All module expressions, and all variables that might refer to modules,
are assigned interfaces (module types) that are resolved using
unification. This is necessary to deal with the highly recursive
nature of ES6 modules, which does not allow any kind of bottom-up
strategy for resolving module names and paths.
Error messages are rudimental right now. Probably need to track
more information to make them nicer.
R=svenpanne@chromium.org
BUG=v8:1569
TEST=
Review URL: https://chromiumcodereview.appspot.com/9615009
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10966 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Previously, there were 1 or 2 calls to the runtime when accessors were changed
or set. This doesn't really work well with property attributes, leading to some
hacks and complicates things even further when trying to share maps in presence
of accessors. Therefore, the runtime entry now takes the full triple (getter,
setter, attributes), where the getter and/or the setter can be null in case they
shouldn't be changed.
For now, we do basically the same on the native side as we did before on the
JavaScript side, but this will change in future CLs, the current CL is already
large enough.
Note that object literals with a getter and a setter for the same property still
do 2 calls, but this is a little bit more tricky to fix and will be handled in a
separate CL.
Review URL: https://chromiumcodereview.appspot.com/9616016
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10956 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Inlined strict mode functions (that are not called as methods) will get
their receiver reset to undefined. This should not happen when inlining
constructors.
This change also simplifies the test suite to reuse the same closures
into which constructors get inlined and use gc() to force V8 to forget
collected type feedback.
R=vegorov@chromium.org
TEST=mjsunit/compiler/inline-construct
Review URL: https://chromiumcodereview.appspot.com/9597017
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10920 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The old code used a separate HToInt32 instruction which had a wrong register
constraint for the input register which caused wrong result when the stored value
is used after a typed array store. (UseRegister instead of UseTempRegister) when no
SSE3 is available.
This change fixes it by replacing HToInt32 with the corresponding HChange
instruction which has correct register contraints.
TEST=mjsunit/compiler/regress-toint32.js
Review URL: https://chromiumcodereview.appspot.com/9565007
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10891 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This allows elements of the non-strict arguments object to be redefined
with custom attributes and still maintain an alias into the context.
Such a slow alias is maintained by placing a special marker into the
dictionary backing store of the arguments object.
R=rossberg@chromium.org
BUG=v8:1772
TEST=test262,mjsunit/object-define-property
Review URL: https://chromiumcodereview.appspot.com/9460004
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10827 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Modify PreProcessOsrEntry to work with OSR entries that have non-empty expression stack.
Modify graph builder to take for-in state from environment instead of directly referencing emitted instructions.
Extend %OptimizeFunctionOnNextCall with an argument to force OSR to make writing OSR tests easier: %OptimizeFunctionOnNextCall(f, "osr").
R=fschneider@chromium.org
TEST=test/mjsunit/compiler/optimized-for-in.js
Review URL: https://chromiumcodereview.appspot.com/9431030
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10796 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Only JSObject enumerables with enum cache (fast case properties, no interceptors, no enumerable properties on the prototype) are supported.
HLoadKeyedGeneric with keys produced by for-in enumeration are recognized and rewritten into direct property load by index. For this enum-cache was extended to store property indices in a separate array (see handles.cc).
New hydrogen instructions:
- HForInPrepareMap: checks for-in fast case preconditions and returns map that contains enum-cache;
- HForInCacheArray: extracts enum-cache array from the map;
- HCheckMapValue: map check with HValue map instead of immediate;
- HLoadFieldByIndex: load fast property by it's index, positive indexes denote in-object properties, negative - out of object properties;
Changed hydrogen instructions:
- HLoadKeyedFastElement: added hole check suppression for loads from internal FixedArrays that are knows to have no holes inside.
R=fschneider@chromium.org
BUG=
TEST=
Review URL: https://chromiumcodereview.appspot.com/9425045
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10794 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
* Turned all uses of 'const' into 'var'.
* Turned all uses of local 'function' into 'var'.
* Added a couple of missing toplevel 'var' declarations.
One consequence is that the properties on the builtin object are no longer
non-writable, and I had to adapt one test. Is that a problem?
Unfortunately, we cannot actually switch the library scripts to strict mode
by default, because that makes observable things like poisoned .caller properties
for library functions.
Also removed dead flag code in Compiler::Compile.
R=yangguo@chromium.org
BUG=
TEST=
Review URL: https://chromiumcodereview.appspot.com/9415010
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10758 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This extends the current support for nested object literals we already
have in Crankshaft, to also support nested array literals and mixed
nested literals containing arrays and objects. All three types are
generated by the unified HFastLiteral instruction.
