Reason for revert:
The test failure was unrelated; relanding.
Original issue's description:
> Revert of Check that array length stays a safe integer in Array.prototype.push (patchset #7 id:120001 of https://codereview.chromium.org/1428483002/ )
>
> Reason for revert:
> Caused for-in-opt test to fail
>
> Original issue's description:
> > Check that array length stays a safe integer in Array.prototype.push
> >
> > This patch adds a check in Array.prototype.push to assert that the new
> > length does not become greater than 2**53-1. Such a length would be
> > dangerous because integer arithmetic becomes imprecise after the
> > boundary. The check is also required by a test262 test.
> >
> > R=adamk
> > LOG=Y
> > BUG=v8:3087
> >
> > Committed: https://crrev.com/e68adf4548dd101dc08fcbff14444152fb1b7fe7
> > Cr-Commit-Position: refs/heads/master@{#31588}
>
> TBR=adamk@chromium.org
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=v8:3087
>
> Committed: https://crrev.com/78abedb94431a233842fcb2f7a910805a05bed09
> Cr-Commit-Position: refs/heads/master@{#31590}
TBR=adamk@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:3087
Review URL: https://codereview.chromium.org/1424823005
Cr-Commit-Position: refs/heads/master@{#31610}
Previously ChangeLowering would always box float64 values when going to
tagged representation, but that introduces a lot of deoptimizer loops
and polymorphism into TurboFan, which is unfortunate and unnecessary.
This adds some logic to ChangeFloat64ToTagged to try harder to create a
Smi when going from Float64 to Tagged, instead of always allocating a
HeapNumber. This might need some additional tweaking, but at least it
makes it possible to start comparing TurboFan and Crankshaft for some
regular JavaScript.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1420913003
Cr-Commit-Position: refs/heads/master@{#31609}
Full-codegen prepared for the bailout in the wrong place, causing side
effects to be replayed when they shouldn't. Crankshaft and Turbofan are
in agreement about where the deopt should jump to.
TEST=mjsunit/for-in-opt
R=jarin@chromium.org
BUG=v8:4381
LOG=y
Review URL: https://codereview.chromium.org/1413923005
Cr-Commit-Position: refs/heads/master@{#31607}
Up until now, if one wanted to specify an explicit stack location or register as an operand for an instruction, it had to also be
explicitly associated with a virtual register as a so-called
FixedRegister or FixedStackSlot.
For the implementation of tail calls, the plan is to use the gap
resolver needs to shuffle stack locations from the caller to the
tail-called callee. In order to do this, it must be possible to
explicitly address operand locations on the stack that are not
associated with virtual registers.
This CL introduces ExplictOperands, which can specify a specific
register or stack location that is not associated with virtual
register. This will allow tail calls to specify the target
locations for the necessary stack moves in the gap for the tail
call without the core register allocation having to know about
the target of the stack moves at all.
In the process this CL:
* creates a new Operand kind, ExplicitOperand, with which
instructions can specify register and stack slots without an
associated virtual register.
* creates a LocationOperand class from which AllocatedOperand and
ExplicitOperand are derived and provides a common interface to
get Register, DoubleRegister and spill slot information.
* removes RegisterOperand, DoubleRegisterOperand,
StackSlotOperand and DoubleStackSlotOperand, they are subsumed
by LocationOperand.
* addresses a cleanup TODO in AllocatedOperand to reduce the
redundancy of AllocatedOperand::Kind by using machine_type() to
determine if an operand corresponds to a general purpose or
double register.
BUG=v8:4076
LOG=n
Review URL: https://codereview.chromium.org/1389373002
Cr-Commit-Position: refs/heads/master@{#31603}
Adds a scavenge GC pass that collects unmodified references instead of
processing object groups. This mode can be controlled by setting
FLAG_scavenge_reclaim_unmodified_objects. By default this is turned off.
Also, modified a test case to suit the handle the new GC pass.
BUG=v8:4421
LOG=N
Review URL: https://codereview.chromium.org/1410593005
Cr-Commit-Position: refs/heads/master@{#31599}
This introduces a JSConvertReceiver operator to model the implicit
conversion of receiver values for sloppy callees. It is used by the
JSInliner for now, but can also be used to model direction function
calls that bypass call stubs.
Also note that a hint is passed to said operator whenever the source
structure constrains the receiver value type. This hint allows for
optimizations in the lowering of the operator.
The underlying specification in ES6, section 9.2.1.2 is the basis for
this implementation.
