745
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47067}
Also fix one apparently-harmless bug in the Parser where we failed
to Finalize an empty scope. Without this fix, the DCHECK fails
on any C-style for-loop with a lexical binding that hits the
fast path (this is well-covered by many existing tests in mjsunit).
Thanks to Georg Neis for the suggestion of this DCHECK.
Change-Id: Ie1a8f8809f4d152c87f2da08209c610514645827
Reviewed-on: https://chromium-review.googlesource.com/587750
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Adam Klein <adamk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47046}
Note that this also renames the existing "asm_wasm" variant to use the
more appropriate "stress_asm_wasm" name.
R=rmcilroy@chromium.org
BUG=v8:6409
Cq-Include-Trybots: master.tryserver.v8:v8_linux_noi18n_rel_ng
Change-Id: I1f9550cd03874c678f4583047a4e123a6f090250
Reviewed-on: https://chromium-review.googlesource.com/584879
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46937}
- No need for multiple assertAsyncRan() calls, just do t.plan(count)
- Previously, if you forget to call assertAsyncRan(), the test will still
pass, which is no longer true.
- No longer hold global state (with
asyncAssertsExpected). Previously if one assert wasn't hit then
there's no way to find out which test failed. You'd have to
comment each test and try again.
- Each test runs independently in the microtask queue.
- Better failure reporting by printing the entire function.
Example error :
=== mjsunit/harmony/promise-prototype-finally ===
abort: Expected asserts: 2, Actual asserts: 1
in test: reject/finally/then
assert => {
assert.plan(2);
Promise.reject(3).finally().then(
assert.unreachable,
x => {
assert.equals(3, x);
});
}
Change-Id: Ic3f6272e1e87b8b0121b8c8c7cce19cf90d1f1be
Reviewed-on: https://chromium-review.googlesource.com/455555
Commit-Queue: Sathya Gunasekaran <gsathya@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Daniel Ehrenberg <littledan@chromium.org>
Reviewed-by: Caitlin Potter <caitp@igalia.com>
Cr-Commit-Position: refs/heads/master@{#46910}
Nop bytecodes are required only for break locations in debugger. Since nop bytecode doesn't change program state we can remove all of them.
There are at least two changes which this CL produce:
- we don't provide break position when we load local variable (still provide when load variable from global),
- we don't provide break position for statements without actual break positions (e.g. "a;") - these expressions should be super rare and user always can set breakpoint before or after this statement.
More details in one pager: https://docs.google.com/a/google.com/document/d/1JXlQpfMa9vRojbE272b6GMBbrfh6m_00135iAUOJEz8/edit?usp=sharing
Bug: v8:6425
Change-Id: I4aee73d497a84f7b5d89caa6dda6d3060567dfda
Reviewed-on: https://chromium-review.googlesource.com/543161
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46742}
This makes the runtime rely on the {HasBytecodeArray} predicate to
determine whether code generated by TurboFan was build without any
deoptimization support, as opposed to {asm_function}.
R=rmcilroy@chromium.org
BUG=v8:6589
Change-Id: Id124bed47a5fa02d31ff8fd3eee561b2df6c9226
Reviewed-on: https://chromium-review.googlesource.com/571786
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46694}
Goal of this CL: explicit return from non-async function has position after
return expression as return position (will unblock [1]).
BytecodeArrayBuilder has SetStatementPosition and SetExpressionPosition methods.
If one of these methods is called then next generated bytecode will get passed
position. It's general treatment for most cases.
Unfortunately it doesn't work for Returns:
- debugger requires source positions exactly on kReturn bytecode in stepping
implementation,
- BytecodeGenerator::BuildReturn and BytecodeGenerator::BuildAsyncReturn
generates more then one bytecode and general solution will put return position
on first generated bytecode,
- it's not easy to split BuildReturn function into two parts to allow something
like following in BytecodeGenerator::VisitReturnStatement since generated
bytecodes are actually controlled by execution_control().
..->BuildReturnPrologue();
..->SetReturnPosition(stmt);
..->Return();
In this CL we pass ReturnStatement through ExecutionControl and use it for
position when we emit return bytecode right here.
So this CL only will improve return position for returns inside of non-async
functions, I'll address async functions later.
