This prepares for pulling chromium's build as dependency for
gn. After this, the files in build and gypfiles need to stay
in sync until chromium is updated.
BUG=chromium:474921
LOG=n
Review-Url: https://codereview.chromium.org/1848553003
Cr-Commit-Position: refs/heads/master@{#35898}
This will allow to pull in gyp as a deps to the same location
as chromium (tools/gyp not build/gyp), needed for gn switch.
This is the first step of a 3-way move.
1) Copy v8.gyp in v8
2) Update references in embedders (follow up)
3) Remove old v8.gyp (follow up)
BUG=chromium:474921
LOG=n
NOTRY=true
Review URL: https://codereview.chromium.org/1920793002
Cr-Commit-Position: refs/heads/master@{#35760}
This introduces a compiler pass that schedules the graph and re-wires effect chain according to the schedule. It also connects allocating representation changes to the effect chain, and removes the BeginRegion and EndRegion nodes - they should not be needed anymore because all effectful nodes should be already wired-in.
This is an intermediate CL - the next step is to move lowering of the Change*ToTaggedEffect nodes to StateEffectIntroduction so that we do not have to introduce the effectful versions of nodes.
Review URL: https://codereview.chromium.org/1849603002
Cr-Commit-Position: refs/heads/master@{#35565}
This change implements switch as a balanced if/else tree or break table or
hybrid. A lot of asm.js modules are expected to extensively use switch
alongside function tables that can benefit from a better implementation.
BUG=v8:4203
TEST=mjsunit/asm-wasm
R=titzer@chromium.org,bradnelson@chromium.org,ahaas@chromium.org
LOG=N
Review URL: https://codereview.chromium.org/1838973002
Cr-Commit-Position: refs/heads/master@{#35455}
Enabled big endian testing for MIPS32 and MIPS64. The tests are also
adapted for big endian variant.
TEST=cctest/test-assembler-mips[64]
BUG=
Review URL: https://codereview.chromium.org/1867503002
Cr-Commit-Position: refs/heads/master@{#35369}
Now instead of saving all event details in the ring buffer,
we save only the bytes and duration.
This reduces the GCTracer size from 20K to 3K and simplifies code.
BUG=chromium:597310
LOG=NO
Review URL: https://codereview.chromium.org/1830723004
Cr-Commit-Position: refs/heads/master@{#35104}
This change introduces wide prefix bytecodes to support wide (16-bit)
and extra-wide (32-bit) operands. It retires the previous
wide-bytecodes and reduces the number of operand types.
Operands are now either scalable or fixed size. Scalable operands
increase in width when a bytecode is prefixed with wide or extra-wide.
The bytecode handler table is extended to 256*3 entries. The
first 256 entries are used for bytecodes with 8-bit operands,
the second 256 entries are used for bytecodes with operands that
scale to 16-bits, and the third group of 256 entries are used for
bytecodes with operands that scale to 32-bits.
LOG=N
BUG=v8:4747,v8:4280
Review URL: https://codereview.chromium.org/1783483002
Cr-Commit-Position: refs/heads/master@{#34955}
Now that we have page-local remembered sets (due to refilling in page
granularity) we can perform all updates on the sets during compaction in
parallel without caching slots locally.
BUG=chromium:524425
LOG=N
NOTRY=true
Review URL: https://codereview.chromium.org/1811573002
Cr-Commit-Position: refs/heads/master@{#34952}
Rename the existing (patching) ToBooleanStub to ToBooleanICStub to match
our naming convention, and add a new TurboFan-powered ToBooleanStub,
which just does the ToBoolean conversion without any runtime call or
code patching, so we can use it for Ignition (and TurboFan).
Drive-by-fix: Add an Oddball::to_boolean field similar to the ones we
already have for to_string and to_number, so we don't need to actually
dispatch on the concrete Oddball at all.
R=epertoso@chromium.org, rmcilroy@chromium.org, yangguo@chromium.org
Review URL: https://codereview.chromium.org/1744163002
Cr-Commit-Position: refs/heads/master@{#34361}
This reverts commit 9146bc5e20.