All previous upper bounds on nested literal graphs remain unchanged,
keeping the size of generated code in check.
The main intention is to boost performance of two-dimensional array
literals containing constant elements (aka. matrices).
R=danno@chromium.org
TEST=mjsunit/compiler/literals-optimized
Review URL: https://chromiumcodereview.appspot.com/9403018
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10734 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Until now we only could inline as specialized HIR instructions when called
as a method (e.g. Math.abs)
It is very common practice to abbreviate calls to those functions by defining
a global or local variable like:
var a = Math.abs;
var x = a(123);
This change allows inlining them when called as a function (global or local).
Review URL: https://chromiumcodereview.appspot.com/9365013
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10640 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Runtime_DebugEvaluate creates an empty context which is not correctly handled in FullCodeGenerator::ContextSlotOperandCheckExtensions because the corresponding scope indicates that it has no context.
BUG=crbug.com/107996
TEST=test/mjsunit/regress/regress-crbug-107996.js
Review URL: https://chromiumcodereview.appspot.com/9310027
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10582 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
For calls of the form ident(...) record position of the identifier as the position of the call. For other calls record positions of the opening parenthesis.
This guarantees that for expressions of the form function(){}() call position will not intersect with positions recorded for function literal which is used by the debugger for scope chain resolution.
R=kmillikin@chromium.org
BUG=http://crbug.com/109195
TEST=test/mjsunit/regress/regress-109195.js
Review URL: http://codereview.chromium.org/9125001
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10350 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
CPU-eating DOS attacks against node.js servers. Based on code from
Bert Belder. This version only solves the issue for those that compile
V8 themselves or those that do not use snapshots. A snapshot-based
precompiled V8 will still have predictable string hash codes.
Review URL: http://codereview.chromium.org/9086006
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10330 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
We use foreign callbacks to make some properties shadow internal values
but still behave as data properties from within JavaScript. This means
when a value is passed to Object.defineProperty() on such a property,
it should update the internal value instead of redefinind the property
and destroying the shadowing.
R=rossberg@chromium.org
BUG=v8:1530
TEST=mjsunit/regress/regress-1530,test262/S15.3.3.1_A4
Review URL: http://codereview.chromium.org/8996008
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10279 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This test deleted its working directory and then tried to run several
shell commands which caused a failure on nfs.
Changes:
-TEST_DIR is only removed at the very end of the test
-the working directory is changed to /tmp at the beginning so that
every iteration (when running with --stress-opt) has a valid working directory
BUG=
TEST=
Review URL: http://codereview.chromium.org/8936004
Patch from Daniel Kalmar <kalmard@homejinni.com>.
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10240 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This CL adds support for loading from and storing to context slots
belonging to harmony let or const bound variables. Checks for the
hole value are performed and the function is deoptimized if they fail.
The full-codegen generated code will take care of properly throwing
a reference error in these cases.
TEST=mjsunit/harmony/block-let-crankshaft.js
Review URL: http://codereview.chromium.org/8820015
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10220 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This is the first CL in a series that add support for the harmony scoping
features to crankshaft. This CL specifically adds support for stack
allocated 'let' and 'const' declared variables in function scopes.
TEST=mjsunit/harmony/block-let-crankshaft.js
Review URL: http://codereview.chromium.org/8806012
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10171 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The ES.next draft rev 4 in section 11.13 reads:
It is a Syntax Error if the AssignmentExpression is contained in extended code
and the LeftHandSideExpression is an Identifier that does not statically resolve
to a declarative environment record binding or if the resolved binding is an
immutable binding.
This CL adds corresponding static checks for the immutable binding case.
TEST=mjsunit/harmony/block-const-assign
Review URL: http://codereview.chromium.org/8688007
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10156 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The debugger preparation did not take optimized functions - including
inlined function into account. This caused the full-code used for
deoptimization to be the "lazy compile" builtin which did not work and
caused V8 to crash.
R=yangguo@chromium.org
BUG=chromium:105375, v8:1782
TEST=test/mjsunit/debug-break-inline.js
Review URL: http://codereview.chromium.org//8728031
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10094 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The ES.next drafts require that source code that matches the productions for
let and const bindings outside the extended mode trigger early syntax
errors. This CL adapts the parser / preparser accordingly under the harmony
scoping flag.