[1] https://chromium-review.googlesource.com/c/543161/
Change-Id: Iede512c120b00c209990bf50c20e7d23dc0d65db
Reviewed-on: https://chromium-review.googlesource.com/560738
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46687}
The tail call implementation is hidden behind the --harmony-tailcalls
flag, which is off-by-default (and has been unstaged since February).
It is known to be broken in a variety of cases, including clusterfuzz
security issues (see sample Chromium issues below). To avoid letting
the implementation bitrot further on trunk, this patch removes it.
Bug: v8:4698, chromium:636914, chromium:724746
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng;master.tryserver.v8:v8_linux_noi18n_rel_ng
Change-Id: I9cb547101456a582374fdf7b1a3f044a9ef33e5c
Reviewed-on: https://chromium-review.googlesource.com/569069
Commit-Queue: Adam Klein <adamk@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46651}
Removes the --ignition flag which is now on by default. Adds a
--stress-fullcodegen flag which enables running all functions supported
by fullcodegen to be compiled by fullcodegen.
This will enable moving parser internalization later when we are not
stressing fullcodegen or compiling asm.js functions.
BUG=v8:5203, v8:6409, v8:6589
Change-Id: I7fa68016d4e734755434ec0b4e749ef65ffa7f4e
Reviewed-on: https://chromium-review.googlesource.com/565569
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46635}
This is a reland of 5b44ba0e34
Original change's description:
> (Reland) [parser] moved load property position after dot
>
> Currently LdaNamedProperty bytecode for expressions like a.b has position before dot. This CL moves this location after dot.
> It's important for later removing of Nop bytecodes in expressions like a.b() where a is local variable, property call and property load should have the same position.
>
> R=jgruber@chromium.org
> TBR=marja@chromium.org
>
> Bug: v8:6425
> Change-Id: I05c21ca5e018da9c432c6bc963c7a96799336d1c
> Reviewed-on: https://chromium-review.googlesource.com/562879
> Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#46484}
TBR=marja@chromium.org,jgruber@chromium.org
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Bug: v8:6425
Change-Id: I5eba5fe43ad31c5c781ffcc8c604cd9c98baa57e
Reviewed-on: https://chromium-review.googlesource.com/565907
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46542}
In https://chromium-review.googlesource.com/c/472247/, I avoided
running DesugarLexicalBindingsInForStatement() if there were no lexical
loop variables, the function was not resumable, and the variables are
not captured by eval or a function declaration.
I think it's now possible to limit this further, and only do the more
extensive desugaring if there's a function declaration / eval() call
in the loop body. `yield` and `await` are not an issue as those loop
variables are written to the register file and not lost.
This change just removes the `is_resumable()` condition. If it passes
tests, I think it's safe.
BUG=v8:4762, v8:5460, v8:6579
Change-Id: I92d0308ad9401c1338411bc9ae9021f978803d3a
Reviewed-on: https://chromium-review.googlesource.com/563587
Commit-Queue: Caitlin Potter <caitp@igalia.com>
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46536}
This reverts commit 5b44ba0e34.
Reason for revert: Layout tests:
https://build.chromium.org/p/client.v8.fyi/builders/V8-Blink%20Linux%2064/builds/16841
Original change's description:
> (Reland) [parser] moved load property position after dot
>
> Currently LdaNamedProperty bytecode for expressions like a.b has position before dot. This CL moves this location after dot.
> It's important for later removing of Nop bytecodes in expressions like a.b() where a is local variable, property call and property load should have the same position.
>
> R=jgruber@chromium.org
> TBR=marja@chromium.org
>
> Bug: v8:6425
> Change-Id: I05c21ca5e018da9c432c6bc963c7a96799336d1c
> Reviewed-on: https://chromium-review.googlesource.com/562879
> Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#46484}
TBR=kozyatinskiy@chromium.org,jgruber@chromium.org
Change-Id: If9d5fa5f46ed10a407559e9cf10d2a6a54dbe163
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:6425
Reviewed-on: https://chromium-review.googlesource.com/564418
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46491}
Currently LdaNamedProperty bytecode for expressions like a.b has position before dot. This CL moves this location after dot.
It's important for later removing of Nop bytecodes in expressions like a.b() where a is local variable, property call and property load should have the same position.
R=jgruber@chromium.orgTBR=marja@chromium.org
Bug: v8:6425
Change-Id: I05c21ca5e018da9c432c6bc963c7a96799336d1c
Reviewed-on: https://chromium-review.googlesource.com/562879
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46484}
The `FAST_` prefix doesn’t make much sense — they’re all just different cases
with their own optimizations. Packedness being implicit (e.g. `FAST_ELEMENTS`
vs. `FAST_HOLEY_ELEMENTS`) is not ideal, either.