This contains a fix for the following crash:
1. We record slots for a fixed array.
2. We trim the fixed array, so that some recorded slots are now in free space.
3. During mark-compact we sweep the page with the fixed array. Now free list items contain memory with recorded slots.
4. We evacuate a byte array using the new free list items.
5. We iterate slots that are now inside the byte array and crash.
BUG=chromium:589413,chromium:578883
LOG=NO
Review URL: https://codereview.chromium.org/1735523002
Cr-Commit-Position: refs/heads/master@{#34302}
Reason for revert:
Build failure on Linux64 arm64 ASAN:
http://build.chromium.org/p/client.v8/builders/V8%20Linux64%20ASAN%20arm64%20-%20debug%20builder/builds/4829
(Leaks memory, somehow.)
Original issue's description:
> Encode interpreter::SourcePositionTable as variable-length ints.
>
> This reduces the memory consumption of SourcePositionTable by ca. 2/3.
> Over Octane, this reduces the source position table memory consumption
> from ~370kB to ~115kB, which makes it ca. 10% of the total bytecode size
> (~1.1MB)
>
> BUG=
>
> Committed: https://crrev.com/a6f41f7b8226555c5900440f6e3092b3545ee0f6
> Cr-Commit-Position: refs/heads/master@{#34250}
TBR=jochen@chromium.org,rmcilroy@chromium.org,yangguo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1728193003
Cr-Commit-Position: refs/heads/master@{#34251}
This reduces the memory consumption of SourcePositionTable by ca. 2/3.
Over Octane, this reduces the source position table memory consumption
from ~370kB to ~115kB, which makes it ca. 10% of the total bytecode size
(~1.1MB)
BUG=
Review URL: https://codereview.chromium.org/1704943002
Cr-Commit-Position: refs/heads/master@{#34250}
Reason for revert:
Revert because of canary crashes: crbug.com/589413
Original issue's description:
> Replace slots buffer with remembered set.
>
> Slots pointing to evacuation candidates are now recorded in the new RememberedSet<OLD_TO_OLD>.
>
> The remembered set is extended to support typed slots.
>
> During parallel evacuation all migration slots are recorded in local slots buffers.
> After evacuation all local slots are added to the remembered set.
>
> BUG=chromium:578883
> LOG=NO
>
> Committed: https://crrev.com/2285a99ef6f7d52f4f0c4d88a7db4224443ee152
> Cr-Commit-Position: refs/heads/master@{#34212}
TBR=jochen@chromium.org,hpayer@chromium.org,mlippautz@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:578883
Review URL: https://codereview.chromium.org/1725073003
Cr-Commit-Position: refs/heads/master@{#34238}
Slots pointing to evacuation candidates are now recorded in the new RememberedSet<OLD_TO_OLD>.
The remembered set is extended to support typed slots.
During parallel evacuation all migration slots are recorded in local slots buffers.
After evacuation all local slots are added to the remembered set.
BUG=chromium:578883
LOG=NO
Review URL: https://codereview.chromium.org/1703823002
Cr-Commit-Position: refs/heads/master@{#34212}
This reducer doesn't really add value, because:
(a) it is only concerned with JSCallFunction and JSToNumber, but when
we get to it, all JSCallFunction nodes will have been replaced by
Call nodes, and in the not so far future, we will also have
replaced almost all JSToNumber nodes with better code,
(b) and the reducer tries to be smart and use one of the outermost
contexts, but that might not be beneficial always; actually it
might even create longer live ranges and lead to more spilling
in some cases.
But most importantly, the JSContextRelaxation currently blocks inlining
based on SharedFunctionInfo, because it requires the inliner to check
the native context, which in turn requires JSFunction knowledge. So I'm
removing this reducer for now to unblock the more important inliner
changes.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1715633002
Cr-Commit-Position: refs/heads/master@{#34139}
Moves InterpreterAssembler out of the compiler directory and into the
interpreter directory. Makes InterpreterAssembler as subclass of
CodeStubAssembler.
As part of this change, the special bytecode dispatch linkage type
is removed and instead we use a InterfaceDispatchDescriptor and
a normal CodeStub linkage type.
Removes a bunch of duplicated logic in InterpreterAssembler and
instead uses the CodeStubAssembler logic. Refactors Interpreter
with these changes.
Modifies CodeStubAssembler to add the extra operations required
by the Interpreter (extra call types, raw memory access and some extra
binary ops). Also adds the ability for subclasses to add extra
prologue and epilogue operations around calls, which is required
for the Interpreter.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1673333004
Cr-Commit-Position: refs/heads/master@{#33873}
This moves the JSCreate related functionality from JSTypedLowering into
a dedicated JSCreateLowering reducer. This is in preparation of landing
the support for optimized literals in TurboFan, which would blow up
JSTypedLowering quite seriously otherwise.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1678833002
Cr-Commit-Position: refs/heads/master@{#33813}
This replaces the global remembered set with per-page remembered sets.