R=bmeurer@chromium.org
TEST=mjsunit/compiler/receiver-conversion
BUG=v8:4493, v8:4470
LOG=n
Review URL: https://codereview.chromium.org/1412223015
Cr-Commit-Position: refs/heads/master@{#31598}
Change CompareNilIC to return true/false instead of 1/0, and use the
CompareNilICStub in TurboFan for abstract equality with null/undefined.
This way we don't always run into the %Equals runtime fallback when
comparing objects with null/undefined.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1417503008
Cr-Commit-Position: refs/heads/master@{#31596}
Currently we still (mis)used some machine operators in typed lowering
(namely Word32Or, Word32Xor and Word32And). But these operators are
"polymorphic" in the signedness of their inputs and output, hence the
representation selection (and thereby simplified lowering) was unable to
figure out whether a bitwise operation that was seen would produce an
unsigned or a signed result. If such nodes also have frame state uses,
the only safe choice was float64, which was not only a lot less ideal,
but also the main cause of the for-in related deoptimizer loops.
Adding dedicated NumberBitwiseOr, NumberBitwiseAnd and NumberBitwiseXor
simplified operators not only gives us precise (and correct) typing for
the bitwise operations, but also allows us to actually verify the graph
properly after typed lowering.
Drive-by-fix: Remove the double-to-smi magic from the Deoptimizer, which
is responsible for various deopt-loops in TurboFan, and is no longer
needed with the addition of the NumberBitwise operators.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1422213002
Cr-Commit-Position: refs/heads/master@{#31594}
With ES6 21.2.5.8, step 13, we no longer have to keep up the illusion
that matching and calling replace function is interleaved. This is
observable through unspec'ed static properties such as RegExp.$1.
Last match info not working yet.
R=littledan@chromium.org
Review URL: https://codereview.chromium.org/1418703003
Cr-Commit-Position: refs/heads/master@{#31593}
The test mjsunit/regress/regress-sqrt compares the result of Math.sqrt function
when using full-compiler and turbofan/crankshaft compiler seperately. But according
to glibc bug fixing(https://sourceware.org/bugzilla/show_bug.cgi?id=14032). The
glibc implementation of std::sqrt() (It is invoked in the generated code when
full-compiler is used.) will change since glibc 2.19.
In order to keep consistence of Math.sqrt translation in turbofan compiler
and the pass of mjsunit/regress/regress-sqrt. we translate the Math.sqrt func
according to the same fix in glibc change. If the GLIBC version >=2.19, we will
set the precision to Double. (the original is extended-double).
This fix is to fix the same issue in https://codereview.chromium.org/606403002 for
crankshaft. This fix may be ported for crankshaft too.
BUG=
Review URL: https://codereview.chromium.org/1425763002
Cr-Commit-Position: refs/heads/master@{#31592}
Reason for revert:
Caused for-in-opt test to fail
Original issue's description:
> Check that array length stays a safe integer in Array.prototype.push
>
> This patch adds a check in Array.prototype.push to assert that the new
> length does not become greater than 2**53-1. Such a length would be
> dangerous because integer arithmetic becomes imprecise after the
> boundary. The check is also required by a test262 test.
>
> R=adamk
> LOG=Y
> BUG=v8:3087
>
> Committed: https://crrev.com/e68adf4548dd101dc08fcbff14444152fb1b7fe7
> Cr-Commit-Position: refs/heads/master@{#31588}
TBR=adamk@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:3087
Review URL: https://codereview.chromium.org/1418093007
Cr-Commit-Position: refs/heads/master@{#31590}
Reduce code duplication somewhat restructure the code to make
it easier to spot the code paths for the different property
cell types.
R=jarin@chromium.org
BUG=v8:4470
LOG=n
Review URL: https://codereview.chromium.org/1413383004
Cr-Commit-Position: refs/heads/master@{#31589}
This patch adds a check in Array.prototype.push to assert that the new
length does not become greater than 2**53-1. Such a length would be
dangerous because integer arithmetic becomes imprecise after the
boundary. The check is also required by a test262 test.
R=adamk
LOG=Y
BUG=v8:3087
Review URL: https://codereview.chromium.org/1428483002
Cr-Commit-Position: refs/heads/master@{#31588}
- inner_scope_uses_arguments_ was completely unused
- The public accessor for contains_with() was not called
- inside_with() had helper methods on Parser and PatternRewriter, but was
only called in one place.
Review URL: https://codereview.chromium.org/1409253007
Cr-Commit-Position: refs/heads/master@{#31587}
Adds support for loading from and storing to outer context
variables. Also adds support for declaring functions on contexts and
locals. Finally, fixes a couple of issues with StaContextSlot where
we weren't emitting the write barrier and therefore would crash in the
GC.