This patch renames the FAST elements kinds as follows:
- e.g. FAST_ELEMENTS => PACKED_ELEMENTS
- e.g. FAST_HOLEY_ELEMENTS => HOLEY_ELEMENTS
The following exceptions are left intact, for lack of a better name:
- FAST_SLOPPY_ARGUMENTS_ELEMENTS
- SLOW_SLOPPY_ARGUMENTS_ELEMENTS
- FAST_STRING_WRAPPER_ELEMENTS
- SLOW_STRING_WRAPPER_ELEMENTS
This makes it easier to reason about elements kinds, and less confusing to
explain how they’re used.
R=jkummerow@chromium.org, cbruni@chromium.org
BUG=v8:6548
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: Ie7c6bee85583c3d84b730f7aebbd70c1efa38af9
Reviewed-on: https://chromium-review.googlesource.com/556032
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Mathias Bynens <mathias@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46361}
Bug: chromium:736758
Change-Id: If49fda42618c27be1472a98399e440ad26b7f199
Reviewed-on: https://chromium-review.googlesource.com/548401
Commit-Queue: Georg Neis <neis@chromium.org>
Reviewed-by: Daniel Clifford <danno@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46241}
This reverts commit 217d654c9b.
Reason for revert: Changes layout tests:
https://build.chromium.org/p/client.v8.fyi/builders/V8-Blink%20Linux%2064/builds/16520
Original change's description:
> [parser] moved load property position after dot
>
> Currently LdaNamedProperty bytecode for expressions like a.b has position before dot. This CL moves this location after dot.
> It's important for later removing of Nop bytecodes in expressions like a.b() where a is local variable, property call and property load should have the same position.
>
> R=jgruber@chromium.org
>
> Bug: v8:6425
> Change-Id: I528c5007de52215beba80851ab04693ecec038e2
> Reviewed-on: https://chromium-review.googlesource.com/543047
> Reviewed-by: Marja Hölttä <marja@chromium.org>
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#46163}
TBR=marja@chromium.org,kozyatinskiy@chromium.org,jgruber@chromium.org
Change-Id: I94543526f39f0a20452fbce1a7bc6744cac66621
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:6425
Reviewed-on: https://chromium-review.googlesource.com/544993
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46171}
This removes the --turbo flag and solely relies on the filter pattern
provided via --turbo-filter when deciding whether to use TurboFan. Note
that disabling optimization wholesale can still be done with --no-opt,
which should be used in favor of --no-turbo everywhere.
Also note that this contains semantic changes to the TurboFan activation
criteria. We respect the filter pattern more stringently and no longer
activate TurboFan just because the source contains patterns forcing use
of Ignition via {AstNumberingVisitor::DisableFullCodegenAndCrankshaft}.
R=rmcilroy@chromium.org
BUG=v8:6408
Change-Id: I0c855f6a62350eb62283a3431c8cc1baa750950e
Reviewed-on: https://chromium-review.googlesource.com/528121
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Michael Stanton <mvstanton@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46167}
Currently LdaNamedProperty bytecode for expressions like a.b has position before dot. This CL moves this location after dot.
It's important for later removing of Nop bytecodes in expressions like a.b() where a is local variable, property call and property load should have the same position.
R=jgruber@chromium.org
Bug: v8:6425
Change-Id: I528c5007de52215beba80851ab04693ecec038e2
Reviewed-on: https://chromium-review.googlesource.com/543047
Reviewed-by: Marja Hölttä <marja@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46163}
Inspector uses only BREAK_POSITION_ALIGNED, no tests pass STATEMENT_ALIGNED. It's exposed only with debugger API but I'm pretty sure that nobody actually uses it and as far as mirrors API is deprecated - it's time to remove it.
R=jgruber@chromium.org
Bug: none
Change-Id: I28d62e145811d3eb6f4d64007c47c51b2ecbaf0f
Reviewed-on: https://chromium-review.googlesource.com/536934
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46056}
I incorrectly assumed that ScopeIterator::SetModuleVariableValue gets called
when the frame is the module function.