Each page in the old space, map space, and large object space keeps track of
the set of slots in the page pointing to the new space.
The data structure for storing slot sets is a two-level bitmap, which allows
us to remove the store buffer overflow and SCAN_ON_SCAVENGE logic.
Design doc: https://goo.gl/sMKCf7
BUG=chromium:578883
LOG=NO
Review URL: https://codereview.chromium.org/1608583002
Cr-Commit-Position: refs/heads/master@{#33806}
This increases the size of register operands to be 16-bit.
Not all bytecodes have wide register variants, so when they are
needed a register translator will copy them into a small area
reserved at the top of the 8-bit register range and these registers
are supplied as arguments to the bytecode with 8-bit operands.
This is non-intrusive for typical bytecode where the number of
registers is less than 120. For bytecodes with wide register
operands (above the window) their index needs to be translated
to avoid the reserved translation window.
Enables splay.js to run in Octane and a handful of mjsunit tests.
BUG=v8:4280,v8:4675
LOG=NO
Review URL: https://codereview.chromium.org/1613163002
Cr-Commit-Position: refs/heads/master@{#33516}
This CL implements loop assignment analysis, a pass over a loop's body
to record local variables that are assigned. This pre-pass is similar
to that done on the JavaScript AST for the same reason: avoid introducing
too many phis at loop headers when building a graph.
R=bradnelson@chromium.org,ahaas@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1617723003
Cr-Commit-Position: refs/heads/master@{#33486}
Split RegisterAllocationScope out of ExpressionResult and allocate one
for each statement. This ensures that we always have an outer register
allocation scope for statement code (used in CountOperation and
RegisterExecutionResult). Also refactored the register allocator code to
move it to it's own file and rename from TemporaryRegisterScope to
BytecodeRegisterAllocator.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1587033002
Cr-Commit-Position: refs/heads/master@{#33296}
This increases the size of addressable constant pool entries for jumps
to match other bytecodes using operands indexing the constant pool.
This change also introduces reservations for constant pool entries.
Reservations are used for forward jumps to ensure a constant pool entry
will be available when the jump target (label) is bound and the jump is
patched up in the bytecode array.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1546683002
Cr-Commit-Position: refs/heads/master@{#33125}
As discussed in person, this adds the code from v8-native-prototype into
V8 proper, guarded by GYP flags that do not build the code by default.
Passing wasm=on to 'make' or setting v8_wasm as a GYP flag activates
building of this code.
An additional header file is added to and exported from the compiler
directory, src/compiler/wasm-compiler.h. This exposes a limited interface
with opaque Node and Graph types to the decoder to build TF graphs, as
well as functions to compile WASM graphs.
The mjsunit tests added are blacklisted because they fail without the
WASM object exposed to JS, which is also disabled by the build config
option.
This corresponds closely to 5981e06ebc, with some formatting fixes and moving some files into src/compiler.
R=mstarzinger@chromium.org, bradnelson@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1504713014
Cr-Commit-Position: refs/heads/master@{#32794}
This is the first part of escape analysis for turbofan.
At the moment, there is no deopt support, and support
for loops is partial (only binary Phis are handled).
The CL includes 4 unittests.
There are also 8 new mjsunit tests, some of which are
skiped as they require features not yet implemented.
BUG=v8:4586
LOG=n
Review URL: https://codereview.chromium.org/1457683003
Cr-Commit-Position: refs/heads/master@{#32498}
Removing bytecode graph builder tests as they are high maintenance and
have limited use, ie they track changes in the implementation rather
than behaviour.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1477783003
Cr-Commit-Position: refs/heads/master@{#32333}
Reason for revert:
Unsound use of types in the MachineOperatorReducer. Will work on a sound solution with Fedor.
Original issue's description:
> [compiler] merge binary-operator-reducer
>
> Merge BinaryOperatorReducer into the MachineOperatorReducer class.
> It does not need `Revisit()` calls, because the newly inserted nodes are
> visited anyway, and there are no other methods that need AdvancedReducer
> there.