Summary:
* Harmony scoping flag not set: Old semantics allowing const in classic mode
with function level scope. Const binding in strict mode and let bindings in
classic and strict mode trigger early syntax errors.
* Harmony scoping is set: Use new harmony const and let in
extended mode and old const in classic mode. This is to preserve
compatibility with current web pages that already use
non-standard implementations of const. An early syntax error is
thrown on const in strict mode and on let in classic and strict
mode.
This depends on:
http://codereview.chromium.org/8562002/
TEST=mjsunit/harmony/block-early-errors.js
Review URL: http://codereview.chromium.org/8564001
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10079 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
source code positions it gets from the program counter to recreate the scope
chain by reparsing the function or program.
This CL includes the following changes
* Adds source code positions for the assignment added by the rewriter.
* Run the preparser over global code first.
* Use the ScopeType from the ScopeInfo to determine if the code being debugged
is eval, function or global code instead of looking up the '.result' symbol.
TEST=mjsunit/debug-stepout-scope.js
Review URL: http://codereview.chromium.org/8590027
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10076 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This CL introduces a third mode next to the non-strict
(henceforth called 'classic mode') and 'strict mode'
which is called 'extended mode' as in the current
ES.next specification drafts. The extended mode is based on
the 'strict mode' and adds new functionality to it. This
means that most of the semantics of these two modes
coincide.
The 'extended mode' is entered instead of the 'strict mode'
during parsing when using the 'strict mode' directive
"use strict" and when the the harmony-scoping flag is
active. This should be changed once it is fully specified how the 'extended mode' is entered.
This change introduces a new 3 valued enum LanguageMode
(see globals.h) corresponding to the modes which is mostly
used by the frontend code. This includes the following
components:
* (Pre)Parser
* Compiler
* SharedFunctionInfo, Scope and ScopeInfo
* runtime functions: StoreContextSlot,
ResolvePossiblyDirectEval, InitializeVarGlobal,
DeclareGlobals
The old enum StrictModeFlag is still used in the backend
when the distinction between the 'strict mode' and the 'extended mode' does not matter. This includes:
* SetProperty runtime function, Delete builtin
* StoreIC and KeyedStoreIC
* StubCache
Review URL: http://codereview.chromium.org/8417035
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10062 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Changes the way we do lazy deoptimization:
1. For side-effect instructions, we insert the lazy-deopt call at
the following LLazyBailout instruction.
CALL
GAP
LAZY-BAILOUT ==> lazy-deopt-call
2. For other instructions (StackCheck) we insert it right after the
instruction since the deopt targets an earlier deoptimization environment.
STACK-CHECK
GAP ==> lazy-deopt-call
The pc of the lazy-deopt call that will be patched in is recorded in the
deoptimization input data. Each Lithium instruction can have 0..n safepoints.
All safepoints get the deoptimization index of the associated LAZY-BAILOUT
instruction. On lazy deoptimization we use the return-pc to find the safepoint.
The safepoint tells us the deoptimization index, which in turn finds us the
PC where to insert the lazy-deopt-call.
Additional changes:
* RegExpLiteral marked it as having side-effects so that it
gets an explicitlazy-bailout instruction (instead of
treating it specially like stack-checks)
* Enable target recording CallFunctionStub to achieve
more inlining on optimized code.
BUG=v8:1789
TEST=jslint and uglify run without crashing, mjsunit/compiler/regress-lazy-deopt.js
Review URL: http://codereview.chromium.org/8492004
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10006 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Previously we omitted all cases where the global eval property was shadowed,
even if by a variable holding the same value. ES5 requires us to treat these
as direct calls.
We still throw if calling indirect eval with a detached global object.
BUG=v8:994
TEST=mjsunit/eval.js
Review URL: http://codereview.chromium.org/8343054
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@9838 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This fixes Date.prototyoe.toISOString to throw a RangeError exception
for invalid time values. It also includes a fix to removes the arbitrary
(and completely bogus) range limit on the date value during construction
of a Date object. Note that we still have bogus range limits on the year
and month values.
R=lrn@chromium.org
BUG=v8:1792
TEST=mjsunit/date,test262/15.9.5.43-0-*
Review URL: http://codereview.chromium.org/8392036
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@9829 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This change fixes a off-by-one level error when dropping the
function from the environment. The function of the outermost
environment was not dropped.
BUG=v8:1785
TEST=test/mjsunit/compiler/regress-inline-callfunctionstub.js
Review URL: http://codereview.chromium.org/8341019
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@9789 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