R=jgruber@chromium.org, kozyatinskiy@chromium.org
Bug: v8:1569, v8:6484
Change-Id: I1fbad8ccde57280149547c78e679527f7a0c89dd
Reviewed-on: https://chromium-review.googlesource.com/535620
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45961}
The variant in question was intended to test Crankshaft, which is being
deprecated. Note that the variants 'nooptimization' and 'fullcode' still
test configuration where TurboFan is not active.
R=machenbach@chromium.org
BUG=v8:6408
Cq-Include-Trybots: master.tryserver.v8:v8_linux_noi18n_rel_ng
Change-Id: I587c3eee7ba511dfc270aab66b546d2532bc635f
Reviewed-on: https://chromium-review.googlesource.com/528133
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45785}
The two variants "turbofan" and "turbofan_opt" are not part of any of
the default sets of variants that run-tests.py uses. The only way to
trigger execution would be via the --variants flag directly, which our
infrastructure is not doing.
R=machenbach@chromium.org
Change-Id: Ifa58cb4a83a3760ffba73e8b40b417a845f53506
Reviewed-on: https://chromium-review.googlesource.com/526637
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45772}
This removes the test suite variant for stressing Crankshaft from the
list of supported variants. Other stress variants remain untouched.
R=machenbach@chromium.org
Cq-Include-Trybots: master.tryserver.v8:v8_linux_noi18n_rel_ng
Change-Id: Iad236c2b80a1dea21b8be9b931e6a4e88f3ebcc5
Reviewed-on: https://chromium-review.googlesource.com/527094
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45758}
In current implementation in expressions like await foo() we have break location right after foo call and before actual await.
And we additionally have a lot of other statement locations because of do scope.
Let's move async debugging closer to sync debugging and introduce only one break location for await - before awaited function call.
Bug: v8:6425,v8:6162
Change-Id: I7568767856022c49101e7f3b7e39a2e401d21644
Reviewed-on: https://chromium-review.googlesource.com/514046
Reviewed-by: Marja Hölttä <marja@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45625}
This CL improves break locations for expressions like 'var a = <expr>'. Without CL we use <expr> position as break location for initialization statement, with this CL we use position of first character after '=' as position.
Benefits (see test for details):
- only one break in expressions which includes mix of property lookup and calls, e.g. var p = Promise.resolve().then(x => x * 2),
- removed redundant break location for expressions like: let { x, y } = { x: 1, y: 2}.
TBR=dgozman@chromium.org,rmcilroy@chromium.org,machenbach@chromium.org,marja@chromium.org,kozyatinskiy@chromium.org,devtools-reviews@chromium.org,v8-reviews@googlegroups.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: v8:5909
Change-Id: Ie84fa79afeed09e28cf8478ba610a0cfbfdfc294
Reviewed-on: https://chromium-review.googlesource.com/518116
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45598}
This reverts commit 7a9cc70492.
Reason for revert: Changes layout tests:
https://build.chromium.org/p/client.v8.fyi/builders/V8-Blink%20Linux%2064/builds/15882
This is about:
inspector/sources/debugger/source-frame-inline-breakpoint-decorations.html
Original change's description:
> [inspector] moved var initialization break location before init expression
>
> This CL improves break locations for expressions like 'var a = <expr>'. Without CL we use <expr> position as break location for initialization statement, with this CL we use position of first character after '=' as position.
> Benefits (see test for details):
> - only one break in expressions which includes mix of property lookup and calls, e.g. var p = Promise.resolve().then(x => x * 2),
> - removed redundant break location for expressions like: let { x, y } = { x: 1, y: 2}.
>
> Bug: v8:5909
> Change-Id: I039d911903a2826c9859710a63ab0462c992e11b
> Reviewed-on: https://chromium-review.googlesource.com/513926
> Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Reviewed-by: Marja Hölttä <marja@chromium.org>
> Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#45530}
TBR=dgozman@chromium.org,marja@chromium.org,kozyatinskiy@chromium.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: v8:5909
Change-Id: Ibf84401e8050d3c84db219d983de2c6bba0f697f
Reviewed-on: https://chromium-review.googlesource.com/518102
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45547}
This CL improves break locations for expressions like 'var a = <expr>'. Without CL we use <expr> position as break location for initialization statement, with this CL we use position of first character after '=' as position.
Benefits (see test for details):
- only one break in expressions which includes mix of property lookup and calls, e.g. var p = Promise.resolve().then(x => x * 2),
- removed redundant break location for expressions like: let { x, y } = { x: 1, y: 2}.