>
> BUG=
> R=titzer@chromium.org
>
> Committed: https://crrev.com/993ba9d2529a6401b3040b9263f8d06db7dbb4f1
> Cr-Commit-Position: refs/heads/master@{#32298}
TBR=titzer@chromium.org,fedor@indutny.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1476763006
Cr-Commit-Position: refs/heads/master@{#32310}
Merge BinaryOperatorReducer into the MachineOperatorReducer class.
It does not need `Revisit()` calls, because the newly inserted nodes are
visited anyway, and there are no other methods that need AdvancedReducer
there.
BUG=
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1473073004
Cr-Commit-Position: refs/heads/master@{#32298}
...based on the 2-lock algorithm by M. Scott and M. Michael (1992).
BUG=chromium:524425
LOG=N
Review URL: https://codereview.chromium.org/1448283004
Cr-Commit-Position: refs/heads/master@{#32078}
This change binds each {Cancelable} task to a so-called {CancelableTaskManager},
which is then used to handle concurrent cancelation as well as synchronizing
shutdown for already running tasks. Since ownership of tasks is transferred to
the platform executing a task (destructor), handling in the manager uses integer
ids. Note that this also mitigates (modulo integer size) the ABA problem.
All handling of {Cancelable} tasks is now encapsulated into the corresponding
manager, which is instantiated for each isolate.
R=hpayer@chromium.org
BUG=chromium:524425
LOG=N
CQ_EXTRA_TRYBOTS=tryserver.v8:v8_linux_arm64_gc_stress_dbg;tryserver.v8:v8_linux_gc_stress_dbg;tryserver.v8:v8_mac_gc_stress_dbg;tryserver.v8:v8_linux64_msan_rel;tryserver.v8:v8_linux64_tsan_rel;tryserver.v8:v8_mac64_asan_rel
Review URL: https://codereview.chromium.org/1409993012
Cr-Commit-Position: refs/heads/master@{#31997}
Both the JSTypeFeedbackSpecializer and the JSTypeFeedbackLowering is
dead code by now, since the more general JSNativeContextSpecialization
deals with the property/global load/store type feedback in a way that
also interacts properly with inlining.
BUG=v8:4470
LOG=n
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1407913003 .
Cr-Commit-Position: refs/heads/master@{#31462}
Removes a branch that checks for a condition that has been checked on dominators of the branch.
This introduces a new reducer that propagates the list of checked conditions (and their boolean values) through the control flow graph. If it encounters a branch checking a condition with a known value, the branch is eliminated.
The analysis relies on loops being reducible: if a condition has been checked on all paths to loop entry, then it is checked in the loop (regardless what of the conditions checked inside the loop).
The implementation is fairly naive and could be improved:
- all the operation on the condition lists could be made allocation-free when revisited.
- we could try to use a map structure rather than a linked list (to make
lookups faster).
- the merging of control flow could be changed to take into account
conditions from non-dominating paths (as long as all paths check
the condition).
Review URL: https://codereview.chromium.org/1376293005
Cr-Commit-Position: refs/heads/master@{#31347}
Reason for revert:
Prime suspect in breakage of V8 Linux -- no snap
Original issue's description:
> [swarming] Isolate v8 testing.
>
> Add gyp support and isolates for default test suites.
> Add two default isolates, one (default) for using the
> test suite collection we call "default" on the bots. One
> (developer_default) for also supporting the way developers
> call the driver (i.e. without argument, which includes
> the unittests).
>
> BUG=chromium:535160
> LOG=n
>
> Committed: https://crrev.com/9bd83f58f29ab0c7c5b71b00bcb1df3a9e641f05
> Cr-Commit-Position: refs/heads/master@{#31081}
TBR=tandrii@chromium.org,jochen@chromium.org,maruel@chromium.org,machenbach@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:535160
Review URL: https://codereview.chromium.org/1370993008
Cr-Commit-Position: refs/heads/master@{#31084}
Add gyp support and isolates for default test suites.
Add two default isolates, one (default) for using the
test suite collection we call "default" on the bots. One
(developer_default) for also supporting the way developers
call the driver (i.e. without argument, which includes
the unittests).
BUG=chromium:535160
LOG=n
Review URL: https://codereview.chromium.org/1380593002
Cr-Commit-Position: refs/heads/master@{#31081}
The comparison operators and ToBoolean are implemented by calling into
the runtime. There are new runtime methods are prefixed with Interpreter
to make use case clear.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1369123002
Cr-Commit-Position: refs/heads/master@{#30983}