Also added code so that --print-bytecode will output the
function name before the bytecodes, and replaces MachineType with StoreRepresentation in RawMachineAssembler::Store and updates tests.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1425633002
Cr-Commit-Position: refs/heads/master@{#31584}
The upper 32-bits of the FP compare register are undefined in
the float32 case. The compare instruction returns all 1's or
all 0's, so just use the LS bit.
Remove unnecessary use of 'at' reg. Change mips32 for consistency,
but it did not have the bug.
TEST=mjsunit/asm/embenchen/box2d (r6)
BUG=
Review URL: https://codereview.chromium.org/1425603002
Cr-Commit-Position: refs/heads/master@{#31582}
Drive-by-fix: Move IC::GetRootConstructor to Map::GetConstructorFunction,
so we can use that in the ICs, Crankshaft and Turbofan.
R=jarin@chromium.org
BUG=v8:4470
LOG=n
Review URL: https://codereview.chromium.org/1416493007
Cr-Commit-Position: refs/heads/master@{#31577}
Adds support and tests for conditional (ternary) expressions.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1417053004
Cr-Commit-Position: refs/heads/master@{#31575}
Reason for revert:
Causes memory footprint regression: https://code.google.com/p/chromium/issues/detail?id=541135
The intent of the code here was to advance the inline allocation limit without counting the allocated memory towards a step. Calling LowerInlineAllocationLimit this way is a blunt way of doing it, but it works.
At this point it is simplest to revert this CL. My follow-on CL (https://codereview.chromium.org/1404523002/) can address the 'bluntness' of calling LowerInlineAllocationLimit from here along with leaving a comment about the intent.
revert_cq: 1
revert_reason_textarea: Causes memory footprint regression: https://code.google.com/p/chromium/issues/detail?id=541135
The intent of the code here was to advance the inline allocation limit without counting the allocated memory towards a step. Calling LowerInlineAllocationLimit this way is a blunt way of doing it, but it works.
At this point it is simplest to revert this CL. My follow-on CL (https://codereview.chromium.org/1404523002/) can address the 'bluntness' of calling LowerInlineAllocationLimit from here along with leaving a comment about the intent.
Original issue's description:
> [heap] remove unneeded call to LowerInlineAllocationLimit
>
> Calling LowerInlineAllocationLimit from the bottom of Heap::Scavenge seems to be
> a no-op.
>
> new_space_.LowerInlineAllocationLimit(
> new_space_.inline_allocation_limit_step());
>
> LowerInlineAllocatoinLimit does the following things:
>
> 1. Set the inline_allocation_limit_step_ to the passed in value. No-op.
> 2. Calls UpdateInlineAllocationLimit(0). This is unnecessary here as it has
> already been called when new_space_.ResetAllocationInfo was called above.
> 3. Sets top_on_previous_step_. This again is unnecessary as it gets reached by
> ResetAllocationInfo as well.
>
> BUG=
> R=hpayer@chromium.org,ulan@chromium.org
>
> Committed: https://crrev.com/9f8e8b835a468b1622c5350a01a97bc32c5b2fb7
> Cr-Commit-Position: refs/heads/master@{#31156}
TBR=hpayer@chromium.org,ulan@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:541135
LOG=n
Review URL: https://codereview.chromium.org/1405043005
Cr-Commit-Position: refs/heads/master@{#31574}
Introduce new typing rules for LoadField[Map], which try to take into
account stable map information if the object either has type Constant or
type Class. If the map of the object is stable but can transition we
have to introduce a code dependency in the Typer to make sure that the
information (the Constant type we infer for LoadField[Map]) is valid
(and stays valid).
This also settles the policy for depending on map stability: The
definition can introduce any number of maps, without having to pay
attention to stability (i.e. you can always use Type::Class to introduce
a map that is propagated along the value edges), and the use site is
responsible for checking that the type information is valid before using
it. I.e. if you use stable map information, you'll have to add a
stability dependency (or make sure the map cannot transition).
Drive-by-improvement: Add ReferenceEqualTyper which takes input types
into account for improved constant folding.
Drive-by-fix: Apply policy mentioned above to JSNativeContextSpecialization.
R=jarin@chromium.org, rossberg@chromium.org
BUG=v8:4470
LOG=n
Review URL: https://codereview.chromium.org/1410953006
Cr-Commit-Position: refs/heads/master@{#31567}
From the Google C++ style guide: "You may not use a using-directive to
make all names from a namespace available". This would be covered by
presubmit linter checks if build/namespaces were not blacklisted.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1410073004
Cr-Commit-Position: refs/heads/master@{#31565}