Bug: v8:5909
Change-Id: I039d911903a2826c9859710a63ab0462c992e11b
Reviewed-on: https://chromium-review.googlesource.com/513926
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45530}
In particular, local variables should be allocated on stack (in bytecode register), and stored/loaded to the generator object on generator suspend/resume.
The CL is based on @adamk's change to scoping/parsers (https://chromium-review.googlesource.com/c/498538/), I only made the debugger cope with this change.
I should note that the CL changes the scope type of suspended generators from ScopeType.Closure to ScopeType.Local. In the future we might want to introduce ScopeType.SuspendedGenerator to make the distinction explicit.
Some of the changes in the tests have been made because the debugger functions do not return scopes of closed generators anymore. Generators should be allowed to throw away their internal state when they finish.
BUG=v8:6368
Review-Url: https://codereview.chromium.org/2898163002
Cr-Commit-Position: refs/heads/master@{#45515}
There are two break locations at the same source location by desugaring:
- call iterator.next,
- before variable assignment.
Additionally location for for..of loops is moved from before "of" to before each variable expression.
We should not report first implicit call to avoid user confusion. User still able to go into .next function with both scenarios:
- when this call is reached by stepOver or stepInto from previous line,
- when this call is reached because of breakpoint at current line.
BUG=v8:6425
R=dgozman@chromium.org,jgruber@chromium.org
Review-Url: https://codereview.chromium.org/2893313002
Cr-Commit-Position: refs/heads/master@{#45509}
This avoids emitting redundant {PopContext} bytecode instructions when
non-local control-flow leaves the method body. It also folds multiple
such {PopContext} instructions into one, in case several scoping levels
are crossed at one. Only the expected context of the target of a local
control-flow transfer matters.
R=rmcilroy@chromium.org
TEST=debugger/regress/regress-crbug-724858
BUG=chromium:724858
Change-Id: Id4a47ae9fea25e75ae1af13619720b16a3975edf
Reviewed-on: https://chromium-review.googlesource.com/512545
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45507}
This reverts commit f7c25da680.
Reason for revert: Fixed
Original change's description:
> Revert "Introducing an event loop mechanism for d8."
>
> This reverts commit de964dbe57.
>
> Reason for revert:
> https://build.chromium.org/p/client.v8/builders/V8%20Linux/builds/17958
>
> Original change's description:
> > Introducing an event loop mechanism for d8.
> >
> > This mechanism ensures APIs like wasm async complete their work,
> > without requiring use of natives (%APIs).
> >
> > The mechanism is similar to the one used in content_shell,
> > which should allow us to easily port tests in that environment.
> >
> > Review-Url: https://codereview.chromium.org/2842843005
> > Cr-Original-Commit-Position: refs/heads/master@{#44908}
> > Bug:
> > Change-Id: I9deee0d256a600c60b42902fc8ef8478e5546344
> > Reviewed-on: https://chromium-review.googlesource.com/494968
> > Commit-Queue: Mircea Trofin <mtrofin@google.com>
> > Reviewed-by: Jochen Eisinger <jochen@chromium.org>
> > Cr-Commit-Position: refs/heads/master@{#45165}
>
> TBR=bradnelson@chromium.org,mtrofin@chromium.org,mtrofin@google.com,jochen@chromium.org
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
>
> Change-Id: Iafec2615d705d1990c57229cab3a988c00b5e12f
> Reviewed-on: https://chromium-review.googlesource.com/498630
> Reviewed-by: Michael Achenbach <machenbach@chromium.org>
> Commit-Queue: Michael Achenbach <machenbach@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#45166}
TBR=bradnelson@chromium.org,machenbach@chromium.org,mtrofin@chromium.org,mtrofin@google.com,jochen@chromium.org,v8-reviews@googlegroups.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Change-Id: Ic3c782e918326e291a6cb9bb349c609e9a340b09
Reviewed-on: https://chromium-review.googlesource.com/498430
Reviewed-by: Mircea Trofin <mtrofin@chromium.org>
Commit-Queue: Mircea Trofin <mtrofin@google.com>
Cr-Commit-Position: refs/heads/master@{#45172}
This reverts commit de964dbe57.
Reason for revert:
https://build.chromium.org/p/client.v8/builders/V8%20Linux/builds/17958
Original change's description:
> Introducing an event loop mechanism for d8.
>
> This mechanism ensures APIs like wasm async complete their work,
> without requiring use of natives (%APIs).
>
> The mechanism is similar to the one used in content_shell,
> which should allow us to easily port tests in that environment.
>
> Review-Url: https://codereview.chromium.org/2842843005
> Cr-Original-Commit-Position: refs/heads/master@{#44908}
> Bug:
> Change-Id: I9deee0d256a600c60b42902fc8ef8478e5546344
> Reviewed-on: https://chromium-review.googlesource.com/494968
> Commit-Queue: Mircea Trofin <mtrofin@google.com>
> Reviewed-by: Jochen Eisinger <jochen@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#45165}
TBR=bradnelson@chromium.org,mtrofin@chromium.org,mtrofin@google.com,jochen@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Change-Id: Iafec2615d705d1990c57229cab3a988c00b5e12f
Reviewed-on: https://chromium-review.googlesource.com/498630
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45166}
This mechanism ensures APIs like wasm async complete their work,
without requiring use of natives (%APIs).
The mechanism is similar to the one used in content_shell,
which should allow us to easily port tests in that environment.
Review-Url: https://codereview.chromium.org/2842843005
Cr-Original-Commit-Position: refs/heads/master@{#44908}
Bug:
Change-Id: I9deee0d256a600c60b42902fc8ef8478e5546344
Reviewed-on: https://chromium-review.googlesource.com/494968
Commit-Queue: Mircea Trofin <mtrofin@google.com>
Reviewed-by: Jochen Eisinger <jochen@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45165}
Reason for revert:
Should define its own NO_HARNESS_PATTERN. See comments.
Original issue's description:
> [test] add --no-harness option to debugger tests.
>
> Review-Url: https://codereview.chromium.org/2831083003
> Cr-Commit-Position: refs/heads/master@{#44774}
> Committed: 43c20d4cc5TBR=caitp@igalia.com,yangguo@chromium.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
Review-Url: https://codereview.chromium.org/2871593002
Cr-Commit-Position: refs/heads/master@{#45163}
1. Replaces --crankshaft with --opt in tests.
2. Also fixes presubmit to check for --opt flag when
assertOptimized is used.
3. Updates testrunner/local/variants.py and
v8_foozie.py to use --opt flag.
This would mean, nooptimize variant means there are
no optimizations. Not even with %OptimizeFunctionOnNextCall.
Bug:v8:6325
Change-Id: I638e743d0773a6729c6b9749e2ca1e2537f12ce6
Reviewed-on: https://chromium-review.googlesource.com/490206
Commit-Queue: Mythri Alle <mythria@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44985}
The bot is at its resource limits.
TBR=yangguo@chromium.org,jgruber@chromium.org
NOTRY=true
Change-Id: I40520aa7ec8a85a16cce2c9f17544d6fb68166bb
Reviewed-on: https://chromium-review.googlesource.com/490087
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44973}
let/const declarations in "standard" C-style for-loops have
some complex desugaring to accommodate the case where loop
loop variables may be captured. This slows down the baseline
performance of for-loops with let variables.
This change attempts to avoid this desugaring if it's known that
the loop variable is not captured at any point. A side effect of
this change is that let/const loop variables, when not captured
within the loop body, are not necessarily shown in the debugger,
similar to other stack-allocated vars.
BUG=v8:4762, v8:5460
R=marja@chromium.org, adamk@chromium.org, yangguo@chromium.org
Change-Id: I8dbe545a12c086f675972bdba60c94998268311a
Reviewed-on: https://chromium-review.googlesource.com/472247
Commit-Queue: Caitlin Potter <caitp@igalia.com>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44731}
This reverts 1c1edda7db. I can't reproduce
the flakes locally anymore, let's see if this sticks.
BUG=v8:5619
Review-Url: https://codereview.chromium.org/2796053002
Cr-Commit-Position: refs/heads/master@{#44381}
This adds support for tracking token positions in the asm.js scanner and
uses these positions to emit a mapping from WASM to asm.js positions.
Note that the mapping is still incomplete (some call sites are not yet
covered).
R=clemensh@chromium.org
TEST=debugger/debug/wasm/asm-debug
BUG=v8:6127
Change-Id: Ic8aad1a85e7d9e19da2eec523fcc73d4984afcc8
Reviewed-on: https://chromium-review.googlesource.com/466046
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44335}
We need to split creating of console and installing memory getter and remove console.assert hack before migration to builtin. We can implement super fast console.assert after migration.
BUG=chromium:588893
R=dgozman@chromium.orgTBR=yangguo@chromium.org
Review-Url: https://codereview.chromium.org/2781883003
Cr-Commit-Position: refs/heads/master@{#44256}
Since we no longer support the ignition-staging configuration
any longer, we can retire the three tier pipeline and the
CompileBaseline functionallity.
We still need support for JSFunction self healing due to
liveedit (which for --no-turbo might end up replacing a
forced Ignition function with a FCG function) - we can
remove this once we remove --no-turbo support.
BUG=v8:4280
Change-Id: I5482abd17785324654e022affd6bdb555b19b181
Reviewed-on: https://chromium-review.googlesource.com/452620
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44141}
TBR=yangguo@chromium.org
Change-Id: Iaed993ed1a61003e35bb40d1f9e0d78864979b2c
Reviewed-on: https://chromium-review.googlesource.com/459443
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Adam Klein <adamk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44127}
Proposed behaviour:
- StepNext at return position go into next function call (no changes with current behavior, but implemented in v8::Debug instead of hack on inspector side);
- StepOut at return position go into next non-current function call.
We need this to have better stepping in cases with native functions, blackboxed functions and/or different embedder calls (e.g. event listeners).
New behavior could be illustrated with two examples (for more see stepping-with-natives-and-frameworks test):
- let's assume that we've blackboxed callAll function, this function just takes its arguments and call one after another:
var foo = () => 1;
callAll(foo, foo, () => 2);
If we break inside of first call of function foo. Then on..
..StepNext - we're able to reach second call of function foo,
..StepOut - we're able to reach () => 2 call.
- let's consider case with native function:
[1,2,3].map(x => x * 2)
If we break inside of first callback call, then with StepNext we can iterate through all calls of callback, with StepOut we go to next statement after .map call.
Implementation details:
- when we request break we schedule step-in function call for any step action at return position and for step-in at any position,
- when we request StepOut at return position - we mark current function as needed-to-be-ignored inside of PrepareStepIn(function) call,
- when we request StepOut at not return position - we set break at return position and ask debugger to just repeat last step action on next stepping-related break.
Design doc: https://docs.google.com/document/d/1ihXHOIhP_q-fJCA0e2EiXz_Zr3B08KMjaPifcaqZ60Q/edit
BUG=v8:6118,chromium:583193
R=dgozman@chromium.org,yangguo@chromium.org
Review-Url: https://codereview.chromium.org/2758483002
Cr-Commit-Position: refs/heads/master@{#44028}
Also add tests for operators.
BUG=v8:5821
Change-Id: I76cfde94324c7f05de61cb60f26d5168da0a9aa5
Reviewed-on: https://chromium-review.googlesource.com/456500
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43922}
String case conversion is known to debug-evaluate to not have a side
effect in noi18n mode, but debug-evaluate thinks it has a side effect
in i18n mode. Update the tests accordingly.
Verified locally that the test passes in i18n and noi18n mode (not sure
whether the noi18n trybot executes this test).
CQ_INCLUDE_TRYBOTS=master.tryserver.v8:v8_linux_noi18n_rel_ng
Review-Url: https://codereview.chromium.org/2750403004
Cr-Commit-Position: refs/heads/master@{#43882}
Mark slow tests discovered by manual audit of reported durations.
Slow tests will run first, which will lead to higher test runner throughput.
Also some tests have flaky timeouts occasionally.
BUG=chromium:601468
Change-Id: If9aeb5422e79ff25b867b01c50386a5fdebeb494
Reviewed-on: https://chromium-review.googlesource.com/455736
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43819}
This makes it possible to directly request testing noturbofan_stress on the command line.
BUG=chromium:682617
TBR=mstarzinger@chromium.org,mvstanton@chromium.org,rmcilroy@chromium.org
NOTRY=true
Change-Id: I6ba9a022c4ef24fb5abe6878d3f2f972e8461eb8
Reviewed-on: https://chromium-review.googlesource.com/453180
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43748}
The switch statement itself is part of the switch block.
However, the source position of the statement is outside of
the block. This leads to confusion for the debugger, if the
switch block pushes a block context: the current context is
a block context, but the scope analysis based on the current
source position tells the debugger that we should be outside
the scope, so we should have the function context.
R=marja@chromium.org
BUG=v8:6085
Review-Url: https://codereview.chromium.org/2744213003
Cr-Commit-Position: refs/heads/master@{#43744}
This fixes the catch predictions for the following builtins --
AsyncFunctionAwaitCaught
AsyncFunctionAwaitUncaught
PromiseResolveClosure
ResolvePromise
PromiseResolve
Added tests for each.
Added whitelist for builtins behind a flag.
BUG=chromium:691875
Change-Id: I816cafdb69f0c9f1eefc440a0a44c36713d0b7dc
Reviewed-on: https://chromium-review.googlesource.com/450894
Commit-Queue: Sathya Gunasekaran <gsathya@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43725}
Once we enabled --turbo by default we need to turn all the implications
off with --no-turbo as well. Chrome sets flags in V8 using SetFlagFromString,
which enforces the implications each time it is called. Therefore, if --turbo
is enabled by default, and an unrelated flag is set, the turbo implications are
enabled but not later disabled if we set --no-turbo. To fix this, add negative
implications as well.
BUG=chromium:692409
Change-Id: Iadb0ca542f49ba65c7419cda8c7a03636a8d5ba9
Reviewed-on: https://chromium-review.googlesource.com/451320
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43655}
Map OOM breaks generated by inspector to DebugEvent.OOM.
This avoids generating unintentional DebugEvent.Break events.
Also be more future-proof in event categorization.
On a related note, this CL also fixes a DCHECK in
Runtime::GetFrameDetails.
The receiver needs to be grabbed from the inlined frame, not
the outer optimized frame. Optimized frames only provide the
receiver on a best-effort basis.
BUG=v8:5950
Review-Url: https://codereview.chromium.org/2696173002
Cr-Commit-Position: refs/heads/master@{#43244}
This introduces new maps to track whether we have created at most one
closure. If we have created just one closure, Turbofan will
specialize the code to its context.
Review-Url: https://codereview.chromium.org/2680313002
Cr-Commit-Position: refs/heads/master@{#43108}
Collect code coverage from the available invocation counts.
The granularity is at function level, and invocation counts may
be lost to GC.
Coverage::Collect returns a std::vector of Coverage::ScriptData.
Each ScriptData contains a script ID and a std::vector of
Coverage::RangeEntry.
Each RangeEntry consists of a end position and the invocation
count. The start position is implicit from the end position of
the previous RangeEntry, or 0 if it's the first RangeEntry.
R=jgruber@chromium.org
BUG=v8:5808
Review-Url: https://codereview.chromium.org/2689493002
Cr-Commit-Position: refs/heads/master@{#43072}
- Remove obsolete BreakLocatorType.
- Perform PrepareStepOnThrow after OnException event, in case stepping
was scheduled in the exception event.
- Use frame count instead of frame pointer for stepping. Frame pointer
is not reliable due to possible deopts.
- Consistently check for inlined functions in inlined frames.
- Use SharedFunctionInfo in FloodWithOneshot and EnsureDebugInfo.
R=jgruber@chromium.org
BUG=v8:5901
Review-Url: https://codereview.chromium.org/2664793002
Cr-Commit-Position: refs/heads/master@{#42878}
The mentioned asserts did not work properly with interpreted and turbofanned functions.
To fix this issue %GetOptimizationStatus() now returns a set of flags instead of a single value.
This CL also adds more helper functions to mjsunit, like isNeverOptimize(), isAlwaysOptimize(),
isOptimized(fun), etc.
BUG=v8:5890
Review-Url: https://codereview.chromium.org/2654733004
Cr-Original-Commit-Position: refs/heads/master@{#42703}
Committed: d1ddec7857
Review-Url: https://codereview.chromium.org/2654733004
Cr-Commit-Position: refs/heads/master@{#42731}
Previously, when restarting a frame, we would rewrite all frames
between the debugger activation and the frame to restart to squash
them, and replace the return address with that of a builtin to
leave that rewritten frame, and restart the function by calling it.
We now simply remember the frame to drop to, and upon returning
from the debugger, we check whether to drop the frame, load the
new FP, and restart the function.
R=jgruber@chromium.org, mstarzinger@chromium.org
BUG=v8:5587
Review-Url: https://codereview.chromium.org/2636913002
Cr-Commit-Position: refs/heads/master@{#42725}
